Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 729 insertions, 0 deletions

diff --git a/Documentation/userspace-api/media/v4l/dev-encoder.rst b/Documentation/userspace-api/media/v4l/dev-encoder.rst
new file mode 100644
index 0000000000..6c523c69bd
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/dev-encoder.rst
@@ -0,0 +1,729 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
+
+.. _encoder:
+
+*************************************************
+Memory-to-Memory Stateful Video Encoder Interface
+*************************************************
+
+A stateful video encoder takes raw video frames in display order and encodes
+them into a bytestream. It generates complete chunks of the bytestream, including
+all metadata, headers, etc. The resulting bytestream does not require any
+further post-processing by the client.
+
+Performing software stream processing, header generation etc. in the driver
+in order to support this interface is strongly discouraged. In case such
+operations are needed, use of the Stateless Video Encoder Interface (in
+development) is strongly advised.
+
+Conventions and Notations Used in This Document
+===============================================
+
+1. The general V4L2 API rules apply if not specified in this document
+   otherwise.
+
+2. The meaning of words "must", "may", "should", etc. is as per `RFC
+   2119 <https://tools.ietf.org/html/rfc2119>`_.
+
+3. All steps not marked "optional" are required.
+
+4. :c:func:`VIDIOC_G_EXT_CTRLS` and :c:func:`VIDIOC_S_EXT_CTRLS` may be used
+   interchangeably with :c:func:`VIDIOC_G_CTRL` and :c:func:`VIDIOC_S_CTRL`,
+   unless specified otherwise.
+
+5. Single-planar API (see :ref:`planar-apis`) and applicable structures may be
+   used interchangeably with multi-planar API, unless specified otherwise,
+   depending on encoder capabilities and following the general V4L2 guidelines.
+
+6. i = [a..b]: sequence of integers from a to b, inclusive, i.e. i =
+   [0..2]: i = 0, 1, 2.
+
+7. Given an ``OUTPUT`` buffer A, then A' represents a buffer on the ``CAPTURE``
+   queue containing data that resulted from processing buffer A.
+
+Glossary
+========
+
+Refer to :ref:`decoder-glossary`.
+
+State Machine
+=============
+
+.. kernel-render:: DOT
+   :alt: DOT digraph of encoder state machine
+   :caption: Encoder State Machine
+
+   digraph encoder_state_machine {
+       node [shape = doublecircle, label="Encoding"] Encoding;
+
+       node [shape = circle, label="Initialization"] Initialization;
+       node [shape = circle, label="Stopped"] Stopped;
+       node [shape = circle, label="Drain"] Drain;
+       node [shape = circle, label="Reset"] Reset;
+
+       node [shape = point]; qi
+       qi -> Initialization [ label = "open()" ];
+
+       Initialization -> Encoding [ label = "Both queues streaming" ];
+
+       Encoding -> Drain [ label = "V4L2_ENC_CMD_STOP" ];
+       Encoding -> Reset [ label = "VIDIOC_STREAMOFF(CAPTURE)" ];
+       Encoding -> Stopped [ label = "VIDIOC_STREAMOFF(OUTPUT)" ];
+       Encoding -> Encoding;
+
+       Drain -> Stopped [ label = "All CAPTURE\nbuffers dequeued\nor\nVIDIOC_STREAMOFF(OUTPUT)" ];
+       Drain -> Reset [ label = "VIDIOC_STREAMOFF(CAPTURE)" ];
+
+       Reset -> Encoding [ label = "VIDIOC_STREAMON(CAPTURE)" ];
+       Reset -> Initialization [ label = "VIDIOC_REQBUFS(OUTPUT, 0)" ];
+
+       Stopped -> Encoding [ label = "V4L2_ENC_CMD_START\nor\nVIDIOC_STREAMON(OUTPUT)" ];
+       Stopped -> Reset [ label = "VIDIOC_STREAMOFF(CAPTURE)" ];
+   }
+
+Querying Capabilities
+=====================
+
+1. To enumerate the set of coded formats supported by the encoder, the
+   client may call :c:func:`VIDIOC_ENUM_FMT` on ``CAPTURE``.
+
+   * The full set of supported formats will be returned, regardless of the
+     format set on ``OUTPUT``.
