Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

83 files changed, 33807 insertions, 0 deletions

diff --git a/arch/alpha/kernel/.gitignore b/arch/alpha/kernel/.gitignore
new file mode 100644
index 0000000000..bbb90f92d0
--- /dev/null
+++ b/arch/alpha/kernel/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
new file mode 100644
index 0000000000..fb4efec7cb
--- /dev/null
+++ b/arch/alpha/kernel/Makefile
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+extra-y		:= vmlinux.lds
+asflags-y	:= $(KBUILD_CFLAGS)
+ccflags-y	:= -Wno-sign-compare
+
+obj-y    := head.o entry.o traps.o process.o osf_sys.o irq.o \
+	    irq_alpha.o signal.o setup.o ptrace.o time.o \
+	    systbls.o err_common.o io.o bugs.o termios.o
+
+obj-$(CONFIG_VGA_HOSE)	+= console.o
+obj-$(CONFIG_SMP)	+= smp.o
+obj-$(CONFIG_PCI)	+= pci.o pci_iommu.o pci-sysfs.o
+obj-$(CONFIG_SRM_ENV)	+= srm_env.o
+obj-$(CONFIG_MODULES)	+= module.o
+obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_RTC_DRV_ALPHA) += rtc.o
+obj-$(CONFIG_AUDIT)	+= audit.o
+
+ifdef CONFIG_ALPHA_GENERIC
+
+obj-y 	 += core_apecs.o core_cia.o core_irongate.o core_lca.o \
+	    core_mcpcia.o core_polaris.o core_t2.o \
+	    core_tsunami.o
+
+obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
+	    sys_jensen.o sys_miata.o sys_mikasa.o sys_nautilus.o \
+	    sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
+	    sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
+
+ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
+obj-y	 += core_marvel.o core_titan.o core_wildfire.o
+obj-y	 += sys_marvel.o sys_titan.o sys_wildfire.o
+obj-y    += err_ev7.o err_titan.o err_marvel.o
+endif
+
+obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
+obj-y	 += err_ev6.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
+obj-y    += srmcons.o
+
+else
+
+# Misc support
+obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
+
+# Core logic support
+obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
+obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o
+obj-$(CONFIG_ALPHA_IRONGATE)	+= core_irongate.o
+obj-$(CONFIG_ALPHA_LCA)		+= core_lca.o
+obj-$(CONFIG_ALPHA_MARVEL)	+= core_marvel.o gct.o
+obj-$(CONFIG_ALPHA_MCPCIA)	+= core_mcpcia.o
+obj-$(CONFIG_ALPHA_POLARIS)	+= core_polaris.o
+obj-$(CONFIG_ALPHA_T2)		+= core_t2.o
+obj-$(CONFIG_ALPHA_TSUNAMI)	+= core_tsunami.o
+obj-$(CONFIG_ALPHA_TITAN)	+= core_titan.o
+obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
+
+# Board support
+obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
+obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
+				   pc873xx.o
+obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
+				   pc873xx.o
+obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
+				   pc873xx.o
+obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
+				   smc37c93x.o
+obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
+				   smc37c93x.o
+obj-$(CONFIG_ALPHA_DP264)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
+obj-$(CONFIG_ALPHA_SHARK)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
+obj-$(CONFIG_ALPHA_TITAN)	+= sys_titan.o irq_i8259.o smc37c669.o
+obj-$(CONFIG_ALPHA_EB64P)	+= sys_eb64p.o irq_i8259.o
+obj-$(CONFIG_ALPHA_EB66)	+= sys_eb64p.o irq_i8259.o
+obj-$(CONFIG_ALPHA_EIGER)	+= sys_eiger.o irq_i8259.o
+obj-$(CONFIG_ALPHA_JENSEN)	+= sys_jensen.o pci-noop.o irq_i8259.o
+obj-$(CONFIG_ALPHA_MARVEL)	+= sys_marvel.o 
+obj-$(CONFIG_ALPHA_MIATA)	+= sys_miata.o irq_pyxis.o irq_i8259.o \
+				   es1888.o smc37c669.o
+obj-$(CONFIG_ALPHA_MIKASA)	+= sys_mikasa.o irq_i8259.o irq_srm.o
+obj-$(CONFIG_ALPHA_NAUTILUS)	+= sys_nautilus.o irq_i8259.o irq_srm.o
+obj-$(CONFIG_ALPHA_NORITAKE)	+= sys_noritake.o irq_i8259.o
+obj-$(CONFIG_ALPHA_RAWHIDE)	+= sys_rawhide.o irq_i8259.o
+obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
+obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
+obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
+obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
+				   irq_srm.o smc37c669.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
+obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
+
+# Error support
+obj-$(CONFIG_ALPHA_MARVEL)	+= err_ev7.o err_marvel.o
+obj-$(CONFIG_ALPHA_NAUTILUS)	+= err_ev6.o
+obj-$(CONFIG_ALPHA_TITAN)	+= err_ev6.o err_titan.o
+
+endif # GENERIC
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
new file mode 100644
index 0000000000..b121294bee
--- /dev/null
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/kbuild.h>
+#include <asm/io.h>
+
+void foo(void)
+{
+	DEFINE(TI_TASK, offsetof(struct thread_info, task));
+	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+	DEFINE(TI_FP, offsetof(struct thread_info, fp));
+	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
+	BLANK();
+
+        DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+        DEFINE(TASK_CRED, offsetof(struct task_struct, cred));
+        DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
+        DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
+        DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
+        BLANK();
+
+        DEFINE(CRED_UID,  offsetof(struct cred, uid));
+        DEFINE(CRED_EUID, offsetof(struct cred, euid));
+        DEFINE(CRED_GID,  offsetof(struct cred, gid));
+        DEFINE(CRED_EGID, offsetof(struct cred, egid));
+        BLANK();
+
+	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
+	DEFINE(PT_PTRACED, PT_PTRACED);
+	DEFINE(CLONE_VM, CLONE_VM);
+	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
+	DEFINE(SIGCHLD, SIGCHLD);
+	BLANK();
+
+	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
+	DEFINE(HAE_REG, offsetof(struct alpha_machine_vector, hae_register));
+}
diff --git a/arch/alpha/kernel/audit.c b/arch/alpha/kernel/audit.c
new file mode 100644
index 0000000000..3ab0470978
--- /dev/null
+++ b/arch/alpha/kernel/audit.c
@@ -0,0 +1,62 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+	return 0;
+}
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return AUDITSC_OPEN;
+	case __NR_openat:
+		return AUDITSC_OPENAT;
+	case __NR_execve:
+		return AUDITSC_EXECVE;
+	case __NR_openat2:
+		return AUDITSC_OPENAT2;
+	default:
+		return AUDITSC_NATIVE;
+	}
+}
+
+static int __init audit_classes_init(void)
+{
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+	audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
+	return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/alpha/kernel/bugs.c b/arch/alpha/kernel/bugs.c
new file mode 100644
index 0000000000..08cc10d7fa
--- /dev/null
+++ b/arch/alpha/kernel/bugs.c
@@ -0,0 +1,45 @@
+
+#include <asm/hwrpb.h>
+#include <linux/device.h>
+
+
+#ifdef CONFIG_SYSFS
+
+static int cpu_is_ev6_or_later(void)
+{
+	struct percpu_struct *cpu;
+        unsigned long cputype;
+
+        cpu = (struct percpu_struct *)((char *)hwrpb + hwrpb->processor_offset);
+        cputype = cpu->type & 0xffffffff;
+        /* Include all of EV6, EV67, EV68, EV7, EV79 and EV69. */
+        return (cputype == EV6_CPU) || ((cputype >= EV67_CPU) && (cputype <= EV69_CPU));
+}
+
+ssize_t cpu_show_meltdown(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	if (cpu_is_ev6_or_later())
+		return sprintf(buf, "Vulnerable\n");
+	else
+		return sprintf(buf, "Not affected\n");
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev,
+                            struct device_attribute *attr, char *buf)
+{
+	if (cpu_is_ev6_or_later())
+		return sprintf(buf, "Vulnerable\n");
+	else
+		return sprintf(buf, "Not affected\n");
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	if (cpu_is_ev6_or_later())
+		return sprintf(buf, "Vulnerable\n");
+	else
+		return sprintf(buf, "Not affected\n");
+}
+#endif
diff --git a/arch/alpha/kernel/console.c b/arch/alpha/kernel/console.c
new file mode 100644
index 0000000000..5476279329
--- /dev/null
+++ b/arch/alpha/kernel/console.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/console.c
+ *
+ * Architecture-specific specific support for VGA device on 
+ * non-0 I/O hose
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/vt.h>
+#include <asm/vga.h>
+#include <asm/machvec.h>
+
+#include "pci_impl.h"
+
+#ifdef CONFIG_VGA_HOSE
+
+struct pci_controller *pci_vga_hose;
+static struct resource alpha_vga = {
+	.name	= "alpha-vga+",
+	.flags	= IORESOURCE_IO,
+	.start	= 0x3C0,
+	.end	= 0x3DF
+};
+
+static struct pci_controller * __init 
+default_vga_hose_select(struct pci_controller *h1, struct pci_controller *h2)
+{
+	if (h2->index < h1->index)
+		return h2;
+
+	return h1;
+}
+
+void __init 
+locate_and_init_vga(void *(*sel_func)(void *, void *))
+{
+	struct pci_controller *hose = NULL;
+	struct pci_dev *dev = NULL;
+
+	/* Default the select function */
+	if (!sel_func) sel_func = (void *)default_vga_hose_select;
+
+	/* Find the console VGA device */
+	for(dev=NULL; (dev=pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, dev));) {
+		if (!hose)
+			hose = dev->sysdata;
+		else
+			hose = sel_func(hose, dev->sysdata);
+	}
+
+	/* Did we already initialize the correct one? Is there one? */
+	if (!hose || (conswitchp == &vga_con && pci_vga_hose == hose))
+		return;
+
+	/* Create a new VGA ioport resource WRT the hose it is on. */
+	alpha_vga.start += hose->io_space->start;
+	alpha_vga.end += hose->io_space->start;
+	request_resource(hose->io_space, &alpha_vga);
+
+	/* Set the VGA hose and init the new console. */
+	pci_vga_hose = hose;
+	console_lock();
+	do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
+	console_unlock();
+}
+
+void __init
+find_console_vga_hose(void)
+{
+	u64 *pu64 = (u64 *)((u64)hwrpb + hwrpb->ctbt_offset);
+
+	if (pu64[7] == 3) {	/* TERM_TYPE == graphics */
+		struct pci_controller *hose;
+		int h = (pu64[30] >> 24) & 0xff;	/* console hose # */
+
+		/*
+		 * Our hose numbering DOES match the console's, so find
+		 * the right one...
+		 */
+		for (hose = hose_head; hose; hose = hose->next) {
+			if (hose->index == h) break;
+		}
+
+		if (hose) {
+			printk("Console graphics on hose %d\n", h);
+			pci_vga_hose = hose;
+		}
+	}
+}
+
+#endif
diff --git a/arch/alpha/kernel/core_apecs.c b/arch/alpha/kernel/core_apecs.c
new file mode 100644
index 0000000000..6df765ff2b
--- /dev/null
+++ b/arch/alpha/kernel/core_apecs.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_apecs.c
+ *
+ * Rewritten for Apecs from the lca.c from:
+ *
+ * Written by David Mosberger (davidm@cs.arizona.edu) with some code
+ * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
+ * bios code.
+ *
+ * Code common to all APECS core logic chips.
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_apecs.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+#include <asm/mce.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/*
+ * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
+ * One plausible explanation is that the i/o controller does not properly
+ * handle the system transaction.  Another involves timing.  Ho hum.
+ */
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBGC(args)	printk args
+#else
+# define DBGC(args)
+#endif
+
+#define vuip	volatile unsigned int  *
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address and setup the APECS_HAXR2 register
+ * accordingly.  It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Type 0:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:11	Device select bit.
+ * 	10:8	Function number
+ * 	 7:2	Register number
+ *
+ * Type 1:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:24	reserved
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, unsigned char *type1)
+{
+	unsigned long addr;
+	u8 bus = pbus->number;
+
+	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
+	      " pci_addr=0x%p, type1=0x%p)\n",
+	      bus, device_fn, where, pci_addr, type1));
+
+	if (bus == 0) {
+		int device = device_fn >> 3;
+
+		/* type 0 configuration cycle: */
+
+		if (device > 20) {
+			DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
+			      device));
+			return -1;
+		}
+
+		*type1 = 0;
+		addr = (device_fn << 8) | (where);
+	} else {
+		/* type 1 configuration cycle: */
+		*type1 = 1;
+		addr = (bus << 16) | (device_fn << 8) | (where);
+	}
+	*pci_addr = addr;
+	DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return 0;
+}
+
+static unsigned int
+conf_read(unsigned long addr, unsigned char type1)
+{
+	unsigned long flags;
+	unsigned int stat0, value;
+	unsigned int haxr2 = 0;
+
+	local_irq_save(flags);	/* avoid getting hit by machine check */
+
+	DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
+
+	/* Reset status register to avoid losing errors.  */
+	stat0 = *(vuip)APECS_IOC_DCSR;
+	*(vuip)APECS_IOC_DCSR = stat0;
+	mb();
+	DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
+
+	/* If Type1 access, must set HAE #2. */
+	if (type1) {
+		haxr2 = *(vuip)APECS_IOC_HAXR2;
+		mb();
+		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
+		DBGC(("conf_read: TYPE1 access\n"));
+	}
+
+	draina();
+	mcheck_expected(0) = 1;
+	mcheck_taken(0) = 0;
+	mb();
+
+	/* Access configuration space.  */
+
+	/* Some SRMs step on these registers during a machine check.  */
+	asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
+		     : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
+
+	if (mcheck_taken(0)) {
+		mcheck_taken(0) = 0;
+		value = 0xffffffffU;
+		mb();
+	}
+	mcheck_expected(0) = 0;
+	mb();
+
+#if 1
+	/*
+	 * david.rusling@reo.mts.dec.com.  This code is needed for the
+	 * EB64+ as it does not generate a machine check (why I don't
+	 * know).  When we build kernels for one particular platform
+	 * then we can make this conditional on the type.
+	 */
+	draina();
+
+	/* Now look for any errors.  */
+	stat0 = *(vuip)APECS_IOC_DCSR;
+	DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
+
+	/* Is any error bit set? */
+	if (stat0 & 0xffe0U) {
+		/* If not NDEV, print status.  */
+		if (!(stat0 & 0x0800)) {
+			printk("apecs.c:conf_read: got stat0=%x\n", stat0);
+		}
+
+		/* Reset error status.  */
+		*(vuip)APECS_IOC_DCSR = stat0;
+		mb();
+		wrmces(0x7);			/* reset machine check */
+		value = 0xffffffff;
+	}
+#endif
+
+	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
+	if (type1) {
+		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
+		mb();
+	}
+	local_irq_restore(flags);
+
+	return value;
+}
+
+static void
+conf_write(unsigned long addr, unsigned int value, unsigned char type1)
+{
+	unsigned long flags;
+	unsigned int stat0;
+	unsigned int haxr2 = 0;
+
+	local_irq_save(flags);	/* avoid getting hit by machine check */
+
+	/* Reset status register to avoid losing errors.  */
+	stat0 = *(vuip)APECS_IOC_DCSR;
+	*(vuip)APECS_IOC_DCSR = stat0;
+	mb();
+
+	/* If Type1 access, must set HAE #2. */
+	if (type1) {
+		haxr2 = *(vuip)APECS_IOC_HAXR2;
+		mb();
+		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
+	}
+
+	draina();
+	mcheck_expected(0) = 1;
+	mb();
+
+	/* Access configuration space.  */
+	*(vuip)addr = value;
+	mb();
+	mb();  /* magic */
+	mcheck_expected(0) = 0;
+	mb();
+
+#if 1
+	/*
+	 * david.rusling@reo.mts.dec.com.  This code is needed for the
+	 * EB64+ as it does not generate a machine check (why I don't
+	 * know).  When we build kernels for one particular platform
+	 * then we can make this conditional on the type.
+	 */
+	draina();
+
+	/* Now look for any errors.  */
+	stat0 = *(vuip)APECS_IOC_DCSR;
+
+	/* Is any error bit set? */
+	if (stat0 & 0xffe0U) {
+		/* If not NDEV, print status.  */
+		if (!(stat0 & 0x0800)) {
+			printk("apecs.c:conf_write: got stat0=%x\n", stat0);
+		}
+
+		/* Reset error status.  */
+		*(vuip)APECS_IOC_DCSR = stat0;
+		mb();
+		wrmces(0x7);			/* reset machine check */
+	}
+#endif
+
+	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
+	if (type1) {
+		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
+		mb();
+	}
+	local_irq_restore(flags);
+}
+
+static int
+apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		  int size, u32 *value)
+{
+	unsigned long addr, pci_addr;
+	unsigned char type1;
+	long mask;
+	int shift;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	shift = (where & 3) * 8;
+	addr = (pci_addr << 5) + mask + APECS_CONF;
+	*value = conf_read(addr, type1) >> (shift);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		   int size, u32 value)
+{
+	unsigned long addr, pci_addr;
+	unsigned char type1;
+	long mask;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	addr = (pci_addr << 5) + mask + APECS_CONF;
+	conf_write(addr, value << ((where & 3) * 8), type1);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops apecs_pci_ops = 
+{
+	.read =		apecs_read_config,
+	.write =	apecs_write_config,
+};
+
+void
+apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	wmb();
+	*(vip)APECS_IOC_TBIA = 0;
+	mb();
+}
+
+void __init
+apecs_init_arch(void)
+{
+	struct pci_controller *hose;
+
+	/*
+	 * Create our single hose.
+	 */
+
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hose->mem_space = &iomem_resource;
+	hose->index = 0;
+
+	hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
+	hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
+	hose->sparse_io_base = APECS_IO - IDENT_ADDR;
+	hose->dense_io_base = 0;
+
+	/*
+	 * Set up the PCI to main memory translation windows.
+	 *
+	 * Window 1 is direct access 1GB at 1GB
+	 * Window 2 is scatter-gather 8MB at 8MB (for isa)
+	 */
+	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
+				       SMP_CACHE_BYTES);
+	hose->sg_pci = NULL;
+	__direct_map_base = 0x40000000;
+	__direct_map_size = 0x40000000;
+
+	*(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
+	*(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
+	*(vuip)APECS_IOC_TB1R = 0;
+
+	*(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
+	*(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
+	*(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
+
+	apecs_pci_tbi(hose, 0, -1);
+
+	/*
+	 * Finally, clear the HAXR2 register, which gets used
+	 * for PCI Config Space accesses. That is the way
+	 * we want to use it, and we do not want to depend on
+	 * what ARC or SRM might have left behind...
+	 */
+	*(vuip)APECS_IOC_HAXR2 = 0;
+	mb();
+}
+
+void
+apecs_pci_clr_err(void)
+{
+	unsigned int jd;
+
+	jd = *(vuip)APECS_IOC_DCSR;
+	if (jd & 0xffe0L) {
+		*(vuip)APECS_IOC_SEAR;
+		*(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
+		mb();
+		*(vuip)APECS_IOC_DCSR;
+	}
+	*(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
+	mb();
+	*(vuip)APECS_IOC_TBIA;
+}
+
+void
+apecs_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	struct el_common *mchk_header;
+	struct el_apecs_procdata *mchk_procdata;
+	struct el_apecs_sysdata_mcheck *mchk_sysdata;
+
+	mchk_header = (struct el_common *)la_ptr;
+
+	mchk_procdata = (struct el_apecs_procdata *)
+		(la_ptr + mchk_header->proc_offset
+		 - sizeof(mchk_procdata->paltemp));
+
+	mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
+		(la_ptr + mchk_header->sys_offset);
+
+
+	/* Clear the error before any reporting.  */
+	mb();
+	mb(); /* magic */
+	draina();
+	apecs_pci_clr_err();
+	wrmces(0x7);		/* reset machine check pending flag */
+	mb();
+
+	process_mcheck_info(vector, la_ptr, "APECS",
+			    (mcheck_expected(0)
+			     && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
+}
diff --git a/arch/alpha/kernel/core_cia.c b/arch/alpha/kernel/core_cia.c
new file mode 100644
index 0000000000..12926e9538
--- /dev/null
+++ b/arch/alpha/kernel/core_cia.c
@@ -0,0 +1,1216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_cia.c
+ *
+ * Written by David A Rusling (david.rusling@reo.mts.dec.com).
+ * December 1995.
+ *
+ *	Copyright (C) 1995  David A Rusling
+ *	Copyright (C) 1997, 1998  Jay Estabrook
+ *	Copyright (C) 1998, 1999, 2000  Richard Henderson
+ *
+ * Code common to all CIA core logic chips.
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_cia.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+
+#include <asm/ptrace.h>
+#include <asm/mce.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+
+/*
+ * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
+ * One plausible explanation is that the i/o controller does not properly
+ * handle the system transaction.  Another involves timing.  Ho hum.
+ */
+
+#define DEBUG_CONFIG 0
+#if DEBUG_CONFIG
+# define DBGC(args)	printk args
+#else
+# define DBGC(args)
+#endif
+
+#define vip	volatile int  *
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address.  It is therefore not safe to have
+ * concurrent invocations to configuration space access routines, but
+ * there really shouldn't be any need for this.
+ *
+ * Type 0:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:11	Device select bit.
+ * 	10:8	Function number
+ * 	 7:2	Register number
+ *
+ * Type 1:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:24	reserved
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *bus_dev, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, unsigned char *type1)
+{
+	u8 bus = bus_dev->number;
+
+	*type1 = (bus != 0);
+	*pci_addr = (bus << 16) | (device_fn << 8) | where;
+
+	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
+	      " returning address 0x%p\n"
+	      bus, device_fn, where, *pci_addr));
+
+	return 0;
+}
+
+static unsigned int
+conf_read(unsigned long addr, unsigned char type1)
+{
+	unsigned long flags;
+	int stat0, value;
+	int cia_cfg = 0;
+
+	DBGC(("conf_read(addr=0x%lx, type1=%d) ", addr, type1));
+	local_irq_save(flags);
+
+	/* Reset status register to avoid losing errors.  */
+	stat0 = *(vip)CIA_IOC_CIA_ERR;
+	*(vip)CIA_IOC_CIA_ERR = stat0;
+	mb();
+	*(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
+
+	/* If Type1 access, must set CIA CFG. */
+	if (type1) {
+		cia_cfg = *(vip)CIA_IOC_CFG;
+		*(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
+		mb();
+		*(vip)CIA_IOC_CFG;
+	}
+
+	mb();
+	draina();
+	mcheck_expected(0) = 1;
+	mcheck_taken(0) = 0;
+	mb();
+
+	/* Access configuration space.  */
+	value = *(vip)addr;
+	mb();
+	mb();  /* magic */
+	if (mcheck_taken(0)) {
+		mcheck_taken(0) = 0;
+		value = 0xffffffff;
+		mb();
+	}
+	mcheck_expected(0) = 0;
+	mb();
+
+	/* If Type1 access, must reset IOC CFG so normal IO space ops work.  */
+	if (type1) {
+		*(vip)CIA_IOC_CFG = cia_cfg;
+		mb();
+		*(vip)CIA_IOC_CFG;
+	}
+
+	local_irq_restore(flags);
+	DBGC(("done\n"));
+
+	return value;
+}
+
+static void
+conf_write(unsigned long addr, unsigned int value, unsigned char type1)
+{
+	unsigned long flags;
+	int stat0, cia_cfg = 0;
+
+	DBGC(("conf_write(addr=0x%lx, type1=%d) ", addr, type1));
+	local_irq_save(flags);
+
+	/* Reset status register to avoid losing errors.  */
+	stat0 = *(vip)CIA_IOC_CIA_ERR;
+	*(vip)CIA_IOC_CIA_ERR = stat0;
+	mb();
+	*(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
+
+	/* If Type1 access, must set CIA CFG.  */
+	if (type1) {
+		cia_cfg = *(vip)CIA_IOC_CFG;
+		*(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
+		mb();
+		*(vip)CIA_IOC_CFG;
+	}
+
+	mb();
+	draina();
+	mcheck_expected(0) = 1;
+	mcheck_taken(0) = 0;
+	mb();
+
+	/* Access configuration space.  */
+	*(vip)addr = value;
+	mb();
+	*(vip)addr; /* read back to force the write */
+
+	mcheck_expected(0) = 0;
+	mb();
+
+	/* If Type1 access, must reset IOC CFG so normal IO space ops work.  */
+	if (type1) {
+		*(vip)CIA_IOC_CFG = cia_cfg;
+		mb();
+		*(vip)CIA_IOC_CFG;
+	}
+
+	local_irq_restore(flags);
+	DBGC(("done\n"));
+}
+
+static int 
+cia_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+		u32 *value)
+{
+	unsigned long addr, pci_addr;
+	long mask;
+	unsigned char type1;
+	int shift;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	shift = (where & 3) * 8;
+	addr = (pci_addr << 5) + mask + CIA_CONF;
+	*value = conf_read(addr, type1) >> (shift);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int 
+cia_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+		 u32 value)
+{
+	unsigned long addr, pci_addr;
+	long mask;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	addr = (pci_addr << 5) + mask + CIA_CONF;
+	conf_write(addr, value << ((where & 3) * 8), type1);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops cia_pci_ops = 
+{
+	.read = 	cia_read_config,
+	.write =	cia_write_config,
+};
+
+/*
+ * CIA Pass 1 and PYXIS Pass 1 and 2 have a broken scatter-gather tlb.
+ * It cannot be invalidated.  Rather than hard code the pass numbers,
+ * actually try the tbia to see if it works.
+ */
+
+void
+cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	wmb();
+	*(vip)CIA_IOC_PCI_TBIA = 3;	/* Flush all locked and unlocked.  */
+	mb();
+	*(vip)CIA_IOC_PCI_TBIA;
+}
+
+/*
+ * On PYXIS, even if the tbia works, we cannot use it. It effectively locks
+ * the chip (as well as direct write to the tag registers) if there is a
+ * SG DMA operation in progress. This is true at least for PYXIS rev. 1,
+ * so always use the method below.
+ */
+/*
+ * This is the method NT and NetBSD use.
+ *
+ * Allocate mappings, and put the chip into DMA loopback mode to read a
+ * garbage page.  This works by causing TLB misses, causing old entries to
+ * be purged to make room for the new entries coming in for the garbage page.
+ */
+
+#define CIA_BROKEN_TBIA_BASE	0x30000000
+#define CIA_BROKEN_TBIA_SIZE	1024
+
+/* Always called with interrupts disabled */
+void
+cia_pci_tbi_try2(struct pci_controller *hose,
+		 dma_addr_t start, dma_addr_t end)
+{
+	void __iomem *bus_addr;
+	int ctrl;
+
+	/* Put the chip into PCI loopback mode.  */
+	mb();
+	ctrl = *(vip)CIA_IOC_CIA_CTRL;
+	*(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
+	mb();
+	*(vip)CIA_IOC_CIA_CTRL;
+	mb();
+
+	/* Read from PCI dense memory space at TBI_ADDR, skipping 32k on
+	   each read.  This forces SG TLB misses.  NetBSD claims that the
+	   TLB entries are not quite LRU, meaning that we need to read more
+	   times than there are actual tags.  The 2117x docs claim strict
+	   round-robin.  Oh well, we've come this far...  */
+	/* Even better - as seen on the PYXIS rev 1 the TLB tags 0-3 can
+	   be filled by the TLB misses *only once* after being invalidated
+	   (by tbia or direct write). Next misses won't update them even
+	   though the lock bits are cleared. Tags 4-7 are "quite LRU" though,
+	   so use them and read at window 3 base exactly 4 times. Reading
+	   more sometimes makes the chip crazy.  -ink */
+
+	bus_addr = cia_ioremap(CIA_BROKEN_TBIA_BASE, 32768 * 4);
+
+	cia_readl(bus_addr + 0x00000);
+	cia_readl(bus_addr + 0x08000);
+	cia_readl(bus_addr + 0x10000);
+	cia_readl(bus_addr + 0x18000);
+
+	cia_iounmap(bus_addr);
+
+	/* Restore normal PCI operation.  */
+	mb();
+	*(vip)CIA_IOC_CIA_CTRL = ctrl;
+	mb();
+	*(vip)CIA_IOC_CIA_CTRL;
+	mb();
+}
+
+static inline void
+cia_prepare_tbia_workaround(int window)
+{
+	unsigned long *ppte, pte;
+	long i;
+
+	/* Use minimal 1K map. */
+	ppte = memblock_alloc(CIA_BROKEN_TBIA_SIZE, 32768);
+	if (!ppte)
+		panic("%s: Failed to allocate %u bytes align=0x%x\n",
+		      __func__, CIA_BROKEN_TBIA_SIZE, 32768);
+	pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
+
+	for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
+		ppte[i] = pte;
+
+	*(vip)CIA_IOC_PCI_Wn_BASE(window) = CIA_BROKEN_TBIA_BASE | 3;
+	*(vip)CIA_IOC_PCI_Wn_MASK(window)
+	  = (CIA_BROKEN_TBIA_SIZE*1024 - 1) & 0xfff00000;
+	*(vip)CIA_IOC_PCI_Tn_BASE(window) = virt_to_phys(ppte) >> 2;
+}
+
+static void __init
+verify_tb_operation(void)
+{
+	static int page[PAGE_SIZE/4]
+		__attribute__((aligned(PAGE_SIZE)))
+		__initdata = { 0 };
+
+	struct pci_iommu_arena *arena = pci_isa_hose->sg_isa;
+	int ctrl, addr0, tag0, pte0, data0;
+	int temp, use_tbia_try2 = 0;
+	void __iomem *bus_addr;
+
+	/* pyxis -- tbia is broken */
+	if (pci_isa_hose->dense_io_base)
+		use_tbia_try2 = 1;
+
+	/* Put the chip into PCI loopback mode.  */
+	mb();
+	ctrl = *(vip)CIA_IOC_CIA_CTRL;
+	*(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
+	mb();
+	*(vip)CIA_IOC_CIA_CTRL;
+	mb();
+
+	/* Write a valid entry directly into the TLB registers.  */
+
+	addr0 = arena->dma_base;
+	tag0 = addr0 | 1;
+	pte0 = (virt_to_phys(page) >> (PAGE_SHIFT - 1)) | 1;
+
+	*(vip)CIA_IOC_TB_TAGn(0) = tag0;
+	*(vip)CIA_IOC_TB_TAGn(1) = 0;
+	*(vip)CIA_IOC_TB_TAGn(2) = 0;
+	*(vip)CIA_IOC_TB_TAGn(3) = 0;
+	*(vip)CIA_IOC_TB_TAGn(4) = 0;
+	*(vip)CIA_IOC_TB_TAGn(5) = 0;
+	*(vip)CIA_IOC_TB_TAGn(6) = 0;
+	*(vip)CIA_IOC_TB_TAGn(7) = 0;
+	*(vip)CIA_IOC_TBn_PAGEm(0,0) = pte0;
+	*(vip)CIA_IOC_TBn_PAGEm(0,1) = 0;
+	*(vip)CIA_IOC_TBn_PAGEm(0,2) = 0;
+	*(vip)CIA_IOC_TBn_PAGEm(0,3) = 0;
+	mb();
+
+	/* Get a usable bus address */
+	bus_addr = cia_ioremap(addr0, 8*PAGE_SIZE);
+
+	/* First, verify we can read back what we've written.  If
+	   this fails, we can't be sure of any of the other testing
+	   we're going to do, so bail.  */
+	/* ??? Actually, we could do the work with machine checks.
+	   By passing this register update test, we pretty much
+	   guarantee that cia_pci_tbi_try1 works.  If this test
+	   fails, cia_pci_tbi_try2 might still work.  */
+
+	temp = *(vip)CIA_IOC_TB_TAGn(0);
+	if (temp != tag0) {
+		printk("pci: failed tb register update test "
+		       "(tag0 %#x != %#x)\n", temp, tag0);
+		goto failed;
+	}
+	temp = *(vip)CIA_IOC_TB_TAGn(1);
+	if (temp != 0) {
+		printk("pci: failed tb register update test "
+		       "(tag1 %#x != 0)\n", temp);
+		goto failed;
+	}
+	temp = *(vip)CIA_IOC_TBn_PAGEm(0,0);
+	if (temp != pte0) {
+		printk("pci: failed tb register update test "
+		       "(pte0 %#x != %#x)\n", temp, pte0);
+		goto failed;
+	}
+	printk("pci: passed tb register update test\n");
+
+	/* Second, verify we can actually do I/O through this entry.  */
+
+	data0 = 0xdeadbeef;
+	page[0] = data0;
+	mcheck_expected(0) = 1;
+	mcheck_taken(0) = 0;
+	mb();
+	temp = cia_readl(bus_addr);
+	mb();
+	mcheck_expected(0) = 0;
+	mb();
+	if (mcheck_taken(0)) {
+		printk("pci: failed sg loopback i/o read test (mcheck)\n");
+		goto failed;
+	}
+	if (temp != data0) {
+		printk("pci: failed sg loopback i/o read test "
+		       "(%#x != %#x)\n", temp, data0);
+		goto failed;
+	}
+	printk("pci: passed sg loopback i/o read test\n");
+
+	/* Third, try to invalidate the TLB.  */
+
+	if (! use_tbia_try2) {
+		cia_pci_tbi(arena->hose, 0, -1);
+		temp = *(vip)CIA_IOC_TB_TAGn(0);
+		if (temp & 1) {
+			use_tbia_try2 = 1;
+			printk("pci: failed tbia test; workaround available\n");
+		} else {
+			printk("pci: passed tbia test\n");
+		}
+	}
+
+	/* Fourth, verify the TLB snoops the EV5's caches when
+	   doing a tlb fill.  */
+
+	data0 = 0x5adda15e;
+	page[0] = data0;
+	arena->ptes[4] = pte0;
+	mcheck_expected(0) = 1;
+	mcheck_taken(0) = 0;
+	mb();
+	temp = cia_readl(bus_addr + 4*PAGE_SIZE);
+	mb();
+	mcheck_expected(0) = 0;
+	mb();
+	if (mcheck_taken(0)) {
+		printk("pci: failed pte write cache snoop test (mcheck)\n");
+		goto failed;
+	}
+	if (temp != data0) {
+		printk("pci: failed pte write cache snoop test "
+		       "(%#x != %#x)\n", temp, data0);
+		goto failed;
+	}
+	printk("pci: passed pte write cache snoop test\n");
+
+	/* Fifth, verify that a previously invalid PTE entry gets
+	   filled from the page table.  */
+
+	data0 = 0xabcdef12;
+	page[0] = data0;
+	arena->ptes[5] = pte0;
+	mcheck_expected(0) = 1;
+	mcheck_taken(0) = 0;
+	mb();
+	temp = cia_readl(bus_addr + 5*PAGE_SIZE);
+	mb();
+	mcheck_expected(0) = 0;
+	mb();
+	if (mcheck_taken(0)) {
+		printk("pci: failed valid tag invalid pte reload test "
+		       "(mcheck; workaround available)\n");
+		/* Work around this bug by aligning new allocations
+		   on 4 page boundaries.  */
+		arena->align_entry = 4;
+	} else if (temp != data0) {
+		printk("pci: failed valid tag invalid pte reload test "
+		       "(%#x != %#x)\n", temp, data0);
+		goto failed;
+	} else {
+		printk("pci: passed valid tag invalid pte reload test\n");
+	}
+
+	/* Sixth, verify machine checks are working.  Test invalid
+	   pte under the same valid tag as we used above.  */
+
+	mcheck_expected(0) = 1;
+	mcheck_taken(0) = 0;
+	mb();
+	temp = cia_readl(bus_addr + 6*PAGE_SIZE);
+	mb();
+	mcheck_expected(0) = 0;
+	mb();
+	printk("pci: %s pci machine check test\n",
+	       mcheck_taken(0) ? "passed" : "failed");
+
+	/* Clean up after the tests.  */
+	arena->ptes[4] = 0;
+	arena->ptes[5] = 0;
+
+	if (use_tbia_try2) {
+		alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
+
+		/* Tags 0-3 must be disabled if we use this workaround. */
+		wmb();
+		*(vip)CIA_IOC_TB_TAGn(0) = 2;
+		*(vip)CIA_IOC_TB_TAGn(1) = 2;
+		*(vip)CIA_IOC_TB_TAGn(2) = 2;
+		*(vip)CIA_IOC_TB_TAGn(3) = 2;
+
+		printk("pci: tbia workaround enabled\n");
+	}
+	alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
+
+exit:
+	/* unmap the bus addr */
+	cia_iounmap(bus_addr);
+
+	/* Restore normal PCI operation.  */
+	mb();
+	*(vip)CIA_IOC_CIA_CTRL = ctrl;
+	mb();
+	*(vip)CIA_IOC_CIA_CTRL;
+	mb();
+	return;
+
+failed:
+	printk("pci: disabling sg translation window\n");
+	*(vip)CIA_IOC_PCI_W0_BASE = 0;
+	*(vip)CIA_IOC_PCI_W1_BASE = 0;
+	pci_isa_hose->sg_isa = NULL;
+	alpha_mv.mv_pci_tbi = NULL;
+	goto exit;
+}
+
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+/* Save CIA configuration data as the console had it set up.  */
+struct 
+{
+    unsigned int hae_mem;
+    unsigned int hae_io;
+    unsigned int pci_dac_offset;
+    unsigned int err_mask;
+    unsigned int cia_ctrl;
+    unsigned int cia_cnfg;
+    struct {
+	unsigned int w_base;
+	unsigned int w_mask;
+	unsigned int t_base;
+    } window[4];
+} saved_config __attribute((common));
+
+void
+cia_save_srm_settings(int is_pyxis)
+{
+	int i;
+
+	/* Save some important registers. */
+	saved_config.err_mask       = *(vip)CIA_IOC_ERR_MASK;
+	saved_config.cia_ctrl       = *(vip)CIA_IOC_CIA_CTRL;
+	saved_config.hae_mem        = *(vip)CIA_IOC_HAE_MEM;
+	saved_config.hae_io         = *(vip)CIA_IOC_HAE_IO;
+	saved_config.pci_dac_offset = *(vip)CIA_IOC_PCI_W_DAC;
+
+	if (is_pyxis)
+	    saved_config.cia_cnfg   = *(vip)CIA_IOC_CIA_CNFG;
+	else
+	    saved_config.cia_cnfg   = 0;
+
+	/* Save DMA windows configuration. */
+	for (i = 0; i < 4; i++) {
+	    saved_config.window[i].w_base = *(vip)CIA_IOC_PCI_Wn_BASE(i);
+	    saved_config.window[i].w_mask = *(vip)CIA_IOC_PCI_Wn_MASK(i);
+	    saved_config.window[i].t_base = *(vip)CIA_IOC_PCI_Tn_BASE(i);
+	}
+	mb();
+}
+
+void
+cia_restore_srm_settings(void)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+	    *(vip)CIA_IOC_PCI_Wn_BASE(i) = saved_config.window[i].w_base;
+	    *(vip)CIA_IOC_PCI_Wn_MASK(i) = saved_config.window[i].w_mask;
+	    *(vip)CIA_IOC_PCI_Tn_BASE(i) = saved_config.window[i].t_base;
+	}
+
+	*(vip)CIA_IOC_HAE_MEM   = saved_config.hae_mem;
+	*(vip)CIA_IOC_HAE_IO    = saved_config.hae_io;
+	*(vip)CIA_IOC_PCI_W_DAC = saved_config.pci_dac_offset;	
+	*(vip)CIA_IOC_ERR_MASK  = saved_config.err_mask;
+	*(vip)CIA_IOC_CIA_CTRL  = saved_config.cia_ctrl;
+
+	if (saved_config.cia_cnfg) /* Must be pyxis. */
+	    *(vip)CIA_IOC_CIA_CNFG  = saved_config.cia_cnfg;
+
+	mb();
+}
+#else /* ALPHA_RESTORE_SRM_SETUP */
+#define cia_save_srm_settings(p)	do {} while (0)
+#define cia_restore_srm_settings()	do {} while (0)
+#endif /* ALPHA_RESTORE_SRM_SETUP */
+
+
+static void __init
+do_init_arch(int is_pyxis)
+{
+	struct pci_controller *hose;
+	int temp, cia_rev, tbia_window;
+
+	cia_rev = *(vip)CIA_IOC_CIA_REV & CIA_REV_MASK;
+	printk("pci: cia revision %d%s\n",
+	       cia_rev, is_pyxis ? " (pyxis)" : "");
+
+	if (alpha_using_srm)
+		cia_save_srm_settings(is_pyxis);
+
+	/* Set up error reporting.  */
+	temp = *(vip)CIA_IOC_ERR_MASK;
+	temp &= ~(CIA_ERR_CPU_PE | CIA_ERR_MEM_NEM | CIA_ERR_PA_PTE_INV
+		  | CIA_ERR_RCVD_MAS_ABT | CIA_ERR_RCVD_TAR_ABT);
+	*(vip)CIA_IOC_ERR_MASK = temp;
+
+	/* Clear all currently pending errors.  */
+	temp = *(vip)CIA_IOC_CIA_ERR;
+	*(vip)CIA_IOC_CIA_ERR = temp;
+
+	/* Turn on mchecks.  */
+	temp = *(vip)CIA_IOC_CIA_CTRL;
+	temp |= CIA_CTRL_FILL_ERR_EN | CIA_CTRL_MCHK_ERR_EN;
+	*(vip)CIA_IOC_CIA_CTRL = temp;
+
+	/* Clear the CFG register, which gets used for PCI config space
+	   accesses.  That is the way we want to use it, and we do not
+	   want to depend on what ARC or SRM might have left behind.  */
+	*(vip)CIA_IOC_CFG = 0;
+ 
+	/* Zero the HAEs.  */
+	*(vip)CIA_IOC_HAE_MEM = 0;
+	*(vip)CIA_IOC_HAE_IO = 0;
+
+	/* For PYXIS, we always use BWX bus and i/o accesses.  To that end,
+	   make sure they're enabled on the controller.  At the same time,
+	   enable the monster window.  */
+	if (is_pyxis) {
+		temp = *(vip)CIA_IOC_CIA_CNFG;
+		temp |= CIA_CNFG_IOA_BWEN | CIA_CNFG_PCI_MWEN;
+		*(vip)CIA_IOC_CIA_CNFG = temp;
+	}
+
+	/* Synchronize with all previous changes.  */
+	mb();
+	*(vip)CIA_IOC_CIA_REV;
+
+	/*
+	 * Create our single hose.
+	 */
+
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hose->mem_space = &iomem_resource;
+	hose->index = 0;
+
+	if (! is_pyxis) {
+		struct resource *hae_mem = alloc_resource();
+		hose->mem_space = hae_mem;
+
+		hae_mem->start = 0;
+		hae_mem->end = CIA_MEM_R1_MASK;
+		hae_mem->name = pci_hae0_name;
+		hae_mem->flags = IORESOURCE_MEM;
+
+		if (request_resource(&iomem_resource, hae_mem) < 0)
+			printk(KERN_ERR "Failed to request HAE_MEM\n");
+
+		hose->sparse_mem_base = CIA_SPARSE_MEM - IDENT_ADDR;
+		hose->dense_mem_base = CIA_DENSE_MEM - IDENT_ADDR;
+		hose->sparse_io_base = CIA_IO - IDENT_ADDR;
+		hose->dense_io_base = 0;
+	} else {
+		hose->sparse_mem_base = 0;
+		hose->dense_mem_base = CIA_BW_MEM - IDENT_ADDR;
+		hose->sparse_io_base = 0;
+		hose->dense_io_base = CIA_BW_IO - IDENT_ADDR;
+	}
+
+	/*
+	 * Set up the PCI to main memory translation windows.
+	 *
+	 * Window 0 is S/G 8MB at 8MB (for isa)
+	 * Window 1 is S/G 1MB at 768MB (for tbia) (unused for CIA rev 1)
+	 * Window 2 is direct access 2GB at 2GB
+	 * Window 3 is DAC access 4GB at 8GB (or S/G for tbia if CIA rev 1)
+	 *
+	 * ??? NetBSD hints that page tables must be aligned to 32K,
+	 * possibly due to a hardware bug.  This is over-aligned
+	 * from the 8K alignment one would expect for an 8MB window. 
+	 * No description of what revisions affected.
+	 */
+
+	hose->sg_pci = NULL;
+	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 32768);
+
+	__direct_map_base = 0x80000000;
+	__direct_map_size = 0x80000000;
+
+	*(vip)CIA_IOC_PCI_W0_BASE = hose->sg_isa->dma_base | 3;
+	*(vip)CIA_IOC_PCI_W0_MASK = (hose->sg_isa->size - 1) & 0xfff00000;
+	*(vip)CIA_IOC_PCI_T0_BASE = virt_to_phys(hose->sg_isa->ptes) >> 2;
+
+	*(vip)CIA_IOC_PCI_W2_BASE = __direct_map_base | 1;
+	*(vip)CIA_IOC_PCI_W2_MASK = (__direct_map_size - 1) & 0xfff00000;
+	*(vip)CIA_IOC_PCI_T2_BASE = 0 >> 2;
+
+	/* On PYXIS we have the monster window, selected by bit 40, so
+	   there is no need for window3 to be enabled.
+
+	   On CIA, we don't have true arbitrary addressing -- bits <39:32>
+	   are compared against W_DAC.  We can, however, directly map 4GB,
+	   which is better than before.  However, due to assumptions made
+	   elsewhere, we should not claim that we support DAC unless that
+	   4GB covers all of physical memory.
+
+	   On CIA rev 1, apparently W1 and W2 can't be used for SG. 
+	   At least, there are reports that it doesn't work for Alcor. 
+	   In that case, we have no choice but to use W3 for the TBIA 
+	   workaround, which means we can't use DAC at all. */ 
+
+	tbia_window = 1;
+	if (is_pyxis) {
+		*(vip)CIA_IOC_PCI_W3_BASE = 0;
+	} else if (cia_rev == 1) {
+		*(vip)CIA_IOC_PCI_W1_BASE = 0;
+		tbia_window = 3;
+	} else if (max_low_pfn > (0x100000000UL >> PAGE_SHIFT)) {
+		*(vip)CIA_IOC_PCI_W3_BASE = 0;
+	} else {
+		*(vip)CIA_IOC_PCI_W3_BASE = 0x00000000 | 1 | 8;
+		*(vip)CIA_IOC_PCI_W3_MASK = 0xfff00000;
+		*(vip)CIA_IOC_PCI_T3_BASE = 0 >> 2;
+
+		alpha_mv.pci_dac_offset = 0x200000000UL;
+		*(vip)CIA_IOC_PCI_W_DAC = alpha_mv.pci_dac_offset >> 32;
+	}
+
+	/* Prepare workaround for apparently broken tbia. */
+	cia_prepare_tbia_workaround(tbia_window);
+}
+
+void __init
+cia_init_arch(void)
+{
+	do_init_arch(0);
+}
+
+void __init
+pyxis_init_arch(void)
+{
+	/* On pyxis machines we can precisely calculate the
+	   CPU clock frequency using pyxis real time counter.
+	   It's especially useful for SX164 with broken RTC.
+
+	   Both CPU and chipset are driven by the single 16.666M
+	   or 16.667M crystal oscillator. PYXIS_RT_COUNT clock is
+	   66.66 MHz. -ink */
+
+	unsigned int cc0, cc1;
+	unsigned long pyxis_cc;
+
+	__asm__ __volatile__ ("rpcc %0" : "=r"(cc0));
+	pyxis_cc = *(vulp)PYXIS_RT_COUNT;
+	do { } while(*(vulp)PYXIS_RT_COUNT - pyxis_cc < 4096);
+	__asm__ __volatile__ ("rpcc %0" : "=r"(cc1));
+	cc1 -= cc0;
+	hwrpb->cycle_freq = ((cc1 >> 11) * 100000000UL) / 3;
+	hwrpb_update_checksum(hwrpb);
+
+	do_init_arch(1);
+}
+
+void
+cia_kill_arch(int mode)
+{
+	if (alpha_using_srm)
+		cia_restore_srm_settings();
+}
+
+void __init
+cia_init_pci(void)
+{
+	/* Must delay this from init_arch, as we need machine checks.  */
+	verify_tb_operation();
+	common_init_pci();
+}
+
+static inline void
+cia_pci_clr_err(void)
+{
+	int jd;
+
+	jd = *(vip)CIA_IOC_CIA_ERR;
+	*(vip)CIA_IOC_CIA_ERR = jd;
+	mb();
+	*(vip)CIA_IOC_CIA_ERR;		/* re-read to force write.  */
+}
+
+#ifdef CONFIG_VERBOSE_MCHECK
+static void
+cia_decode_pci_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
+{
+	static const char * const pci_cmd_desc[16] = {
+		"Interrupt Acknowledge", "Special Cycle", "I/O Read",
+		"I/O Write", "Reserved 0x4", "Reserved 0x5", "Memory Read",
+		"Memory Write", "Reserved 0x8", "Reserved 0x9",
+		"Configuration Read", "Configuration Write",
+		"Memory Read Multiple", "Dual Address Cycle",
+		"Memory Read Line", "Memory Write and Invalidate"
+	};
+
+	if (cia->cia_err & (CIA_ERR_COR_ERR
+			    | CIA_ERR_UN_COR_ERR
+			    | CIA_ERR_MEM_NEM
+			    | CIA_ERR_PA_PTE_INV)) {
+		static const char * const window_desc[6] = {
+			"No window active", "Window 0 hit", "Window 1 hit",
+			"Window 2 hit", "Window 3 hit", "Monster window hit"
+		};
+
+		const char *window;
+		const char *cmd;
+		unsigned long addr, tmp;
+		int lock, dac;
+	
+		cmd = pci_cmd_desc[cia->pci_err0 & 0x7];
+		lock = (cia->pci_err0 >> 4) & 1;
+		dac = (cia->pci_err0 >> 5) & 1;
+
+		tmp = (cia->pci_err0 >> 8) & 0x1F;
+		tmp = ffs(tmp);
+		window = window_desc[tmp];
+
+		addr = cia->pci_err1;
+		if (dac) {
+			tmp = *(vip)CIA_IOC_PCI_W_DAC & 0xFFUL;
+			addr |= tmp << 32;
+		}
+
+		printk(KERN_CRIT "CIA machine check: %s\n", msg);
+		printk(KERN_CRIT "  DMA command: %s\n", cmd);
+		printk(KERN_CRIT "  PCI address: %#010lx\n", addr);
+		printk(KERN_CRIT "  %s, Lock: %d, DAC: %d\n",
+		       window, lock, dac);
+	} else if (cia->cia_err & (CIA_ERR_PERR
+				   | CIA_ERR_PCI_ADDR_PE
+				   | CIA_ERR_RCVD_MAS_ABT
+				   | CIA_ERR_RCVD_TAR_ABT
+				   | CIA_ERR_IOA_TIMEOUT)) {
+		static const char * const master_st_desc[16] = {
+			"Idle", "Drive bus", "Address step cycle",
+			"Address cycle", "Data cycle", "Last read data cycle",
+			"Last write data cycle", "Read stop cycle",
+			"Write stop cycle", "Read turnaround cycle",
+			"Write turnaround cycle", "Reserved 0xB",
+			"Reserved 0xC", "Reserved 0xD", "Reserved 0xE",
+			"Unknown state"
+		};
+		static const char * const target_st_desc[16] = {
+			"Idle", "Busy", "Read data cycle", "Write data cycle",
+			"Read stop cycle", "Write stop cycle",
+			"Read turnaround cycle", "Write turnaround cycle",
+			"Read wait cycle", "Write wait cycle",
+			"Reserved 0xA", "Reserved 0xB", "Reserved 0xC",
+			"Reserved 0xD", "Reserved 0xE", "Unknown state"
+		};
+
+		const char *cmd;
+		const char *master, *target;
+		unsigned long addr, tmp;
+		int dac;
+
+		master = master_st_desc[(cia->pci_err0 >> 16) & 0xF];
+		target = target_st_desc[(cia->pci_err0 >> 20) & 0xF];
+		cmd = pci_cmd_desc[(cia->pci_err0 >> 24) & 0xF];
+		dac = (cia->pci_err0 >> 28) & 1;
+
+		addr = cia->pci_err2;
+		if (dac) {
+			tmp = *(volatile int *)CIA_IOC_PCI_W_DAC & 0xFFUL;
+			addr |= tmp << 32;
+		}
+
+		printk(KERN_CRIT "CIA machine check: %s\n", msg);
+		printk(KERN_CRIT "  PCI command: %s\n", cmd);
+		printk(KERN_CRIT "  Master state: %s, Target state: %s\n",
+		       master, target);
+		printk(KERN_CRIT "  PCI address: %#010lx, DAC: %d\n",
+		       addr, dac);
+	} else {
+		printk(KERN_CRIT "CIA machine check: %s\n", msg);
+		printk(KERN_CRIT "  Unknown PCI error\n");
+		printk(KERN_CRIT "  PCI_ERR0 = %#08lx", cia->pci_err0);
+		printk(KERN_CRIT "  PCI_ERR1 = %#08lx", cia->pci_err1);
+		printk(KERN_CRIT "  PCI_ERR2 = %#08lx", cia->pci_err2);
+	}
+}
+
+static void
+cia_decode_mem_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
+{
+	unsigned long mem_port_addr;
+	unsigned long mem_port_mask;
+	const char *mem_port_cmd;
+	const char *seq_state;
+	const char *set_select;
+	unsigned long tmp;
+
+	/* If this is a DMA command, also decode the PCI bits.  */
+	if ((cia->mem_err1 >> 20) & 1)
+		cia_decode_pci_error(cia, msg);
+	else
+		printk(KERN_CRIT "CIA machine check: %s\n", msg);
+
+	mem_port_addr = cia->mem_err0 & 0xfffffff0;
+	mem_port_addr |= (cia->mem_err1 & 0x83UL) << 32;
+
+	mem_port_mask = (cia->mem_err1 >> 12) & 0xF;
+
+	tmp = (cia->mem_err1 >> 8) & 0xF;
+	tmp |= ((cia->mem_err1 >> 20) & 1) << 4;
+	if ((tmp & 0x1E) == 0x06)
+		mem_port_cmd = "WRITE BLOCK or WRITE BLOCK LOCK";
+	else if ((tmp & 0x1C) == 0x08)
+		mem_port_cmd = "READ MISS or READ MISS MODIFY";
+	else if (tmp == 0x1C)
+		mem_port_cmd = "BC VICTIM";
+	else if ((tmp & 0x1E) == 0x0E)
+		mem_port_cmd = "READ MISS MODIFY";
+	else if ((tmp & 0x1C) == 0x18)
+		mem_port_cmd = "DMA READ or DMA READ MODIFY";
+	else if ((tmp & 0x1E) == 0x12)
+		mem_port_cmd = "DMA WRITE";
+	else
+		mem_port_cmd = "Unknown";
+
+	tmp = (cia->mem_err1 >> 16) & 0xF;
+	switch (tmp) {
+	case 0x0:
+		seq_state = "Idle";
+		break;
+	case 0x1:
+		seq_state = "DMA READ or DMA WRITE";
+		break;
+	case 0x2: case 0x3:
+		seq_state = "READ MISS (or READ MISS MODIFY) with victim";
+		break;
+	case 0x4: case 0x5: case 0x6:
+		seq_state = "READ MISS (or READ MISS MODIFY) with no victim";
+		break;
+	case 0x8: case 0x9: case 0xB:
+		seq_state = "Refresh";
+		break;
+	case 0xC:
+		seq_state = "Idle, waiting for DMA pending read";
+		break;
+	case 0xE: case 0xF:
+		seq_state = "Idle, ras precharge";
+		break;
+	default:
+		seq_state = "Unknown";
+		break;
+	}
+
+	tmp = (cia->mem_err1 >> 24) & 0x1F;
+	switch (tmp) {
+	case 0x00: set_select = "Set 0 selected"; break;
+	case 0x01: set_select = "Set 1 selected"; break;
+	case 0x02: set_select = "Set 2 selected"; break;
+	case 0x03: set_select = "Set 3 selected"; break;
+	case 0x04: set_select = "Set 4 selected"; break;
+	case 0x05: set_select = "Set 5 selected"; break;
+	case 0x06: set_select = "Set 6 selected"; break;
+	case 0x07: set_select = "Set 7 selected"; break;
+	case 0x08: set_select = "Set 8 selected"; break;
+	case 0x09: set_select = "Set 9 selected"; break;
+	case 0x0A: set_select = "Set A selected"; break;
+	case 0x0B: set_select = "Set B selected"; break;
+	case 0x0C: set_select = "Set C selected"; break;
+	case 0x0D: set_select = "Set D selected"; break;
+	case 0x0E: set_select = "Set E selected"; break;
+	case 0x0F: set_select = "Set F selected"; break;
+	case 0x10: set_select = "No set selected"; break;
+	case 0x1F: set_select = "Refresh cycle"; break;
+	default:   set_select = "Unknown"; break;
+	}
+
+	printk(KERN_CRIT "  Memory port command: %s\n", mem_port_cmd);
+	printk(KERN_CRIT "  Memory port address: %#010lx, mask: %#lx\n",
+	       mem_port_addr, mem_port_mask);
+	printk(KERN_CRIT "  Memory sequencer state: %s\n", seq_state);
+	printk(KERN_CRIT "  Memory set: %s\n", set_select);
+}
+
+static void
+cia_decode_ecc_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
+{
+	long syn;
+	long i;
+	const char *fmt;
+
+	cia_decode_mem_error(cia, msg);
+
+	syn = cia->cia_syn & 0xff;
+	if (syn == (syn & -syn)) {
+		fmt = KERN_CRIT "  ECC syndrome %#x -- check bit %d\n";
+		i = ffs(syn) - 1;
+	} else {
+		static unsigned char const data_bit[64] = {
+			0xCE, 0xCB, 0xD3, 0xD5,
+			0xD6, 0xD9, 0xDA, 0xDC,
+			0x23, 0x25, 0x26, 0x29,
+			0x2A, 0x2C, 0x31, 0x34,
+			0x0E, 0x0B, 0x13, 0x15,
+			0x16, 0x19, 0x1A, 0x1C,
+			0xE3, 0xE5, 0xE6, 0xE9,
+			0xEA, 0xEC, 0xF1, 0xF4,
+			0x4F, 0x4A, 0x52, 0x54,
+			0x57, 0x58, 0x5B, 0x5D,
+			0xA2, 0xA4, 0xA7, 0xA8,
+			0xAB, 0xAD, 0xB0, 0xB5,
+			0x8F, 0x8A, 0x92, 0x94,
+			0x97, 0x98, 0x9B, 0x9D,
+			0x62, 0x64, 0x67, 0x68,
+			0x6B, 0x6D, 0x70, 0x75
+		};
+
+		for (i = 0; i < 64; ++i)
+			if (data_bit[i] == syn)
+				break;
+
+		if (i < 64)
+			fmt = KERN_CRIT "  ECC syndrome %#x -- data bit %d\n";
+		else
+			fmt = KERN_CRIT "  ECC syndrome %#x -- unknown bit\n";
+	}
+
+	printk (fmt, syn, i);
+}
+
+static void
+cia_decode_parity_error(struct el_CIA_sysdata_mcheck *cia)
+{
+	static const char * const cmd_desc[16] = {
+		"NOP", "LOCK", "FETCH", "FETCH_M", "MEMORY BARRIER",
+		"SET DIRTY", "WRITE BLOCK", "WRITE BLOCK LOCK",
+		"READ MISS0", "READ MISS1", "READ MISS MOD0",
+		"READ MISS MOD1", "BCACHE VICTIM", "Spare",
+		"READ MISS MOD STC0", "READ MISS MOD STC1"
+	};
+
+	unsigned long addr;
+	unsigned long mask;
+	const char *cmd;
+	int par;
+
+	addr = cia->cpu_err0 & 0xfffffff0;
+	addr |= (cia->cpu_err1 & 0x83UL) << 32;
+	cmd = cmd_desc[(cia->cpu_err1 >> 8) & 0xF];
+	mask = (cia->cpu_err1 >> 12) & 0xF;
+	par = (cia->cpu_err1 >> 21) & 1;
+
+	printk(KERN_CRIT "CIA machine check: System bus parity error\n");
+	printk(KERN_CRIT "  Command: %s, Parity bit: %d\n", cmd, par);
+	printk(KERN_CRIT "  Address: %#010lx, Mask: %#lx\n", addr, mask);
+}
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+
+static int
+cia_decode_mchk(unsigned long la_ptr)
+{
+	struct el_common *com;
+	struct el_CIA_sysdata_mcheck *cia;
+
+	com = (void *)la_ptr;
+	cia = (void *)(la_ptr + com->sys_offset);
+
+	if ((cia->cia_err & CIA_ERR_VALID) == 0)
+		return 0;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (!alpha_verbose_mcheck)
+		return 1;
+
+	switch (ffs(cia->cia_err & 0xfff) - 1) {
+	case 0: /* CIA_ERR_COR_ERR */
+		cia_decode_ecc_error(cia, "Corrected ECC error");
+		break;
+	case 1: /* CIA_ERR_UN_COR_ERR */
+		cia_decode_ecc_error(cia, "Uncorrected ECC error");
+		break;
+	case 2: /* CIA_ERR_CPU_PE */
+		cia_decode_parity_error(cia);
+		break;
+	case 3: /* CIA_ERR_MEM_NEM */
+		cia_decode_mem_error(cia, "Access to nonexistent memory");
+		break;
+	case 4: /* CIA_ERR_PCI_SERR */
+		cia_decode_pci_error(cia, "PCI bus system error");
+		break;
+	case 5: /* CIA_ERR_PERR */
+		cia_decode_pci_error(cia, "PCI data parity error");
+		break;
+	case 6: /* CIA_ERR_PCI_ADDR_PE */
+		cia_decode_pci_error(cia, "PCI address parity error");
+		break;
+	case 7: /* CIA_ERR_RCVD_MAS_ABT */
+		cia_decode_pci_error(cia, "PCI master abort");
+		break;
+	case 8: /* CIA_ERR_RCVD_TAR_ABT */
+		cia_decode_pci_error(cia, "PCI target abort");
+		break;
+	case 9: /* CIA_ERR_PA_PTE_INV */
+		cia_decode_pci_error(cia, "PCI invalid PTE");
+		break;
+	case 10: /* CIA_ERR_FROM_WRT_ERR */
+		cia_decode_mem_error(cia, "Write to flash ROM attempted");
+		break;
+	case 11: /* CIA_ERR_IOA_TIMEOUT */
+		cia_decode_pci_error(cia, "I/O timeout");
+		break;
+	}
+
+	if (cia->cia_err & CIA_ERR_LOST_CORR_ERR)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "Correctable ECC error\n");
+	if (cia->cia_err & CIA_ERR_LOST_UN_CORR_ERR)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "Uncorrectable ECC error\n");
+	if (cia->cia_err & CIA_ERR_LOST_CPU_PE)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "System bus parity error\n");
+	if (cia->cia_err & CIA_ERR_LOST_MEM_NEM)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "Access to nonexistent memory\n");
+	if (cia->cia_err & CIA_ERR_LOST_PERR)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "PCI data parity error\n");
+	if (cia->cia_err & CIA_ERR_LOST_PCI_ADDR_PE)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "PCI address parity error\n");
+	if (cia->cia_err & CIA_ERR_LOST_RCVD_MAS_ABT)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "PCI master abort\n");
+	if (cia->cia_err & CIA_ERR_LOST_RCVD_TAR_ABT)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "PCI target abort\n");
+	if (cia->cia_err & CIA_ERR_LOST_PA_PTE_INV)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "PCI invalid PTE\n");
+	if (cia->cia_err & CIA_ERR_LOST_FROM_WRT_ERR)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "Write to flash ROM attempted\n");
+	if (cia->cia_err & CIA_ERR_LOST_IOA_TIMEOUT)
+		printk(KERN_CRIT "CIA lost machine check: "
+		       "I/O timeout\n");
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+	return 1;
+}
+
+void
+cia_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	int expected;
+
+	/* Clear the error before any reporting.  */
+	mb();
+	mb();  /* magic */
+	draina();
+	cia_pci_clr_err();
+	wrmces(rdmces());	/* reset machine check pending flag.  */
+	mb();
+
+	expected = mcheck_expected(0);
+	if (!expected && vector == 0x660)
+		expected = cia_decode_mchk(la_ptr);
+	process_mcheck_info(vector, la_ptr, "CIA", expected);
+}
diff --git a/arch/alpha/kernel/core_irongate.c b/arch/alpha/kernel/core_irongate.c
new file mode 100644
index 0000000000..6b8ed12936
--- /dev/null
+++ b/arch/alpha/kernel/core_irongate.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_irongate.c
+ *
+ * Based on code written by David A. Rusling (david.rusling@reo.mts.dec.com).
