summaryrefslogtreecommitdiffstats
path: root/Documentation/scsi/arcmsr_spec.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/scsi/arcmsr_spec.rst
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/scsi/arcmsr_spec.rst')
-rw-r--r--Documentation/scsi/arcmsr_spec.rst908
1 files changed, 908 insertions, 0 deletions
diff --git a/Documentation/scsi/arcmsr_spec.rst b/Documentation/scsi/arcmsr_spec.rst
new file mode 100644
index 0000000000..792c731b65
--- /dev/null
+++ b/Documentation/scsi/arcmsr_spec.rst
@@ -0,0 +1,908 @@
+===================
+ARECA FIRMWARE SPEC
+===================
+
+Usage of IOP331 adapter
+=======================
+
+(All In/Out is in IOP331's view)
+
+1. Message 0
+------------
+
+- InitThread message and return code
+
+2. Doorbell is used for RS-232 emulation
+----------------------------------------
+
+inDoorBell
+ bit0
+ data in ready
+ zDRIVER DATA WRITE OK)
+ bit1
+ data out has been read
+ (DRIVER DATA READ OK)
+
+outDooeBell:
+ bit0
+ data out ready
+ (IOP331 DATA WRITE OK)
+ bit1
+ data in has been read
+ (IOP331 DATA READ OK)
+
+3. Index Memory Usage
+---------------------
+
+============ ==========================================
+offset 0xf00 for RS232 out (request buffer)
+offset 0xe00 for RS232 in (scratch buffer)
+offset 0xa00 for inbound message code message_rwbuffer
+ (driver send to IOP331)
+offset 0xa00 for outbound message code message_rwbuffer
+ (IOP331 send to driver)
+============ ==========================================
+
+4. RS-232 emulation
+-------------------
+
+Currently 128 byte buffer is used:
+
+============ =====================
+1st uint32_t Data length (1--124)
+Byte 4--127 Max 124 bytes of data
+============ =====================
+
+5. PostQ
+--------
+
+All SCSI Command must be sent through postQ:
+
+ (inbound queue port)
+ Request frame must be 32 bytes aligned:
+
+ #bit27--bit31
+ flag for post ccb
+ #bit0--bit26
+ real address (bit27--bit31) of post arcmsr_cdb
+
+ ===== ===================
+ bit31 == ===============
+ 0 256 bytes frame
+ 1 512 bytes frame
+ == ===============
+ bit30 == ==============
+ 0 normal request
+ 1 BIOS request
+ == ==============
+ bit29 reserved
+ bit28 reserved
+ bit27 reserved
+ ===== ===================
+
+ (outbount queue port)
+ Request reply:
+
+ #bit27--bit31
+ flag for reply
+ #bit0--bit26
+ real address (bit27--bit31) of reply arcmsr_cdb
+
+ ===== =======================================================
+ bit31 must be 0 (for this type of reply)
+ bit30 reserved for BIOS handshake
+ bit29 reserved
+ bit28 == ===================================================
+ 0 no error, ignore AdapStatus/DevStatus/SenseData
+ 1 Error, error code in AdapStatus/DevStatus/SenseData
+ == ===================================================
+ bit27 reserved
+ ===== =======================================================
+
+6. BIOS request
+---------------
+
+All BIOS request is the same with request from PostQ
+
+Except:
+
+Request frame is sent from configuration space:
+
+ ============ ==========================
+ offset: 0x78 Request Frame (bit30 == 1)
+ offset: 0x18 writeonly to generate
+ IRQ to IOP331
+ ============ ==========================
+
+Completion of request::
+
+ (bit30 == 0, bit28==err flag)
+
+7. Definition of SGL entry (structure)
+--------------------------------------
+
+8. Message1 Out - Diag Status Code (????)