+
+2. To enumerate the set of supported raw formats, the client may call
+   :c:func:`VIDIOC_ENUM_FMT` on ``OUTPUT``.
+
+   * Only the formats supported for the format currently active on ``CAPTURE``
+     will be returned.
+
+   * In order to enumerate raw formats supported by a given coded format,
+     the client must first set that coded format on ``CAPTURE`` and then
+     enumerate the formats on ``OUTPUT``.
+
+3. The client may use :c:func:`VIDIOC_ENUM_FRAMESIZES` to detect supported
+   resolutions for a given format, passing the desired pixel format in
+   :c:type:`v4l2_frmsizeenum` ``pixel_format``.
+
+   * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a coded pixel
+     format will include all possible coded resolutions supported by the
+     encoder for the given coded pixel format.
+
+   * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a raw pixel format
+     will include all possible frame buffer resolutions supported by the
+     encoder for the given raw pixel format and coded format currently set on
+     ``CAPTURE``.
+
+4. The client may use :c:func:`VIDIOC_ENUM_FRAMEINTERVALS` to detect supported
+   frame intervals for a given format and resolution, passing the desired pixel
+   format in :c:type:`v4l2_frmivalenum` ``pixel_format`` and the resolution
+   in :c:type:`v4l2_frmivalenum` ``width`` and :c:type:`v4l2_frmivalenum`
+   ``height``.
+
+   * Values returned by :c:func:`VIDIOC_ENUM_FRAMEINTERVALS` for a coded pixel
+     format and coded resolution will include all possible frame intervals
+     supported by the encoder for the given coded pixel format and resolution.
+
+   * Values returned by :c:func:`VIDIOC_ENUM_FRAMEINTERVALS` for a raw pixel
+     format and resolution will include all possible frame intervals supported
+     by the encoder for the given raw pixel format and resolution and for the
+     coded format, coded resolution and coded frame interval currently set on
+     ``CAPTURE``.
+
+   * Support for :c:func:`VIDIOC_ENUM_FRAMEINTERVALS` is optional. If it is
+     not implemented, then there are no special restrictions other than the
+     limits of the codec itself.
+
+5. Supported profiles and levels for the coded format currently set on
+   ``CAPTURE``, if applicable, may be queried using their respective controls
+   via :c:func:`VIDIOC_QUERYCTRL`.
+
+6. Any additional encoder capabilities may be discovered by querying
+   their respective controls.
+
+Initialization
+==============
+
+1. Set the coded format on the ``CAPTURE`` queue via :c:func:`VIDIOC_S_FMT`.
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+     ``pixelformat``
+         the coded format to be produced.
+
+     ``sizeimage``
+         desired size of ``CAPTURE`` buffers; the encoder may adjust it to
+         match hardware requirements.
+
+     ``width``, ``height``
+         ignored (read-only).
+
+     other fields
+         follow standard semantics.
+
+   * **Returned fields:**
+
+     ``sizeimage``
+         adjusted size of ``CAPTURE`` buffers.
+
+     ``width``, ``height``
+         the coded size selected by the encoder based on current state, e.g.
+         ``OUTPUT`` format, selection rectangles, etc. (read-only).
+
+   .. important::
+
+      Changing the ``CAPTURE`` format may change the currently set ``OUTPUT``
+      format. How the new ``OUTPUT`` format is determined is up to the encoder
+      and the client must ensure it matches its needs afterwards.
+
+2. **Optional.** Enumerate supported ``OUTPUT`` formats (raw formats for
+   source) for the selected coded format via :c:func:`VIDIOC_ENUM_FMT`.
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+     other fields
+         follow standard semantics.
+
+   * **Returned fields:**
+
+     ``pixelformat``
+         raw format supported for the coded format currently selected on
+         the ``CAPTURE`` queue.
+
+     other fields
+         follow standard semantics.
+
+3. Set the raw source format on the ``OUTPUT`` queue via
+   :c:func:`VIDIOC_S_FMT`.
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+     ``pixelformat``
+         raw format of the source.
+
+     ``width``, ``height``
+         source resolution.
+
+     other fields
+         follow standard semantics.
+
+   * **Returned fields:**
+
+     ``width``, ``height``
+         may be adjusted to match encoder minimums, maximums and alignment
+         requirements, as required by the currently selected formats, as
+         reported by :c:func:`VIDIOC_ENUM_FRAMESIZES`.
