summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/netconsole.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/networking/netconsole.rst
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/networking/netconsole.rst')
-rw-r--r--Documentation/networking/netconsole.rst248
1 files changed, 248 insertions, 0 deletions
diff --git a/Documentation/networking/netconsole.rst b/Documentation/networking/netconsole.rst
new file mode 100644
index 0000000000..7a9de0568e
--- /dev/null
+++ b/Documentation/networking/netconsole.rst
@@ -0,0 +1,248 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Netconsole
+==========
+
+
+started by Ingo Molnar <mingo@redhat.com>, 2001.09.17
+
+2.6 port and netpoll api by Matt Mackall <mpm@selenic.com>, Sep 9 2003
+
+IPv6 support by Cong Wang <xiyou.wangcong@gmail.com>, Jan 1 2013
+
+Extended console support by Tejun Heo <tj@kernel.org>, May 1 2015
+
+Release prepend support by Breno Leitao <leitao@debian.org>, Jul 7 2023
+
+Please send bug reports to Matt Mackall <mpm@selenic.com>
+Satyam Sharma <satyam.sharma@gmail.com>, and Cong Wang <xiyou.wangcong@gmail.com>
+
+Introduction:
+=============
+
+This module logs kernel printk messages over UDP allowing debugging of
+problem where disk logging fails and serial consoles are impractical.
+
+It can be used either built-in or as a module. As a built-in,
+netconsole initializes immediately after NIC cards and will bring up
+the specified interface as soon as possible. While this doesn't allow
+capture of early kernel panics, it does capture most of the boot
+process.
+
+Sender and receiver configuration:
+==================================
+
+It takes a string configuration parameter "netconsole" in the
+following format::
+
+ netconsole=[+][r][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr]
+
+ where
+ + if present, enable extended console support
+ r if present, prepend kernel version (release) to the message
+ src-port source for UDP packets (defaults to 6665)
+ src-ip source IP to use (interface address)
+ dev network interface (eth0)
+ tgt-port port for logging agent (6666)
+ tgt-ip IP address for logging agent
+ tgt-macaddr ethernet MAC address for logging agent (broadcast)
+
+Examples::
+
+ linux netconsole=4444@10.0.0.1/eth1,9353@10.0.0.2/12:34:56:78:9a:bc
+
+or::
+
+ insmod netconsole netconsole=@/,@10.0.0.2/
+
+or using IPv6::
+
+ insmod netconsole netconsole=@/,@fd00:1:2:3::1/
+
+It also supports logging to multiple remote agents by specifying
+parameters for the multiple agents separated by semicolons and the
+complete string enclosed in "quotes", thusly::
+
+ modprobe netconsole netconsole="@/,@10.0.0.2/;@/eth1,6892@10.0.0.3/"
+
+Built-in netconsole starts immediately after the TCP stack is
+initialized and attempts to bring up the supplied dev at the supplied
+address.
+
+The remote host has several options to receive the kernel messages,
+for example:
+
+1) syslogd
+
+2) netcat
+
+ On distributions using a BSD-based netcat version (e.g. Fedora,
+ openSUSE and Ubuntu) the listening port must be specified without
+ the -p switch::
+
+ nc -u -l -p <port>' / 'nc -u -l <port>
+
+ or::
+
+ netcat -u -l -p <port>' / 'netcat -u -l <port>
+
+3) socat
+
+::
+
+ socat udp-recv:<port> -
+
+Dynamic reconfiguration:
+========================
+
+Dynamic reconfigurability is a useful addition to netconsole that enables
+remote logging targets to be dynamically added, removed, or have their
+parameters reconfigured at runtime from a configfs-based userspace interface.
+[ Note that the parameters of netconsole targets that were specified/created
+from the boot/module option are not exposed via this interface, and hence
+cannot be modified dynamically. ]
+
+To include this feature, select CONFIG_NETCONSOLE_DYNAMIC when building the
+netconsole module (or kernel, if netconsole is built-in).
+
+Some examples follow (where configfs is mounted at the /sys/kernel/config
+mountpoint).
+
+To add a remote logging target (target names can be arbitrary)::
+
+ cd /sys/kernel/config/netconsole/
+ mkdir target1
+
+Note that newly created targets have default parameter values (as mentioned
+above) and are disabled by default -- they must first be enabled by writing
+"1" to the "enabled" attribute (usually after setting parameters accordingly)
+as described below.