+-----------------------------------------
+
+9. Message0 message code
+------------------------
+
+====== =================================================================
+0x00 NOP
+0x01 Get Config
+ ->offset 0xa00 :for outbound message code message_rwbuffer
+ (IOP331 send to driver)
+
+ ===================== ==========================================
+ Signature 0x87974060(4)
+ Request len 0x00000200(4)
+ numbers of queue 0x00000100(4)
+ SDRAM Size 0x00000100(4)-->256 MB
+ IDE Channels 0x00000008(4)
+ vendor 40 bytes char
+ model 8 bytes char
+ FirmVer 16 bytes char
+ Device Map 16 bytes char
+ FirmwareVersion DWORD
+
+ - Added for checking of
+ new firmware capability
+ ===================== ==========================================
+0x02 Set Config
+ ->offset 0xa00 :for inbound message code message_rwbuffer
+ (driver send to IOP331)
+
+ ========================= ==================
+ Signature 0x87974063(4)
+ UPPER32 of Request Frame (4)-->Driver Only
+ ========================= ==================
+0x03 Reset (Abort all queued Command)
+0x04 Stop Background Activity
+0x05 Flush Cache
+0x06 Start Background Activity
+ (re-start if background is halted)
+0x07 Check If Host Command Pending
+ (Novell May Need This Function)
+0x08 Set controller time
+ ->offset 0xa00 for inbound message code message_rwbuffer
+ (driver to IOP331)
+
+ ====== ==================
+ byte 0 0xaa <-- signature
+ byte 1 0x55 <-- signature
+ byte 2 year (04)
+ byte 3 month (1..12)
+ byte 4 date (1..31)
+ byte 5 hour (0..23)
+ byte 6 minute (0..59)
+ byte 7 second (0..59)
+ ====== ==================
+====== =================================================================
+
+
+RS-232 Interface for Areca Raid Controller
+==========================================
+
+ The low level command interface is exclusive with VT100 terminal
+
+1. Sequence of command execution
+--------------------------------
+
+ (A) Header
+ 3 bytes sequence (0x5E, 0x01, 0x61)
+
+ (B) Command block
+ variable length of data including length,
+ command code, data and checksum byte
+
+ (C) Return data
+ variable length of data
+
+2. Command block
+----------------
+
+ (A) 1st byte
+ command block length (low byte)
+
+ (B) 2nd byte
+ command block length (high byte)
+
+ .. Note:: command block length shouldn't > 2040 bytes,
+ length excludes these two bytes
+
+ (C) 3rd byte
+ command code
+
+ (D) 4th and following bytes
+ variable length data bytes
+
+ depends on command code
+
+ (E) last byte
+ checksum byte (sum of 1st byte until last data byte)
+
+3. Command code and associated data
+-----------------------------------
+
+The following are command code defined in raid controller Command
+code 0x10--0x1? are used for system level management,
+no password checking is needed and should be implemented in separate
+well controlled utility and not for end user access.
+Command code 0x20--0x?? always check the password,
+password must be entered to enable these command::
+
+ enum
+ {
+ GUI_SET_SERIAL=0x10,
+ GUI_SET_VENDOR,
+ GUI_SET_MODEL,
+ GUI_IDENTIFY,
+ GUI_CHECK_PASSWORD,
+ GUI_LOGOUT,
+ GUI_HTTP,
+ GUI_SET_ETHERNET_ADDR,
+ GUI_SET_LOGO,
+ GUI_POLL_EVENT,
+ GUI_GET_EVENT,
+ GUI_GET_HW_MONITOR,
+ // GUI_QUICK_CREATE=0x20, (function removed)
+ GUI_GET_INFO_R=0x20,
+ GUI_GET_INFO_V,
+ GUI_GET_INFO_P,
+ GUI_GET_INFO_S,
+ GUI_CLEAR_EVENT,
+ GUI_MUTE_BEEPER=0x30,
+ GUI_BEEPER_SETTING,
+ GUI_SET_PASSWORD,
+ GUI_HOST_INTERFACE_MODE,
+ GUI_REBUILD_PRIORITY,
+ GUI_MAX_ATA_MODE,
+ GUI_RESET_CONTROLLER,
+ GUI_COM_PORT_SETTING,
+ GUI_NO_OPERATION,
+ GUI_DHCP_IP,
+ GUI_CREATE_PASS_THROUGH=0x40,
+ GUI_MODIFY_PASS_THROUGH,
+ GUI_DELETE_PASS_THROUGH,
+ GUI_IDENTIFY_DEVICE,
+ GUI_CREATE_RAIDSET=0x50,
+ GUI_DELETE_RAIDSET,
+ GUI_EXPAND_RAIDSET,
+ GUI_ACTIVATE_RAIDSET,
+ GUI_CREATE_HOT_SPARE,
+ GUI_DELETE_HOT_SPARE,
+ GUI_CREATE_VOLUME=0x60,
+ GUI_MODIFY_VOLUME,
+ GUI_DELETE_VOLUME,
+ GUI_START_CHECK_VOLUME,
