diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:03 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:03 +0000 |
commit | 01a69402cf9d38ff180345d55c2ee51c7e89fbc7 (patch) | |
tree | b406c5242a088c4f59c6e4b719b783f43aca6ae9 /Documentation/networking/device_drivers | |
parent | Adding upstream version 6.7.12. (diff) | |
download | linux-01a69402cf9d38ff180345d55c2ee51c7e89fbc7.tar.xz linux-01a69402cf9d38ff180345d55c2ee51c7e89fbc7.zip |
Adding upstream version 6.8.9.upstream/6.8.9
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/networking/device_drivers')
5 files changed, 147 insertions, 166 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst index 5eaa3ab6c7..b842bcb142 100644 --- a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst +++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst @@ -54,6 +54,7 @@ ena_common_defs.h Common definitions for ena_com layer. ena_regs_defs.h Definition of ENA PCI memory-mapped (MMIO) registers. ena_netdev.[ch] Main Linux kernel driver. ena_ethtool.c ethtool callbacks. +ena_xdp.[ch] XDP files ena_pci_id_tbl.h Supported device IDs. ================= ====================================================== diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst index e4d065c55e..5038e54586 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst @@ -895,6 +895,147 @@ driver writes raw bytes by the GNSS object to the receiver through i2c. Please refer to the hardware GNSS module documentation for configuration details. +Firmware (FW) logging +--------------------- +The driver supports FW logging via the debugfs interface on PF 0 only. The FW +running on the NIC must support FW logging; if the FW doesn't support FW logging +the 'fwlog' file will not get created in the ice debugfs directory. + +Module configuration +~~~~~~~~~~~~~~~~~~~~ +Firmware logging is configured on a per module basis. Each module can be set to +a value independent of the other modules (unless the module 'all' is specified). +The modules will be instantiated under the 'fwlog/modules' directory. + +The user can set the log level for a module by writing to the module file like +this:: + + # echo <log_level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module> + +where + +* log_level is a name as described below. Each level includes the + messages from the previous/lower level + + * none + * error + * warning + * normal + * verbose + +* module is a name that represents the module to receive events for. The + module names are + + * general + * ctrl + * link + * link_topo + * dnl + * i2c + * sdp + * mdio + * adminq + * hdma + * lldp + * dcbx + * dcb + * xlr + * nvm + * auth + * vpd + * iosf + * parser + * sw + * scheduler + * txq + * rsvd + * post + * watchdog + * task_dispatch + * mng + * synce + * health + * tsdrv + * pfreg + * mdlver + * all + +The name 'all' is special and allows the user to set all of the modules to the +specified log_level or to read the log_level of all of the modules. + +Example usage to configure the modules +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +To set a single module to 'verbose':: + + # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link + +To set multiple modules then issue the command multiple times:: + + # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link + # echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/ctrl + # echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb + +To set all the modules to the same value:: + + # echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all + +To read the log_level of a specific module (e.g. module 'general'):: + + # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/general + +To read the log_level of all the modules:: + + # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all + +Enabling FW log +~~~~~~~~~~~~~~~ +Configuring the modules indicates to the FW that the configured modules should +generate events that the driver is interested in, but it **does not** send the +events to the driver until the enable message is sent to the FW. To do this +the user can write a 1 (enable) or 0 (disable) to 'fwlog/enable'. An example +is:: + + # echo 1 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable + +Retrieving FW log data +~~~~~~~~~~~~~~~~~~~~~~ +The FW log data can be retrieved by reading from 'fwlog/data'. The user can +write any value to 'fwlog/data' to clear the data. The data can only be cleared +when FW logging is disabled. The FW log data is a binary file that is sent to +Intel and used to help debug user issues. + +An example to read the data is:: + + # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data > fwlog.bin + +An example to clear the data is:: + + # echo 0 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data + +Changing how often the log events are sent to the driver +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver receives FW log data from the Admin Receive Queue (ARQ). The +frequency that the FW sends the ARQ events can be configured by writing to +'fwlog/nr_messages'. The range is 1-128 (1 means push every log message, 128 +means push only when the max AQ command buffer is full). The suggested value is +10. The user can see what the value is configured to by reading +'fwlog/nr_messages'. An example to set the value is:: + + # echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages + +Configuring the amount of memory used to store FW log data +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver stores FW log data within the driver. The default size of the memory +used to store the data is 1MB. Some use cases may require more or less data so +the user can change the amount of memory that is allocated for FW log data. +To change the amount of memory then write to 'fwlog/log_size'. The value must be +one of: 128K, 256K, 512K, 1M, or 2M. FW logging must be disabled to change the +value. An example of changing the value is:: + + # echo 128K > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size + + Performance Optimization ======================== Driver defaults are meant to fit a wide variety of workloads, but if further diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst index cad96c8d1f..c96d262b30 100644 --- a/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst +++ b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst @@ -22,8 +22,13 @@ EndPoint NIC. Supported Devices ================= Currently, this driver support following devices: + * Network controller: Cavium, Inc. Device b100 * Network controller: Cavium, Inc. Device b200 * Network controller: Cavium, Inc. Device b400 + * Network controller: Cavium, Inc. Device b900 + * Network controller: Cavium, Inc. Device ba00 + * Network controller: Cavium, Inc. Device bc00 + * Network controller: Cavium, Inc. Device bd00 Interface Control ================= diff --git a/Documentation/networking/device_drivers/wifi/index.rst b/Documentation/networking/device_drivers/wifi/index.rst index bf91a87c7a..fb394f5de4 100644 --- a/Documentation/networking/device_drivers/wifi/index.rst +++ b/Documentation/networking/device_drivers/wifi/index.rst @@ -10,7 +10,6 @@ Contents: intel/ipw2100 intel/ipw2200 - ray_cs .