Merging upstream version 6.7.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 0 insertions, 108 deletions

diff --git a/Documentation/misc-devices/eeprom.rst b/Documentation/misc-devices/eeprom.rst
deleted file mode 100644
index 008249675c..0000000000
--- a/Documentation/misc-devices/eeprom.rst
+++ /dev/null
@@ -1,107 +0,0 @@
-====================
-Kernel driver eeprom
-====================
-
-Supported chips:
-
-  * Any EEPROM chip in the designated address range
-
-    Prefix: 'eeprom'
-
-    Addresses scanned: I2C 0x50 - 0x57
-
-    Datasheets: Publicly available from:
-
-                Atmel (www.atmel.com),
-                Catalyst (www.catsemi.com),
-                Fairchild (www.fairchildsemi.com),
-                Microchip (www.microchip.com),
-                Philips (www.semiconductor.philips.com),
-                Rohm (www.rohm.com),
-                ST (www.st.com),
-                Xicor (www.xicor.com),
-                and others.
-
-        ========= ============= ============================================
-        Chip      Size (bits)   Address
-        ========= ============= ============================================
-        24C01     1K            0x50 (shadows at 0x51 - 0x57)
-        24C01A    1K            0x50 - 0x57 (Typical device on DIMMs)
-        24C02     2K            0x50 - 0x57
-        24C04     4K            0x50, 0x52, 0x54, 0x56
-                                (additional data at 0x51, 0x53, 0x55, 0x57)
-        24C08     8K            0x50, 0x54 (additional data at 0x51, 0x52,
-                                0x53, 0x55, 0x56, 0x57)
-        24C16     16K           0x50 (additional data at 0x51 - 0x57)
-        Sony      2K            0x57
-
-        Atmel     34C02B  2K    0x50 - 0x57, SW write protect at 0x30-37
-        Catalyst  34FC02  2K    0x50 - 0x57, SW write protect at 0x30-37
-        Catalyst  34RC02  2K    0x50 - 0x57, SW write protect at 0x30-37
-        Fairchild 34W02   2K    0x50 - 0x57, SW write protect at 0x30-37
-        Microchip 24AA52  2K    0x50 - 0x57, SW write protect at 0x30-37
-        ST        M34C02  2K    0x50 - 0x57, SW write protect at 0x30-37
-        ========= ============= ============================================
-
-
-Authors:
-        - Frodo Looijaard <frodol@dds.nl>,
-        - Philip Edelbrock <phil@netroedge.com>,
-        - Jean Delvare <jdelvare@suse.de>,
-        - Greg Kroah-Hartman <greg@kroah.com>,
-        - IBM Corp.
-
-Description
------------
-
-This is a simple EEPROM module meant to enable reading the first 256 bytes
-of an EEPROM (on a SDRAM DIMM for example). However, it will access serial
-EEPROMs on any I2C adapter. The supported devices are generically called
-24Cxx, and are listed above; however the numbering for these
-industry-standard devices may vary by manufacturer.
-
-This module was a programming exercise to get used to the new project
-organization laid out by Frodo, but it should be at least completely
-effective for decoding the contents of EEPROMs on DIMMs.
-
-DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants.
-The other devices will not be found on a DIMM because they respond to more
-than one address.
-
-DDC Monitors may contain any device. Often a 24C01, which responds to all 8
-addresses, is found.
-
-Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the
-specification, so it is guess work and far from being complete.
-
-The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional
-software write protect register at 0x30 - 0x37 (0x20 less than the memory
-location). The chip responds to "write quick" detection at this address but
-does not respond to byte reads. If this register is present, the lower 128
-bytes of the memory array are not write protected. Any byte data write to
-this address will write protect the memory array permanently, and the
-device will no longer respond at the 0x30-37 address. The eeprom driver
-does not support this register.
-
-Lacking functionality
----------------------
-
-* Full support for larger devices (24C04, 24C08, 24C16). These are not
-  typically found on a PC. These devices will appear as separate devices at
-  multiple addresses.
-
-* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512).
-  These devices require two-byte address fields and are not supported.
-
-* Enable Writing. Again, no technical reason why not, but making it easy
-  to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy
-  to disable the DIMMs (potentially preventing the computer from booting)
-  until the values are restored somehow.
-
-Use
----
-
-After inserting the module (and any other required SMBus/i2c modules), you
-should have some EEPROM directories in ``/sys/bus/i2c/devices/*`` of names such
-as "0-0050". Inside each of these is a series of files, the eeprom file
-contains the binary data from EEPROM.
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index ecc40fbbcf..7de1679798 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -17,7 +17,6 @@ fit into other categories.
    ad525x_dpot
    apds990x
    bh1770glc
-   eeprom
    c2port
    dw-xdata-pcie
    ibmvmc