Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 116 insertions, 4 deletions

diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
index b842bcb142..a4c7d0c65f 100644
--- a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
+++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -211,10 +211,16 @@ Documentation/networking/net_dim.rst
 
 RX copybreak
 ============
+
 The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK
 and can be configured by the ETHTOOL_STUNABLE command of the
 SIOCETHTOOL ioctl.
 
+This option controls the maximum packet length for which the RX
+descriptor it was received on would be recycled. When a packet smaller
+than RX copybreak bytes is received, it is copied into a new memory
+buffer and the RX descriptor is returned to HW.
+
 Statistics
 ==========
 
diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst
index 43de285b8a..6932d8c043 100644
--- a/Documentation/networking/device_drivers/ethernet/index.rst
+++ b/Documentation/networking/device_drivers/ethernet/index.rst
@@ -42,6 +42,7 @@ Contents:
    intel/ice
    marvell/octeontx2
    marvell/octeon_ep
+   marvell/octeon_ep_vf
    mellanox/mlx5/index
    microsoft/netvsc
    neterion/s2io
diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst
index 5038e54586..934752f675 100644
--- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst
+++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst
@@ -368,15 +368,28 @@ more options for Receive Side Scaling (RSS) hash byte configuration.
   # ethtool -N <ethX> rx-flow-hash <type> <option>
 
   Where <type> is:
-    tcp4  signifying TCP over IPv4
-    udp4  signifying UDP over IPv4
-    tcp6  signifying TCP over IPv6
-    udp6  signifying UDP over IPv6
+    tcp4    signifying TCP over IPv4
+    udp4    signifying UDP over IPv4
+    gtpc4   signifying GTP-C over IPv4
+    gtpc4t  signifying GTP-C (include TEID) over IPv4
+    gtpu4   signifying GTP-U over IPV4
+    gtpu4e  signifying GTP-U and Extension Header over IPV4
+    gtpu4u  signifying GTP-U PSC Uplink over IPV4
+    gtpu4d  signifying GTP-U PSC Downlink over IPV4
+    tcp6    signifying TCP over IPv6
+    udp6    signifying UDP over IPv6
+    gtpc6   signifying GTP-C over IPv6
+    gtpc6t  signifying GTP-C (include TEID) over IPv6
+    gtpu6   signifying GTP-U over IPV6
+    gtpu6e  signifying GTP-U and Extension Header over IPV6
+    gtpu6u  signifying GTP-U PSC Uplink over IPV6
+    gtpu6d  signifying GTP-U PSC Downlink over IPV6
   And <option> is one or more of:
     s     Hash on the IP source address of the Rx packet.
     d     Hash on the IP destination address of the Rx packet.
     f     Hash on bytes 0 and 1 of the Layer 4 header of the Rx packet.
     n     Hash on bytes 2 and 3 of the Layer 4 header of the Rx packet.
+    e     Hash on GTP Packet on TEID (4bytes) of the Rx packet.
 
 
 Accelerated Receive Flow Steering (aRFS)
diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst
new file mode 100644
index 0000000000..603133d0b9
--- /dev/null
+++ b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+=======================================================================
+Linux kernel networking driver for Marvell's Octeon PCI Endpoint NIC VF
+=======================================================================
+
+Network driver for Marvell's Octeon PCI EndPoint NIC VF.
+Copyright (c) 2020 Marvell International Ltd.
+
+Overview
+========
+This driver implements networking functionality of Marvell's Octeon PCI
+EndPoint NIC VF.
+
+Supported Devices
+=================
+Currently, this driver support following devices:
+ * Network controller: Cavium, Inc. Device b203
+ * Network controller: Cavium, Inc. Device b403
+ * Network controller: Cavium, Inc. Device b103
+ * Network controller: Cavium, Inc. Device b903
+ * Network controller: Cavium, Inc. Device ba03
+ * Network controller: Cavium, Inc. Device bc03
+ * Network controller: Cavium, Inc. Device bd03
diff --git a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
index 6ec7d686ef..05fe2b11bb 100644
--- a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
+++ b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
@@ -99,6 +99,12 @@ Minimal SR-IOV support is currently offered and can be enabled by setting
 the sysfs 'sriov_numvfs' value, if supported by your particular firmware
 configuration.
 
