Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 77 insertions, 0 deletions

diff --git a/Documentation/nvme/feature-and-quirk-policy.rst b/Documentation/nvme/feature-and-quirk-policy.rst
new file mode 100644
index 0000000000..c01d836d8e
--- /dev/null
+++ b/Documentation/nvme/feature-and-quirk-policy.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================================
+Linux NVMe feature and and quirk policy
+=======================================
+
+This file explains the policy used to decide what is supported by the
+Linux NVMe driver and what is not.
+
+
+Introduction
+============
+
+NVM Express is an open collection of standards and information.
+
+The Linux NVMe host driver in drivers/nvme/host/ supports devices
+implementing the NVM Express (NVMe) family of specifications, which
+currently consists of a number of documents:
+
+ - the NVMe Base specification
+ - various Command Set specifications (e.g. NVM Command Set)
+ - various Transport specifications (e.g. PCIe, Fibre Channel, RDMA, TCP)
+ - the NVMe Management Interface specification
+
+See https://nvmexpress.org/developers/ for the NVMe specifications.
+
+
+Supported features
+==================
+
+NVMe is a large suite of specifications, and contains features that are only
+useful or suitable for specific use-cases. It is important to note that Linux
+does not aim to implement every feature in the specification.  Every additional
+feature implemented introduces more code, more maintenance and potentially more
+bugs.  Hence there is an inherent tradeoff between functionality and
+maintainability of the NVMe host driver.
+
+Any feature implemented in the Linux NVMe host driver must support the
+following requirements:
+
+  1. The feature is specified in a release version of an official NVMe
+     specification, or in a ratified Technical Proposal (TP) that is
+     available on NVMe website. Or if it is not directly related to the
+     on-wire protocol, does not contradict any of the NVMe specifications.
+  2. Does not conflict with the Linux architecture, nor the design of the
+     NVMe host driver.
+  3. Has a clear, indisputable value-proposition and a wide consensus across
+     the community.
+
+Vendor specific extensions are generally not supported in the NVMe host
+driver.
+
+It is strongly recommended to work with the Linux NVMe and block layer
+maintainers and get feedback on specification changes that are intended
+to be used by the Linux NVMe host driver in order to avoid conflict at a
+later stage.
+
+
+Quirks
+======
+
+Sometimes implementations of open standards fail to correctly implement parts
+of the standards.  Linux uses identifier-based quirks to work around such
+implementation bugs.  The intent of quirks is to deal with widely available
+hardware, usually consumer, which Linux users can't use without these quirks.
+Typically these implementations are not or only superficially tested with Linux
+by the hardware manufacturer.
+
+The Linux NVMe maintainers decide ad hoc whether to quirk implementations
+based on the impact of the problem to Linux users and how it impacts
+maintainability of the driver.  In general quirks are a last resort, if no
+firmware updates or other workarounds are available from the vendor.
+
+Quirks will not be added to the Linux kernel for hardware that isn't available
+on the mass market.  Hardware that fails qualification for enterprise Linux
+distributions, ChromeOS, Android or other consumers of the Linux kernel
+should be fixed before it is shipped instead of relying on Linux quirks.