+ *
+ *	Copyright (C) 1999 Alpha Processor, Inc.,
+ *		(David Daniel, Stig Telfer, Soohoon Lee)
+ *
+ * Code common to all IRONGATE core logic chips.
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_irongate.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/memblock.h>
+
+#include <asm/ptrace.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG_CFG(args)	printk args
+#else
+# define DBG_CFG(args)
+#endif
+
+igcsr32 *IronECC;
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address accordingly.  It is therefore not safe
+ * to have concurrent invocations to configuration space access
+ * routines, but there really shouldn't be any need for this.
+ *
+ *	addr[31:24]		reserved
+ *	addr[23:16]		bus number (8 bits = 128 possible buses)
+ *	addr[15:11]		Device number (5 bits)
+ *	addr[10: 8]		function number
+ *	addr[ 7: 2]		register number
+ *
+ * For IRONGATE:
+ *    if (bus = addr[23:16]) == 0
+ *    then
+ *	  type 0 config cycle:
+ *	      addr_on_pci[31:11] = id selection for device = addr[15:11]
+ *	      addr_on_pci[10: 2] = addr[10: 2] ???
+ *	      addr_on_pci[ 1: 0] = 00
+ *    else
+ *	  type 1 config cycle (pass on with no decoding):
+ *	      addr_on_pci[31:24] = 0
+ *	      addr_on_pci[23: 2] = addr[23: 2]
+ *	      addr_on_pci[ 1: 0] = 01
+ *    fi
+ *
+ * Notes:
+ *	The function number selects which function of a multi-function device
+ *	(e.g., SCSI and Ethernet).
+ *
+ *	The register selects a DWORD (32 bit) register offset.	Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, unsigned char *type1)
+{
+	unsigned long addr;
+	u8 bus = pbus->number;
+
+	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
+		 "pci_addr=0x%p, type1=0x%p)\n",
+		 bus, device_fn, where, pci_addr, type1));
+
+	*type1 = (bus != 0);
+
+	addr = (bus << 16) | (device_fn << 8) | where;
+	addr |= IRONGATE_CONF;
+
+	*pci_addr = addr;
+	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return 0;
+}
+
+static int
+irongate_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 *value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		*value = __kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		*value = __kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*value = *(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+irongate_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		      int size, u32 value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		__kernel_stb(value, *(vucp)addr);
+		mb();
+		__kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		__kernel_stw(value, *(vusp)addr);
+		mb();
+		__kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*(vuip)addr = value;
+		mb();
+		*(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops irongate_pci_ops =
+{
+	.read =		irongate_read_config,
+	.write =	irongate_write_config,
+};
+
+int
+irongate_pci_clr_err(void)
+{
+	unsigned int nmi_ctl=0;
+	unsigned int IRONGATE_jd;
+
+again:
+	IRONGATE_jd = IRONGATE0->stat_cmd;
+	printk("Iron stat_cmd %x\n", IRONGATE_jd);
+	IRONGATE0->stat_cmd = IRONGATE_jd; /* write again clears error bits */
+	mb();
+	IRONGATE_jd = IRONGATE0->stat_cmd;  /* re-read to force write */
+
+	IRONGATE_jd = *IronECC;
+	printk("Iron ECC %x\n", IRONGATE_jd);
+	*IronECC = IRONGATE_jd; /* write again clears error bits */
+	mb();
+	IRONGATE_jd = *IronECC;  /* re-read to force write */
+
+	/* Clear ALI NMI */
+        nmi_ctl = inb(0x61);
+        nmi_ctl |= 0x0c;
+        outb(nmi_ctl, 0x61);
+        nmi_ctl &= ~0x0c;
+        outb(nmi_ctl, 0x61);
+
+	IRONGATE_jd = *IronECC;
+	if (IRONGATE_jd & 0x300) goto again;
+
+	return 0;
+}
+
+#define IRONGATE_3GB 0xc0000000UL
+
+/* On Albacore (aka UP1500) with 4Gb of RAM we have to reserve some
+   memory for PCI. At this point we just reserve memory above 3Gb. Most
+   of this memory will be freed after PCI setup is done. */
+static void __init
+albacore_init_arch(void)
+{
+	unsigned long memtop = max_low_pfn << PAGE_SHIFT;
+	unsigned long pci_mem = (memtop + 0x1000000UL) & ~0xffffffUL;
+	struct percpu_struct *cpu;
+	int pal_rev, pal_var;
+
+	cpu = (struct percpu_struct*)((char*)hwrpb + hwrpb->processor_offset);
+	pal_rev = cpu->pal_revision & 0xffff;
+	pal_var = (cpu->pal_revision >> 16) & 0xff;
+
+	/* Consoles earlier than A5.6-18 (OSF PALcode v1.62-2) set up
+	   the CPU incorrectly (leave speculative stores enabled),
+	   which causes memory corruption under certain conditions.
+	   Issue a warning for such consoles. */
+	if (alpha_using_srm &&
+	    (pal_rev < 0x13e ||	(pal_rev == 0x13e && pal_var < 2)))
+		printk(KERN_WARNING "WARNING! Upgrade to SRM A5.6-19 "
+				    "or later\n");
+
+	if (pci_mem > IRONGATE_3GB)
+		pci_mem = IRONGATE_3GB;
+	IRONGATE0->pci_mem = pci_mem;
+	alpha_mv.min_mem_address = pci_mem;
+	if (memtop > pci_mem) {
+#ifdef CONFIG_BLK_DEV_INITRD
+		extern unsigned long initrd_start, initrd_end;
+		extern void *move_initrd(unsigned long);
+
+		/* Move the initrd out of the way. */
+		if (initrd_end && __pa(initrd_end) > pci_mem) {
+			unsigned long size;
+
+			size = initrd_end - initrd_start;
+			memblock_free((void *)initrd_start, PAGE_ALIGN(size));
+			if (!move_initrd(pci_mem))
+				printk("irongate_init_arch: initrd too big "
+				       "(%ldK)\ndisabling initrd\n",
+				       size / 1024);
+		}
+#endif
+		memblock_reserve(pci_mem, memtop - pci_mem);
+		printk("irongate_init_arch: temporarily reserving "
+			"region %08lx-%08lx for PCI\n", pci_mem, memtop - 1);
+	}
+}
+
+static void __init
+irongate_setup_agp(void)
+{
+	/* Disable the GART window. AGPGART doesn't work due to yet
+	   unresolved memory coherency issues... */
+	IRONGATE0->agpva = IRONGATE0->agpva & ~0xf;
+	alpha_agpgart_size = 0;
+}
+
+void __init
+irongate_init_arch(void)
+{
+	struct pci_controller *hose;
+	int amd761 = (IRONGATE0->dev_vendor >> 16) > 0x7006;	/* Albacore? */
+
+	IronECC = amd761 ? &IRONGATE0->bacsr54_eccms761 : &IRONGATE0->dramms;
+
+	irongate_pci_clr_err();
+
+	if (amd761)
+		albacore_init_arch();
+
+	irongate_setup_agp();
+
+	/*
+	 * Create our single hose.
+	 */
+
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hose->mem_space = &iomem_resource;
+	hose->index = 0;
+
+	/* This is for userland consumption.  For some reason, the 40-bit
+	   PIO bias that we use in the kernel through KSEG didn't work for
+	   the page table based user mappings.  So make sure we get the
+	   43-bit PIO bias.  */
+	hose->sparse_mem_base = 0;
+	hose->sparse_io_base = 0;
+	hose->dense_mem_base
+	  = (IRONGATE_MEM & 0xffffffffffUL) | 0x80000000000UL;
+	hose->dense_io_base
+	  = (IRONGATE_IO & 0xffffffffffUL) | 0x80000000000UL;
+
+	hose->sg_isa = hose->sg_pci = NULL;
+	__direct_map_base = 0;
+	__direct_map_size = 0xffffffff;
+}
+
+/*
+ * IO map and AGP support
+ */
+#include <linux/vmalloc.h>
+#include <linux/agp_backend.h>
+#include <linux/agpgart.h>
+#include <linux/export.h>
+
+#define GET_PAGE_DIR_OFF(addr) (addr >> 22)
+#define GET_PAGE_DIR_IDX(addr) (GET_PAGE_DIR_OFF(addr))
+
+#define GET_GATT_OFF(addr) ((addr & 0x003ff000) >> 12) 
+#define GET_GATT(addr) (gatt_pages[GET_PAGE_DIR_IDX(addr)])
+
+void __iomem *
+irongate_ioremap(unsigned long addr, unsigned long size)
+{
+	struct vm_struct *area;
+	unsigned long vaddr;
+	unsigned long baddr, last;
+	u32 *mmio_regs, *gatt_pages, *cur_gatt, pte;
+	unsigned long gart_bus_addr;
+
+	if (!alpha_agpgart_size)
+		return (void __iomem *)(addr + IRONGATE_MEM);
+
+	gart_bus_addr = (unsigned long)IRONGATE0->bar0 &
+			PCI_BASE_ADDRESS_MEM_MASK; 
+
+	/* 
+	 * Check for within the AGP aperture...
+	 */
+	do {
+		/*
+		 * Check the AGP area
+		 */
+		if (addr >= gart_bus_addr && addr + size - 1 < 
+		    gart_bus_addr + alpha_agpgart_size)
+			break;
+
+		/*
+		 * Not found - assume legacy ioremap
+		 */
+		return (void __iomem *)(addr + IRONGATE_MEM);
+	} while(0);
+
+	mmio_regs = (u32 *)(((unsigned long)IRONGATE0->bar1 &
+			PCI_BASE_ADDRESS_MEM_MASK) + IRONGATE_MEM);
+
+	gatt_pages = (u32 *)(phys_to_virt(mmio_regs[1])); /* FIXME */
+
+	/*
+	 * Adjust the limits (mappings must be page aligned)
+	 */
+	if (addr & ~PAGE_MASK) {
+		printk("AGP ioremap failed... addr not page aligned (0x%lx)\n",
+		       addr);
+		return (void __iomem *)(addr + IRONGATE_MEM);
+	}
+	last = addr + size - 1;
+	size = PAGE_ALIGN(last) - addr;
+
+#if 0
+	printk("irongate_ioremap(0x%lx, 0x%lx)\n", addr, size);
+	printk("irongate_ioremap:  gart_bus_addr  0x%lx\n", gart_bus_addr);
+	printk("irongate_ioremap:  gart_aper_size 0x%lx\n", gart_aper_size);
+	printk("irongate_ioremap:  mmio_regs      %p\n", mmio_regs);
+	printk("irongate_ioremap:  gatt_pages     %p\n", gatt_pages);
+	
+	for(baddr = addr; baddr <= last; baddr += PAGE_SIZE)
+	{
+		cur_gatt = phys_to_virt(GET_GATT(baddr) & ~1);
+		pte = cur_gatt[GET_GATT_OFF(baddr)] & ~1;
+		printk("irongate_ioremap:  cur_gatt %p pte 0x%x\n",
+		       cur_gatt, pte);
+	}
+#endif
+
+	/*
+	 * Map it
+	 */
+	area = get_vm_area(size, VM_IOREMAP);
+	if (!area) return NULL;
+
+	for(baddr = addr, vaddr = (unsigned long)area->addr; 
+	    baddr <= last; 
+	    baddr += PAGE_SIZE, vaddr += PAGE_SIZE)
+	{
+		cur_gatt = phys_to_virt(GET_GATT(baddr) & ~1);
+		pte = cur_gatt[GET_GATT_OFF(baddr)] & ~1;
+
+		if (__alpha_remap_area_pages(vaddr,
+					     pte, PAGE_SIZE, 0)) {
+			printk("AGP ioremap: FAILED to map...\n");
+			vfree(area->addr);
+			return NULL;
+		}
+	}
+
+	flush_tlb_all();
+
+	vaddr = (unsigned long)area->addr + (addr & ~PAGE_MASK);
+#if 0
+	printk("irongate_ioremap(0x%lx, 0x%lx) returning 0x%lx\n",
+	       addr, size, vaddr);
+#endif
+	return (void __iomem *)vaddr;
+}
+EXPORT_SYMBOL(irongate_ioremap);
+
+void
+irongate_iounmap(volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (((long)addr >> 41) == -2)
+		return;	/* kseg map, nothing to do */
+	if (addr)
+		return vfree((void *)(PAGE_MASK & addr)); 
+}
+EXPORT_SYMBOL(irongate_iounmap);
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
new file mode 100644
index 0000000000..57e0750419
--- /dev/null
+++ b/arch/alpha/kernel/core_lca.c
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_lca.c
+ *
+ * Written by David Mosberger (davidm@cs.arizona.edu) with some code
+ * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
+ * bios code.
+ *
+ * Code common to all LCA core logic chips.
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_lca.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+
+#include <asm/ptrace.h>
+#include <asm/irq_regs.h>
+#include <asm/smp.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+/*
+ * Machine check reasons.  Defined according to PALcode sources
+ * (osf.h and platform.h).
+ */
+#define MCHK_K_TPERR		0x0080
+#define MCHK_K_TCPERR		0x0082
+#define MCHK_K_HERR		0x0084
+#define MCHK_K_ECC_C		0x0086
+#define MCHK_K_ECC_NC		0x0088
+#define MCHK_K_UNKNOWN		0x008A
+#define MCHK_K_CACKSOFT		0x008C
+#define MCHK_K_BUGCHECK		0x008E
+#define MCHK_K_OS_BUGCHECK	0x0090
+#define MCHK_K_DCPERR		0x0092
+#define MCHK_K_ICPERR		0x0094
+
+
+/*
+ * Platform-specific machine-check reasons:
+ */
+#define MCHK_K_SIO_SERR		0x204	/* all platforms so far */
+#define MCHK_K_SIO_IOCHK	0x206	/* all platforms so far */
+#define MCHK_K_DCSR		0x208	/* all but Noname */
+
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address and setup the LCA_IOC_CONF register
+ * accordingly.  It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Type 0:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:11	Device select bit.
+ * 	10:8	Function number
+ * 	 7:2	Register number
+ *
+ * Type 1:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:24	reserved
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr)
+{
+	unsigned long addr;
+	u8 bus = pbus->number;
+
+	if (bus == 0) {
+		int device = device_fn >> 3;
+		int func = device_fn & 0x7;
+
+		/* Type 0 configuration cycle.  */
+
+		if (device > 12) {
+			return -1;
+		}
+
+		*(vulp)LCA_IOC_CONF = 0;
+		addr = (1 << (11 + device)) | (func << 8) | where;
+	} else {
+		/* Type 1 configuration cycle.  */
+		*(vulp)LCA_IOC_CONF = 1;
+		addr = (bus << 16) | (device_fn << 8) | where;
+	}
+	*pci_addr = addr;
+	return 0;
+}
+
+static unsigned int
+conf_read(unsigned long addr)
+{
+	unsigned long flags, code, stat0;
+	unsigned int value;
+
+	local_irq_save(flags);
+
+	/* Reset status register to avoid losing errors.  */
+	stat0 = *(vulp)LCA_IOC_STAT0;
+	*(vulp)LCA_IOC_STAT0 = stat0;
+	mb();
+
+	/* Access configuration space.  */
+	value = *(vuip)addr;
+	draina();
+
+	stat0 = *(vulp)LCA_IOC_STAT0;
+	if (stat0 & LCA_IOC_STAT0_ERR) {
+		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
+			& LCA_IOC_STAT0_CODE_MASK);
+		if (code != 1) {
+			printk("lca.c:conf_read: got stat0=%lx\n", stat0);
+		}
+
+		/* Reset error status.  */
+		*(vulp)LCA_IOC_STAT0 = stat0;
+		mb();
+
+		/* Reset machine check.  */
+		wrmces(0x7);
+
+		value = 0xffffffff;
+	}
+	local_irq_restore(flags);
+	return value;
+}
+
+static void
+conf_write(unsigned long addr, unsigned int value)
+{
+	unsigned long flags, code, stat0;
+
+	local_irq_save(flags);	/* avoid getting hit by machine check */
+
+	/* Reset status register to avoid losing errors.  */
+	stat0 = *(vulp)LCA_IOC_STAT0;
+	*(vulp)LCA_IOC_STAT0 = stat0;
+	mb();
+
+	/* Access configuration space.  */
+	*(vuip)addr = value;
+	draina();
+
+	stat0 = *(vulp)LCA_IOC_STAT0;
+	if (stat0 & LCA_IOC_STAT0_ERR) {
+		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
+			& LCA_IOC_STAT0_CODE_MASK);
+		if (code != 1) {
+			printk("lca.c:conf_write: got stat0=%lx\n", stat0);
+		}
+
+		/* Reset error status.  */
+		*(vulp)LCA_IOC_STAT0 = stat0;
+		mb();
+
+		/* Reset machine check. */
+		wrmces(0x7);
+	}
+	local_irq_restore(flags);
+}
+
+static int
+lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 *value)
+{
+	unsigned long addr, pci_addr;
+	long mask;
+	int shift;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	shift = (where & 3) * 8;
+	mask = (size - 1) * 8;
+	addr = (pci_addr << 5) + mask + LCA_CONF;
+	*value = conf_read(addr) >> (shift);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int 
+lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+		 u32 value)
+{
+	unsigned long addr, pci_addr;
+	long mask;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	addr = (pci_addr << 5) + mask + LCA_CONF;
+	conf_write(addr, value << ((where & 3) * 8));
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops lca_pci_ops = 
+{
+	.read =		lca_read_config,
+	.write =	lca_write_config,
+};
+
+void
+lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	wmb();
+	*(vulp)LCA_IOC_TBIA = 0;
+	mb();
+}
+
+void __init
+lca_init_arch(void)
+{
+	struct pci_controller *hose;
+
+	/*
+	 * Create our single hose.
+	 */
+
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hose->mem_space = &iomem_resource;
+	hose->index = 0;
+
+	hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
+	hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
+	hose->sparse_io_base = LCA_IO - IDENT_ADDR;
+	hose->dense_io_base = 0;
+
+	/*
+	 * Set up the PCI to main memory translation windows.
+	 *
+	 * Mimic the SRM settings for the direct-map window.
+	 *   Window 0 is scatter-gather 8MB at 8MB (for isa).
+	 *   Window 1 is direct access 1GB at 1GB.
+	 *
+	 * Note that we do not try to save any of the DMA window CSRs
+	 * before setting them, since we cannot read those CSRs on LCA.
+	 */
+	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
+				       SMP_CACHE_BYTES);
+	hose->sg_pci = NULL;
+	__direct_map_base = 0x40000000;
+	__direct_map_size = 0x40000000;
+
+	*(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
+	*(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
+	*(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
+
+	*(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
+	*(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
+	*(vulp)LCA_IOC_T_BASE1 = 0;
+
+	*(vulp)LCA_IOC_TB_ENA = 0x80;
+
+	lca_pci_tbi(hose, 0, -1);
+
+	/*
+	 * Disable PCI parity for now.  The NCR53c810 chip has
+	 * troubles meeting the PCI spec which results in
+	 * data parity errors.
+	 */
+	*(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
+
+	/*
+	 * Finally, set up for restoring the correct HAE if using SRM.
+	 * Again, since we cannot read many of the CSRs on the LCA,
+	 * one of which happens to be the HAE, we save the value that
+	 * the SRM will expect...
+	 */
+	if (alpha_using_srm)
+		srm_hae = 0x80000000UL;
+}
+
+/*
+ * Constants used during machine-check handling.  I suppose these
+ * could be moved into lca.h but I don't see much reason why anybody
+ * else would want to use them.
+ */
+
+#define ESR_EAV		(1UL<< 0)	/* error address valid */
+#define ESR_CEE		(1UL<< 1)	/* correctable error */
+#define ESR_UEE		(1UL<< 2)	/* uncorrectable error */
+#define ESR_WRE		(1UL<< 3)	/* write-error */
+#define ESR_SOR		(1UL<< 4)	/* error source */
+#define ESR_CTE		(1UL<< 7)	/* cache-tag error */
+#define ESR_MSE		(1UL<< 9)	/* multiple soft errors */
+#define ESR_MHE		(1UL<<10)	/* multiple hard errors */
+#define ESR_NXM		(1UL<<12)	/* non-existent memory */
+
+#define IOC_ERR		(  1<<4)	/* ioc logs an error */
+#define IOC_CMD_SHIFT	0
+#define IOC_CMD		(0xf<<IOC_CMD_SHIFT)
+#define IOC_CODE_SHIFT	8
+#define IOC_CODE	(0xf<<IOC_CODE_SHIFT)
+#define IOC_LOST	(  1<<5)
+#define IOC_P_NBR	((__u32) ~((1<<13) - 1))
+
+static void
+mem_error(unsigned long esr, unsigned long ear)
+{
+	printk("    %s %s error to %s occurred at address %x\n",
+	       ((esr & ESR_CEE) ? "Correctable" :
+		(esr & ESR_UEE) ? "Uncorrectable" : "A"),
+	       (esr & ESR_WRE) ? "write" : "read",
+	       (esr & ESR_SOR) ? "memory" : "b-cache",
+	       (unsigned) (ear & 0x1ffffff8));
+	if (esr & ESR_CTE) {
+		printk("    A b-cache tag parity error was detected.\n");
+	}
+	if (esr & ESR_MSE) {
+		printk("    Several other correctable errors occurred.\n");
+	}
+	if (esr & ESR_MHE) {
+		printk("    Several other uncorrectable errors occurred.\n");
+	}
+	if (esr & ESR_NXM) {
+		printk("    Attempted to access non-existent memory.\n");
+	}
+}
+
+static void
+ioc_error(__u32 stat0, __u32 stat1)
+{
+	static const char * const pci_cmd[] = {
+		"Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
+		"Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
+		"Rsvd4", "Configuration Read", "Configuration Write",
+		"Memory Read Multiple", "Dual Address", "Memory Read Line",
+		"Memory Write and Invalidate"
+	};
+	static const char * const err_name[] = {
+		"exceeded retry limit", "no device", "bad data parity",
+		"target abort", "bad address parity", "page table read error",
+		"invalid page", "data error"
+	};
+	unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
+	unsigned cmd  = (stat0 & IOC_CMD)  >> IOC_CMD_SHIFT;
+
+	printk("    %s initiated PCI %s cycle to address %x"
+	       " failed due to %s.\n",
+	       code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
+
+	if (code == 5 || code == 6) {
+		printk("    (Error occurred at PCI memory address %x.)\n",
+		       (stat0 & ~IOC_P_NBR));
+	}
+	if (stat0 & IOC_LOST) {
+		printk("    Other PCI errors occurred simultaneously.\n");
+	}
+}
+
+void
+lca_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	const char * reason;
+	union el_lca el;
+
+	el.c = (struct el_common *) la_ptr;
+
+	wrmces(rdmces());	/* reset machine check pending flag */
+
+	printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
+	       vector, get_irq_regs()->pc, (unsigned int) el.c->code);
+
+	/*
+	 * The first quadword after the common header always seems to
+	 * be the machine check reason---don't know why this isn't
+	 * part of the common header instead.  In the case of a long
+	 * logout frame, the upper 32 bits is the machine check
+	 * revision level, which we ignore for now.
+	 */
+	switch ((unsigned int) el.c->code) {
+	case MCHK_K_TPERR:	reason = "tag parity error"; break;
+	case MCHK_K_TCPERR:	reason = "tag control parity error"; break;
+	case MCHK_K_HERR:	reason = "access to non-existent memory"; break;
+	case MCHK_K_ECC_C:	reason = "correctable ECC error"; break;
+	case MCHK_K_ECC_NC:	reason = "non-correctable ECC error"; break;
+	case MCHK_K_CACKSOFT:	reason = "MCHK_K_CACKSOFT"; break;
+	case MCHK_K_BUGCHECK:	reason = "illegal exception in PAL mode"; break;
+	case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
+	case MCHK_K_DCPERR:	reason = "d-cache parity error"; break;
+	case MCHK_K_ICPERR:	reason = "i-cache parity error"; break;
+	case MCHK_K_SIO_SERR:	reason = "SIO SERR occurred on PCI bus"; break;
+	case MCHK_K_SIO_IOCHK:	reason = "SIO IOCHK occurred on ISA bus"; break;
+	case MCHK_K_DCSR:	reason = "MCHK_K_DCSR"; break;
+	case MCHK_K_UNKNOWN:
+	default:		reason = "unknown"; break;
+	}
+
+	switch (el.c->size) {
+	case sizeof(struct el_lca_mcheck_short):
+		printk(KERN_CRIT
+		       "  Reason: %s (short frame%s, dc_stat=%#lx):\n",
+		       reason, el.c->retry ? ", retryable" : "",
+		       el.s->dc_stat);
+		if (el.s->esr & ESR_EAV) {
+			mem_error(el.s->esr, el.s->ear);
+		}
+		if (el.s->ioc_stat0 & IOC_ERR) {
+			ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
+		}
+		break;
+
+	case sizeof(struct el_lca_mcheck_long):
+		printk(KERN_CRIT "  Reason: %s (long frame%s):\n",
+		       reason, el.c->retry ? ", retryable" : "");
+		printk(KERN_CRIT
+		       "    reason: %#lx  exc_addr: %#lx  dc_stat: %#lx\n", 
+		       el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
+		printk(KERN_CRIT "    car: %#lx\n", el.l->car);
+		if (el.l->esr & ESR_EAV) {
+			mem_error(el.l->esr, el.l->ear);
+		}
+		if (el.l->ioc_stat0 & IOC_ERR) {
+			ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
+		}
+		break;
+
+	default:
+		printk(KERN_CRIT "  Unknown errorlog size %d\n", el.c->size);
+	}
+
+	/* Dump the logout area to give all info.  */
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		unsigned long * ptr = (unsigned long *) la_ptr;
+		long i;
+		for (i = 0; i < el.c->size / sizeof(long); i += 2) {
+			printk(KERN_CRIT " +%8lx %016lx %016lx\n",
+			       i*sizeof(long), ptr[i], ptr[i+1]);
+		}
+	}
+#endif /* CONFIG_VERBOSE_MCHECK */
+}
+
+/*
+ * The following routines are needed to support the SPEED changing
+ * necessary to successfully manage the thermal problem on the AlphaBook1.
+ */
+
+void
+lca_clock_print(void)
+{
+        long    pmr_reg;
+
+        pmr_reg = LCA_READ_PMR;
+
+        printk("Status of clock control:\n");
+        printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
+        printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
+        printk("\tInterrupt override is %s\n",
+	       (pmr_reg & LCA_PMR_INTO) ? "on" : "off"); 
+        printk("\tDMA override is %s\n",
+	       (pmr_reg & LCA_PMR_DMAO) ? "on" : "off"); 
+
+}
+
+int
+lca_get_clock(void)
+{
+        long    pmr_reg;
+
+        pmr_reg = LCA_READ_PMR;
+        return(LCA_GET_PRIMARY(pmr_reg));
+
+}
+
+void
+lca_clock_fiddle(int divisor)
+{
+        long    pmr_reg;
+
+        pmr_reg = LCA_READ_PMR;
+        LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
+	/* lca_norm_clock = divisor; */
+        LCA_WRITE_PMR(pmr_reg);
+        mb();
+}
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
new file mode 100644
index 0000000000..e9348aec46
--- /dev/null
+++ b/arch/alpha/kernel/core_marvel.c
@@ -0,0 +1,1099 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_marvel.c
+ *
+ * Code common to all Marvel based systems.
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_marvel.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/mc146818rtc.h>
+#include <linux/rtc.h>
+#include <linux/module.h>
+#include <linux/memblock.h>
+
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+#include <asm/gct.h>
+#include <asm/tlbflush.h>
+#include <asm/vga.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+
+/*
+ * Debug helpers
+ */
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG_CFG(args) printk args
+#else
+# define DBG_CFG(args)
+#endif
+
+
+/*
+ * Private data
+ */
+static struct io7 *io7_head = NULL;
+
+
+/*
+ * Helper functions
+ */
+static unsigned long __attribute__ ((unused))
+read_ev7_csr(int pe, unsigned long offset)
+{
+	ev7_csr *ev7csr = EV7_CSR_KERN(pe, offset);
+	unsigned long q;
+
+	mb();
+	q = ev7csr->csr;
+	mb();
+
+	return q;
+}
+
+static void __attribute__ ((unused))
+write_ev7_csr(int pe, unsigned long offset, unsigned long q)
+{
+	ev7_csr *ev7csr = EV7_CSR_KERN(pe, offset);
+
+	mb();
+	ev7csr->csr = q;
+	mb();
+}
+
+static char * __init
+mk_resource_name(int pe, int port, char *str)
+{
+	char tmp[80];
+	char *name;
+	
+	sprintf(tmp, "PCI %s PE %d PORT %d", str, pe, port);
+	name = memblock_alloc(strlen(tmp) + 1, SMP_CACHE_BYTES);
+	if (!name)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      strlen(tmp) + 1);
+	strcpy(name, tmp);
+
+	return name;
+}
+
+inline struct io7 *
+marvel_next_io7(struct io7 *prev)
+{
+	return (prev ? prev->next : io7_head);
+}
+
+struct io7 *
+marvel_find_io7(int pe)
+{
+	struct io7 *io7;
+
+	for (io7 = io7_head; io7 && io7->pe != pe; io7 = io7->next)
+		continue;
+
+	return io7;
+}
+
+static struct io7 * __init
+alloc_io7(unsigned int pe)
+{
+	struct io7 *io7;
+	struct io7 *insp;
+	int h;
+
+	if (marvel_find_io7(pe)) {
+		printk(KERN_WARNING "IO7 at PE %d already allocated!\n", pe);
+		return NULL;
+	}
+
+	io7 = memblock_alloc(sizeof(*io7), SMP_CACHE_BYTES);
+	if (!io7)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(*io7));
+	io7->pe = pe;
+	raw_spin_lock_init(&io7->irq_lock);
+
+	for (h = 0; h < 4; h++) {
+		io7->ports[h].io7 = io7;
+		io7->ports[h].port = h;
+		io7->ports[h].enabled = 0; /* default to disabled */
+	}
+
+	/*
+	 * Insert in pe sorted order.
+	 */
+	if (NULL == io7_head)			/* empty list */
+		io7_head = io7;	
+	else if (io7_head->pe > io7->pe) {	/* insert at head */
+		io7->next = io7_head;
+		io7_head = io7;
+	} else {				/* insert at position */
+		for (insp = io7_head; insp; insp = insp->next) {
+			if (insp->pe == io7->pe) {
+				printk(KERN_ERR "Too many IO7s at PE %d\n", 
+				       io7->pe);
+				return NULL;
+			}
+
+			if (NULL == insp->next || 
+			    insp->next->pe > io7->pe) { /* insert here */
+				io7->next = insp->next;
+				insp->next = io7;
+				break;
+			}
+		}
+
+		if (NULL == insp) { /* couldn't insert ?!? */
+			printk(KERN_WARNING "Failed to insert IO7 at PE %d "
+			       " - adding at head of list\n", io7->pe);
+			io7->next = io7_head;
+			io7_head = io7;
+		}
+	}
+	
+	return io7;
+}
+
+void
+io7_clear_errors(struct io7 *io7)
+{
+	io7_port7_csrs *p7csrs;
+	io7_ioport_csrs *csrs;
+	int port;
+
+
+	/*
+	 * First the IO ports.
+	 */
+	for (port = 0; port < 4; port++) {
+		csrs = IO7_CSRS_KERN(io7->pe, port);
+
+		csrs->POx_ERR_SUM.csr = -1UL;
+		csrs->POx_TLB_ERR.csr = -1UL;
+		csrs->POx_SPL_COMPLT.csr = -1UL;
+		csrs->POx_TRANS_SUM.csr = -1UL;
+	}
+
+	/*
+	 * Then the common ones.
+	 */
+	p7csrs = IO7_PORT7_CSRS_KERN(io7->pe);
+
+	p7csrs->PO7_ERROR_SUM.csr = -1UL;
+	p7csrs->PO7_UNCRR_SYM.csr = -1UL;
+	p7csrs->PO7_CRRCT_SYM.csr = -1UL;
+}
+
+
+/*
+ * IO7 PCI, PCI/X, AGP configuration.
+ */
+static void __init
+io7_init_hose(struct io7 *io7, int port)
+{
+	static int hose_index = 0;
+
+	struct pci_controller *hose = alloc_pci_controller();
+	struct io7_port *io7_port = &io7->ports[port];
+	io7_ioport_csrs *csrs = IO7_CSRS_KERN(io7->pe, port);
+	int i;
+
+	hose->index = hose_index++;	/* arbitrary */
+	
+	/*
+	 * We don't have an isa or legacy hose, but glibc expects to be
+	 * able to use the bus == 0 / dev == 0 form of the iobase syscall
+	 * to determine information about the i/o system. Since XFree86 
+	 * relies on glibc's determination to tell whether or not to use
+	 * sparse access, we need to point the pci_isa_hose at a real hose
+	 * so at least that determination is correct.
+	 */
+	if (hose->index == 0)
+		pci_isa_hose = hose;
+
+	io7_port->csrs = csrs;
+	io7_port->hose = hose;
+	hose->sysdata = io7_port;
+
+	hose->io_space = alloc_resource();
+	hose->mem_space = alloc_resource();
+
+	/*
+	 * Base addresses for userland consumption. Since these are going
+	 * to be mapped, they are pure physical addresses.
+	 */
+	hose->sparse_mem_base = hose->sparse_io_base = 0;
+	hose->dense_mem_base = IO7_MEM_PHYS(io7->pe, port);
+	hose->dense_io_base = IO7_IO_PHYS(io7->pe, port);
+
+	/*
+	 * Base addresses and resource ranges for kernel consumption.
+	 */
+	hose->config_space_base = (unsigned long)IO7_CONF_KERN(io7->pe, port);
+
+	hose->io_space->start = (unsigned long)IO7_IO_KERN(io7->pe, port);
+	hose->io_space->end = hose->io_space->start + IO7_IO_SPACE - 1;
+	hose->io_space->name = mk_resource_name(io7->pe, port, "IO");
+	hose->io_space->flags = IORESOURCE_IO;
+
+	hose->mem_space->start = (unsigned long)IO7_MEM_KERN(io7->pe, port);
+	hose->mem_space->end = hose->mem_space->start + IO7_MEM_SPACE - 1;
+	hose->mem_space->name = mk_resource_name(io7->pe, port, "MEM");
+	hose->mem_space->flags = IORESOURCE_MEM;
+
+	if (request_resource(&ioport_resource, hose->io_space) < 0)
+		printk(KERN_ERR "Failed to request IO on hose %d\n", 
+		       hose->index);
+	if (request_resource(&iomem_resource, hose->mem_space) < 0)
+		printk(KERN_ERR "Failed to request MEM on hose %d\n", 
+		       hose->index);
+
+	/*
+	 * Save the existing DMA window settings for later restoration.
+	 */
+	for (i = 0; i < 4; i++) {
+		io7_port->saved_wbase[i] = csrs->POx_WBASE[i].csr;
+		io7_port->saved_wmask[i] = csrs->POx_WMASK[i].csr;
+		io7_port->saved_tbase[i] = csrs->POx_TBASE[i].csr;
+	}
+
+	/*
+	 * Set up the PCI to main memory translation windows.
+	 *
+	 * Window 0 is scatter-gather 8MB at 8MB
+	 * Window 1 is direct access 1GB at 2GB
+	 * Window 2 is scatter-gather (up-to) 1GB at 3GB
+	 * Window 3 is disabled
+	 */
+
+	/*
+	 * TBIA before modifying windows.
+	 */
+	marvel_pci_tbi(hose, 0, -1);
+
+	/*
+	 * Set up window 0 for scatter-gather 8MB at 8MB.
+	 */
+	hose->sg_isa = iommu_arena_new_node(0, hose, 0x00800000, 0x00800000, 0);
+	hose->sg_isa->align_entry = 8;	/* cache line boundary */
+	csrs->POx_WBASE[0].csr = 
+		hose->sg_isa->dma_base | wbase_m_ena | wbase_m_sg;
+	csrs->POx_WMASK[0].csr = (hose->sg_isa->size - 1) & wbase_m_addr;
+	csrs->POx_TBASE[0].csr = virt_to_phys(hose->sg_isa->ptes);
+
+	/*
+	 * Set up window 1 for direct-mapped 1GB at 2GB.
+	 */
+	csrs->POx_WBASE[1].csr = __direct_map_base | wbase_m_ena;
+	csrs->POx_WMASK[1].csr = (__direct_map_size - 1) & wbase_m_addr;
+	csrs->POx_TBASE[1].csr = 0;
+
+	/*
+	 * Set up window 2 for scatter-gather (up-to) 1GB at 3GB.
+	 */
+	hose->sg_pci = iommu_arena_new_node(0, hose, 0xc0000000, 0x40000000, 0);
+	hose->sg_pci->align_entry = 8;	/* cache line boundary */
+	csrs->POx_WBASE[2].csr = 
+		hose->sg_pci->dma_base | wbase_m_ena | wbase_m_sg;
+	csrs->POx_WMASK[2].csr = (hose->sg_pci->size - 1) & wbase_m_addr;
+	csrs->POx_TBASE[2].csr = virt_to_phys(hose->sg_pci->ptes);
+
+	/*
+	 * Disable window 3.
+	 */
+	csrs->POx_WBASE[3].csr = 0;
+
+	/*
+	 * Make sure that the AGP Monster Window is disabled.
+	 */
+	csrs->POx_CTRL.csr &= ~(1UL << 61);
+
+#if 1
+	printk("FIXME: disabling master aborts\n");
+	csrs->POx_MSK_HEI.csr &= ~(3UL << 14);
+#endif
+	/*
+	 * TBIA after modifying windows.
+	 */
+	marvel_pci_tbi(hose, 0, -1);
+}
+
+static void __init
+marvel_init_io7(struct io7 *io7)
+{
+	int i;
+
+	printk("Initializing IO7 at PID %d\n", io7->pe);
+
+	/*
+	 * Get the Port 7 CSR pointer.
+	 */
+	io7->csrs = IO7_PORT7_CSRS_KERN(io7->pe);
+
+	/*
+	 * Init this IO7's hoses.
+	 */
+	for (i = 0; i < IO7_NUM_PORTS; i++) {
+		io7_ioport_csrs *csrs = IO7_CSRS_KERN(io7->pe, i);
+		if (csrs->POx_CACHE_CTL.csr == 8) {
+			io7->ports[i].enabled = 1;
+			io7_init_hose(io7, i);
+		}
+	}
+}
+
+void __init
+marvel_io7_present(gct6_node *node)
+{
+	int pe;
+
+	if (node->type != GCT_TYPE_HOSE ||
+	    node->subtype != GCT_SUBTYPE_IO_PORT_MODULE) 
+		return;
+
+	pe = (node->id >> 8) & 0xff;
+	printk("Found an IO7 at PID %d\n", pe);
+
+	alloc_io7(pe);
+}
+
+static void __init
+marvel_find_console_vga_hose(void)
+{
+#ifdef CONFIG_VGA_HOSE
+	u64 *pu64 = (u64 *)((u64)hwrpb + hwrpb->ctbt_offset);
+
+	if (pu64[7] == 3) {	/* TERM_TYPE == graphics */
+		struct pci_controller *hose = NULL;
+		int h = (pu64[30] >> 24) & 0xff; /* TERM_OUT_LOC, hose # */
+		struct io7 *io7;
+		int pid, port;
+
+		/* FIXME - encoding is going to have to change for Marvel
+		 *         since hose will be able to overflow a byte...
+		 *         need to fix this decode when the console 
+		 *         changes its encoding
+		 */
+		printk("console graphics is on hose %d (console)\n", h);
+
+		/*
+		 * The console's hose numbering is:
+		 *
+		 *	hose<n:2>: PID
+		 *	hose<1:0>: PORT
+		 *
+		 * We need to find the hose at that pid and port
+		 */
+		pid = h >> 2;
+		port = h & 3;
+		if ((io7 = marvel_find_io7(pid)))
+			hose = io7->ports[port].hose;
+
+		if (hose) {
+			printk("Console graphics on hose %d\n", hose->index);
+			pci_vga_hose = hose;
+		}
+	}
+#endif
+}
+
+gct6_search_struct gct_wanted_node_list[] __initdata = {
+	{ GCT_TYPE_HOSE, GCT_SUBTYPE_IO_PORT_MODULE, marvel_io7_present },
+	{ 0, 0, NULL }
+};
+
+/*
+ * In case the GCT is not complete, let the user specify PIDs with IO7s
+ * at boot time. Syntax is 'io7=a,b,c,...,n' where a-n are the PIDs (decimal)
+ * where IO7s are connected
+ */
+static int __init
+marvel_specify_io7(char *str)
+{
+	unsigned long pid;
+	struct io7 *io7;
+	char *pchar;
+
+	do {
+		pid = simple_strtoul(str, &pchar, 0);
+		if (pchar != str) {
+			printk("User-specified IO7 at PID %lu\n", pid);
+			io7 = alloc_io7(pid);
+			if (io7) marvel_init_io7(io7);
+		}
+
+		if (pchar == str) pchar++;
+		str = pchar;
+	} while(*str);
+
+	return 1;
+}
+__setup("io7=", marvel_specify_io7);
+
+void __init
+marvel_init_arch(void)
+{
+	struct io7 *io7;
+
+	/* With multiple PCI busses, we play with I/O as physical addrs.  */
+	ioport_resource.end = ~0UL;
+
+	/* PCI DMA Direct Mapping is 1GB at 2GB.  */
+	__direct_map_base = 0x80000000;
+	__direct_map_size = 0x40000000;
+
+	/* Parse the config tree.  */
+	gct6_find_nodes(GCT_NODE_PTR(0), gct_wanted_node_list);
+
+	/* Init the io7s.  */
+	for (io7 = NULL; NULL != (io7 = marvel_next_io7(io7)); ) 
+		marvel_init_io7(io7);
+
+	/* Check for graphic console location (if any).  */
+	marvel_find_console_vga_hose();
+}
+
+void
+marvel_kill_arch(int mode)
+{
+}
+
+
+/*
+ * PCI Configuration Space access functions
+ *
+ * Configuration space addresses have the following format:
+ *
+ * 	|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ * 	|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * 	+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * 	|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|R|R|
+ * 	+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	 n:24	reserved for hose base
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	IO7 determines whether to use a type 0 or type 1 config cycle
+ *	based on the bus number. Therefore the bus number must be set 
+ *	to 0 for the root bus on any hose.
+ *	
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ */
+
+static inline unsigned long
+build_conf_addr(struct pci_controller *hose, u8 bus, 
+		unsigned int devfn, int where)
+{
+	return (hose->config_space_base | (bus << 16) | (devfn << 8) | where);
+}
+
+static unsigned long
+mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where)
+{
+	struct pci_controller *hose = pbus->sysdata;
+	struct io7_port *io7_port;
+	unsigned long addr = 0;
+	u8 bus = pbus->number;
+
+	if (!hose)
+		return addr;
+
+	/* Check for enabled.  */
+	io7_port = hose->sysdata;
+	if (!io7_port->enabled)
+		return addr;
+
+	if (!pbus->parent) { /* No parent means peer PCI bus. */
+		/* Don't support idsel > 20 on primary bus.  */
+		if (devfn >= PCI_DEVFN(21, 0))
+			return addr;
+		bus = 0;
+	}
+
+	addr = build_conf_addr(hose, bus, devfn, where);
+
+	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return addr;
+}
+
+static int
+marvel_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		   int size, u32 *value)
+{
+	unsigned long addr;
+	
+	if (0 == (addr = mk_conf_addr(bus, devfn, where)))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch(size) {
+	case 1:	
+		*value = __kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:	
+		*value = __kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:	
+		*value = *(vuip)addr;
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+marvel_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 value)
+{
+	unsigned long addr;
+	
+	if (0 == (addr = mk_conf_addr(bus, devfn, where)))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		__kernel_stb(value, *(vucp)addr);
+		mb();
+		__kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		__kernel_stw(value, *(vusp)addr);
+		mb();
+		__kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*(vuip)addr = value;
+		mb();
+		*(vuip)addr;
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops marvel_pci_ops =
+{
+	.read =		marvel_read_config,
+	.write = 	marvel_write_config,
+};
+
+
+/*
+ * Other PCI helper functions.
+ */
+void
+marvel_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	io7_ioport_csrs *csrs = ((struct io7_port *)hose->sysdata)->csrs;
+
+	wmb();
+	csrs->POx_SG_TBIA.csr = 0;
+	mb();
+	csrs->POx_SG_TBIA.csr;
+}
+
+
+
+/*
+ * RTC Support
+ */
+struct marvel_rtc_access_info {
+	unsigned long function;
+	unsigned long index;
+	unsigned long data;
+};
+
+static void
+__marvel_access_rtc(void *info)
+{
+	struct marvel_rtc_access_info *rtc_access = info;
+
+	register unsigned long __r0 __asm__("$0");
+	register unsigned long __r16 __asm__("$16") = rtc_access->function;
+	register unsigned long __r17 __asm__("$17") = rtc_access->index;
+	register unsigned long __r18 __asm__("$18") = rtc_access->data;
+	
+	__asm__ __volatile__(
+		"call_pal %4 # cserve rtc"
+		: "=r"(__r16), "=r"(__r17), "=r"(__r18), "=r"(__r0)
+		: "i"(PAL_cserve), "0"(__r16), "1"(__r17), "2"(__r18)
+		: "$1", "$22", "$23", "$24", "$25");
+
+	rtc_access->data = __r0;
+}
+
+static u8
+__marvel_rtc_io(u8 b, unsigned long addr, int write)
+{
+	static u8 index = 0;
+
+	struct marvel_rtc_access_info rtc_access;
+	u8 ret = 0;
+
+	switch(addr) {
+	case 0x70:					/* RTC_PORT(0) */
+		if (write) index = b;
+		ret = index;
+		break;
+
+	case 0x71:					/* RTC_PORT(1) */
+		rtc_access.index = index;
+		rtc_access.data = bcd2bin(b);
+		rtc_access.function = 0x48 + !write;	/* GET/PUT_TOY */
+
+		__marvel_access_rtc(&rtc_access);
+
+		ret = bin2bcd(rtc_access.data);
+		break;
+
+	default:
+		printk(KERN_WARNING "Illegal RTC port %lx\n", addr);
+		break;
+	}
+
+	return ret;
+}
+
+
+/*
+ * IO map support.
+ */
+void __iomem *
+marvel_ioremap(unsigned long addr, unsigned long size)
+{
+	struct pci_controller *hose;
+	unsigned long baddr, last;
+	struct vm_struct *area;
+	unsigned long vaddr;
+	unsigned long *ptes;
+	unsigned long pfn;
+
+	/*
+	 * Adjust the address.
+	 */ 
+	FIXUP_MEMADDR_VGA(addr);
+
+	/*
+	 * Find the hose.
+	 */
+	for (hose = hose_head; hose; hose = hose->next) {
+		if ((addr >> 32) == (hose->mem_space->start >> 32))
+			break; 
+	}
+	if (!hose)
+		return NULL;
+
+	/*
+	 * We have the hose - calculate the bus limits.
+	 */
+	baddr = addr - hose->mem_space->start;
+	last = baddr + size - 1;
+
+	/*
+	 * Is it direct-mapped?
+	 */
+	if ((baddr >= __direct_map_base) && 
+	    ((baddr + size - 1) < __direct_map_base + __direct_map_size)) {
+		addr = IDENT_ADDR | (baddr - __direct_map_base);
+		return (void __iomem *) addr;
+	}
+
+	/* 
+	 * Check the scatter-gather arena.
+	 */
+	if (hose->sg_pci &&
+	    baddr >= (unsigned long)hose->sg_pci->dma_base &&
+	    last < (unsigned long)hose->sg_pci->dma_base + hose->sg_pci->size) {
+
+		/*
+		 * Adjust the limits (mappings must be page aligned)
+		 */
+		baddr -= hose->sg_pci->dma_base;
+		last -= hose->sg_pci->dma_base;
+		baddr &= PAGE_MASK;
+		size = PAGE_ALIGN(last) - baddr;
+
+		/*
+		 * Map it.
+		 */
+		area = get_vm_area(size, VM_IOREMAP);
+		if (!area)
+			return NULL;
+
+		ptes = hose->sg_pci->ptes;
+		for (vaddr = (unsigned long)area->addr; 
+		    baddr <= last; 
+		    baddr += PAGE_SIZE, vaddr += PAGE_SIZE) {
+			pfn = ptes[baddr >> PAGE_SHIFT];
+			if (!(pfn & 1)) {
+				printk("ioremap failed... pte not valid...\n");
+				vfree(area->addr);
+				return NULL;
+			}
+			pfn >>= 1;	/* make it a true pfn */
+			
+			if (__alpha_remap_area_pages(vaddr,
+						     pfn << PAGE_SHIFT, 
+						     PAGE_SIZE, 0)) {
+				printk("FAILED to map...\n");
+				vfree(area->addr);
+				return NULL;
+			}
+		}
+
+		flush_tlb_all();
+
+		vaddr = (unsigned long)area->addr + (addr & ~PAGE_MASK);
+
+		return (void __iomem *) vaddr;
+	}
+
+	/* Assume it was already a reasonable address */
+	vaddr = baddr + hose->mem_space->start;
+	return (void __iomem *) vaddr;
+}
+
+void
+marvel_iounmap(volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr >= VMALLOC_START)
+		vfree((void *)(PAGE_MASK & addr)); 
+}
+
+int
+marvel_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+
+	if (addr >= VMALLOC_START)
+		return 1;
+	else
+		return (addr & 0xFF000000UL) == 0;
+}
+
+#define __marvel_is_port_kbd(a)	(((a) == 0x60) || ((a) == 0x64))
+#define __marvel_is_port_rtc(a)	(((a) == 0x70) || ((a) == 0x71))
+
+void __iomem *marvel_ioportmap (unsigned long addr)
+{
+	FIXUP_IOADDR_VGA(addr);
+	return (void __iomem *)addr;
+}
+
+u8
+marvel_ioread8(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (__marvel_is_port_kbd(addr))
+		return 0;
+	else if (__marvel_is_port_rtc(addr))
+		return __marvel_rtc_io(0, addr, 0);
+	else if (marvel_is_ioaddr(addr))
+		return __kernel_ldbu(*(vucp)addr);
+	else
+		/* this should catch other legacy addresses
+		   that would normally fail on MARVEL,
+		   because there really is nothing there...
+		*/
+		return ~0;
+}
+
+void
+marvel_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (__marvel_is_port_kbd(addr))
+		return;
+	else if (__marvel_is_port_rtc(addr)) 
+		__marvel_rtc_io(b, addr, 1);
+	else if (marvel_is_ioaddr(addr))
+		__kernel_stb(b, *(vucp)addr);
+}
+
+#ifndef CONFIG_ALPHA_GENERIC
+EXPORT_SYMBOL(marvel_ioremap);
+EXPORT_SYMBOL(marvel_iounmap);
+EXPORT_SYMBOL(marvel_is_mmio);
+EXPORT_SYMBOL(marvel_ioportmap);
+EXPORT_SYMBOL(marvel_ioread8);
+EXPORT_SYMBOL(marvel_iowrite8);
+#endif
+
+/*
+ * AGP GART Support.
+ */
+#include <linux/agp_backend.h>
+#include <asm/agp_backend.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+struct marvel_agp_aperture {
+	struct pci_iommu_arena *arena;
+	long pg_start;
+	long pg_count;
+};
+
+static int
+marvel_agp_setup(alpha_agp_info *agp)
+{
+	struct marvel_agp_aperture *aper;
+
+	if (!alpha_agpgart_size)
+		return -ENOMEM;
+
+	aper = kmalloc(sizeof(*aper), GFP_KERNEL);
+	if (aper == NULL) return -ENOMEM;
+
+	aper->arena = agp->hose->sg_pci;
+	aper->pg_count = alpha_agpgart_size / PAGE_SIZE;
+	aper->pg_start = iommu_reserve(aper->arena, aper->pg_count,
+				       aper->pg_count - 1);
+
+	if (aper->pg_start < 0) {
+		printk(KERN_ERR "Failed to reserve AGP memory\n");
+		kfree(aper);
+		return -ENOMEM;
+	}
+
+	agp->aperture.bus_base = 
+		aper->arena->dma_base + aper->pg_start * PAGE_SIZE;
+	agp->aperture.size = aper->pg_count * PAGE_SIZE;
+	agp->aperture.sysdata = aper;
+
+	return 0;
+}
+
+static void
+marvel_agp_cleanup(alpha_agp_info *agp)
+{
+	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
+	int status;
+
+	status = iommu_release(aper->arena, aper->pg_start, aper->pg_count);
+	if (status == -EBUSY) {
+		printk(KERN_WARNING
+		       "Attempted to release bound AGP memory - unbinding\n");
+		iommu_unbind(aper->arena, aper->pg_start, aper->pg_count);
+		status = iommu_release(aper->arena, aper->pg_start, 
+				       aper->pg_count);
+	}
+	if (status < 0)
+		printk(KERN_ERR "Failed to release AGP memory\n");
+
+	kfree(aper);
+	kfree(agp);
+}
+
+static int
+marvel_agp_configure(alpha_agp_info *agp)
+{
+	io7_ioport_csrs *csrs = ((struct io7_port *)agp->hose->sysdata)->csrs;
+	struct io7 *io7 = ((struct io7_port *)agp->hose->sysdata)->io7;
+	unsigned int new_rate = 0;
+	unsigned long agp_pll;
+
+	/*
+	 * Check the requested mode against the PLL setting.
+	 * The agpgart_be code has not programmed the card yet,
+	 * so we can still tweak mode here.
+	 */
+	agp_pll = io7->csrs->POx_RST[IO7_AGP_PORT].csr;
+	switch(IO7_PLL_RNGB(agp_pll)) {
+	case 0x4:				/* 2x only */
+		/* 
+		 * The PLL is only programmed for 2x, so adjust the
+		 * rate to 2x, if necessary.
+		 */
+		if (agp->mode.bits.rate != 2) 
+			new_rate = 2;
+		break;
+
+	case 0x6:				/* 1x / 4x */
+		/*
+		 * The PLL is programmed for 1x or 4x.  Don't go faster
+		 * than requested, so if the requested rate is 2x, use 1x.
+		 */
+		if (agp->mode.bits.rate == 2) 
+			new_rate = 1;
+		break;
+
+	default:				/* ??????? */
+		/*
+		 * Don't know what this PLL setting is, take the requested
+		 * rate, but warn the user.
+		 */
+		printk("%s: unknown PLL setting RNGB=%lx (PLL6_CTL=%016lx)\n",
+		       __func__, IO7_PLL_RNGB(agp_pll), agp_pll);
+		break;
+	}
+
+	/*
+	 * Set the new rate, if necessary.
+	 */
+	if (new_rate) {
+		printk("Requested AGP Rate %dX not compatible "
+		       "with PLL setting - using %dX\n",
+		       agp->mode.bits.rate,
+		       new_rate);
+
+		agp->mode.bits.rate = new_rate;
+	}
+		
+	printk("Enabling AGP on hose %d: %dX%s RQ %d\n", 
+	       agp->hose->index, agp->mode.bits.rate, 
+	       agp->mode.bits.sba ? " - SBA" : "", agp->mode.bits.rq);
+
+	csrs->AGP_CMD.csr = agp->mode.lw;
+
+	return 0;
+}
+
+static int 
+marvel_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *mem)
+{
+	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
+	return iommu_bind(aper->arena, aper->pg_start + pg_start, 
+			  mem->page_count, mem->pages);
+}
+
+static int 
+marvel_agp_unbind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *mem)
+{
+	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
+	return iommu_unbind(aper->arena, aper->pg_start + pg_start,
+			    mem->page_count);
+}
+
+static unsigned long
+marvel_agp_translate(alpha_agp_info *agp, dma_addr_t addr)
+{
+	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
+	unsigned long baddr = addr - aper->arena->dma_base;
+	unsigned long pte;
+
+	if (addr < agp->aperture.bus_base ||
+	    addr >= agp->aperture.bus_base + agp->aperture.size) {
+		printk("%s: addr out of range\n", __func__);
+		return -EINVAL;
+	}
+
+	pte = aper->arena->ptes[baddr >> PAGE_SHIFT];
+	if (!(pte & 1)) {
+		printk("%s: pte not valid\n", __func__);
+		return -EINVAL;
+	} 
+	return (pte >> 1) << PAGE_SHIFT;
+}
+
+struct alpha_agp_ops marvel_agp_ops =
+{
+	.setup		= marvel_agp_setup,
+	.cleanup	= marvel_agp_cleanup,
+	.configure	= marvel_agp_configure,
+	.bind		= marvel_agp_bind_memory,
+	.unbind		= marvel_agp_unbind_memory,
+	.translate	= marvel_agp_translate
+};
+
+alpha_agp_info *
+marvel_agp_info(void)
+{
+	struct pci_controller *hose;
+	io7_ioport_csrs *csrs;
+	alpha_agp_info *agp;
+	struct io7 *io7;
+
+	/*
+	 * Find the first IO7 with an AGP card.
+	 *
+	 * FIXME -- there should be a better way (we want to be able to
+	 * specify and what if the agp card is not video???)
+	 */
+	hose = NULL;
+	for (io7 = NULL; (io7 = marvel_next_io7(io7)) != NULL; ) {
+		struct pci_controller *h;
+		vuip addr;
+
+		if (!io7->ports[IO7_AGP_PORT].enabled)
+			continue;
+
+		h = io7->ports[IO7_AGP_PORT].hose;
+		addr = (vuip)build_conf_addr(h, 0, PCI_DEVFN(5, 0), 0);
+
+		if (*addr != 0xffffffffu) {
+			hose = h;
+			break;
+		}
+	}
+
+	if (!hose || !hose->sg_pci)
+		return NULL;
+
+	printk("MARVEL - using hose %d as AGP\n", hose->index);
+
+	/* 
+	 * Get the csrs from the hose.
+	 */
+	csrs = ((struct io7_port *)hose->sysdata)->csrs;
+
+	/*
+	 * Allocate the info structure.
+	 */
+	agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+	if (!agp)
+		return NULL;
+
+	/*
+	 * Fill it in.
+	 */
+	agp->hose = hose;
+	agp->private = NULL;
+	agp->ops = &marvel_agp_ops;
+
+	/*
+	 * Aperture - not configured until ops.setup().
+	 */
+	agp->aperture.bus_base = 0;
+	agp->aperture.size = 0;
+	agp->aperture.sysdata = NULL;
+
+	/*
+	 * Capabilities.
+	 *
+	 * NOTE: IO7 reports through AGP_STAT that it can support a read queue
+	 *       depth of 17 (rq = 0x10). It actually only supports a depth of
+	 * 	 16 (rq = 0xf).
+	 */
+	agp->capability.lw = csrs->AGP_STAT.csr;
+	agp->capability.bits.rq = 0xf;
+	
+	/*
+	 * Mode.
+	 */
+	agp->mode.lw = csrs->AGP_CMD.csr;
+
+	return agp;
+}
diff --git a/arch/alpha/kernel/core_mcpcia.c b/arch/alpha/kernel/core_mcpcia.c
new file mode 100644
index 0000000000..74b1d01812
--- /dev/null
+++ b/arch/alpha/kernel/core_mcpcia.c
@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_mcpcia.c
+ *
+ * Based on code written by David A Rusling (david.rusling@reo.mts.dec.com).
+ *
+ * Code common to all MCbus-PCI Adaptor core logic chipsets
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_mcpcia.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/ptrace.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/*
+ * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
+ * One plausible explanation is that the i/o controller does not properly
+ * handle the system transaction.  Another involves timing.  Ho hum.
+ */
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CFG 0
+
+#if DEBUG_CFG
+# define DBG_CFG(args)	printk args
+#else
+# define DBG_CFG(args)
+#endif
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address and setup the MCPCIA_HAXR2 register
+ * accordingly.  It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Type 0:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:11	Device select bit.
