Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 126 insertions, 40 deletions

diff --git a/Documentation/virt/coco/sev-guest.rst b/Documentation/virt/coco/sev-guest.rst
index 68b0d2363a..e1eaf6a830 100644
--- a/Documentation/virt/coco/sev-guest.rst
+++ b/Documentation/virt/coco/sev-guest.rst
@@ -67,6 +67,23 @@ counter (e.g. counter overflow), then -EIO will be returned.
                 };
         };
 
+The host ioctls are issued to a file descriptor of the /dev/sev device.
+The ioctl accepts the command ID/input structure documented below.
+
+::
+
+        struct sev_issue_cmd {
+                /* Command ID */
+                __u32 cmd;
+
+                /* Command request structure */
+                __u64 data;
+
+                /* Firmware error code on failure (see psp-sev.h) */
+                __u32 error;
+        };
+
+
 2.1 SNP_GET_REPORT
 ------------------
 
@@ -124,6 +141,41 @@ be updated with the expected value.
 
 See GHCB specification for further detail on how to parse the certificate blob.
 
+2.4 SNP_PLATFORM_STATUS
+-----------------------
+:Technology: sev-snp
+:Type: hypervisor ioctl cmd
+:Parameters (out): struct sev_user_data_snp_status
+:Returns (out): 0 on success, -negative on error
+
+The SNP_PLATFORM_STATUS command is used to query the SNP platform status. The
+status includes API major, minor version and more. See the SEV-SNP
+specification for further details.
+
+2.5 SNP_COMMIT
+--------------
+:Technology: sev-snp
+:Type: hypervisor ioctl cmd
+:Returns (out): 0 on success, -negative on error
+
+SNP_COMMIT is used to commit the currently installed firmware using the
+SEV-SNP firmware SNP_COMMIT command. This prevents roll-back to a previously
+committed firmware version. This will also update the reported TCB to match
+that of the currently installed firmware.
+
+2.6 SNP_SET_CONFIG
+------------------
+:Technology: sev-snp
+:Type: hypervisor ioctl cmd
+:Parameters (in): struct sev_user_data_snp_config
+:Returns (out): 0 on success, -negative on error
+
+SNP_SET_CONFIG is used to set the system-wide configuration such as
+reported TCB version in the attestation report. The command is similar
+to SNP_CONFIG command defined in the SEV-SNP spec. The current values of
+the firmware parameters affected by this command can be queried via
+SNP_PLATFORM_STATUS.
+
 3. SEV-SNP CPUID Enforcement
 ============================
 
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index 09c7e585ff..0b5a33ee71 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -372,7 +372,7 @@ The bits in the dirty bitmap are cleared before the ioctl returns, unless
 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is enabled.  For more information,
 see the description of the capability.
 
-Note that the Xen shared info page, if configured, shall always be assumed
+Note that the Xen shared_info page, if configured, shall always be assumed
 to be dirty. KVM will not explicitly mark it such.
 
 
@@ -5487,8 +5487,9 @@ KVM_PV_ASYNC_CLEANUP_PERFORM
 		__u8 long_mode;
 		__u8 vector;
 		__u8 runstate_update_flag;
-		struct {
+		union {
 			__u64 gfn;
+			__u64 hva;
 		} shared_info;
 		struct {
 			__u32 send_port;
@@ -5516,19 +5517,20 @@ type values:
 
 KVM_XEN_ATTR_TYPE_LONG_MODE
   Sets the ABI mode of the VM to 32-bit or 64-bit (long mode). This
-  determines the layout of the shared info pages exposed to the VM.
+  determines the layout of the shared_info page exposed to the VM.
 