+ GUI_STOP_CHECK_VOLUME
+ };
+
+Command description
+^^^^^^^^^^^^^^^^^^^
+
+GUI_SET_SERIAL
+ Set the controller serial#
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x10
+ byte 3 password length (should be 0x0f)
+ byte 4-0x13 should be "ArEcATecHnoLogY"
+ byte 0x14--0x23 Serial number string (must be 16 bytes)
+ ================ =============================================
+
+GUI_SET_VENDOR
+ Set vendor string for the controller
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x11
+ byte 3 password length (should be 0x08)
+ byte 4-0x13 should be "ArEcAvAr"
+ byte 0x14--0x3B vendor string (must be 40 bytes)
+ ================ =============================================
+
+GUI_SET_MODEL
+ Set the model name of the controller
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x12
+ byte 3 password length (should be 0x08)
+ byte 4-0x13 should be "ArEcAvAr"
+ byte 0x14--0x1B model string (must be 8 bytes)
+ ================ =============================================
+
+GUI_IDENTIFY
+ Identify device
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x13
+ return "Areca RAID Subsystem "
+ ================ =============================================
+
+GUI_CHECK_PASSWORD
+ Verify password
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x14
+ byte 3 password length
+ byte 4-0x?? user password to be checked
+ ================ =============================================
+
+GUI_LOGOUT
+ Logout GUI (force password checking on next command)
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x15
+ ================ =============================================
+
+GUI_HTTP
+ HTTP interface (reserved for Http proxy service)(0x16)
+
+GUI_SET_ETHERNET_ADDR
+ Set the ethernet MAC address
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x17
+ byte 3 password length (should be 0x08)
+ byte 4-0x13 should be "ArEcAvAr"
+ byte 0x14--0x19 Ethernet MAC address (must be 6 bytes)
+ ================ =============================================
+
+GUI_SET_LOGO
+ Set logo in HTTP
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x18
+ byte 3 Page# (0/1/2/3) (0xff --> clear OEM logo)
+ byte 4/5/6/7 0x55/0xaa/0xa5/0x5a
+ byte 8 TITLE.JPG data (each page must be 2000 bytes)
+
+ .. Note:: page0 1st 2 byte must be
+ actual length of the JPG file
+ ================ =============================================
+
+GUI_POLL_EVENT
+ Poll If Event Log Changed
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x19
+ ================ =============================================
+
+GUI_GET_EVENT
+ Read Event
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x1a
+ byte 3 Event Page (0:1st page/1/2/3:last page)
+ ================ =============================================
+
+GUI_GET_HW_MONITOR
+ Get HW monitor data
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x1b
+ byte 3 # of FANs(example 2)
+ byte 4 # of Voltage sensor(example 3)
+ byte 5 # of temperature sensor(example 2)
+ byte 6 # of power
+ byte 7/8 Fan#0 (RPM)
+ byte 9/10 Fan#1
+ byte 11/12 Voltage#0 original value in ``*1000``
+ byte 13/14 Voltage#0 value
+ byte 15/16 Voltage#1 org
+ byte 17/18 Voltage#1
+ byte 19/20 Voltage#2 org
+ byte 21/22 Voltage#2
+ byte 23 Temp#0
+ byte 24 Temp#1
+ byte 25 Power indicator (bit0 power#0,
+ bit1 power#1)
+ byte 26 UPS indicator
+ ================ =============================================
+
+GUI_QUICK_CREATE
+ Quick create raid/volume set
+
+ ================ ==============================================
+ byte 0,1 length
+ byte 2 command code 0x20
+ byte 3/4/5/6 raw capacity
+ byte 7 raid level
+ byte 8 stripe size
+ byte 9 spare
+ byte 10/11/12/13 device mask (the devices to create raid/volume)
+ ================ ==============================================
+
+ This function is removed, application like
+ to implement quick create function
+
+ need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function.