+
+To remove a target::
+
+ rmdir /sys/kernel/config/netconsole/othertarget/
+
+The interface exposes these parameters of a netconsole target to userspace:
+
+ ============== ================================= ============
+ enabled Is this target currently enabled? (read-write)
+ extended Extended mode enabled (read-write)
+ release Prepend kernel release to message (read-write)
+ dev_name Local network interface name (read-write)
+ local_port Source UDP port to use (read-write)
+ remote_port Remote agent's UDP port (read-write)
+ local_ip Source IP address to use (read-write)
+ remote_ip Remote agent's IP address (read-write)
+ local_mac Local interface's MAC address (read-only)
+ remote_mac Remote agent's MAC address (read-write)
+ ============== ================================= ============
+
+The "enabled" attribute is also used to control whether the parameters of
+a target can be updated or not -- you can modify the parameters of only
+disabled targets (i.e. if "enabled" is 0).
+
+To update a target's parameters::
+
+ cat enabled # check if enabled is 1
+ echo 0 > enabled # disable the target (if required)
+ echo eth2 > dev_name # set local interface
+ echo 10.0.0.4 > remote_ip # update some parameter
+ echo cb:a9:87:65:43:21 > remote_mac # update more parameters
+ echo 1 > enabled # enable target again
+
+You can also update the local interface dynamically. This is especially
+useful if you want to use interfaces that have newly come up (and may not
+have existed when netconsole was loaded / initialized).
+
+Extended console:
+=================
+
+If '+' is prefixed to the configuration line or "extended" config file
+is set to 1, extended console support is enabled. An example boot
+param follows::
+
+ linux netconsole=+4444@10.0.0.1/eth1,9353@10.0.0.2/12:34:56:78:9a:bc
+
+Log messages are transmitted with extended metadata header in the
+following format which is the same as /dev/kmsg::
+
+ <level>,<sequnum>,<timestamp>,<contflag>;<message text>
+
+If 'r' (release) feature is enabled, the kernel release version is
+prepended to the start of the message. Example::
+
+ 6.4.0,6,444,501151268,-;netconsole: network logging started
+
+Non printable characters in <message text> are escaped using "\xff"
+notation. If the message contains optional dictionary, verbatim
+newline is used as the delimiter.
+
+If a message doesn't fit in certain number of bytes (currently 1000),
+the message is split into multiple fragments by netconsole. These
+fragments are transmitted with "ncfrag" header field added::
+
+ ncfrag=<byte-offset>/<total-bytes>
+
+For example, assuming a lot smaller chunk size, a message "the first
+chunk, the 2nd chunk." may be split as follows::
+
+ 6,416,1758426,-,ncfrag=0/31;the first chunk,
+ 6,416,1758426,-,ncfrag=16/31; the 2nd chunk.
+
+Miscellaneous notes:
+====================
+
+.. Warning::
+
+ the default target ethernet setting uses the broadcast
+ ethernet address to send packets, which can cause increased load on
+ other systems on the same ethernet segment.
+
+.. Tip::
+
+ some LAN switches may be configured to suppress ethernet broadcasts
+ so it is advised to explicitly specify the remote agents' MAC addresses
+ from the config parameters passed to netconsole.
+
+.. Tip::
+
+ to find out the MAC address of, say, 10.0.0.2, you may try using::
+
+ ping -c 1 10.0.0.2 ; /sbin/arp -n | grep 10.0.0.2
+
+.. Tip::
+
+ in case the remote logging agent is on a separate LAN subnet than
+ the sender, it is suggested to try specifying the MAC address of the
+ default gateway (you may use /sbin/route -n to find it out) as the
+ remote MAC address instead.
+
+.. note::
+
+ the network device (eth1 in the above case) can run any kind
+ of other network traffic, netconsole is not intrusive. Netconsole
+ might cause slight delays in other traffic if the volume of kernel
+ messages is high, but should have no other impact.
+
+.. note::
+
+ if you find that the remote logging agent is not receiving or
+ printing all messages from the sender, it is likely that you have set
+ the "console_loglevel" parameter (on the sender) to only send high
+ priority messages to the console. You can change this at runtime using::
+
+ dmesg -n 8
+
+ or by specifying "debug" on the kernel command line at boot, to send
+ all kernel messages to the console. A specific value for this parameter
+ can also be set using the "loglevel" kernel boot option. See the
+ dmesg(8) man page and Documentation/admin-guide/kernel-parameters.rst
+ for details.
+
+Netconsole was designed to be as instantaneous as possible, to
+enable the logging of even the most critical kernel bugs. It works
+from IRQ contexts as well, and does not enable interrupts while
+sending packets. Due to these unique needs, configuration cannot
+be more automatic, and some fundamental limitations will remain:
+only IP networks, UDP packets and ethernet devices are supported.