Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 153 insertions, 0 deletions

diff --git a/Documentation/virt/kvm/halt-polling.rst b/Documentation/virt/kvm/halt-polling.rst
new file mode 100644
index 0000000000..c82a04b709
--- /dev/null
+++ b/Documentation/virt/kvm/halt-polling.rst
@@ -0,0 +1,153 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+The KVM halt polling system
+===========================
+
+The KVM halt polling system provides a feature within KVM whereby the latency
+of a guest can, under some circumstances, be reduced by polling in the host
+for some time period after the guest has elected to no longer run by cedeing.
+That is, when a guest vcpu has ceded, or in the case of powerpc when all of the
+vcpus of a single vcore have ceded, the host kernel polls for wakeup conditions
+before giving up the cpu to the scheduler in order to let something else run.
+
+Polling provides a latency advantage in cases where the guest can be run again
+very quickly by at least saving us a trip through the scheduler, normally on
+the order of a few micro-seconds, although performance benefits are workload
+dependent. In the event that no wakeup source arrives during the polling
+interval or some other task on the runqueue is runnable the scheduler is
+invoked. Thus halt polling is especially useful on workloads with very short
+wakeup periods where the time spent halt polling is minimised and the time
+savings of not invoking the scheduler are distinguishable.
+
+The generic halt polling code is implemented in:
+
+	virt/kvm/kvm_main.c: kvm_vcpu_block()
+
+The powerpc kvm-hv specific case is implemented in:
+
+	arch/powerpc/kvm/book3s_hv.c: kvmppc_vcore_blocked()
+
+Halt Polling Interval
+=====================
+
+The maximum time for which to poll before invoking the scheduler, referred to
+as the halt polling interval, is increased and decreased based on the perceived
+effectiveness of the polling in an attempt to limit pointless polling.
+This value is stored in either the vcpu struct:
+
+	kvm_vcpu->halt_poll_ns
+
+or in the case of powerpc kvm-hv, in the vcore struct:
+
+	kvmppc_vcore->halt_poll_ns
+
+Thus this is a per vcpu (or vcore) value.
+
+During polling if a wakeup source is received within the halt polling interval,
+the interval is left unchanged. In the event that a wakeup source isn't
+received during the polling interval (and thus schedule is invoked) there are
+two options, either the polling interval and total block time[0] were less than
+the global max polling interval (see module params below), or the total block
+time was greater than the global max polling interval.
+
+In the event that both the polling interval and total block time were less than
+the global max polling interval then the polling interval can be increased in
+the hope that next time during the longer polling interval the wake up source
+will be received while the host is polling and the latency benefits will be
+received. The polling interval is grown in the function grow_halt_poll_ns() and
+is multiplied by the module parameters halt_poll_ns_grow and
+halt_poll_ns_grow_start.
+
+In the event that the total block time was greater than the global max polling
+interval then the host will never poll for long enough (limited by the global
+max) to wakeup during the polling interval so it may as well be shrunk in order
+to avoid pointless polling. The polling interval is shrunk in the function
+shrink_halt_poll_ns() and is divided by the module parameter
+halt_poll_ns_shrink, or set to 0 iff halt_poll_ns_shrink == 0.
+
+It is worth noting that this adjustment process attempts to hone in on some
+steady state polling interval but will only really do a good job for wakeups
+which come at an approximately constant rate, otherwise there will be constant
+adjustment of the polling interval.
+
+[0] total block time:
+		      the time between when the halt polling function is
+		      invoked and a wakeup source received (irrespective of
+		      whether the scheduler is invoked within that function).
+
+Module Parameters
+=================
+
+The kvm module has 3 tuneable module parameters to adjust the global max
+polling interval as well as the rate at which the polling interval is grown and
+shrunk. These variables are defined in include/linux/kvm_host.h and as module
+parameters in virt/kvm/kvm_main.c, or arch/powerpc/kvm/book3s_hv.c in the
+powerpc kvm-hv case.
+
++-----------------------+---------------------------+-------------------------+
+|Module Parameter	|   Description		    |	     Default Value    |
++-----------------------+---------------------------+-------------------------+
+|halt_poll_ns		| The global max polling    | KVM_HALT_POLL_NS_DEFAULT|
+|			| interval which defines    |			      |
+|			| the ceiling value of the  |			      |
+|			| polling interval for      | (per arch value)	      |
+|			| each vcpu.		    |			      |
++-----------------------+---------------------------+-------------------------+
+|halt_poll_ns_grow	| The value by which the    | 2			      |
+|			| halt polling interval is  |			      |
+|			| multiplied in the	    |			      |
+|			| grow_halt_poll_ns()	    |			      |
+|			| function.		    |			      |
++-----------------------+---------------------------+-------------------------+
+|halt_poll_ns_grow_start| The initial value to grow | 10000		      |
+|			| to from zero in the	    |			      |
+|			| grow_halt_poll_ns()	    |			      |
+|			| function.		    |			      |
++-----------------------+---------------------------+-------------------------+
+|halt_poll_ns_shrink	| The value by which the    | 0			      |
+|			| halt polling interval is  |			      |
+|			| divided in the	    |			      |
+|			| shrink_halt_poll_ns()	    |			      |
+|			| function.		    |			      |
++-----------------------+---------------------------+-------------------------+
+
+These module parameters can be set from the sysfs files in:
+
+	/sys/module/kvm/parameters/
+
+Note: these module parameters are system-wide values and are not able to
+      be tuned on a per vm basis.
+
+Any changes to these parameters will be picked up by new and existing vCPUs the
+next time they halt, with the notable exception of VMs using KVM_CAP_HALT_POLL
+(see next section).
+
+KVM_CAP_HALT_POLL
+=================
+
+KVM_CAP_HALT_POLL is a VM capability that allows userspace to override halt_poll_ns
+on a per-VM basis. VMs using KVM_CAP_HALT_POLL ignore halt_poll_ns completely (but
+still obey halt_poll_ns_grow, halt_poll_ns_grow_start, and halt_poll_ns_shrink).
+
+See Documentation/virt/kvm/api.rst for more information on this capability.
+
+Further Notes
+=============
+
+- Care should be taken when setting the halt_poll_ns module parameter as a large value
+  has the potential to drive the cpu usage to 100% on a machine which would be almost
+  entirely idle otherwise. This is because even if a guest has wakeups during which very
+  little work is done and which are quite far apart, if the period is shorter than the
+  global max polling interval (halt_poll_ns) then the host will always poll for the
+  entire block time and thus cpu utilisation will go to 100%.
+
+- Halt polling essentially presents a trade-off between power usage and latency and
+  the module parameters should be used to tune the affinity for this. Idle cpu time is
+  essentially converted to host kernel time with the aim of decreasing latency when
+  entering the guest.
+
+- Halt polling will only be conducted by the host when no other tasks are runnable on
+  that cpu, otherwise the polling will cease immediately and schedule will be invoked to
+  allow that other task to run. Thus this doesn't allow a guest to cause denial of service
+  of the cpu.