+
+     other fields
+         follow standard semantics.
+
+   * Setting the ``OUTPUT`` format will reset the selection rectangles to their
+     default values, based on the new resolution, as described in the next
+     step.
+
+4. Set the raw frame interval on the ``OUTPUT`` queue via
+   :c:func:`VIDIOC_S_PARM`. This also sets the coded frame interval on the
+   ``CAPTURE`` queue to the same value.
+
+   * **Required fields:**
+
+     ``type``
+	 a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+     ``parm.output``
+	 set all fields except ``parm.output.timeperframe`` to 0.
+
+     ``parm.output.timeperframe``
+	 the desired frame interval; the encoder may adjust it to
+	 match hardware requirements.
+
+   * **Returned fields:**
+
+     ``parm.output.timeperframe``
+	 the adjusted frame interval.
+
+   .. important::
+
+      Changing the ``OUTPUT`` frame interval *also* sets the framerate that
+      the encoder uses to encode the video. So setting the frame interval
+      to 1/24 (or 24 frames per second) will produce a coded video stream
+      that can be played back at that speed. The frame interval for the
+      ``OUTPUT`` queue is just a hint, the application may provide raw
+      frames at a different rate. It can be used by the driver to help
+      schedule multiple encoders running in parallel.
+
+      In the next step the ``CAPTURE`` frame interval can optionally be
+      changed to a different value. This is useful for off-line encoding
+      were the coded frame interval can be different from the rate at
+      which raw frames are supplied.
+
+   .. important::
+
+      ``timeperframe`` deals with *frames*, not fields. So for interlaced
+      formats this is the time per two fields, since a frame consists of
+      a top and a bottom field.
+
+   .. note::
+
+      It is due to historical reasons that changing the ``OUTPUT`` frame
+      interval also changes the coded frame interval on the ``CAPTURE``
+      queue. Ideally these would be independent settings, but that would
+      break the existing API.
+
+5. **Optional** Set the coded frame interval on the ``CAPTURE`` queue via
+   :c:func:`VIDIOC_S_PARM`. This is only necessary if the coded frame
+   interval is different from the raw frame interval, which is typically
+   the case for off-line encoding. Support for this feature is signalled
+   by the :ref:`V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL <fmtdesc-flags>` format flag.
+
+   * **Required fields:**
+
+     ``type``
+	 a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``.
+
+     ``parm.capture``
+	 set all fields except ``parm.capture.timeperframe`` to 0.
+
+     ``parm.capture.timeperframe``
+	 the desired coded frame interval; the encoder may adjust it to
+	 match hardware requirements.
+
+   * **Returned fields:**
+
+     ``parm.capture.timeperframe``
+	 the adjusted frame interval.
+
+   .. important::
+
+      Changing the ``CAPTURE`` frame interval sets the framerate for the
+      coded video. It does *not* set the rate at which buffers arrive on the
+      ``CAPTURE`` queue, that depends on how fast the encoder is and how
+      fast raw frames are queued on the ``OUTPUT`` queue.
+
+   .. important::
+
+      ``timeperframe`` deals with *frames*, not fields. So for interlaced
+      formats this is the time per two fields, since a frame consists of
+      a top and a bottom field.
+
+   .. note::
+
+      Not all drivers support this functionality, in that case just set
+      the desired coded frame interval for the ``OUTPUT`` queue.
+
+      However, drivers that can schedule multiple encoders based on the
+      ``OUTPUT`` frame interval must support this optional feature.
+
+6. **Optional.** Set the visible resolution for the stream metadata via
+   :c:func:`VIDIOC_S_SELECTION` on the ``OUTPUT`` queue if it is desired
+   to be different than the full OUTPUT resolution.
+
+   * **Required fields:**
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+     ``target``
+         set to ``V4L2_SEL_TGT_CROP``.
+
+     ``r.left``, ``r.top``, ``r.width``, ``r.height``
+         visible rectangle; this must fit within the `V4L2_SEL_TGT_CROP_BOUNDS`
+         rectangle and may be subject to adjustment to match codec and
+         hardware constraints.
+
+   * **Returned fields:**
+
+     ``r.left``, ``r.top``, ``r.width``, ``r.height``
+         visible rectangle adjusted by the encoder.
