Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 137 insertions, 0 deletions

diff --git a/Documentation/leds/leds-lm3556.rst b/Documentation/leds/leds-lm3556.rst
new file mode 100644
index 0000000000..32e3983473
--- /dev/null
+++ b/Documentation/leds/leds-lm3556.rst
@@ -0,0 +1,137 @@
+========================
+Kernel driver for lm3556
+========================
+
+* Texas Instrument:
+  1.5 A Synchronous Boost LED Flash Driver w/ High-Side Current Source
+* Datasheet: http://www.national.com/ds/LM/LM3556.pdf
+
+Authors:
+      - Daniel Jeong
+
+	Contact:Daniel Jeong(daniel.jeong-at-ti.com, gshark.jeong-at-gmail.com)
+
+Description
+-----------
+There are 3 functions in LM3556, Flash, Torch and Indicator.
+
+Flash Mode
+^^^^^^^^^^
+
+In Flash Mode, the LED current source(LED) provides 16 target current levels
+from 93.75 mA to 1500 mA.The Flash currents are adjusted via the CURRENT
+CONTROL REGISTER(0x09).Flash mode is activated by the ENABLE REGISTER(0x0A),
+or by pulling the STROBE pin HIGH.
+
+LM3556 Flash can be controlled through /sys/class/leds/flash/brightness file
+
+* if STROBE pin is enabled, below example control brightness only, and
+  ON / OFF will be controlled by STROBE pin.
+
+Flash Example:
+
+OFF::
+
+	#echo 0 > /sys/class/leds/flash/brightness
+
+93.75 mA::
+
+	#echo 1 > /sys/class/leds/flash/brightness
+
+...
+
+1500  mA::
+
+	#echo 16 > /sys/class/leds/flash/brightness
+
+Torch Mode
+^^^^^^^^^^
+
+In Torch Mode, the current source(LED) is programmed via the CURRENT CONTROL
+REGISTER(0x09).Torch Mode is activated by the ENABLE REGISTER(0x0A) or by the
+hardware TORCH input.
+
+LM3556 torch can be controlled through /sys/class/leds/torch/brightness file.
+* if TORCH pin is enabled, below example control brightness only,
+and ON / OFF will be controlled by TORCH pin.
+
+Torch Example:
+
+OFF::
+
+	#echo 0 > /sys/class/leds/torch/brightness
+
+46.88 mA::
+
+	#echo 1 > /sys/class/leds/torch/brightness
+
+...
+
+375 mA::
+
+	#echo 8 > /sys/class/leds/torch/brightness
+
+Indicator Mode
+^^^^^^^^^^^^^^
+
+Indicator pattern can be set through /sys/class/leds/indicator/pattern file,
+and 4 patterns are pre-defined in indicator_pattern array.
+
+According to N-lank, Pulse time and N Period values, different pattern wiill
+be generated.If you want new patterns for your own device, change
+indicator_pattern array with your own values and INDIC_PATTERN_SIZE.
+
+Please refer datasheet for more detail about N-Blank, Pulse time and N Period.
+
+Indicator pattern example:
+
+pattern 0::
+
+	#echo 0 > /sys/class/leds/indicator/pattern
+
+...
+
+pattern 3::
+
+	#echo 3 > /sys/class/leds/indicator/pattern
+
+Indicator brightness can be controlled through
+sys/class/leds/indicator/brightness file.
+
+Example:
+
+OFF::
+
+	#echo 0 > /sys/class/leds/indicator/brightness
+
+5.86 mA::
+
+	#echo 1 > /sys/class/leds/indicator/brightness
+
+...
+
+46.875mA::
+
+	#echo 8 > /sys/class/leds/indicator/brightness
+
+Notes
+-----
+Driver expects it is registered using the i2c_board_info mechanism.
+To register the chip at address 0x63 on specific adapter, set the platform data
+according to include/linux/platform_data/leds-lm3556.h, set the i2c board info
+
+Example::
+
+	static struct i2c_board_info board_i2c_ch4[] __initdata = {
+		{
+			 I2C_BOARD_INFO(LM3556_NAME, 0x63),
+			 .platform_data = &lm3556_pdata,
+		 },
+	};
+
+and register it in the platform init function
+
+Example::
+
+	board_register_i2c_bus(4, 400,
+				board_i2c_ch4, ARRAY_SIZE(board_i2c_ch4));