diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/mm/damon/design.rst | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/mm/damon/design.rst')
-rw-r--r-- | Documentation/mm/damon/design.rst | 473 |
1 files changed, 473 insertions, 0 deletions
diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst new file mode 100644 index 0000000000..a20383d01a --- /dev/null +++ b/Documentation/mm/damon/design.rst @@ -0,0 +1,473 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====== +Design +====== + + +Overall Architecture +==================== + +DAMON subsystem is configured with three layers including + +- Operations Set: Implements fundamental operations for DAMON that depends on + the given monitoring target address-space and available set of + software/hardware primitives, +- Core: Implements core logics including monitoring overhead/accurach control + and access-aware system operations on top of the operations set layer, and +- Modules: Implements kernel modules for various purposes that provides + interfaces for the user space, on top of the core layer. + + +Configurable Operations Set +--------------------------- + +For data access monitoring and additional low level work, DAMON needs a set of +implementations for specific operations that are dependent on and optimized for +the given target address space. On the other hand, the accuracy and overhead +tradeoff mechanism, which is the core logic of DAMON, is in the pure logic +space. DAMON separates the two parts in different layers, namely DAMON +Operations Set and DAMON Core Logics Layers, respectively. It further defines +the interface between the layers to allow various operations sets to be +configured with the core logic. + +Due to this design, users can extend DAMON for any address space by configuring +the core logic to use the appropriate operations set. If any appropriate set +is unavailable, users can implement one on their own. + +For example, physical memory, virtual memory, swap space, those for specific +processes, NUMA nodes, files, and backing memory devices would be supportable. +Also, if some architectures or devices supporting special optimized access +check primitives, those will be easily configurable. + + +Programmable Modules +-------------------- + +Core layer of DAMON is implemented as a framework, and exposes its application +programming interface to all kernel space components such as subsystems and +modules. For common use cases of DAMON, DAMON subsystem provides kernel +modules that built on top of the core layer using the API, which can be easily +used by the user space end users. + + +Operations Set Layer +==================== + +The monitoring operations are defined in two parts: + +1. Identification of the monitoring target address range for the address space. +2. Access check of specific address range in the target space. + +DAMON currently provides the implementations of the operations for the physical +and virtual address spaces. Below two subsections describe how those work. + + +VMA-based Target Address Range Construction +------------------------------------------- + +This is only for the virtual address space monitoring operations +implementation. That for the physical address space simply asks users to +manually set the monitoring target address ranges. + +Only small parts in the super-huge virtual address space of the processes are +mapped to the physical memory and accessed. Thus, tracking the unmapped +address regions is just wasteful. However, because DAMON can deal with some +level of noise using the adaptive regions adjustment mechanism, tracking every +mapping is not strictly required but could even incur a high overhead in some +cases. That said, too huge unmapped areas inside the monitoring target should +be removed to not take the time for the adaptive mechanism. + +For the reason, this implementation converts the complex mappings to three +distinct regions that cover every mapped area of the address space. The two +gaps between the three regions are the two biggest unmapped areas in the given +address space. The two biggest unmapped areas would be the gap between the +heap and the uppermost mmap()-ed region, and the gap between the lowermost +mmap()-ed region and the stack in most of the cases. Because these gaps are +exceptionally huge in usual address spaces, excluding these will be sufficient +to make a reasonable trade-off. Below shows this in detail:: + + <heap> + <BIG UNMAPPED REGION 1> + <uppermost mmap()-ed region> + (small mmap()-ed regions and munmap()-ed regions) + <lowermost mmap()-ed region> + <BIG UNMAPPED REGION 2> + <stack> + + +PTE Accessed-bit Based Access Check +----------------------------------- + +Both of the implementations for physical and virtual address spaces use PTE +Accessed-bit for basic access checks. Only one difference is the way of +finding the relevant PTE Accessed bit(s) from the address. While the +implementation for the virtual address walks the page table for the target task +of the address, the implementation for the physical address walks every page +table having a mapping to the address. In this way, the implementations find +and clear the bit(s) for next sampling target address and checks whether the +bit(s) set again after one sampling period. This could disturb other kernel +subsystems using the Accessed bits, namely Idle page tracking and the reclaim +logic. DAMON does nothing to avoid disturbing Idle page tracking, so handling +the interference is the responsibility of sysadmins. However, it solves the +conflict with the reclaim logic using ``PG_idle`` and ``PG_young`` page flags, +as Idle page tracking does. + + +Core Logics +=========== + + +Monitoring +---------- + +Below four sections describe each of the DAMON core mechanisms and the five +monitoring attributes, ``sampling interval``, ``aggregation interval``, +``update interval``, ``minimum number of regions``, and ``maximum number of +regions``. + + +Access Frequency Monitoring +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The output of DAMON says what pages are how frequently accessed for a given +duration. The resolution of the access frequency is controlled by setting +``sampling interval`` and ``aggregation interval``. In detail, DAMON checks +access to each page per ``sampling interval`` and aggregates the results. In +other words, counts the number of the accesses to each page. After each +``aggregation interval`` passes, DAMON calls callback functions that previously +registered by users so that users can read the aggregated results and then +clears the results. This can be described in below simple pseudo-code:: + + while monitoring_on: + for page in monitoring_target: + if accessed(page): + nr_accesses[page] += 1 + if time() % aggregation_interval == 0: + for callback in user_registered_callbacks: + callback(monitoring_target, nr_accesses) + for page in monitoring_target: + nr_accesses[page] = 0 + sleep(sampling interval) + +The monitoring overhead of this mechanism will arbitrarily increase as the +size of the target workload grows. + + +Region Based Sampling +~~~~~~~~~~~~~~~~~~~~~ + +To avoid the unbounded increase of the overhead, DAMON groups adjacent pages +that assumed to have the same access frequencies into a region. As long as the +assumption (pages in a region have the same access frequencies) is kept, only +one page in the region is required to be checked. Thus, for each ``sampling +interval``, DAMON randomly picks one page in each region, waits for one +``sampling interval``, checks whether the page is accessed meanwhile, and +increases the access frequency of the region if so. Therefore, the monitoring +overhead is controllable by setting the number of regions. DAMON allows users +to set the minimum and the maximum number of regions for the trade-off. + +This scheme, however, cannot preserve the quality of the output if the +assumption is not guaranteed. + + +Adaptive Regions Adjustment +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Even somehow the initial monitoring target regions are well constructed to +fulfill the assumption (pages in same region have similar access frequencies), +the data access pattern can be dynamically changed. This will result in low +monitoring quality. To keep the assumption as much as possible, DAMON +adaptively merges and splits each region based on their access frequency. + +For each ``aggregation interval``, it compares the access frequencies of +adjacent regions and merges those if the frequency difference is small. Then, +after it reports and clears the aggregated access frequency of each region, it +splits each region into two or three regions if the total number of regions +will not exceed the user-specified maximum number of regions after the split. + +In this way, DAMON provides its best-effort quality and minimal overhead while +keeping the bounds users set for their trade-off. + + +Age Tracking +~~~~~~~~~~~~ + +By analyzing the monitoring results, users can also find how long the current +access pattern of a region has maintained. That could be used for good +understanding of the access pattern. For example, page placement algorithm +utilizing both the frequency and the recency could be implemented using that. +To make such access pattern maintained period analysis easier, DAMON maintains +yet another counter called ``age`` in each region. For each ``aggregation +interval``, DAMON checks if the region's size and access frequency +(``nr_accesses``) has significantly changed. If so, the counter is reset to +zero. Otherwise, the counter is increased. + + +Dynamic Target Space Updates Handling +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The monitoring target address range could dynamically changed. For example, +virtual memory could be dynamically mapped and unmapped. Physical memory could +be hot-plugged. + +As the changes could be quite frequent in some cases, DAMON allows the +monitoring operations to check dynamic changes including memory mapping changes +and applies it to monitoring operations-related data structures such as the +abstracted monitoring target memory area only for each of a user-specified time +interval (``update interval``). + + +.. _damon_design_damos: + +Operation Schemes +----------------- + +One common purpose of data access monitoring is access-aware system efficiency +optimizations. For example, + + paging out memory regions that are not accessed for more than two minutes + +or + + using THP for memory regions that are larger than 2 MiB and showing a high + access frequency for more than one minute. + +One straightforward approach for such schemes would be profile-guided +optimizations. That is, getting data access monitoring results of the +workloads or the system using DAMON, finding memory regions of special +characteristics by profiling the monitoring results, and making system +operation changes for the regions. The changes could be made by modifying or +providing advice to the software (the application and/or the kernel), or +reconfiguring the hardware. Both offline and online approaches could be +available. + +Among those, providing advice to the kernel at runtime would be flexible and +effective, and