+
+GUI_GET_INFO_R
+ Get Raid Set Information
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x20
+ byte 3 raidset#
+ ================ =============================================
+
+ ::
+
+ typedef struct sGUI_RAIDSET
+ {
+ BYTE grsRaidSetName[16];
+ DWORD grsCapacity;
+ DWORD grsCapacityX;
+ DWORD grsFailMask;
+ BYTE grsDevArray[32];
+ BYTE grsMemberDevices;
+ BYTE grsNewMemberDevices;
+ BYTE grsRaidState;
+ BYTE grsVolumes;
+ BYTE grsVolumeList[16];
+ BYTE grsRes1;
+ BYTE grsRes2;
+ BYTE grsRes3;
+ BYTE grsFreeSegments;
+ DWORD grsRawStripes[8];
+ DWORD grsRes4;
+ DWORD grsRes5; // Total to 128 bytes
+ DWORD grsRes6; // Total to 128 bytes
+ } sGUI_RAIDSET, *pGUI_RAIDSET;
+
+GUI_GET_INFO_V
+ Get Volume Set Information
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x21
+ byte 3 volumeset#
+ ================ =============================================
+
+ ::
+
+ typedef struct sGUI_VOLUMESET
+ {
+ BYTE gvsVolumeName[16]; // 16
+ DWORD gvsCapacity;
+ DWORD gvsCapacityX;
+ DWORD gvsFailMask;
+ DWORD gvsStripeSize;
+ DWORD gvsNewFailMask;
+ DWORD gvsNewStripeSize;
+ DWORD gvsVolumeStatus;
+ DWORD gvsProgress; // 32
+ sSCSI_ATTR gvsScsi;
+ BYTE gvsMemberDisks;
+ BYTE gvsRaidLevel; // 8
+ BYTE gvsNewMemberDisks;
+ BYTE gvsNewRaidLevel;
+ BYTE gvsRaidSetNumber;
+ BYTE gvsRes0; // 4
+ BYTE gvsRes1[4]; // 64 bytes
+ } sGUI_VOLUMESET, *pGUI_VOLUMESET;
+
+GUI_GET_INFO_P
+ Get Physical Drive Information
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x22
+ byte 3 drive # (from 0 to max-channels - 1)
+ ================ =============================================
+
+ ::
+
+ typedef struct sGUI_PHY_DRV
+ {
+ BYTE gpdModelName[40];
+ BYTE gpdSerialNumber[20];
+ BYTE gpdFirmRev[8];
+ DWORD gpdCapacity;
+ DWORD gpdCapacityX; // Reserved for expansion
+ BYTE gpdDeviceState;
+ BYTE gpdPioMode;
+ BYTE gpdCurrentUdmaMode;
+ BYTE gpdUdmaMode;
+ BYTE gpdDriveSelect;
+ BYTE gpdRaidNumber; // 0xff if not belongs to a raid set
+ sSCSI_ATTR gpdScsi;
+ BYTE gpdReserved[40]; // Total to 128 bytes
+ } sGUI_PHY_DRV, *pGUI_PHY_DRV;
+
+GUI_GET_INFO_S
+ Get System Information
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x23
+ ================ =============================================
+
+ ::
+
+ typedef struct sCOM_ATTR
+ {
+ BYTE comBaudRate;
+ BYTE comDataBits;
+ BYTE comStopBits;
+ BYTE comParity;
+ BYTE comFlowControl;
+ } sCOM_ATTR, *pCOM_ATTR;
+ typedef struct sSYSTEM_INFO
+ {
+ BYTE gsiVendorName[40];
+ BYTE gsiSerialNumber[16];
+ BYTE gsiFirmVersion[16];
+ BYTE gsiBootVersion[16];
+ BYTE gsiMbVersion[16];
+ BYTE gsiModelName[8];
+ BYTE gsiLocalIp[4];
+ BYTE gsiCurrentIp[4];
+ DWORD gsiTimeTick;
+ DWORD gsiCpuSpeed;
+ DWORD gsiICache;
+ DWORD gsiDCache;
+ DWORD gsiScache;
+ DWORD gsiMemorySize;
+ DWORD gsiMemorySpeed;
+ DWORD gsiEvents;
+ BYTE gsiMacAddress[6];
+ BYTE gsiDhcp;
+ BYTE gsiBeeper;
+ BYTE gsiChannelUsage;
+ BYTE gsiMaxAtaMode;
+ BYTE gsiSdramEcc; // 1:if ECC enabled
+ BYTE gsiRebuildPriority;
+ sCOM_ATTR gsiComA; // 5 bytes
+ sCOM_ATTR gsiComB; // 5 bytes
+ BYTE gsiIdeChannels;
+ BYTE gsiScsiHostChannels;
+ BYTE gsiIdeHostChannels;
+ BYTE gsiMaxVolumeSet;
+ BYTE gsiMaxRaidSet;
+ BYTE gsiEtherPort; // 1:if ether net port supported
+ BYTE gsiRaid6Engine; // 1:Raid6 engine supported
+ BYTE gsiRes[75];
+ } sSYSTEM_INFO, *pSYSTEM_INFO;
+
+GUI_CLEAR_EVENT
+ Clear System Event
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x24
+ ================ =============================================
+
+GUI_MUTE_BEEPER
+ Mute current beeper
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x30
+ ================ =============================================
+GUI_BEEPER_SETTING
+ Disable beeper
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x31
+ byte 3 0->disable, 1->enable