 KVM_XEN_ATTR_TYPE_SHARED_INFO
-  Sets the guest physical frame number at which the Xen "shared info"
+  Sets the guest physical frame number at which the Xen shared_info
   page resides. Note that although Xen places vcpu_info for the first
   32 vCPUs in the shared_info page, KVM does not automatically do so
-  and instead requires that KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO be used
-  explicitly even when the vcpu_info for a given vCPU resides at the
-  "default" location in the shared_info page. This is because KVM may
-  not be aware of the Xen CPU id which is used as the index into the
-  vcpu_info[] array, so may know the correct default location.
-
-  Note that the shared info page may be constantly written to by KVM;
+  and instead requires that KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO or
+  KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO_HVA be used explicitly even when
+  the vcpu_info for a given vCPU resides at the "default" location
+  in the shared_info page. This is because KVM may not be aware of
+  the Xen CPU id which is used as the index into the vcpu_info[]
+  array, so may know the correct default location.
+
+  Note that the shared_info page may be constantly written to by KVM;
   it contains the event channel bitmap used to deliver interrupts to
   a Xen guest, amongst other things. It is exempt from dirty tracking
   mechanisms — KVM will not explicitly mark the page as dirty each
@@ -5537,9 +5539,21 @@ KVM_XEN_ATTR_TYPE_SHARED_INFO
   any vCPU has been running or any event channel interrupts can be
   routed to the guest.
 
-  Setting the gfn to KVM_XEN_INVALID_GFN will disable the shared info
+  Setting the gfn to KVM_XEN_INVALID_GFN will disable the shared_info
   page.
 
+KVM_XEN_ATTR_TYPE_SHARED_INFO_HVA
+  If the KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA flag is also set in the
+  Xen capabilities, then this attribute may be used to set the
+  userspace address at which the shared_info page resides, which
+  will always be fixed in the VMM regardless of where it is mapped
+  in guest physical address space. This attribute should be used in
+  preference to KVM_XEN_ATTR_TYPE_SHARED_INFO as it avoids
+  unnecessary invalidation of an internal cache when the page is
+  re-mapped in guest physcial address space.
+
+  Setting the hva to zero will disable the shared_info page.
+
 KVM_XEN_ATTR_TYPE_UPCALL_VECTOR
   Sets the exception vector used to deliver Xen event channel upcalls.
   This is the HVM-wide vector injected directly by the hypervisor
@@ -5636,6 +5650,21 @@ KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO
   on dirty logging. Setting the gpa to KVM_XEN_INVALID_GPA will disable
   the vcpu_info.
 
+KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO_HVA
+  If the KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA flag is also set in the
+  Xen capabilities, then this attribute may be used to set the
+  userspace address of the vcpu_info for a given vCPU. It should
+  only be used when the vcpu_info resides at the "default" location
+  in the shared_info page. In this case it is safe to assume the
+  userspace address will not change, because the shared_info page is
+  an overlay on guest memory and remains at a fixed host address
+  regardless of where it is mapped in guest physical address space
+  and hence unnecessary invalidation of an internal cache may be
+  avoided if the guest memory layout is modified.
+  If the vcpu_info does not reside at the "default" location then
+  it is not guaranteed to remain at the same host address and
+  hence the aforementioned cache invalidation is required.
+
 KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO
   Sets the guest physical address of an additional pvclock structure
   for a given vCPU. This is typically used for guest vsyscall support.
diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
index 995780088e..84335d119f 100644
--- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst
+++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
@@ -46,21 +46,16 @@ SEV hardware uses ASIDs to associate a memory encryption key with a VM.
 Hence, the ASID for the SEV-enabled guests must be from 1 to a maximum value
 defined in the CPUID 0x8000001f[ecx] field.
 
-SEV Key Management
-==================
+The KVM_MEMORY_ENCRYPT_OP ioctl
+===============================
 
-The SEV guest key management is handled by a separate processor called the AMD
-Secure Processor (AMD-SP). Firmware running inside the AMD-SP provides a secure
-key management interface to perform common hypervisor activities such as
-encrypting bootstrap code, snapshot, migrating and debugging the guest. For more
-information, see the SEV Key Management spec [api-spec]_
-
-The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP.  If the argument
-to KVM_MEMORY_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled
-and ``ENOTTY`` if it is disabled (on some older versions of Linux,
-the ioctl runs normally even with a NULL argument, and therefore will
-likely return ``EFAULT``).  If non-NULL, the argument to KVM_MEMORY_ENCRYPT_OP
-must be a struct kvm_sev_cmd::
+The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP, which operates on
+the VM file descriptor.  If the argument to KVM_MEMORY_ENCRYPT_OP is NULL,
+the ioctl returns 0 if SEV is enabled and ``ENOTTY`` if it is disabled
+(on some older versions of Linux, the ioctl tries to run normally even
+with a NULL argument, and therefore will likely return ``EFAULT`` instead
+of zero if SEV is enabled).  If non-NULL, the argument to
+KVM_MEMORY_ENCRYPT_OP must be a struct kvm_sev_cmd::
 