+
+   * The following selection targets are supported on ``OUTPUT``:
+
+     ``V4L2_SEL_TGT_CROP_BOUNDS``
+         equal to the full source frame, matching the active ``OUTPUT``
+         format.
+
+     ``V4L2_SEL_TGT_CROP_DEFAULT``
+         equal to ``V4L2_SEL_TGT_CROP_BOUNDS``.
+
+     ``V4L2_SEL_TGT_CROP``
+         rectangle within the source buffer to be encoded into the
+         ``CAPTURE`` stream; defaults to ``V4L2_SEL_TGT_CROP_DEFAULT``.
+
+         .. note::
+
+            A common use case for this selection target is encoding a source
+            video with a resolution that is not a multiple of a macroblock,
+            e.g.  the common 1920x1080 resolution may require the source
+            buffers to be aligned to 1920x1088 for codecs with 16x16 macroblock
+            size. To avoid encoding the padding, the client needs to explicitly
+            configure this selection target to 1920x1080.
+
+   .. warning::
+
+      The encoder may adjust the crop/compose rectangles to the nearest
+      supported ones to meet codec and hardware requirements. The client needs
+      to check the adjusted rectangle returned by :c:func:`VIDIOC_S_SELECTION`.
+
+7. Allocate buffers for both ``OUTPUT`` and ``CAPTURE`` via
+   :c:func:`VIDIOC_REQBUFS`. This may be performed in any order.
+
+   * **Required fields:**
+
+     ``count``
+         requested number of buffers to allocate; greater than zero.
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT`` or
+         ``CAPTURE``.
+
+     other fields
+         follow standard semantics.
+
+   * **Returned fields:**
+
+     ``count``
+          actual number of buffers allocated.
+
+   .. warning::
+
+      The actual number of allocated buffers may differ from the ``count``
+      given. The client must check the updated value of ``count`` after the
+      call returns.
+
+   .. note::
+
+      To allocate more than the minimum number of OUTPUT buffers (for pipeline
+      depth), the client may query the ``V4L2_CID_MIN_BUFFERS_FOR_OUTPUT``
+      control to get the minimum number of buffers required, and pass the
+      obtained value plus the number of additional buffers needed in the
+      ``count`` field to :c:func:`VIDIOC_REQBUFS`.
+
+   Alternatively, :c:func:`VIDIOC_CREATE_BUFS` can be used to have more
+   control over buffer allocation.
+
+   * **Required fields:**
+
+     ``count``
+         requested number of buffers to allocate; greater than zero.
+
+     ``type``
+         a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``.
+
+     other fields
+         follow standard semantics.
+
+   * **Returned fields:**
+
+     ``count``
+         adjusted to the number of allocated buffers.
+
+8. Begin streaming on both ``OUTPUT`` and ``CAPTURE`` queues via
+   :c:func:`VIDIOC_STREAMON`. This may be performed in any order. The actual
+   encoding process starts when both queues start streaming.
+
+.. note::
+
+   If the client stops the ``CAPTURE`` queue during the encode process and then
+   restarts it again, the encoder will begin generating a stream independent
+   from the stream generated before the stop. The exact constraints depend
+   on the coded format, but may include the following implications:
+
+   * encoded frames produced after the restart must not reference any
+     frames produced before the stop, e.g. no long term references for
+     H.264/HEVC,
+
+   * any headers that must be included in a standalone stream must be
+     produced again, e.g. SPS and PPS for H.264/HEVC.
+
+Encoding
+========
+
+This state is reached after the `Initialization` sequence finishes
+successfully.  In this state, the client queues and dequeues buffers to both
+queues via :c:func:`VIDIOC_QBUF` and :c:func:`VIDIOC_DQBUF`, following the
+standard semantics.
+
+The content of encoded ``CAPTURE`` buffers depends on the active coded pixel
+format and may be affected by codec-specific extended controls, as stated
+in the documentation of each format.
+
+Both queues operate independently, following standard behavior of V4L2 buffer
+queues and memory-to-memory devices. In addition, the order of encoded frames
+dequeued from the ``CAPTURE`` queue may differ from the order of queuing raw
+frames to the ``OUTPUT`` queue, due to properties of the selected coded format,
+e.g. frame reordering.