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/wifi/ray_cs.rst b/Documentation/networking/device_drivers/wifi/ray_cs.rst deleted file mode 100644 index 9a46d1ae8f..0000000000 --- a/Documentation/networking/device_drivers/wifi/ray_cs.rst +++ /dev/null @@ -1,165 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -.. include:: <isonum.txt> - -========================= -Raylink wireless LAN card -========================= - -September 21, 1999 - -Copyright |copy| 1998 Corey Thomas (corey@world.std.com) - -This file is the documentation for the Raylink Wireless LAN card driver for -Linux. The Raylink wireless LAN card is a PCMCIA card which provides IEEE -802.11 compatible wireless network connectivity at 1 and 2 megabits/second. -See http://www.raytheon.com/micro/raylink/ for more information on the Raylink -card. This driver is in early development and does have bugs. See the known -bugs and limitations at the end of this document for more information. -This driver also works with WebGear's Aviator 2.4 and Aviator Pro -wireless LAN cards. - -As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel -source. My web page for the development of ray_cs is at -http://web.ralinktech.com/ralink/Home/Support/Linux.html -and I can be emailed at corey@world.std.com - -The kernel driver is based on ray_cs-1.62.tgz - -The driver at my web page is intended to be used as an add on to -David Hinds pcmcia package. All the command line parameters are -available when compiled as a module. When built into the kernel, only -the essid= string parameter is available via the kernel command line. -This will change after the method of sorting out parameters for all -the PCMCIA drivers is agreed upon. If you must have a built in driver -with nondefault parameters, they can be edited in -/usr/src/linux/drivers/net/pcmcia/ray_cs.c. Searching for module_param -will find them all. - -Information on card services is available at: - - http://pcmcia-cs.sourceforge.net/ - - -Card services user programs are still required for PCMCIA devices. -pcmcia-cs-3.1.1 or greater is required for the kernel version of -the driver. - -Currently, ray_cs is not part of David Hinds card services package, -so the following magic is required. - -At the end of the /etc/pcmcia/config.opts file, add the line: -source ./ray_cs.opts -This will make card services read the ray_cs.opts file -when starting. Create the file /etc/pcmcia/ray_cs.opts containing the -following:: - - #### start of /etc/pcmcia/ray_cs.opts ################### - # Configuration options for Raylink Wireless LAN PCMCIA card - device "ray_cs" - class "network" module "misc/ray_cs" - - card "RayLink PC Card WLAN Adapter" - manfid 0x01a6, 0x0000 - bind "ray_cs" - - module "misc/ray_cs" opts "" - #### end of /etc/pcmcia/ray_cs.opts ##################### - - -To join an existing network with -different parameters, contact the network administrator for the -configuration information, and edit /etc/pcmcia/ray_cs.opts. -Add the parameters below between the empty quotes. - -Parameters for ray_cs driver which may be specified in ray_cs.opts: - -=============== =============== ============================================= -bc integer 0 = normal mode (802.11 timing), - 1 = slow down inter frame timing to allow - operation with older breezecom access - points. - -beacon_period integer beacon period in Kilo-microseconds, - - legal values = must be integer multiple - of hop dwell - - default = 256 - -country integer 1 = USA (default), - 2 = Europe, - 3 = Japan, - 4 = Korea, - 5 = Spain, - 6 = France, - 7 = Israel, - 8 = Australia - -essid string ESS ID - network name to join - - string with maximum length of 32 chars - default value = "ADHOC_ESSID" - -hop_dwell integer hop dwell time in Kilo-microseconds - - legal values = 16,32,64,128(default),256 - -irq_mask integer linux standard 16 bit value 1bit/IRQ - - lsb is IRQ 0, bit 1 is IRQ 1 etc. - Used to restrict choice of IRQ's to use. - Recommended method for controlling - interrupts is in /etc/pcmcia/config.opts - -net_type integer 0 (default) = adhoc network, - 1 = infrastructure - -phy_addr string string containing new MAC address in - hex, must start with x eg - x00008f123456 - -psm integer 0 = continuously active, - 1 = power save mode (not useful yet) - -pc_debug integer (0-5) larger values for more verbose - logging. Replaces ray_debug. - -ray_debug integer Replaced with pc_debug - -ray_mem_speed integer defaults to 500 - -sniffer integer 0 = not sniffer (default), - 1 = sniffer which can be used to record all - network traffic using tcpdump or similar, - but no normal network use is allowed. - -translate integer 0 = no translation (encapsulate frames), - 1 = translation (RFC1042/802.1) -=============== =============== ============================================= - -More on sniffer mode: - -tcpdump does not understand 802.11 headers, so it can't -interpret the contents, but it can record to a file. This is only -useful for debugging 802.11 lowlevel protocols that are not visible to -linux. If you want to watch ftp xfers, or do similar things, you -don't need to use sniffer mode. Also, some packet types are never -sent up by the card, so you will never see them (ack, rts, cts, probe -etc.) There is a simple program (showcap) included in the ray_cs -package which parses the 802.11 headers. - -Known Problems and missing features - - Does not work with non x86 - - Does not work with SMP - - Support for defragmenting frames is not yet debugged, and in - fact is known to not work. I have never encountered a net set - up to fragment, but still, it should be fixed. - - The ioctl support is incomplete. The hardware address cannot be set - using ifconfig yet. If a different hardware address is needed, it may - be set using the phy_addr parameter in ray_cs.opts. This requires - a card insertion to take effect. |