+ * 	10:8	Function number
+ * 	 7:2	Register number
+ *
+ * Type 1:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:24	reserved
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static unsigned int
+conf_read(unsigned long addr, unsigned char type1,
+	  struct pci_controller *hose)
+{
+	unsigned long flags;
+	unsigned long mid = MCPCIA_HOSE2MID(hose->index);
+	unsigned int stat0, value, cpu;
+
+	cpu = smp_processor_id();
+
+	local_irq_save(flags);
+
+	DBG_CFG(("conf_read(addr=0x%lx, type1=%d, hose=%d)\n",
+		 addr, type1, mid));
+
+	/* Reset status register to avoid losing errors.  */
+	stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
+	*(vuip)MCPCIA_CAP_ERR(mid) = stat0;
+	mb();
+	*(vuip)MCPCIA_CAP_ERR(mid);
+	DBG_CFG(("conf_read: MCPCIA_CAP_ERR(%d) was 0x%x\n", mid, stat0));
+
+	mb();
+	draina();
+	mcheck_expected(cpu) = 1;
+	mcheck_taken(cpu) = 0;
+	mcheck_extra(cpu) = mid;
+	mb();
+
+	/* Access configuration space.  */
+	value = *((vuip)addr);
+	mb();
+	mb();  /* magic */
+
+	if (mcheck_taken(cpu)) {
+		mcheck_taken(cpu) = 0;
+		value = 0xffffffffU;
+		mb();
+	}
+	mcheck_expected(cpu) = 0;
+	mb();
+
+	DBG_CFG(("conf_read(): finished\n"));
+
+	local_irq_restore(flags);
+	return value;
+}
+
+static void
+conf_write(unsigned long addr, unsigned int value, unsigned char type1,
+	   struct pci_controller *hose)
+{
+	unsigned long flags;
+	unsigned long mid = MCPCIA_HOSE2MID(hose->index);
+	unsigned int stat0, cpu;
+
+	cpu = smp_processor_id();
+
+	local_irq_save(flags);	/* avoid getting hit by machine check */
+
+	/* Reset status register to avoid losing errors.  */
+	stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
+	*(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb();
+	*(vuip)MCPCIA_CAP_ERR(mid);
+	DBG_CFG(("conf_write: MCPCIA CAP_ERR(%d) was 0x%x\n", mid, stat0));
+
+	draina();
+	mcheck_expected(cpu) = 1;
+	mcheck_extra(cpu) = mid;
+	mb();
+
+	/* Access configuration space.  */
+	*((vuip)addr) = value;
+	mb();
+	mb();  /* magic */
+	*(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */
+	mcheck_expected(cpu) = 0;
+	mb();
+
+	DBG_CFG(("conf_write(): finished\n"));
+	local_irq_restore(flags);
+}
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where,
+	     struct pci_controller *hose, unsigned long *pci_addr,
+	     unsigned char *type1)
+{
+	u8 bus = pbus->number;
+	unsigned long addr;
+
+	DBG_CFG(("mk_conf_addr(bus=%d,devfn=0x%x,hose=%d,where=0x%x,"
+		 " pci_addr=0x%p, type1=0x%p)\n",
+		 bus, devfn, hose->index, where, pci_addr, type1));
+
+	/* Type 1 configuration cycle for *ALL* busses.  */
+	*type1 = 1;
+
+	if (!pbus->parent) /* No parent means peer PCI bus. */
+		bus = 0;
+	addr = (bus << 16) | (devfn << 8) | (where);
+	addr <<= 5; /* swizzle for SPARSE */
+	addr |= hose->config_space_base;
+
+	*pci_addr = addr;
+	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return 0;
+}
+
+static int
+mcpcia_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		   int size, u32 *value)
+{
+	struct pci_controller *hose = bus->sysdata;
+	unsigned long addr, w;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr |= (size - 1) * 8;
+	w = conf_read(addr, type1, hose);
+	switch (size) {
+	case 1:
+		*value = __kernel_extbl(w, where & 3);
+		break;
+	case 2:
+		*value = __kernel_extwl(w, where & 3);
+		break;
+	case 4:
+		*value = w;
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+mcpcia_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 value)
+{
+	struct pci_controller *hose = bus->sysdata;
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr |= (size - 1) * 8;
+	value = __kernel_insql(value, where & 3);
+	conf_write(addr, value, type1, hose);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops mcpcia_pci_ops = 
+{
+	.read =		mcpcia_read_config,
+	.write =	mcpcia_write_config,
+};
+
+void
+mcpcia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	wmb();
+	*(vuip)MCPCIA_SG_TBIA(MCPCIA_HOSE2MID(hose->index)) = 0;
+	mb();
+}
+
+static int __init
+mcpcia_probe_hose(int h)
+{
+	int cpu = smp_processor_id();
+	int mid = MCPCIA_HOSE2MID(h);
+	unsigned int pci_rev;
+
+	/* Gotta be REAL careful.  If hose is absent, we get an mcheck.  */
+
+	mb();
+	mb();
+	draina();
+	wrmces(7);
+
+	mcheck_expected(cpu) = 2;	/* indicates probing */
+	mcheck_taken(cpu) = 0;
+	mcheck_extra(cpu) = mid;
+	mb();
+
+	/* Access the bus revision word. */
+	pci_rev = *(vuip)MCPCIA_REV(mid);
+
+	mb();
+	mb();  /* magic */
+	if (mcheck_taken(cpu)) {
+		mcheck_taken(cpu) = 0;
+		pci_rev = 0xffffffff;
+		mb();
+	}
+	mcheck_expected(cpu) = 0;
+	mb();
+
+	return (pci_rev >> 16) == PCI_CLASS_BRIDGE_HOST;
+}
+
+static void __init
+mcpcia_new_hose(int h)
+{
+	struct pci_controller *hose;
+	struct resource *io, *mem, *hae_mem;
+	int mid = MCPCIA_HOSE2MID(h);
+
+	hose = alloc_pci_controller();
+	if (h == 0)
+		pci_isa_hose = hose;
+	io = alloc_resource();
+	mem = alloc_resource();
+	hae_mem = alloc_resource();
+			
+	hose->io_space = io;
+	hose->mem_space = hae_mem;
+	hose->sparse_mem_base = MCPCIA_SPARSE(mid) - IDENT_ADDR;
+	hose->dense_mem_base = MCPCIA_DENSE(mid) - IDENT_ADDR;
+	hose->sparse_io_base = MCPCIA_IO(mid) - IDENT_ADDR;
+	hose->dense_io_base = 0;
+	hose->config_space_base = MCPCIA_CONF(mid);
+	hose->index = h;
+
+	io->start = MCPCIA_IO(mid) - MCPCIA_IO_BIAS;
+	io->end = io->start + 0xffff;
+	io->name = pci_io_names[h];
+	io->flags = IORESOURCE_IO;
+
+	mem->start = MCPCIA_DENSE(mid) - MCPCIA_MEM_BIAS;
+	mem->end = mem->start + 0xffffffff;
+	mem->name = pci_mem_names[h];
+	mem->flags = IORESOURCE_MEM;
+
+	hae_mem->start = mem->start;
+	hae_mem->end = mem->start + MCPCIA_MEM_MASK;
+	hae_mem->name = pci_hae0_name;
+	hae_mem->flags = IORESOURCE_MEM;
+
+	if (request_resource(&ioport_resource, io) < 0)
+		printk(KERN_ERR "Failed to request IO on hose %d\n", h);
+	if (request_resource(&iomem_resource, mem) < 0)
+		printk(KERN_ERR "Failed to request MEM on hose %d\n", h);
+	if (request_resource(mem, hae_mem) < 0)
+		printk(KERN_ERR "Failed to request HAE_MEM on hose %d\n", h);
+}
+
+static void
+mcpcia_pci_clr_err(int mid)
+{
+	*(vuip)MCPCIA_CAP_ERR(mid);
+	*(vuip)MCPCIA_CAP_ERR(mid) = 0xffffffff;   /* Clear them all.  */
+	mb();
+	*(vuip)MCPCIA_CAP_ERR(mid);  /* Re-read for force write.  */
+}
+
+static void __init
+mcpcia_startup_hose(struct pci_controller *hose)
+{
+	int mid = MCPCIA_HOSE2MID(hose->index);
+	unsigned int tmp;
+
+	mcpcia_pci_clr_err(mid);
+
+	/* 
+	 * Set up error reporting.
+	 */
+	tmp = *(vuip)MCPCIA_CAP_ERR(mid);
+	tmp |= 0x0006;		/* master/target abort */
+	*(vuip)MCPCIA_CAP_ERR(mid) = tmp;
+	mb();
+	tmp = *(vuip)MCPCIA_CAP_ERR(mid);
+
+	/*
+	 * Set up the PCI->physical memory translation windows.
+	 *
+	 * Window 0 is scatter-gather 8MB at 8MB (for isa)
+	 * Window 1 is scatter-gather (up to) 1GB at 1GB (for pci)
+	 * Window 2 is direct access 2GB at 2GB
+	 */
+	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
+				       SMP_CACHE_BYTES);
+	hose->sg_pci = iommu_arena_new(hose, 0x40000000,
+				       size_for_memory(0x40000000),
+				       SMP_CACHE_BYTES);
+
+	__direct_map_base = 0x80000000;
+	__direct_map_size = 0x80000000;
+
+	*(vuip)MCPCIA_W0_BASE(mid) = hose->sg_isa->dma_base | 3;
+	*(vuip)MCPCIA_W0_MASK(mid) = (hose->sg_isa->size - 1) & 0xfff00000;
+	*(vuip)MCPCIA_T0_BASE(mid) = virt_to_phys(hose->sg_isa->ptes) >> 8;
+
+	*(vuip)MCPCIA_W1_BASE(mid) = hose->sg_pci->dma_base | 3;
+	*(vuip)MCPCIA_W1_MASK(mid) = (hose->sg_pci->size - 1) & 0xfff00000;
+	*(vuip)MCPCIA_T1_BASE(mid) = virt_to_phys(hose->sg_pci->ptes) >> 8;
+
+	*(vuip)MCPCIA_W2_BASE(mid) = __direct_map_base | 1;
+	*(vuip)MCPCIA_W2_MASK(mid) = (__direct_map_size - 1) & 0xfff00000;
+	*(vuip)MCPCIA_T2_BASE(mid) = 0;
+
+	*(vuip)MCPCIA_W3_BASE(mid) = 0x0;
+
+	mcpcia_pci_tbi(hose, 0, -1);
+
+	*(vuip)MCPCIA_HBASE(mid) = 0x0;
+	mb();
+
+	*(vuip)MCPCIA_HAE_MEM(mid) = 0U;
+	mb();
+	*(vuip)MCPCIA_HAE_MEM(mid); /* read it back. */
+	*(vuip)MCPCIA_HAE_IO(mid) = 0;
+	mb();
+	*(vuip)MCPCIA_HAE_IO(mid);  /* read it back. */
+}
+
+void __init
+mcpcia_init_arch(void)
+{
+	/* With multiple PCI busses, we play with I/O as physical addrs.  */
+	ioport_resource.end = ~0UL;
+
+	/* Allocate hose 0.  That's the one that all the ISA junk hangs
+	   off of, from which we'll be registering stuff here in a bit.
+	   Other hose detection is done in mcpcia_init_hoses, which is
+	   called from init_IRQ.  */
+
+	mcpcia_new_hose(0);
+}
+
+/* This is called from init_IRQ, since we cannot take interrupts
+   before then.  Which means we cannot do this in init_arch.  */
+
+void __init
+mcpcia_init_hoses(void)
+{
+	struct pci_controller *hose;
+	int hose_count;
+	int h;
+
+	/* First, find how many hoses we have.  */
+	hose_count = 0;
+	for (h = 0; h < MCPCIA_MAX_HOSES; ++h) {
+		if (mcpcia_probe_hose(h)) {
+			if (h != 0)
+				mcpcia_new_hose(h);
+			hose_count++;
+		}
+	}
+
+	printk("mcpcia_init_hoses: found %d hoses\n", hose_count);
+
+	/* Now do init for each hose.  */
+	for (hose = hose_head; hose; hose = hose->next)
+		mcpcia_startup_hose(hose);
+}
+
+static void
+mcpcia_print_uncorrectable(struct el_MCPCIA_uncorrected_frame_mcheck *logout)
+{
+	struct el_common_EV5_uncorrectable_mcheck *frame;
+	int i;
+
+	frame = &logout->procdata;
+
+	/* Print PAL fields */
+	for (i = 0; i < 24; i += 2) {
+		printk("  paltmp[%d-%d] = %16lx %16lx\n",
+		       i, i+1, frame->paltemp[i], frame->paltemp[i+1]);
+	}
+	for (i = 0; i < 8; i += 2) {
+		printk("  shadow[%d-%d] = %16lx %16lx\n",
+		       i, i+1, frame->shadow[i], 
+		       frame->shadow[i+1]);
+	}
+	printk("  Addr of excepting instruction  = %16lx\n",
+	       frame->exc_addr);
+	printk("  Summary of arithmetic traps    = %16lx\n",
+	       frame->exc_sum);
+	printk("  Exception mask                 = %16lx\n",
+	       frame->exc_mask);
+	printk("  Base address for PALcode       = %16lx\n",
+	       frame->pal_base);
+	printk("  Interrupt Status Reg           = %16lx\n",
+	       frame->isr);
+	printk("  CURRENT SETUP OF EV5 IBOX      = %16lx\n",
+	       frame->icsr);
+	printk("  I-CACHE Reg %s parity error   = %16lx\n",
+	       (frame->ic_perr_stat & 0x800L) ? 
+	       "Data" : "Tag", 
+	       frame->ic_perr_stat); 
+	printk("  D-CACHE error Reg              = %16lx\n",
+	       frame->dc_perr_stat);
+	if (frame->dc_perr_stat & 0x2) {
+		switch (frame->dc_perr_stat & 0x03c) {
+		case 8:
+			printk("    Data error in bank 1\n");
+			break;
+		case 4:
+			printk("    Data error in bank 0\n");
+			break;
+		case 20:
+			printk("    Tag error in bank 1\n");
+			break;
+		case 10:
+			printk("    Tag error in bank 0\n");
+			break;
+		}
+	}
+	printk("  Effective VA                   = %16lx\n",
+	       frame->va);
+	printk("  Reason for D-stream            = %16lx\n",
+	       frame->mm_stat);
+	printk("  EV5 SCache address             = %16lx\n",
+	       frame->sc_addr);
+	printk("  EV5 SCache TAG/Data parity     = %16lx\n",
+	       frame->sc_stat);
+	printk("  EV5 BC_TAG_ADDR                = %16lx\n",
+	       frame->bc_tag_addr);
+	printk("  EV5 EI_ADDR: Phys addr of Xfer = %16lx\n",
+	       frame->ei_addr);
+	printk("  Fill Syndrome                  = %16lx\n",
+	       frame->fill_syndrome);
+	printk("  EI_STAT reg                    = %16lx\n",
+	       frame->ei_stat);
+	printk("  LD_LOCK                        = %16lx\n",
+	       frame->ld_lock);
+}
+
+static void
+mcpcia_print_system_area(unsigned long la_ptr)
+{
+	struct el_common *frame;
+	struct pci_controller *hose;
+
+	struct IOD_subpacket {
+	  unsigned long base;
+	  unsigned int whoami;
+	  unsigned int rsvd1;
+	  unsigned int pci_rev;
+	  unsigned int cap_ctrl;
+	  unsigned int hae_mem;
+	  unsigned int hae_io;
+	  unsigned int int_ctl;
+	  unsigned int int_reg;
+	  unsigned int int_mask0;
+	  unsigned int int_mask1;
+	  unsigned int mc_err0;
+	  unsigned int mc_err1;
+	  unsigned int cap_err;
+	  unsigned int rsvd2;
+	  unsigned int pci_err1;
+	  unsigned int mdpa_stat;
+	  unsigned int mdpa_syn;
+	  unsigned int mdpb_stat;
+	  unsigned int mdpb_syn;
+	  unsigned int rsvd3;
+	  unsigned int rsvd4;
+	  unsigned int rsvd5;
+	} *iodpp;
+
+	frame = (struct el_common *)la_ptr;
+	iodpp = (struct IOD_subpacket *) (la_ptr + frame->sys_offset);
+
+	for (hose = hose_head; hose; hose = hose->next, iodpp++) {
+
+	  printk("IOD %d Register Subpacket - Bridge Base Address %16lx\n",
+		 hose->index, iodpp->base);
+	  printk("  WHOAMI      = %8x\n", iodpp->whoami);
+	  printk("  PCI_REV     = %8x\n", iodpp->pci_rev);
+	  printk("  CAP_CTRL    = %8x\n", iodpp->cap_ctrl);
+	  printk("  HAE_MEM     = %8x\n", iodpp->hae_mem);
+	  printk("  HAE_IO      = %8x\n", iodpp->hae_io);
+	  printk("  INT_CTL     = %8x\n", iodpp->int_ctl);
+	  printk("  INT_REG     = %8x\n", iodpp->int_reg);
+	  printk("  INT_MASK0   = %8x\n", iodpp->int_mask0);
+	  printk("  INT_MASK1   = %8x\n", iodpp->int_mask1);
+	  printk("  MC_ERR0     = %8x\n", iodpp->mc_err0);
+	  printk("  MC_ERR1     = %8x\n", iodpp->mc_err1);
+	  printk("  CAP_ERR     = %8x\n", iodpp->cap_err);
+	  printk("  PCI_ERR1    = %8x\n", iodpp->pci_err1);
+	  printk("  MDPA_STAT   = %8x\n", iodpp->mdpa_stat);
+	  printk("  MDPA_SYN    = %8x\n", iodpp->mdpa_syn);
+	  printk("  MDPB_STAT   = %8x\n", iodpp->mdpb_stat);
+	  printk("  MDPB_SYN    = %8x\n", iodpp->mdpb_syn);
+	}
+}
+
+void
+mcpcia_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout;
+	unsigned int cpu = smp_processor_id();
+	int expected;
+
+	mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr;
+	expected = mcheck_expected(cpu);
+
+	mb();
+	mb();  /* magic */
+	draina();
+
+	switch (expected) {
+	case 0:
+	    {
+		/* FIXME: how do we figure out which hose the
+		   error was on?  */	
+		struct pci_controller *hose;
+		for (hose = hose_head; hose; hose = hose->next)
+			mcpcia_pci_clr_err(MCPCIA_HOSE2MID(hose->index));
+		break;
+	    }
+	case 1:
+		mcpcia_pci_clr_err(mcheck_extra(cpu));
+		break;
+	default:
+		/* Otherwise, we're being called from mcpcia_probe_hose
+		   and there's no hose clear an error from.  */
+		break;
+	}
+
+	wrmces(0x7);
+	mb();
+
+	process_mcheck_info(vector, la_ptr, "MCPCIA", expected != 0);
+	if (!expected && vector != 0x620 && vector != 0x630) {
+		mcpcia_print_uncorrectable(mchk_logout);
+		mcpcia_print_system_area(la_ptr);
+	}
+}
diff --git a/arch/alpha/kernel/core_polaris.c b/arch/alpha/kernel/core_polaris.c
new file mode 100644
index 0000000000..75d622d96f
--- /dev/null
+++ b/arch/alpha/kernel/core_polaris.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *      linux/arch/alpha/kernel/core_polaris.c
+ *
+ * POLARIS chip-specific code
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_polaris.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG_CFG(args)	printk args
+#else
+# define DBG_CFG(args)
+#endif
+
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address.  This is fairly straightforward
+ * on POLARIS, since the chip itself generates Type 0 or Type 1
+ * cycles automatically depending on the bus number (Bus 0 is
+ * hardwired to Type 0, all others are Type 1.  Peer bridges
+ * are not supported).
+ *
+ * All types:
+ *
+ *  3 3 3 3|3 3 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |1|1|1|1|1|0|0|1|1|1|1|1|1|1|1|0|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|x|x|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., scsi and ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, u8 *type1)
+{
+	u8 bus = pbus->number;
+
+	*type1 = (bus == 0) ? 0 : 1;
+	*pci_addr = (bus << 16) | (device_fn << 8) | (where) |
+		    POLARIS_DENSE_CONFIG_BASE;
+
+        DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
+                 " returning address 0x%p\n"
+                 bus, device_fn, where, *pci_addr));
+
+	return 0;
+}
+
+static int
+polaris_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 *value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+                return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		*value = __kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		*value = __kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*value = *(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int 
+polaris_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+                return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		__kernel_stb(value, *(vucp)addr);
+		mb();
+		__kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		__kernel_stw(value, *(vusp)addr);
+		mb();
+		__kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*(vuip)addr = value;
+		mb();
+		*(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops polaris_pci_ops = 
+{
+	.read =		polaris_read_config,
+	.write =	polaris_write_config,
+};
+
+void __init
+polaris_init_arch(void)
+{
+	struct pci_controller *hose;
+
+	/* May need to initialize error reporting (see PCICTL0/1), but
+	 * for now assume that the firmware has done the right thing
+	 * already.
+	 */
+#if 0
+	printk("polaris_init_arch(): trusting firmware for setup\n");
+#endif
+
+	/*
+	 * Create our single hose.
+	 */
+
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hose->mem_space = &iomem_resource;
+	hose->index = 0;
+
+	hose->sparse_mem_base = 0;
+	hose->dense_mem_base = POLARIS_DENSE_MEM_BASE - IDENT_ADDR;
+	hose->sparse_io_base = 0;
+	hose->dense_io_base = POLARIS_DENSE_IO_BASE - IDENT_ADDR;
+
+	hose->sg_isa = hose->sg_pci = NULL;
+
+	/* The I/O window is fixed at 2G @ 2G.  */
+	__direct_map_base = 0x80000000;
+	__direct_map_size = 0x80000000;
+}
+
+static inline void
+polaris_pci_clr_err(void)
+{
+	*(vusp)POLARIS_W_STATUS;
+	/* Write 1's to settable bits to clear errors */
+	*(vusp)POLARIS_W_STATUS = 0x7800;
+	mb();
+	*(vusp)POLARIS_W_STATUS;
+}
+
+void
+polaris_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	/* Clear the error before any reporting.  */
+	mb();
+	mb();
+	draina();
+	polaris_pci_clr_err();
+	wrmces(0x7);
+	mb();
+
+	process_mcheck_info(vector, la_ptr, "POLARIS",
+			    mcheck_expected(0));
+}
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
new file mode 100644
index 0000000000..98d5b6ff8a
--- /dev/null
+++ b/arch/alpha/kernel/core_t2.c
@@ -0,0 +1,624 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_t2.c
+ *
+ * Written by Jay A Estabrook (jestabro@amt.tay1.dec.com).
+ * December 1996.
+ *
+ * based on CIA code by David A Rusling (david.rusling@reo.mts.dec.com)
+ *
+ * Code common to all T2 core logic chips.
+ */
+
+#define __EXTERN_INLINE
+#include <asm/io.h>
+#include <asm/core_t2.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/delay.h>
+#include <asm/mce.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/* For dumping initial DMA window settings. */
+#define DEBUG_PRINT_INITIAL_SETTINGS 0
+
+/* For dumping final DMA window settings. */
+#define DEBUG_PRINT_FINAL_SETTINGS 0
+
+/*
+ * By default, we direct-map starting at 2GB, in order to allow the
+ * maximum size direct-map window (2GB) to match the maximum amount of
+ * memory (2GB) that can be present on SABLEs. But that limits the
+ * floppy to DMA only via the scatter/gather window set up for 8MB
+ * ISA DMA, since the maximum ISA DMA address is 2GB-1.
+ *
+ * For now, this seems a reasonable trade-off: even though most SABLEs
+ * have less than 1GB of memory, floppy usage/performance will not
+ * really be affected by forcing it to go via scatter/gather...
+ */
+#define T2_DIRECTMAP_2G 1
+
+#if T2_DIRECTMAP_2G
+# define T2_DIRECTMAP_START	0x80000000UL
+# define T2_DIRECTMAP_LENGTH	0x80000000UL
+#else
+# define T2_DIRECTMAP_START	0x40000000UL
+# define T2_DIRECTMAP_LENGTH	0x40000000UL
+#endif
+
+/* The ISA scatter/gather window settings. */
+#define T2_ISA_SG_START		0x00800000UL
+#define T2_ISA_SG_LENGTH	0x00800000UL
+
+/*
+ * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
+ * One plausible explanation is that the i/o controller does not properly
+ * handle the system transaction.  Another involves timing.  Ho hum.
+ */
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG(args)	printk args
+#else
+# define DBG(args)
+#endif
+
+static volatile unsigned int t2_mcheck_any_expected;
+static volatile unsigned int t2_mcheck_last_taken;
+
+/* Place to save the DMA Window registers as set up by SRM
+   for restoration during shutdown. */
+static struct
+{
+	struct {
+		unsigned long wbase;
+		unsigned long wmask;
+		unsigned long tbase;
+	} window[2];
+	unsigned long hae_1;
+  	unsigned long hae_2;
+	unsigned long hae_3;
+	unsigned long hae_4;
+	unsigned long hbase;
+} t2_saved_config __attribute((common));
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address and setup the T2_HAXR2 register
+ * accordingly.  It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Type 0:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:11	Device select bit.
+ * 	10:8	Function number
+ * 	 7:2	Register number
+ *
+ * Type 1:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:24	reserved
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, unsigned char *type1)
+{
+	unsigned long addr;
+	u8 bus = pbus->number;
+
+	DBG(("mk_conf_addr(bus=%d, dfn=0x%x, where=0x%x,"
+	     " addr=0x%lx, type1=0x%x)\n",
+	     bus, device_fn, where, pci_addr, type1));
+
+	if (bus == 0) {
+		int device = device_fn >> 3;
+
+		/* Type 0 configuration cycle.  */
+
+		if (device > 8) {
+			DBG(("mk_conf_addr: device (%d)>20, returning -1\n",
+			     device));
+			return -1;
+		}
+
+		*type1 = 0;
+		addr = (0x0800L << device) | ((device_fn & 7) << 8) | (where);
+	} else {
+		/* Type 1 configuration cycle.  */
+		*type1 = 1;
+		addr = (bus << 16) | (device_fn << 8) | (where);
+	}
+	*pci_addr = addr;
+	DBG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return 0;
+}
+
+/*
+ * NOTE: both conf_read() and conf_write() may set HAE_3 when needing
+ *       to do type1 access. This is protected by the use of spinlock IRQ
+ *       primitives in the wrapper functions pci_{read,write}_config_*()
+ *       defined in drivers/pci/pci.c.
+ */
+static unsigned int
+conf_read(unsigned long addr, unsigned char type1)
+{
+	unsigned int value, cpu, taken;
+	unsigned long t2_cfg = 0;
+
+	cpu = smp_processor_id();
+
+	DBG(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
+
+	/* If Type1 access, must set T2 CFG.  */
+	if (type1) {
+		t2_cfg = *(vulp)T2_HAE_3 & ~0xc0000000UL;
+		*(vulp)T2_HAE_3 = 0x40000000UL | t2_cfg;
+		mb();
+	}
+	mb();
+	draina();
+
+	mcheck_expected(cpu) = 1;
+	mcheck_taken(cpu) = 0;
+	t2_mcheck_any_expected |= (1 << cpu);
+	mb();
+
+	/* Access configuration space. */
+	value = *(vuip)addr;
+	mb();
+	mb();  /* magic */
+
+	/* Wait for possible mcheck. Also, this lets other CPUs clear
+	   their mchecks as well, as they can reliably tell when
+	   another CPU is in the midst of handling a real mcheck via
+	   the "taken" function. */
+	udelay(100);
+
+	if ((taken = mcheck_taken(cpu))) {
+		mcheck_taken(cpu) = 0;
+		t2_mcheck_last_taken |= (1 << cpu);
+		value = 0xffffffffU;
+		mb();
+	}
+	mcheck_expected(cpu) = 0;
+	t2_mcheck_any_expected = 0;
+	mb();
+
+	/* If Type1 access, must reset T2 CFG so normal IO space ops work.  */
+	if (type1) {
+		*(vulp)T2_HAE_3 = t2_cfg;
+		mb();
+	}
+
+	return value;
+}
+
+static void
+conf_write(unsigned long addr, unsigned int value, unsigned char type1)
+{
+	unsigned int cpu, taken;
+	unsigned long t2_cfg = 0;
+
+	cpu = smp_processor_id();
+
+	/* If Type1 access, must set T2 CFG.  */
+	if (type1) {
+		t2_cfg = *(vulp)T2_HAE_3 & ~0xc0000000UL;
+		*(vulp)T2_HAE_3 = t2_cfg | 0x40000000UL;
+		mb();
+	}
+	mb();
+	draina();
+
+	mcheck_expected(cpu) = 1;
+	mcheck_taken(cpu) = 0;
+	t2_mcheck_any_expected |= (1 << cpu);
+	mb();
+
+	/* Access configuration space.  */
+	*(vuip)addr = value;
+	mb();
+	mb();  /* magic */
+
+	/* Wait for possible mcheck. Also, this lets other CPUs clear
+	   their mchecks as well, as they can reliably tell when
+	   this CPU is in the midst of handling a real mcheck via
+	   the "taken" function. */
+	udelay(100);
+
+	if ((taken = mcheck_taken(cpu))) {
+		mcheck_taken(cpu) = 0;
+		t2_mcheck_last_taken |= (1 << cpu);
+		mb();
+	}
+	mcheck_expected(cpu) = 0;
+	t2_mcheck_any_expected = 0;
+	mb();
+
+	/* If Type1 access, must reset T2 CFG so normal IO space ops work.  */
+	if (type1) {
+		*(vulp)T2_HAE_3 = t2_cfg;
+		mb();
+	}
+}
+
+static int
+t2_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+	       int size, u32 *value)
+{
+	unsigned long addr, pci_addr;
+	unsigned char type1;
+	int shift;
+	long mask;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	shift = (where & 3) * 8;
+	addr = (pci_addr << 5) + mask + T2_CONF;
+	*value = conf_read(addr, type1) >> (shift);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int 
+t2_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+		u32 value)
+{
+	unsigned long addr, pci_addr;
+	unsigned char type1;
+	long mask;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	addr = (pci_addr << 5) + mask + T2_CONF;
+	conf_write(addr, value << ((where & 3) * 8), type1);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops t2_pci_ops = 
+{
+	.read =		t2_read_config,
+	.write =	t2_write_config,
+};
+
+static void __init
+t2_direct_map_window1(unsigned long base, unsigned long length)
+{
+	unsigned long temp;
+
+	__direct_map_base = base;
+	__direct_map_size = length;
+
+	temp = (base & 0xfff00000UL) | ((base + length - 1) >> 20);
+	*(vulp)T2_WBASE1 = temp | 0x80000UL; /* OR in ENABLE bit */
+	temp = (length - 1) & 0xfff00000UL;
+	*(vulp)T2_WMASK1 = temp;
+	*(vulp)T2_TBASE1 = 0;
+
+#if DEBUG_PRINT_FINAL_SETTINGS
+	printk("%s: setting WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n",
+	       __func__, *(vulp)T2_WBASE1, *(vulp)T2_WMASK1, *(vulp)T2_TBASE1);
+#endif
+}
+
+static void __init
+t2_sg_map_window2(struct pci_controller *hose,
+		  unsigned long base,
+		  unsigned long length)
+{
+	unsigned long temp;
+
+	/* Note we can only do 1 SG window, as the other is for direct, so
+	   do an ISA SG area, especially for the floppy. */
+	hose->sg_isa = iommu_arena_new(hose, base, length, SMP_CACHE_BYTES);
+	hose->sg_pci = NULL;
+
+	temp = (base & 0xfff00000UL) | ((base + length - 1) >> 20);
+	*(vulp)T2_WBASE2 = temp | 0xc0000UL; /* OR in ENABLE/SG bits */
+	temp = (length - 1) & 0xfff00000UL;
+	*(vulp)T2_WMASK2 = temp;
+	*(vulp)T2_TBASE2 = virt_to_phys(hose->sg_isa->ptes) >> 1;
+	mb();
+
+	t2_pci_tbi(hose, 0, -1); /* flush TLB all */
+
+#if DEBUG_PRINT_FINAL_SETTINGS
+	printk("%s: setting WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n",
+	       __func__, *(vulp)T2_WBASE2, *(vulp)T2_WMASK2, *(vulp)T2_TBASE2);
+#endif
+}
+
+static void __init
+t2_save_configuration(void)
+{
+#if DEBUG_PRINT_INITIAL_SETTINGS
+	printk("%s: HAE_1 was 0x%lx\n", __func__, srm_hae); /* HW is 0 */
+	printk("%s: HAE_2 was 0x%lx\n", __func__, *(vulp)T2_HAE_2);
+	printk("%s: HAE_3 was 0x%lx\n", __func__, *(vulp)T2_HAE_3);
+	printk("%s: HAE_4 was 0x%lx\n", __func__, *(vulp)T2_HAE_4);
+	printk("%s: HBASE was 0x%lx\n", __func__, *(vulp)T2_HBASE);
+
+	printk("%s: WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n", __func__,
+	       *(vulp)T2_WBASE1, *(vulp)T2_WMASK1, *(vulp)T2_TBASE1);
+	printk("%s: WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n", __func__,
+	       *(vulp)T2_WBASE2, *(vulp)T2_WMASK2, *(vulp)T2_TBASE2);
+#endif
+
+	/*
+	 * Save the DMA Window registers.
+	 */
+	t2_saved_config.window[0].wbase = *(vulp)T2_WBASE1;
+	t2_saved_config.window[0].wmask = *(vulp)T2_WMASK1;
+	t2_saved_config.window[0].tbase = *(vulp)T2_TBASE1;
+	t2_saved_config.window[1].wbase = *(vulp)T2_WBASE2;
+	t2_saved_config.window[1].wmask = *(vulp)T2_WMASK2;
+	t2_saved_config.window[1].tbase = *(vulp)T2_TBASE2;
+
+	t2_saved_config.hae_1 = srm_hae; /* HW is already set to 0 */
+	t2_saved_config.hae_2 = *(vulp)T2_HAE_2;
+	t2_saved_config.hae_3 = *(vulp)T2_HAE_3;
+	t2_saved_config.hae_4 = *(vulp)T2_HAE_4;
+	t2_saved_config.hbase = *(vulp)T2_HBASE;
+}
+
+void __init
+t2_init_arch(void)
+{
+	struct pci_controller *hose;
+	struct resource *hae_mem;
+	unsigned long temp;
+	unsigned int i;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		mcheck_expected(i) = 0;
+		mcheck_taken(i) = 0;
+	}
+	t2_mcheck_any_expected = 0;
+	t2_mcheck_last_taken = 0;
+
+	/* Enable scatter/gather TLB use.  */
+	temp = *(vulp)T2_IOCSR;
+	if (!(temp & (0x1UL << 26))) {
+		printk("t2_init_arch: enabling SG TLB, IOCSR was 0x%lx\n",
+		       temp);
+		*(vulp)T2_IOCSR = temp | (0x1UL << 26);
+		mb();	
+		*(vulp)T2_IOCSR; /* read it back to make sure */
+	}
+
+	t2_save_configuration();
+
+	/*
+	 * Create our single hose.
+	 */
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hae_mem = alloc_resource();
+	hae_mem->start = 0;
+	hae_mem->end = T2_MEM_R1_MASK;
+	hae_mem->name = pci_hae0_name;
+	if (request_resource(&iomem_resource, hae_mem) < 0)
+		printk(KERN_ERR "Failed to request HAE_MEM\n");
+	hose->mem_space = hae_mem;
+	hose->index = 0;
+
+	hose->sparse_mem_base = T2_SPARSE_MEM - IDENT_ADDR;
+	hose->dense_mem_base = T2_DENSE_MEM - IDENT_ADDR;
+	hose->sparse_io_base = T2_IO - IDENT_ADDR;
+	hose->dense_io_base = 0;
+
+	/*
+	 * Set up the PCI->physical memory translation windows.
+	 *
+	 * Window 1 is direct mapped.
+	 * Window 2 is scatter/gather (for ISA).
+	 */
+
+	t2_direct_map_window1(T2_DIRECTMAP_START, T2_DIRECTMAP_LENGTH);
+
+	/* Always make an ISA DMA window. */
+	t2_sg_map_window2(hose, T2_ISA_SG_START, T2_ISA_SG_LENGTH);
+
+	*(vulp)T2_HBASE = 0x0; /* Disable HOLES. */
+
+	/* Zero HAE.  */
+	*(vulp)T2_HAE_1 = 0; mb(); /* Sparse MEM HAE */
+	*(vulp)T2_HAE_2 = 0; mb(); /* Sparse I/O HAE */
+	*(vulp)T2_HAE_3 = 0; mb(); /* Config Space HAE */
+
+	/*
+	 * We also now zero out HAE_4, the dense memory HAE, so that
+	 * we need not account for its "offset" when accessing dense
+	 * memory resources which we allocated in our normal way. This
+	 * HAE would need to stay untouched were we to keep the SRM
+	 * resource settings.
+	 *
+	 * Thus we can now run standard X servers on SABLE/LYNX. :-)
+	 */
+	*(vulp)T2_HAE_4 = 0; mb();
+}
+
+void
+t2_kill_arch(int mode)
+{
+	/*
+	 * Restore the DMA Window registers.
+	 */
+	*(vulp)T2_WBASE1 = t2_saved_config.window[0].wbase;
+	*(vulp)T2_WMASK1 = t2_saved_config.window[0].wmask;
+	*(vulp)T2_TBASE1 = t2_saved_config.window[0].tbase;
+	*(vulp)T2_WBASE2 = t2_saved_config.window[1].wbase;
+	*(vulp)T2_WMASK2 = t2_saved_config.window[1].wmask;
+	*(vulp)T2_TBASE2 = t2_saved_config.window[1].tbase;
+	mb();
+
+	*(vulp)T2_HAE_1 = srm_hae;
+	*(vulp)T2_HAE_2 = t2_saved_config.hae_2;
+	*(vulp)T2_HAE_3 = t2_saved_config.hae_3;
+	*(vulp)T2_HAE_4 = t2_saved_config.hae_4;
+	*(vulp)T2_HBASE = t2_saved_config.hbase;
+	mb();
+	*(vulp)T2_HBASE; /* READ it back to ensure WRITE occurred. */
+}
+
+void
+t2_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	unsigned long t2_iocsr;
+
+	t2_iocsr = *(vulp)T2_IOCSR;
+
+	/* set the TLB Clear bit */
+	*(vulp)T2_IOCSR = t2_iocsr | (0x1UL << 28);
+	mb();
+	*(vulp)T2_IOCSR; /* read it back to make sure */
+
+	/* clear the TLB Clear bit */
+	*(vulp)T2_IOCSR = t2_iocsr & ~(0x1UL << 28);
+	mb();
+	*(vulp)T2_IOCSR; /* read it back to make sure */
+}
+
+#define SIC_SEIC (1UL << 33)    /* System Event Clear */
+
+static void
+t2_clear_errors(int cpu)
+{
+	struct sable_cpu_csr *cpu_regs;
+
+	cpu_regs = (struct sable_cpu_csr *)T2_CPUn_BASE(cpu);
+		
+	cpu_regs->sic &= ~SIC_SEIC;
+
+	/* Clear CPU errors.  */
+	cpu_regs->bcce |= cpu_regs->bcce;
+	cpu_regs->cbe  |= cpu_regs->cbe;
+	cpu_regs->bcue |= cpu_regs->bcue;
+	cpu_regs->dter |= cpu_regs->dter;
+
+	*(vulp)T2_CERR1 |= *(vulp)T2_CERR1;
+	*(vulp)T2_PERR1 |= *(vulp)T2_PERR1;
+
+	mb();
+	mb();  /* magic */
+}
+
+/*
+ * SABLE seems to have a "broadcast" style machine check, in that all
+ * CPUs receive it. And, the issuing CPU, in the case of PCI Config
+ * space read/write faults, will also receive a second mcheck, upon
+ * lowering IPL during completion processing in pci_read_config_byte()
+ * et al.
+ *
+ * Hence all the taken/expected/any_expected/last_taken stuff...
+ */
+void
+t2_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	int cpu = smp_processor_id();
+#ifdef CONFIG_VERBOSE_MCHECK
+	struct el_common *mchk_header = (struct el_common *)la_ptr;
+#endif
+
+	/* Clear the error before any reporting.  */
+	mb();
+	mb();  /* magic */
+	draina();
+	t2_clear_errors(cpu);
+
+	/* This should not actually be done until the logout frame is
+	   examined, but, since we don't do that, go on and do this... */
+	wrmces(0x7);
+	mb();
+
+	/* Now, do testing for the anomalous conditions. */
+	if (!mcheck_expected(cpu) && t2_mcheck_any_expected) {
+		/*
+		 * FUNKY: Received mcheck on a CPU and not
+		 * expecting it, but another CPU is expecting one.
+		 *
+		 * Just dismiss it for now on this CPU...
+		 */
+#ifdef CONFIG_VERBOSE_MCHECK
+		if (alpha_verbose_mcheck > 1) {
+			printk("t2_machine_check(cpu%d): any_expected 0x%x -"
+			       " (assumed) spurious -"
+			       " code 0x%x\n", cpu, t2_mcheck_any_expected,
+			       (unsigned int)mchk_header->code);
+		}
+#endif
+		return;
+	}
+
+	if (!mcheck_expected(cpu) && !t2_mcheck_any_expected) {
+		if (t2_mcheck_last_taken & (1 << cpu)) {
+#ifdef CONFIG_VERBOSE_MCHECK
+		    if (alpha_verbose_mcheck > 1) {
+			printk("t2_machine_check(cpu%d): last_taken 0x%x - "
+			       "unexpected mcheck - code 0x%x\n",
+			       cpu, t2_mcheck_last_taken,
+			       (unsigned int)mchk_header->code);
+		    }
+#endif
+		    t2_mcheck_last_taken = 0;
+		    mb();
+		    return;
+		} else {
+			t2_mcheck_last_taken = 0;
+			mb();
+		}
+	}
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		printk("%s t2_mcheck(cpu%d): last_taken 0x%x - "
+		       "any_expected 0x%x - code 0x%x\n",
+		       (mcheck_expected(cpu) ? "EX" : "UN"), cpu,
+		       t2_mcheck_last_taken, t2_mcheck_any_expected,
+		       (unsigned int)mchk_header->code);
+	}
+#endif
+
+	process_mcheck_info(vector, la_ptr, "T2", mcheck_expected(cpu));
+}
diff --git a/arch/alpha/kernel/core_titan.c b/arch/alpha/kernel/core_titan.c
new file mode 100644
index 0000000000..77f5d68ed0
--- /dev/null
+++ b/arch/alpha/kernel/core_titan.c
@@ -0,0 +1,802 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_titan.c
+ *
+ * Code common to all TITAN core logic chips.
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_titan.h>
+#undef __EXTERN_INLINE
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/memblock.h>
+
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+#include <asm/vga.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/* Save Titan configuration data as the console had it set up.  */
+
+struct
+{
+	unsigned long wsba[4];
+	unsigned long wsm[4];
+	unsigned long tba[4];
+} saved_config[4] __attribute__((common));
+
+/*
+ * Is PChip 1 present? No need to query it more than once.
+ */
+static int titan_pchip1_present;
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG_CFG(args)	printk args
+#else
+# define DBG_CFG(args)
+#endif
+
+
+/*
+ * Routines to access TIG registers.
+ */
+static inline volatile unsigned long *
+mk_tig_addr(int offset)
+{
+	return (volatile unsigned long *)(TITAN_TIG_SPACE + (offset << 6));
+}
+
+static inline u8 
+titan_read_tig(int offset, u8 value)
+{
+	volatile unsigned long *tig_addr = mk_tig_addr(offset);
+	return (u8)(*tig_addr & 0xff);
+}
+
+static inline void 
+titan_write_tig(int offset, u8 value)
+{
+	volatile unsigned long *tig_addr = mk_tig_addr(offset);
+	*tig_addr = (unsigned long)value;
+}
+
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address
+ * accordingly.  It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Note that all config space accesses use Type 1 address format.
+ *
+ * Note also that type 1 is determined by non-zero bus number.
+ *
+ * Type 1:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:24	reserved
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, unsigned char *type1)
+{
+	struct pci_controller *hose = pbus->sysdata;
+	unsigned long addr;
+	u8 bus = pbus->number;
+
+	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
+		 "pci_addr=0x%p, type1=0x%p)\n",
+		 bus, device_fn, where, pci_addr, type1));
+
+	if (!pbus->parent) /* No parent means peer PCI bus. */
+		bus = 0;
+        *type1 = (bus != 0);
+
+        addr = (bus << 16) | (device_fn << 8) | where;
+	addr |= hose->config_space_base;
+		
+	*pci_addr = addr;
+	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return 0;
+}
+
+static int
+titan_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		  int size, u32 *value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		*value = __kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		*value = __kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*value = *(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int 
+titan_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		   int size, u32 value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		__kernel_stb(value, *(vucp)addr);
+		mb();
+		__kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		__kernel_stw(value, *(vusp)addr);
+		mb();
+		__kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*(vuip)addr = value;
+		mb();
+		*(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops titan_pci_ops = 
+{
+	.read =		titan_read_config,
+	.write =	titan_write_config,
+};
+
+
+void
+titan_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	titan_pachip *pachip = 
+	  (hose->index & 1) ? TITAN_pachip1 : TITAN_pachip0;
+	titan_pachip_port *port;
+	volatile unsigned long *csr;
+	unsigned long value;
+
+	/* Get the right hose.  */
+	port = &pachip->g_port;
+	if (hose->index & 2) 
+		port = &pachip->a_port;
+
+	/* We can invalidate up to 8 tlb entries in a go.  The flush
+	   matches against <31:16> in the pci address.  
+	   Note that gtlbi* and atlbi* are in the same place in the g_port
+	   and a_port, respectively, so the g_port offset can be used
+	   even if hose is an a_port */
+	csr = &port->port_specific.g.gtlbia.csr;
+	if (((start ^ end) & 0xffff0000) == 0)
+		csr = &port->port_specific.g.gtlbiv.csr;
+
+	/* For TBIA, it doesn't matter what value we write.  For TBI, 
+	   it's the shifted tag bits.  */
+	value = (start & 0xffff0000) >> 12;
+
+	wmb();
+	*csr = value;
+	mb();
+	*csr;
+}
+
+static int
+titan_query_agp(titan_pachip_port *port)
+{
+	union TPAchipPCTL pctl;
+
+	/* set up APCTL */
+	pctl.pctl_q_whole = port->pctl.csr;
+
+	return pctl.pctl_r_bits.apctl_v_agp_present;
+
+}
+
+static void __init
+titan_init_one_pachip_port(titan_pachip_port *port, int index)
+{
+	struct pci_controller *hose;
+
+	hose = alloc_pci_controller();
+	if (index == 0)
+		pci_isa_hose = hose;
+	hose->io_space = alloc_resource();
+	hose->mem_space = alloc_resource();
+
+	/*
+	 * This is for userland consumption.  The 40-bit PIO bias that we 
+	 * use in the kernel through KSEG doesn't work in the page table 
+	 * based user mappings. (43-bit KSEG sign extends the physical
+	 * address from bit 40 to hit the I/O bit - mapped addresses don't).
+	 * So make sure we get the 43-bit PIO bias.  
+	 */
+	hose->sparse_mem_base = 0;
+	hose->sparse_io_base = 0;
+	hose->dense_mem_base
+	  = (TITAN_MEM(index) & 0xffffffffffUL) | 0x80000000000UL;
+	hose->dense_io_base
+	  = (TITAN_IO(index) & 0xffffffffffUL) | 0x80000000000UL;
+
+	hose->config_space_base = TITAN_CONF(index);
+	hose->index = index;
+
+	hose->io_space->start = TITAN_IO(index) - TITAN_IO_BIAS;
+	hose->io_space->end = hose->io_space->start + TITAN_IO_SPACE - 1;
+	hose->io_space->name = pci_io_names[index];
+	hose->io_space->flags = IORESOURCE_IO;
+
+	hose->mem_space->start = TITAN_MEM(index) - TITAN_MEM_BIAS;
+	hose->mem_space->end = hose->mem_space->start + 0xffffffff;
+	hose->mem_space->name = pci_mem_names[index];
+	hose->mem_space->flags = IORESOURCE_MEM;
+
+	if (request_resource(&ioport_resource, hose->io_space) < 0)
+		printk(KERN_ERR "Failed to request IO on hose %d\n", index);
+	if (request_resource(&iomem_resource, hose->mem_space) < 0)
+		printk(KERN_ERR "Failed to request MEM on hose %d\n", index);
+
+	/*
+	 * Save the existing PCI window translations.  SRM will 
+	 * need them when we go to reboot.
+	 */
+	saved_config[index].wsba[0] = port->wsba[0].csr;
+	saved_config[index].wsm[0]  = port->wsm[0].csr;
+	saved_config[index].tba[0]  = port->tba[0].csr;
+
+	saved_config[index].wsba[1] = port->wsba[1].csr;
+	saved_config[index].wsm[1]  = port->wsm[1].csr;
+	saved_config[index].tba[1]  = port->tba[1].csr;
+
+	saved_config[index].wsba[2] = port->wsba[2].csr;
+	saved_config[index].wsm[2]  = port->wsm[2].csr;
+	saved_config[index].tba[2]  = port->tba[2].csr;
+
+	saved_config[index].wsba[3] = port->wsba[3].csr;
+	saved_config[index].wsm[3]  = port->wsm[3].csr;
+	saved_config[index].tba[3]  = port->tba[3].csr;
+
+	/*
+	 * Set up the PCI to main memory translation windows.
+	 *
+	 * Note: Window 3 on Titan is Scatter-Gather ONLY.
+	 *
+	 * Window 0 is scatter-gather 8MB at 8MB (for isa)
+	 * Window 1 is direct access 1GB at 2GB
+	 * Window 2 is scatter-gather 1GB at 3GB
+	 */
+	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
+				       SMP_CACHE_BYTES);
+	hose->sg_isa->align_entry = 8; /* 64KB for ISA */
+
+	hose->sg_pci = iommu_arena_new(hose, 0xc0000000, 0x40000000,
+				       SMP_CACHE_BYTES);
+	hose->sg_pci->align_entry = 4; /* Titan caches 4 PTEs at a time */
+
+	port->wsba[0].csr = hose->sg_isa->dma_base | 3;
+	port->wsm[0].csr  = (hose->sg_isa->size - 1) & 0xfff00000;
+	port->tba[0].csr  = virt_to_phys(hose->sg_isa->ptes);
+
+	port->wsba[1].csr = __direct_map_base | 1;
+	port->wsm[1].csr  = (__direct_map_size - 1) & 0xfff00000;
+	port->tba[1].csr  = 0;
+
+	port->wsba[2].csr = hose->sg_pci->dma_base | 3;
+	port->wsm[2].csr  = (hose->sg_pci->size - 1) & 0xfff00000;
+	port->tba[2].csr  = virt_to_phys(hose->sg_pci->ptes);
+
+	port->wsba[3].csr = 0;
+
+	/* Enable the Monster Window to make DAC pci64 possible.  */
+	port->pctl.csr |= pctl_m_mwin;
+
+	/*
+	 * If it's an AGP port, initialize agplastwr.
+	 */
+	if (titan_query_agp(port)) 
+		port->port_specific.a.agplastwr.csr = __direct_map_base;
+
+	titan_pci_tbi(hose, 0, -1);
+}
+
+static void __init
+titan_init_pachips(titan_pachip *pachip0, titan_pachip *pachip1)
+{
+	titan_pchip1_present = TITAN_cchip->csc.csr & 1L<<14;
+
+	/* Init the ports in hose order... */
+	titan_init_one_pachip_port(&pachip0->g_port, 0);	/* hose 0 */
+	if (titan_pchip1_present)
+		titan_init_one_pachip_port(&pachip1->g_port, 1);/* hose 1 */
+	titan_init_one_pachip_port(&pachip0->a_port, 2);	/* hose 2 */
+	if (titan_pchip1_present)
+		titan_init_one_pachip_port(&pachip1->a_port, 3);/* hose 3 */
+}
+
+void __init
+titan_init_arch(void)
+{
+#if 0
+	printk("%s: titan_init_arch()\n", __func__);
+	printk("%s: CChip registers:\n", __func__);
+	printk("%s: CSR_CSC 0x%lx\n", __func__, TITAN_cchip->csc.csr);
+	printk("%s: CSR_MTR 0x%lx\n", __func__, TITAN_cchip->mtr.csr);
+	printk("%s: CSR_MISC 0x%lx\n", __func__, TITAN_cchip->misc.csr);
+	printk("%s: CSR_DIM0 0x%lx\n", __func__, TITAN_cchip->dim0.csr);
+	printk("%s: CSR_DIM1 0x%lx\n", __func__, TITAN_cchip->dim1.csr);
+	printk("%s: CSR_DIR0 0x%lx\n", __func__, TITAN_cchip->dir0.csr);
+	printk("%s: CSR_DIR1 0x%lx\n", __func__, TITAN_cchip->dir1.csr);
+	printk("%s: CSR_DRIR 0x%lx\n", __func__, TITAN_cchip->drir.csr);
+
+	printk("%s: DChip registers:\n", __func__);
+	printk("%s: CSR_DSC 0x%lx\n", __func__, TITAN_dchip->dsc.csr);
+	printk("%s: CSR_STR 0x%lx\n", __func__, TITAN_dchip->str.csr);
+	printk("%s: CSR_DREV 0x%lx\n", __func__, TITAN_dchip->drev.csr);
+#endif
+
+	boot_cpuid = __hard_smp_processor_id();
+
+	/* With multiple PCI busses, we play with I/O as physical addrs.  */
+	ioport_resource.end = ~0UL;
+	iomem_resource.end = ~0UL;
+
+	/* PCI DMA Direct Mapping is 1GB at 2GB.  */
+	__direct_map_base = 0x80000000;
+	__direct_map_size = 0x40000000;
+
+	/* Init the PA chip(s).  */
+	titan_init_pachips(TITAN_pachip0, TITAN_pachip1);
+
+	/* Check for graphic console location (if any).  */
+	find_console_vga_hose();
+}
+
+static void
+titan_kill_one_pachip_port(titan_pachip_port *port, int index)
+{
+	port->wsba[0].csr = saved_config[index].wsba[0];
+	port->wsm[0].csr  = saved_config[index].wsm[0];
+	port->tba[0].csr  = saved_config[index].tba[0];
+
+	port->wsba[1].csr = saved_config[index].wsba[1];
+	port->wsm[1].csr  = saved_config[index].wsm[1];
+	port->tba[1].csr  = saved_config[index].tba[1];
+
+	port->wsba[2].csr = saved_config[index].wsba[2];
+	port->wsm[2].csr  = saved_config[index].wsm[2];
+	port->tba[2].csr  = saved_config[index].tba[2];
+
+	port->wsba[3].csr = saved_config[index].wsba[3];
+	port->wsm[3].csr  = saved_config[index].wsm[3];
+	port->tba[3].csr  = saved_config[index].tba[3];
+}
+
+static void
+titan_kill_pachips(titan_pachip *pachip0, titan_pachip *pachip1)
+{
+	if (titan_pchip1_present) {
+		titan_kill_one_pachip_port(&pachip1->g_port, 1);
+		titan_kill_one_pachip_port(&pachip1->a_port, 3);
+	}
+	titan_kill_one_pachip_port(&pachip0->g_port, 0);
+	titan_kill_one_pachip_port(&pachip0->a_port, 2);
+}
+
+void
+titan_kill_arch(int mode)
+{
+	titan_kill_pachips(TITAN_pachip0, TITAN_pachip1);
+}
+
+
+/*
+ * IO map support.
+ */
+
+void __iomem *
+titan_ioportmap(unsigned long addr)
+{
+	FIXUP_IOADDR_VGA(addr);
+	return (void __iomem *)(addr + TITAN_IO_BIAS);
+}
+
+
+void __iomem *
+titan_ioremap(unsigned long addr, unsigned long size)
+{
+	int h = (addr & TITAN_HOSE_MASK) >> TITAN_HOSE_SHIFT;
+	unsigned long baddr = addr & ~TITAN_HOSE_MASK;
+	unsigned long last = baddr + size - 1;
+	struct pci_controller *hose;	
+	struct vm_struct *area;
+	unsigned long vaddr;
+	unsigned long *ptes;
+	unsigned long pfn;
+
+#ifdef CONFIG_VGA_HOSE
+	/*
+	 * Adjust the address and hose, if necessary.
+	 */ 
+	if (pci_vga_hose && __is_mem_vga(addr)) {
+		h = pci_vga_hose->index;
+		addr += pci_vga_hose->mem_space->start;
+	}
+#endif
+
+	/*
+	 * Find the hose.
+	 */
+	for (hose = hose_head; hose; hose = hose->next)
+		if (hose->index == h)
+			break;
+	if (!hose)
+		return NULL;
+
+	/*
+	 * Is it direct-mapped?
+	 */
+	if ((baddr >= __direct_map_base) && 
+	    ((baddr + size - 1) < __direct_map_base + __direct_map_size)) {
+		vaddr = addr - __direct_map_base + TITAN_MEM_BIAS;
+		return (void __iomem *) vaddr;
+	}
+
+	/* 
+	 * Check the scatter-gather arena.
+	 */
+	if (hose->sg_pci &&
+	    baddr >= (unsigned long)hose->sg_pci->dma_base &&
+	    last < (unsigned long)hose->sg_pci->dma_base + hose->sg_pci->size){
+
+		/*
+		 * Adjust the limits (mappings must be page aligned)
+		 */
+		baddr -= hose->sg_pci->dma_base;
+		last -= hose->sg_pci->dma_base;
+		baddr &= PAGE_MASK;
+		size = PAGE_ALIGN(last) - baddr;
+
+		/*
+		 * Map it
+		 */
+		area = get_vm_area(size, VM_IOREMAP);
+		if (!area) {
+			printk("ioremap failed... no vm_area...\n");
+			return NULL;
+		}
+
+		ptes = hose->sg_pci->ptes;
+		for (vaddr = (unsigned long)area->addr; 
+		    baddr <= last; 
+		    baddr += PAGE_SIZE, vaddr += PAGE_SIZE) {
+			pfn = ptes[baddr >> PAGE_SHIFT];
+			if (!(pfn & 1)) {
+				printk("ioremap failed... pte not valid...\n");
+				vfree(area->addr);
+				return NULL;
+			}
+			pfn >>= 1;	/* make it a true pfn */
+			
+			if (__alpha_remap_area_pages(vaddr,
+						     pfn << PAGE_SHIFT, 
+						     PAGE_SIZE, 0)) {
+				printk("FAILED to remap_area_pages...\n");
+				vfree(area->addr);
+				return NULL;
+			}
+		}
+
+		flush_tlb_all();
+
+		vaddr = (unsigned long)area->addr + (addr & ~PAGE_MASK);
+		return (void __iomem *) vaddr;
+	}
+
+	/* Assume a legacy (read: VGA) address, and return appropriately. */
+	return (void __iomem *)(addr + TITAN_MEM_BIAS);
+}
+
+void
+titan_iounmap(volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr >= VMALLOC_START)
+		vfree((void *)(PAGE_MASK & addr)); 
+}
+
+int
+titan_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+
+	if (addr >= VMALLOC_START)
+		return 1;
+	else
+		return (addr & 0x100000000UL) == 0;
+}
+
+#ifndef CONFIG_ALPHA_GENERIC
+EXPORT_SYMBOL(titan_ioportmap);
+EXPORT_SYMBOL(titan_ioremap);
+EXPORT_SYMBOL(titan_iounmap);
+EXPORT_SYMBOL(titan_is_mmio);
+#endif
+
+/*
+ * AGP GART Support.
+ */
+#include <linux/agp_backend.h>
+#include <asm/agp_backend.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+struct titan_agp_aperture {
+	struct pci_iommu_arena *arena;
+	long pg_start;
+	long pg_count;
+};
+
+static int
+titan_agp_setup(alpha_agp_info *agp)
+{
+	struct titan_agp_aperture *aper;
+
+	if (!alpha_agpgart_size)
+		return -ENOMEM;
+
+	aper = kmalloc(sizeof(struct titan_agp_aperture), GFP_KERNEL);
+	if (aper == NULL)
+		return -ENOMEM;
+
+	aper->arena = agp->hose->sg_pci;
+	aper->pg_count = alpha_agpgart_size / PAGE_SIZE;
+	aper->pg_start = iommu_reserve(aper->arena, aper->pg_count,
+				       aper->pg_count - 1);
+	if (aper->pg_start < 0) {
+		printk(KERN_ERR "Failed to reserve AGP memory\n");
+		kfree(aper);
+		return -ENOMEM;
+	}
+
+	agp->aperture.bus_base = 
+		aper->arena->dma_base + aper->pg_start * PAGE_SIZE;
+	agp->aperture.size = aper->pg_count * PAGE_SIZE;
+	agp->aperture.sysdata = aper;
+
+	return 0;
+}
+
+static void
+titan_agp_cleanup(alpha_agp_info *agp)
+{
+	struct titan_agp_aperture *aper = agp->aperture.sysdata;
+	int status;
+
+	status = iommu_release(aper->arena, aper->pg_start, aper->pg_count);
+	if (status == -EBUSY) {
+		printk(KERN_WARNING 
+		       "Attempted to release bound AGP memory - unbinding\n");
+		iommu_unbind(aper->arena, aper->pg_start, aper->pg_count);
+		status = iommu_release(aper->arena, aper->pg_start, 
+				       aper->pg_count);
+	}
+	if (status < 0)
+		printk(KERN_ERR "Failed to release AGP memory\n");
+
+	kfree(aper);
+	kfree(agp);
+}
+
+static int
+titan_agp_configure(alpha_agp_info *agp)
+{
+	union TPAchipPCTL pctl;
+	titan_pachip_port *port = agp->private;
+	pctl.pctl_q_whole = port->pctl.csr;
+
+	/* Side-Band Addressing? */
+	pctl.pctl_r_bits.apctl_v_agp_sba_en = agp->mode.bits.sba;
+
+	/* AGP Rate? */
+	pctl.pctl_r_bits.apctl_v_agp_rate = 0;		/* 1x */
+	if (agp->mode.bits.rate & 2) 
+		pctl.pctl_r_bits.apctl_v_agp_rate = 1;	/* 2x */
+#if 0
+	if (agp->mode.bits.rate & 4) 
+		pctl.pctl_r_bits.apctl_v_agp_rate = 2;	/* 4x */
+#endif
+	
+	/* RQ Depth? */
+	pctl.pctl_r_bits.apctl_v_agp_hp_rd = 2;
+	pctl.pctl_r_bits.apctl_v_agp_lp_rd = 7;
+
+	/*
+	 * AGP Enable.
+	 */
+	pctl.pctl_r_bits.apctl_v_agp_en = agp->mode.bits.enable;
+
+	/* Tell the user.  */
+	printk("Enabling AGP: %dX%s\n", 
+	       1 << pctl.pctl_r_bits.apctl_v_agp_rate,
+	       pctl.pctl_r_bits.apctl_v_agp_sba_en ? " - SBA" : "");
+	       
+	/* Write it.  */
+	port->pctl.csr = pctl.pctl_q_whole;
+	
+	/* And wait at least 5000 66MHz cycles (per Titan spec).  */
+	udelay(100);
+
+	return 0;
+}
+
+static int 
+titan_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *mem)
+{
+	struct titan_agp_aperture *aper = agp->aperture.sysdata;
+	return iommu_bind(aper->arena, aper->pg_start + pg_start, 
+			  mem->page_count, mem->pages);
+}
+
+static int 
+titan_agp_unbind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *mem)
+{
+	struct titan_agp_aperture *aper = agp->aperture.sysdata;
+	return iommu_unbind(aper->arena, aper->pg_start + pg_start,
+			    mem->page_count);
+}
+
+static unsigned long
+titan_agp_translate(alpha_agp_info *agp, dma_addr_t addr)
+{
+	struct titan_agp_aperture *aper = agp->aperture.sysdata;
+	unsigned long baddr = addr - aper->arena->dma_base;
+	unsigned long pte;
+
+	if (addr < agp->aperture.bus_base ||
+	    addr >= agp->aperture.bus_base + agp->aperture.size) {
+		printk("%s: addr out of range\n", __func__);
+		return -EINVAL;
+	}
+
+	pte = aper->arena->ptes[baddr >> PAGE_SHIFT];
+	if (!(pte & 1)) {
+		printk("%s: pte not valid\n", __func__);
+		return -EINVAL;
+	}
+
+	return (pte >> 1) << PAGE_SHIFT;
+}
+
+struct alpha_agp_ops titan_agp_ops =
+{
+	.setup		= titan_agp_setup,
+	.cleanup	= titan_agp_cleanup,
+	.configure	= titan_agp_configure,
+	.bind		= titan_agp_bind_memory,
+	.unbind		= titan_agp_unbind_memory,
+	.translate	= titan_agp_translate
+};
+
+alpha_agp_info *
+titan_agp_info(void)
+{
+	alpha_agp_info *agp;
+	struct pci_controller *hose;
+	titan_pachip_port *port;
+	int hosenum = -1;
+	union TPAchipPCTL pctl;
+
+	/*
+	 * Find the AGP port.
+	 */
+	port = &TITAN_pachip0->a_port;
+	if (titan_query_agp(port))
+		hosenum = 2;
+	if (hosenum < 0 && 
+	    titan_pchip1_present &&
+	    titan_query_agp(port = &TITAN_pachip1->a_port)) 
+		hosenum = 3;
+	
+	/*
+	 * Find the hose the port is on.
+	 */
+	for (hose = hose_head; hose; hose = hose->next)
+		if (hose->index == hosenum)
+			break;
+
+	if (!hose || !hose->sg_pci)
+		return NULL;
+
+	/*
+	 * Allocate the info structure.
+	 */
+	agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+	if (!agp)
+		return NULL;
+
+	/*
+	 * Fill it in.
+	 */
+	agp->hose = hose;
+	agp->private = port;
+	agp->ops = &titan_agp_ops;
+
+	/*
+	 * Aperture - not configured until ops.setup().
+	 *
+	 * FIXME - should we go ahead and allocate it here?
+	 */
+	agp->aperture.bus_base = 0;
+	agp->aperture.size = 0;
+	agp->aperture.sysdata = NULL;
+
+	/*
+	 * Capabilities.
+	 */
+	agp->capability.lw = 0;
+	agp->capability.bits.rate = 3; 	/* 2x, 1x */
+	agp->capability.bits.sba = 1;
+	agp->capability.bits.rq = 7;	/* 8 - 1 */
+
+	/*
+	 * Mode.
+	 */
+	pctl.pctl_q_whole = port->pctl.csr;
+	agp->mode.lw = 0;
+	agp->mode.bits.rate = 1 << pctl.pctl_r_bits.apctl_v_agp_rate;
+	agp->mode.bits.sba = pctl.pctl_r_bits.apctl_v_agp_sba_en;
+	agp->mode.bits.rq = 7;	/* RQ Depth? */
+	agp->mode.bits.enable = pctl.pctl_r_bits.apctl_v_agp_en;
+
+	return agp;
+}
diff --git a/arch/alpha/kernel/core_tsunami.c b/arch/alpha/kernel/core_tsunami.c
new file mode 100644
index 0000000000..fc1ab73f23
--- /dev/null
+++ b/arch/alpha/kernel/core_tsunami.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_tsunami.c
+ *
+ * Based on code written by David A. Rusling (david.rusling@reo.mts.dec.com).
+ *
+ * Code common to all TSUNAMI core logic chips.
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_tsunami.h>
+#undef __EXTERN_INLINE
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+#include <asm/vga.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/* Save Tsunami configuration data as the console had it set up.  */
+
+struct 
+{
+	unsigned long wsba[4];
+	unsigned long wsm[4];
+	unsigned long tba[4];
+} saved_config[2] __attribute__((common));
+
+/*
+ * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
+ * One plausible explanation is that the I/O controller does not properly
+ * handle the system transaction.  Another involves timing.  Ho hum.
+ */
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG_CFG(args)	printk args
+#else
+# define DBG_CFG(args)
+#endif
+
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address
+ * accordingly.  It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Note that all config space accesses use Type 1 address format.
+ *
+ * Note also that type 1 is determined by non-zero bus number.