+
+The client must not assume any direct relationship between ``CAPTURE`` and
+``OUTPUT`` buffers and any specific timing of buffers becoming
+available to dequeue. Specifically:
+
+* a buffer queued to ``OUTPUT`` may result in more than one buffer produced on
+  ``CAPTURE`` (for example, if returning an encoded frame allowed the encoder
+  to return a frame that preceded it in display, but succeeded it in the decode
+  order; however, there may be other reasons for this as well),
+
+* a buffer queued to ``OUTPUT`` may result in a buffer being produced on
+  ``CAPTURE`` later into encode process, and/or after processing further
+  ``OUTPUT`` buffers, or be returned out of order, e.g. if display
+  reordering is used,
+
+* buffers may become available on the ``CAPTURE`` queue without additional
+  buffers queued to ``OUTPUT`` (e.g. during drain or ``EOS``), because of the
+  ``OUTPUT`` buffers queued in the past whose encoding results are only
+  available at later time, due to specifics of the encoding process,
+
+* buffers queued to ``OUTPUT`` may not become available to dequeue instantly
+  after being encoded into a corresponding ``CAPTURE`` buffer, e.g. if the
+  encoder needs to use the frame as a reference for encoding further frames.
+
+.. note::
+
+   To allow matching encoded ``CAPTURE`` buffers with ``OUTPUT`` buffers they
+   originated from, the client can set the ``timestamp`` field of the
+   :c:type:`v4l2_buffer` struct when queuing an ``OUTPUT`` buffer. The
+   ``CAPTURE`` buffer(s), which resulted from encoding that ``OUTPUT`` buffer
+   will have their ``timestamp`` field set to the same value when dequeued.
+
+   In addition to the straightforward case of one ``OUTPUT`` buffer producing
+   one ``CAPTURE`` buffer, the following cases are defined:
+
+   * one ``OUTPUT`` buffer generates multiple ``CAPTURE`` buffers: the same
+     ``OUTPUT`` timestamp will be copied to multiple ``CAPTURE`` buffers,
+
+   * the encoding order differs from the presentation order (i.e. the
+     ``CAPTURE`` buffers are out-of-order compared to the ``OUTPUT`` buffers):
+     ``CAPTURE`` timestamps will not retain the order of ``OUTPUT`` timestamps.
+
+.. note::
+
+   To let the client distinguish between frame types (keyframes, intermediate
+   frames; the exact list of types depends on the coded format), the
+   ``CAPTURE`` buffers will have corresponding flag bits set in their
+   :c:type:`v4l2_buffer` struct when dequeued. See the documentation of
+   :c:type:`v4l2_buffer` and each coded pixel format for exact list of flags
+   and their meanings.
+
+Should an encoding error occur, it will be reported to the client with the level
+of details depending on the encoder capabilities. Specifically:
+
+* the ``CAPTURE`` buffer (if any) that contains the results of the failed encode
+  operation will be returned with the ``V4L2_BUF_FLAG_ERROR`` flag set,
+
+* if the encoder is able to precisely report the ``OUTPUT`` buffer(s) that triggered
+  the error, such buffer(s) will be returned with the ``V4L2_BUF_FLAG_ERROR`` flag
+  set.
+
+.. note::
+
+   If a ``CAPTURE`` buffer is too small then it is just returned with the
+   ``V4L2_BUF_FLAG_ERROR`` flag set. More work is needed to detect that this
+   error occurred because the buffer was too small, and to provide support to
+   free existing buffers that were too small.
+
+In case of a fatal failure that does not allow the encoding to continue, any
+further operations on corresponding encoder file handle will return the -EIO
+error code. The client may close the file handle and open a new one, or
+alternatively reinitialize the instance by stopping streaming on both queues,
+releasing all buffers and performing the Initialization sequence again.
+
+Encoding Parameter Changes
+==========================
+
+The client is allowed to use :c:func:`VIDIOC_S_CTRL` to change encoder
+parameters at any time. The availability of parameters is encoder-specific
+and the client must query the encoder to find the set of available controls.
+
+The ability to change each parameter during encoding is encoder-specific, as
+per the standard semantics of the V4L2 control interface. The client may
+attempt to set a control during encoding and if the operation fails with the
+-EBUSY error code, the ``CAPTURE`` queue needs to be stopped for the
+configuration change to be allowed. To do this, it may follow the `Drain`
+sequence to avoid losing the already queued/encoded frames.