+ ================ =============================================
+
+GUI_SET_PASSWORD
+ Change password
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x32
+ byte 3 pass word length ( must <= 15 )
+ byte 4 password (must be alpha-numerical)
+ ================ =============================================
+
+GUI_HOST_INTERFACE_MODE
+ Set host interface mode
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x33
+ byte 3 0->Independent, 1->cluster
+ ================ =============================================
+
+GUI_REBUILD_PRIORITY
+ Set rebuild priority
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x34
+ byte 3 0/1/2/3 (low->high)
+ ================ =============================================
+
+GUI_MAX_ATA_MODE
+ Set maximum ATA mode to be used
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x35
+ byte 3 0/1/2/3 (133/100/66/33)
+ ================ =============================================
+
+GUI_RESET_CONTROLLER
+ Reset Controller
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x36
+ * Response with VT100 screen (discard it)
+ ================ =============================================
+
+GUI_COM_PORT_SETTING
+ COM port setting
+
+ ================ =================================================
+ byte 0,1 length
+ byte 2 command code 0x37
+ byte 3 0->COMA (term port),
+ 1->COMB (debug port)
+ byte 4 0/1/2/3/4/5/6/7
+ (1200/2400/4800/9600/19200/38400/57600/115200)
+ byte 5 data bit
+ (0:7 bit, 1:8 bit must be 8 bit)
+ byte 6 stop bit (0:1, 1:2 stop bits)
+ byte 7 parity (0:none, 1:off, 2:even)
+ byte 8 flow control
+ (0:none, 1:xon/xoff, 2:hardware => must use none)
+ ================ =================================================
+
+GUI_NO_OPERATION
+ No operation
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x38
+ ================ =============================================
+
+GUI_DHCP_IP
+ Set DHCP option and local IP address
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x39
+ byte 3 0:dhcp disabled, 1:dhcp enabled
+ byte 4/5/6/7 IP address
+ ================ =============================================
+
+GUI_CREATE_PASS_THROUGH
+ Create pass through disk
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x40
+ byte 3 device #
+ byte 4 scsi channel (0/1)
+ byte 5 scsi id (0-->15)
+ byte 6 scsi lun (0-->7)
+ byte 7 tagged queue (1 enabled)
+ byte 8 cache mode (1 enabled)
+ byte 9 max speed (0/1/2/3/4,
+ async/20/40/80/160 for scsi)
+ (0/1/2/3/4, 33/66/100/133/150 for ide )
+ ================ =============================================
+
+GUI_MODIFY_PASS_THROUGH
+ Modify pass through disk
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x41
+ byte 3 device #
+ byte 4 scsi channel (0/1)
+ byte 5 scsi id (0-->15)
+ byte 6 scsi lun (0-->7)
+ byte 7 tagged queue (1 enabled)
+ byte 8 cache mode (1 enabled)
+ byte 9 max speed (0/1/2/3/4,
+ async/20/40/80/160 for scsi)
+ (0/1/2/3/4, 33/66/100/133/150 for ide )
+ ================ =============================================
+
+GUI_DELETE_PASS_THROUGH
+ Delete pass through disk
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x42
+ byte 3 device# to be deleted
+ ================ =============================================
+GUI_IDENTIFY_DEVICE
+ Identify Device
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x43
+ byte 3 Flash Method
+ (0:flash selected, 1:flash not selected)
+ byte 4/5/6/7 IDE device mask to be flashed
+ .. Note:: no response data available
+ ================ =============================================
+
+GUI_CREATE_RAIDSET
+ Create Raid Set
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x50
+ byte 3/4/5/6 device mask
+ byte 7-22 raidset name (if byte 7 == 0:use default)
+ ================ =============================================
+
+GUI_DELETE_RAIDSET
+ Delete Raid Set
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x51