+ *
+ * Type 1:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:24	reserved
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, unsigned char *type1)
+{
+	struct pci_controller *hose = pbus->sysdata;
+	unsigned long addr;
+	u8 bus = pbus->number;
+
+	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
+		 "pci_addr=0x%p, type1=0x%p)\n",
+		 bus, device_fn, where, pci_addr, type1));
+	
+	if (!pbus->parent) /* No parent means peer PCI bus. */
+		bus = 0;
+	*type1 = (bus != 0);
+
+	addr = (bus << 16) | (device_fn << 8) | where;
+	addr |= hose->config_space_base;
+		
+	*pci_addr = addr;
+	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return 0;
+}
+
+static int 
+tsunami_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 *value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		*value = __kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		*value = __kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*value = *(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int 
+tsunami_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		__kernel_stb(value, *(vucp)addr);
+		mb();
+		__kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		__kernel_stw(value, *(vusp)addr);
+		mb();
+		__kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*(vuip)addr = value;
+		mb();
+		*(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops tsunami_pci_ops = 
+{
+	.read =		tsunami_read_config,
+	.write = 	tsunami_write_config,
+};
+
+void
+tsunami_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	tsunami_pchip *pchip = hose->index ? TSUNAMI_pchip1 : TSUNAMI_pchip0;
+	volatile unsigned long *csr;
+	unsigned long value;
+
+	/* We can invalidate up to 8 tlb entries in a go.  The flush
+	   matches against <31:16> in the pci address.  */
+	csr = &pchip->tlbia.csr;
+	if (((start ^ end) & 0xffff0000) == 0)
+		csr = &pchip->tlbiv.csr;
+
+	/* For TBIA, it doesn't matter what value we write.  For TBI, 
+	   it's the shifted tag bits.  */
+	value = (start & 0xffff0000) >> 12;
+
+	*csr = value;
+	mb();
+	*csr;
+}
+
+#ifdef NXM_MACHINE_CHECKS_ON_TSUNAMI
+static long __init
+tsunami_probe_read(volatile unsigned long *vaddr)
+{
+	long dont_care, probe_result;
+	int cpu = smp_processor_id();
+	int s = swpipl(IPL_MCHECK - 1);
+
+	mcheck_taken(cpu) = 0;
+	mcheck_expected(cpu) = 1;
+	mb();
+	dont_care = *vaddr;
+	draina();
+	mcheck_expected(cpu) = 0;
+	probe_result = !mcheck_taken(cpu);
+	mcheck_taken(cpu) = 0;
+	setipl(s);
+
+	printk("dont_care == 0x%lx\n", dont_care);
+
+	return probe_result;
+}
+
+static long __init
+tsunami_probe_write(volatile unsigned long *vaddr)
+{
+	long true_contents, probe_result = 1;
+
+	TSUNAMI_cchip->misc.csr |= (1L << 28); /* clear NXM... */
+	true_contents = *vaddr;
+	*vaddr = 0;
+	draina();
+	if (TSUNAMI_cchip->misc.csr & (1L << 28)) {
+		int source = (TSUNAMI_cchip->misc.csr >> 29) & 7;
+		TSUNAMI_cchip->misc.csr |= (1L << 28); /* ...and unlock NXS. */
+		probe_result = 0;
+		printk("tsunami_probe_write: unit %d at 0x%016lx\n", source,
+		       (unsigned long)vaddr);
+	}
+	if (probe_result)
+		*vaddr = true_contents;
+	return probe_result;
+}
+#else
+#define tsunami_probe_read(ADDR) 1
+#endif /* NXM_MACHINE_CHECKS_ON_TSUNAMI */
+
+static void __init
+tsunami_init_one_pchip(tsunami_pchip *pchip, int index)
+{
+	struct pci_controller *hose;
+
+	if (tsunami_probe_read(&pchip->pctl.csr) == 0)
+		return;
+
+	hose = alloc_pci_controller();
+	if (index == 0)
+		pci_isa_hose = hose;
+	hose->io_space = alloc_resource();
+	hose->mem_space = alloc_resource();
+
+	/* This is for userland consumption.  For some reason, the 40-bit
+	   PIO bias that we use in the kernel through KSEG didn't work for
+	   the page table based user mappings.  So make sure we get the
+	   43-bit PIO bias.  */
+	hose->sparse_mem_base = 0;
+	hose->sparse_io_base = 0;
+	hose->dense_mem_base
+	  = (TSUNAMI_MEM(index) & 0xffffffffffL) | 0x80000000000L;
+	hose->dense_io_base
+	  = (TSUNAMI_IO(index) & 0xffffffffffL) | 0x80000000000L;
+
+	hose->config_space_base = TSUNAMI_CONF(index);
+	hose->index = index;
+
+	hose->io_space->start = TSUNAMI_IO(index) - TSUNAMI_IO_BIAS;
+	hose->io_space->end = hose->io_space->start + TSUNAMI_IO_SPACE - 1;
+	hose->io_space->name = pci_io_names[index];
+	hose->io_space->flags = IORESOURCE_IO;
+
+	hose->mem_space->start = TSUNAMI_MEM(index) - TSUNAMI_MEM_BIAS;
+	hose->mem_space->end = hose->mem_space->start + 0xffffffff;
+	hose->mem_space->name = pci_mem_names[index];
+	hose->mem_space->flags = IORESOURCE_MEM;
+
+	if (request_resource(&ioport_resource, hose->io_space) < 0)
+		printk(KERN_ERR "Failed to request IO on hose %d\n", index);
+	if (request_resource(&iomem_resource, hose->mem_space) < 0)
+		printk(KERN_ERR "Failed to request MEM on hose %d\n", index);
+
+	/*
+	 * Save the existing PCI window translations.  SRM will 
+	 * need them when we go to reboot.
+	 */
+
+	saved_config[index].wsba[0] = pchip->wsba[0].csr;
+	saved_config[index].wsm[0] = pchip->wsm[0].csr;
+	saved_config[index].tba[0] = pchip->tba[0].csr;
+
+	saved_config[index].wsba[1] = pchip->wsba[1].csr;
+	saved_config[index].wsm[1] = pchip->wsm[1].csr;
+	saved_config[index].tba[1] = pchip->tba[1].csr;
+
+	saved_config[index].wsba[2] = pchip->wsba[2].csr;
+	saved_config[index].wsm[2] = pchip->wsm[2].csr;
+	saved_config[index].tba[2] = pchip->tba[2].csr;
+
+	saved_config[index].wsba[3] = pchip->wsba[3].csr;
+	saved_config[index].wsm[3] = pchip->wsm[3].csr;
+	saved_config[index].tba[3] = pchip->tba[3].csr;
+
+	/*
+	 * Set up the PCI to main memory translation windows.
+	 *
+	 * Note: Window 3 is scatter-gather only
+	 * 
+	 * Window 0 is scatter-gather 8MB at 8MB (for isa)
+	 * Window 1 is scatter-gather (up to) 1GB at 1GB
+	 * Window 2 is direct access 2GB at 2GB
+	 *
+	 * NOTE: we need the align_entry settings for Acer devices on ES40,
+	 * specifically floppy and IDE when memory is larger than 2GB.
+	 */
+	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
+				       SMP_CACHE_BYTES);
+	/* Initially set for 4 PTEs, but will be overridden to 64K for ISA. */
+        hose->sg_isa->align_entry = 4;
+
+	hose->sg_pci = iommu_arena_new(hose, 0x40000000,
+				       size_for_memory(0x40000000),
+				       SMP_CACHE_BYTES);
+        hose->sg_pci->align_entry = 4; /* Tsunami caches 4 PTEs at a time */
+
+	__direct_map_base = 0x80000000;
+	__direct_map_size = 0x80000000;
+
+	pchip->wsba[0].csr = hose->sg_isa->dma_base | 3;
+	pchip->wsm[0].csr  = (hose->sg_isa->size - 1) & 0xfff00000;
+	pchip->tba[0].csr  = virt_to_phys(hose->sg_isa->ptes);
+
+	pchip->wsba[1].csr = hose->sg_pci->dma_base | 3;
+	pchip->wsm[1].csr  = (hose->sg_pci->size - 1) & 0xfff00000;
+	pchip->tba[1].csr  = virt_to_phys(hose->sg_pci->ptes);
+
+	pchip->wsba[2].csr = 0x80000000 | 1;
+	pchip->wsm[2].csr  = (0x80000000 - 1) & 0xfff00000;
+	pchip->tba[2].csr  = 0;
+
+	pchip->wsba[3].csr = 0;
+
+	/* Enable the Monster Window to make DAC pci64 possible. */
+	pchip->pctl.csr |= pctl_m_mwin;
+
+	tsunami_pci_tbi(hose, 0, -1);
+}
+
+
+void __iomem *
+tsunami_ioportmap(unsigned long addr)
+{
+	FIXUP_IOADDR_VGA(addr);
+	return (void __iomem *)(addr + TSUNAMI_IO_BIAS);
+}
+
+void __iomem *
+tsunami_ioremap(unsigned long addr, unsigned long size)
+{
+	FIXUP_MEMADDR_VGA(addr);
+	return (void __iomem *)(addr + TSUNAMI_MEM_BIAS);
+}
+
+#ifndef CONFIG_ALPHA_GENERIC
+EXPORT_SYMBOL(tsunami_ioportmap);
+EXPORT_SYMBOL(tsunami_ioremap);
+#endif
+
+void __init
+tsunami_init_arch(void)
+{
+#ifdef NXM_MACHINE_CHECKS_ON_TSUNAMI
+	unsigned long tmp;
+	
+	/* Ho hum.. init_arch is called before init_IRQ, but we need to be
+	   able to handle machine checks.  So install the handler now.  */
+	wrent(entInt, 0);
+
+	/* NXMs just don't matter to Tsunami--unless they make it
+	   choke completely. */
+	tmp = (unsigned long)(TSUNAMI_cchip - 1);
+	printk("%s: probing bogus address:  0x%016lx\n", __func__, bogus_addr);
+	printk("\tprobe %s\n",
+	       tsunami_probe_write((unsigned long *)bogus_addr)
+	       ? "succeeded" : "failed");
+#endif /* NXM_MACHINE_CHECKS_ON_TSUNAMI */
+
+#if 0
+	printk("%s: CChip registers:\n", __func__);
+	printk("%s: CSR_CSC 0x%lx\n", __func__, TSUNAMI_cchip->csc.csr);
+	printk("%s: CSR_MTR 0x%lx\n", __func__, TSUNAMI_cchip.mtr.csr);
+	printk("%s: CSR_MISC 0x%lx\n", __func__, TSUNAMI_cchip->misc.csr);
+	printk("%s: CSR_DIM0 0x%lx\n", __func__, TSUNAMI_cchip->dim0.csr);
+	printk("%s: CSR_DIM1 0x%lx\n", __func__, TSUNAMI_cchip->dim1.csr);
+	printk("%s: CSR_DIR0 0x%lx\n", __func__, TSUNAMI_cchip->dir0.csr);
+	printk("%s: CSR_DIR1 0x%lx\n", __func__, TSUNAMI_cchip->dir1.csr);
+	printk("%s: CSR_DRIR 0x%lx\n", __func__, TSUNAMI_cchip->drir.csr);
+
+	printk("%s: DChip registers:\n");
+	printk("%s: CSR_DSC 0x%lx\n", __func__, TSUNAMI_dchip->dsc.csr);
+	printk("%s: CSR_STR 0x%lx\n", __func__, TSUNAMI_dchip->str.csr);
+	printk("%s: CSR_DREV 0x%lx\n", __func__, TSUNAMI_dchip->drev.csr);
+#endif
+	/* With multiple PCI busses, we play with I/O as physical addrs.  */
+	ioport_resource.end = ~0UL;
+
+	/* Find how many hoses we have, and initialize them.  TSUNAMI
+	   and TYPHOON can have 2, but might only have 1 (DS10).  */
+
+	tsunami_init_one_pchip(TSUNAMI_pchip0, 0);
+	if (TSUNAMI_cchip->csc.csr & 1L<<14)
+		tsunami_init_one_pchip(TSUNAMI_pchip1, 1);
+
+	/* Check for graphic console location (if any).  */
+	find_console_vga_hose();
+}
+
+static void
+tsunami_kill_one_pchip(tsunami_pchip *pchip, int index)
+{
+	pchip->wsba[0].csr = saved_config[index].wsba[0];
+	pchip->wsm[0].csr = saved_config[index].wsm[0];
+	pchip->tba[0].csr = saved_config[index].tba[0];
+
+	pchip->wsba[1].csr = saved_config[index].wsba[1];
+	pchip->wsm[1].csr = saved_config[index].wsm[1];
+	pchip->tba[1].csr = saved_config[index].tba[1];
+
+	pchip->wsba[2].csr = saved_config[index].wsba[2];
+	pchip->wsm[2].csr = saved_config[index].wsm[2];
+	pchip->tba[2].csr = saved_config[index].tba[2];
+
+	pchip->wsba[3].csr = saved_config[index].wsba[3];
+	pchip->wsm[3].csr = saved_config[index].wsm[3];
+	pchip->tba[3].csr = saved_config[index].tba[3];
+}
+
+void
+tsunami_kill_arch(int mode)
+{
+	tsunami_kill_one_pchip(TSUNAMI_pchip0, 0);
+	if (TSUNAMI_cchip->csc.csr & 1L<<14)
+		tsunami_kill_one_pchip(TSUNAMI_pchip1, 1);
+}
+
+static inline void
+tsunami_pci_clr_err_1(tsunami_pchip *pchip)
+{
+	pchip->perror.csr;
+	pchip->perror.csr = 0x040;
+	mb();
+	pchip->perror.csr;
+}
+
+static inline void
+tsunami_pci_clr_err(void)
+{
+	tsunami_pci_clr_err_1(TSUNAMI_pchip0);
+
+	/* TSUNAMI and TYPHOON can have 2, but might only have 1 (DS10) */
+	if (TSUNAMI_cchip->csc.csr & 1L<<14)
+		tsunami_pci_clr_err_1(TSUNAMI_pchip1);
+}
+
+void
+tsunami_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	/* Clear error before any reporting.  */
+	mb();
+	mb();  /* magic */
+	draina();
+	tsunami_pci_clr_err();
+	wrmces(0x7);
+	mb();
+
+	process_mcheck_info(vector, la_ptr, "TSUNAMI",
+			    mcheck_expected(smp_processor_id()));
+}
diff --git a/arch/alpha/kernel/core_wildfire.c b/arch/alpha/kernel/core_wildfire.c
new file mode 100644
index 0000000000..3a804b67f9
--- /dev/null
+++ b/arch/alpha/kernel/core_wildfire.c
@@ -0,0 +1,633 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/core_wildfire.c
+ *
+ *  Wildfire support.
+ *
+ *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
+ */
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/core_wildfire.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+#define DEBUG_CONFIG 0
+#define DEBUG_DUMP_REGS 0
+#define DEBUG_DUMP_CONFIG 1
+
+#if DEBUG_CONFIG
+# define DBG_CFG(args)	printk args
+#else
+# define DBG_CFG(args)
+#endif
+
+#if DEBUG_DUMP_REGS
+static void wildfire_dump_pci_regs(int qbbno, int hoseno);
+static void wildfire_dump_pca_regs(int qbbno, int pcano);
+static void wildfire_dump_qsa_regs(int qbbno);
+static void wildfire_dump_qsd_regs(int qbbno);
+static void wildfire_dump_iop_regs(int qbbno);
+static void wildfire_dump_gp_regs(int qbbno);
+#endif
+#if DEBUG_DUMP_CONFIG
+static void wildfire_dump_hardware_config(void);
+#endif
+
+unsigned char wildfire_hard_qbb_map[WILDFIRE_MAX_QBB];
+unsigned char wildfire_soft_qbb_map[WILDFIRE_MAX_QBB];
+#define QBB_MAP_EMPTY	0xff
+
+unsigned long wildfire_hard_qbb_mask;
+unsigned long wildfire_soft_qbb_mask;
+unsigned long wildfire_gp_mask;
+unsigned long wildfire_hs_mask;
+unsigned long wildfire_iop_mask;
+unsigned long wildfire_ior_mask;
+unsigned long wildfire_pca_mask;
+unsigned long wildfire_cpu_mask;
+unsigned long wildfire_mem_mask;
+
+void __init
+wildfire_init_hose(int qbbno, int hoseno)
+{
+	struct pci_controller *hose;
+	wildfire_pci *pci;
+
+	hose = alloc_pci_controller();
+	hose->io_space = alloc_resource();
+	hose->mem_space = alloc_resource();
+
+        /* This is for userland consumption. */
+        hose->sparse_mem_base = 0;
+        hose->sparse_io_base  = 0;
+        hose->dense_mem_base  = WILDFIRE_MEM(qbbno, hoseno);
+        hose->dense_io_base   = WILDFIRE_IO(qbbno, hoseno);
+
+	hose->config_space_base = WILDFIRE_CONF(qbbno, hoseno);
+	hose->index = (qbbno << 3) + hoseno;
+
+	hose->io_space->start = WILDFIRE_IO(qbbno, hoseno) - WILDFIRE_IO_BIAS;
+	hose->io_space->end = hose->io_space->start + WILDFIRE_IO_SPACE - 1;
+	hose->io_space->name = pci_io_names[hoseno];
+	hose->io_space->flags = IORESOURCE_IO;
+
+	hose->mem_space->start = WILDFIRE_MEM(qbbno, hoseno)-WILDFIRE_MEM_BIAS;
+	hose->mem_space->end = hose->mem_space->start + 0xffffffff;
+	hose->mem_space->name = pci_mem_names[hoseno];
+	hose->mem_space->flags = IORESOURCE_MEM;
+
+	if (request_resource(&ioport_resource, hose->io_space) < 0)
+		printk(KERN_ERR "Failed to request IO on qbb %d hose %d\n",
+		       qbbno, hoseno);
+	if (request_resource(&iomem_resource, hose->mem_space) < 0)
+		printk(KERN_ERR "Failed to request MEM on qbb %d hose %d\n",
+		       qbbno, hoseno);
+
+#if DEBUG_DUMP_REGS
+	wildfire_dump_pci_regs(qbbno, hoseno);
+#endif
+
+        /*
+         * Set up the PCI to main memory translation windows.
+         *
+         * Note: Window 3 is scatter-gather only
+         * 
+         * Window 0 is scatter-gather 8MB at 8MB (for isa)
+	 * Window 1 is direct access 1GB at 1GB
+	 * Window 2 is direct access 1GB at 2GB
+         * Window 3 is scatter-gather 128MB at 3GB
+         * ??? We ought to scale window 3 memory.
+         *
+         */
+	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
+				       SMP_CACHE_BYTES);
+	hose->sg_pci = iommu_arena_new(hose, 0xc0000000, 0x08000000,
+				       SMP_CACHE_BYTES);
+
+	pci = WILDFIRE_pci(qbbno, hoseno);
+
+	pci->pci_window[0].wbase.csr = hose->sg_isa->dma_base | 3;
+	pci->pci_window[0].wmask.csr = (hose->sg_isa->size - 1) & 0xfff00000;
+	pci->pci_window[0].tbase.csr = virt_to_phys(hose->sg_isa->ptes);
+
+	pci->pci_window[1].wbase.csr = 0x40000000 | 1;
+	pci->pci_window[1].wmask.csr = (0x40000000 -1) & 0xfff00000;
+	pci->pci_window[1].tbase.csr = 0;
+
+	pci->pci_window[2].wbase.csr = 0x80000000 | 1;
+	pci->pci_window[2].wmask.csr = (0x40000000 -1) & 0xfff00000;
+	pci->pci_window[2].tbase.csr = 0x40000000;
+
+	pci->pci_window[3].wbase.csr = hose->sg_pci->dma_base | 3;
+	pci->pci_window[3].wmask.csr = (hose->sg_pci->size - 1) & 0xfff00000;
+	pci->pci_window[3].tbase.csr = virt_to_phys(hose->sg_pci->ptes);
+
+	wildfire_pci_tbi(hose, 0, 0); /* Flush TLB at the end. */
+}
+
+void __init
+wildfire_init_pca(int qbbno, int pcano)
+{
+
+	/* Test for PCA existence first. */
+	if (!WILDFIRE_PCA_EXISTS(qbbno, pcano))
+	    return;
+
+#if DEBUG_DUMP_REGS
+	wildfire_dump_pca_regs(qbbno, pcano);
+#endif
+
+	/* Do both hoses of the PCA. */
+	wildfire_init_hose(qbbno, (pcano << 1) + 0);
+	wildfire_init_hose(qbbno, (pcano << 1) + 1);
+}
+
+void __init
+wildfire_init_qbb(int qbbno)
+{
+	int pcano;
+
+	/* Test for QBB existence first. */
+	if (!WILDFIRE_QBB_EXISTS(qbbno))
+		return;
+
+#if DEBUG_DUMP_REGS
+	wildfire_dump_qsa_regs(qbbno);
+	wildfire_dump_qsd_regs(qbbno);
+	wildfire_dump_iop_regs(qbbno);
+	wildfire_dump_gp_regs(qbbno);
+#endif
+
+	/* Init all PCAs here. */
+	for (pcano = 0; pcano < WILDFIRE_PCA_PER_QBB; pcano++) {
+		wildfire_init_pca(qbbno, pcano);
+	}
+}
+
+void __init
+wildfire_hardware_probe(void)
+{
+	unsigned long temp;
+	unsigned int hard_qbb, soft_qbb;
+	wildfire_fast_qsd *fast = WILDFIRE_fast_qsd();
+	wildfire_qsd *qsd;
+	wildfire_qsa *qsa;
+	wildfire_iop *iop;
+	wildfire_gp *gp;
+	wildfire_ne *ne;
+	wildfire_fe *fe;
+	int i;
+
+	temp = fast->qsd_whami.csr;
+#if 0
+	printk(KERN_ERR "fast QSD_WHAMI at base %p is 0x%lx\n", fast, temp);
+#endif
+
+	hard_qbb = (temp >> 8) & 7;
+	soft_qbb = (temp >> 4) & 7;
+
+	/* Init the HW configuration variables. */
+	wildfire_hard_qbb_mask = (1 << hard_qbb);
+	wildfire_soft_qbb_mask = (1 << soft_qbb);
+
+	wildfire_gp_mask = 0;
+	wildfire_hs_mask = 0;
+	wildfire_iop_mask = 0;
+	wildfire_ior_mask = 0;
+	wildfire_pca_mask = 0;
+
+	wildfire_cpu_mask = 0;
+	wildfire_mem_mask = 0;
+
+	memset(wildfire_hard_qbb_map, QBB_MAP_EMPTY, WILDFIRE_MAX_QBB);
+	memset(wildfire_soft_qbb_map, QBB_MAP_EMPTY, WILDFIRE_MAX_QBB);
+
+	/* First, determine which QBBs are present. */
+	qsa = WILDFIRE_qsa(soft_qbb);
+
+	temp = qsa->qsa_qbb_id.csr;
+#if 0
+	printk(KERN_ERR "QSA_QBB_ID at base %p is 0x%lx\n", qsa, temp);
+#endif
+
+	if (temp & 0x40) /* Is there an HS? */
+		wildfire_hs_mask = 1;
+
+	if (temp & 0x20) { /* Is there a GP? */
+		gp = WILDFIRE_gp(soft_qbb);
+		temp = 0;
+		for (i = 0; i < 4; i++) {
+			temp |= gp->gpa_qbb_map[i].csr << (i * 8);
+#if 0
+			printk(KERN_ERR "GPA_QBB_MAP[%d] at base %p is 0x%lx\n",
+			       i, gp, temp);
+#endif
+		}
+
+		for (hard_qbb = 0; hard_qbb < WILDFIRE_MAX_QBB; hard_qbb++) {
+			if (temp & 8) { /* Is there a QBB? */
+				soft_qbb = temp & 7;
+				wildfire_hard_qbb_mask |= (1 << hard_qbb);
+				wildfire_soft_qbb_mask |= (1 << soft_qbb);
+			}
+			temp >>= 4;
+		}
+		wildfire_gp_mask = wildfire_soft_qbb_mask;
+        }
+
+	/* Next determine each QBBs resources. */
+	for (soft_qbb = 0; soft_qbb < WILDFIRE_MAX_QBB; soft_qbb++) {
+	    if (WILDFIRE_QBB_EXISTS(soft_qbb)) {
+	        qsd = WILDFIRE_qsd(soft_qbb);
+		temp = qsd->qsd_whami.csr;
+#if 0
+	printk(KERN_ERR "QSD_WHAMI at base %p is 0x%lx\n", qsd, temp);
+#endif
+		hard_qbb = (temp >> 8) & 7;
+		wildfire_hard_qbb_map[hard_qbb] = soft_qbb;
+		wildfire_soft_qbb_map[soft_qbb] = hard_qbb;
+
+		qsa = WILDFIRE_qsa(soft_qbb);
+		temp = qsa->qsa_qbb_pop[0].csr;
+#if 0
+	printk(KERN_ERR "QSA_QBB_POP_0 at base %p is 0x%lx\n", qsa, temp);
+#endif
+		wildfire_cpu_mask |= ((temp >> 0) & 0xf) << (soft_qbb << 2);
+		wildfire_mem_mask |= ((temp >> 4) & 0xf) << (soft_qbb << 2);
+
+		temp = qsa->qsa_qbb_pop[1].csr;
+#if 0
+	printk(KERN_ERR "QSA_QBB_POP_1 at base %p is 0x%lx\n", qsa, temp);
+#endif
+		wildfire_iop_mask |= (1 << soft_qbb);
+		wildfire_ior_mask |= ((temp >> 4) & 0xf) << (soft_qbb << 2);
+
+		temp = qsa->qsa_qbb_id.csr;
+#if 0
+	printk(KERN_ERR "QSA_QBB_ID at %p is 0x%lx\n", qsa, temp);
+#endif
+		if (temp & 0x20)
+		    wildfire_gp_mask |= (1 << soft_qbb);
+
+		/* Probe for PCA existence here. */
+		for (i = 0; i < WILDFIRE_PCA_PER_QBB; i++) {
+		    iop = WILDFIRE_iop(soft_qbb);
+		    ne = WILDFIRE_ne(soft_qbb, i);
+		    fe = WILDFIRE_fe(soft_qbb, i);
+
+		    if ((iop->iop_hose[i].init.csr & 1) == 1 &&
+			((ne->ne_what_am_i.csr & 0xf00000300UL) == 0x100000300UL) &&
+			((fe->fe_what_am_i.csr & 0xf00000300UL) == 0x100000200UL))
+		    {
+		        wildfire_pca_mask |= 1 << ((soft_qbb << 2) + i);
+		    }
+		}
+
+	    }
+	}
+#if DEBUG_DUMP_CONFIG
+	wildfire_dump_hardware_config();
+#endif
+}
+
+void __init
+wildfire_init_arch(void)
+{
+	int qbbno;
+
+	/* With multiple PCI buses, we play with I/O as physical addrs.  */
+	ioport_resource.end = ~0UL;
+
+
+	/* Probe the hardware for info about configuration. */
+	wildfire_hardware_probe();
+
+	/* Now init all the found QBBs. */
+	for (qbbno = 0; qbbno < WILDFIRE_MAX_QBB; qbbno++) {
+		wildfire_init_qbb(qbbno);
+	}
+
+	/* Normal direct PCI DMA mapping. */ 
+	__direct_map_base = 0x40000000UL;
+	__direct_map_size = 0x80000000UL;
+}
+
+void
+wildfire_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	mb();
+	mb();  /* magic */
+	draina();
+	/* FIXME: clear pci errors */
+	wrmces(0x7);
+	mb();
+
+	process_mcheck_info(vector, la_ptr, "WILDFIRE",
+			    mcheck_expected(smp_processor_id()));
+}
+
+void
+wildfire_kill_arch(int mode)
+{
+}
+
+void
+wildfire_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	int qbbno = hose->index >> 3;
+	int hoseno = hose->index & 7;
+	wildfire_pci *pci = WILDFIRE_pci(qbbno, hoseno);
+
+	mb();
+	pci->pci_flush_tlb.csr; /* reading does the trick */
+}
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, unsigned char *type1)
+{
+	struct pci_controller *hose = pbus->sysdata;
+	unsigned long addr;
+	u8 bus = pbus->number;
+
+	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
+		 "pci_addr=0x%p, type1=0x%p)\n",
+		 bus, device_fn, where, pci_addr, type1));
+
+	if (!pbus->parent) /* No parent means peer PCI bus. */
+		bus = 0;
+	*type1 = (bus != 0);
+
+	addr = (bus << 16) | (device_fn << 8) | where;
+	addr |= hose->config_space_base;
+		
+	*pci_addr = addr;
+	DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return 0;
+}
+
+static int 
+wildfire_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 *value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		*value = __kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		*value = __kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*value = *(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int 
+wildfire_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		      int size, u32 value)
+{
+	unsigned long addr;
+	unsigned char type1;
+
+	if (mk_conf_addr(bus, devfn, where, &addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1:
+		__kernel_stb(value, *(vucp)addr);
+		mb();
+		__kernel_ldbu(*(vucp)addr);
+		break;
+	case 2:
+		__kernel_stw(value, *(vusp)addr);
+		mb();
+		__kernel_ldwu(*(vusp)addr);
+		break;
+	case 4:
+		*(vuip)addr = value;
+		mb();
+		*(vuip)addr;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops wildfire_pci_ops =
+{
+	.read =		wildfire_read_config,
+	.write =	wildfire_write_config,
+};
+
+#if DEBUG_DUMP_REGS
+
+static void __init
+wildfire_dump_pci_regs(int qbbno, int hoseno)
+{
+	wildfire_pci *pci = WILDFIRE_pci(qbbno, hoseno);
+	int i;
+
+	printk(KERN_ERR "PCI registers for QBB %d hose %d (%p)\n",
+	       qbbno, hoseno, pci);
+
+	printk(KERN_ERR " PCI_IO_ADDR_EXT: 0x%16lx\n",
+	       pci->pci_io_addr_ext.csr);
+	printk(KERN_ERR " PCI_CTRL:        0x%16lx\n", pci->pci_ctrl.csr);
+	printk(KERN_ERR " PCI_ERR_SUM:     0x%16lx\n", pci->pci_err_sum.csr);
+	printk(KERN_ERR " PCI_ERR_ADDR:    0x%16lx\n", pci->pci_err_addr.csr);
+	printk(KERN_ERR " PCI_STALL_CNT:   0x%16lx\n", pci->pci_stall_cnt.csr);
+	printk(KERN_ERR " PCI_PEND_INT:    0x%16lx\n", pci->pci_pend_int.csr);
+	printk(KERN_ERR " PCI_SENT_INT:    0x%16lx\n", pci->pci_sent_int.csr);
+
+	printk(KERN_ERR " DMA window registers for QBB %d hose %d (%p)\n",
+	       qbbno, hoseno, pci);
+	for (i = 0; i < 4; i++) {
+		printk(KERN_ERR "  window %d: 0x%16lx 0x%16lx 0x%16lx\n", i,
+		       pci->pci_window[i].wbase.csr,
+		       pci->pci_window[i].wmask.csr,
+		       pci->pci_window[i].tbase.csr);
+	}
+	printk(KERN_ERR "\n");
+}
+
+static void __init
+wildfire_dump_pca_regs(int qbbno, int pcano)
+{
+	wildfire_pca *pca = WILDFIRE_pca(qbbno, pcano);
+	int i;
+
+	printk(KERN_ERR "PCA registers for QBB %d PCA %d (%p)\n",
+	       qbbno, pcano, pca);
+
+	printk(KERN_ERR " PCA_WHAT_AM_I: 0x%16lx\n", pca->pca_what_am_i.csr);
+	printk(KERN_ERR " PCA_ERR_SUM:   0x%16lx\n", pca->pca_err_sum.csr);
+	printk(KERN_ERR " PCA_PEND_INT:  0x%16lx\n", pca->pca_pend_int.csr);
+	printk(KERN_ERR " PCA_SENT_INT:  0x%16lx\n", pca->pca_sent_int.csr);
+	printk(KERN_ERR " PCA_STDIO_EL:  0x%16lx\n",
+	       pca->pca_stdio_edge_level.csr);
+
+	printk(KERN_ERR " PCA target registers for QBB %d PCA %d (%p)\n",
+	       qbbno, pcano, pca);
+	for (i = 0; i < 4; i++) {
+	  printk(KERN_ERR "  target %d: 0x%16lx 0x%16lx\n", i,
+		       pca->pca_int[i].target.csr,
+		       pca->pca_int[i].enable.csr);
+	}
+
+	printk(KERN_ERR "\n");
+}
+
+static void __init
+wildfire_dump_qsa_regs(int qbbno)
+{
+	wildfire_qsa *qsa = WILDFIRE_qsa(qbbno);
+	int i;
+
+	printk(KERN_ERR "QSA registers for QBB %d (%p)\n", qbbno, qsa);
+
+	printk(KERN_ERR " QSA_QBB_ID:      0x%16lx\n", qsa->qsa_qbb_id.csr);
+	printk(KERN_ERR " QSA_PORT_ENA:    0x%16lx\n", qsa->qsa_port_ena.csr);
+	printk(KERN_ERR " QSA_REF_INT:     0x%16lx\n", qsa->qsa_ref_int.csr);
+
+	for (i = 0; i < 5; i++)
+		printk(KERN_ERR " QSA_CONFIG_%d:    0x%16lx\n",
+		       i, qsa->qsa_config[i].csr);
+
+	for (i = 0; i < 2; i++)
+		printk(KERN_ERR " QSA_QBB_POP_%d:   0x%16lx\n",
+		       i, qsa->qsa_qbb_pop[0].csr);
+
+	printk(KERN_ERR "\n");
+}
+
+static void __init
+wildfire_dump_qsd_regs(int qbbno)
+{
+	wildfire_qsd *qsd = WILDFIRE_qsd(qbbno);
+
+	printk(KERN_ERR "QSD registers for QBB %d (%p)\n", qbbno, qsd);
+
+	printk(KERN_ERR " QSD_WHAMI:         0x%16lx\n", qsd->qsd_whami.csr);
+	printk(KERN_ERR " QSD_REV:           0x%16lx\n", qsd->qsd_rev.csr);
+	printk(KERN_ERR " QSD_PORT_PRESENT:  0x%16lx\n",
+	       qsd->qsd_port_present.csr);
+	printk(KERN_ERR " QSD_PORT_ACTIVE:   0x%16lx\n",
+	       qsd->qsd_port_active.csr);
+	printk(KERN_ERR " QSD_FAULT_ENA:     0x%16lx\n",
+	       qsd->qsd_fault_ena.csr);
+	printk(KERN_ERR " QSD_CPU_INT_ENA:   0x%16lx\n",
+	       qsd->qsd_cpu_int_ena.csr);
+	printk(KERN_ERR " QSD_MEM_CONFIG:    0x%16lx\n",
+	       qsd->qsd_mem_config.csr);
+	printk(KERN_ERR " QSD_ERR_SUM:       0x%16lx\n",
+	       qsd->qsd_err_sum.csr);
+
+	printk(KERN_ERR "\n");
+}
+
+static void __init
+wildfire_dump_iop_regs(int qbbno)
+{
+	wildfire_iop *iop = WILDFIRE_iop(qbbno);
+	int i;
+
+	printk(KERN_ERR "IOP registers for QBB %d (%p)\n", qbbno, iop);
+
+	printk(KERN_ERR " IOA_CONFIG:          0x%16lx\n", iop->ioa_config.csr);
+	printk(KERN_ERR " IOD_CONFIG:          0x%16lx\n", iop->iod_config.csr);
+	printk(KERN_ERR " IOP_SWITCH_CREDITS:  0x%16lx\n",
+	       iop->iop_switch_credits.csr);
+	printk(KERN_ERR " IOP_HOSE_CREDITS:    0x%16lx\n",
+	       iop->iop_hose_credits.csr);
+
+	for (i = 0; i < 4; i++) 
+		printk(KERN_ERR " IOP_HOSE_%d_INIT:     0x%16lx\n",
+		       i, iop->iop_hose[i].init.csr);
+	for (i = 0; i < 4; i++) 
+		printk(KERN_ERR " IOP_DEV_INT_TARGET_%d: 0x%16lx\n",
+		       i, iop->iop_dev_int[i].target.csr);
+
+	printk(KERN_ERR "\n");
+}
+
+static void __init
+wildfire_dump_gp_regs(int qbbno)
+{
+	wildfire_gp *gp = WILDFIRE_gp(qbbno);
+	int i;
+
+	printk(KERN_ERR "GP registers for QBB %d (%p)\n", qbbno, gp);
+	for (i = 0; i < 4; i++) 
+		printk(KERN_ERR " GPA_QBB_MAP_%d:     0x%16lx\n",
+		       i, gp->gpa_qbb_map[i].csr);
+
+	printk(KERN_ERR " GPA_MEM_POP_MAP:   0x%16lx\n",
+	       gp->gpa_mem_pop_map.csr);
+	printk(KERN_ERR " GPA_SCRATCH:       0x%16lx\n", gp->gpa_scratch.csr);
+	printk(KERN_ERR " GPA_DIAG:          0x%16lx\n", gp->gpa_diag.csr);
+	printk(KERN_ERR " GPA_CONFIG_0:      0x%16lx\n", gp->gpa_config_0.csr);
+	printk(KERN_ERR " GPA_INIT_ID:       0x%16lx\n", gp->gpa_init_id.csr);
+	printk(KERN_ERR " GPA_CONFIG_2:      0x%16lx\n", gp->gpa_config_2.csr);
+
+	printk(KERN_ERR "\n");
+}
+#endif /* DUMP_REGS */
+
+#if DEBUG_DUMP_CONFIG
+static void __init
+wildfire_dump_hardware_config(void)
+{
+	int i;
+
+	printk(KERN_ERR "Probed Hardware Configuration\n");
+
+	printk(KERN_ERR " hard_qbb_mask:  0x%16lx\n", wildfire_hard_qbb_mask);
+	printk(KERN_ERR " soft_qbb_mask:  0x%16lx\n", wildfire_soft_qbb_mask);
+
+	printk(KERN_ERR " gp_mask:        0x%16lx\n", wildfire_gp_mask);
+	printk(KERN_ERR " hs_mask:        0x%16lx\n", wildfire_hs_mask);
+	printk(KERN_ERR " iop_mask:       0x%16lx\n", wildfire_iop_mask);
+	printk(KERN_ERR " ior_mask:       0x%16lx\n", wildfire_ior_mask);
+	printk(KERN_ERR " pca_mask:       0x%16lx\n", wildfire_pca_mask);
+
+	printk(KERN_ERR " cpu_mask:       0x%16lx\n", wildfire_cpu_mask);
+	printk(KERN_ERR " mem_mask:       0x%16lx\n", wildfire_mem_mask);
+
+	printk(" hard_qbb_map: ");
+	for (i = 0; i < WILDFIRE_MAX_QBB; i++)
+	    if (wildfire_hard_qbb_map[i] == QBB_MAP_EMPTY)
+		printk("--- ");
+	    else
+		printk("%3d ", wildfire_hard_qbb_map[i]);
+	printk("\n");
+
+	printk(" soft_qbb_map: ");
+	for (i = 0; i < WILDFIRE_MAX_QBB; i++)
+	    if (wildfire_soft_qbb_map[i] == QBB_MAP_EMPTY)
+		printk("--- ");
+	    else
+		printk("%3d ", wildfire_soft_qbb_map[i]);
+	printk("\n");
+}
+#endif /* DUMP_CONFIG */
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
new file mode 100644
index 0000000000..eb51f93a70
--- /dev/null
+++ b/arch/alpha/kernel/entry.S
@@ -0,0 +1,852 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/alpha/kernel/entry.S
+ *
+ * Kernel entry-points.
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/pal.h>
+#include <asm/errno.h>
+#include <asm/unistd.h>
+
+	.text
+	.set noat
+	.cfi_sections	.debug_frame
+
+/* Stack offsets.  */
+#define SP_OFF			184
+#define SWITCH_STACK_SIZE	64
+
+.macro	CFI_START_OSF_FRAME	func
+	.align	4
+	.globl	\func
+	.type	\func,@function
+\func:
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa	$sp, 48
+	.cfi_rel_offset	64, 8
+	.cfi_rel_offset	$gp, 16
+	.cfi_rel_offset	$16, 24
+	.cfi_rel_offset	$17, 32
+	.cfi_rel_offset	$18, 40
+.endm
+
+.macro	CFI_END_OSF_FRAME	func
+	.cfi_endproc
+	.size	\func, . - \func
+.endm
+
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs 9-15 preserved by C code
+ * regs 16-18 saved by PAL-code
+ * regs 29-30 saved and set up by PAL-code
+ * JRP - Save regs 16-18 in a special area of the stack, so that
+ * the palcode-provided values are available to the signal handler.
+ */
+
+.macro	SAVE_ALL
+	subq	$sp, SP_OFF, $sp
+	.cfi_adjust_cfa_offset	SP_OFF
+	stq	$0, 0($sp)
+	stq	$1, 8($sp)
+	stq	$2, 16($sp)
+	stq	$3, 24($sp)
+	stq	$4, 32($sp)
+	stq	$28, 144($sp)
+	.cfi_rel_offset	$0, 0
+	.cfi_rel_offset $1, 8
+	.cfi_rel_offset	$2, 16
+	.cfi_rel_offset	$3, 24
+	.cfi_rel_offset	$4, 32
+	.cfi_rel_offset	$28, 144
+	lda	$2, alpha_mv
+	stq	$5, 40($sp)
+	stq	$6, 48($sp)
+	stq	$7, 56($sp)
+	stq	$8, 64($sp)
+	stq	$19, 72($sp)
+	stq	$20, 80($sp)
+	stq	$21, 88($sp)
+	ldq	$2, HAE_CACHE($2)
+	stq	$22, 96($sp)
+	stq	$23, 104($sp)
+	stq	$24, 112($sp)
+	stq	$25, 120($sp)
+	stq	$26, 128($sp)
+	stq	$27, 136($sp)
+	stq	$2, 152($sp)
+	stq	$16, 160($sp)
+	stq	$17, 168($sp)
+	stq	$18, 176($sp)
+	.cfi_rel_offset	$5, 40
+	.cfi_rel_offset	$6, 48
+	.cfi_rel_offset	$7, 56
+	.cfi_rel_offset	$8, 64
+	.cfi_rel_offset $19, 72
+	.cfi_rel_offset	$20, 80
+	.cfi_rel_offset	$21, 88
+	.cfi_rel_offset $22, 96
+	.cfi_rel_offset	$23, 104
+	.cfi_rel_offset	$24, 112
+	.cfi_rel_offset	$25, 120
+	.cfi_rel_offset	$26, 128
+	.cfi_rel_offset	$27, 136
+.endm
+
+.macro	RESTORE_ALL
+	lda	$19, alpha_mv
+	ldq	$0, 0($sp)
+	ldq	$1, 8($sp)
+	ldq	$2, 16($sp)
+	ldq	$3, 24($sp)
+	ldq	$21, 152($sp)
+	ldq	$20, HAE_CACHE($19)
+	ldq	$4, 32($sp)
+	ldq	$5, 40($sp)
+	ldq	$6, 48($sp)
+	ldq	$7, 56($sp)
+	subq	$20, $21, $20
+	ldq	$8, 64($sp)
+	beq	$20, 99f
+	ldq	$20, HAE_REG($19)
+	stq	$21, HAE_CACHE($19)
+	stq	$21, 0($20)
+99:	ldq	$19, 72($sp)
+	ldq	$20, 80($sp)
+	ldq	$21, 88($sp)
+	ldq	$22, 96($sp)
+	ldq	$23, 104($sp)
+	ldq	$24, 112($sp)
+	ldq	$25, 120($sp)
+	ldq	$26, 128($sp)
+	ldq	$27, 136($sp)
+	ldq	$28, 144($sp)
+	addq	$sp, SP_OFF, $sp
+	.cfi_restore	$0
+	.cfi_restore	$1
+	.cfi_restore	$2
+	.cfi_restore	$3
+	.cfi_restore	$4
+	.cfi_restore	$5
+	.cfi_restore	$6
+	.cfi_restore	$7
+	.cfi_restore	$8
+	.cfi_restore	$19
+	.cfi_restore	$20
+	.cfi_restore	$21
+	.cfi_restore	$22
+	.cfi_restore	$23
+	.cfi_restore	$24
+	.cfi_restore	$25
+	.cfi_restore	$26
+	.cfi_restore	$27
+	.cfi_restore	$28
+	.cfi_adjust_cfa_offset	-SP_OFF
+.endm
+
+.macro	DO_SWITCH_STACK
+	bsr	$1, do_switch_stack
+	.cfi_adjust_cfa_offset	SWITCH_STACK_SIZE
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
+.endm
+
+.macro	UNDO_SWITCH_STACK
+	bsr	$1, undo_switch_stack
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-SWITCH_STACK_SIZE
+.endm
+
+/*
+ * Non-syscall kernel entry points.
+ */
+
+CFI_START_OSF_FRAME entInt
+	SAVE_ALL
+	lda	$8, 0x3fff
+	lda	$26, ret_from_sys_call
+	bic	$sp, $8, $8
+	mov	$sp, $19
+	jsr	$31, do_entInt
+CFI_END_OSF_FRAME entInt
+
+CFI_START_OSF_FRAME entArith
+	SAVE_ALL
+	lda	$8, 0x3fff
+	lda	$26, ret_from_sys_call
+	bic	$sp, $8, $8
+	mov	$sp, $18
+	jsr	$31, do_entArith
+CFI_END_OSF_FRAME entArith
+
+CFI_START_OSF_FRAME entMM
+	SAVE_ALL
+/* save $9 - $15 so the inline exception code can manipulate them.  */
+	subq	$sp, 56, $sp
+	.cfi_adjust_cfa_offset	56
+	stq	$9, 0($sp)
+	stq	$10, 8($sp)
+	stq	$11, 16($sp)
+	stq	$12, 24($sp)
+	stq	$13, 32($sp)
+	stq	$14, 40($sp)
+	stq	$15, 48($sp)
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
+	addq	$sp, 56, $19
+/* handle the fault */
+	lda	$8, 0x3fff
+	bic	$sp, $8, $8
+	jsr	$26, do_page_fault
+/* reload the registers after the exception code played.  */
+	ldq	$9, 0($sp)
+	ldq	$10, 8($sp)
+	ldq	$11, 16($sp)
+	ldq	$12, 24($sp)
+	ldq	$13, 32($sp)
+	ldq	$14, 40($sp)
+	ldq	$15, 48($sp)
+	addq	$sp, 56, $sp
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-56
+/* finish up the syscall as normal.  */
+	br	ret_from_sys_call
+CFI_END_OSF_FRAME entMM
+
+CFI_START_OSF_FRAME entIF
+	SAVE_ALL
+	lda	$8, 0x3fff
+	lda	$26, ret_from_sys_call
+	bic	$sp, $8, $8
+	mov	$sp, $17
+	jsr	$31, do_entIF
+CFI_END_OSF_FRAME entIF
+
+CFI_START_OSF_FRAME entUna
+	lda	$sp, -256($sp)
+	.cfi_adjust_cfa_offset	256
+	stq	$0, 0($sp)
+	.cfi_rel_offset	$0, 0
+	.cfi_remember_state
+	ldq	$0, 256($sp)	/* get PS */
+	stq	$1, 8($sp)
+	stq	$2, 16($sp)
+	stq	$3, 24($sp)
+	and	$0, 8, $0		/* user mode? */
+	stq	$4, 32($sp)
+	bne	$0, entUnaUser	/* yup -> do user-level unaligned fault */
+	stq	$5, 40($sp)
+	stq	$6, 48($sp)
+	stq	$7, 56($sp)
+	stq	$8, 64($sp)
+	stq	$9, 72($sp)
+	stq	$10, 80($sp)
+	stq	$11, 88($sp)
+	stq	$12, 96($sp)
+	stq	$13, 104($sp)
+	stq	$14, 112($sp)
+	stq	$15, 120($sp)
+	/* 16-18 PAL-saved */
+	stq	$19, 152($sp)
+	stq	$20, 160($sp)
+	stq	$21, 168($sp)
+	stq	$22, 176($sp)
+	stq	$23, 184($sp)
+	stq	$24, 192($sp)
+	stq	$25, 200($sp)
+	stq	$26, 208($sp)
+	stq	$27, 216($sp)
+	stq	$28, 224($sp)
+	mov	$sp, $19
+	stq	$gp, 232($sp)
+	.cfi_rel_offset	$1, 1*8
+	.cfi_rel_offset	$2, 2*8
+	.cfi_rel_offset	$3, 3*8
+	.cfi_rel_offset	$4, 4*8
+	.cfi_rel_offset	$5, 5*8
+	.cfi_rel_offset	$6, 6*8
+	.cfi_rel_offset	$7, 7*8
+	.cfi_rel_offset	$8, 8*8
+	.cfi_rel_offset	$9, 9*8
+	.cfi_rel_offset	$10, 10*8
+	.cfi_rel_offset	$11, 11*8
+	.cfi_rel_offset	$12, 12*8
+	.cfi_rel_offset	$13, 13*8
+	.cfi_rel_offset	$14, 14*8
+	.cfi_rel_offset	$15, 15*8
+	.cfi_rel_offset	$19, 19*8
+	.cfi_rel_offset	$20, 20*8
+	.cfi_rel_offset	$21, 21*8
+	.cfi_rel_offset	$22, 22*8
+	.cfi_rel_offset	$23, 23*8
+	.cfi_rel_offset	$24, 24*8
+	.cfi_rel_offset	$25, 25*8
+	.cfi_rel_offset	$26, 26*8
+	.cfi_rel_offset	$27, 27*8
+	.cfi_rel_offset	$28, 28*8
+	.cfi_rel_offset	$29, 29*8
+	lda	$8, 0x3fff
+	stq	$31, 248($sp)
+	bic	$sp, $8, $8
+	jsr	$26, do_entUna
+	ldq	$0, 0($sp)
+	ldq	$1, 8($sp)
+	ldq	$2, 16($sp)
+	ldq	$3, 24($sp)
+	ldq	$4, 32($sp)
+	ldq	$5, 40($sp)
+	ldq	$6, 48($sp)
+	ldq	$7, 56($sp)
+	ldq	$8, 64($sp)
+	ldq	$9, 72($sp)
+	ldq	$10, 80($sp)
+	ldq	$11, 88($sp)
+	ldq	$12, 96($sp)
+	ldq	$13, 104($sp)
+	ldq	$14, 112($sp)
+	ldq	$15, 120($sp)
+	/* 16-18 PAL-saved */
+	ldq	$19, 152($sp)
+	ldq	$20, 160($sp)
+	ldq	$21, 168($sp)
+	ldq	$22, 176($sp)
+	ldq	$23, 184($sp)
+	ldq	$24, 192($sp)
+	ldq	$25, 200($sp)
+	ldq	$26, 208($sp)
+	ldq	$27, 216($sp)
+	ldq	$28, 224($sp)
+	ldq	$gp, 232($sp)
+	lda	$sp, 256($sp)
+	.cfi_restore	$1
+	.cfi_restore	$2
+	.cfi_restore	$3
+	.cfi_restore	$4
+	.cfi_restore	$5
+	.cfi_restore	$6
+	.cfi_restore	$7
+	.cfi_restore	$8
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_restore	$19
+	.cfi_restore	$20
+	.cfi_restore	$21
+	.cfi_restore	$22
+	.cfi_restore	$23
+	.cfi_restore	$24
+	.cfi_restore	$25
+	.cfi_restore	$26
+	.cfi_restore	$27
+	.cfi_restore	$28
+	.cfi_restore	$29
+	.cfi_adjust_cfa_offset	-256
+	call_pal PAL_rti
+
+	.align	4
+entUnaUser:
+	.cfi_restore_state
+	ldq	$0, 0($sp)	/* restore original $0 */
+	lda	$sp, 256($sp)	/* pop entUna's stack frame */
+	.cfi_restore	$0
+	.cfi_adjust_cfa_offset	-256
+	SAVE_ALL		/* setup normal kernel stack */
+	lda	$sp, -56($sp)
+	.cfi_adjust_cfa_offset	56
+	stq	$9, 0($sp)
+	stq	$10, 8($sp)
+	stq	$11, 16($sp)
+	stq	$12, 24($sp)
+	stq	$13, 32($sp)
+	stq	$14, 40($sp)
+	stq	$15, 48($sp)
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
+	lda	$8, 0x3fff
+	addq	$sp, 56, $19
+	bic	$sp, $8, $8
+	jsr	$26, do_entUnaUser
+	ldq	$9, 0($sp)
+	ldq	$10, 8($sp)
+	ldq	$11, 16($sp)
+	ldq	$12, 24($sp)
+	ldq	$13, 32($sp)
+	ldq	$14, 40($sp)
+	ldq	$15, 48($sp)
+	lda	$sp, 56($sp)
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-56
+	br	ret_from_sys_call
+CFI_END_OSF_FRAME entUna
+
+CFI_START_OSF_FRAME entDbg
+	SAVE_ALL
+	lda	$8, 0x3fff
+	lda	$26, ret_from_sys_call
+	bic	$sp, $8, $8
+	mov	$sp, $16
+	jsr	$31, do_entDbg
+CFI_END_OSF_FRAME entDbg
+
+/*
+ * The system call entry point is special.  Most importantly, it looks
+ * like a function call to userspace as far as clobbered registers.  We
+ * do preserve the argument registers (for syscall restarts) and $26
+ * (for leaf syscall functions).
+ *
+ * So much for theory.  We don't take advantage of this yet.
+ *
+ * Note that a0-a2 are not saved by PALcode as with the other entry points.
+ */
+
+	.align	4
+	.globl	entSys
+	.type	entSys, @function
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa	$sp, 48
+	.cfi_rel_offset	64, 8
+	.cfi_rel_offset	$gp, 16
+entSys:
+	SAVE_ALL
+	lda	$8, 0x3fff
+	bic	$sp, $8, $8
+	lda	$4, NR_syscalls($31)
+	stq	$16, SP_OFF+24($sp)
+	lda	$5, sys_call_table
+	lda	$27, sys_ni_syscall
+	cmpult	$0, $4, $4
+	ldl	$3, TI_FLAGS($8)
+	stq	$17, SP_OFF+32($sp)
+	s8addq	$0, $5, $5
+	stq	$18, SP_OFF+40($sp)
+	.cfi_rel_offset	$16, SP_OFF+24
+	.cfi_rel_offset	$17, SP_OFF+32
+	.cfi_rel_offset	$18, SP_OFF+40
+#ifdef CONFIG_AUDITSYSCALL
+	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	and     $3, $6, $3
+	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
+	beq	$4, 1f
+	ldq	$27, 0($5)
+1:	jsr	$26, ($27), sys_ni_syscall
+	ldgp	$gp, 0($26)
+	blt	$0, $syscall_error	/* the call failed */
+$ret_success:
+	stq	$0, 0($sp)
+	stq	$31, 72($sp)		/* a3=0 => no error */
+
+	.align	4
+	.globl	ret_from_sys_call
+ret_from_sys_call:
+	cmovne	$26, 0, $18		/* $18 = 0 => non-restartable */
+	ldq	$0, SP_OFF($sp)
+	and	$0, 8, $0
+	beq	$0, ret_to_kernel
+ret_to_user:
+	/* Make sure need_resched and sigpending don't change between
+		sampling and the rti.  */
+	lda	$16, 7
+	call_pal PAL_swpipl
+	ldl	$17, TI_FLAGS($8)
+	and	$17, _TIF_WORK_MASK, $2
+	bne	$2, work_pending
+restore_all:
+	ldl	$2, TI_STATUS($8)
+	and	$2, TS_SAVED_FP | TS_RESTORE_FP, $3
+	bne	$3, restore_fpu
+restore_other:
+	.cfi_remember_state
+	RESTORE_ALL
+	call_pal PAL_rti
+
+ret_to_kernel:
+	.cfi_restore_state
+	lda	$16, 7
+	call_pal PAL_swpipl
+	br restore_other
+
+	.align 3
+$syscall_error:
+	/*
+	 * Some system calls (e.g., ptrace) can return arbitrary
+	 * values which might normally be mistaken as error numbers.
+	 * Those functions must zero $0 (v0) directly in the stack
+	 * frame to indicate that a negative return value wasn't an
+	 * error number..
+	 */
+	ldq	$18, 0($sp)	/* old syscall nr (zero if success) */
+	beq	$18, $ret_success
+
+	ldq	$19, 72($sp)	/* .. and this a3 */
+	subq	$31, $0, $0	/* with error in v0 */
+	addq	$31, 1, $1	/* set a3 for errno return */
+	stq	$0, 0($sp)
+	mov	$31, $26	/* tell "ret_from_sys_call" we can restart */
+	stq	$1, 72($sp)	/* a3 for return */
+	br	ret_from_sys_call
+
+/*
+ * Do all cleanup when returning from all interrupts and system calls.
+ *
+ * Arguments:
+ *       $8: current.
+ *      $17: TI_FLAGS.
+ *      $18: The old syscall number, or zero if this is not a return
+ *           from a syscall that errored and is possibly restartable.
+ *      $19: The old a3 value
+ */
+
+	.align	4
+	.type	work_pending, @function
+work_pending:
+	and	$17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL, $2
+	bne	$2, $work_notifysig
+
+$work_resched:
+	/*
+	 * We can get here only if we returned from syscall without SIGPENDING
+	 * or got through work_notifysig already.  Either case means no syscall
+	 * restarts for us, so let $18 and $19 burn.
+	 */
+	jsr	$26, schedule
+	mov	0, $18
+	br	ret_to_user
+
+$work_notifysig:
+	mov	$sp, $16
+	DO_SWITCH_STACK
+	jsr	$26, do_work_pending
+	UNDO_SWITCH_STACK
+	br	restore_all
+
+/*
+ * PTRACE syscall handler
+ */
+
+	.align	4
+	.type	strace, @function
+strace:
+	/* set up signal stack, call syscall_trace */
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
+	DO_SWITCH_STACK
+	jsr	$26, syscall_trace_enter /* returns the syscall number */
+	UNDO_SWITCH_STACK
+
+	/* get the arguments back.. */
+	ldq	$16, SP_OFF+24($sp)
+	ldq	$17, SP_OFF+32($sp)
+	ldq	$18, SP_OFF+40($sp)
+	ldq	$19, 72($sp)
+	ldq	$20, 80($sp)
+	ldq	$21, 88($sp)
+
+	/* get the system call pointer.. */
+	lda	$1, NR_syscalls($31)
+	lda	$2, sys_call_table
+	lda	$27, sys_ni_syscall
+	cmpult	$0, $1, $1
+	s8addq	$0, $2, $2
+	beq	$1, 1f
+	ldq	$27, 0($2)
+1:	jsr	$26, ($27), sys_gettimeofday
+ret_from_straced:
+	ldgp	$gp, 0($26)
+
+	/* check return.. */
+	blt	$0, $strace_error	/* the call failed */
+$strace_success:
+	stq	$31, 72($sp)		/* a3=0 => no error */
+	stq	$0, 0($sp)		/* save return value */
+
+	DO_SWITCH_STACK
+	jsr	$26, syscall_trace_leave
+	UNDO_SWITCH_STACK
+	br	$31, ret_from_sys_call
+
+	.align	3
+$strace_error:
+	ldq	$18, 0($sp)	/* old syscall nr (zero if success) */
+	beq	$18, $strace_success
+	ldq	$19, 72($sp)	/* .. and this a3 */
+
+	subq	$31, $0, $0	/* with error in v0 */
+	addq	$31, 1, $1	/* set a3 for errno return */
+	stq	$0, 0($sp)
+	stq	$1, 72($sp)	/* a3 for return */
+
+	DO_SWITCH_STACK
+	mov	$18, $9		/* save old syscall number */
+	mov	$19, $10	/* save old a3 */
+	jsr	$26, syscall_trace_leave
+	mov	$9, $18
+	mov	$10, $19
+	UNDO_SWITCH_STACK
+
+	mov	$31, $26	/* tell "ret_from_sys_call" we can restart */
+	br	ret_from_sys_call
+CFI_END_OSF_FRAME entSys
+
+/*
+ * Save and restore the switch stack -- aka the balance of the user context.
+ */
+
+	.align	4
+	.type	do_switch_stack, @function
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa $sp, 0
+	.cfi_register 64, $1
+do_switch_stack:
+	lda	$sp, -SWITCH_STACK_SIZE($sp)
+	.cfi_adjust_cfa_offset	SWITCH_STACK_SIZE
+	stq	$9, 0($sp)
+	stq	$10, 8($sp)
+	stq	$11, 16($sp)
+	stq	$12, 24($sp)
+	stq	$13, 32($sp)
+	stq	$14, 40($sp)
+	stq	$15, 48($sp)
+	stq	$26, 56($sp)
+	ret	$31, ($1), 1
+	.cfi_endproc
+	.size	do_switch_stack, .-do_switch_stack
+
+	.align	4
+	.type	undo_switch_stack, @function
+	.cfi_startproc simple
+	.cfi_def_cfa $sp, 0
+	.cfi_register 64, $1
+undo_switch_stack:
+	ldq	$9, 0($sp)
+	ldq	$10, 8($sp)
+	ldq	$11, 16($sp)
+	ldq	$12, 24($sp)
+	ldq	$13, 32($sp)
+	ldq	$14, 40($sp)
+	ldq	$15, 48($sp)
+	ldq	$26, 56($sp)
+	lda	$sp, SWITCH_STACK_SIZE($sp)
+	ret	$31, ($1), 1
+	.cfi_endproc
+	.size	undo_switch_stack, .-undo_switch_stack
+
+#define FR(n) n * 8 + TI_FP($8)
+	.align	4
+	.globl	__save_fpu
+	.type	__save_fpu, @function
+__save_fpu:
+#define V(n) stt	$f##n, FR(n)
+	V( 0); V( 1); V( 2); V( 3)
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	mf_fpcr	$f0		# get fpcr
+	V(28); V(29); V(30)
+	stt	$f0, FR(31)	# save fpcr in slot of $f31
+	ldt	$f0, FR(0)	# don't let "__save_fpu" change fp state.
+	ret
+#undef V
+	.size	__save_fpu, .-__save_fpu
+
+	.align	4
+restore_fpu:
+	and	$3, TS_RESTORE_FP, $3
+	bic	$2, TS_SAVED_FP | TS_RESTORE_FP, $2
+	beq	$3, 1f
+#define V(n) ldt	$f##n, FR(n)
+	ldt	$f30, FR(31)	# get saved fpcr
+	V( 0); V( 1); V( 2); V( 3)
+	mt_fpcr	$f30		# install saved fpcr
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	V(28); V(29); V(30)
+1:	stl $2, TI_STATUS($8)
+	br restore_other
+#undef V
+
+
+/*
+ * The meat of the context switch code.
+ */
+	.align	4
+	.globl	alpha_switch_to
+	.type	alpha_switch_to, @function
+	.cfi_startproc
+alpha_switch_to:
+	DO_SWITCH_STACK
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_RESTORE_FP, $3
+	bne	$3, 1f
+	or	$1, TS_RESTORE_FP | TS_SAVED_FP, $2
+	and	$1, TS_SAVED_FP, $3
+	stl	$2, TI_STATUS($8)
+	bne	$3, 1f
+	bsr	$26, __save_fpu
+1:
+	call_pal PAL_swpctx
+	lda	$8, 0x3fff
+	UNDO_SWITCH_STACK
+	bic	$sp, $8, $8
+	mov	$17, $0
+	ret
+	.cfi_endproc
+	.size	alpha_switch_to, .-alpha_switch_to
+
+/*
+ * New processes begin life here.
+ */
+
+	.globl	ret_from_fork
+	.align	4
+	.ent	ret_from_fork
+ret_from_fork:
+	lda	$26, ret_to_user
+	mov	$17, $16
+	jmp	$31, schedule_tail
+.end ret_from_fork
+
+/*
+ * ... and new kernel threads - here
+ */
+	.align 4
+	.globl	ret_from_kernel_thread
+	.ent	ret_from_kernel_thread
+ret_from_kernel_thread:
+	mov	$17, $16
+	jsr	$26, schedule_tail
+	mov	$9, $27
+	mov	$10, $16
+	jsr	$26, ($9)
+	br	$31, ret_to_user
+.end ret_from_kernel_thread
+
+
+/*
+ * Special system calls.  Most of these are special in that they either
+ * have to play switch_stack games.