+
+The timing of parameter updates is encoder-specific, as per the standard
+semantics of the V4L2 control interface. If the client needs to apply the
+parameters exactly at specific frame, using the Request API
+(:ref:`media-request-api`) should be considered, if supported by the encoder.
+
+Drain
+=====
+
+To ensure that all the queued ``OUTPUT`` buffers have been processed and the
+related ``CAPTURE`` buffers are given to the client, the client must follow the
+drain sequence described below. After the drain sequence ends, the client has
+received all encoded frames for all ``OUTPUT`` buffers queued before the
+sequence was started.
+
+1. Begin the drain sequence by issuing :c:func:`VIDIOC_ENCODER_CMD`.
+
+   * **Required fields:**
+
+     ``cmd``
+         set to ``V4L2_ENC_CMD_STOP``.
+
+     ``flags``
+         set to 0.
+
+     ``pts``
+         set to 0.
+
+   .. warning::
+
+      The sequence can be only initiated if both ``OUTPUT`` and ``CAPTURE``
+      queues are streaming. For compatibility reasons, the call to
+      :c:func:`VIDIOC_ENCODER_CMD` will not fail even if any of the queues is
+      not streaming, but at the same time it will not initiate the `Drain`
+      sequence and so the steps described below would not be applicable.
+
+2. Any ``OUTPUT`` buffers queued by the client before the
+   :c:func:`VIDIOC_ENCODER_CMD` was issued will be processed and encoded as
+   normal. The client must continue to handle both queues independently,
+   similarly to normal encode operation. This includes:
+
+   * queuing and dequeuing ``CAPTURE`` buffers, until a buffer marked with the
+     ``V4L2_BUF_FLAG_LAST`` flag is dequeued,
+
+     .. warning::
+
+        The last buffer may be empty (with :c:type:`v4l2_buffer`
+        ``bytesused`` = 0) and in that case it must be ignored by the client,
+        as it does not contain an encoded frame.
+
+     .. note::
+
+        Any attempt to dequeue more ``CAPTURE`` buffers beyond the buffer
+        marked with ``V4L2_BUF_FLAG_LAST`` will result in a -EPIPE error from
+        :c:func:`VIDIOC_DQBUF`.
+
+   * dequeuing processed ``OUTPUT`` buffers, until all the buffers queued
+     before the ``V4L2_ENC_CMD_STOP`` command are dequeued,
+
+   * dequeuing the ``V4L2_EVENT_EOS`` event, if the client subscribes to it.
+
+   .. note::
+
+      For backwards compatibility, the encoder will signal a ``V4L2_EVENT_EOS``
+      event when the last frame has been encoded and all frames are ready to be
+      dequeued. It is deprecated behavior and the client must not rely on it.
+      The ``V4L2_BUF_FLAG_LAST`` buffer flag should be used instead.
+
+3. Once all ``OUTPUT`` buffers queued before the ``V4L2_ENC_CMD_STOP`` call are
+   dequeued and the last ``CAPTURE`` buffer is dequeued, the encoder is stopped
+   and it will accept, but not process any newly queued ``OUTPUT`` buffers
+   until the client issues any of the following operations:
+
+   * ``V4L2_ENC_CMD_START`` - the encoder will not be reset and will resume
+     operation normally, with all the state from before the drain,
+
+   * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
+     ``CAPTURE`` queue - the encoder will be reset (see the `Reset` sequence)
+     and then resume encoding,
+
+   * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the
+     ``OUTPUT`` queue - the encoder will resume operation normally, however any
+     source frames queued to the ``OUTPUT`` queue between ``V4L2_ENC_CMD_STOP``
+     and :c:func:`VIDIOC_STREAMOFF` will be discarded.
+
+.. note::
+
+   Once the drain sequence is initiated, the client needs to drive it to
+   completion, as described by the steps above, unless it aborts the process by
+   issuing :c:func:`VIDIOC_STREAMOFF` on any of the ``OUTPUT`` or ``CAPTURE``
+   queues.  The client is not allowed to issue ``V4L2_ENC_CMD_START`` or
+   ``V4L2_ENC_CMD_STOP`` again while the drain sequence is in progress and they
+   will fail with -EBUSY error code if attempted.