+ byte 3 raidset#
+ ================ =============================================
+
+GUI_EXPAND_RAIDSET
+ Expand Raid Set
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x52
+ byte 3 raidset#
+ byte 4/5/6/7 device mask for expansion
+ byte 8/9/10 (8:0 no change, 1 change, 0xff:terminate,
+ 9:new raid level,
+ 10:new stripe size
+ 0/1/2/3/4/5->4/8/16/32/64/128K )
+ byte 11/12/13 repeat for each volume in the raidset
+ ================ =============================================
+
+GUI_ACTIVATE_RAIDSET
+ Activate incomplete raid set
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x53
+ byte 3 raidset#
+ ================ =============================================
+
+GUI_CREATE_HOT_SPARE
+ Create hot spare disk
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x54
+ byte 3/4/5/6 device mask for hot spare creation
+ ================ =============================================
+
+GUI_DELETE_HOT_SPARE
+ Delete hot spare disk
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x55
+ byte 3/4/5/6 device mask for hot spare deletion
+ ================ =============================================
+
+GUI_CREATE_VOLUME
+ Create volume set
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x60
+ byte 3 raidset#
+ byte 4-19 volume set name
+ (if byte4 == 0, use default)
+ byte 20-27 volume capacity (blocks)
+ byte 28 raid level
+ byte 29 stripe size
+ (0/1/2/3/4/5->4/8/16/32/64/128K)
+ byte 30 channel
+ byte 31 ID
+ byte 32 LUN
+ byte 33 1 enable tag
+ byte 34 1 enable cache
+ byte 35 speed
+ (0/1/2/3/4->async/20/40/80/160 for scsi)
+ (0/1/2/3/4->33/66/100/133/150 for IDE )
+ byte 36 1 to select quick init
+ ================ =============================================
+
+GUI_MODIFY_VOLUME
+ Modify volume Set
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x61
+ byte 3 volumeset#
+ byte 4-19 new volume set name
+ (if byte4 == 0, not change)
+ byte 20-27 new volume capacity (reserved)
+ byte 28 new raid level
+ byte 29 new stripe size
+ (0/1/2/3/4/5->4/8/16/32/64/128K)
+ byte 30 new channel
+ byte 31 new ID
+ byte 32 new LUN
+ byte 33 1 enable tag
+ byte 34 1 enable cache
+ byte 35 speed
+ (0/1/2/3/4->async/20/40/80/160 for scsi)
+ (0/1/2/3/4->33/66/100/133/150 for IDE )
+ ================ =============================================
+
+GUI_DELETE_VOLUME
+ Delete volume set
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x62
+ byte 3 volumeset#
+ ================ =============================================
+
+GUI_START_CHECK_VOLUME
+ Start volume consistency check
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x63
+ byte 3 volumeset#
+ ================ =============================================
+
+GUI_STOP_CHECK_VOLUME
+ Stop volume consistency check
+
+ ================ =============================================
+ byte 0,1 length
+ byte 2 command code 0x64
+ ================ =============================================
+
+4. Returned data
+----------------
+
+(A) Header
+ 3 bytes sequence (0x5E, 0x01, 0x61)
+(B) Length
+ 2 bytes
+ (low byte 1st, excludes length and checksum byte)
+(C)
+ status or data:
+
+ 1) If length == 1 ==> 1 byte status code::
+
+ #define GUI_OK 0x41
+ #define GUI_RAIDSET_NOT_NORMAL 0x42
+ #define GUI_VOLUMESET_NOT_NORMAL 0x43
+ #define GUI_NO_RAIDSET 0x44
+ #define GUI_NO_VOLUMESET 0x45
+ #define GUI_NO_PHYSICAL_DRIVE 0x46
+ #define GUI_PARAMETER_ERROR 0x47
+ #define GUI_UNSUPPORTED_COMMAND 0x48
+ #define GUI_DISK_CONFIG_CHANGED 0x49
+ #define GUI_INVALID_PASSWORD 0x4a
+ #define GUI_NO_DISK_SPACE 0x4b
+ #define GUI_CHECKSUM_ERROR 0x4c
+ #define GUI_PASSWORD_REQUIRED 0x4d
+
+ 2) If length > 1:
+
+ data block returned from controller
+ and the contents depends on the command code
+
+(E) Checksum
+ checksum of length and status or data byte
+