+ */
+
+.macro	fork_like name
+	.align	4
+	.globl	alpha_\name
+	.ent	alpha_\name
+alpha_\name:
+	.prologue 0
+	bsr	$1, do_switch_stack
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
+	jsr	$26, sys_\name
+	ldq	$26, 56($sp)
+	lda	$sp, SWITCH_STACK_SIZE($sp)
+	ret
+.end	alpha_\name
+.endm
+
+fork_like fork
+fork_like vfork
+fork_like clone
+
+.macro	sigreturn_like name
+	.align	4
+	.globl	sys_\name
+	.ent	sys_\name
+sys_\name:
+	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
+	lda	$sp, -SWITCH_STACK_SIZE($sp)
+	jsr	$26, do_\name
+	bne	$9, 1f
+	jsr	$26, syscall_trace_leave
+1:	br	$1, undo_switch_stack
+	br	ret_from_sys_call
+.end sys_\name
+.endm
+
+sigreturn_like sigreturn
+sigreturn_like rt_sigreturn
+
+	.align	4
+	.globl	alpha_syscall_zero
+	.ent	alpha_syscall_zero
+alpha_syscall_zero:
+	.prologue 0
+	/* Special because it needs to do something opposite to
+	   force_successful_syscall_return().  We use the saved
+	   syscall number for that, zero meaning "not an error".
+	   That works nicely, but for real syscall 0 we need to
+	   make sure that this logics doesn't get confused.
+	   Store a non-zero there - -ENOSYS we need in register
+	   for our return value will do just fine.
+	  */
+	lda	$0, -ENOSYS
+	unop
+	stq	$0, 0($sp)
+	ret
+.end alpha_syscall_zero
diff --git a/arch/alpha/kernel/err_common.c b/arch/alpha/kernel/err_common.c
new file mode 100644
index 0000000000..94e1b3dcf6
--- /dev/null
+++ b/arch/alpha/kernel/err_common.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/err_common.c
+ *
+ *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
+ *
+ *	Error handling code supporting Alpha systems
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+
+#include <asm/io.h>
+#include <asm/hwrpb.h>
+#include <asm/smp.h>
+#include <asm/err_common.h>
+
+#include "err_impl.h"
+#include "proto.h"
+
+/*
+ * err_print_prefix -- error handling print routines should prefix
+ * all prints with this
+ */
+char *err_print_prefix = KERN_NOTICE;
+
+
+/*
+ * Generic
+ */
+void
+mchk_dump_mem(void *data, size_t length, char **annotation)
+{
+	unsigned long *ldata = data;
+	size_t i;
+	
+	for (i = 0; (i * sizeof(*ldata)) < length; i++) {
+		if (annotation && !annotation[i]) 
+			annotation = NULL;
+		printk("%s    %08x: %016lx    %s\n",
+		       err_print_prefix,
+		       (unsigned)(i * sizeof(*ldata)), ldata[i],
+		       annotation ? annotation[i] : "");
+	}
+}
+
+void
+mchk_dump_logout_frame(struct el_common *mchk_header)
+{
+	printk("%s  -- Frame Header --\n"
+	         "    Frame Size:   %d (0x%x) bytes\n"
+	         "    Flags:        %s%s\n"
+	         "    MCHK Code:    0x%x\n"
+	         "    Frame Rev:    %d\n"
+	         "    Proc Offset:  0x%08x\n"
+	         "    Sys Offset:   0x%08x\n"
+  	         "  -- Processor Region --\n",
+	       err_print_prefix, 
+	       mchk_header->size, mchk_header->size,
+	       mchk_header->retry ? "RETRY " : "", 
+  	         mchk_header->err2 ? "SECOND_ERR " : "",
+	       mchk_header->code,
+	       mchk_header->frame_rev,
+	       mchk_header->proc_offset,
+	       mchk_header->sys_offset);
+
+	mchk_dump_mem((void *)
+		      ((unsigned long)mchk_header + mchk_header->proc_offset),
+		      mchk_header->sys_offset - mchk_header->proc_offset,
+		      NULL);
+	
+	printk("%s  -- System Region --\n", err_print_prefix);
+	mchk_dump_mem((void *)
+		      ((unsigned long)mchk_header + mchk_header->sys_offset),
+		      mchk_header->size - mchk_header->sys_offset,
+		      NULL);
+	printk("%s  -- End of Frame --\n", err_print_prefix);
+}
+
+
+/*
+ * Console Data Log
+ */
+/* Data */
+static struct el_subpacket_handler *subpacket_handler_list = NULL;
+static struct el_subpacket_annotation *subpacket_annotation_list = NULL;
+
+static struct el_subpacket *
+el_process_header_subpacket(struct el_subpacket *header)
+{
+	union el_timestamp timestamp;
+	char *name = "UNKNOWN EVENT";
+	int packet_count = 0;
+	int length = 0;
+
+	if (header->class != EL_CLASS__HEADER) {
+		printk("%s** Unexpected header CLASS %d TYPE %d, aborting\n",
+		       err_print_prefix,
+		       header->class, header->type);
+		return NULL;
+	}
+
+	switch(header->type) {
+	case EL_TYPE__HEADER__SYSTEM_ERROR_FRAME:
+		name = "SYSTEM ERROR";
+		length = header->by_type.sys_err.frame_length;
+		packet_count = 
+			header->by_type.sys_err.frame_packet_count;
+		timestamp.as_int = 0;
+		break;
+	case EL_TYPE__HEADER__SYSTEM_EVENT_FRAME:
+		name = "SYSTEM EVENT";
+		length = header->by_type.sys_event.frame_length;
+		packet_count = 
+			header->by_type.sys_event.frame_packet_count;
+		timestamp = header->by_type.sys_event.timestamp;
+		break;
+	case EL_TYPE__HEADER__HALT_FRAME:
+		name = "ERROR HALT";
+		length = header->by_type.err_halt.frame_length;
+		packet_count = 
+			header->by_type.err_halt.frame_packet_count;
+		timestamp = header->by_type.err_halt.timestamp;
+		break;
+	case EL_TYPE__HEADER__LOGOUT_FRAME:
+		name = "LOGOUT FRAME";
+		length = header->by_type.logout_header.frame_length;
+		packet_count = 1;
+		timestamp.as_int = 0;
+		break;
+	default: /* Unknown */
+		printk("%s** Unknown header - CLASS %d TYPE %d, aborting\n",
+		       err_print_prefix,
+		       header->class, header->type);
+		return NULL;		
+	}
+
+	printk("%s*** %s:\n"
+	         "  CLASS %d, TYPE %d\n", 
+	       err_print_prefix,
+	       name,
+	       header->class, header->type);
+	el_print_timestamp(&timestamp);
+	
+	/*
+	 * Process the subpackets
+	 */
+	el_process_subpackets(header, packet_count);
+
+	/* return the next header */
+	header = (struct el_subpacket *)
+		((unsigned long)header + header->length + length);
+	return header;
+}
+
+static struct el_subpacket *
+el_process_subpacket_reg(struct el_subpacket *header)
+{
+	struct el_subpacket *next = NULL;
+	struct el_subpacket_handler *h = subpacket_handler_list;
+
+	for (; h && h->class != header->class; h = h->next);
+	if (h) next = h->handler(header);
+
+	return next;
+}
+
+void
+el_print_timestamp(union el_timestamp *timestamp)
+{
+	if (timestamp->as_int)
+		printk("%s  TIMESTAMP: %d/%d/%02d %d:%02d:%0d\n", 
+		       err_print_prefix,
+		       timestamp->b.month, timestamp->b.day,
+		       timestamp->b.year, timestamp->b.hour,
+		       timestamp->b.minute, timestamp->b.second);
+}
+
+void
+el_process_subpackets(struct el_subpacket *header, int packet_count)
+{
+	struct el_subpacket *subpacket;
+	int i;
+
+	subpacket = (struct el_subpacket *)
+		((unsigned long)header + header->length);
+
+	for (i = 0; subpacket && i < packet_count; i++) {
+		printk("%sPROCESSING SUBPACKET %d\n", err_print_prefix, i);
+		subpacket = el_process_subpacket(subpacket);
+	}
+}
+
+struct el_subpacket *
+el_process_subpacket(struct el_subpacket *header)
+{
+	struct el_subpacket *next = NULL;
+
+	switch(header->class) {
+	case EL_CLASS__TERMINATION:
+		/* Termination packet, there are no more */
+		break;
+	case EL_CLASS__HEADER: 
+		next = el_process_header_subpacket(header);
+		break;
+	default:
+		if (NULL == (next = el_process_subpacket_reg(header))) {
+			printk("%s** Unexpected header CLASS %d TYPE %d"
+			       " -- aborting.\n",
+			       err_print_prefix,
+			       header->class, header->type);
+		}
+		break;
+	}
+
+	return next;
+}
+
+void 
+el_annotate_subpacket(struct el_subpacket *header)
+{
+	struct el_subpacket_annotation *a;
+	char **annotation = NULL;
+
+	for (a = subpacket_annotation_list; a; a = a->next) {
+		if (a->class == header->class &&
+		    a->type == header->type &&
+		    a->revision == header->revision) {
+			/*
+			 * We found the annotation
+			 */
+			annotation = a->annotation;
+			printk("%s  %s\n", err_print_prefix, a->description);
+			break;
+		}
+	}
+
+	mchk_dump_mem(header, header->length, annotation);
+}
+
+static void __init
+cdl_process_console_data_log(int cpu, struct percpu_struct *pcpu)
+{
+	struct el_subpacket *header = (struct el_subpacket *)
+		(IDENT_ADDR | pcpu->console_data_log_pa);
+	int err;
+
+	printk("%s******* CONSOLE DATA LOG FOR CPU %d. *******\n"
+	         "*** Error(s) were logged on a previous boot\n",
+	       err_print_prefix, cpu);
+	
+	for (err = 0; header && (header->class != EL_CLASS__TERMINATION); err++)
+		header = el_process_subpacket(header);
+
+	/* let the console know it's ok to clear the error(s) at restart */
+	pcpu->console_data_log_pa = 0;
+
+	printk("%s*** %d total error(s) logged\n"
+	         "**** END OF CONSOLE DATA LOG FOR CPU %d ****\n", 
+	       err_print_prefix, err, cpu);
+}
+
+void __init
+cdl_check_console_data_log(void)
+{
+	struct percpu_struct *pcpu;
+	unsigned long cpu;
+
+	for (cpu = 0; cpu < hwrpb->nr_processors; cpu++) {
+		pcpu = (struct percpu_struct *)
+			((unsigned long)hwrpb + hwrpb->processor_offset 
+			 + cpu * hwrpb->processor_size);
+		if (pcpu->console_data_log_pa)
+			cdl_process_console_data_log(cpu, pcpu);
+	}
+
+}
+
+int __init
+cdl_register_subpacket_annotation(struct el_subpacket_annotation *new)
+{
+	struct el_subpacket_annotation *a = subpacket_annotation_list;
+
+	if (a == NULL) subpacket_annotation_list = new;
+	else {
+		for (; a->next != NULL; a = a->next) {
+			if ((a->class == new->class && a->type == new->type) ||
+			    a == new) {
+				printk("Attempted to re-register "
+				       "subpacket annotation\n");
+				return -EINVAL;
+			}
+		}
+		a->next = new;
+	}
+	new->next = NULL;
+
+	return 0;
+}
+
+int __init
+cdl_register_subpacket_handler(struct el_subpacket_handler *new)
+{
+	struct el_subpacket_handler *h = subpacket_handler_list;
+
+	if (h == NULL) subpacket_handler_list = new;
+	else {
+		for (; h->next != NULL; h = h->next) {
+			if (h->class == new->class || h == new) {
+				printk("Attempted to re-register "
+				       "subpacket handler\n");
+				return -EINVAL;
+			}
+		}
+		h->next = new;
+	}
+	new->next = NULL;
+
+	return 0;
+}
+
diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c
new file mode 100644
index 0000000000..8144f2045b
--- /dev/null
+++ b/arch/alpha/kernel/err_ev6.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/err_ev6.c
+ *
+ *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
+ *
+ *	Error handling code supporting Alpha systems
+ */
+
+#include <linux/sched.h>
+
+#include <asm/io.h>
+#include <asm/irq_regs.h>
+#include <asm/hwrpb.h>
+#include <asm/smp.h>
+#include <asm/err_common.h>
+#include <asm/err_ev6.h>
+
+#include "err_impl.h"
+#include "proto.h"
+
+static int
+ev6_parse_ibox(u64 i_stat, int print)
+{
+	int status = MCHK_DISPOSITION_REPORT;
+
+#define EV6__I_STAT__PAR	(1UL << 29)
+#define EV6__I_STAT__ERRMASK	(EV6__I_STAT__PAR)
+
+	if (!(i_stat & EV6__I_STAT__ERRMASK))
+		return MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+	if (!print)
+		return status;
+
+	if (i_stat & EV6__I_STAT__PAR)
+		printk("%s    Icache parity error\n", err_print_prefix);
+
+	return status;
+}
+
+static int
+ev6_parse_mbox(u64 mm_stat, u64 d_stat, u64 c_stat, int print)
+{
+	int status = MCHK_DISPOSITION_REPORT;
+
+#define EV6__MM_STAT__DC_TAG_PERR	(1UL << 10)
+#define EV6__MM_STAT__ERRMASK		(EV6__MM_STAT__DC_TAG_PERR)
+#define EV6__D_STAT__TPERR_P0		(1UL << 0)
+#define EV6__D_STAT__TPERR_P1		(1UL << 1)
+#define EV6__D_STAT__ECC_ERR_ST		(1UL << 2)
+#define EV6__D_STAT__ECC_ERR_LD		(1UL << 3)
+#define EV6__D_STAT__SEO		(1UL << 4)
+#define EV6__D_STAT__ERRMASK		(EV6__D_STAT__TPERR_P0 |	\
+                                         EV6__D_STAT__TPERR_P1 | 	\
+                                         EV6__D_STAT__ECC_ERR_ST | 	\
+                                         EV6__D_STAT__ECC_ERR_LD | 	\
+                                         EV6__D_STAT__SEO)
+
+	if (!(d_stat & EV6__D_STAT__ERRMASK) && 
+	    !(mm_stat & EV6__MM_STAT__ERRMASK))
+		return MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+	if (!print)
+		return status;
+
+	if (mm_stat & EV6__MM_STAT__DC_TAG_PERR)
+		printk("%s    Dcache tag parity error on probe\n",
+		       err_print_prefix);
+	if (d_stat & EV6__D_STAT__TPERR_P0)
+		printk("%s    Dcache tag parity error - pipe 0\n",
+		       err_print_prefix);
+	if (d_stat & EV6__D_STAT__TPERR_P1)
+		printk("%s    Dcache tag parity error - pipe 1\n",
+		       err_print_prefix);
+	if (d_stat & EV6__D_STAT__ECC_ERR_ST)
+		printk("%s    ECC error occurred on a store\n", 
+		       err_print_prefix);
+	if (d_stat & EV6__D_STAT__ECC_ERR_LD)
+		printk("%s    ECC error occurred on a %s load\n",
+		       err_print_prefix,
+		       c_stat ? "" : "speculative ");
+	if (d_stat & EV6__D_STAT__SEO)
+		printk("%s    Dcache second error\n", err_print_prefix);
+
+	return status;
+}
+
+static int
+ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn, 
+	       u64 c_stat, u64 c_sts, int print)
+{
+	static const char * const sourcename[] = {
+		"UNKNOWN", "UNKNOWN", "UNKNOWN",
+		"MEMORY", "BCACHE", "DCACHE",
+		"BCACHE PROBE", "BCACHE PROBE"
+	};
+	static const char * const streamname[] = { "D", "I" };
+	static const char * const bitsname[] = { "SINGLE", "DOUBLE" };
+	int status = MCHK_DISPOSITION_REPORT;
+	int source = -1, stream = -1, bits = -1;
+
+#define EV6__C_STAT__BC_PERR		(0x01)
+#define EV6__C_STAT__DC_PERR		(0x02)
+#define EV6__C_STAT__DSTREAM_MEM_ERR	(0x03)
+#define EV6__C_STAT__DSTREAM_BC_ERR	(0x04)
+#define EV6__C_STAT__DSTREAM_DC_ERR	(0x05)
+#define EV6__C_STAT__PROBE_BC_ERR0	(0x06)	/* both 6 and 7 indicate... */
+#define EV6__C_STAT__PROBE_BC_ERR1	(0x07)	/* ...probe bc error.       */
+#define EV6__C_STAT__ISTREAM_MEM_ERR	(0x0B)
+#define EV6__C_STAT__ISTREAM_BC_ERR	(0x0C)
+#define EV6__C_STAT__DSTREAM_MEM_DBL	(0x13)
+#define EV6__C_STAT__DSTREAM_BC_DBL	(0x14)
+#define EV6__C_STAT__ISTREAM_MEM_DBL	(0x1B)
+#define EV6__C_STAT__ISTREAM_BC_DBL	(0x1C)
+#define EV6__C_STAT__SOURCE_MEMORY	(0x03)
+#define EV6__C_STAT__SOURCE_BCACHE	(0x04)
+#define EV6__C_STAT__SOURCE__S		(0)
+#define EV6__C_STAT__SOURCE__M 		(0x07)
+#define EV6__C_STAT__ISTREAM__S		(3)
+#define EV6__C_STAT__ISTREAM__M		(0x01)
+#define EV6__C_STAT__DOUBLE__S		(4)
+#define EV6__C_STAT__DOUBLE__M		(0x01)
+#define EV6__C_STAT__ERRMASK		(0x1F)
+#define EV6__C_STS__SHARED		(1 << 0)
+#define EV6__C_STS__DIRTY		(1 << 1)
+#define EV6__C_STS__VALID		(1 << 2)
+#define EV6__C_STS__PARITY		(1 << 3)
+
+	if (!(c_stat & EV6__C_STAT__ERRMASK))
+		return MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+	if (!print)
+		return status;
+
+	source = EXTRACT(c_stat, EV6__C_STAT__SOURCE);
+	stream = EXTRACT(c_stat, EV6__C_STAT__ISTREAM);
+	bits = EXTRACT(c_stat, EV6__C_STAT__DOUBLE);
+
+	if (c_stat & EV6__C_STAT__BC_PERR) {
+		printk("%s    Bcache tag parity error\n", err_print_prefix);
+		source = -1;
+	}
+
+	if (c_stat & EV6__C_STAT__DC_PERR) {
+		printk("%s    Dcache tag parity error\n", err_print_prefix);
+		source = -1;
+	}
+
+	if (c_stat == EV6__C_STAT__PROBE_BC_ERR0 ||
+	    c_stat == EV6__C_STAT__PROBE_BC_ERR1) {
+		printk("%s    Bcache single-bit error on a probe hit\n",
+		       err_print_prefix);
+		source = -1;
+	}
+
+	if (source != -1) 
+		printk("%s    %s-STREAM %s-BIT ECC error from %s\n",
+		       err_print_prefix,
+		       streamname[stream], bitsname[bits], sourcename[source]);
+
+	printk("%s    Address: 0x%016llx\n"
+	         "    Syndrome[upper.lower]: %02llx.%02llx\n",
+	       err_print_prefix,
+	       c_addr,
+	       c2_syn, c1_syn);
+
+	if (source == EV6__C_STAT__SOURCE_MEMORY ||
+	    source == EV6__C_STAT__SOURCE_BCACHE) 
+		printk("%s    Block status: %s%s%s%s\n",
+		       err_print_prefix,
+		       (c_sts & EV6__C_STS__SHARED) ? "SHARED " : "",
+		       (c_sts & EV6__C_STS__DIRTY)  ? "DIRTY "  : "",
+		       (c_sts & EV6__C_STS__VALID)  ? "VALID "  : "",
+		       (c_sts & EV6__C_STS__PARITY) ? "PARITY " : "");
+		
+	return status;
+}
+
+void
+ev6_register_error_handlers(void)
+{
+	/* None right now. */
+}
+
+int
+ev6_process_logout_frame(struct el_common *mchk_header, int print)
+{
+	struct el_common_EV6_mcheck *ev6mchk = 
+		(struct el_common_EV6_mcheck *)mchk_header;
+	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+	status |= ev6_parse_ibox(ev6mchk->I_STAT, print);
+	status |= ev6_parse_mbox(ev6mchk->MM_STAT, ev6mchk->DC_STAT, 
+				 ev6mchk->C_STAT, print);
+	status |= ev6_parse_cbox(ev6mchk->C_ADDR, ev6mchk->DC1_SYNDROME,
+				 ev6mchk->DC0_SYNDROME, ev6mchk->C_STAT,
+				 ev6mchk->C_STS, print);
+
+	if (!print)
+		return status;
+
+	if (status != MCHK_DISPOSITION_DISMISS) {
+		char *saved_err_prefix = err_print_prefix;
+
+		/*
+		 * Dump some additional information from the frame
+		 */
+		printk("%s    EXC_ADDR: 0x%016lx   IER_CM: 0x%016lx"
+		            "   ISUM: 0x%016lx\n"
+		         "    PAL_BASE: 0x%016lx   I_CTL:  0x%016lx"
+		            "   PCTX: 0x%016lx\n",
+		       err_print_prefix,
+		       ev6mchk->EXC_ADDR, ev6mchk->IER_CM, ev6mchk->ISUM,
+		       ev6mchk->PAL_BASE, ev6mchk->I_CTL, ev6mchk->PCTX);
+
+		if (status == MCHK_DISPOSITION_UNKNOWN_ERROR) {
+			printk("%s    UNKNOWN error, frame follows:\n",
+			       err_print_prefix);
+		} else {
+			/* had decode -- downgrade print level for frame */
+			err_print_prefix = KERN_NOTICE;
+		}
+
+		mchk_dump_logout_frame(mchk_header);
+
+		err_print_prefix = saved_err_prefix;
+	}
+
+	return status;
+}
+
+void
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	struct el_common *mchk_header = (struct el_common *)la_ptr;
+
+	/*
+	 * Sync the processor
+	 */
+	mb();
+	draina();
+
+	/*
+	 * Parse the logout frame without printing first. If the only error(s)
+	 * found are have a disposition of "dismiss", then just dismiss them
+	 * and don't print any message
+	 */
+	if (ev6_process_logout_frame(mchk_header, 0) != 
+	    MCHK_DISPOSITION_DISMISS) {
+		char *saved_err_prefix = err_print_prefix;
+		err_print_prefix = KERN_CRIT;
+
+		/*
+		 * Either a nondismissable error was detected or no
+		 * recognized error was detected  in the logout frame 
+		 * -- report the error in either case
+		 */
+		printk("%s*CPU %s Error (Vector 0x%x) reported on CPU %d:\n", 
+		       err_print_prefix,
+		       (vector == SCB_Q_PROCERR)?"Correctable":"Uncorrectable",
+		       (unsigned int)vector, (int)smp_processor_id());
+		
+		ev6_process_logout_frame(mchk_header, 1);
+		dik_show_regs(get_irq_regs(), NULL);
+
+		err_print_prefix = saved_err_prefix;
+	}
+
+	/* 
+	 * Release the logout frame 
+	 */
+	wrmces(0x7);
+	mb();
+}
+
diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c
new file mode 100644
index 0000000000..565de1acf1
--- /dev/null
+++ b/arch/alpha/kernel/err_ev7.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/err_ev7.c
+ *
+ *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
+ *
+ *	Error handling code supporting Alpha systems
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+
+#include <asm/io.h>
+#include <asm/hwrpb.h>
+#include <asm/smp.h>
+#include <asm/err_common.h>
+#include <asm/err_ev7.h>
+
+#include "err_impl.h"
+#include "proto.h"
+
+struct ev7_lf_subpackets *
+ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
+				    struct ev7_lf_subpackets *lf_subpackets)
+{
+	struct el_subpacket *subpacket;
+	int i;
+
+	/*
+	 * A Marvel machine check frame is always packaged in an
+	 * el_subpacket of class HEADER, type LOGOUT_FRAME.
+	 */
+	if (el_ptr->class != EL_CLASS__HEADER || 
+	    el_ptr->type != EL_TYPE__HEADER__LOGOUT_FRAME)
+		return NULL;
+
+	/*
+	 * It is a logout frame header. Look at the one subpacket.
+	 */
+	el_ptr = (struct el_subpacket *)
+		((unsigned long)el_ptr + el_ptr->length);
+
+	/*
+	 * It has to be class PAL, type LOGOUT_FRAME.
+	 */
+	if (el_ptr->class != EL_CLASS__PAL ||
+	    el_ptr->type != EL_TYPE__PAL__LOGOUT_FRAME)
+		return NULL;
+
+	lf_subpackets->logout = (struct ev7_pal_logout_subpacket *)
+		el_ptr->by_type.raw.data_start;
+
+	/*
+	 * Process the subpackets.
+	 */
+	subpacket = (struct el_subpacket *)
+		((unsigned long)el_ptr + el_ptr->length);
+	for (i = 0;
+	     subpacket && i < lf_subpackets->logout->subpacket_count;
+	     subpacket = (struct el_subpacket *)
+		     ((unsigned long)subpacket + subpacket->length), i++) {
+		/*
+		 * All subpackets should be class PAL.
+		 */
+		if (subpacket->class != EL_CLASS__PAL) {
+			printk("%s**UNEXPECTED SUBPACKET CLASS %d "
+			       "IN LOGOUT FRAME (packet %d\n",
+			       err_print_prefix, subpacket->class, i);
+			return NULL;
+		}
+
+		/*
+		 * Remember the subpacket.
+		 */
+		switch(subpacket->type) {
+		case EL_TYPE__PAL__EV7_PROCESSOR:
+			lf_subpackets->ev7 =
+				(struct ev7_pal_processor_subpacket *)
+				subpacket->by_type.raw.data_start;
+			break;
+
+		case EL_TYPE__PAL__EV7_RBOX:
+			lf_subpackets->rbox = (struct ev7_pal_rbox_subpacket *)
+				subpacket->by_type.raw.data_start;
+			break;
+
+		case EL_TYPE__PAL__EV7_ZBOX:
+			lf_subpackets->zbox = (struct ev7_pal_zbox_subpacket *)
+				subpacket->by_type.raw.data_start;
+			break;
+
+		case EL_TYPE__PAL__EV7_IO:
+			lf_subpackets->io = (struct ev7_pal_io_subpacket *)
+				subpacket->by_type.raw.data_start;
+			break;
+
+		case EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE:
+		case EL_TYPE__PAL__ENV__AIRMOVER_FAN:
+		case EL_TYPE__PAL__ENV__VOLTAGE:
+		case EL_TYPE__PAL__ENV__INTRUSION:
+		case EL_TYPE__PAL__ENV__POWER_SUPPLY:
+		case EL_TYPE__PAL__ENV__LAN:
+		case EL_TYPE__PAL__ENV__HOT_PLUG:
+			lf_subpackets->env[ev7_lf_env_index(subpacket->type)] =
+ 				(struct ev7_pal_environmental_subpacket *)
+				subpacket->by_type.raw.data_start;
+			break;
+				
+		default:
+			/*
+			 * Don't know what kind of frame this is.
+			 */
+			return NULL;
+		}
+	}
+
+	return lf_subpackets;
+}
+
+void
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
+	char *saved_err_prefix = err_print_prefix;
+
+	/*
+	 * Sync the processor
+	 */
+	mb();
+	draina();
+
+	err_print_prefix = KERN_CRIT;
+	printk("%s*CPU %s Error (Vector 0x%x) reported on CPU %d\n",
+	       err_print_prefix, 
+	       (vector == SCB_Q_PROCERR) ? "Correctable" : "Uncorrectable",
+	       (unsigned int)vector, (int)smp_processor_id());
+	el_process_subpacket(el_ptr);
+	err_print_prefix = saved_err_prefix;
+
+	/* 
+	 * Release the logout frame 
+	 */
+	wrmces(0x7);
+	mb();
+}
+
+static char *el_ev7_processor_subpacket_annotation[] = {
+	"Subpacket Header",	"I_STAT",	"DC_STAT",
+	"C_ADDR",		"C_SYNDROME_1",	"C_SYNDROME_0",
+	"C_STAT",		"C_STS",	"MM_STAT",
+	"EXC_ADDR",		"IER_CM",	"ISUM",
+	"PAL_BASE",		"I_CTL",	"PROCESS_CONTEXT",
+	"CBOX_CTL",		"CBOX_STP_CTL",	"CBOX_ACC_CTL",
+	"CBOX_LCL_SET",		"CBOX_GLB_SET",	"BBOX_CTL",
+	"BBOX_ERR_STS",		"BBOX_ERR_IDX",	"CBOX_DDP_ERR_STS",
+	"BBOX_DAT_RMP",		NULL
+};
+
+static char *el_ev7_zbox_subpacket_annotation[] = {
+	"Subpacket Header", 	
+	"ZBOX(0): DRAM_ERR_STATUS_2 / DRAM_ERR_STATUS_1",
+	"ZBOX(0): DRAM_ERROR_CTL    / DRAM_ERR_STATUS_3",
+	"ZBOX(0): DIFT_TIMEOUT      / DRAM_ERR_ADR",
+	"ZBOX(0): FRC_ERR_ADR       / DRAM_MAPPER_CTL",
+	"ZBOX(0): reserved          / DIFT_ERR_STATUS",
+	"ZBOX(1): DRAM_ERR_STATUS_2 / DRAM_ERR_STATUS_1",
+	"ZBOX(1): DRAM_ERROR_CTL    / DRAM_ERR_STATUS_3",
+	"ZBOX(1): DIFT_TIMEOUT      / DRAM_ERR_ADR",
+	"ZBOX(1): FRC_ERR_ADR       / DRAM_MAPPER_CTL",
+	"ZBOX(1): reserved          / DIFT_ERR_STATUS",
+	"CBOX_CTL",		"CBOX_STP_CTL",
+	"ZBOX(0)_ERROR_PA",	"ZBOX(1)_ERROR_PA",
+	"ZBOX(0)_ORED_SYNDROME","ZBOX(1)_ORED_SYNDROME",
+	NULL
+};
+
+static char *el_ev7_rbox_subpacket_annotation[] = {
+	"Subpacket Header",	"RBOX_CFG",	"RBOX_N_CFG",
+	"RBOX_S_CFG",		"RBOX_E_CFG",	"RBOX_W_CFG",
+	"RBOX_N_ERR",		"RBOX_S_ERR",	"RBOX_E_ERR",
+	"RBOX_W_ERR",		"RBOX_IO_CFG",	"RBOX_IO_ERR",
+	"RBOX_L_ERR",		"RBOX_WHOAMI",	"RBOX_IMASL",
+	"RBOX_INTQ",		"RBOX_INT",	NULL
+};
+
+static char *el_ev7_io_subpacket_annotation[] = {
+	"Subpacket Header",	"IO_ASIC_REV",	"IO_SYS_REV",
+	"IO7_UPH",		"HPI_CTL",	"CRD_CTL",
+	"HEI_CTL",		"PO7_ERROR_SUM","PO7_UNCRR_SYM",
+	"PO7_CRRCT_SYM",	"PO7_UGBGE_SYM","PO7_ERR_PKT0",
+	"PO7_ERR_PKT1",		"reserved",	"reserved",
+	"PO0_ERR_SUM",		"PO0_TLB_ERR",	"PO0_SPL_COMPLT",
+	"PO0_TRANS_SUM",	"PO0_FIRST_ERR","PO0_MULT_ERR",
+	"DM CSR PH",		"DM CSR PH",	"DM CSR PH",
+	"DM CSR PH",		"reserved",
+	"PO1_ERR_SUM",		"PO1_TLB_ERR",	"PO1_SPL_COMPLT",
+	"PO1_TRANS_SUM",	"PO1_FIRST_ERR","PO1_MULT_ERR",
+	"DM CSR PH",		"DM CSR PH",	"DM CSR PH",
+	"DM CSR PH",		"reserved",
+	"PO2_ERR_SUM",		"PO2_TLB_ERR",	"PO2_SPL_COMPLT",
+	"PO2_TRANS_SUM",	"PO2_FIRST_ERR","PO2_MULT_ERR",
+	"DM CSR PH",		"DM CSR PH",	"DM CSR PH",
+	"DM CSR PH",		"reserved",
+	"PO3_ERR_SUM",		"PO3_TLB_ERR",	"PO3_SPL_COMPLT",
+	"PO3_TRANS_SUM",	"PO3_FIRST_ERR","PO3_MULT_ERR",
+	"DM CSR PH",		"DM CSR PH",	"DM CSR PH",
+	"DM CSR PH",		"reserved",	
+	NULL
+};
+	
+static struct el_subpacket_annotation el_ev7_pal_annotations[] = {
+	SUBPACKET_ANNOTATION(EL_CLASS__PAL,
+			     EL_TYPE__PAL__EV7_PROCESSOR,
+			     1,
+			     "EV7 Processor Subpacket",
+			     el_ev7_processor_subpacket_annotation),
+	SUBPACKET_ANNOTATION(EL_CLASS__PAL,
+			     EL_TYPE__PAL__EV7_ZBOX,
+			     1,
+			     "EV7 ZBOX Subpacket",
+			     el_ev7_zbox_subpacket_annotation),
+	SUBPACKET_ANNOTATION(EL_CLASS__PAL,
+			     EL_TYPE__PAL__EV7_RBOX,
+			     1,
+			     "EV7 RBOX Subpacket",
+			     el_ev7_rbox_subpacket_annotation),
+	SUBPACKET_ANNOTATION(EL_CLASS__PAL,
+			     EL_TYPE__PAL__EV7_IO,
+			     1,
+			     "EV7 IO Subpacket",
+			     el_ev7_io_subpacket_annotation)
+};
+
+static struct el_subpacket *
+ev7_process_pal_subpacket(struct el_subpacket *header)
+{
+	struct ev7_pal_subpacket *packet;
+
+	if (header->class != EL_CLASS__PAL) {
+		printk("%s  ** Unexpected header CLASS %d TYPE %d, aborting\n",
+		       err_print_prefix,
+		       header->class, header->type);
+		return NULL;
+	}
+
+	packet = (struct ev7_pal_subpacket *)header->by_type.raw.data_start;
+
+	switch(header->type) {
+	case EL_TYPE__PAL__LOGOUT_FRAME:
+		printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
+		       err_print_prefix,
+		       packet->by_type.logout.whami, 
+		       packet->by_type.logout.rbox_whami);
+		el_print_timestamp(&packet->by_type.logout.timestamp);
+		printk("%s  EXC_ADDR: %016llx\n"
+		         "  HALT_CODE: %llx\n",
+		       err_print_prefix,
+		       packet->by_type.logout.exc_addr,
+		       packet->by_type.logout.halt_code);
+		el_process_subpackets(header,
+                                      packet->by_type.logout.subpacket_count);
+		break;
+	default:
+		printk("%s  ** PAL TYPE %d SUBPACKET\n", 
+		       err_print_prefix,
+		       header->type);
+		el_annotate_subpacket(header);
+		break;
+	}
+	
+	return (struct el_subpacket *)((unsigned long)header + header->length);
+}
+
+struct el_subpacket_handler ev7_pal_subpacket_handler =
+	SUBPACKET_HANDLER_INIT(EL_CLASS__PAL, ev7_process_pal_subpacket);
+
+void __init
+ev7_register_error_handlers(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(el_ev7_pal_annotations); i++)
+		cdl_register_subpacket_annotation(&el_ev7_pal_annotations[i]);
+
+	cdl_register_subpacket_handler(&ev7_pal_subpacket_handler);
+}
+
diff --git a/arch/alpha/kernel/err_impl.h b/arch/alpha/kernel/err_impl.h
new file mode 100644
index 0000000000..737b958a58
--- /dev/null
+++ b/arch/alpha/kernel/err_impl.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	linux/arch/alpha/kernel/err_impl.h
+ *
+ *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
+ *
+ *	Contains declarations and macros to support Alpha error handling
+ * 	implementations.
+ */
+
+#include <asm/mce.h>
+
+union el_timestamp;
+struct el_subpacket;
+struct ev7_lf_subpackets;
+
+struct el_subpacket_annotation {
+	struct el_subpacket_annotation *next;
+	u16 class;
+	u16 type;
+	u16 revision;
+	char *description;
+	char **annotation;
+};
+#define SUBPACKET_ANNOTATION(c, t, r, d, a) {NULL, (c), (t), (r), (d), (a)}
+
+struct el_subpacket_handler {
+	struct el_subpacket_handler *next;
+	u16 class;
+	struct el_subpacket *(*handler)(struct el_subpacket *);
+};
+#define SUBPACKET_HANDLER_INIT(c, h) {NULL, (c), (h)}
+
+/*
+ * Manipulate a field from a register given it's name. defines
+ * for the LSB (__S - shift count) and bitmask (__M) are required
+ *
+ * EXTRACT(u, f) - extracts the field and places it at bit position 0
+ * GEN_MASK(f) - creates an in-position mask for the field
+ */
+#define EXTRACT(u, f) (((u) >> f##__S) & f##__M)
+#define GEN_MASK(f) ((u64)f##__M << f##__S)
+
+/*
+ * err_common.c
+ */
+extern char *err_print_prefix;
+
+extern void mchk_dump_mem(void *, size_t, char **);
+extern void mchk_dump_logout_frame(struct el_common *);
+extern void el_print_timestamp(union el_timestamp *);
+extern void el_process_subpackets(struct el_subpacket *, int);
+extern struct el_subpacket *el_process_subpacket(struct el_subpacket *);
+extern void el_annotate_subpacket(struct el_subpacket *);
+extern void cdl_check_console_data_log(void);
+extern int cdl_register_subpacket_annotation(struct el_subpacket_annotation *);
+extern int cdl_register_subpacket_handler(struct el_subpacket_handler *);
+
+/*
+ * err_ev7.c
+ */
+extern struct ev7_lf_subpackets *
+ev7_collect_logout_frame_subpackets(struct el_subpacket *,
+				    struct ev7_lf_subpackets *);
+extern void ev7_register_error_handlers(void);
+extern void ev7_machine_check(unsigned long, unsigned long);
+
+/*
+ * err_ev6.c
+ */
+extern void ev6_register_error_handlers(void);
+extern int ev6_process_logout_frame(struct el_common *, int);
+extern void ev6_machine_check(unsigned long, unsigned long);
+
+/*
+ * err_marvel.c
+ */
+extern void marvel_machine_check(unsigned long, unsigned long);
+extern void marvel_register_error_handlers(void);
+
+/*
+ * err_titan.c
+ */
+extern int titan_process_logout_frame(struct el_common *, int);
+extern void titan_machine_check(unsigned long, unsigned long);
+extern void titan_register_error_handlers(void);
+extern int privateer_process_logout_frame(struct el_common *, int);
+extern void privateer_machine_check(unsigned long, unsigned long);
diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c
new file mode 100644
index 0000000000..c0c0ccefc4
--- /dev/null
+++ b/arch/alpha/kernel/err_marvel.c
@@ -0,0 +1,1161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/err_marvel.c
+ *
+ *	Copyright (C) 2001 Jeff Wiedemeier (Compaq Computer Corporation)
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+
+#include <asm/io.h>
+#include <asm/console.h>
+#include <asm/core_marvel.h>
+#include <asm/hwrpb.h>
+#include <asm/smp.h>
+#include <asm/err_common.h>
+#include <asm/err_ev7.h>
+
+#include "err_impl.h"
+#include "proto.h"
+
+static void
+marvel_print_680_frame(struct ev7_lf_subpackets *lf_subpackets)
+{
+#ifdef CONFIG_VERBOSE_MCHECK
+	struct ev7_pal_environmental_subpacket *env;
+	struct { int type; char *name; } ev_packets[] = {
+		{ EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE,
+		  "Ambient Temperature" },
+		{ EL_TYPE__PAL__ENV__AIRMOVER_FAN,
+		  "AirMover / Fan" },
+		{ EL_TYPE__PAL__ENV__VOLTAGE,
+		  "Voltage" },
+		{ EL_TYPE__PAL__ENV__INTRUSION,
+		  "Intrusion" },
+		{ EL_TYPE__PAL__ENV__POWER_SUPPLY,
+		  "Power Supply" },
+		{ EL_TYPE__PAL__ENV__LAN,
+		  "LAN" },
+		{ EL_TYPE__PAL__ENV__HOT_PLUG,
+		  "Hot Plug" },
+		{ 0, NULL }
+	};
+	int i;
+
+	for (i = 0; ev_packets[i].type != 0; i++) {
+		env = lf_subpackets->env[ev7_lf_env_index(ev_packets[i].type)];
+		if (!env)
+			continue;
+
+		printk("%s**%s event (cabinet %d, drawer %d)\n",
+		       err_print_prefix,
+		       ev_packets[i].name,
+		       env->cabinet,
+		       env->drawer);
+		printk("%s   Module Type: 0x%x - Unit ID 0x%x - "
+		       "Condition 0x%x\n",
+		       err_print_prefix,
+		       env->module_type,
+		       env->unit_id,
+		       env->condition);
+	}
+#endif /* CONFIG_VERBOSE_MCHECK */
+}
+
+static int
+marvel_process_680_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
+{
+	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
+	int i;
+
+	for (i = ev7_lf_env_index(EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE);
+	     i <= ev7_lf_env_index(EL_TYPE__PAL__ENV__HOT_PLUG);
+	     i++) {
+		if (lf_subpackets->env[i])
+			status = MCHK_DISPOSITION_REPORT;
+	}
+
+	if (print)
+		marvel_print_680_frame(lf_subpackets);
+
+	return status;
+}
+
+#ifdef CONFIG_VERBOSE_MCHECK
+
+static void
+marvel_print_err_cyc(u64 err_cyc)
+{
+	static char *packet_desc[] = {
+		"No Error",
+		"UNKNOWN",
+		"1 cycle (1 or 2 flit packet)",
+		"2 cycles (3 flit packet)",
+		"9 cycles (18 flit packet)",
+		"10 cycles (19 flit packet)",
+		"UNKNOWN",
+		"UNKNOWN",
+		"UNKNOWN"
+	};
+
+#define IO7__ERR_CYC__ODD_FLT	(1UL <<  0)
+#define IO7__ERR_CYC__EVN_FLT	(1UL <<  1)
+#define IO7__ERR_CYC__PACKET__S	(6)
+#define IO7__ERR_CYC__PACKET__M	(0x7)
+#define IO7__ERR_CYC__LOC	(1UL <<  5)
+#define IO7__ERR_CYC__CYCLE__S	(2)
+#define IO7__ERR_CYC__CYCLE__M	(0x7)
+
+	printk("%s        Packet In Error: %s\n"
+	       "%s        Error in %s, cycle %lld%s%s\n",
+	       err_print_prefix, 
+	       packet_desc[EXTRACT(err_cyc, IO7__ERR_CYC__PACKET)],
+	       err_print_prefix,
+	       (err_cyc & IO7__ERR_CYC__LOC) ? "DATA" : "HEADER",
+	       EXTRACT(err_cyc, IO7__ERR_CYC__CYCLE),
+	       (err_cyc & IO7__ERR_CYC__ODD_FLT) ? " [ODD Flit]": "",
+	       (err_cyc & IO7__ERR_CYC__EVN_FLT) ? " [Even Flit]": "");
+}
+
+static void
+marvel_print_po7_crrct_sym(u64 crrct_sym)
+{
+#define IO7__PO7_CRRCT_SYM__SYN__S	(0)
+#define IO7__PO7_CRRCT_SYM__SYN__M	(0x7f)
+#define IO7__PO7_CRRCT_SYM__ERR_CYC__S	(7)   /* ERR_CYC + ODD_FLT + EVN_FLT */
+#define IO7__PO7_CRRCT_SYM__ERR_CYC__M	(0x1ff)
+
+
+	printk("%s      Correctable Error Symptoms:\n"
+	       "%s        Syndrome: 0x%llx\n",
+	       err_print_prefix,
+	       err_print_prefix, EXTRACT(crrct_sym, IO7__PO7_CRRCT_SYM__SYN));
+	marvel_print_err_cyc(EXTRACT(crrct_sym, IO7__PO7_CRRCT_SYM__ERR_CYC));
+}
+
+static void
+marvel_print_po7_uncrr_sym(u64 uncrr_sym, u64 valid_mask)
+{
+	static char *clk_names[] = { "_h[0]", "_h[1]", "_n[0]", "_n[1]" };
+	static char *clk_decode[] = {
+		"No Error",
+		"One extra rising edge",
+		"Two extra rising edges",
+		"Lost one clock"
+	};
+	static char *port_names[] = { "Port 0", 	"Port 1", 
+				      "Port 2", 	"Port 3",
+				      "Unknown Port",	"Unknown Port",
+				      "Unknown Port",	"Port 7" };
+	int scratch, i;
+
+#define IO7__PO7_UNCRR_SYM__SYN__S	    (0)
+#define IO7__PO7_UNCRR_SYM__SYN__M	    (0x7f)
+#define IO7__PO7_UNCRR_SYM__ERR_CYC__S	    (7)      /* ERR_CYC + ODD_FLT... */
+#define IO7__PO7_UNCRR_SYM__ERR_CYC__M	    (0x1ff)  /* ... + EVN_FLT        */
+#define IO7__PO7_UNCRR_SYM__CLK__S	    (16)
+#define IO7__PO7_UNCRR_SYM__CLK__M	    (0xff)
+#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__REQ (1UL << 24)
+#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__RIO (1UL << 25)
+#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__WIO (1UL << 26)
+#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__BLK (1UL << 27)
+#define IO7__PO7_UNCRR_SYM__CDT_OVF_TO__NBK (1UL << 28)
+#define IO7__PO7_UNCRR_SYM__OVF__READIO	    (1UL << 29)
+#define IO7__PO7_UNCRR_SYM__OVF__WRITEIO    (1UL << 30)
+#define IO7__PO7_UNCRR_SYM__OVF__FWD        (1UL << 31)
+#define IO7__PO7_UNCRR_SYM__VICTIM_SP__S    (32)
+#define IO7__PO7_UNCRR_SYM__VICTIM_SP__M    (0xff)
+#define IO7__PO7_UNCRR_SYM__DETECT_SP__S    (40)
+#define IO7__PO7_UNCRR_SYM__DETECT_SP__M    (0xff)
+#define IO7__PO7_UNCRR_SYM__STRV_VTR__S     (48)
+#define IO7__PO7_UNCRR_SYM__STRV_VTR__M     (0x3ff)
+
+#define IO7__STRV_VTR__LSI__INTX__S	    (0)
+#define IO7__STRV_VTR__LSI__INTX__M	    (0x3)
+#define IO7__STRV_VTR__LSI__SLOT__S	    (2)
+#define IO7__STRV_VTR__LSI__SLOT__M	    (0x7)
+#define IO7__STRV_VTR__LSI__BUS__S	    (5)
+#define IO7__STRV_VTR__LSI__BUS__M	    (0x3)
+#define IO7__STRV_VTR__MSI__INTNUM__S	    (0)
+#define IO7__STRV_VTR__MSI__INTNUM__M	    (0x1ff)
+#define IO7__STRV_VTR__IS_MSI		    (1UL << 9)
+
+	printk("%s      Uncorrectable Error Symptoms:\n", err_print_prefix);
+	uncrr_sym &= valid_mask;
+
+	if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__SYN))
+		printk("%s        Syndrome: 0x%llx\n",
+		       err_print_prefix, 
+		       EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__SYN));
+
+	if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__ERR_CYC))
+		marvel_print_err_cyc(EXTRACT(uncrr_sym, 
+					     IO7__PO7_UNCRR_SYM__ERR_CYC));
+
+	scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__CLK);
+	for (i = 0; i < 4; i++, scratch >>= 2) {
+		if (scratch & 0x3)
+			printk("%s        Clock %s: %s\n",
+			       err_print_prefix,
+			       clk_names[i], clk_decode[scratch & 0x3]);
+	}
+
+	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__REQ) 
+		printk("%s       REQ Credit Timeout or Overflow\n",
+		       err_print_prefix);
+	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__RIO) 
+		printk("%s       RIO Credit Timeout or Overflow\n",
+		       err_print_prefix);
+	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__WIO) 
+		printk("%s       WIO Credit Timeout or Overflow\n",
+		       err_print_prefix);
+	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__BLK) 
+		printk("%s       BLK Credit Timeout or Overflow\n",
+		       err_print_prefix);
+	if (uncrr_sym & IO7__PO7_UNCRR_SYM__CDT_OVF_TO__NBK) 
+		printk("%s       NBK Credit Timeout or Overflow\n",
+		       err_print_prefix);
+
+	if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__READIO) 
+		printk("%s       Read I/O Buffer Overflow\n", 
+		       err_print_prefix);
+	if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__WRITEIO) 
+		printk("%s       Write I/O Buffer Overflow\n", 
+		       err_print_prefix);
+	if (uncrr_sym & IO7__PO7_UNCRR_SYM__OVF__FWD) 
+		printk("%s       FWD Buffer Overflow\n", 
+		       err_print_prefix);
+
+	if ((scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__VICTIM_SP))) {
+		int lost = scratch & (1UL << 4);
+		scratch &= ~lost;
+		for (i = 0; i < 8; i++, scratch >>= 1) {
+			if (!(scratch & 1))
+				continue;
+			printk("%s        Error Response sent to %s",
+			       err_print_prefix, port_names[i]);
+		}
+		if (lost)
+			printk("%s        Lost Error sent somewhere else\n",
+			       err_print_prefix);
+	}
+	
+	if ((scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__DETECT_SP))) {
+		for (i = 0; i < 8; i++, scratch >>= 1) {
+			if (!(scratch & 1))
+				continue;
+			printk("%s        Error Reported by %s",
+			       err_print_prefix, port_names[i]);
+		}
+	}
+
+	if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__STRV_VTR)) {
+		char starvation_message[80];
+
+		scratch = EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__STRV_VTR);
+		if (scratch & IO7__STRV_VTR__IS_MSI) 
+			sprintf(starvation_message, 
+				"MSI Interrupt 0x%x",
+				EXTRACT(scratch, IO7__STRV_VTR__MSI__INTNUM));
+		else
+			sprintf(starvation_message,
+				"LSI INT%c for Bus:Slot (%d:%d)\n",
+				'A' + EXTRACT(scratch, 
+					      IO7__STRV_VTR__LSI__INTX),
+				EXTRACT(scratch, IO7__STRV_VTR__LSI__BUS),
+				EXTRACT(scratch, IO7__STRV_VTR__LSI__SLOT));
+
+		printk("%s        Starvation Int Trigger By: %s\n",
+		       err_print_prefix, starvation_message);
+	}
+}
+
+static void
+marvel_print_po7_ugbge_sym(u64 ugbge_sym)
+{
+	char opcode_str[10];
+
+#define IO7__PO7_UGBGE_SYM__UPH_PKT_OFF__S	(6)
+#define IO7__PO7_UGBGE_SYM__UPH_PKT_OFF__M	(0xfffffffful)
+#define IO7__PO7_UGBGE_SYM__UPH_OPCODE__S	(40)
+#define IO7__PO7_UGBGE_SYM__UPH_OPCODE__M	(0xff)
+#define IO7__PO7_UGBGE_SYM__UPH_SRC_PORT__S	(48)
+#define IO7__PO7_UGBGE_SYM__UPH_SRC_PORT__M	(0xf)
+#define IO7__PO7_UGBGE_SYM__UPH_DEST_PID__S	(52)
+#define IO7__PO7_UGBGE_SYM__UPH_DEST_PID__M	(0x7ff)
+#define IO7__PO7_UGBGE_SYM__VALID		(1UL << 63)
+
+	if (!(ugbge_sym & IO7__PO7_UGBGE_SYM__VALID))
+		return;
+
+	switch(EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE)) {
+	case 0x51:
+		sprintf(opcode_str, "Wr32");
+		break;
+	case 0x50:
+		sprintf(opcode_str, "WrQW");
+		break;
+	case 0x54:
+		sprintf(opcode_str, "WrIPR");
+		break;
+	case 0xD8:
+		sprintf(opcode_str, "Victim");
+		break;
+	case 0xC5:
+		sprintf(opcode_str, "BlkIO");
+		break;
+	default:
+		sprintf(opcode_str, "0x%llx\n",
+			EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE));
+		break;
+	}
+
+	printk("%s      Up Hose Garbage Symptom:\n"
+	       "%s        Source Port: %lld - Dest PID: %lld - OpCode: %s\n",
+	       err_print_prefix,
+	       err_print_prefix, 
+	       EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_SRC_PORT),
+	       EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_DEST_PID),
+	       opcode_str);
+
+	if (0xC5 != EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE))
+		printk("%s        Packet Offset 0x%08llx\n",
+		       err_print_prefix,
+		       EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_PKT_OFF));
+}
+
+static void
+marvel_print_po7_err_sum(struct ev7_pal_io_subpacket *io)
+{
+	u64	uncrr_sym_valid = 0;
+
+#define IO7__PO7_ERRSUM__CR_SBE		(1UL << 32)
+#define IO7__PO7_ERRSUM__CR_SBE2	(1UL << 33)
+#define IO7__PO7_ERRSUM__CR_PIO_WBYTE	(1UL << 34)
+#define IO7__PO7_ERRSUM__CR_CSR_NXM	(1UL << 35)
+#define IO7__PO7_ERRSUM__CR_RPID_ACV	(1UL << 36)
+#define IO7__PO7_ERRSUM__CR_RSP_NXM	(1UL << 37)
+#define IO7__PO7_ERRSUM__CR_ERR_RESP	(1UL << 38)
+#define IO7__PO7_ERRSUM__CR_CLK_DERR	(1UL << 39)
+#define IO7__PO7_ERRSUM__CR_DAT_DBE	(1UL << 40)
+#define IO7__PO7_ERRSUM__CR_DAT_GRBG	(1UL << 41)
+#define IO7__PO7_ERRSUM__MAF_TO		(1UL << 42)
+#define IO7__PO7_ERRSUM__UGBGE		(1UL << 43)
+#define IO7__PO7_ERRSUM__UN_MAF_LOST	(1UL << 44)
+#define IO7__PO7_ERRSUM__UN_PKT_OVF	(1UL << 45)
+#define IO7__PO7_ERRSUM__UN_CDT_OVF	(1UL << 46)
+#define IO7__PO7_ERRSUM__UN_DEALLOC	(1UL << 47)
+#define IO7__PO7_ERRSUM__BH_CDT_TO	(1UL << 51)
+#define IO7__PO7_ERRSUM__BH_CLK_HDR	(1UL << 52)
+#define IO7__PO7_ERRSUM__BH_DBE_HDR	(1UL << 53)
+#define IO7__PO7_ERRSUM__BH_GBG_HDR	(1UL << 54)
+#define IO7__PO7_ERRSUM__BH_BAD_CMD	(1UL << 55)
+#define IO7__PO7_ERRSUM__HLT_INT	(1UL << 56)
+#define IO7__PO7_ERRSUM__HP_INT		(1UL << 57)
+#define IO7__PO7_ERRSUM__CRD_INT	(1UL << 58)
+#define IO7__PO7_ERRSUM__STV_INT	(1UL << 59)
+#define IO7__PO7_ERRSUM__HRD_INT	(1UL << 60)
+#define IO7__PO7_ERRSUM__BH_SUM		(1UL << 61)
+#define IO7__PO7_ERRSUM__ERR_LST	(1UL << 62)
+#define IO7__PO7_ERRSUM__ERR_VALID	(1UL << 63)
+
+#define IO7__PO7_ERRSUM__ERR_MASK	(IO7__PO7_ERRSUM__ERR_VALID |	\
+					 IO7__PO7_ERRSUM__CR_SBE)
+
+	/*
+	 * Single bit errors aren't covered by ERR_VALID.
+	 */
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_SBE) {
+		printk("%s    %sSingle Bit Error(s) detected/corrected\n",
+		       err_print_prefix,
+		       (io->po7_error_sum & IO7__PO7_ERRSUM__CR_SBE2) 
+		       ? "Multiple " : "");
+		marvel_print_po7_crrct_sym(io->po7_crrct_sym);
+	}
+
+	/*
+	 * Neither are the interrupt status bits
+	 */
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__HLT_INT)
+		printk("%s    Halt Interrupt posted", err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__HP_INT) {
+		printk("%s    Hot Plug Event Interrupt posted", 
+		       err_print_prefix);
+		uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__DETECT_SP);
+	}
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CRD_INT)
+		printk("%s    Correctable Error Interrupt posted", 
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__STV_INT) {
+		printk("%s    Starvation Interrupt posted", err_print_prefix);
+		uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__STRV_VTR);
+	}
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__HRD_INT) {
+		printk("%s    Hard Error Interrupt posted", err_print_prefix);
+		uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__DETECT_SP);
+	}
+
+	/*
+	 * Everything else is valid only with ERR_VALID, so skip to the end
+	 * (uncrr_sym check) unless ERR_VALID is set.
+	 */
+	if (!(io->po7_error_sum & IO7__PO7_ERRSUM__ERR_VALID)) 
+		goto check_uncrr_sym;
+
+	/*
+	 * Since ERR_VALID is set, VICTIM_SP in uncrr_sym is valid.
+	 * For bits [29:0] to also be valid, the following bits must
+	 * not be set:
+	 *	CR_PIO_WBYTE	CR_CSR_NXM	CR_RSP_NXM
+	 *	CR_ERR_RESP	MAF_TO
+	 */
+	uncrr_sym_valid |= GEN_MASK(IO7__PO7_UNCRR_SYM__VICTIM_SP);
+	if (!(io->po7_error_sum & (IO7__PO7_ERRSUM__CR_PIO_WBYTE |
+				   IO7__PO7_ERRSUM__CR_CSR_NXM |
+				   IO7__PO7_ERRSUM__CR_RSP_NXM |
+				   IO7__PO7_ERRSUM__CR_ERR_RESP |
+				   IO7__PO7_ERRSUM__MAF_TO)))
+		uncrr_sym_valid |= 0x3ffffffful;
+
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_PIO_WBYTE)
+		printk("%s    Write byte into IO7 CSR\n", err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_CSR_NXM)
+		printk("%s    PIO to non-existent CSR\n", err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_RPID_ACV)
+		printk("%s    Bus Requester PID (Access Violation)\n",
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_RSP_NXM)
+		printk("%s    Received NXM response from EV7\n",
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_ERR_RESP)
+		printk("%s    Received ERROR RESPONSE\n", err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_CLK_DERR)
+		printk("%s    Clock error on data flit\n", err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_DAT_DBE)
+		printk("%s    Double Bit Error Data Error Detected\n",
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__CR_DAT_GRBG)
+		printk("%s    Garbage Encoding Detected on the data\n",
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__UGBGE) {
+		printk("%s    Garbage Encoding sent up hose\n",
+		       err_print_prefix);
+		marvel_print_po7_ugbge_sym(io->po7_ugbge_sym);
+	}
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_MAF_LOST)
+		printk("%s    Orphan response (unexpected response)\n",
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_PKT_OVF)
+		printk("%s    Down hose packet overflow\n", err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_CDT_OVF)
+		printk("%s    Down hose credit overflow\n", err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__UN_DEALLOC)
+		printk("%s    Unexpected or bad dealloc field\n",
+		       err_print_prefix);
+
+	/*
+	 * The black hole events.
+	 */
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__MAF_TO)
+		printk("%s    BLACK HOLE: Timeout for all responses\n",
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_CDT_TO)
+		printk("%s    BLACK HOLE: Credit Timeout\n", err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_CLK_HDR)
+		printk("%s    BLACK HOLE: Clock check on header\n", 
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_DBE_HDR)
+		printk("%s    BLACK HOLE: Uncorrectable Error on header\n",
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_GBG_HDR)
+		printk("%s    BLACK HOLE: Garbage on header\n", 
+		       err_print_prefix);
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__BH_BAD_CMD)
+		printk("%s    BLACK HOLE: Bad EV7 command\n", 
+		       err_print_prefix);
+
+	if (io->po7_error_sum & IO7__PO7_ERRSUM__ERR_LST) 
+		printk("%s    Lost Error\n", err_print_prefix);
+
+	printk("%s    Failing Packet:\n"
+	       "%s      Cycle 1: %016llx\n"
+	       "%s      Cycle 2: %016llx\n",
+	       err_print_prefix,
+	       err_print_prefix, io->po7_err_pkt0,
+	       err_print_prefix, io->po7_err_pkt1);
+	/*
+	 * If there are any valid bits in UNCRR sym for this err, 
+	 * print UNCRR_SYM as well.