therefore widely be used. However, implementing such schemes +could impose unnecessary redundancy and inefficiency. The profiling could be +redundant if the type of interest is common. Exchanging the information +including monitoring results and operation advice between kernel and user +spaces could be inefficient. + +To allow users to reduce such redundancy and inefficiencies by offloading the +works, DAMON provides a feature called Data Access Monitoring-based Operation +Schemes (DAMOS). It lets users specify their desired schemes at a high +level. For such specifications, DAMON starts monitoring, finds regions having +the access pattern of interest, and applies the user-desired operation actions +to the regions as soon as found. + + +.. _damon_design_damos_action: + +Operation Action +~~~~~~~~~~~~~~~~ + +The management action that the users desire to apply to the regions of their +interest. For example, paging out, prioritizing for next reclamation victim +selection, advising ``khugepaged`` to collapse or split, or doing nothing but +collecting statistics of the regions. + +The list of supported actions is defined in DAMOS, but the implementation of +each action is in the DAMON operations set layer because the implementation +normally depends on the monitoring target address space. For example, the code +for paging specific virtual address ranges out would be different from that for +physical address ranges. And the monitoring operations implementation sets are +not mandated to support all actions of the list. Hence, the availability of +specific DAMOS action depends on what operations set is selected to be used +together. + +Applying an action to a region is considered as changing the region's +characteristics. Hence, DAMOS resets the age of regions when an action is +applied to those. + + +.. _damon_design_damos_access_pattern: + +Target Access Pattern +~~~~~~~~~~~~~~~~~~~~~ + +The access pattern of the schemes' interest. The patterns are constructed with +the properties that DAMON's monitoring results provide, specifically the size, +the access frequency, and the age. Users can describe their access pattern of +interest by setting minimum and maximum values of the three properties. If a +region's three properties are in the ranges, DAMOS classifies it as one of the +regions that the scheme is having an interest in. + + +.. _damon_design_damos_quotas: + +Quotas +~~~~~~ + +DAMOS upper-bound overhead control feature. DAMOS could incur high overhead if +the target access pattern is not properly tuned. For example, if a huge memory +region having the access pattern of interest is found, applying the scheme's +action to all pages of the huge region could consume unacceptably large system +resources. Preventing such issues by tuning the access pattern could be +challenging, especially if the access patterns of the workloads are highly +dynamic. + +To mitigate that situation, DAMOS provides an upper-bound overhead control +feature called quotas. It lets users specify an upper limit of time that DAMOS +can use for applying the action, and/or a maximum bytes of memory regions that +the action can be applied within a user-specified time duration. + + +.. _damon_design_damos_quotas_prioritization: + +Prioritization +^^^^^^^^^^^^^^ + +A mechanism for making a good decision under the quotas. When the action +cannot be applied to all regions of interest due to the quotas, DAMOS +prioritizes regions and applies the action to only regions having high enough +priorities so that it will not exceed the quotas. + +The prioritization mechanism should be different for each action. For example, +rarely accessed (colder) memory regions would be prioritized for page-out +scheme action. In contrast, the colder regions would be deprioritized for huge +page collapse scheme action. Hence, the prioritization mechanisms for each +action are implemented in each DAMON operations set, together with the actions. + +Though the implementation is up to the DAMON operations set, it would be common +to calculate the priority using the access pattern properties of the regions. +Some users would want the mechanisms to be personalized for their specific +case. For example, some users would want the mechanism to weigh the recency +(``age``) more than the access frequency (``nr_accesses``). DAMOS allows users +to specify the weight of each access pattern property and passes the +information to the underlying mechanism. Nevertheless, how and even whether +the weight will be respected are up to the underlying prioritization mechanism +implementation. + + +.. _damon_design_damos_watermarks: + +Watermarks +~~~~~~~~~~ + +Conditional DAMOS (de)activation automation. Users might want DAMOS to run +only under certain situations. For example, when a sufficient amount of free +memory is guaranteed, running a scheme for proactive reclamation would only +consume unnecessary system resources. To avoid such consumption, the user would +need to manually monitor some metrics such as free memory ratio, and turn +DAMON/DAMOS on or off. + +DAMOS allows users to offload such works using three watermarks. It allows the +users to configure the metric of their interest, and three watermark values, +namely high, middle, and low. If the value of the metric becomes above the +high watermark or below the low watermark, the scheme is deactivated. If the +metric becomes below the mid watermark but above the low watermark, the scheme +is activated. If all schemes are deactivated by the watermarks, the monitoring +is also deactivated. In this case, the DAMON worker thread only periodically +checks the watermarks and therefore incurs nearly zero overhead. + + +.. _damon_design_damos_filters: + +Filters +~~~~~~~ + +Non-access pattern-based target memory regions filtering. If users run +self-written programs or have good profiling tools, they could know something +more than the kernel, such as future access patterns or some special +requirements for specific types of memory. For example, some users may know +only anonymous pages can impact their program's performance. They can also +have a list of latency-critical processes. + +To let users optimize DAMOS schemes with such special knowledge, DAMOS provides +a feature called DAMOS filters. The feature allows users to set an arbitrary +number of filters for each scheme. Each filter specifies the type of target +memory, and whether it should exclude the memory of the type (filter-out), or +all except the memory of the type (filter-in). + +Currently, anonymous page, memory cgroup, address range, and DAMON monitoring +target type filters are supported by the feature. Some filter target types +require additional arguments. The memory cgroup filter type asks users to +specify the file path of the memory cgroup for the filter. The address range +type asks the start and end addresses of the range. The DAMON monitoring +target type asks the index of the target from the context's monitoring targets +list. Hence, users can apply specific schemes to only anonymous pages, +non-anonymous pages, pages of specific cgroups, all pages excluding those of +specific cgroups, pages in specific address range, pages in specific DAMON +monitoring targets, and any combination of those. + +To handle filters efficiently, the address range and DAMON monitoring target +type filters are handled by the core layer, while others are handled by +operations set. If a memory region is filtered by a core layer-handled filter, +it is not counted as the scheme has tried to the region. In contrast, if a +memory regions is filtered by an operations set layer-handled filter, it is +counted as the scheme has tried. The difference in accounting leads to changes +in the statistics. + + +Application Programming Interface +--------------------------------- + +The programming interface for kernel space data access-aware applications. +DAMON is a framework, so it does nothing by itself. Instead, it only helps +other kernel components such as subsystems and modules building their data +access-aware applications using DAMON's core features. For this, DAMON exposes +its all features to other kernel components via its application programming +interface, namely ``include/linux/damon.h``. Please refer to the API +:doc:`document </mm/damon/api>` for details of the interface. + + +Modules +======= + +Because the core of DAMON is a framework for kernel components, it doesn't +provide any direct interface for the user space. Such interfaces should be +implemented by each DAMON API user kernel components, instead. DAMON subsystem +itself implements such DAMON API user modules, which are supposed to be used +for general purpose DAMON control and special purpose data access-aware system +operations, and provides stable application binary interfaces (ABI) for the +user space. The user space can build their efficient data access-aware +applications using the interfaces. + + +General Purpose User Interface Modules +-------------------------------------- + +DAMON modules that provide user space ABIs for general purpose DAMON usage in +runtime. + +DAMON user interface modules, namely 'DAMON sysfs interface' and 'DAMON debugfs +interface' are DAMON API user kernel modules that provide ABIs to the +user-space. Please note that DAMON debugfs interface is currently deprecated. + +Like many other ABIs, the modules create files on sysfs and debugfs, allow +users to specify their requests to and get the answers from DAMON by writing to +and reading from the files. As a response to such I/O, DAMON user interface +modules control DAMON and retrieve the results as user requested via the DAMON +API, and return the results to the user-space. + +The ABIs are designed to be used for user space applications development, +rather than human beings' fingers. Human users are recommended to use such +user space tools. One such Python-written user space tool is available at +Github (https://github.com/awslabs/damo), Pypi +(https://pypistats.org/packages/damo), and Fedora +(https://packages.fedoraproject.org/pkgs/python-damo/damo/). + +Please refer to the ABI :doc:`document </admin-guide/mm/damon/usage>` for +details of the interfaces. + + +Special-Purpose Access-aware Kernel Modules +------------------------------------------- + +DAMON modules that provide user space ABI for specific purpose DAMON usage. + +DAMON sysfs/debugfs user interfaces are for full control of all DAMON features +in runtime. For each special-purpose system-wide data access-aware system +operations such as proactive reclamation or LRU lists balancing, the interfaces +could be simplified by removing unnecessary knobs for the specific purpose, and +extended for boot-time and even compile time control. Default values of DAMON +control parameters for the usage would also need to be optimized for the +purpose. + +To support such cases, yet more DAMON API user kernel modules that provide more +simple and optimized user space interfaces are available. Currently, two +modules for proactive reclamation and LRU lists manipulation are provided. For +more detail, please read the usage documents for those +(:doc:`/admin-guide/mm/damon/reclaim` and +:doc:`/admin-guide/mm/damon/lru_sort`). |