+XDP
+---
+
+Support for XDP includes the basics, plus Jumbo frames, Redirect and
+ndo_xmit.  There is no current support for zero-copy sockets or HW offload.
+
 Statistics
 ==========
 
@@ -138,6 +144,12 @@ Driver port specific::
      rx_csum_none: 0
      rx_csum_complete: 3
      rx_csum_error: 0
+     xdp_drop: 0
+     xdp_aborted: 0
+     xdp_pass: 0
+     xdp_tx: 0
+     xdp_redirect: 0
+     xdp_frames: 0
 
 Driver queue specific::
 
@@ -149,9 +161,12 @@ Driver queue specific::
      tx_0_frags: 0
      tx_0_tso: 0
      tx_0_tso_bytes: 0
+     tx_0_hwstamp_valid: 0
+     tx_0_hwstamp_invalid: 0
      tx_0_csum_none: 3
      tx_0_csum: 0
      tx_0_vlan_inserted: 0
+     tx_0_xdp_frames: 0
      rx_0_pkts: 2
      rx_0_bytes: 120
      rx_0_dma_map_err: 0
@@ -159,8 +174,15 @@ Driver queue specific::
      rx_0_csum_none: 0
      rx_0_csum_complete: 0
      rx_0_csum_error: 0
+     rx_0_hwstamp_valid: 0
+     rx_0_hwstamp_invalid: 0
      rx_0_dropped: 0
      rx_0_vlan_stripped: 0
+     rx_0_xdp_drop: 0
+     rx_0_xdp_aborted: 0
+     rx_0_xdp_pass: 0
+     rx_0_xdp_tx: 0
+     rx_0_xdp_redirect: 0
 
 Firmware port specific::
 
diff --git a/Documentation/networking/device_drivers/wwan/t7xx.rst b/Documentation/networking/device_drivers/wwan/t7xx.rst
index dd5b731957..f346f5f85f 100644
--- a/Documentation/networking/device_drivers/wwan/t7xx.rst
+++ b/Documentation/networking/device_drivers/wwan/t7xx.rst
@@ -39,6 +39,34 @@ command and receive response:
 
 - open the AT control channel using a UART tool or a special user tool
 
+Sysfs
+=====
+The driver provides sysfs interfaces to userspace.
+
+t7xx_mode
+---------
+The sysfs interface provides userspace with access to the device mode, this interface
+supports read and write operations.
+
+Device mode:
+
+- ``unknown`` represents that device in unknown status
+- ``ready`` represents that device in ready status
+- ``reset`` represents that device in reset status
+- ``fastboot_switching`` represents that device in fastboot switching status
+- ``fastboot_download`` represents that device in fastboot download status
+- ``fastboot_dump`` represents that device in fastboot dump status
+
+Read from userspace to get the current device mode.
+
+::
+  $ cat /sys/bus/pci/devices/${bdf}/t7xx_mode
+
+Write from userspace to set the device mode.
+
+::
+  $ echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode
+
 Management application development
 ==================================
 The driver and userspace interfaces are described below. The MBIM protocol is
@@ -97,6 +125,20 @@ The driver exposes an AT port by implementing AT WWAN Port.
 The userspace end of the control port is a /dev/wwan0at0 character
 device. Application shall use this interface to issue AT commands.
 
+fastboot port userspace ABI
+---------------------------
+
+/dev/wwan0fastboot0 character device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver exposes a fastboot protocol interface by implementing
+fastboot WWAN Port. The userspace end of the fastboot channel pipe is a
+/dev/wwan0fastboot0 character device. Application shall use this interface for
+fastboot protocol communication.
+
+Please note that driver needs to be reloaded to export /dev/wwan0fastboot0
+port, because device needs a cold reset after enter ``fastboot_switching``
+mode.
+
 The MediaTek's T700 modem supports the 3GPP TS 27.007 [4] specification.
 
 References
@@ -118,3 +160,7 @@ speak the Mobile Interface Broadband Model (MBIM) protocol"*
 [4] *Specification # 27.007 - 3GPP*
 
 - https://www.3gpp.org/DynaReport/27007.htm
+
+[5] *fastboot "a mechanism for communicating with bootloaders"*
+
+- https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.md