+	 */
+check_uncrr_sym:
+	if (uncrr_sym_valid)
+		marvel_print_po7_uncrr_sym(io->po7_uncrr_sym, uncrr_sym_valid);
+}
+
+static void
+marvel_print_pox_tlb_err(u64 tlb_err)
+{
+	static char *tlb_errors[] = {
+		"No Error",
+		"North Port Signaled Error fetching TLB entry",
+		"PTE invalid or UCC or GBG error on this entry",
+		"Address did not hit any DMA window"
+	};
+
+#define IO7__POX_TLBERR__ERR_VALID		(1UL << 63)
+#define IO7__POX_TLBERR__ERRCODE__S		(0)
+#define IO7__POX_TLBERR__ERRCODE__M		(0x3)
+#define IO7__POX_TLBERR__ERR_TLB_PTR__S		(3)
+#define IO7__POX_TLBERR__ERR_TLB_PTR__M		(0x7)
+#define IO7__POX_TLBERR__FADDR__S		(6)
+#define IO7__POX_TLBERR__FADDR__M		(0x3fffffffffful)
+
+	if (!(tlb_err & IO7__POX_TLBERR__ERR_VALID))
+		return;
+
+	printk("%s      TLB Error on index 0x%llx:\n"
+	       "%s        - %s\n"
+	       "%s        - Addr: 0x%016llx\n",
+	       err_print_prefix,
+	       EXTRACT(tlb_err, IO7__POX_TLBERR__ERR_TLB_PTR),
+	       err_print_prefix,
+	       tlb_errors[EXTRACT(tlb_err, IO7__POX_TLBERR__ERRCODE)],
+	       err_print_prefix,
+	       EXTRACT(tlb_err, IO7__POX_TLBERR__FADDR) << 6);
+}
+
+static  void
+marvel_print_pox_spl_cmplt(u64 spl_cmplt)
+{
+	char message[80];
+
+#define IO7__POX_SPLCMPLT__MESSAGE__S		(0)
+#define IO7__POX_SPLCMPLT__MESSAGE__M		(0x0fffffffful)
+#define IO7__POX_SPLCMPLT__SOURCE_BUS__S	(40)
+#define IO7__POX_SPLCMPLT__SOURCE_BUS__M	(0xfful)
+#define IO7__POX_SPLCMPLT__SOURCE_DEV__S	(35)
+#define IO7__POX_SPLCMPLT__SOURCE_DEV__M	(0x1ful)
+#define IO7__POX_SPLCMPLT__SOURCE_FUNC__S	(32)
+#define IO7__POX_SPLCMPLT__SOURCE_FUNC__M	(0x07ul)
+
+#define IO7__POX_SPLCMPLT__MSG_CLASS__S		(28)
+#define IO7__POX_SPLCMPLT__MSG_CLASS__M		(0xf)
+#define IO7__POX_SPLCMPLT__MSG_INDEX__S		(20)
+#define IO7__POX_SPLCMPLT__MSG_INDEX__M		(0xff)
+#define IO7__POX_SPLCMPLT__MSG_CLASSINDEX__S	(20)
+#define IO7__POX_SPLCMPLT__MSG_CLASSINDEX__M    (0xfff)
+#define IO7__POX_SPLCMPLT__REM_LOWER_ADDR__S	(12)
+#define IO7__POX_SPLCMPLT__REM_LOWER_ADDR__M	(0x7f)
+#define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__S	(0)
+#define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__M	(0xfff)
+
+	printk("%s      Split Completion Error:\n"	
+	       "%s         Source (Bus:Dev:Func): %lld:%lld:%lld\n",
+	       err_print_prefix,
+	       err_print_prefix,
+	       EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_BUS),
+	       EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_DEV),
+	       EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_FUNC));
+
+	switch(EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__MSG_CLASSINDEX)) {
+	case 0x000:
+		sprintf(message, "Normal completion");
+		break;
+	case 0x100:
+		sprintf(message, "Bridge - Master Abort");
+		break;
+	case 0x101:
+		sprintf(message, "Bridge - Target Abort");
+		break;
+	case 0x102:
+		sprintf(message, "Bridge - Uncorrectable Write Data Error");
+		break;
+	case 0x200:
+		sprintf(message, "Byte Count Out of Range");
+		break;
+	case 0x201:
+		sprintf(message, "Uncorrectable Split Write Data Error");
+		break;
+	default:
+		sprintf(message, "%08llx\n",
+			EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__MESSAGE));
+		break;
+	}
+	printk("%s	   Message: %s\n", err_print_prefix, message);
+}
+
+static void
+marvel_print_pox_trans_sum(u64 trans_sum)
+{
+	static const char * const pcix_cmd[] = {
+		"Interrupt Acknowledge",
+		"Special Cycle",
+		"I/O Read",
+		"I/O Write",
+		"Reserved",
+		"Reserved / Device ID Message",
+		"Memory Read",
+		"Memory Write",
+		"Reserved / Alias to Memory Read Block",
+		"Reserved / Alias to Memory Write Block",
+		"Configuration Read",
+		"Configuration Write",
+		"Memory Read Multiple / Split Completion",
+		"Dual Address Cycle",
+		"Memory Read Line / Memory Read Block",
+		"Memory Write and Invalidate / Memory Write Block"
+	};
+
+#define IO7__POX_TRANSUM__PCI_ADDR__S		(0)
+#define IO7__POX_TRANSUM__PCI_ADDR__M		(0x3fffffffffffful)
+#define IO7__POX_TRANSUM__DAC			(1UL << 50)
+#define IO7__POX_TRANSUM__PCIX_MASTER_SLOT__S	(52)
+#define IO7__POX_TRANSUM__PCIX_MASTER_SLOT__M	(0xf)
+#define IO7__POX_TRANSUM__PCIX_CMD__S		(56)
+#define IO7__POX_TRANSUM__PCIX_CMD__M		(0xf)
+#define IO7__POX_TRANSUM__ERR_VALID		(1UL << 63)
+
+	if (!(trans_sum & IO7__POX_TRANSUM__ERR_VALID))
+		return;
+
+	printk("%s      Transaction Summary:\n"
+	       "%s        Command: 0x%llx - %s\n"
+	       "%s        Address: 0x%016llx%s\n"
+	       "%s        PCI-X Master Slot: 0x%llx\n",
+	       err_print_prefix, 
+	       err_print_prefix, 
+	       EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_CMD),
+	       pcix_cmd[EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_CMD)],
+	       err_print_prefix,
+	       EXTRACT(trans_sum, IO7__POX_TRANSUM__PCI_ADDR),
+	       (trans_sum & IO7__POX_TRANSUM__DAC) ? " (DAC)" : "",
+	       err_print_prefix,
+	       EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_MASTER_SLOT));
+}
+
+static void
+marvel_print_pox_err(u64 err_sum, struct ev7_pal_io_one_port *port)
+{
+#define IO7__POX_ERRSUM__AGP_REQQ_OVFL    (1UL <<  4)
+#define IO7__POX_ERRSUM__AGP_SYNC_ERR     (1UL <<  5)
+#define IO7__POX_ERRSUM__MRETRY_TO        (1UL <<  6)
+#define IO7__POX_ERRSUM__PCIX_UX_SPL      (1UL <<  7)
+#define IO7__POX_ERRSUM__PCIX_SPLIT_TO    (1UL <<  8)
+#define IO7__POX_ERRSUM__PCIX_DISCARD_SPL (1UL <<  9)
+#define IO7__POX_ERRSUM__DMA_RD_TO        (1UL << 10)
+#define IO7__POX_ERRSUM__CSR_NXM_RD       (1UL << 11)
+#define IO7__POX_ERRSUM__CSR_NXM_WR       (1UL << 12)
+#define IO7__POX_ERRSUM__DMA_TO           (1UL << 13)
+#define IO7__POX_ERRSUM__ALL_MABORTS      (1UL << 14)
+#define IO7__POX_ERRSUM__MABORT		  (1UL << 15)
+#define IO7__POX_ERRSUM__MABORT_MASK	  (IO7__POX_ERRSUM__ALL_MABORTS|\
+					   IO7__POX_ERRSUM__MABORT)
+#define IO7__POX_ERRSUM__PT_TABORT        (1UL << 16)
+#define IO7__POX_ERRSUM__PM_TABORT        (1UL << 17)
+#define IO7__POX_ERRSUM__TABORT_MASK      (IO7__POX_ERRSUM__PT_TABORT | \
+                                           IO7__POX_ERRSUM__PM_TABORT)
+#define IO7__POX_ERRSUM__SERR             (1UL << 18)
+#define IO7__POX_ERRSUM__ADDRERR_STB      (1UL << 19)
+#define IO7__POX_ERRSUM__DETECTED_SERR    (1UL << 20)
+#define IO7__POX_ERRSUM__PERR             (1UL << 21)
+#define IO7__POX_ERRSUM__DATAERR_STB_NIOW (1UL << 22)
+#define IO7__POX_ERRSUM__DETECTED_PERR    (1UL << 23)
+#define IO7__POX_ERRSUM__PM_PERR          (1UL << 24)
+#define IO7__POX_ERRSUM__PT_SCERROR       (1UL << 26)
+#define IO7__POX_ERRSUM__HUNG_BUS         (1UL << 28)
+#define IO7__POX_ERRSUM__UPE_ERROR__S     (51)
+#define IO7__POX_ERRSUM__UPE_ERROR__M     (0xffUL)
+#define IO7__POX_ERRSUM__UPE_ERROR        GEN_MASK(IO7__POX_ERRSUM__UPE_ERROR)
+#define IO7__POX_ERRSUM__TLB_ERR          (1UL << 59)
+#define IO7__POX_ERRSUM__ERR_VALID        (1UL << 63)
+
+#define IO7__POX_ERRSUM__TRANS_SUM__MASK  (IO7__POX_ERRSUM__MRETRY_TO |       \
+					   IO7__POX_ERRSUM__PCIX_UX_SPL |     \
+					   IO7__POX_ERRSUM__PCIX_SPLIT_TO |   \
+					   IO7__POX_ERRSUM__DMA_TO |          \
+					   IO7__POX_ERRSUM__MABORT_MASK |     \
+					   IO7__POX_ERRSUM__TABORT_MASK |     \
+					   IO7__POX_ERRSUM__SERR |            \
+					   IO7__POX_ERRSUM__ADDRERR_STB |     \
+					   IO7__POX_ERRSUM__PERR |            \
+					   IO7__POX_ERRSUM__DATAERR_STB_NIOW |\
+					   IO7__POX_ERRSUM__DETECTED_PERR |   \
+					   IO7__POX_ERRSUM__PM_PERR |         \
+					   IO7__POX_ERRSUM__PT_SCERROR |      \
+					   IO7__POX_ERRSUM__UPE_ERROR)
+
+	if (!(err_sum & IO7__POX_ERRSUM__ERR_VALID))
+		return;
+
+	/*
+	 * First the transaction summary errors
+	 */
+	if (err_sum & IO7__POX_ERRSUM__MRETRY_TO)
+		printk("%s    IO7 Master Retry Timeout expired\n",
+		       err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__PCIX_UX_SPL)
+		printk("%s    Unexpected Split Completion\n",
+		       err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__PCIX_SPLIT_TO)
+		printk("%s    IO7 Split Completion Timeout expired\n",
+		       err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__DMA_TO)
+		printk("%s    Hung bus during DMA transaction\n",
+		       err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__MABORT_MASK)
+		printk("%s    Master Abort\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__PT_TABORT)
+		printk("%s    IO7 Asserted Target Abort\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__PM_TABORT)
+		printk("%s    IO7 Received Target Abort\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__ADDRERR_STB) {
+		printk("%s    Address or PCI-X Attribute Parity Error\n", 
+		       err_print_prefix);
+		if (err_sum & IO7__POX_ERRSUM__SERR)
+			printk("%s     IO7 Asserted SERR\n", err_print_prefix);
+	}
+	if (err_sum & IO7__POX_ERRSUM__PERR) {
+		if (err_sum & IO7__POX_ERRSUM__DATAERR_STB_NIOW)
+			printk("%s    IO7 Detected Data Parity Error\n",
+			       err_print_prefix);
+		else
+			printk("%s    Split Completion Response with "
+			       "Parity Error\n", err_print_prefix);
+	}
+	if (err_sum & IO7__POX_ERRSUM__DETECTED_PERR)
+		printk("%s    PERR detected\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__PM_PERR)
+		printk("%s    PERR while IO7 is master\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__PT_SCERROR) {
+		printk("%s    IO7 Received Split Completion Error message\n",
+		       err_print_prefix);
+		marvel_print_pox_spl_cmplt(port->pox_spl_cmplt);
+	}
+	if (err_sum & IO7__POX_ERRSUM__UPE_ERROR) {
+		unsigned int upe_error = EXTRACT(err_sum,
+						 IO7__POX_ERRSUM__UPE_ERROR);
+		int i;
+		static char *upe_errors[] = {
+			"Parity Error on MSI write data",
+			"MSI read (MSI window is write only",
+			"TLB - Invalid WR transaction",
+			"TLB - Invalid RD transaction",
+			"DMA - WR error (see north port)",
+			"DMA - RD error (see north port)",
+			"PPR - WR error (see north port)",
+			"PPR - RD error (see north port)"
+		};
+
+		printk("%s    UPE Error:\n", err_print_prefix);
+		for (i = 0; i < 8; i++) {
+			if (upe_error & (1 << i))
+				printk("%s      %s\n", err_print_prefix,
+				       upe_errors[i]);
+		}
+	}
+
+	/*
+	 * POx_TRANS_SUM, if appropriate.
+	 */
+	if (err_sum & IO7__POX_ERRSUM__TRANS_SUM__MASK) 
+		marvel_print_pox_trans_sum(port->pox_trans_sum);
+
+	/*
+	 * Then TLB_ERR.
+	 */
+	if (err_sum & IO7__POX_ERRSUM__TLB_ERR) {
+		printk("%s    TLB ERROR\n", err_print_prefix);
+		marvel_print_pox_tlb_err(port->pox_tlb_err);
+	}
+
+	/*
+	 * And the single bit status errors.
+	 */
+	if (err_sum & IO7__POX_ERRSUM__AGP_REQQ_OVFL)
+		printk("%s    AGP Request Queue Overflow\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__AGP_SYNC_ERR)
+		printk("%s    AGP Sync Error\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__PCIX_DISCARD_SPL)
+		printk("%s    Discarded split completion\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__DMA_RD_TO)
+		printk("%s    DMA Read Timeout\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__CSR_NXM_RD)
+		printk("%s    CSR NXM READ\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__CSR_NXM_WR)
+		printk("%s    CSR NXM WRITE\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__DETECTED_SERR)
+		printk("%s    SERR detected\n", err_print_prefix);
+	if (err_sum & IO7__POX_ERRSUM__HUNG_BUS)
+		printk("%s    HUNG BUS detected\n", err_print_prefix);
+}
+
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+static struct ev7_pal_io_subpacket *
+marvel_find_io7_with_error(struct ev7_lf_subpackets *lf_subpackets)
+{
+	struct ev7_pal_io_subpacket *io = lf_subpackets->io;
+	struct io7 *io7;
+	int i;
+
+	/*
+	 * Caller must provide the packet to fill
+	 */
+	if (!io)
+		return NULL;
+
+	/*
+	 * Fill the subpacket with the console's standard fill pattern
+	 */
+	memset(io, 0x55, sizeof(*io));
+
+	for (io7 = NULL; NULL != (io7 = marvel_next_io7(io7)); ) {
+		unsigned long err_sum = 0;
+
+		err_sum |= io7->csrs->PO7_ERROR_SUM.csr;
+		for (i = 0; i < IO7_NUM_PORTS; i++) {
+			if (!io7->ports[i].enabled)
+				continue;
+			err_sum |= io7->ports[i].csrs->POx_ERR_SUM.csr;
+		}
+
+		/*
+		 * Is there at least one error? 
+		 */
+		if (err_sum & (1UL << 63))
+			break;
+	}
+
+	/*
+	 * Did we find an IO7 with an error?
+	 */
+	if (!io7)
+		return NULL;
+
+	/*
+	 * We have an IO7 with an error. 
+	 *
+	 * Fill in the IO subpacket.
+	 */
+	io->io_asic_rev   = io7->csrs->IO_ASIC_REV.csr;
+	io->io_sys_rev    = io7->csrs->IO_SYS_REV.csr;
+	io->io7_uph       = io7->csrs->IO7_UPH.csr;
+	io->hpi_ctl       = io7->csrs->HPI_CTL.csr;
+	io->crd_ctl       = io7->csrs->CRD_CTL.csr;
+	io->hei_ctl       = io7->csrs->HEI_CTL.csr;
+	io->po7_error_sum = io7->csrs->PO7_ERROR_SUM.csr;
+	io->po7_uncrr_sym = io7->csrs->PO7_UNCRR_SYM.csr;
+	io->po7_crrct_sym = io7->csrs->PO7_CRRCT_SYM.csr;
+	io->po7_ugbge_sym = io7->csrs->PO7_UGBGE_SYM.csr;
+	io->po7_err_pkt0  = io7->csrs->PO7_ERR_PKT[0].csr;
+	io->po7_err_pkt1  = io7->csrs->PO7_ERR_PKT[1].csr;
+	
+	for (i = 0; i < IO7_NUM_PORTS; i++) {
+		io7_ioport_csrs *csrs = io7->ports[i].csrs;
+
+		if (!io7->ports[i].enabled)
+			continue;
+
+		io->ports[i].pox_err_sum   = csrs->POx_ERR_SUM.csr;
+		io->ports[i].pox_tlb_err   = csrs->POx_TLB_ERR.csr;
+		io->ports[i].pox_spl_cmplt = csrs->POx_SPL_COMPLT.csr;
+		io->ports[i].pox_trans_sum = csrs->POx_TRANS_SUM.csr;
+		io->ports[i].pox_first_err = csrs->POx_FIRST_ERR.csr;
+		io->ports[i].pox_mult_err  = csrs->POx_MULT_ERR.csr;
+		io->ports[i].pox_dm_source = csrs->POx_DM_SOURCE.csr;
+		io->ports[i].pox_dm_dest   = csrs->POx_DM_DEST.csr;
+		io->ports[i].pox_dm_size   = csrs->POx_DM_SIZE.csr;
+		io->ports[i].pox_dm_ctrl   = csrs->POx_DM_CTRL.csr;
+
+		/*
+		 * Ack this port's errors, if any. POx_ERR_SUM must be last.
+		 *
+		 * Most of the error registers get cleared and unlocked when
+		 * the associated bits in POx_ERR_SUM are cleared (by writing
+		 * 1). POx_TLB_ERR is an exception and must be explicitly 
+		 * cleared.
+		 */
+		csrs->POx_TLB_ERR.csr = io->ports[i].pox_tlb_err;
+		csrs->POx_ERR_SUM.csr =	io->ports[i].pox_err_sum;
+		mb();
+		csrs->POx_ERR_SUM.csr;		
+	}
+
+	/*
+	 * Ack any port 7 error(s).
+	 */
+	io7->csrs->PO7_ERROR_SUM.csr = io->po7_error_sum;
+	mb();
+	io7->csrs->PO7_ERROR_SUM.csr;
+	
+	/*
+	 * Correct the io7_pid.
+	 */
+	lf_subpackets->io_pid = io7->pe;
+
+	return io;
+}
+
+static int
+marvel_process_io_error(struct ev7_lf_subpackets *lf_subpackets, int print)
+{
+	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	struct ev7_pal_io_subpacket *io = lf_subpackets->io;
+	int i;
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+#define MARVEL_IO_ERR_VALID(x)  ((x) & (1UL << 63))
+
+	if (!lf_subpackets->logout || !lf_subpackets->io)
+		return status;
+
+	/*
+	 * The PALcode only builds an IO subpacket if there is a 
+	 * locally connected IO7. In the cases of
+	 *	1) a uniprocessor kernel
+	 *	2) an mp kernel before the local secondary has called in
+	 * error interrupts are all directed to the primary processor.
+	 * In that case, we may not have an IO subpacket at all and, event
+	 * if we do, it may not be the right now. 
+	 *
+	 * If the RBOX indicates an I/O error interrupt, make sure we have
+	 * the correct IO7 information. If we don't have an IO subpacket
+	 * or it's the wrong one, try to find the right one.
+	 *
+	 * RBOX I/O error interrupts are indicated by RBOX_INT<29> and
+	 * RBOX_INT<10>.
+	 */
+	if ((lf_subpackets->io->po7_error_sum & (1UL << 32)) ||
+	    ((lf_subpackets->io->po7_error_sum        |
+	      lf_subpackets->io->ports[0].pox_err_sum |
+	      lf_subpackets->io->ports[1].pox_err_sum |
+	      lf_subpackets->io->ports[2].pox_err_sum |
+	      lf_subpackets->io->ports[3].pox_err_sum) & (1UL << 63))) {
+		/*
+		 * Either we have no IO subpacket or no error is
+		 * indicated in the one we do have. Try find the
+		 * one with the error.
+		 */
+		if (!marvel_find_io7_with_error(lf_subpackets))
+			return status;
+	}
+
+	/*
+	 * We have an IO7 indicating an error - we're going to report it
+	 */
+	status = MCHK_DISPOSITION_REPORT;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+
+	if (!print)
+		return status;
+
+	printk("%s*Error occurred on IO7 at PID %u\n", 
+	       err_print_prefix, lf_subpackets->io_pid);
+
+	/*
+	 * Check port 7 first
+	 */
+	if (lf_subpackets->io->po7_error_sum & IO7__PO7_ERRSUM__ERR_MASK) {
+		marvel_print_po7_err_sum(io);
+
+#if 0
+		printk("%s  PORT 7 ERROR:\n"
+		       "%s    PO7_ERROR_SUM: %016llx\n"
+		       "%s    PO7_UNCRR_SYM: %016llx\n"
+		       "%s    PO7_CRRCT_SYM: %016llx\n"
+		       "%s    PO7_UGBGE_SYM: %016llx\n"
+		       "%s    PO7_ERR_PKT0:  %016llx\n"
+		       "%s    PO7_ERR_PKT1:  %016llx\n",
+		       err_print_prefix,
+		       err_print_prefix, io->po7_error_sum,
+		       err_print_prefix, io->po7_uncrr_sym,
+		       err_print_prefix, io->po7_crrct_sym,
+		       err_print_prefix, io->po7_ugbge_sym,
+		       err_print_prefix, io->po7_err_pkt0,
+		       err_print_prefix, io->po7_err_pkt1);
+#endif
+	}
+
+	/*
+	 * Then loop through the ports
+	 */
+	for (i = 0; i < IO7_NUM_PORTS; i++) {
+		if (!MARVEL_IO_ERR_VALID(io->ports[i].pox_err_sum))
+			continue;
+
+		printk("%s  PID %u PORT %d POx_ERR_SUM: %016llx\n",
+		       err_print_prefix, 
+		       lf_subpackets->io_pid, i, io->ports[i].pox_err_sum);
+		marvel_print_pox_err(io->ports[i].pox_err_sum, &io->ports[i]);
+
+		printk("%s  [ POx_FIRST_ERR: %016llx ]\n",
+		       err_print_prefix, io->ports[i].pox_first_err);
+		marvel_print_pox_err(io->ports[i].pox_first_err, 
+				     &io->ports[i]);
+
+	}
+
+
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+	return status;
+}
+
+static int
+marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
+{
+	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+	/*
+	 * I/O error? 
+	 */
+#define EV7__RBOX_INT__IO_ERROR__MASK 0x20000400ul
+	if (lf_subpackets->logout &&
+	    (lf_subpackets->logout->rbox_int & 0x20000400ul))
+		status = marvel_process_io_error(lf_subpackets, print);
+
+	/*
+	 * Probing behind PCI-X bridges can cause machine checks on
+	 * Marvel when the probe is handled by the bridge as a split
+	 * completion transaction. The symptom is an ERROR_RESPONSE 
+	 * to a CONFIG address. Since these errors will happen in
+	 * normal operation, dismiss them.
+	 *
+	 * Dismiss if:
+	 *	C_STAT		= 0x14 		(Error Response)
+	 *	C_STS<3>	= 0    		(C_ADDR valid)
+	 *	C_ADDR<42>	= 1    		(I/O)
+	 *	C_ADDR<31:22>	= 111110xxb	(PCI Config space)
+	 */
+	if (lf_subpackets->ev7 &&
+	    (lf_subpackets->ev7->c_stat == 0x14) &&
+	    !(lf_subpackets->ev7->c_sts & 0x8) &&
+	    ((lf_subpackets->ev7->c_addr & 0x400ff000000ul) 
+	     == 0x400fe000000ul))
+		status = MCHK_DISPOSITION_DISMISS;
+
+	return status;
+}
+
+void
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
+	int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;
+	struct ev7_lf_subpackets subpacket_collection = { NULL, };
+	struct ev7_pal_io_subpacket scratch_io_packet = { 0, };
+	struct ev7_lf_subpackets *lf_subpackets = NULL;
+	int disposition = MCHK_DISPOSITION_UNKNOWN_ERROR;
+	char *saved_err_prefix = err_print_prefix;
+	char *error_type = NULL;
+
+	/*
+	 * Sync the processor
+	 */
+	mb();
+	draina();
+
+	switch(vector) {
+	case SCB_Q_SYSEVENT:
+		process_frame = marvel_process_680_frame;
+		error_type = "System Event";
+		break;
+
+	case SCB_Q_SYSMCHK:
+		process_frame = marvel_process_logout_frame;
+		error_type = "System Uncorrectable Error";
+		break;
+
+	case SCB_Q_SYSERR:
+		process_frame = marvel_process_logout_frame;
+		error_type = "System Correctable Error";
+		break;
+
+	default:
+		/* Don't know it - pass it up.  */
+		ev7_machine_check(vector, la_ptr);
+		return;
+	}	
+
+	/*
+	 * A system event or error has occurred, handle it here.
+	 *
+	 * Any errors in the logout frame have already been cleared by the
+	 * PALcode, so just parse it.
+	 */
+	err_print_prefix = KERN_CRIT;
+
+	/* 
+	 * Parse the logout frame without printing first. If the only error(s)
+	 * found are classified as "dismissable", then just dismiss them and
+	 * don't print any message
+	 */
+	lf_subpackets = 
+		ev7_collect_logout_frame_subpackets(el_ptr,
+						    &subpacket_collection);
+	if (process_frame && lf_subpackets && lf_subpackets->logout) {
+		/*
+		 * We might not have the correct (or any) I/O subpacket.
+		 * [ See marvel_process_io_error() for explanation. ]
+		 * If we don't have one, point the io subpacket in
+		 * lf_subpackets at scratch_io_packet so that 
+		 * marvel_find_io7_with_error() will have someplace to
+		 * store the info.
+		 */
+		if (!lf_subpackets->io)
+			lf_subpackets->io = &scratch_io_packet;
+
+		/*
+		 * Default io_pid to the processor reporting the error
+		 * [this will get changed in marvel_find_io7_with_error()
+		 * if a different one is needed]
+		 */
+		lf_subpackets->io_pid = lf_subpackets->logout->whami;
+
+		/*
+		 * Evaluate the frames.
+		 */
+		disposition = process_frame(lf_subpackets, 0);
+	}
+	switch(disposition) {
+	case MCHK_DISPOSITION_DISMISS:
+		/* Nothing to do. */
+		break;
+
+	case MCHK_DISPOSITION_REPORT:
+		/* Recognized error, report it. */
+		printk("%s*%s (Vector 0x%x) reported on CPU %d\n",
+		       err_print_prefix, error_type,
+		       (unsigned int)vector, (int)smp_processor_id());
+		el_print_timestamp(&lf_subpackets->logout->timestamp);
+		process_frame(lf_subpackets, 1);
+		break;
+
+	default:
+		/* Unknown - dump the annotated subpackets. */
+		printk("%s*%s (Vector 0x%x) reported on CPU %d\n",
+		       err_print_prefix, error_type,
+		       (unsigned int)vector, (int)smp_processor_id());
+		el_process_subpacket(el_ptr);
+		break;
+
+	}
+
+	err_print_prefix = saved_err_prefix;
+
+        /* Release the logout frame.  */
+	wrmces(0x7);
+	mb();
+}
+
+void __init
+marvel_register_error_handlers(void)
+{
+	ev7_register_error_handlers();
+}
diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c
new file mode 100644
index 0000000000..0ffb2feea4
--- /dev/null
+++ b/arch/alpha/kernel/err_titan.c
@@ -0,0 +1,761 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/err_titan.c
+ *
+ *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
+ *
+ *	Error handling code supporting TITAN systems
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+
+#include <asm/io.h>
+#include <asm/core_titan.h>
+#include <asm/hwrpb.h>
+#include <asm/smp.h>
+#include <asm/err_common.h>
+#include <asm/err_ev6.h>
+#include <asm/irq_regs.h>
+
+#include "err_impl.h"
+#include "proto.h"
+
+
+static int
+titan_parse_c_misc(u64 c_misc, int print)
+{
+#ifdef CONFIG_VERBOSE_MCHECK
+	char *src;
+	int nxs = 0;
+#endif
+	int status = MCHK_DISPOSITION_REPORT;
+
+#define TITAN__CCHIP_MISC__NXM		(1UL << 28)
+#define TITAN__CCHIP_MISC__NXS__S	(29)
+#define TITAN__CCHIP_MISC__NXS__M	(0x7)
+
+	if (!(c_misc & TITAN__CCHIP_MISC__NXM))
+		return MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (!print)
+		return status;
+
+	nxs = EXTRACT(c_misc, TITAN__CCHIP_MISC__NXS);
+	switch(nxs) {
+	case 0:	/* CPU 0 */
+	case 1:	/* CPU 1 */
+	case 2:	/* CPU 2 */
+	case 3:	/* CPU 3 */
+		src = "CPU";
+		/* num is already the CPU number */
+		break;
+	case 4:	/* Pchip 0 */
+	case 5:	/* Pchip 1 */
+		src = "Pchip";
+		nxs -= 4;
+		break;
+	default:/* reserved */
+		src = "Unknown, NXS =";
+		/* leave num untouched */
+		break;
+	}
+
+	printk("%s    Non-existent memory access from: %s %d\n", 
+	       err_print_prefix, src, nxs);
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+	return status;
+}
+
+static int
+titan_parse_p_serror(int which, u64 serror, int print)
+{
+	int status = MCHK_DISPOSITION_REPORT;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	static const char * const serror_src[] = {
+		"GPCI", "APCI", "AGP HP", "AGP LP"
+	};
+	static const char * const serror_cmd[] = {
+		"DMA Read", "DMA RMW", "SGTE Read", "Reserved"
+	};
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+#define TITAN__PCHIP_SERROR__LOST_UECC	(1UL << 0)
+#define TITAN__PCHIP_SERROR__UECC	(1UL << 1)
+#define TITAN__PCHIP_SERROR__CRE	(1UL << 2)
+#define TITAN__PCHIP_SERROR__NXIO	(1UL << 3)
+#define TITAN__PCHIP_SERROR__LOST_CRE	(1UL << 4)
+#define TITAN__PCHIP_SERROR__ECCMASK	(TITAN__PCHIP_SERROR__UECC |	  \
+					 TITAN__PCHIP_SERROR__CRE)
+#define TITAN__PCHIP_SERROR__ERRMASK	(TITAN__PCHIP_SERROR__LOST_UECC | \
+					 TITAN__PCHIP_SERROR__UECC |	  \
+					 TITAN__PCHIP_SERROR__CRE |	  \
+					 TITAN__PCHIP_SERROR__NXIO |	  \
+					 TITAN__PCHIP_SERROR__LOST_CRE)
+#define TITAN__PCHIP_SERROR__SRC__S	(52)
+#define TITAN__PCHIP_SERROR__SRC__M	(0x3)
+#define TITAN__PCHIP_SERROR__CMD__S	(54)
+#define TITAN__PCHIP_SERROR__CMD__M	(0x3)
+#define TITAN__PCHIP_SERROR__SYN__S	(56)
+#define TITAN__PCHIP_SERROR__SYN__M	(0xff)
+#define TITAN__PCHIP_SERROR__ADDR__S	(15)
+#define TITAN__PCHIP_SERROR__ADDR__M	(0xffffffffUL)
+
+	if (!(serror & TITAN__PCHIP_SERROR__ERRMASK))
+		return MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (!print)
+		return status;
+
+	printk("%s  PChip %d SERROR: %016llx\n",
+	       err_print_prefix, which, serror);
+	if (serror & TITAN__PCHIP_SERROR__ECCMASK) {
+		printk("%s    %sorrectable ECC Error:\n"
+		       "      Source: %-6s  Command: %-8s  Syndrome: 0x%08x\n"
+		       "      Address: 0x%llx\n",
+		       err_print_prefix,
+		       (serror & TITAN__PCHIP_SERROR__UECC) ? "Unc" : "C",
+		       serror_src[EXTRACT(serror, TITAN__PCHIP_SERROR__SRC)],
+		       serror_cmd[EXTRACT(serror, TITAN__PCHIP_SERROR__CMD)],
+		       (unsigned)EXTRACT(serror, TITAN__PCHIP_SERROR__SYN),
+		       EXTRACT(serror, TITAN__PCHIP_SERROR__ADDR));
+	}
+	if (serror & TITAN__PCHIP_SERROR__NXIO)
+		printk("%s    Non Existent I/O Error\n", err_print_prefix);
+	if (serror & TITAN__PCHIP_SERROR__LOST_UECC)
+		printk("%s    Lost Uncorrectable ECC Error\n", 
+		       err_print_prefix);
+	if (serror & TITAN__PCHIP_SERROR__LOST_CRE)
+		printk("%s    Lost Correctable ECC Error\n", err_print_prefix);
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+	return status;
+}
+
+static int 
+titan_parse_p_perror(int which, int port, u64 perror, int print)
+{
+	int cmd;
+	unsigned long addr;
+	int status = MCHK_DISPOSITION_REPORT;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	static const char * const perror_cmd[] = {
+		"Interrupt Acknowledge", "Special Cycle",
+		"I/O Read",		"I/O Write",
+		"Reserved",		"Reserved",
+		"Memory Read",		"Memory Write",
+		"Reserved",		"Reserved",
+		"Configuration Read",	"Configuration Write",
+		"Memory Read Multiple",	"Dual Address Cycle",
+		"Memory Read Line",	"Memory Write and Invalidate"
+	};
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+#define TITAN__PCHIP_PERROR__LOST	(1UL << 0)
+#define TITAN__PCHIP_PERROR__SERR	(1UL << 1)
+#define TITAN__PCHIP_PERROR__PERR	(1UL << 2)
+#define TITAN__PCHIP_PERROR__DCRTO	(1UL << 3)
+#define TITAN__PCHIP_PERROR__SGE	(1UL << 4)
+#define TITAN__PCHIP_PERROR__APE	(1UL << 5)
+#define TITAN__PCHIP_PERROR__TA		(1UL << 6)
+#define TITAN__PCHIP_PERROR__DPE	(1UL << 7)
+#define TITAN__PCHIP_PERROR__NDS	(1UL << 8)
+#define TITAN__PCHIP_PERROR__IPTPR	(1UL << 9)
+#define TITAN__PCHIP_PERROR__IPTPW	(1UL << 10)
+#define TITAN__PCHIP_PERROR__ERRMASK	(TITAN__PCHIP_PERROR__LOST |	\
+					 TITAN__PCHIP_PERROR__SERR |	\
+					 TITAN__PCHIP_PERROR__PERR |	\
+					 TITAN__PCHIP_PERROR__DCRTO |	\
+					 TITAN__PCHIP_PERROR__SGE |	\
+					 TITAN__PCHIP_PERROR__APE |	\
+					 TITAN__PCHIP_PERROR__TA |	\
+					 TITAN__PCHIP_PERROR__DPE |	\
+					 TITAN__PCHIP_PERROR__NDS |	\
+					 TITAN__PCHIP_PERROR__IPTPR |	\
+					 TITAN__PCHIP_PERROR__IPTPW)
+#define TITAN__PCHIP_PERROR__DAC	(1UL << 47)
+#define TITAN__PCHIP_PERROR__MWIN	(1UL << 48)
+#define TITAN__PCHIP_PERROR__CMD__S	(52)
+#define TITAN__PCHIP_PERROR__CMD__M	(0x0f)
+#define TITAN__PCHIP_PERROR__ADDR__S	(14)
+#define TITAN__PCHIP_PERROR__ADDR__M	(0x1fffffffful)
+
+	if (!(perror & TITAN__PCHIP_PERROR__ERRMASK))
+		return MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+	cmd = EXTRACT(perror, TITAN__PCHIP_PERROR__CMD);
+	addr = EXTRACT(perror, TITAN__PCHIP_PERROR__ADDR) << 2;
+
+	/*
+	 * Initializing the BIOS on a video card on a bus without
+	 * a south bridge (subtractive decode agent) can result in 
+	 * master aborts as the BIOS probes the capabilities of the
+	 * card. XFree86 does such initialization. If the error
+	 * is a master abort (No DevSel as PCI Master) and the command
+	 * is an I/O read or write below the address where we start
+	 * assigning PCI I/O spaces (SRM uses 0x1000), then mark the
+	 * error as dismissable so starting XFree86 doesn't result
+	 * in a series of uncorrectable errors being reported. Also
+	 * dismiss master aborts to VGA frame buffer space
+	 * (0xA0000 - 0xC0000) and legacy BIOS space (0xC0000 - 0x100000)
+	 * for the same reason.
+	 *
+	 * Also mark the error dismissible if it looks like the right
+	 * error but only the Lost bit is set. Since the BIOS initialization
+	 * can cause multiple master aborts and the error interrupt can
+	 * be handled on a different CPU than the BIOS code is run on,
+	 * it is possible for a second master abort to occur between the
+	 * time the PALcode reads PERROR and the time it writes PERROR
+	 * to acknowledge the error. If this timing happens, a second
+	 * error will be signalled after the first, and if no additional
+	 * errors occur, will look like a Lost error with no additional 
+	 * errors on the same transaction as the previous error.
+	 */
+	if (((perror & TITAN__PCHIP_PERROR__NDS) || 
+	     ((perror & TITAN__PCHIP_PERROR__ERRMASK) == 
+	      TITAN__PCHIP_PERROR__LOST)) &&
+	    ((((cmd & 0xE) == 2) && (addr < 0x1000)) ||
+	     (((cmd & 0xE) == 6) && (addr >= 0xA0000) && (addr < 0x100000)))) {
+		status = MCHK_DISPOSITION_DISMISS;
+	}
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (!print) 
+		return status;
+
+	printk("%s  PChip %d %cPERROR: %016llx\n",
+	       err_print_prefix, which, 
+	       port ? 'A' : 'G', perror);
+	if (perror & TITAN__PCHIP_PERROR__IPTPW)
+		printk("%s    Invalid Peer-to-Peer Write\n", err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__IPTPR)
+		printk("%s    Invalid Peer-to-Peer Read\n", err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__NDS)
+		printk("%s    No DEVSEL as PCI Master [Master Abort]\n",
+		       err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__DPE)
+		printk("%s    Data Parity Error\n", err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__TA)
+		printk("%s    Target Abort\n", err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__APE)
+		printk("%s    Address Parity Error\n", err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__SGE)
+		printk("%s    Scatter-Gather Error, Invalid PTE\n", 
+		       err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__DCRTO)
+		printk("%s    Delayed-Completion Retry Timeout\n", 
+		       err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__PERR)
+		printk("%s    PERR Asserted\n", err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__SERR)
+		printk("%s    SERR Asserted\n", err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__LOST)
+		printk("%s    Lost Error\n", err_print_prefix);
+	printk("%s      Command: 0x%x - %s\n"
+		 "      Address: 0x%lx\n",
+	       err_print_prefix,
+	       cmd, perror_cmd[cmd],
+	       addr);
+	if (perror & TITAN__PCHIP_PERROR__DAC)
+		printk("%s      Dual Address Cycle\n", err_print_prefix);
+	if (perror & TITAN__PCHIP_PERROR__MWIN)
+		printk("%s      Hit in Monster Window\n", err_print_prefix);
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+	return status;
+}
+
+static int
+titan_parse_p_agperror(int which, u64 agperror, int print)
+{
+	int status = MCHK_DISPOSITION_REPORT;
+#ifdef CONFIG_VERBOSE_MCHECK
+	int cmd, len;
+	unsigned long addr;
+
+	static const char * const agperror_cmd[] = {
+		"Read (low-priority)",	"Read (high-priority)",
+		"Write (low-priority)",	"Write (high-priority)",
+		"Reserved",		"Reserved",
+		"Flush",		"Fence"
+	};
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+#define TITAN__PCHIP_AGPERROR__LOST	(1UL << 0)
+#define TITAN__PCHIP_AGPERROR__LPQFULL	(1UL << 1)
+#define TITAN__PCHIP_AGPERROR__HPQFULL	(1UL << 2)
+#define TITAN__PCHIP_AGPERROR__RESCMD	(1UL << 3)
+#define TITAN__PCHIP_AGPERROR__IPTE	(1UL << 4)
+#define TITAN__PCHIP_AGPERROR__PTP	(1UL << 5)
+#define TITAN__PCHIP_AGPERROR__NOWINDOW	(1UL << 6)
+#define TITAN__PCHIP_AGPERROR__ERRMASK	(TITAN__PCHIP_AGPERROR__LOST |    \
+					 TITAN__PCHIP_AGPERROR__LPQFULL | \
+					 TITAN__PCHIP_AGPERROR__HPQFULL | \
+					 TITAN__PCHIP_AGPERROR__RESCMD |  \
+					 TITAN__PCHIP_AGPERROR__IPTE |    \
+					 TITAN__PCHIP_AGPERROR__PTP |     \
+					 TITAN__PCHIP_AGPERROR__NOWINDOW)
+#define TITAN__PCHIP_AGPERROR__DAC	(1UL << 48)
+#define TITAN__PCHIP_AGPERROR__MWIN	(1UL << 49)
+#define TITAN__PCHIP_AGPERROR__FENCE	(1UL << 59)
+#define TITAN__PCHIP_AGPERROR__CMD__S	(50)
+#define TITAN__PCHIP_AGPERROR__CMD__M	(0x07)
+#define TITAN__PCHIP_AGPERROR__ADDR__S	(15)
+#define TITAN__PCHIP_AGPERROR__ADDR__M  (0xffffffffUL)
+#define TITAN__PCHIP_AGPERROR__LEN__S	(53)
+#define TITAN__PCHIP_AGPERROR__LEN__M	(0x3f)
+
+	if (!(agperror & TITAN__PCHIP_AGPERROR__ERRMASK))
+		return MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (!print)
+		return status;
+
+	cmd = EXTRACT(agperror, TITAN__PCHIP_AGPERROR__CMD);
+	addr = EXTRACT(agperror, TITAN__PCHIP_AGPERROR__ADDR) << 3;
+	len = EXTRACT(agperror, TITAN__PCHIP_AGPERROR__LEN);
+
+	printk("%s  PChip %d AGPERROR: %016llx\n", err_print_prefix,
+	       which, agperror);
+	if (agperror & TITAN__PCHIP_AGPERROR__NOWINDOW)
+		printk("%s    No Window\n", err_print_prefix);
+	if (agperror & TITAN__PCHIP_AGPERROR__PTP)
+		printk("%s    Peer-to-Peer set\n", err_print_prefix);
+	if (agperror & TITAN__PCHIP_AGPERROR__IPTE)
+		printk("%s    Invalid PTE\n", err_print_prefix);
+	if (agperror & TITAN__PCHIP_AGPERROR__RESCMD)
+		printk("%s    Reserved Command\n", err_print_prefix);
+	if (agperror & TITAN__PCHIP_AGPERROR__HPQFULL)
+		printk("%s    HP Transaction Received while Queue Full\n", 
+		       err_print_prefix);
+	if (agperror & TITAN__PCHIP_AGPERROR__LPQFULL)
+		printk("%s    LP Transaction Received while Queue Full\n", 
+		       err_print_prefix);
+	if (agperror & TITAN__PCHIP_AGPERROR__LOST)
+		printk("%s    Lost Error\n", err_print_prefix);
+	printk("%s      Command: 0x%x - %s, %d Quadwords%s\n"
+		 "      Address: 0x%lx\n",
+	       err_print_prefix, cmd, agperror_cmd[cmd], len,
+	       (agperror & TITAN__PCHIP_AGPERROR__FENCE) ? ", FENCE" : "",
+	       addr);
+	if (agperror & TITAN__PCHIP_AGPERROR__DAC)
+		printk("%s      Dual Address Cycle\n", err_print_prefix);
+	if (agperror & TITAN__PCHIP_AGPERROR__MWIN)
+		printk("%s      Hit in Monster Window\n", err_print_prefix);
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+	return status;
+}	
+
+static int
+titan_parse_p_chip(int which, u64 serror, u64 gperror, 
+		   u64 aperror, u64 agperror, int print)
+{
+	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
+	status |= titan_parse_p_serror(which, serror, print);
+	status |= titan_parse_p_perror(which, 0, gperror, print);
+	status |= titan_parse_p_perror(which, 1, aperror, print);
+	status |= titan_parse_p_agperror(which, agperror, print);
+	return status;
+}
+
+int
+titan_process_logout_frame(struct el_common *mchk_header, int print)
+{
+	struct el_TITAN_sysdata_mcheck *tmchk =
+		(struct el_TITAN_sysdata_mcheck *)
+		((unsigned long)mchk_header + mchk_header->sys_offset);
+	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+	status |= titan_parse_c_misc(tmchk->c_misc, print);
+	status |= titan_parse_p_chip(0, tmchk->p0_serror, tmchk->p0_gperror,
+				     tmchk->p0_aperror, tmchk->p0_agperror, 
+				     print);
+	status |= titan_parse_p_chip(1, tmchk->p1_serror, tmchk->p1_gperror,
+				     tmchk->p1_aperror, tmchk->p1_agperror, 
+				     print);
+
+	return status;
+}
+
+void
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	struct el_common *mchk_header = (struct el_common *)la_ptr;
+	struct el_TITAN_sysdata_mcheck *tmchk =
+		(struct el_TITAN_sysdata_mcheck *)
+		((unsigned long)mchk_header + mchk_header->sys_offset);
+	u64 irqmask;
+
+	/*
+	 * Mask of Titan interrupt sources which are reported as machine checks
+	 *
+	 * 63 - CChip Error
+	 * 62 - PChip 0 H_Error
+	 * 61 - PChip 1 H_Error
+	 * 60 - PChip 0 C_Error
+	 * 59 - PChip 1 C_Error
+	 */
+#define TITAN_MCHECK_INTERRUPT_MASK	0xF800000000000000UL
+
+	/*
+	 * Sync the processor
+	 */
+	mb();
+	draina();
+	
+	/*
+	 * Only handle system errors here 
+	 */
+	if ((vector != SCB_Q_SYSMCHK) && (vector != SCB_Q_SYSERR)) {
+		ev6_machine_check(vector, la_ptr);
+		return;
+	}
+
+	/* 
+	 * It's a system error, handle it here
+	 *
+	 * The PALcode has already cleared the error, so just parse it
+	 */
+	
+	/* 
+	 * Parse the logout frame without printing first. If the only error(s)
+	 * found are classified as "dismissable", then just dismiss them and
+	 * don't print any message
+	 */
+	if (titan_process_logout_frame(mchk_header, 0) != 
+	    MCHK_DISPOSITION_DISMISS) {
+		char *saved_err_prefix = err_print_prefix;
+		err_print_prefix = KERN_CRIT;
+
+		/*
+		 * Either a nondismissable error was detected or no
+		 * recognized error was detected  in the logout frame 
+		 * -- report the error in either case
+		 */
+		printk("%s"
+		       "*System %s Error (Vector 0x%x) reported on CPU %d:\n", 
+		       err_print_prefix,
+		       (vector == SCB_Q_SYSERR)?"Correctable":"Uncorrectable",
+		       (unsigned int)vector, (int)smp_processor_id());
+		
+#ifdef CONFIG_VERBOSE_MCHECK
+		titan_process_logout_frame(mchk_header, alpha_verbose_mcheck);
+		if (alpha_verbose_mcheck)
+			dik_show_regs(get_irq_regs(), NULL);
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+		err_print_prefix = saved_err_prefix;
+
+		/*
+		 * Convert any pending interrupts which report as system
+		 * machine checks to interrupts
+		 */
+		irqmask = tmchk->c_dirx & TITAN_MCHECK_INTERRUPT_MASK;
+		titan_dispatch_irqs(irqmask);
+	}	
+
+
+	/* 
+	 * Release the logout frame 
+	 */
+	wrmces(0x7);
+	mb();
+}
+
+/*
+ * Subpacket Annotations
+ */
+static char *el_titan_pchip0_extended_annotation[] = {
+	"Subpacket Header", 	"P0_SCTL",	"P0_SERREN",
+	"P0_APCTL",		"P0_APERREN",	"P0_AGPERREN",
+	"P0_ASPRST",		"P0_AWSBA0",	"P0_AWSBA1",
+	"P0_AWSBA2",		"P0_AWSBA3",	"P0_AWSM0",
+	"P0_AWSM1",		"P0_AWSM2",	"P0_AWSM3",
+	"P0_ATBA0",		"P0_ATBA1",	"P0_ATBA2",
+	"P0_ATBA3",		"P0_GPCTL",	"P0_GPERREN",
+	"P0_GSPRST",		"P0_GWSBA0",	"P0_GWSBA1",
+	"P0_GWSBA2",		"P0_GWSBA3",	"P0_GWSM0",
+	"P0_GWSM1",		"P0_GWSM2",	"P0_GWSM3",
+	"P0_GTBA0",		"P0_GTBA1",	"P0_GTBA2",
+	"P0_GTBA3",		NULL 
+};
+static char *el_titan_pchip1_extended_annotation[] = {
+	"Subpacket Header", 	"P1_SCTL",	"P1_SERREN",
+	"P1_APCTL",		"P1_APERREN",	"P1_AGPERREN",
+	"P1_ASPRST",		"P1_AWSBA0",	"P1_AWSBA1",
+	"P1_AWSBA2",		"P1_AWSBA3",	"P1_AWSM0",
+	"P1_AWSM1",		"P1_AWSM2",	"P1_AWSM3",
+	"P1_ATBA0",		"P1_ATBA1",	"P1_ATBA2",
+	"P1_ATBA3",		"P1_GPCTL",	"P1_GPERREN",
+	"P1_GSPRST",		"P1_GWSBA0",	"P1_GWSBA1",
+	"P1_GWSBA2",		"P1_GWSBA3",	"P1_GWSM0",
+	"P1_GWSM1",		"P1_GWSM2",	"P1_GWSM3",
+	"P1_GTBA0",		"P1_GTBA1",	"P1_GTBA2",
+	"P1_GTBA3",		NULL 
+};
+static char *el_titan_memory_extended_annotation[] = {
+	"Subpacket Header", 	"AAR0",		"AAR1",
+	"AAR2",			"AAR3",		"P0_SCTL",
+	"P0_GPCTL",		"P0_APCTL",	"P1_SCTL",
+	"P1_GPCTL",		"P1_SCTL",	NULL 
+};
+
+static struct el_subpacket_annotation el_titan_annotations[] = {
+	SUBPACKET_ANNOTATION(EL_CLASS__REGATTA_FAMILY,
+			     EL_TYPE__REGATTA__TITAN_PCHIP0_EXTENDED,
+			     1,
+			     "Titan PChip 0 Extended Frame",
+			     el_titan_pchip0_extended_annotation),
+	SUBPACKET_ANNOTATION(EL_CLASS__REGATTA_FAMILY,
+			     EL_TYPE__REGATTA__TITAN_PCHIP1_EXTENDED,
+			     1,
+			     "Titan PChip 1 Extended Frame",
+			     el_titan_pchip1_extended_annotation),
+	SUBPACKET_ANNOTATION(EL_CLASS__REGATTA_FAMILY,
+			     EL_TYPE__REGATTA__TITAN_MEMORY_EXTENDED,
+			     1,
+			     "Titan Memory Extended Frame",
+			     el_titan_memory_extended_annotation),
+	SUBPACKET_ANNOTATION(EL_CLASS__REGATTA_FAMILY,
+			     EL_TYPE__TERMINATION__TERMINATION,
+			     1,
+			     "Termination Subpacket",
+			     NULL)
+};
+
+static struct el_subpacket *
+el_process_regatta_subpacket(struct el_subpacket *header)
+{
+	if (header->class != EL_CLASS__REGATTA_FAMILY) {
+		printk("%s  ** Unexpected header CLASS %d TYPE %d, aborting\n",
+		       err_print_prefix,
+		       header->class, header->type);
+		return NULL;
+	}
+
+	switch(header->type) {
+	case EL_TYPE__REGATTA__PROCESSOR_ERROR_FRAME:
+	case EL_TYPE__REGATTA__SYSTEM_ERROR_FRAME:
+	case EL_TYPE__REGATTA__ENVIRONMENTAL_FRAME:
+	case EL_TYPE__REGATTA__PROCESSOR_DBL_ERROR_HALT:
+	case EL_TYPE__REGATTA__SYSTEM_DBL_ERROR_HALT:
+		printk("%s  ** Occurred on CPU %d:\n", 
+		       err_print_prefix,
+		       (int)header->by_type.regatta_frame.cpuid);
+		privateer_process_logout_frame((struct el_common *)
+			header->by_type.regatta_frame.data_start, 1);
+		break;
+	default:
+		printk("%s  ** REGATTA TYPE %d SUBPACKET\n", 
+		       err_print_prefix, header->type);
+		el_annotate_subpacket(header);
+		break;
+	}
+
+
+	return (struct el_subpacket *)((unsigned long)header + header->length);
+} 
+
+static struct el_subpacket_handler titan_subpacket_handler = 
+	SUBPACKET_HANDLER_INIT(EL_CLASS__REGATTA_FAMILY, 
+			       el_process_regatta_subpacket);
+
+void __init
+titan_register_error_handlers(void)
+{
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE (el_titan_annotations); i++)
+		cdl_register_subpacket_annotation(&el_titan_annotations[i]);
+
+	cdl_register_subpacket_handler(&titan_subpacket_handler);
+
+	ev6_register_error_handlers();
+}
+
+
+/*
+ * Privateer
+ */
+
+static int
+privateer_process_680_frame(struct el_common *mchk_header, int print)
+{
+	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
+#ifdef CONFIG_VERBOSE_MCHECK
+	struct el_PRIVATEER_envdata_mcheck *emchk =
+		(struct el_PRIVATEER_envdata_mcheck *)
+		((unsigned long)mchk_header + mchk_header->sys_offset);
+
+	/* TODO - categorize errors, for now, no error */
+
+	if (!print)
+		return status;
+
+	/* TODO - decode instead of just dumping... */
+	printk("%s  Summary Flags:         %016llx\n"
+ 	         "  CChip DIRx:            %016llx\n"
+		 "  System Management IR:  %016llx\n"
+		 "  CPU IR:                %016llx\n"
+		 "  Power Supply IR:       %016llx\n"
+		 "  LM78 Fault Status:     %016llx\n"
+		 "  System Doors:          %016llx\n"
+		 "  Temperature Warning:   %016llx\n"
+		 "  Fan Control:           %016llx\n"
+		 "  Fatal Power Down Code: %016llx\n",
+	       err_print_prefix,
+	       emchk->summary,
+	       emchk->c_dirx,
+	       emchk->smir,
+	       emchk->cpuir,
+	       emchk->psir,
+	       emchk->fault,
+	       emchk->sys_doors,
+	       emchk->temp_warn,
+	       emchk->fan_ctrl,
+	       emchk->code);
+#endif /* CONFIG_VERBOSE_MCHECK */
+
+	return status;
+}
+
+int
+privateer_process_logout_frame(struct el_common *mchk_header, int print)
+{
+	struct el_common_EV6_mcheck *ev6mchk = 
+		(struct el_common_EV6_mcheck *)mchk_header;
+	int status = MCHK_DISPOSITION_UNKNOWN_ERROR;
+
+	/*
+	 * Machine check codes
+	 */
+#define PRIVATEER_MCHK__CORR_ECC		0x86	/* 630 */
+#define PRIVATEER_MCHK__DC_TAG_PERR		0x9E	/* 630 */
+#define PRIVATEER_MCHK__PAL_BUGCHECK		0x8E	/* 670 */
+#define PRIVATEER_MCHK__OS_BUGCHECK		0x90	/* 670 */
+#define PRIVATEER_MCHK__PROC_HRD_ERR		0x98	/* 670 */
+#define PRIVATEER_MCHK__ISTREAM_CMOV_PRX	0xA0	/* 670 */
+#define PRIVATEER_MCHK__ISTREAM_CMOV_FLT	0xA2	/* 670 */
+#define PRIVATEER_MCHK__SYS_HRD_ERR		0x202	/* 660 */
+#define PRIVATEER_MCHK__SYS_CORR_ERR		0x204	/* 620 */
+#define PRIVATEER_MCHK__SYS_ENVIRON		0x206	/* 680 */
+
+	switch(ev6mchk->MCHK_Code) {
+	/*
+	 * Vector 630 - Processor, Correctable
+	 */
+	case PRIVATEER_MCHK__CORR_ECC:
+	case PRIVATEER_MCHK__DC_TAG_PERR:
+		/*
+		 * Fall through to vector 670 for processing...
+		 */
+	/*
+	 * Vector 670 - Processor, Uncorrectable
+	 */
+	case PRIVATEER_MCHK__PAL_BUGCHECK:
+	case PRIVATEER_MCHK__OS_BUGCHECK:
+	case PRIVATEER_MCHK__PROC_HRD_ERR:
+	case PRIVATEER_MCHK__ISTREAM_CMOV_PRX:
+	case PRIVATEER_MCHK__ISTREAM_CMOV_FLT:
+		status |= ev6_process_logout_frame(mchk_header, print);
+		break;
+
+	/*
+	 * Vector 620 - System, Correctable
+	 */
+	case PRIVATEER_MCHK__SYS_CORR_ERR:
+		/*
+		 * Fall through to vector 660 for processing...
+		 */
+	/*
+	 * Vector 660 - System, Uncorrectable
+	 */
+	case PRIVATEER_MCHK__SYS_HRD_ERR:
+		status |= titan_process_logout_frame(mchk_header, print);
+		break;
+
+	/* 
+	 * Vector 680 - System, Environmental
+	 */
+	case PRIVATEER_MCHK__SYS_ENVIRON:	/* System, Environmental */
+		status |= privateer_process_680_frame(mchk_header, print);
+		break;
+
+	/* 
+	 * Unknown
+	 */
+	default:
+		status |= MCHK_DISPOSITION_REPORT;
+		if (print) {
+			printk("%s** Unknown Error, frame follows\n", 
+			       err_print_prefix);
+			mchk_dump_logout_frame(mchk_header);
+		}
+
+	}
+
+	return status;
+}
+
+void
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	struct el_common *mchk_header = (struct el_common *)la_ptr;
+	struct el_TITAN_sysdata_mcheck *tmchk =
+		(struct el_TITAN_sysdata_mcheck *)
+		(la_ptr + mchk_header->sys_offset);
+	u64 irqmask;
+	char *saved_err_prefix = err_print_prefix;
+
+#define PRIVATEER_680_INTERRUPT_MASK		(0xE00UL)
+#define PRIVATEER_HOTPLUG_INTERRUPT_MASK	(0xE00UL)
+
+	/*
+	 * Sync the processor.
+	 */
+	mb();
+	draina();
+
+	/* 
+	 * Only handle system events here.
+	 */
+	if (vector != SCB_Q_SYSEVENT) 
+		return titan_machine_check(vector, la_ptr);
+
+	/*
+	 * Report the event - System Events should be reported even if no
+	 * error is indicated since the event could indicate the return
+	 * to normal status.
+	 */
+	err_print_prefix = KERN_CRIT;
+	printk("%s*System Event (Vector 0x%x) reported on CPU %d:\n", 
+	       err_print_prefix,
+	       (unsigned int)vector, (int)smp_processor_id());
+	privateer_process_680_frame(mchk_header, 1);
+	err_print_prefix = saved_err_prefix;
+	
+	/* 
+	 * Convert any pending interrupts which report as 680 machine
+	 * checks to interrupts.
+	 */
+	irqmask = tmchk->c_dirx & PRIVATEER_680_INTERRUPT_MASK;
+
+	/*
+	 * Dispatch the interrupt(s).
+	 */
+	titan_dispatch_irqs(irqmask);
+
+	/* 
+	 * Release the logout frame.
+	 */
+	wrmces(0x7);
+	mb();
+}
diff --git a/arch/alpha/kernel/es1888.c b/arch/alpha/kernel/es1888.c
new file mode 100644
index 0000000000..297476bb08
--- /dev/null
+++ b/arch/alpha/kernel/es1888.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/es1888.c
+ *
+ * Init the built-in ES1888 sound chip (SB16 compatible)
+ */
+
+#include <linux/init.h>
+#include <asm/io.h>
+#include "proto.h"
+
+void __init
+es1888_init(void)
+{
+	/* Sequence of IO reads to init the audio controller */
+	inb(0x0229);
+	inb(0x0229);
+	inb(0x0229);
+	inb(0x022b);
+	inb(0x0229);
+	inb(0x022b);
+	inb(0x0229);
+	inb(0x0229);
+	inb(0x022b);
+	inb(0x0229);
+	inb(0x0220); /* This sets the base address to 0x220 */
+
+	/* Sequence to set DMA channels */
+	outb(0x01, 0x0226);		/* reset */
+	inb(0x0226);			/* pause */
+	outb(0x00, 0x0226);		/* release reset */
+	while (!(inb(0x022e) & 0x80))	/* wait for bit 7 to assert*/
+		continue;
+	inb(0x022a);			/* pause */
+	outb(0xc6, 0x022c);		/* enable extended mode */
+	inb(0x022a);			/* pause, also forces the write */
+	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
+		continue;
+	outb(0xb1, 0x022c);		/* setup for write to Interrupt CR */
+	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
+		continue;
+	outb(0x14, 0x022c);		/* set IRQ 5 */
+	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
+		continue;
+	outb(0xb2, 0x022c);		/* setup for write to DMA CR */
+	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
+		continue;
+	outb(0x18, 0x022c);		/* set DMA channel 1 */
+	inb(0x022c);			/* force the write */
+}
diff --git a/arch/alpha/kernel/gct.c b/arch/alpha/kernel/gct.c
new file mode 100644
index 0000000000..8ac0088dca
--- /dev/null
+++ b/arch/alpha/kernel/gct.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/gct.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#include <asm/hwrpb.h>
+#include <asm/gct.h>
+
+int
+gct6_find_nodes(gct6_node *node, gct6_search_struct *search)
+{
+	gct6_search_struct *wanted;
+	int status = 0;
+
+	/* First check the magic number.  */
+	if (node->magic != GCT_NODE_MAGIC) {
+		printk(KERN_ERR "GCT Node MAGIC incorrect - GCT invalid\n");
+		return -EINVAL;
+	}
+
+	/* Check against the search struct.  */
+	for (wanted = search; 
+	     wanted && (wanted->type | wanted->subtype); 
+	     wanted++) {
+		if (node->type != wanted->type)
+			continue;
+		if (node->subtype != wanted->subtype)
+			continue;
+
+		/* Found it -- call out.  */
+		if (wanted->callout)
+			wanted->callout(node);
+	}
+
+	/* Now walk the tree, siblings first.  */
+	if (node->next) 
+		status |= gct6_find_nodes(GCT_NODE_PTR(node->next), search);
+
+	/* Then the children.  */
+	if (node->child) 
+		status |= gct6_find_nodes(GCT_NODE_PTR(node->child), search);
+
+	return status;
+}
diff --git a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S
new file mode 100644
index 0000000000..bb48a8ae4e
--- /dev/null
+++ b/arch/alpha/kernel/head.S
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/alpha/kernel/head.S
+ *
+ * initial boot stuff.. At this point, the bootloader has already
+ * switched into OSF/1 PAL-code, and loaded us at the correct address
+ * (START_ADDR).  So there isn't much left for us to do: just set up
+ * the kernel global pointer and jump to the kernel entry-point.
+ */
+
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/pal.h>
+#include <asm/setup.h>
+
+__HEAD
+.globl _stext
+	.set noreorder
+	.globl	__start
+	.ent	__start
+_stext:
+__start:
+	.prologue 0
+	br	$27,1f
+1:	ldgp	$29,0($27)
+	/* We need to get current_task_info loaded up...  */
+	lda	$8,init_thread_union
+	/* ... and find our stack ... */
+	lda	$30,0x4000 - SIZEOF_PT_REGS($8)
+	/* ... and then we can start the kernel.  */
+	jsr	$26,start_kernel
+	call_pal PAL_halt
+	.end __start
+
+#ifdef CONFIG_SMP
+	.align 3
+	.globl	__smp_callin
+	.ent	__smp_callin
+	/* On entry here from SRM console, the HWPCB of the per-cpu
+	   slot for this processor has been loaded.  We've arranged
+	   for the UNIQUE value for this process to contain the PCBB
+	   of the target idle task.  */
+__smp_callin:
+	.prologue 1
+	ldgp	$29,0($27)	# First order of business, load the GP.
+
+	call_pal PAL_rduniq	# Grab the target PCBB.
+	mov	$0,$16		# Install it.
+	call_pal PAL_swpctx
+
+	lda	$8,0x3fff	# Find "current".
+	bic	$30,$8,$8
+	
+	jsr	$26,smp_callin
+	call_pal PAL_halt
+	.end __smp_callin
+#endif /* CONFIG_SMP */
+
+	#
+	# The following two functions are needed for supporting SRM PALcode
+	# on the PC164 (at least), since that PALcode manages the interrupt
+	# masking, and we cannot duplicate the effort without causing problems
+	#
+
+	.align 3
+	.globl	cserve_ena
+	.ent	cserve_ena
+cserve_ena:
+	.prologue 0
+	bis	$16,$16,$17
+	lda	$16,52($31)
+	call_pal PAL_cserve
+	ret	($26)
+	.end	cserve_ena
+
+	.align 3
+	.globl	cserve_dis
+	.ent	cserve_dis
+cserve_dis:
+	.prologue 0
+	bis	$16,$16,$17
+	lda	$16,53($31)
+	call_pal PAL_cserve
+	ret	($26)
+	.end	cserve_dis
+
+	#
+	# It is handy, on occasion, to make halt actually just loop. 
+	# Putting it here means we dont have to recompile the whole
+	# kernel.