+
+   For reference, handling of various corner cases is described below:
+
+   * In case of no buffer in the ``OUTPUT`` queue at the time the
+     ``V4L2_ENC_CMD_STOP`` command was issued, the drain sequence completes
+     immediately and the encoder returns an empty ``CAPTURE`` buffer with the
+     ``V4L2_BUF_FLAG_LAST`` flag set.
+
+   * In case of no buffer in the ``CAPTURE`` queue at the time the drain
+     sequence completes, the next time the client queues a ``CAPTURE`` buffer
+     it is returned at once as an empty buffer with the ``V4L2_BUF_FLAG_LAST``
+     flag set.
+
+   * If :c:func:`VIDIOC_STREAMOFF` is called on the ``CAPTURE`` queue in the
+     middle of the drain sequence, the drain sequence is canceled and all
+     ``CAPTURE`` buffers are implicitly returned to the client.
+
+   * If :c:func:`VIDIOC_STREAMOFF` is called on the ``OUTPUT`` queue in the
+     middle of the drain sequence, the drain sequence completes immediately and
+     next ``CAPTURE`` buffer will be returned empty with the
+     ``V4L2_BUF_FLAG_LAST`` flag set.
+
+   Although not mandatory, the availability of encoder commands may be queried
+   using :c:func:`VIDIOC_TRY_ENCODER_CMD`.
+
+Reset
+=====
+
+The client may want to request the encoder to reinitialize the encoding, so
+that the following stream data becomes independent from the stream data
+generated before. Depending on the coded format, that may imply that:
+
+* encoded frames produced after the restart must not reference any frames
+  produced before the stop, e.g. no long term references for H.264/HEVC,
+
+* any headers that must be included in a standalone stream must be produced
+  again, e.g. SPS and PPS for H.264/HEVC.
+
+This can be achieved by performing the reset sequence.
+
+1. Perform the `Drain` sequence to ensure all the in-flight encoding finishes
+   and respective buffers are dequeued.
+
+2. Stop streaming on the ``CAPTURE`` queue via :c:func:`VIDIOC_STREAMOFF`. This
+   will return all currently queued ``CAPTURE`` buffers to the client, without
+   valid frame data.
+
+3. Start streaming on the ``CAPTURE`` queue via :c:func:`VIDIOC_STREAMON` and
+   continue with regular encoding sequence. The encoded frames produced into
+   ``CAPTURE`` buffers from now on will contain a standalone stream that can be
+   decoded without the need for frames encoded before the reset sequence,
+   starting at the first ``OUTPUT`` buffer queued after issuing the
+   `V4L2_ENC_CMD_STOP` of the `Drain` sequence.
+
+This sequence may be also used to change encoding parameters for encoders
+without the ability to change the parameters on the fly.
+
+Commit Points
+=============
+
+Setting formats and allocating buffers triggers changes in the behavior of the
+encoder.
+
+1. Setting the format on the ``CAPTURE`` queue may change the set of formats
+   supported/advertised on the ``OUTPUT`` queue. In particular, it also means
+   that the ``OUTPUT`` format may be reset and the client must not rely on the
+   previously set format being preserved.
+
+2. Enumerating formats on the ``OUTPUT`` queue always returns only formats
+   supported for the current ``CAPTURE`` format.
+
+3. Setting the format on the ``OUTPUT`` queue does not change the list of
+   formats available on the ``CAPTURE`` queue. An attempt to set the ``OUTPUT``
+   format that is not supported for the currently selected ``CAPTURE`` format
+   will result in the encoder adjusting the requested ``OUTPUT`` format to a
+   supported one.
+
+4. Enumerating formats on the ``CAPTURE`` queue always returns the full set of
+   supported coded formats, irrespective of the current ``OUTPUT`` format.
+
+5. While buffers are allocated on any of the ``OUTPUT`` or ``CAPTURE`` queues,
+   the client must not change the format on the ``CAPTURE`` queue. Drivers will
+   return the -EBUSY error code for any such format change attempt.
+
+To summarize, setting formats and allocation must always start with the
+``CAPTURE`` queue and the ``CAPTURE`` queue is the master that governs the
+set of supported formats for the ``OUTPUT`` queue.