        struct kvm_sev_cmd {
                __u32 id;
@@ -87,10 +82,6 @@ guests, such as launching, running, snapshotting, migrating and decommissioning.
 The KVM_SEV_INIT command is used by the hypervisor to initialize the SEV platform
 context. In a typical workflow, this command should be the first command issued.
 
-The firmware can be initialized either by using its own non-volatile storage or
-the OS can manage the NV storage for the firmware using the module parameter
-``init_ex_path``. If the file specified by ``init_ex_path`` does not exist or
-is invalid, the OS will create or override the file with output from PSP.
 
 Returns: 0 on success, -negative on error
 
@@ -434,6 +425,21 @@ issued by the hypervisor to make the guest ready for execution.
 
 Returns: 0 on success, -negative on error
 
+Firmware Management
+===================
+
+The SEV guest key management is handled by a separate processor called the AMD
+Secure Processor (AMD-SP). Firmware running inside the AMD-SP provides a secure
+key management interface to perform common hypervisor activities such as
+encrypting bootstrap code, snapshot, migrating and debugging the guest. For more
+information, see the SEV Key Management spec [api-spec]_
+
+The AMD-SP firmware can be initialized either by using its own non-volatile
+storage or the OS can manage the NV storage for the firmware using
+parameter ``init_ex_path`` of the ``ccp`` module. If the file specified
+by ``init_ex_path`` does not exist or is invalid, the OS will create or
+override the file with PSP non-volatile storage.
+
 References
 ==========
 
diff --git a/Documentation/virt/kvm/x86/msr.rst b/Documentation/virt/kvm/x86/msr.rst
index 9315fc385f..3aecf2a70e 100644
--- a/Documentation/virt/kvm/x86/msr.rst
+++ b/Documentation/virt/kvm/x86/msr.rst
@@ -193,8 +193,8 @@ data:
 	Asynchronous page fault (APF) control MSR.
 
 	Bits 63-6 hold 64-byte aligned physical address of a 64 byte memory area
-	which must be in guest RAM and must be zeroed. This memory is expected
-	to hold a copy of the following structure::
+	which must be in guest RAM. This memory is expected to hold the
+	following structure::
 
 	  struct kvm_vcpu_pv_apf_data {
 		/* Used for 'page not present' events delivered via #PF */
@@ -204,7 +204,6 @@ data:
 		__u32 token;
 
 		__u8 pad[56];
-		__u32 enabled;
 	  };
 
 	Bits 5-4 of the MSR are reserved and should be zero. Bit 0 is set to 1
@@ -232,14 +231,14 @@ data:
 	as regular page fault, guest must reset 'flags' to '0' before it does
 	something that can generate normal page fault.
 
-	Bytes 5-7 of 64 byte memory location ('token') will be written to by the
+	Bytes 4-7 of 64 byte memory location ('token') will be written to by the
 	hypervisor at the time of APF 'page ready' event injection. The content
-	of these bytes is a token which was previously delivered as 'page not
-	present' event. The event indicates the page in now available. Guest is
-	supposed to write '0' to 'token' when it is done handling 'page ready'
-	event and to write 1' to MSR_KVM_ASYNC_PF_ACK after clearing the location;
-	writing to the MSR forces KVM to re-scan its queue and deliver the next
-	pending notification.
+	of these bytes is a token which was previously delivered in CR2 as
+	'page not present' event. The event indicates the page is now available.
+	Guest is supposed to write '0' to 'token' when it is done handling
+	'page ready' event and to write '1' to MSR_KVM_ASYNC_PF_ACK after
+	clearing the location; writing to the MSR forces KVM to re-scan its
+	queue and deliver the next pending notification.
 
 	Note, MSR_KVM_ASYNC_PF_INT MSR specifying the interrupt vector for 'page
 	ready' APF delivery needs to be written to before enabling APF mechanism