+	#
+
+	.align 3
+	.globl	halt
+	.ent	halt
+halt:
+	.prologue 0
+	call_pal PAL_halt
+	.end	halt
diff --git a/arch/alpha/kernel/io.c b/arch/alpha/kernel/io.c
new file mode 100644
index 0000000000..eda0977826
--- /dev/null
+++ b/arch/alpha/kernel/io.c
@@ -0,0 +1,694 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Alpha IO and memory functions.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <asm/io.h>
+
+/* Out-of-line versions of the i/o routines that redirect into the 
+   platform-specific version.  Note that "platform-specific" may mean
+   "generic", which bumps through the machine vector.  */
+
+unsigned int
+ioread8(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	mb();
+	return ret;
+}
+
+unsigned int ioread16(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	mb();
+	return ret;
+}
+
+unsigned int ioread32(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	mb();
+	return ret;
+}
+
+u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
+	mb();
+	return ret;
+}
+
+void iowrite8(u8 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
+}
+
+void iowrite16(u16 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
+}
+
+void iowrite32(u32 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
+}
+
+void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite64)(b, addr);
+}
+
+EXPORT_SYMBOL(ioread8);
+EXPORT_SYMBOL(ioread16);
+EXPORT_SYMBOL(ioread32);
+EXPORT_SYMBOL(ioread64);
+EXPORT_SYMBOL(iowrite8);
+EXPORT_SYMBOL(iowrite16);
+EXPORT_SYMBOL(iowrite32);
+EXPORT_SYMBOL(iowrite64);
+
+u8 inb(unsigned long port)
+{
+	return ioread8(ioport_map(port, 1));
+}
+
+u16 inw(unsigned long port)
+{
+	return ioread16(ioport_map(port, 2));
+}
+
+u32 inl(unsigned long port)
+{
+	return ioread32(ioport_map(port, 4));
+}
+
+void outb(u8 b, unsigned long port)
+{
+	iowrite8(b, ioport_map(port, 1));
+}
+
+void outw(u16 b, unsigned long port)
+{
+	iowrite16(b, ioport_map(port, 2));
+}
+
+void outl(u32 b, unsigned long port)
+{
+	iowrite32(b, ioport_map(port, 4));
+}
+
+EXPORT_SYMBOL(inb);
+EXPORT_SYMBOL(inw);
+EXPORT_SYMBOL(inl);
+EXPORT_SYMBOL(outb);
+EXPORT_SYMBOL(outw);
+EXPORT_SYMBOL(outl);
+
+u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readb)(addr);
+}
+
+u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readw)(addr);
+}
+
+u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readl)(addr);
+}
+
+u64 __raw_readq(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readq)(addr);
+}
+
+void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writeb)(b, addr);
+}
+
+void __raw_writew(u16 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writew)(b, addr);
+}
+
+void __raw_writel(u32 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writel)(b, addr);
+}
+
+void __raw_writeq(u64 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writeq)(b, addr);
+}
+
+EXPORT_SYMBOL(__raw_readb); 
+EXPORT_SYMBOL(__raw_readw); 
+EXPORT_SYMBOL(__raw_readl); 
+EXPORT_SYMBOL(__raw_readq); 
+EXPORT_SYMBOL(__raw_writeb); 
+EXPORT_SYMBOL(__raw_writew); 
+EXPORT_SYMBOL(__raw_writel); 
+EXPORT_SYMBOL(__raw_writeq); 
+
+u8 readb(const volatile void __iomem *addr)
+{
+	u8 ret;
+	mb();
+	ret = __raw_readb(addr);
+	mb();
+	return ret;
+}
+
+u16 readw(const volatile void __iomem *addr)
+{
+	u16 ret;
+	mb();
+	ret = __raw_readw(addr);
+	mb();
+	return ret;
+}
+
+u32 readl(const volatile void __iomem *addr)
+{
+	u32 ret;
+	mb();
+	ret = __raw_readl(addr);
+	mb();
+	return ret;
+}
+
+u64 readq(const volatile void __iomem *addr)
+{
+	u64 ret;
+	mb();
+	ret = __raw_readq(addr);
+	mb();
+	return ret;
+}
+
+void writeb(u8 b, volatile void __iomem *addr)
+{
+	mb();
+	__raw_writeb(b, addr);
+}
+
+void writew(u16 b, volatile void __iomem *addr)
+{
+	mb();
+	__raw_writew(b, addr);
+}
+
+void writel(u32 b, volatile void __iomem *addr)
+{
+	mb();
+	__raw_writel(b, addr);
+}
+
+void writeq(u64 b, volatile void __iomem *addr)
+{
+	mb();
+	__raw_writeq(b, addr);
+}
+
+EXPORT_SYMBOL(readb);
+EXPORT_SYMBOL(readw);
+EXPORT_SYMBOL(readl);
+EXPORT_SYMBOL(readq);
+EXPORT_SYMBOL(writeb);
+EXPORT_SYMBOL(writew);
+EXPORT_SYMBOL(writel);
+EXPORT_SYMBOL(writeq);
+
+/*
+ * The _relaxed functions must be ordered w.r.t. each other, but they don't
+ * have to be ordered w.r.t. other memory accesses.
+ */
+u8 readb_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readb(addr);
+}
+
+u16 readw_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readw(addr);
+}
+
+u32 readl_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readl(addr);
+}
+
+u64 readq_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readq(addr);
+}
+
+EXPORT_SYMBOL(readb_relaxed);
+EXPORT_SYMBOL(readw_relaxed);
+EXPORT_SYMBOL(readl_relaxed);
+EXPORT_SYMBOL(readq_relaxed);
+
+/*
+ * Read COUNT 8-bit bytes from port PORT into memory starting at SRC.
+ */
+void ioread8_rep(const void __iomem *port, void *dst, unsigned long count)
+{
+	while ((unsigned long)dst & 0x3) {
+		if (!count)
+			return;
+		count--;
+		*(unsigned char *)dst = ioread8(port);
+		dst += 1;
+	}
+
+	while (count >= 4) {
+		unsigned int w;
+		count -= 4;
+		w = ioread8(port);
+		w |= ioread8(port) << 8;
+		w |= ioread8(port) << 16;
+		w |= ioread8(port) << 24;
+		*(unsigned int *)dst = w;
+		dst += 4;
+	}
+
+	while (count) {
+		--count;
+		*(unsigned char *)dst = ioread8(port);
+		dst += 1;
+	}
+}
+
+void insb(unsigned long port, void *dst, unsigned long count)
+{
+	ioread8_rep(ioport_map(port, 1), dst, count);
+}
+
+EXPORT_SYMBOL(ioread8_rep);
+EXPORT_SYMBOL(insb);
+
+/*
+ * Read COUNT 16-bit words from port PORT into memory starting at
+ * SRC.  SRC must be at least short aligned.  This is used by the
+ * IDE driver to read disk sectors.  Performance is important, but
+ * the interfaces seems to be slow: just using the inlined version
+ * of the inw() breaks things.
+ */
+void ioread16_rep(const void __iomem *port, void *dst, unsigned long count)
+{
+	if (unlikely((unsigned long)dst & 0x3)) {
+		if (!count)
+			return;
+		BUG_ON((unsigned long)dst & 0x1);
+		count--;
+		*(unsigned short *)dst = ioread16(port);
+		dst += 2;
+	}
+
+	while (count >= 2) {
+		unsigned int w;
+		count -= 2;
+		w = ioread16(port);
+		w |= ioread16(port) << 16;
+		*(unsigned int *)dst = w;
+		dst += 4;
+	}
+
+	if (count) {
+		*(unsigned short*)dst = ioread16(port);
+	}
+}
+
+void insw(unsigned long port, void *dst, unsigned long count)
+{
+	ioread16_rep(ioport_map(port, 2), dst, count);
+}
+
+EXPORT_SYMBOL(ioread16_rep);
+EXPORT_SYMBOL(insw);
+
+
+/*
+ * Read COUNT 32-bit words from port PORT into memory starting at
+ * SRC. Now works with any alignment in SRC. Performance is important,
+ * but the interfaces seems to be slow: just using the inlined version
+ * of the inl() breaks things.
+ */
+void ioread32_rep(const void __iomem *port, void *dst, unsigned long count)
+{
+	if (unlikely((unsigned long)dst & 0x3)) {
+		while (count--) {
+			struct S { int x __attribute__((packed)); };
+			((struct S *)dst)->x = ioread32(port);
+			dst += 4;
+		}
+	} else {
+		/* Buffer 32-bit aligned.  */
+		while (count--) {
+			*(unsigned int *)dst = ioread32(port);
+			dst += 4;
+		}
+	}
+}
+
+void insl(unsigned long port, void *dst, unsigned long count)
+{
+	ioread32_rep(ioport_map(port, 4), dst, count);
+}
+
+EXPORT_SYMBOL(ioread32_rep);
+EXPORT_SYMBOL(insl);
+
+
+/*
+ * Like insb but in the opposite direction.
+ * Don't worry as much about doing aligned memory transfers:
+ * doing byte reads the "slow" way isn't nearly as slow as
+ * doing byte writes the slow way (no r-m-w cycle).
+ */
+void iowrite8_rep(void __iomem *port, const void *xsrc, unsigned long count)
+{
+	const unsigned char *src = xsrc;
+	while (count--)
+		iowrite8(*src++, port);
+}
+
+void outsb(unsigned long port, const void *src, unsigned long count)
+{
+	iowrite8_rep(ioport_map(port, 1), src, count);
+}
+
+EXPORT_SYMBOL(iowrite8_rep);
+EXPORT_SYMBOL(outsb);
+
+
+/*
+ * Like insw but in the opposite direction.  This is used by the IDE
+ * driver to write disk sectors.  Performance is important, but the
+ * interfaces seems to be slow: just using the inlined version of the
+ * outw() breaks things.
+ */
+void iowrite16_rep(void __iomem *port, const void *src, unsigned long count)
+{
+	if (unlikely((unsigned long)src & 0x3)) {
+		if (!count)
+			return;
+		BUG_ON((unsigned long)src & 0x1);
+		iowrite16(*(unsigned short *)src, port);
+		src += 2;
+		--count;
+	}
+
+	while (count >= 2) {
+		unsigned int w;
+		count -= 2;
+		w = *(unsigned int *)src;
+		src += 4;
+		iowrite16(w >>  0, port);
+		iowrite16(w >> 16, port);
+	}
+
+	if (count) {
+		iowrite16(*(unsigned short *)src, port);
+	}
+}
+
+void outsw(unsigned long port, const void *src, unsigned long count)
+{
+	iowrite16_rep(ioport_map(port, 2), src, count);
+}
+
+EXPORT_SYMBOL(iowrite16_rep);
+EXPORT_SYMBOL(outsw);
+
+
+/*
+ * Like insl but in the opposite direction.  This is used by the IDE
+ * driver to write disk sectors.  Works with any alignment in SRC.
+ * Performance is important, but the interfaces seems to be slow:
+ * just using the inlined version of the outl() breaks things.
+ */
+void iowrite32_rep(void __iomem *port, const void *src, unsigned long count)
+{
+	if (unlikely((unsigned long)src & 0x3)) {
+		while (count--) {
+			struct S { int x __attribute__((packed)); };
+			iowrite32(((struct S *)src)->x, port);
+			src += 4;
+		}
+	} else {
+		/* Buffer 32-bit aligned.  */
+		while (count--) {
+			iowrite32(*(unsigned int *)src, port);
+			src += 4;
+		}
+	}
+}
+
+void outsl(unsigned long port, const void *src, unsigned long count)
+{
+	iowrite32_rep(ioport_map(port, 4), src, count);
+}
+
+EXPORT_SYMBOL(iowrite32_rep);
+EXPORT_SYMBOL(outsl);
+
+
+/*
+ * Copy data from IO memory space to "real" memory space.
+ * This needs to be optimized.
+ */
+void memcpy_fromio(void *to, const volatile void __iomem *from, long count)
+{
+	/* Optimize co-aligned transfers.  Everything else gets handled
+	   a byte at a time. */
+
+	if (count >= 8 && ((u64)to & 7) == ((u64)from & 7)) {
+		count -= 8;
+		do {
+			*(u64 *)to = __raw_readq(from);
+			count -= 8;
+			to += 8;
+			from += 8;
+		} while (count >= 0);
+		count += 8;
+	}
+
+	if (count >= 4 && ((u64)to & 3) == ((u64)from & 3)) {
+		count -= 4;
+		do {
+			*(u32 *)to = __raw_readl(from);
+			count -= 4;
+			to += 4;
+			from += 4;
+		} while (count >= 0);
+		count += 4;
+	}
+
+	if (count >= 2 && ((u64)to & 1) == ((u64)from & 1)) {
+		count -= 2;
+		do {
+			*(u16 *)to = __raw_readw(from);
+			count -= 2;
+			to += 2;
+			from += 2;
+		} while (count >= 0);
+		count += 2;
+	}
+
+	while (count > 0) {
+		*(u8 *) to = __raw_readb(from);
+		count--;
+		to++;
+		from++;
+	}
+	mb();
+}
+
+EXPORT_SYMBOL(memcpy_fromio);
+
+
+/*
+ * Copy data from "real" memory space to IO memory space.
+ * This needs to be optimized.
+ */
+void memcpy_toio(volatile void __iomem *to, const void *from, long count)
+{
+	/* Optimize co-aligned transfers.  Everything else gets handled
+	   a byte at a time. */
+	/* FIXME -- align FROM.  */
+
+	if (count >= 8 && ((u64)to & 7) == ((u64)from & 7)) {
+		count -= 8;
+		do {
+			__raw_writeq(*(const u64 *)from, to);
+			count -= 8;
+			to += 8;
+			from += 8;
+		} while (count >= 0);
+		count += 8;
+	}
+
+	if (count >= 4 && ((u64)to & 3) == ((u64)from & 3)) {
+		count -= 4;
+		do {
+			__raw_writel(*(const u32 *)from, to);
+			count -= 4;
+			to += 4;
+			from += 4;
+		} while (count >= 0);
+		count += 4;
+	}
+
+	if (count >= 2 && ((u64)to & 1) == ((u64)from & 1)) {
+		count -= 2;
+		do {
+			__raw_writew(*(const u16 *)from, to);
+			count -= 2;
+			to += 2;
+			from += 2;
+		} while (count >= 0);
+		count += 2;
+	}
+
+	while (count > 0) {
+		__raw_writeb(*(const u8 *) from, to);
+		count--;
+		to++;
+		from++;
+	}
+	mb();
+}
+
+EXPORT_SYMBOL(memcpy_toio);
+
+
+/*
+ * "memset" on IO memory space.
+ */
+void _memset_c_io(volatile void __iomem *to, unsigned long c, long count)
+{
+	/* Handle any initial odd byte */
+	if (count > 0 && ((u64)to & 1)) {
+		__raw_writeb(c, to);
+		to++;
+		count--;
+	}
+
+	/* Handle any initial odd halfword */
+	if (count >= 2 && ((u64)to & 2)) {
+		__raw_writew(c, to);
+		to += 2;
+		count -= 2;
+	}
+
+	/* Handle any initial odd word */
+	if (count >= 4 && ((u64)to & 4)) {
+		__raw_writel(c, to);
+		to += 4;
+		count -= 4;
+	}
+
+	/* Handle all full-sized quadwords: we're aligned
+	   (or have a small count) */
+	count -= 8;
+	if (count >= 0) {
+		do {
+			__raw_writeq(c, to);
+			to += 8;
+			count -= 8;
+		} while (count >= 0);
+	}
+	count += 8;
+
+	/* The tail is word-aligned if we still have count >= 4 */
+	if (count >= 4) {
+		__raw_writel(c, to);
+		to += 4;
+		count -= 4;
+	}
+
+	/* The tail is half-word aligned if we have count >= 2 */
+	if (count >= 2) {
+		__raw_writew(c, to);
+		to += 2;
+		count -= 2;
+	}
+
+	/* And finally, one last byte.. */
+	if (count) {
+		__raw_writeb(c, to);
+	}
+	mb();
+}
+
+EXPORT_SYMBOL(_memset_c_io);
+
+/* A version of memcpy used by the vga console routines to move data around
+   arbitrarily between screen and main memory.  */
+
+void
+scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
+{
+	const u16 __iomem *ios = (const u16 __iomem *) s;
+	u16 __iomem *iod = (u16 __iomem *) d;
+	int s_isio = __is_ioaddr(s);
+	int d_isio = __is_ioaddr(d);
+
+	if (s_isio) {
+		if (d_isio) {
+			/* FIXME: Should handle unaligned ops and
+			   operation widening.  */
+
+			count /= 2;
+			while (count--) {
+				u16 tmp = __raw_readw(ios++);
+				__raw_writew(tmp, iod++);
+			}
+		}
+		else
+			memcpy_fromio(d, ios, count);
+	} else {
+		if (d_isio)
+			memcpy_toio(iod, s, count);
+		else
+			memcpy(d, s, count);
+	}
+}
+
+EXPORT_SYMBOL(scr_memcpyw);
+
+void __iomem *ioport_map(unsigned long port, unsigned int size)
+{
+	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
+}
+
+void ioport_unmap(void __iomem *addr)
+{
+}
+
+EXPORT_SYMBOL(ioport_map);
+EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
new file mode 100644
index 0000000000..15f2effd6b
--- /dev/null
+++ b/arch/alpha/kernel/irq.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/irq.c
+ *
+ *	Copyright (C) 1995 Linus Torvalds
+ *
+ * This file contains the code used by various IRQ handling routines:
+ * asking for different IRQ's should be done through these routines
+ * instead of just grabbing them. Thus setups with different IRQ numbers
+ * shouldn't result in any weird surprises, and installing new handlers
+ * should be easier.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/profile.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <linux/uaccess.h>
+
+volatile unsigned long irq_err_count;
+DEFINE_PER_CPU(unsigned long, irq_pmi_count);
+
+void ack_bad_irq(unsigned int irq)
+{
+	irq_err_count++;
+	printk(KERN_CRIT "Unexpected IRQ trap at vector %u\n", irq);
+}
+
+#ifdef CONFIG_SMP 
+static char irq_user_affinity[NR_IRQS];
+
+int irq_select_affinity(unsigned int irq)
+{
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip;
+	static int last_cpu;
+	int cpu = last_cpu + 1;
+
+	if (!data)
+		return 1;
+	chip = irq_data_get_irq_chip(data);
+
+	if (!chip->irq_set_affinity || irq_user_affinity[irq])
+		return 1;
+
+	while (!cpu_possible(cpu) ||
+	       !cpumask_test_cpu(cpu, irq_default_affinity))
+		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
+	last_cpu = cpu;
+
+	irq_data_update_affinity(data, cpumask_of(cpu));
+	chip->irq_set_affinity(data, cpumask_of(cpu), false);
+	return 0;
+}
+#endif /* CONFIG_SMP */
+
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	int j;
+
+#ifdef CONFIG_SMP
+	seq_puts(p, "IPI: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10lu ", cpu_data[j].ipi_count);
+	seq_putc(p, '\n');
+#endif
+	seq_puts(p, "PMI: ");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10lu ", per_cpu(irq_pmi_count, j));
+	seq_puts(p, "          Performance Monitoring\n");
+	seq_printf(p, "ERR: %10lu\n", irq_err_count);
+	return 0;
+}
+
+/*
+ * handle_irq handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+
+#define MAX_ILLEGAL_IRQS 16
+
+void
+handle_irq(int irq)
+{	
+	/* 
+	 * We ack quickly, we don't want the irq controller
+	 * thinking we're snobs just because some other CPU has
+	 * disabled global interrupts (we have already done the
+	 * INT_ACK cycles, it's too late to try to pretend to the
+	 * controller that we aren't taking the interrupt).
+	 *
+	 * 0 return value means that this irq is already being
+	 * handled by some other CPU. (or is disabled)
+	 */
+	static unsigned int illegal_count=0;
+	struct irq_desc *desc = irq_to_desc(irq);
+	
+	if (!desc || ((unsigned) irq > ACTUAL_NR_IRQS &&
+	    illegal_count < MAX_ILLEGAL_IRQS)) {
+		irq_err_count++;
+		illegal_count++;
+		printk(KERN_CRIT "device_interrupt: invalid interrupt %d\n",
+		       irq);
+		return;
+	}
+
+	irq_enter();
+	generic_handle_irq_desc(desc);
+	irq_exit();
+}
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
new file mode 100644
index 0000000000..d17e44c99d
--- /dev/null
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Alpha specific irq code.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+
+#include <asm/machvec.h>
+#include <asm/dma.h>
+#include <asm/perf_event.h>
+#include <asm/mce.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+/* Hack minimum IPL during interrupt processing for broken hardware.  */
+#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
+int __min_ipl;
+EXPORT_SYMBOL(__min_ipl);
+#endif
+
+/*
+ * Performance counter hook.  A module can override this to
+ * do something useful.
+ */
+static void
+dummy_perf(unsigned long vector, struct pt_regs *regs)
+{
+	irq_err_count++;
+	printk(KERN_CRIT "Performance counter interrupt!\n");
+}
+
+void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf;
+EXPORT_SYMBOL(perf_irq);
+
+/*
+ * The main interrupt entry point.
+ */
+
+asmlinkage void 
+do_entInt(unsigned long type, unsigned long vector,
+	  unsigned long la_ptr, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+
+	/*
+	 * Disable interrupts during IRQ handling.
+	 * Note that there is no matching local_irq_enable() due to
+	 * severe problems with RTI at IPL0 and some MILO PALcode
+	 * (namely LX164).
+	 */
+	local_irq_disable();
+	switch (type) {
+	case 0:
+#ifdef CONFIG_SMP
+		handle_ipi(regs);
+		return;
+#else
+		irq_err_count++;
+		printk(KERN_CRIT "Interprocessor interrupt? "
+		       "You must be kidding!\n");
+#endif
+		break;
+	case 1:
+		old_regs = set_irq_regs(regs);
+		handle_irq(RTC_IRQ);
+		set_irq_regs(old_regs);
+		return;
+	case 2:
+		old_regs = set_irq_regs(regs);
+		alpha_mv.machine_check(vector, la_ptr);
+		set_irq_regs(old_regs);
+		return;
+	case 3:
+		old_regs = set_irq_regs(regs);
+		alpha_mv.device_interrupt(vector);
+		set_irq_regs(old_regs);
+		return;
+	case 4:
+		perf_irq(la_ptr, regs);
+		return;
+	default:
+		printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n",
+		       type, vector);
+	}
+	printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps);
+}
+
+void __init
+common_init_isa_dma(void)
+{
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(0, DMA1_CLR_MASK_REG);
+	outb(0, DMA2_CLR_MASK_REG);
+}
+
+void __init
+init_IRQ(void)
+{
+	/* Just in case the platform init_irq() causes interrupts/mchecks
+	   (as is the case with RAWHIDE, at least).  */
+	wrent(entInt, 0);
+
+	alpha_mv.init_irq();
+}
+
+/*
+ * machine error checks
+ */
+#define MCHK_K_TPERR           0x0080
+#define MCHK_K_TCPERR          0x0082
+#define MCHK_K_HERR            0x0084
+#define MCHK_K_ECC_C           0x0086
+#define MCHK_K_ECC_NC          0x0088
+#define MCHK_K_OS_BUGCHECK     0x008A
+#define MCHK_K_PAL_BUGCHECK    0x0090
+
+#ifndef CONFIG_SMP
+struct mcheck_info __mcheck_info;
+#endif
+
+void
+process_mcheck_info(unsigned long vector, unsigned long la_ptr,
+		    const char *machine, int expected)
+{
+	struct el_common *mchk_header;
+	const char *reason;
+
+	/*
+	 * See if the machine check is due to a badaddr() and if so,
+	 * ignore it.
+	 */
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		printk(KERN_CRIT "%s machine check %s\n", machine,
+		       expected ? "expected." : "NOT expected!!!");
+	}
+#endif
+
+	if (expected) {
+		int cpu = smp_processor_id();
+		mcheck_expected(cpu) = 0;
+		mcheck_taken(cpu) = 1;
+		return;
+	}
+
+	mchk_header = (struct el_common *)la_ptr;
+
+	printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n",
+	       machine, vector, get_irq_regs()->pc, mchk_header->code);
+
+	switch (mchk_header->code) {
+	/* Machine check reasons.  Defined according to PALcode sources.  */
+	case 0x80: reason = "tag parity error"; break;
+	case 0x82: reason = "tag control parity error"; break;
+	case 0x84: reason = "generic hard error"; break;
+	case 0x86: reason = "correctable ECC error"; break;
+	case 0x88: reason = "uncorrectable ECC error"; break;
+	case 0x8A: reason = "OS-specific PAL bugcheck"; break;
+	case 0x90: reason = "callsys in kernel mode"; break;
+	case 0x96: reason = "i-cache read retryable error"; break;
+	case 0x98: reason = "processor detected hard error"; break;
+	
+	/* System specific (these are for Alcor, at least): */
+	case 0x202: reason = "system detected hard error"; break;
+	case 0x203: reason = "system detected uncorrectable ECC error"; break;
+	case 0x204: reason = "SIO SERR occurred on PCI bus"; break;
+	case 0x205: reason = "parity error detected by core logic"; break;
+	case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break;
+	case 0x207: reason = "non-existent memory error"; break;
+	case 0x208: reason = "MCHK_K_DCSR"; break;
+	case 0x209: reason = "PCI SERR detected"; break;
+	case 0x20b: reason = "PCI data parity error detected"; break;
+	case 0x20d: reason = "PCI address parity error detected"; break;
+	case 0x20f: reason = "PCI master abort error"; break;
+	case 0x211: reason = "PCI target abort error"; break;
+	case 0x213: reason = "scatter/gather PTE invalid error"; break;
+	case 0x215: reason = "flash ROM write error"; break;
+	case 0x217: reason = "IOA timeout detected"; break;
+	case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break;
+	case 0x21b: reason = "EISA fail-safe timer timeout"; break;
+	case 0x21d: reason = "EISA bus time-out"; break;
+	case 0x21f: reason = "EISA software generated NMI"; break;
+	case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break;
+	default: reason = "unknown"; break;
+	}
+
+	printk(KERN_CRIT "machine check type: %s%s\n",
+	       reason, mchk_header->retry ? " (retryable)" : "");
+
+	dik_show_regs(get_irq_regs(), NULL);
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		/* Dump the logout area to give all info.  */
+		unsigned long *ptr = (unsigned long *)la_ptr;
+		long i;
+		for (i = 0; i < mchk_header->size / sizeof(long); i += 2) {
+			printk(KERN_CRIT "   +%8lx %016lx %016lx\n",
+			       i*sizeof(long), ptr[i], ptr[i+1]);
+		}
+	}
+#endif /* CONFIG_VERBOSE_MCHECK */
+}
+
+/*
+ * The special RTC interrupt type.  The interrupt itself was
+ * processed by PALcode, and comes in via entInt vector 1.
+ */
+void __init
+init_rtc_irq(irq_handler_t handler)
+{
+	irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
+				      handle_percpu_irq, "RTC");
+	if (!handler)
+		handler = rtc_timer_interrupt;
+	if (request_irq(RTC_IRQ, handler, 0, "timer", NULL))
+		pr_err("Failed to register timer interrupt\n");
+}
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
new file mode 100644
index 0000000000..1dcf0d9038
--- /dev/null
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *      linux/arch/alpha/kernel/irq_i8259.c
+ *
+ * This is the 'legacy' 8259A Programmable Interrupt Controller,
+ * present in the majority of PC/AT boxes.
+ *
+ * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c.
+ */
+
+#include <linux/init.h>
+#include <linux/cache.h>
+#include <linux/sched.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+
+/* Note mask bit is true for DISABLED irqs.  */
+static unsigned int cached_irq_mask = 0xffff;
+static DEFINE_SPINLOCK(i8259_irq_lock);
+
+static inline void
+i8259_update_irq_hw(unsigned int irq, unsigned long mask)
+{
+	int port = 0x21;
+	if (irq & 8) mask >>= 8;
+	if (irq & 8) port = 0xA1;
+	outb(mask, port);
+}
+
+inline void
+i8259a_enable_irq(struct irq_data *d)
+{
+	spin_lock(&i8259_irq_lock);
+	i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
+	spin_unlock(&i8259_irq_lock);
+}
+
+static inline void
+__i8259a_disable_irq(unsigned int irq)
+{
+	i8259_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
+}
+
+void
+i8259a_disable_irq(struct irq_data *d)
+{
+	spin_lock(&i8259_irq_lock);
+	__i8259a_disable_irq(d->irq);
+	spin_unlock(&i8259_irq_lock);
+}
+
+void
+i8259a_mask_and_ack_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	spin_lock(&i8259_irq_lock);
+	__i8259a_disable_irq(irq);
+
+	/* Ack the interrupt making it the lowest priority.  */
+	if (irq >= 8) {
+		outb(0xE0 | (irq - 8), 0xa0);   /* ack the slave */
+		irq = 2;
+	}
+	outb(0xE0 | irq, 0x20);			/* ack the master */
+	spin_unlock(&i8259_irq_lock);
+}
+
+struct irq_chip i8259a_irq_type = {
+	.name		= "XT-PIC",
+	.irq_unmask	= i8259a_enable_irq,
+	.irq_mask	= i8259a_disable_irq,
+	.irq_mask_ack	= i8259a_mask_and_ack_irq,
+};
+
+void __init
+init_i8259a_irqs(void)
+{
+	long i;
+
+	outb(0xff, 0x21);	/* mask all of 8259A-1 */
+	outb(0xff, 0xA1);	/* mask all of 8259A-2 */
+
+	for (i = 0; i < 16; i++) {
+		irq_set_chip_and_handler(i, &i8259a_irq_type, handle_level_irq);
+	}
+
+	if (request_irq(2, no_action, 0, "cascade", NULL))
+		pr_err("Failed to request irq 2 (cascade)\n");
+}
+
+
+#if defined(CONFIG_ALPHA_GENERIC)
+# define IACK_SC	alpha_mv.iack_sc
+#elif defined(CONFIG_ALPHA_APECS)
+# define IACK_SC	APECS_IACK_SC
+#elif defined(CONFIG_ALPHA_LCA)
+# define IACK_SC	LCA_IACK_SC
+#elif defined(CONFIG_ALPHA_CIA)
+# define IACK_SC	CIA_IACK_SC
+#elif defined(CONFIG_ALPHA_PYXIS)
+# define IACK_SC	PYXIS_IACK_SC
+#elif defined(CONFIG_ALPHA_TITAN)
+# define IACK_SC	TITAN_IACK_SC
+#elif defined(CONFIG_ALPHA_TSUNAMI)
+# define IACK_SC	TSUNAMI_IACK_SC
+#elif defined(CONFIG_ALPHA_IRONGATE)
+# define IACK_SC        IRONGATE_IACK_SC
+#endif
+/* Note that CONFIG_ALPHA_POLARIS is intentionally left out here, since
+   sys_rx164 wants to use isa_no_iack_sc_device_interrupt for some reason.  */
+
+#if defined(IACK_SC)
+void
+isa_device_interrupt(unsigned long vector)
+{
+	/*
+	 * Generate a PCI interrupt acknowledge cycle.  The PIC will
+	 * respond with the interrupt vector of the highest priority
+	 * interrupt that is pending.  The PALcode sets up the
+	 * interrupts vectors such that irq level L generates vector L.
+	 */
+	int j = *(vuip) IACK_SC;
+	j &= 0xff;
+	handle_irq(j);
+}
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || !defined(IACK_SC)
+void
+isa_no_iack_sc_device_interrupt(unsigned long vector)
+{
+	unsigned long pic;
+
+	/*
+	 * It seems to me that the probability of two or more *device*
+	 * interrupts occurring at almost exactly the same time is
+	 * pretty low.  So why pay the price of checking for
+	 * additional interrupts here if the common case can be
+	 * handled so much easier?
+	 */
+	/* 
+	 *  The first read of gives you *all* interrupting lines.
+	 *  Therefore, read the mask register and and out those lines
+	 *  not enabled.  Note that some documentation has 21 and a1 
+	 *  write only.  This is not true.
+	 */
+	pic = inb(0x20) | (inb(0xA0) << 8);	/* read isr */
+	pic &= 0xFFFB;				/* mask out cascade & hibits */
+
+	while (pic) {
+		int j = ffz(~pic);
+		pic &= pic - 1;
+		handle_irq(j);
+	}
+}
+#endif
diff --git a/arch/alpha/kernel/irq_impl.h b/arch/alpha/kernel/irq_impl.h
new file mode 100644
index 0000000000..fbf21892e6
--- /dev/null
+++ b/arch/alpha/kernel/irq_impl.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	linux/arch/alpha/kernel/irq_impl.h
+ *
+ *	Copyright (C) 1995 Linus Torvalds
+ *	Copyright (C) 1998, 2000 Richard Henderson
+ *
+ * This file contains declarations and inline functions for interfacing
+ * with the IRQ handling routines in irq.c.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+
+
+#define RTC_IRQ    8
+
+extern void isa_device_interrupt(unsigned long);
+extern void isa_no_iack_sc_device_interrupt(unsigned long);
+extern void srm_device_interrupt(unsigned long);
+extern void pyxis_device_interrupt(unsigned long);
+
+extern void init_srm_irqs(long, unsigned long);
+extern void init_pyxis_irqs(unsigned long);
+extern void init_rtc_irq(irq_handler_t  handler);
+
+extern void common_init_isa_dma(void);
+
+extern void i8259a_enable_irq(struct irq_data *d);
+extern void i8259a_disable_irq(struct irq_data *d);
+extern void i8259a_mask_and_ack_irq(struct irq_data *d);
+extern struct irq_chip i8259a_irq_type;
+extern void init_i8259a_irqs(void);
+
+extern void handle_irq(int irq);
diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c
new file mode 100644
index 0000000000..27070b5bd3
--- /dev/null
+++ b/arch/alpha/kernel/irq_pyxis.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/irq_pyxis.c
+ *
+ * Based on code written by David A Rusling (david.rusling@reo.mts.dec.com).
+ *
+ * IRQ Code common to all PYXIS core logic chips.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/core_cia.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+
+/* Note mask bit is true for ENABLED irqs.  */
+static unsigned long cached_irq_mask;
+
+static inline void
+pyxis_update_irq_hw(unsigned long mask)
+{
+	*(vulp)PYXIS_INT_MASK = mask;
+	mb();
+	*(vulp)PYXIS_INT_MASK;
+}
+
+static inline void
+pyxis_enable_irq(struct irq_data *d)
+{
+	pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
+}
+
+static void
+pyxis_disable_irq(struct irq_data *d)
+{
+	pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
+}
+
+static void
+pyxis_mask_and_ack_irq(struct irq_data *d)
+{
+	unsigned long bit = 1UL << (d->irq - 16);
+	unsigned long mask = cached_irq_mask &= ~bit;
+
+	/* Disable the interrupt.  */
+	*(vulp)PYXIS_INT_MASK = mask;
+	wmb();
+	/* Ack PYXIS PCI interrupt.  */
+	*(vulp)PYXIS_INT_REQ = bit;
+	mb();
+	/* Re-read to force both writes.  */
+	*(vulp)PYXIS_INT_MASK;
+}
+
+static struct irq_chip pyxis_irq_type = {
+	.name		= "PYXIS",
+	.irq_mask_ack	= pyxis_mask_and_ack_irq,
+	.irq_mask	= pyxis_disable_irq,
+	.irq_unmask	= pyxis_enable_irq,
+};
+
+void 
+pyxis_device_interrupt(unsigned long vector)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary register of PYXIS */
+	pld = *(vulp)PYXIS_INT_REQ;
+	pld &= cached_irq_mask;
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1; /* clear least bit set */
+		if (i == 7)
+			isa_device_interrupt(vector);
+		else
+			handle_irq(16+i);
+	}
+}
+
+void __init
+init_pyxis_irqs(unsigned long ignore_mask)
+{
+	long i;
+
+	*(vulp)PYXIS_INT_MASK = 0;		/* disable all */
+	*(vulp)PYXIS_INT_REQ  = -1;		/* flush all */
+	mb();
+
+	/* Send -INTA pulses to clear any pending interrupts ...*/
+	*(vuip) CIA_IACK_SC;
+
+	for (i = 16; i < 48; ++i) {
+		if ((ignore_mask >> i) & 1)
+			continue;
+		irq_set_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	if (request_irq(16 + 7, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
+}
diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c
new file mode 100644
index 0000000000..bfacd6a061
--- /dev/null
+++ b/arch/alpha/kernel/irq_srm.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Handle interrupts from the SRM, assuming no additional weirdness.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/irq.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+
+/*
+ * Is the palcode SMP safe? In other words: can we call cserve_ena/dis
+ * at the same time in multiple CPUs? To be safe I added a spinlock
+ * but it can be removed trivially if the palcode is robust against smp.
+ */
+DEFINE_SPINLOCK(srm_irq_lock);
+
+static inline void
+srm_enable_irq(struct irq_data *d)
+{
+	spin_lock(&srm_irq_lock);
+	cserve_ena(d->irq - 16);
+	spin_unlock(&srm_irq_lock);
+}
+
+static void
+srm_disable_irq(struct irq_data *d)
+{
+	spin_lock(&srm_irq_lock);
+	cserve_dis(d->irq - 16);
+	spin_unlock(&srm_irq_lock);
+}
+
+/* Handle interrupts from the SRM, assuming no additional weirdness.  */
+static struct irq_chip srm_irq_type = {
+	.name		= "SRM",
+	.irq_unmask	= srm_enable_irq,
+	.irq_mask	= srm_disable_irq,
+	.irq_mask_ack	= srm_disable_irq,
+};
+
+void __init
+init_srm_irqs(long max, unsigned long ignore_mask)
+{
+	long i;
+
+	if (NR_IRQS <= 16)
+		return;
+	for (i = 16; i < max; ++i) {
+		if (i < 64 && ((ignore_mask >> i) & 1))
+			continue;
+		irq_set_chip_and_handler(i, &srm_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+}
+
+void 
+srm_device_interrupt(unsigned long vector)
+{
+	int irq = (vector - 0x800) >> 4;
+	handle_irq(irq);
+}
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
new file mode 100644
index 0000000000..c2ebcb39e5
--- /dev/null
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	linux/arch/alpha/kernel/machvec_impl.h
+ *
+ *	Copyright (C) 1997, 1998  Richard Henderson
+ *
+ * This file has goodies to help simplify instantiation of machine vectors.
+ */
+
+/* Whee.  These systems don't have an HAE:
+       IRONGATE, MARVEL, POLARIS, TSUNAMI, TITAN, WILDFIRE
+   Fix things up for the GENERIC kernel by defining the HAE address
+   to be that of the cache. Now we can read and write it as we like.  ;-)  */
+#define IRONGATE_HAE_ADDRESS	(&alpha_mv.hae_cache)
+#define MARVEL_HAE_ADDRESS	(&alpha_mv.hae_cache)
+#define POLARIS_HAE_ADDRESS	(&alpha_mv.hae_cache)
+#define TSUNAMI_HAE_ADDRESS	(&alpha_mv.hae_cache)
+#define TITAN_HAE_ADDRESS	(&alpha_mv.hae_cache)
+#define WILDFIRE_HAE_ADDRESS	(&alpha_mv.hae_cache)
+
+#ifdef CIA_ONE_HAE_WINDOW
+#define CIA_HAE_ADDRESS		(&alpha_mv.hae_cache)
+#endif
+#ifdef MCPCIA_ONE_HAE_WINDOW
+#define MCPCIA_HAE_ADDRESS	(&alpha_mv.hae_cache)
+#endif
+#ifdef T2_ONE_HAE_WINDOW
+#define T2_HAE_ADDRESS		(&alpha_mv.hae_cache)
+#endif
+
+/* Only a few systems don't define IACK_SC, handling all interrupts through
+   the SRM console.  But splitting out that one case from IO() below
+   seems like such a pain.  Define this to get things to compile.  */
+#define JENSEN_IACK_SC		1
+#define T2_IACK_SC		1
+#define WILDFIRE_IACK_SC	1 /* FIXME */
+
+/*
+ * Some helpful macros for filling in the blanks.
+ */
+
+#define CAT1(x,y)  x##y
+#define CAT(x,y)   CAT1(x,y)
+
+#define DO_DEFAULT_RTC			.rtc_port = 0x70
+
+#define DO_EV4_MMU							\
+	.max_asn =			EV4_MAX_ASN,			\
+	.mv_switch_mm =			ev4_switch_mm,			\
+	.mv_activate_mm =		ev4_activate_mm,		\
+	.mv_flush_tlb_current =		ev4_flush_tlb_current,		\
+	.mv_flush_tlb_current_page =	ev4_flush_tlb_current_page
+
+#define DO_EV5_MMU							\
+	.max_asn =			EV5_MAX_ASN,			\
+	.mv_switch_mm =			ev5_switch_mm,			\
+	.mv_activate_mm =		ev5_activate_mm,		\
+	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
+	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+
+#define DO_EV6_MMU							\
+	.max_asn =			EV6_MAX_ASN,			\
+	.mv_switch_mm =			ev5_switch_mm,			\
+	.mv_activate_mm =		ev5_activate_mm,		\
+	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
+	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+
+#define DO_EV7_MMU							\
+	.max_asn =			EV6_MAX_ASN,			\
+	.mv_switch_mm =			ev5_switch_mm,			\
+	.mv_activate_mm =		ev5_activate_mm,		\
+	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
+	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+
+#define IO_LITE(UP,low)							\
+	.hae_register =		(unsigned long *) CAT(UP,_HAE_ADDRESS),	\
+	.iack_sc =		CAT(UP,_IACK_SC),			\
+	.mv_ioread8 =		CAT(low,_ioread8),			\
+	.mv_ioread16 =		CAT(low,_ioread16),			\
+	.mv_ioread32 =		CAT(low,_ioread32),			\
+	.mv_ioread64 =		CAT(low,_ioread64),			\
+	.mv_iowrite8 =		CAT(low,_iowrite8),			\
+	.mv_iowrite16 =		CAT(low,_iowrite16),			\
+	.mv_iowrite32 =		CAT(low,_iowrite32),			\
+	.mv_iowrite64 =		CAT(low,_iowrite64),			\
+	.mv_readb =		CAT(low,_readb),			\
+	.mv_readw =		CAT(low,_readw),			\
+	.mv_readl =		CAT(low,_readl),			\
+	.mv_readq =		CAT(low,_readq),			\
+	.mv_writeb =		CAT(low,_writeb),			\
+	.mv_writew =		CAT(low,_writew),			\
+	.mv_writel =		CAT(low,_writel),			\
+	.mv_writeq =		CAT(low,_writeq),			\
+	.mv_ioportmap =		CAT(low,_ioportmap),			\
+	.mv_ioremap =		CAT(low,_ioremap),			\
+	.mv_iounmap =		CAT(low,_iounmap),			\
+	.mv_is_ioaddr =		CAT(low,_is_ioaddr),			\
+	.mv_is_mmio =		CAT(low,_is_mmio)			\
+
+#define IO(UP,low)							\
+	IO_LITE(UP,low),						\
+	.pci_ops =		&CAT(low,_pci_ops),			\
+	.mv_pci_tbi =		CAT(low,_pci_tbi)
+
+#define DO_APECS_IO	IO(APECS,apecs)
+#define DO_CIA_IO	IO(CIA,cia)
+#define DO_IRONGATE_IO	IO(IRONGATE,irongate)
+#define DO_LCA_IO	IO(LCA,lca)
+#define DO_MARVEL_IO	IO(MARVEL,marvel)
+#define DO_MCPCIA_IO	IO(MCPCIA,mcpcia)
+#define DO_POLARIS_IO	IO(POLARIS,polaris)
+#define DO_T2_IO	IO(T2,t2)
+#define DO_TSUNAMI_IO	IO(TSUNAMI,tsunami)
+#define DO_TITAN_IO	IO(TITAN,titan)
+#define DO_WILDFIRE_IO	IO(WILDFIRE,wildfire)
+
+#define DO_PYXIS_IO	IO_LITE(CIA,cia_bwx), \
+			.pci_ops = &cia_pci_ops, \
+			.mv_pci_tbi = cia_pci_tbi
+
+/*
+ * In a GENERIC kernel, we have lots of these vectors floating about,
+ * all but one of which we want to go away.  In a non-GENERIC kernel,
+ * we want only one, ever.
+ *
+ * Accomplish this in the GENERIC kernel by putting all of the vectors
+ * in the .init.data section where they'll go away.  We'll copy the
+ * one we want to the real alpha_mv vector in setup_arch.
+ *
+ * Accomplish this in a non-GENERIC kernel by ifdef'ing out all but
+ * one of the vectors, which will not reside in .init.data.  We then
+ * alias this one vector to alpha_mv, so no copy is needed.
+ *
+ * Upshot: set __initdata to nothing for non-GENERIC kernels.
+ */
+
+#ifdef CONFIG_ALPHA_GENERIC
+#define __initmv __initdata
+#define ALIAS_MV(x)
+#else
+#define __initmv __refdata
+
+/* GCC actually has a syntax for defining aliases, but is under some
+   delusion that you shouldn't be able to declare it extern somewhere
+   else beforehand.  Fine.  We'll do it ourselves.  */
+#if 0
+#define ALIAS_MV(system) \
+  struct alpha_machine_vector alpha_mv __attribute__((alias(#system "_mv"))); \
+  EXPORT_SYMBOL(alpha_mv);
+#else
+#define ALIAS_MV(system) \
+  asm(".global alpha_mv\nalpha_mv = " #system "_mv"); \
+  EXPORT_SYMBOL(alpha_mv);
+#endif
+#endif /* GENERIC */
diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c
new file mode 100644
index 0000000000..cbefa5a773
--- /dev/null
+++ b/arch/alpha/kernel/module.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*  Kernel module help for Alpha.
+    Copyright (C) 2002 Richard Henderson.
+
+*/
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+/* Allocate the GOT at the end of the core sections.  */
+
+struct got_entry {
+	struct got_entry *next;
+	Elf64_Sxword r_addend;
+	int got_offset;
+};
+
+static inline void
+process_reloc_for_got(Elf64_Rela *rela,
+		      struct got_entry *chains, Elf64_Xword *poffset)
+{
+	unsigned long r_sym = ELF64_R_SYM (rela->r_info);
+	unsigned long r_type = ELF64_R_TYPE (rela->r_info);
+	Elf64_Sxword r_addend = rela->r_addend;
+	struct got_entry *g;
+
+	if (r_type != R_ALPHA_LITERAL)
+		return;
+
+	for (g = chains + r_sym; g ; g = g->next)
+		if (g->r_addend == r_addend) {
+			if (g->got_offset == 0) {
+				g->got_offset = *poffset;
+				*poffset += 8;
+			}
+			goto found_entry;
+		}
+
+	g = kmalloc (sizeof (*g), GFP_KERNEL);
+	g->next = chains[r_sym].next;
+	g->r_addend = r_addend;
+	g->got_offset = *poffset;
+	*poffset += 8;
+	chains[r_sym].next = g;
+
+ found_entry:
+	/* Trick: most of the ELF64_R_TYPE field is unused.  There are
+	   42 valid relocation types, and a 32-bit field.  Co-opt the
+	   bits above 256 to store the got offset for this reloc.  */
+	rela->r_info |= g->got_offset << 8;
+}
+
+int
+module_frob_arch_sections(Elf64_Ehdr *hdr, Elf64_Shdr *sechdrs,
+			  char *secstrings, struct module *me)
+{
+	struct got_entry *chains;
+	Elf64_Rela *rela;
+	Elf64_Shdr *esechdrs, *symtab, *s, *got;
+	unsigned long nsyms, nrela, i;
+
+	esechdrs = sechdrs + hdr->e_shnum;
+	symtab = got = NULL;
+
+	/* Find out how large the symbol table is.  Allocate one got_entry
+	   head per symbol.  Normally this will be enough, but not always.
+	   We'll chain different offsets for the symbol down each head.  */
+	for (s = sechdrs; s < esechdrs; ++s)
+		if (s->sh_type == SHT_SYMTAB)
+			symtab = s;
+		else if (!strcmp(".got", secstrings + s->sh_name)) {
+			got = s;
+			me->arch.gotsecindex = s - sechdrs;
+		}
+
+	if (!symtab) {
+		printk(KERN_ERR "module %s: no symbol table\n", me->name);
+		return -ENOEXEC;
+	}
+	if (!got) {
+		printk(KERN_ERR "module %s: no got section\n", me->name);
+		return -ENOEXEC;
+	}
+
+	nsyms = symtab->sh_size / sizeof(Elf64_Sym);
+	chains = kcalloc(nsyms, sizeof(struct got_entry), GFP_KERNEL);
+	if (!chains) {
+		printk(KERN_ERR
+		       "module %s: no memory for symbol chain buffer\n",
+		       me->name);
+		return -ENOMEM;
+	}
+
+	got->sh_size = 0;
+	got->sh_addralign = 8;
+	got->sh_type = SHT_NOBITS;
+
+	/* Examine all LITERAL relocations to find out what GOT entries
+	   are required.  This sizes the GOT section as well.  */
+	for (s = sechdrs; s < esechdrs; ++s)
+		if (s->sh_type == SHT_RELA) {
+			nrela = s->sh_size / sizeof(Elf64_Rela);
+			rela = (void *)hdr + s->sh_offset;
+			for (i = 0; i < nrela; ++i)
+				process_reloc_for_got(rela+i, chains,
+						      &got->sh_size);
+		}
+
+	/* Free the memory we allocated.  */
+	for (i = 0; i < nsyms; ++i) {
+		struct got_entry *g, *n;
+		for (g = chains[i].next; g ; g = n) {
+			n = g->next;
+			kfree(g);
+		}
+	}
+	kfree(chains);
+
+	return 0;
+}
+
+int
+apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
+		   unsigned int symindex, unsigned int relsec,
+		   struct module *me)
+{
+	Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+	unsigned long i, n = sechdrs[relsec].sh_size / sizeof(*rela);
+	Elf64_Sym *symtab, *sym;
+	void *base, *location;
+	unsigned long got, gp;
+
+	DEBUGP("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+
+	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
+	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
+
+	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
+
+	for (i = 0; i < n; i++) {
+		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
+		unsigned long r_type = ELF64_R_TYPE (rela[i].r_info);
+		unsigned long r_got_offset = r_type >> 8;
+		unsigned long value, hi, lo;
+		r_type &= 0xff;
+
+		/* This is where to make the change.  */
+		location = base + rela[i].r_offset;
+
+		/* This is the symbol it is referring to.  Note that all
+		   unresolved symbols have been resolved.  */
+		sym = symtab + r_sym;
+		value = sym->st_value + rela[i].r_addend;
+
+		switch (r_type) {
+		case R_ALPHA_NONE:
+			break;
+		case R_ALPHA_REFLONG:
+			*(u32 *)location = value;
+			break;
+		case R_ALPHA_REFQUAD:
+			/* BUG() can produce misaligned relocations. */
+			((u32 *)location)[0] = value;
+			((u32 *)location)[1] = value >> 32;
+			break;
+		case R_ALPHA_GPREL32:
+			value -= gp;
+			if ((int)value != value)
+				goto reloc_overflow;
+			*(u32 *)location = value;
+			break;
+		case R_ALPHA_LITERAL:
+			hi = got + r_got_offset;
+			lo = hi - gp;
+			if ((short)lo != lo)
+				goto reloc_overflow;
+			*(u16 *)location = lo;
+			*(u64 *)hi = value;
+			break;
+		case R_ALPHA_LITUSE:
+			break;
+		case R_ALPHA_GPDISP:
+			value = gp - (u64)location;
+			lo = (short)value;
+			hi = (int)(value - lo);
+			if (hi + lo != value)
+				goto reloc_overflow;
+			*(u16 *)location = hi >> 16;
+			*(u16 *)(location + rela[i].r_addend) = lo;
+			break;
+		case R_ALPHA_BRSGP:
+			/* BRSGP is only allowed to bind to local symbols.
+			   If the section is undef, this means that the
+			   value was resolved from somewhere else.  */
+			if (sym->st_shndx == SHN_UNDEF)
+				goto reloc_overflow;
+			if ((sym->st_other & STO_ALPHA_STD_GPLOAD) ==
+			    STO_ALPHA_STD_GPLOAD)
+				/* Omit the prologue. */
+				value += 8;
+			fallthrough;
+		case R_ALPHA_BRADDR:
+			value -= (u64)location + 4;
+			if (value & 3)
+				goto reloc_overflow;
+			value = (long)value >> 2;
+			if (value + (1<<21) >= 1<<22)
+				goto reloc_overflow;
+			value &= 0x1fffff;
+			value |= *(u32 *)location & ~0x1fffff;
+			*(u32 *)location = value;
+			break;
+		case R_ALPHA_HINT:
+			break;
+		case R_ALPHA_SREL32:
+			value -= (u64)location;
+			if ((int)value != value)
+				goto reloc_overflow;
+			*(u32 *)location = value;
+			break;
+		case R_ALPHA_SREL64:
+			value -= (u64)location;
+			*(u64 *)location = value;
+			break;
+		case R_ALPHA_GPRELHIGH:
+			value = (long)(value - gp + 0x8000) >> 16;
+			if ((short) value != value)
+				goto reloc_overflow;
+			*(u16 *)location = value;
+			break;
+		case R_ALPHA_GPRELLOW:
+			value -= gp;
+			*(u16 *)location = value;
+			break;
+		case R_ALPHA_GPREL16:
+			value -= gp;
+			if ((short) value != value)
+				goto reloc_overflow;
+			*(u16 *)location = value;
+			break;
+		default:
+			printk(KERN_ERR "module %s: Unknown relocation: %lu\n",
+			       me->name, r_type);
+			return -ENOEXEC;
+		reloc_overflow:
+			if (ELF64_ST_TYPE (sym->st_info) == STT_SECTION)
+			  printk(KERN_ERR
+			         "module %s: Relocation (type %lu) overflow vs section %d\n",
+			         me->name, r_type, sym->st_shndx);
+			else
+			  printk(KERN_ERR
+			         "module %s: Relocation (type %lu) overflow vs %s\n",
+			         me->name, r_type, strtab + sym->st_name);
+			return -ENOEXEC;
+		}
+	}
+
+	return 0;
+}
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
new file mode 100644
index 0000000000..5db88b6274
--- /dev/null
+++ b/arch/alpha/kernel/osf_sys.c
@@ -0,0 +1,1326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/osf_sys.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ */
+
+/*
+ * This file handles some of the stranger OSF/1 system call interfaces.
+ * Some of the system calls expect a non-C calling standard, others have
+ * special parameter blocks..
+ */
+
+#include <linux/errno.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/mm.h>
+#include <linux/sched/task_stack.h>
+#include <linux/sched/cputime.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/syscalls.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/utsname.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/major.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/shm.h>
+#include <linux/poll.h>
+#include <linux/file.h>
+#include <linux/types.h>
+#include <linux/ipc.h>
+#include <linux/namei.h>
+#include <linux/mount.h>
+#include <linux/uio.h>
+#include <linux/vfs.h>
+#include <linux/rcupdate.h>
+#include <linux/slab.h>
+
+#include <asm/fpu.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/sysinfo.h>
+#include <asm/thread_info.h>
+#include <asm/hwrpb.h>
+#include <asm/processor.h>
+
+/*
+ * Brk needs to return an error.  Still support Linux's brk(0) query idiom,
+ * which OSF programs just shouldn't be doing.  We're still not quite
+ * identical to OSF as we don't return 0 on success, but doing otherwise
+ * would require changes to libc.  Hopefully this is good enough.
+ */
+SYSCALL_DEFINE1(osf_brk, unsigned long, brk)
+{
+	unsigned long retval = sys_brk(brk);
+	if (brk && brk != retval)
+		retval = -ENOMEM;
+	return retval;
+}
+ 
+/*
+ * This is pure guess-work..
+ */
+SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
+		unsigned long, text_len, unsigned long, bss_start,
+		unsigned long, bss_len)
+{
+	struct mm_struct *mm;
+
+	mm = current->mm;
+	mm->end_code = bss_start + bss_len;
+	mm->start_brk = bss_start + bss_len;
+	mm->brk = bss_start + bss_len;
+#if 0
+	printk("set_program_attributes(%lx %lx %lx %lx)\n",
+		text_start, text_len, bss_start, bss_len);
+#endif
+	return 0;
+}
+
+/*
+ * OSF/1 directory handling functions...
+ *
+ * The "getdents()" interface is much more sane: the "basep" stuff is
+ * braindamage (it can't really handle filesystems where the directory
+ * offset differences aren't the same as "d_reclen").
+ */
+#define NAME_OFFSET	offsetof (struct osf_dirent, d_name)
+
+struct osf_dirent {
+	unsigned int d_ino;
+	unsigned short d_reclen;
+	unsigned short d_namlen;
+	char d_name[];
+};
+
+struct osf_dirent_callback {
+	struct dir_context ctx;
+	struct osf_dirent __user *dirent;
+	long __user *basep;
+	unsigned int count;
+	int error;
+};
+
+static bool
+osf_filldir(struct dir_context *ctx, const char *name, int namlen,
+	    loff_t offset, u64 ino, unsigned int d_type)
+{
+	struct osf_dirent __user *dirent;
+	struct osf_dirent_callback *buf =
+		container_of(ctx, struct osf_dirent_callback, ctx);
+	unsigned int reclen = ALIGN(NAME_OFFSET + namlen + 1, sizeof(u32));
+	unsigned int d_ino;
+
+	buf->error = -EINVAL;	/* only used if we fail */
+	if (reclen > buf->count)
+		return false;
+	d_ino = ino;
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
+		return false;
+	}
+	if (buf->basep) {
+		if (put_user(offset, buf->basep))
+			goto Efault;
+		buf->basep = NULL;
+	}
+	dirent = buf->dirent;
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
+	    put_user(0, dirent->d_name + namlen))
+		goto Efault;
+	dirent = (void __user *)dirent + reclen;
+	buf->dirent = dirent;
+	buf->count -= reclen;
+	return true;
+Efault:
+	buf->error = -EFAULT;
+	return false;
+}
+
+SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
+		struct osf_dirent __user *, dirent, unsigned int, count,
+		long __user *, basep)
+{
+	int error;
+	struct fd arg = fdget_pos(fd);
+	struct osf_dirent_callback buf = {
+		.ctx.actor = osf_filldir,
+		.dirent = dirent,
+		.basep = basep,
+		.count = count
+	};
+
+	if (!arg.file)
+		return -EBADF;
+
+	error = iterate_dir(arg.file, &buf.ctx);
+	if (error >= 0)
+		error = buf.error;
+	if (count != buf.count)
+		error = count - buf.count;
+
+	fdput_pos(arg);
+	return error;
+}
+
+#undef NAME_OFFSET
+
+SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags, unsigned long, fd,
+		unsigned long, off)
+{
+	unsigned long ret = -EINVAL;
+
+#if 0
+	if (flags & (_MAP_HASSEMAPHORE | _MAP_INHERIT | _MAP_UNALIGNED))
+		printk("%s: unimplemented OSF mmap flags %04lx\n", 
+			current->comm, flags);
+#endif
+	if ((off + PAGE_ALIGN(len)) < off)
+		goto out;
+	if (off & ~PAGE_MASK)
+		goto out;
+	ret = ksys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
+ out:
+	return ret;
+}
+
+struct osf_stat {
+	int		st_dev;
+	int		st_pad1;
+	unsigned	st_mode;
+	unsigned short	st_nlink;
+	short		st_nlink_reserved;
+	unsigned	st_uid;
+	unsigned	st_gid;
+	int		st_rdev;
+	int		st_ldev;
+	long		st_size;
+	int		st_pad2;
+	int		st_uatime;
+	int		st_pad3;
+	int		st_umtime;
+	int		st_pad4;
+	int		st_uctime;
+	int		st_pad5;
+	int		st_pad6;
+	unsigned	st_flags;
+	unsigned	st_gen;
+	long		st_spare[4];
+	unsigned	st_ino;
+	int		st_ino_reserved;
+	int		st_atime;
+	int		st_atime_reserved;
+	int		st_mtime;
+	int		st_mtime_reserved;
+	int		st_ctime;
+	int		st_ctime_reserved;
+	long		st_blksize;
+	long		st_blocks;
+};
+
+/*
+ * The OSF/1 statfs structure is much larger, but this should
+ * match the beginning, at least.
+ */
+struct osf_statfs {
+	short f_type;
+	short f_flags;
+	int f_fsize;
+	int f_bsize;
+	int f_blocks;
+	int f_bfree;
+	int f_bavail;
+	int f_files;
+	int f_ffree;
+	__kernel_fsid_t f_fsid;
+};
+
+struct osf_statfs64 {
+	short f_type;
+	short f_flags;
+	int f_pad1;
+	int f_pad2;
+	int f_pad3;
+	int f_pad4;
+	int f_pad5;
+	int f_pad6;
+	int f_pad7;
+	__kernel_fsid_t f_fsid;
+	u_short f_namemax;
+	short f_reserved1;
+	int f_spare[8];
+	char f_pad8[90];
+	char f_pad9[90];
+	long mount_info[10];
+	u_long f_flags2;
+	long f_spare2[14];
+	long f_fsize;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+};
+
+static int
+linux_to_osf_stat(struct kstat *lstat, struct osf_stat __user *osf_stat)
+{
+	struct osf_stat tmp = { 0 };
+
+	tmp.st_dev	= lstat->dev;
+	tmp.st_mode	= lstat->mode;
+	tmp.st_nlink	= lstat->nlink;
+	tmp.st_uid	= from_kuid_munged(current_user_ns(), lstat->uid);
+	tmp.st_gid	= from_kgid_munged(current_user_ns(), lstat->gid);
+	tmp.st_rdev	= lstat->rdev;
+	tmp.st_ldev	= lstat->rdev;
+	tmp.st_size	= lstat->size;
+	tmp.st_uatime	= lstat->atime.tv_nsec / 1000;
+	tmp.st_umtime	= lstat->mtime.tv_nsec / 1000;
+	tmp.st_uctime	= lstat->ctime.tv_nsec / 1000;
+	tmp.st_ino	= lstat->ino;
+	tmp.st_atime	= lstat->atime.tv_sec;
+	tmp.st_mtime	= lstat->mtime.tv_sec;
+	tmp.st_ctime	= lstat->ctime.tv_sec;
+	tmp.st_blksize	= lstat->blksize;
+	tmp.st_blocks	= lstat->blocks;
+
+	return copy_to_user(osf_stat, &tmp, sizeof(tmp)) ? -EFAULT : 0;
+}
+
+static int
+linux_to_osf_statfs(struct kstatfs *linux_stat, struct osf_statfs __user *osf_stat,
+		    unsigned long bufsiz)
+{
+	struct osf_statfs tmp_stat;
+
+	tmp_stat.f_type = linux_stat->f_type;
+	tmp_stat.f_flags = 0;	/* mount flags */
+	tmp_stat.f_fsize = linux_stat->f_frsize;
+	tmp_stat.f_bsize = linux_stat->f_bsize;
+	tmp_stat.f_blocks = linux_stat->f_blocks;
+	tmp_stat.f_bfree = linux_stat->f_bfree;
+	tmp_stat.f_bavail = linux_stat->f_bavail;
+	tmp_stat.f_files = linux_stat->f_files;
+	tmp_stat.f_ffree = linux_stat->f_ffree;
+	tmp_stat.f_fsid = linux_stat->f_fsid;
+	if (bufsiz > sizeof(tmp_stat))
+		bufsiz = sizeof(tmp_stat);
+	return copy_to_user(osf_stat, &tmp_stat, bufsiz) ? -EFAULT : 0;
+}
+
+static int
+linux_to_osf_statfs64(struct kstatfs *linux_stat, struct osf_statfs64 __user *osf_stat,
+		      unsigned long bufsiz)
+{
+	struct osf_statfs64 tmp_stat = { 0 };
+
+	tmp_stat.f_type = linux_stat->f_type;
+	tmp_stat.f_fsize = linux_stat->f_frsize;
+	tmp_stat.f_bsize = linux_stat->f_bsize;
+	tmp_stat.f_blocks = linux_stat->f_blocks;
+	tmp_stat.f_bfree = linux_stat->f_bfree;
+	tmp_stat.f_bavail = linux_stat->f_bavail;
+	tmp_stat.f_files = linux_stat->f_files;
+	tmp_stat.f_ffree = linux_stat->f_ffree;
+	tmp_stat.f_fsid = linux_stat->f_fsid;
+	if (bufsiz > sizeof(tmp_stat))
+		bufsiz = sizeof(tmp_stat);
+	return copy_to_user(osf_stat, &tmp_stat, bufsiz) ? -EFAULT : 0;
+}
+
+SYSCALL_DEFINE3(osf_statfs, const char __user *, pathname,
+		struct osf_statfs __user *, buffer, unsigned long, bufsiz)
+{
+	struct kstatfs linux_stat;
+	int error = user_statfs(pathname, &linux_stat);
+	if (!error)
+		error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
+	return error;	
+}
+
+SYSCALL_DEFINE2(osf_stat, char __user *, name, struct osf_stat __user *, buf)
+{
+	struct kstat stat;
+	int error;
+
+	error = vfs_stat(name, &stat);
+	if (error)
+		return error;
+
+	return linux_to_osf_stat(&stat, buf);
+}
+
+SYSCALL_DEFINE2(osf_lstat, char __user *, name, struct osf_stat __user *, buf)
+{
+	struct kstat stat;
+	int error;
+
+	error = vfs_lstat(name, &stat);
+	if (error)
+		return error;
+
+	return linux_to_osf_stat(&stat, buf);
+}
+
+SYSCALL_DEFINE2(osf_fstat, int, fd, struct osf_stat __user *, buf)
+{
+	struct kstat stat;
+	int error;
+
+	error = vfs_fstat(fd, &stat);
+	if (error)
+		return error;
+
+	return linux_to_osf_stat(&stat, buf);
+}
+
+SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd,
+		struct osf_statfs __user *, buffer, unsigned long, bufsiz)
+{
+	struct kstatfs linux_stat;
+	int error = fd_statfs(fd, &linux_stat);
+	if (!error)
+		error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
+	return error;
+}
+
+SYSCALL_DEFINE3(osf_statfs64, char __user *, pathname,
+		struct osf_statfs64 __user *, buffer, unsigned long, bufsiz)
+{
+	struct kstatfs linux_stat;
+	int error = user_statfs(pathname, &linux_stat);
+	if (!error)
+		error = linux_to_osf_statfs64(&linux_stat, buffer, bufsiz);
+	return error;
+}
+
+SYSCALL_DEFINE3(osf_fstatfs64, unsigned long, fd,
+		struct osf_statfs64 __user *, buffer, unsigned long, bufsiz)
+{
+	struct kstatfs linux_stat;
+	int error = fd_statfs(fd, &linux_stat);
+	if (!error)
+		error = linux_to_osf_statfs64(&linux_stat, buffer, bufsiz);
+	return error;
+}
+
+/*
+ * Uhh.. OSF/1 mount parameters aren't exactly obvious..
+ *
+ * Although to be frank, neither are the native Linux/i386 ones..
+ */
+struct ufs_args {
+	char __user *devname;
+	int flags;
+	uid_t exroot;
+};
+
+struct cdfs_args {
+	char __user *devname;
+	int flags;
+	uid_t exroot;
+
+	/* This has lots more here, which Linux handles with the option block
+	   but I'm too lazy to do the translation into ASCII.  */
+};
+
+struct procfs_args {
+	char __user *devname;
+	int flags;
+	uid_t exroot;
+};
+
+/*
+ * We can't actually handle ufs yet, so we translate UFS mounts to
+ * ext2fs mounts. I wouldn't mind a UFS filesystem, but the UFS
+ * layout is so braindead it's a major headache doing it.
+ *
+ * Just how long ago was it written? OTOH our UFS driver may be still
+ * unhappy with OSF UFS. [CHECKME]
+ */
+static int
+osf_ufs_mount(const char __user *dirname,
+	      struct ufs_args __user *args, int flags)
+{
+	int retval;
+	struct cdfs_args tmp;
+	struct filename *devname;
+
+	retval = -EFAULT;
+	if (copy_from_user(&tmp, args, sizeof(tmp)))
+		goto out;
+	devname = getname(tmp.devname);
+	retval = PTR_ERR(devname);
+	if (IS_ERR(devname))
+		goto out;
+	retval = do_mount(devname->name, dirname, "ext2", flags, NULL);
+	putname(devname);
+ out:
+	return retval;
+}
+
+static int
+osf_cdfs_mount(const char __user *dirname,
+	       struct cdfs_args __user *args, int flags)
+{
+	int retval;
+	struct cdfs_args tmp;
+	struct filename *devname;
+
+	retval = -EFAULT;
+	if (copy_from_user(&tmp, args, sizeof(tmp)))
+		goto out;
+	devname = getname(tmp.devname);
+	retval = PTR_ERR(devname);
+	if (IS_ERR(devname))
+		goto out;
+	retval = do_mount(devname->name, dirname, "iso9660", flags, NULL);
+	putname(devname);
+ out:
+	return retval;
+}
+
+static int
+osf_procfs_mount(const char __user *dirname,
+		 struct procfs_args __user *args, int flags)
+{
+	struct procfs_args tmp;
+
+	if (copy_from_user(&tmp, args, sizeof(tmp)))
+		return -EFAULT;
+
+	return do_mount("", dirname, "proc", flags, NULL);
+}
+
+SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path,
+		int, flag, void __user *, data)
+{
+	int retval;
+
+	switch (typenr) {
+	case 1:
+		retval = osf_ufs_mount(path, data, flag);
+		break;
+	case 6:
+		retval = osf_cdfs_mount(path, data, flag);
+		break;
+	case 9:
+		retval = osf_procfs_mount(path, data, flag);
+		break;
+	default:
+		retval = -EINVAL;
+		printk_ratelimited("osf_mount(%ld, %x)\n", typenr, flag);
+	}
+
+	return retval;
+}
+
+SYSCALL_DEFINE1(osf_utsname, char __user *, name)
+{
+	char tmp[5 * 32];
+
+	down_read(&uts_sem);
+	memcpy(tmp + 0 * 32, utsname()->sysname, 32);
+	memcpy(tmp + 1 * 32, utsname()->nodename, 32);
+	memcpy(tmp + 2 * 32, utsname()->release, 32);
+	memcpy(tmp + 3 * 32, utsname()->version, 32);
+	memcpy(tmp + 4 * 32, utsname()->machine, 32);
+	up_read(&uts_sem);
+
+	if (copy_to_user(name, tmp, sizeof(tmp)))
+		return -EFAULT;
+	return 0;
+}
+
+SYSCALL_DEFINE0(getpagesize)
+{
+	return PAGE_SIZE;
+}
+
+SYSCALL_DEFINE0(getdtablesize)
+{
+	return sysctl_nr_open;
+}
+
+/*
+ * For compatibility with OSF/1 only.  Use utsname(2) instead.
+ */
+SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen)
+{
+	int len;
+	char *kname;
+	char tmp[32];
+
+	if (namelen < 0 || namelen > 32)
+		namelen = 32;
+
+	down_read(&uts_sem);
+	kname = utsname()->domainname;
+	len = strnlen(kname, namelen);
+	len = min(len + 1, namelen);
+	memcpy(tmp, kname, len);
+	up_read(&uts_sem);
+
+	if (copy_to_user(name, tmp, len))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * The following stuff should move into a header file should it ever
+ * be labeled "officially supported."  Right now, there is just enough
+ * support to avoid applications (such as tar) printing error
+ * messages.  The attributes are not really implemented.
+ */
+
+/*
+ * Values for Property list entry flag
+ */
+#define PLE_PROPAGATE_ON_COPY		0x1	/* cp(1) will copy entry
+						   by default */
+#define PLE_FLAG_MASK			0x1	/* Valid flag values */
+#define PLE_FLAG_ALL			-1	/* All flag value */
+
+struct proplistname_args {
+	unsigned int pl_mask;
+	unsigned int pl_numnames;
+	char **pl_names;
+};
+
+union pl_args {
+	struct setargs {
+		char __user *path;
+		long follow;
+		long nbytes;
+		char __user *buf;
+	} set;
+	struct fsetargs {
+		long fd;
+		long nbytes;
+		char __user *buf;
+	} fset;
+	struct getargs {
+		char __user *path;
+		long follow;
+		struct proplistname_args __user *name_args;
+		long nbytes;
+		char __user *buf;
+		int __user *min_buf_size;
+	} get;
+	struct fgetargs {
+		long fd;
+		struct proplistname_args __user *name_args;
+		long nbytes;
+		char __user *buf;
+		int __user *min_buf_size;
+	} fget;
+	struct delargs {
+		char __user *path;
+		long follow;
+		struct proplistname_args __user *name_args;
+	} del;
+	struct fdelargs {
+		long fd;
+		struct proplistname_args __user *name_args;
+	} fdel;
+};
+
+enum pl_code {
+	PL_SET = 1, PL_FSET = 2,
+	PL_GET = 3, PL_FGET = 4,
+	PL_DEL = 5, PL_FDEL = 6
+};
+
+SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
+		union pl_args __user *, args)
+{
+	long error;
+	int __user *min_buf_size_ptr;
+
+	switch (code) {
+	case PL_SET:
+		if (get_user(error, &args->set.nbytes))
+			error = -EFAULT;
+		break;
+	case PL_FSET:
+		if (get_user(error, &args->fset.nbytes))
+			error = -EFAULT;
+		break;
+	case PL_GET:
+		error = get_user(min_buf_size_ptr, &args->get.min_buf_size);
+		if (error)
+			break;
+		error = put_user(0, min_buf_size_ptr);
+		break;
+	case PL_FGET:
+		error = get_user(min_buf_size_ptr, &args->fget.min_buf_size);
+		if (error)
+			break;
+		error = put_user(0, min_buf_size_ptr);
+		break;
+	case PL_DEL:
+	case PL_FDEL:
+		error = 0;
+		break;
+	default:
+		error = -EOPNOTSUPP;
+		break;
+	}
+	return error;
+}
+
+SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
+		struct sigstack __user *, uoss)
+{
+	unsigned long usp = rdusp();
+	unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size;
+	unsigned long oss_os = on_sig_stack(usp);
+	int error;
+
+	if (uss) {
+		void __user *ss_sp;
+
+		error = -EFAULT;
+		if (get_user(ss_sp, &uss->ss_sp))
+			goto out;
+
+		/* If the current stack was set with sigaltstack, don't
+		   swap stacks while we are on it.  */
+		error = -EPERM;
+		if (current->sas_ss_sp && on_sig_stack(usp))
+			goto out;
+
+		/* Since we don't know the extent of the stack, and we don't
+		   track onstack-ness, but rather calculate it, we must 
+		   presume a size.  Ho hum this interface is lossy.  */
+		current->sas_ss_sp = (unsigned long)ss_sp - SIGSTKSZ;
+		current->sas_ss_size = SIGSTKSZ;
+	}
+
+	if (uoss) {
+		error = -EFAULT;
+		if (put_user(oss_sp, &uoss->ss_sp) ||
+		    put_user(oss_os, &uoss->ss_onstack))
+			goto out;
+	}
+
+	error = 0;
+ out:
+	return error;
+}
+
+SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
+{
+	const char *sysinfo_table[] = {
+		utsname()->sysname,
+		utsname()->nodename,
+		utsname()->release,
+		utsname()->version,
+		utsname()->machine,
+		"alpha",	/* instruction set architecture */
+		"dummy",	/* hardware serial number */
+		"dummy",	/* hardware manufacturer */
+		"dummy",	/* secure RPC domain */
+	};
+	unsigned long offset;
+	const char *res;
+	long len;
+	char tmp[__NEW_UTS_LEN + 1];
+
+	offset = command-1;
+	if (offset >= ARRAY_SIZE(sysinfo_table)) {
+		/* Digital UNIX has a few unpublished interfaces here */
+		printk("sysinfo(%d)", command);
+		return -EINVAL;
+	}
+
+	down_read(&uts_sem);
+	res = sysinfo_table[offset];
+	len = strlen(res)+1;
+	if ((unsigned long)len > (unsigned long)count)
+		len = count;
+	memcpy(tmp, res, len);
+	up_read(&uts_sem);
+	if (copy_to_user(buf, tmp, len))
+		return -EFAULT;
+	return 0;
+}
+
+SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
+		unsigned long, nbytes, int __user *, start, void __user *, arg)
+{
+	unsigned long w;
+	struct percpu_struct *cpu;
+
+	switch (op) {
+	case GSI_IEEE_FP_CONTROL:
+		/* Return current software fp control & status bits.  */
+		/* Note that DU doesn't verify available space here.  */
+
+ 		w = current_thread_info()->ieee_state & IEEE_SW_MASK;
+ 		w = swcr_update_status(w, rdfpcr());
+		if (put_user(w, (unsigned long __user *) buffer))
+			return -EFAULT;
+		return 0;
+
+	case GSI_IEEE_STATE_AT_SIGNAL:
+		/*
+		 * Not sure anybody will ever use this weird stuff.  These
+		 * ops can be used (under OSF/1) to set the fpcr that should
+		 * be used when a signal handler starts executing.
+		 */
+		break;
+
+ 	case GSI_UACPROC:
+		if (nbytes < sizeof(unsigned int))
+			return -EINVAL;
+		w = current_thread_info()->status & UAC_BITMASK;
+		if (put_user(w, (unsigned int __user *)buffer))
+			return -EFAULT;
+ 		return 1;
+
+	case GSI_PROC_TYPE:
+		if (nbytes < sizeof(unsigned long))
+			return -EINVAL;
+		cpu = (struct percpu_struct*)
+		  ((char*)hwrpb + hwrpb->processor_offset);
+		w = cpu->type;
+		if (put_user(w, (unsigned long  __user*)buffer))
+			return -EFAULT;
+		return 1;
+
+	case GSI_GET_HWRPB:
+		if (nbytes > sizeof(*hwrpb))
+			return -EINVAL;
+		if (copy_to_user(buffer, hwrpb, nbytes) != 0)
+			return -EFAULT;
+		return 1;
+
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
+		unsigned long, nbytes, int __user *, start, void __user *, arg)
+{
+	switch (op) {
+	case SSI_IEEE_FP_CONTROL: {
+		unsigned long swcr, fpcr;
+		unsigned int *state;
+
+		/* 
+		 * Alpha Architecture Handbook 4.7.7.3:
+		 * To be fully IEEE compiant, we must track the current IEEE
+		 * exception state in software, because spurious bits can be
+		 * set in the trap shadow of a software-complete insn.
+		 */
+
+		if (get_user(swcr, (unsigned long __user *)buffer))
+			return -EFAULT;
+		state = &current_thread_info()->ieee_state;
+
+		/* Update software trap enable bits.  */
+		*state = (*state & ~IEEE_SW_MASK) | (swcr & IEEE_SW_MASK);
+
+		/* Update the real fpcr.  */
+		fpcr = rdfpcr() & FPCR_DYN_MASK;
+		fpcr |= ieee_swcr_to_fpcr(swcr);
+		wrfpcr(fpcr);
+
+		return 0;
+	}
+
+	case SSI_IEEE_RAISE_EXCEPTION: {
+		unsigned long exc, swcr, fpcr, fex;
+		unsigned int *state;
+
+		if (get_user(exc, (unsigned long __user *)buffer))
+			return -EFAULT;
+		state = &current_thread_info()->ieee_state;
+		exc &= IEEE_STATUS_MASK;
+
+		/* Update software trap enable bits.  */
+ 		swcr = (*state & IEEE_SW_MASK) | exc;
+		*state |= exc;
+
+		/* Update the real fpcr.  */
+		fpcr = rdfpcr();
+		fpcr |= ieee_swcr_to_fpcr(swcr);
+		wrfpcr(fpcr);
+
+ 		/* If any exceptions set by this call, and are unmasked,
+		   send a signal.  Old exceptions are not signaled.  */
+		fex = (exc >> IEEE_STATUS_TO_EXCSUM_SHIFT) & swcr;
+ 		if (fex) {
+			int si_code = FPE_FLTUNK;
+
+			if (fex & IEEE_TRAP_ENABLE_DNO) si_code = FPE_FLTUND;
+			if (fex & IEEE_TRAP_ENABLE_INE) si_code = FPE_FLTRES;
+			if (fex & IEEE_TRAP_ENABLE_UNF) si_code = FPE_FLTUND;
+			if (fex & IEEE_TRAP_ENABLE_OVF) si_code = FPE_FLTOVF;
+			if (fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV;
+			if (fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV;
+
+			send_sig_fault_trapno(SIGFPE, si_code,
+				       (void __user *)NULL,  /* FIXME */
+				       0, current);
+ 		}
+		return 0;
+	}
+
+	case SSI_IEEE_STATE_AT_SIGNAL:
+	case SSI_IEEE_IGNORE_STATE_AT_SIGNAL:
+		/*
+		 * Not sure anybody will ever use this weird stuff.  These
+		 * ops can be used (under OSF/1) to set the fpcr that should
+		 * be used when a signal handler starts executing.
+		 */
+		break;
+
+ 	case SSI_NVPAIRS: {
+		unsigned __user *p = buffer;
+		unsigned i;
+		
+		for (i = 0, p = buffer; i < nbytes; ++i, p += 2) {
+			unsigned v, w, status;
+
+			if (get_user(v, p) || get_user(w, p + 1))
+ 				return -EFAULT;
+ 			switch (v) {
+ 			case SSIN_UACPROC:
+				w &= UAC_BITMASK;
+				status = current_thread_info()->status;
+				status = (status & ~UAC_BITMASK) | w;
+				current_thread_info()->status = status;
+ 				break;
+ 
+ 			default:
+ 				return -EOPNOTSUPP;
+ 			}
+ 		}
+ 		return 0;
+	}
+ 
+	case SSI_LMF:
+		return 0;
+
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+/* Translations due to the fact that OSF's time_t is an int.  Which
+   affects all sorts of things, like timeval and itimerval.  */
+
+extern struct timezone sys_tz;
+
+struct timeval32
+{
+    int tv_sec, tv_usec;
+};
+
+struct itimerval32
+{
+    struct timeval32 it_interval;
+    struct timeval32 it_value;
+};
+
+static inline long
+get_tv32(struct timespec64 *o, struct timeval32 __user *i)
+{
+	struct timeval32 tv;
+	if (copy_from_user(&tv, i, sizeof(struct timeval32)))
+		return -EFAULT;
+	o->tv_sec = tv.tv_sec;
+	o->tv_nsec = tv.tv_usec * NSEC_PER_USEC;
+	return 0;
+}
+
+static inline long
+put_tv32(struct timeval32 __user *o, struct timespec64 *i)
+{
+	return copy_to_user(o, &(struct timeval32){
+				.tv_sec = i->tv_sec,
+				.tv_usec = i->tv_nsec / NSEC_PER_USEC},
+			    sizeof(struct timeval32));
+}
+
+static inline long
+put_tv_to_tv32(struct timeval32 __user *o, struct __kernel_old_timeval *i)
+{
+	return copy_to_user(o, &(struct timeval32){
+				.tv_sec = i->tv_sec,
+				.tv_usec = i->tv_usec},
+			    sizeof(struct timeval32));
+}
+
+static inline void
+jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value)
+{
+	value->tv_usec = (jiffies % HZ) * (1000000L / HZ);
+	value->tv_sec = jiffies / HZ;
+}
+
+SYSCALL_DEFINE2(osf_gettimeofday, struct timeval32 __user *, tv,
+		struct timezone __user *, tz)
+{
+	if (tv) {
+		struct timespec64 kts;
+
+		ktime_get_real_ts64(&kts);
+		if (put_tv32(tv, &kts))
+			return -EFAULT;
+	}
+	if (tz) {
+		if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
+		struct timezone __user *, tz)
+{
+	struct timespec64 kts;
+	struct timezone ktz;
+
+ 	if (tv) {
+		if (get_tv32(&kts, tv))
+			return -EFAULT;
+	}
+	if (tz) {
+		if (copy_from_user(&ktz, tz, sizeof(*tz)))
+			return -EFAULT;
+	}
+
+	return do_sys_settimeofday64(tv ? &kts : NULL, tz ? &ktz : NULL);
+}
+
+SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
+		struct timeval32 __user *, tvs)
+{
+	struct timespec64 tv[2];
+
+	if (tvs) {
+		if (get_tv32(&tv[0], &tvs[0]) ||
+		    get_tv32(&tv[1], &tvs[1]))
+			return -EFAULT;
+
+		if (tv[0].tv_nsec < 0 || tv[0].tv_nsec >= 1000000000 ||
+		    tv[1].tv_nsec < 0 || tv[1].tv_nsec >= 1000000000)
+			return -EINVAL;
+	}
+
+	return do_utimes(AT_FDCWD, filename, tvs ? tv : NULL, 0);
+}
+
+SYSCALL_DEFINE5(osf_select, int, n, fd_set __user *, inp, fd_set __user *, outp,
+		fd_set __user *, exp, struct timeval32 __user *, tvp)
+{
+	struct timespec64 end_time, *to = NULL;
+	if (tvp) {
+		struct timespec64 tv;
+		to = &end_time;
+
+		if (get_tv32(&tv, tvp))
+		    	return -EFAULT;
+
+		if (tv.tv_sec < 0 || tv.tv_nsec < 0)
+			return -EINVAL;
+
+		if (poll_select_set_timeout(to, tv.tv_sec, tv.tv_nsec))
+			return -EINVAL;		
+
+	}
+
+	/* OSF does not copy back the remaining time.  */
+	return core_sys_select(n, inp, outp, exp, to);
+}
+
+struct rusage32 {
+	struct timeval32 ru_utime;	/* user time used */
+	struct timeval32 ru_stime;	/* system time used */
+	long	ru_maxrss;		/* maximum resident set size */
+	long	ru_ixrss;		/* integral shared memory size */
+	long	ru_idrss;		/* integral unshared data size */
+	long	ru_isrss;		/* integral unshared stack size */
+	long	ru_minflt;		/* page reclaims */
+	long	ru_majflt;		/* page faults */
+	long	ru_nswap;		/* swaps */
+	long	ru_inblock;		/* block input operations */
+	long	ru_oublock;		/* block output operations */
+	long	ru_msgsnd;		/* messages sent */
+	long	ru_msgrcv;		/* messages received */
+	long	ru_nsignals;		/* signals received */
+	long	ru_nvcsw;		/* voluntary context switches */
+	long	ru_nivcsw;		/* involuntary " */
+};
+
+SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
+{
+	struct rusage32 r;
+	u64 utime, stime;
+	unsigned long utime_jiffies, stime_jiffies;
+
+	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
+		return -EINVAL;
+
+	memset(&r, 0, sizeof(r));
+	switch (who) {
+	case RUSAGE_SELF:
+		task_cputime(current, &utime, &stime);
+		utime_jiffies = nsecs_to_jiffies(utime);
+		stime_jiffies = nsecs_to_jiffies(stime);
+		jiffies_to_timeval32(utime_jiffies, &r.ru_utime);
+		jiffies_to_timeval32(stime_jiffies, &r.ru_stime);
+		r.ru_minflt = current->min_flt;
+		r.ru_majflt = current->maj_flt;
+		break;
+	case RUSAGE_CHILDREN:
+		utime_jiffies = nsecs_to_jiffies(current->signal->cutime);
+		stime_jiffies = nsecs_to_jiffies(current->signal->cstime);
+		jiffies_to_timeval32(utime_jiffies, &r.ru_utime);
+		jiffies_to_timeval32(stime_jiffies, &r.ru_stime);
+		r.ru_minflt = current->signal->cmin_flt;
+		r.ru_majflt = current->signal->cmaj_flt;
+		break;
+	}
+
+	return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
+}
+
+SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
+		struct rusage32 __user *, ur)
+{
+	struct rusage r;
+	long err = kernel_wait4(pid, ustatus, options, &r);
+	if (err <= 0)
+		return err;
+	if (!ur)
+		return err;
+	if (put_tv_to_tv32(&ur->ru_utime, &r.ru_utime))
+		return -EFAULT;
+	if (put_tv_to_tv32(&ur->ru_stime, &r.ru_stime))
+		return -EFAULT;
+	if (copy_to_user(&ur->ru_maxrss, &r.ru_maxrss,
+	      sizeof(struct rusage32) - offsetof(struct rusage32, ru_maxrss)))
+		return -EFAULT;
+	return err;
+}
+
+/*
+ * I don't know what the parameters are: the first one
+ * seems to be a timeval pointer, and I suspect the second
+ * one is the time remaining.. Ho humm.. No documentation.
+ */
+SYSCALL_DEFINE2(osf_usleep_thread, struct timeval32 __user *, sleep,
+		struct timeval32 __user *, remain)
+{
+	struct timespec64 tmp;
+	unsigned long ticks;
+
+	if (get_tv32(&tmp, sleep))
+		goto fault;
+
+	ticks = timespec64_to_jiffies(&tmp);
+
+	ticks = schedule_timeout_interruptible(ticks);
+
+	if (remain) {
+		jiffies_to_timespec64(ticks, &tmp);
+		if (put_tv32(remain, &tmp))
+			goto fault;
+	}
+	
+	return 0;
+ fault:
+	return -EFAULT;
+}
+
+
+struct timex32 {
+	unsigned int modes;	/* mode selector */
+	long offset;		/* time offset (usec) */
+	long freq;		/* frequency offset (scaled ppm) */
+	long maxerror;		/* maximum error (usec) */
+	long esterror;		/* estimated error (usec) */
+	int status;		/* clock command/status */
+	long constant;		/* pll time constant */
+	long precision;		/* clock precision (usec) (read only) */
+	long tolerance;		/* clock frequency tolerance (ppm)
+				 * (read only)
+				 */
+	struct timeval32 time;	/* (read only) */
+	long tick;		/* (modified) usecs between clock ticks */
+
+	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
+	long jitter;            /* pps jitter (us) (ro) */
+	int shift;              /* interval duration (s) (shift) (ro) */
+	long stabil;            /* pps stability (scaled ppm) (ro) */
+	long jitcnt;            /* jitter limit exceeded (ro) */
+	long calcnt;            /* calibration intervals (ro) */
+	long errcnt;            /* calibration errors (ro) */
+	long stbcnt;            /* stability limit exceeded (ro) */
+
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32; int  :32;
+};
+
+SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
+{
+	struct __kernel_timex txc;
+	int ret;
+
+	/* copy relevant bits of struct timex. */
+	if (copy_from_user(&txc, txc_p, offsetof(struct timex32, time)) ||
+	    copy_from_user(&txc.tick, &txc_p->tick, sizeof(struct timex32) - 
+			   offsetof(struct timex32, tick)))
+	  return -EFAULT;
+
+	ret = do_adjtimex(&txc);	
+	if (ret < 0)
+	  return ret;
+	
+	/* copy back to timex32 */
+	if (copy_to_user(txc_p, &txc, offsetof(struct timex32, time)) ||
+	    (copy_to_user(&txc_p->tick, &txc.tick, sizeof(struct timex32) - 
+			  offsetof(struct timex32, tick))) ||
+	    (put_user(txc.time.tv_sec, &txc_p->time.tv_sec)) ||
+	    (put_user(txc.time.tv_usec, &txc_p->time.tv_usec)))
+	  return -EFAULT;
+
+	return ret;
+}
+
+/* Get an address range which is currently unmapped.  Similar to the
+   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+
+static unsigned long
+arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
+		         unsigned long limit)
+{
+	struct vm_unmapped_area_info info;
+
+	info.flags = 0;
+	info.length = len;
+	info.low_limit = addr;
+	info.high_limit = limit;
+	info.align_mask = 0;
+	info.align_offset = 0;
+	return vm_unmapped_area(&info);
+}
+
+unsigned long
+arch_get_unmapped_area(struct file *filp, unsigned long addr,
+		       unsigned long len, unsigned long pgoff,
+		       unsigned long flags)
+{
+	unsigned long limit;
+
+	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
+	if (current->personality & ADDR_LIMIT_32BIT)
+		limit = 0x80000000;
+	else
+		limit = TASK_SIZE;
+
+	if (len > limit)
+		return -ENOMEM;
+
+	if (flags & MAP_FIXED)
+		return addr;
+
+	/* First, see if the given suggestion fits.
+
+	   The OSF/1 loader (/sbin/loader) relies on us returning an
+	   address larger than the requested if one exists, which is
+	   a terribly broken way to program.
+
+	   That said, I can see the use in being able to suggest not
+	   merely specific addresses, but regions of memory -- perhaps
+	   this feature should be incorporated into all ports?  */
+
+	if (addr) {
+		addr = arch_get_unmapped_area_1 (PAGE_ALIGN(addr), len, limit);
+		if (addr != (unsigned long) -ENOMEM)
+			return addr;
+	}
+
+	/* Next, try allocating at TASK_UNMAPPED_BASE.  */
+	addr = arch_get_unmapped_area_1 (PAGE_ALIGN(TASK_UNMAPPED_BASE),
+					 len, limit);
+	if (addr != (unsigned long) -ENOMEM)
+		return addr;
+
+	/* Finally, try allocating in low memory.  */
+	addr = arch_get_unmapped_area_1 (PAGE_SIZE, len, limit);
+
+	return addr;
+}
+
+SYSCALL_DEFINE2(osf_getpriority, int, which, int, who)
+{
+	int prio = sys_getpriority(which, who);
+	if (prio >= 0) {
+		/* Return value is the unbiased priority, i.e. 20 - prio.
+		   This does result in negative return values, so signal
+		   no error */
+		force_successful_syscall_return();
+		prio = 20 - prio;
+	}
+	return prio;
+}
+
+SYSCALL_DEFINE0(getxuid)
+{
+	current_pt_regs()->r20 = sys_geteuid();
+	return sys_getuid();
+}
+
+SYSCALL_DEFINE0(getxgid)
+{
+	current_pt_regs()->r20 = sys_getegid();
+	return sys_getgid();
+}
+
+SYSCALL_DEFINE0(getxpid)
+{
+	current_pt_regs()->r20 = sys_getppid();
+	return sys_getpid();
+}
+
+SYSCALL_DEFINE0(alpha_pipe)
+{
+	int fd[2];
+	int res = do_pipe_flags(fd, 0);
+	if (!res) {
+		/* The return values are in $0 and $20.  */
+		current_pt_regs()->r20 = fd[1];
+		res = fd[0];
+	}
+	return res;
+}
+
+SYSCALL_DEFINE1(sethae, unsigned long, val)
+{
+	current_pt_regs()->hae = val;
+	return 0;
+}
diff --git a/arch/alpha/kernel/pc873xx.c b/arch/alpha/kernel/pc873xx.c
new file mode 100644
index 0000000000..82b19c9e59
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base(void)
+{
+	return base;
+}
+
+char *__init pc873xx_get_model(void)
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}
diff --git a/arch/alpha/kernel/pc873xx.h b/arch/alpha/kernel/pc873xx.h
new file mode 100644
index 0000000000..0435330275
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
new file mode 100644
index 0000000000..ae82061eda
--- /dev/null
+++ b/arch/alpha/kernel/pci-noop.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/pci-noop.c
+ *
+ * Stub PCI interfaces for Jensen-specific kernels.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/gfp.h>
+#include <linux/capability.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/syscalls.h>
+
+#include "proto.h"
+
+
+/*
+ * The PCI controller list.
+ */
+
+struct pci_controller *hose_head, **hose_tail = &hose_head;
+struct pci_controller *pci_isa_hose;
+
+
+struct pci_controller * __init
+alloc_pci_controller(void)
+{
+	struct pci_controller *hose;
+
+	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
+	if (!hose)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(*hose));
+
+	*hose_tail = hose;
+	hose_tail = &hose->next;
+
+	return hose;
+}
+
+struct resource * __init
+alloc_resource(void)
+{
+	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
+
+	if (!ptr)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(struct resource));
+
+	return ptr;
+}
+
+SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus,
+		unsigned long, dfn)
+{
+	struct pci_controller *hose;
+
+	/* from hose or from bus.devfn */
+	if (which & IOBASE_FROM_HOSE) {
+		for (hose = hose_head; hose; hose = hose->next)
+			if (hose->index == bus)
+				break;
+		if (!hose)
+			return -ENODEV;
+	} else {
+		/* Special hook for ISA access.  */
+		if (bus == 0 && dfn == 0)
+			hose = pci_isa_hose;
+		else
+			return -ENODEV;
+	}
+
+	switch (which & ~IOBASE_FROM_HOSE) {
+	case IOBASE_HOSE:
+		return hose->index;
+	case IOBASE_SPARSE_MEM:
+		return hose->sparse_mem_base;
+	case IOBASE_DENSE_MEM:
+		return hose->dense_mem_base;
+	case IOBASE_SPARSE_IO:
+		return hose->sparse_io_base;
+	case IOBASE_DENSE_IO:
+		return hose->dense_io_base;
+	case IOBASE_ROOT_BUS:
+		return hose->bus->number;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
+		unsigned long, off, unsigned long, len, void __user *, buf)
+{
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	else
+		return -ENODEV;
+}
+
+SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
+		unsigned long, off, unsigned long, len, void __user *, buf)
+{
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	else
+		return -ENODEV;
+}
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
new file mode 100644
index 0000000000..5808a66e2a
--- /dev/null
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/alpha/kernel/pci-sysfs.c
+ *
+ * Copyright (C) 2009 Ivan Kokshaysky
+ *
+ * Alpha PCI resource files.
+ *
+ * Loosely based on generic HAVE_PCI_MMAP implementation in
+ * drivers/pci/pci-sysfs.c
+ */
+
+#include <linux/sched.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+
+static int hose_mmap_page_range(struct pci_controller *hose,
+				struct vm_area_struct *vma,
+				enum pci_mmap_state mmap_type, int sparse)
+{
+	unsigned long base;
+
+	if (mmap_type == pci_mmap_mem)
+		base = sparse ? hose->sparse_mem_base : hose->dense_mem_base;
+	else
+		base = sparse ? hose->sparse_io_base : hose->dense_io_base;
+
+	vma->vm_pgoff += base >> PAGE_SHIFT;
+
+	return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+				  vma->vm_end - vma->vm_start,
+				  vma->vm_page_prot);
+}
+
+static int __pci_mmap_fits(struct pci_dev *pdev, int num,
+			   struct vm_area_struct *vma, int sparse)
+{
+	unsigned long nr, start, size;
+	int shift = sparse ? 5 : 0;
+
+	nr = vma_pages(vma);
+	start = vma->vm_pgoff;
+	size = ((pci_resource_len(pdev, num) - 1) >> (PAGE_SHIFT - shift)) + 1;
+
+	if (start < size && size - start >= nr)
+		return 1;
+	WARN(1, "process \"%s\" tried to map%s 0x%08lx-0x%08lx on %s BAR %d "
+		"(size 0x%08lx)\n",
+		current->comm, sparse ? " sparse" : "", start, start + nr,
+		pci_name(pdev), num, size);
+	return 0;
+}
+
+/**
+ * pci_mmap_resource - map a PCI resource into user memory space
+ * @kobj: kobject for mapping
+ * @attr: struct bin_attribute for the file being mapped
+ * @vma: struct vm_area_struct passed into the mmap
+ * @sparse: address space type
+ *
+ * Use the bus mapping routines to map a PCI resource into userspace.
+ *
+ * Return: %0 on success, negative error code otherwise
+ */
+static int pci_mmap_resource(struct kobject *kobj,
+			     struct bin_attribute *attr,
+			     struct vm_area_struct *vma, int sparse)
+{
+	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
+	struct resource *res = attr->private;
+	enum pci_mmap_state mmap_type;
+	struct pci_bus_region bar;
+	int i;
+
+	for (i = 0; i < PCI_STD_NUM_BARS; i++)
+		if (res == &pdev->resource[i])
+			break;
+	if (i >= PCI_STD_NUM_BARS)
+		return -ENODEV;
+
+	if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start))
+		return -EINVAL;
+
+	if (!__pci_mmap_fits(pdev, i, vma, sparse))
+		return -EINVAL;
+
+	pcibios_resource_to_bus(pdev->bus, &bar, res);
+	vma->vm_pgoff += bar.start >> (PAGE_SHIFT - (sparse ? 5 : 0));
+	mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
+
+	return hose_mmap_page_range(pdev->sysdata, vma, mmap_type, sparse);
+}
+
+static int pci_mmap_resource_sparse(struct file *filp, struct kobject *kobj,
+				    struct bin_attribute *attr,
+				    struct vm_area_struct *vma)
+{
+	return pci_mmap_resource(kobj, attr, vma, 1);
+}
+
+static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr,
+				   struct vm_area_struct *vma)
+{
+	return pci_mmap_resource(kobj, attr, vma, 0);
+}
+
+/**
+ * pci_remove_resource_files - cleanup resource files
+ * @pdev: pci_dev to cleanup
+ *
+ * If we created resource files for @dev, remove them from sysfs and
+ * free their resources.
+ */
+void pci_remove_resource_files(struct pci_dev *pdev)
+{
+	int i;
+
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		struct bin_attribute *res_attr;
+
+		res_attr = pdev->res_attr[i];
+		if (res_attr) {
+			sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+			kfree(res_attr);
+		}
+
+		res_attr = pdev->res_attr_wc[i];
+		if (res_attr) {
+			sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+			kfree(res_attr);
+		}
+	}
+}
+
+static int sparse_mem_mmap_fits(struct pci_dev *pdev, int num)
+{
+	struct pci_bus_region bar;
+	struct pci_controller *hose = pdev->sysdata;
+	long dense_offset;
+	unsigned long sparse_size;
+
+	pcibios_resource_to_bus(pdev->bus, &bar, &pdev->resource[num]);
+
+	/* All core logic chips have 4G sparse address space, except
+	   CIA which has 16G (see xxx_SPARSE_MEM and xxx_DENSE_MEM
+	   definitions in asm/core_xxx.h files). This corresponds
+	   to 128M or 512M of the bus space. */
+	dense_offset = (long)(hose->dense_mem_base - hose->sparse_mem_base);
+	sparse_size = dense_offset >= 0x400000000UL ? 0x20000000 : 0x8000000;
+
+	return bar.end < sparse_size;
+}
+
+static int pci_create_one_attr(struct pci_dev *pdev, int num, char *name,
+			       char *suffix, struct bin_attribute *res_attr,
+			       unsigned long sparse)
+{
+	size_t size = pci_resource_len(pdev, num);
+
+	sprintf(name, "resource%d%s", num, suffix);
+	res_attr->mmap = sparse ? pci_mmap_resource_sparse :
+				  pci_mmap_resource_dense;
+	res_attr->attr.name = name;
+	res_attr->attr.mode = S_IRUSR | S_IWUSR;
+	res_attr->size = sparse ? size << 5 : size;
+	res_attr->private = &pdev->resource[num];
+	return sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+}
+
+static int pci_create_attr(struct pci_dev *pdev, int num)
+{
+	/* allocate attribute structure, piggyback attribute name */
+	int retval, nlen1, nlen2 = 0, res_count = 1;
+	unsigned long sparse_base, dense_base;
+	struct bin_attribute *attr;
+	struct pci_controller *hose = pdev->sysdata;
+	char *suffix, *attr_name;
+
+	suffix = "";	/* Assume bwx machine, normal resourceN files. */
+	nlen1 = 10;
+
+	if (pdev->resource[num].flags & IORESOURCE_MEM) {
+		sparse_base = hose->sparse_mem_base;
+		dense_base = hose->dense_mem_base;
+		if (sparse_base && !sparse_mem_mmap_fits(pdev, num)) {
+			sparse_base = 0;
+			suffix = "_dense";
+			nlen1 = 16;	/* resourceN_dense */
+		}
+	} else {
+		sparse_base = hose->sparse_io_base;
+		dense_base = hose->dense_io_base;
+	}
+
+	if (sparse_base) {
+		suffix = "_sparse";
+		nlen1 = 17;
+		if (dense_base) {
+			nlen2 = 16;	/* resourceN_dense */
+			res_count = 2;
+		}
+	}
+
+	attr = kzalloc(sizeof(*attr) * res_count + nlen1 + nlen2, GFP_ATOMIC);
+	if (!attr)
+		return -ENOMEM;
+
+	/* Create bwx, sparse or single dense file */
+	attr_name = (char *)(attr + res_count);
+	pdev->res_attr[num] = attr;
+	retval = pci_create_one_attr(pdev, num, attr_name, suffix, attr,
+				     sparse_base);
+	if (retval || res_count == 1)
+		return retval;
+
+	/* Create dense file */
+	attr_name += nlen1;
+	attr++;
+	pdev->res_attr_wc[num] = attr;
+	return pci_create_one_attr(pdev, num, attr_name, "_dense", attr, 0);
+}
+
+/**
+ * pci_create_resource_files - create resource files in sysfs for @pdev
+ * @pdev: pci_dev in question
+ *
+ * Walk the resources in @dev creating files for each resource available.
+ *
+ * Return: %0 on success, or negative error code
+ */
+int pci_create_resource_files(struct pci_dev *pdev)
+{
+	int i;
+	int retval;
+
+	/* Expose the PCI resources from this device as files */
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+
+		/* skip empty resources */
+		if (!pci_resource_len(pdev, i))
+			continue;
+
+		retval = pci_create_attr(pdev, i);
+		if (retval) {
+			pci_remove_resource_files(pdev);
+			return retval;
+		}
+	}
+	return 0;
+}
+
+/* Legacy I/O bus mapping stuff. */
+
+static int __legacy_mmap_fits(struct pci_controller *hose,
+			      struct vm_area_struct *vma,
+			      unsigned long res_size, int sparse)
+{
+	unsigned long nr, start, size;
+
+	nr = vma_pages(vma);
+	start = vma->vm_pgoff;
+	size = ((res_size - 1) >> PAGE_SHIFT) + 1;
+
+	if (start < size && size - start >= nr)
+		return 1;
+	WARN(1, "process \"%s\" tried to map%s 0x%08lx-0x%08lx on hose %d "
+		"(size 0x%08lx)\n",
+		current->comm, sparse ? " sparse" : "", start, start + nr,
+		hose->index, size);
+	return 0;
+}
+
+static inline int has_sparse(struct pci_controller *hose,
+			     enum pci_mmap_state mmap_type)
+{
+	unsigned long base;
+
+	base = (mmap_type == pci_mmap_mem) ? hose->sparse_mem_base :
+					     hose->sparse_io_base;
+
+	return base != 0;
+}
+
+int pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_type)
+{
+	struct pci_controller *hose = bus->sysdata;
+	int sparse = has_sparse(hose, mmap_type);
+	unsigned long res_size;
+
+	res_size = (mmap_type == pci_mmap_mem) ? bus->legacy_mem->size :
+						 bus->legacy_io->size;
+	if (!__legacy_mmap_fits(hose, vma, res_size, sparse))
+		return -EINVAL;
+
+	return hose_mmap_page_range(hose, vma, mmap_type, sparse);
+}
+
+/**
+ * pci_adjust_legacy_attr - adjustment of legacy file attributes
+ * @bus: bus to create files under
+ * @mmap_type: I/O port or memory
+ *
+ * Adjust file name and size for sparse mappings.
+ */
+void pci_adjust_legacy_attr(struct pci_bus *bus, enum pci_mmap_state mmap_type)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (!has_sparse(hose, mmap_type))
+		return;
+
+	if (mmap_type == pci_mmap_mem) {
+		bus->legacy_mem->attr.name = "legacy_mem_sparse";
+		bus->legacy_mem->size <<= 5;
+	} else {
+		bus->legacy_io->attr.name = "legacy_io_sparse";
+		bus->legacy_io->size <<= 5;
+	}
+	return;
+}
+
+/* Legacy I/O bus read/write functions */
+int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	port += hose->io_space->start;
+
+	switch(size) {
+	case 1:
+		*((u8 *)val) = inb(port);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		*((u16 *)val) = inw(port);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		*((u32 *)val) = inl(port);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	port += hose->io_space->start;
+
+	switch(size) {
+	case 1:
+		outb(port, val);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		outw(port, val);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		outl(port, val);
+		return 4;
+	}
+	return -EINVAL;
+}
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
new file mode 100644
index 0000000000..4458eb7f44
--- /dev/null
+++ b/arch/alpha/kernel/pci.c
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/pci.c
+ *
+ * Extruded from code written by
+ *	Dave Rusling (david.rusling@reo.mts.dec.com)
+ *	David Mosberger (davidm@cs.arizona.edu)
+ */
+
+/* 2.3.x PCI/resources, 1999 Andrea Arcangeli <andrea@suse.de> */
+
+/*
+ * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
+ *	     PCI-PCI bridges cleanup
+ */
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/module.h>
+#include <linux/cache.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+#include <asm/machvec.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+
+/*
+ * Some string constants used by the various core logics. 
+ */
+
+const char *const pci_io_names[] = {
+  "PCI IO bus 0", "PCI IO bus 1", "PCI IO bus 2", "PCI IO bus 3",
+  "PCI IO bus 4", "PCI IO bus 5", "PCI IO bus 6", "PCI IO bus 7"
+};
+
+const char *const pci_mem_names[] = {
+  "PCI mem bus 0", "PCI mem bus 1", "PCI mem bus 2", "PCI mem bus 3",
+  "PCI mem bus 4", "PCI mem bus 5", "PCI mem bus 6", "PCI mem bus 7"
+};
+
+const char pci_hae0_name[] = "HAE0";
+
+/*
+ * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
+ * assignments.
+ */
+
+/*
+ * The PCI controller list.
+ */
+
+struct pci_controller *hose_head, **hose_tail = &hose_head;
+struct pci_controller *pci_isa_hose;
+
+/*
+ * Quirks.
+ */
+
+static void quirk_isa_bridge(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_ISA << 8;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
+
+static void quirk_cypress(struct pci_dev *dev)
+{
+	/* The Notorious Cy82C693 chip.  */
+
+	/* The generic legacy mode IDE fixup in drivers/pci/probe.c
+	   doesn't work correctly with the Cypress IDE controller as
+	   it has non-standard register layout.  Fix that.  */
+	if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+		dev->resource[2].start = dev->resource[3].start = 0;
+		dev->resource[2].end = dev->resource[3].end = 0;
+		dev->resource[2].flags = dev->resource[3].flags = 0;
+		if (PCI_FUNC(dev->devfn) == 2) {
+			dev->resource[0].start = 0x170;
+			dev->resource[0].end = 0x177;
+			dev->resource[1].start = 0x376;
+			dev->resource[1].end = 0x376;
+		}
+	}
+
+	/* The Cypress bridge responds on the PCI bus in the address range
+	   0xffff0000-0xffffffff (conventional x86 BIOS ROM).  There is no
+	   way to turn this off.  The bridge also supports several extended
+	   BIOS ranges (disabled after power-up), and some consoles do turn
+	   them on.  So if we use a large direct-map window, or a large SG
+	   window, we must avoid the entire 0xfff00000-0xffffffff region.  */
+	if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
+		if (__direct_map_base + __direct_map_size >= 0xfff00000UL)
+			__direct_map_size = 0xfff00000UL - __direct_map_base;
+		else {
+			struct pci_controller *hose = dev->sysdata;
+			struct pci_iommu_arena *pci = hose->sg_pci;
+			if (pci && pci->dma_base + pci->size >= 0xfff00000UL)
+				pci->size = 0xfff00000UL - pci->dma_base;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
+
+/* Called for each device after PCI setup is done. */
+static void pcibios_fixup_final(struct pci_dev *dev)
+{
+	unsigned int class = dev->class >> 8;
+
+	if (class == PCI_CLASS_BRIDGE_ISA || class == PCI_CLASS_BRIDGE_EISA) {
+		dev->dma_mask = MAX_ISA_DMA_ADDRESS - 1;
+		isa_bridge = dev;
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
+
+/* Just declaring that the power-of-ten prefixes are actually the
+   power-of-two ones doesn't make it true :) */
+#define KB			1024
+#define MB			(1024*KB)
+#define GB			(1024*MB)
+
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+		       resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+	struct pci_controller *hose = dev->sysdata;
+	unsigned long alignto;
+	resource_size_t start = res->start;
+
+	if (res->flags & IORESOURCE_IO) {
+		/* Make sure we start at our min on all hoses */
+		if (start - hose->io_space->start < PCIBIOS_MIN_IO)
+			start = PCIBIOS_MIN_IO + hose->io_space->start;
+
+		/*
+		 * Put everything into 0x00-0xff region modulo 0x400
+		 */
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
+	}
+	else if	(res->flags & IORESOURCE_MEM) {
+		/* Make sure we start at our min on all hoses */
+		if (start - hose->mem_space->start < PCIBIOS_MIN_MEM)
+			start = PCIBIOS_MIN_MEM + hose->mem_space->start;
+
+		/*
+		 * The following holds at least for the Low Cost
+		 * Alpha implementation of the PCI interface:
+		 *
+		 * In sparse memory address space, the first
+		 * octant (16MB) of every 128MB segment is
+		 * aliased to the very first 16 MB of the
+		 * address space (i.e., it aliases the ISA
+		 * memory address space).  Thus, we try to
+		 * avoid allocating PCI devices in that range.
+		 * Can be allocated in 2nd-7th octant only.
+		 * Devices that need more than 112MB of
+		 * address space must be accessed through
+		 * dense memory space only!
+		 */
+
+		/* Align to multiple of size of minimum base.  */
+		alignto = max_t(resource_size_t, 0x1000, align);
+		start = ALIGN(start, alignto);
+		if (hose->sparse_mem_base && size <= 7 * 16*MB) {
+			if (((start / (16*MB)) & 0x7) == 0) {
+				start &= ~(128*MB - 1);
+				start += 16*MB;
+				start  = ALIGN(start, alignto);
+			}
+			if (start/(128*MB) != (start + size - 1)/(128*MB)) {
+				start &= ~(128*MB - 1);
+				start += (128 + 16)*MB;
+				start  = ALIGN(start, alignto);
+			}
+		}
+	}
+
+	return start;
+}
+#undef KB
+#undef MB
+#undef GB
+
+static int __init
+pcibios_init(void)
+{
+	if (alpha_mv.init_pci)
+		alpha_mv.init_pci();
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+#ifdef ALPHA_RESTORE_SRM_SETUP
+/* Store PCI device configuration left by SRM here. */
+struct pdev_srm_saved_conf
+{
+	struct pdev_srm_saved_conf *next;
+	struct pci_dev *dev;
+};
+
+static struct pdev_srm_saved_conf *srm_saved_configs;
+
+static void pdev_save_srm_config(struct pci_dev *dev)
+{
+	struct pdev_srm_saved_conf *tmp;
+	static int printed = 0;
+
+	if (!alpha_using_srm || pci_has_flag(PCI_PROBE_ONLY))
+		return;
+
+	if (!printed) {
+		printk(KERN_INFO "pci: enabling save/restore of SRM state\n");
+		printed = 1;
+	}
+
+	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+	if (!tmp) {
+		printk(KERN_ERR "%s: kmalloc() failed!\n", __func__);
+		return;
+	}
+	tmp->next = srm_saved_configs;
+	tmp->dev = dev;
+
+	pci_save_state(dev);
+
+	srm_saved_configs = tmp;
+}
+
+void
+pci_restore_srm_config(void)
+{
+	struct pdev_srm_saved_conf *tmp;
+
+	/* No need to restore if probed only. */
+	if (pci_has_flag(PCI_PROBE_ONLY))
+		return;
+
+	/* Restore SRM config. */
+	for (tmp = srm_saved_configs; tmp; tmp = tmp->next) {
+		pci_restore_state(tmp->dev);
+	}
+}
+#else
+#define pdev_save_srm_config(dev)	do {} while (0)
+#endif
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+
+	if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
+	    (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		pci_read_bridge_bases(bus);
+	}
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pdev_save_srm_config(dev);
+	}
+}
+
+/*
+ *  If we set up a device for bus mastering, we need to check the latency
+ *  timer as certain firmware forgets to set it properly, as seen
+ *  on SX164 and LX164 with SRM.
+ */
+void
+pcibios_set_master(struct pci_dev *dev)
+{
+	u8 lat;
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+	if (lat >= 16) return;
+	printk("PCI: Setting latency timer of device %s to 64\n",
+							pci_name(dev));
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
+}
+
+void __init
+pcibios_claim_one_bus(struct pci_bus *b)
+{
+	struct pci_dev *dev;
+	struct pci_bus *child_bus;
+
+	list_for_each_entry(dev, &b->devices, bus_list) {
+		struct resource *r;
+		int i;
+
+		pci_dev_for_each_resource(dev, r, i) {
+			if (r->parent || !r->start || !r->flags)
+				continue;
+			if (pci_has_flag(PCI_PROBE_ONLY) ||
+			    (r->flags & IORESOURCE_PCI_FIXED)) {
+				if (pci_claim_resource(dev, i) == 0)
+					continue;
+
+				pci_claim_bridge_resource(dev, i);
+			}
+		}
+	}
+
+	list_for_each_entry(child_bus, &b->children, node)
+		pcibios_claim_one_bus(child_bus);
+}
+
+static void __init
+pcibios_claim_console_setup(void)
+{
+	struct pci_bus *b;
+
+	list_for_each_entry(b, &pci_root_buses, node)
+		pcibios_claim_one_bus(b);
+}
+
+void __init
+common_init_pci(void)
+{
+	struct pci_controller *hose;
+	struct list_head resources;
+	struct pci_host_bridge *bridge;
+	struct pci_bus *bus;
+	int ret, next_busno;
+	int need_domain_info = 0;
+	u32 pci_mem_end;
+	u32 sg_base;
+	unsigned long end;
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
+		sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0;
+
+		/* Adjust hose mem_space limit to prevent PCI allocations
+		   in the iommu windows. */
+		pci_mem_end = min((u32)__direct_map_base, sg_base) - 1;
+		end = hose->mem_space->start + pci_mem_end;
+		if (hose->mem_space->end > end)
+			hose->mem_space->end = end;
+
+		INIT_LIST_HEAD(&resources);
+		pci_add_resource_offset(&resources, hose->io_space,
+					hose->io_space->start);
+		pci_add_resource_offset(&resources, hose->mem_space,
+					hose->mem_space->start);
+
+		bridge = pci_alloc_host_bridge(0);
+		if (!bridge)
+			continue;
+
+		list_splice_init(&resources, &bridge->windows);
+		bridge->dev.parent = NULL;
+		bridge->sysdata = hose;
+		bridge->busnr = next_busno;
+		bridge->ops = alpha_mv.pci_ops;
+		bridge->swizzle_irq = alpha_mv.pci_swizzle;
+		bridge->map_irq = alpha_mv.pci_map_irq;
+
+		ret = pci_scan_root_bus_bridge(bridge);
+		if (ret) {
+			pci_free_host_bridge(bridge);
+			continue;
+		}
+
+		bus = hose->bus = bridge->bus;
+		hose->need_domain_info = need_domain_info;
+		next_busno = bus->busn_res.end + 1;
+		/* Don't allow 8-bit bus number overflow inside the hose -
+		   reserve some space for bridges. */ 
+		if (next_busno > 224) {
+			next_busno = 0;
+			need_domain_info = 1;
+		}
+	}
+
+	pcibios_claim_console_setup();
+
+	pci_assign_unassigned_resources();
+	for (hose = hose_head; hose; hose = hose->next) {
+		bus = hose->bus;
+		if (bus)
+			pci_bus_add_devices(bus);
+	}
+}
+
+struct pci_controller * __init
+alloc_pci_controller(void)
+{
+	struct pci_controller *hose;
+
+	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
+	if (!hose)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(*hose));
+
+	*hose_tail = hose;
+	hose_tail = &hose->next;
+
+	return hose;
+}
+
+struct resource * __init
+alloc_resource(void)
+{
+	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
+
+	if (!ptr)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(struct resource));
+
+	return ptr;
+}
+
+
+/* Provide information on locations of various I/O regions in physical
+   memory.  Do this on a per-card basis so that we choose the right hose.  */
+
+SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus,
+		unsigned long, dfn)
+{
+	struct pci_controller *hose;
+	struct pci_dev *dev;
+
+	/* from hose or from bus.devfn */
+	if (which & IOBASE_FROM_HOSE) {
+		for(hose = hose_head; hose; hose = hose->next) 
+			if (hose->index == bus) break;
+		if (!hose) return -ENODEV;
+	} else {
+		/* Special hook for ISA access.  */
+		if (bus == 0 && dfn == 0) {
+			hose = pci_isa_hose;
+		} else {
+			dev = pci_get_domain_bus_and_slot(0, bus, dfn);
+			if (!dev)
+				return -ENODEV;
+			hose = dev->sysdata;
+			pci_dev_put(dev);
+		}
+	}
+
+	switch (which & ~IOBASE_FROM_HOSE) {
+	case IOBASE_HOSE:
+		return hose->index;
+	case IOBASE_SPARSE_MEM:
+		return hose->sparse_mem_base;
+	case IOBASE_DENSE_MEM:
+		return hose->dense_mem_base;
+	case IOBASE_SPARSE_IO:
+		return hose->sparse_io_base;
+	case IOBASE_DENSE_IO:
+		return hose->dense_io_base;
+	case IOBASE_ROOT_BUS:
+		return hose->bus->number;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+/* Destroy an __iomem token.  Not copied from lib/iomap.c.  */
+
+void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
+{
+	if (__is_mmio(addr))
+		iounmap(addr);
+}
+
+EXPORT_SYMBOL(pci_iounmap);
+
+/* FIXME: Some boxes have multiple ISA bridges! */
+struct pci_dev *isa_bridge;
+EXPORT_SYMBOL(isa_bridge);
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
new file mode 100644
index 0000000000..18043af45e
--- /dev/null
+++ b/arch/alpha/kernel/pci_impl.h
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	linux/arch/alpha/kernel/pci_impl.h
+ *
+ * This file contains declarations and inline functions for interfacing
+ * with the PCI initialization routines.
+ */
+
+struct pci_dev;
+struct pci_controller;
+struct pci_iommu_arena;
+
+/*
+ * We can't just blindly use 64K for machines with EISA busses; they
+ * may also have PCI-PCI bridges present, and then we'd configure the
+ * bridge incorrectly.
+ *
+ * Also, we start at 0x8000 or 0x9000, in hopes to get all devices'
+ * IO space areas allocated *before* 0xC000; this is because certain
+ * BIOSes (Millennium for one) use PCI Config space "mechanism #2"
+ * accesses to probe the bus. If a device's registers appear at 0xC000,
+ * it may see an INx/OUTx at that address during BIOS emulation of the
+ * VGA BIOS, and some cards, notably Adaptec 2940UW, take mortal offense.
+ */
+
+#define EISA_DEFAULT_IO_BASE	0x9000	/* start above 8th slot */
+#define DEFAULT_IO_BASE		0x8000	/* start at 8th slot */
+
+/*
+ * We try to make the DEFAULT_MEM_BASE addresses *always* have more than
+ * a single bit set. This is so that devices like the broken Myrinet card
+ * will always have a PCI memory address that will never match a IDSEL
+ * address in PCI Config space, which can cause problems with early rev cards.
+ */
+
+/*
+ * An XL is AVANTI (APECS) family, *but* it has only 27 bits of ISA address
+ * that get passed through the PCI<->ISA bridge chip. Although this causes
+ * us to set the PCI->Mem window bases lower than normal, we still allocate
+ * PCI bus devices' memory addresses *below* the low DMA mapping window,
+ * and hope they fit below 64Mb (to avoid conflicts), and so that they can
+ * be accessed via SPARSE space.
+ *
+ * We accept the risk that a broken Myrinet card will be put into a true XL
+ * and thus can more easily run into the problem described below.
+ */
+#define XL_DEFAULT_MEM_BASE ((16+2)*1024*1024) /* 16M to 64M-1 is avail */
+
+/*
+ * APECS and LCA have only 34 bits for physical addresses, thus limiting PCI
+ * bus memory addresses for SPARSE access to be less than 128Mb.
+ */
+#define APECS_AND_LCA_DEFAULT_MEM_BASE ((16+2)*1024*1024)
+
+/*
+ * Because MCPCIA and T2 core logic support more bits for
+ * physical addresses, they should allow an expanded range of SPARSE
+ * memory addresses.  However, we do not use them all, in order to
+ * avoid the HAE manipulation that would be needed.
+ */
+#define MCPCIA_DEFAULT_MEM_BASE ((32+2)*1024*1024)
+#define T2_DEFAULT_MEM_BASE ((16+1)*1024*1024)
+
+/*
+ * Because CIA and PYXIS have more bits for physical addresses,
+ * they support an expanded range of SPARSE memory addresses.
+ */
+#define DEFAULT_MEM_BASE ((128+16)*1024*1024)
+
+/* ??? Experimenting with no HAE for CIA.  */
+#define CIA_DEFAULT_MEM_BASE ((32+2)*1024*1024)
+
+#define IRONGATE_DEFAULT_MEM_BASE ((256*8-16)*1024*1024)
+
+#define DEFAULT_AGP_APER_SIZE	(64*1024*1024)
+
+/* 
+ * A small note about bridges and interrupts.  The DECchip 21050 (and
+ * later) adheres to the PCI-PCI bridge specification.  This says that
+ * the interrupts on the other side of a bridge are swizzled in the
+ * following manner:
+ *
+ * Dev    Interrupt   Interrupt 
+ *        Pin on      Pin on 
+ *        Device      Connector
+ *
+ *   4    A           A
+ *        B           B
+ *        C           C
+ *        D           D
+ * 
+ *   5    A           B
+ *        B           C
+ *        C           D
+ *        D           A
+ *
+ *   6    A           C
+ *        B           D
+ *        C           A
+ *        D           B
+ *
+ *   7    A           D
+ *        B           A
+ *        C           B
+ *        D           C
+ *
+ *   Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
+ *   Thus, each swizzle is ((pin-1) + (device#-4)) % 4
+ *
+ *   pci_swizzle_interrupt_pin() swizzles for exactly one bridge.  The routine
+ *   pci_common_swizzle() handles multiple bridges.  But there are a
+ *   couple boards that do strange things.
+ */
+
+
+/* The following macro is used to implement the table-based irq mapping
+   function for all single-bus Alphas.  */
+
+#define COMMON_TABLE_LOOKUP						\
+({ long _ctl_ = -1; 							\
+   if (slot >= min_idsel && slot <= max_idsel && pin < irqs_per_slot)	\
+     _ctl_ = irq_tab[slot - min_idsel][pin];				\
+   _ctl_; })
+
+
+/* A PCI IOMMU allocation arena.  There are typically two of these
+   regions per bus.  */
+/* ??? The 8400 has a 32-byte pte entry, and the entire table apparently
+   lives directly on the host bridge (no tlb?).  We don't support this
+   machine, but if we ever did, we'd need to parameterize all this quite
+   a bit further.  Probably with per-bus operation tables.  */
+
+struct pci_iommu_arena
+{
+	spinlock_t lock;
+	struct pci_controller *hose;
+#define IOMMU_INVALID_PTE 0x2 /* 32:63 bits MBZ */
+#define IOMMU_RESERVED_PTE 0xface
+	unsigned long *ptes;
+	dma_addr_t dma_base;
+	unsigned int size;
+	unsigned int next_entry;
+	unsigned int align_entry;
+};
+
+#if defined(CONFIG_ALPHA_SRM) && \
+    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
+     defined(CONFIG_ALPHA_AVANTI))
+# define NEED_SRM_SAVE_RESTORE
+#else
+# undef NEED_SRM_SAVE_RESTORE
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(NEED_SRM_SAVE_RESTORE)
+# define ALPHA_RESTORE_SRM_SETUP
+#else
+# undef ALPHA_RESTORE_SRM_SETUP
+#endif
+
+#ifdef ALPHA_RESTORE_SRM_SETUP
+extern void pci_restore_srm_config(void);
+#else
+#define pci_restore_srm_config()	do {} while (0)
+#endif
+
+/* The hose list.  */
+extern struct pci_controller *hose_head, **hose_tail;
+extern struct pci_controller *pci_isa_hose;
+
+extern unsigned long alpha_agpgart_size;
+
+extern void common_init_pci(void);
+#define common_swizzle pci_common_swizzle
+extern struct pci_controller *alloc_pci_controller(void);
+extern struct resource *alloc_resource(void);
+
+extern struct pci_iommu_arena *iommu_arena_new_node(int,
+						    struct pci_controller *,
+					            dma_addr_t, unsigned long,
+					            unsigned long);
+extern struct pci_iommu_arena *iommu_arena_new(struct pci_controller *,
+					       dma_addr_t, unsigned long,
+					       unsigned long);
+extern const char *const pci_io_names[];
+extern const char *const pci_mem_names[];
+extern const char pci_hae0_name[];
+
+extern unsigned long size_for_memory(unsigned long max);
+
+extern int iommu_reserve(struct pci_iommu_arena *, long, long);
+extern int iommu_release(struct pci_iommu_arena *, long, long);
+extern int iommu_bind(struct pci_iommu_arena *, long, long, struct page **);
+extern int iommu_unbind(struct pci_iommu_arena *, long, long);
+
+
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
new file mode 100644
index 0000000000..c81183935e
--- /dev/null
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -0,0 +1,935 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/pci_iommu.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/gfp.h>
+#include <linux/memblock.h>
+#include <linux/export.h>
+#include <linux/scatterlist.h>
+#include <linux/log2.h>
+#include <linux/dma-map-ops.h>
+#include <linux/iommu-helper.h>
+
+#include <asm/io.h>
+#include <asm/hwrpb.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+
+#define DEBUG_ALLOC 0
+#if DEBUG_ALLOC > 0
+# define DBGA(args...)		printk(KERN_DEBUG args)
+#else
+# define DBGA(args...)
+#endif
+#if DEBUG_ALLOC > 1
+# define DBGA2(args...)		printk(KERN_DEBUG args)
+#else
+# define DBGA2(args...)
+#endif
+
+#define DEBUG_NODIRECT 0
+
+#define ISA_DMA_MASK		0x00ffffff
+
+static inline unsigned long
+mk_iommu_pte(unsigned long paddr)
+{
+	return (paddr >> (PAGE_SHIFT-1)) | 1;
+}
+
+/* Return the minimum of MAX or the first power of two larger
+   than main memory.  */
+
+unsigned long
+size_for_memory(unsigned long max)
+{
+	unsigned long mem = max_low_pfn << PAGE_SHIFT;
+	if (mem < max)
+		max = roundup_pow_of_two(mem);
+	return max;
+}
+
+struct pci_iommu_arena * __init
+iommu_arena_new_node(int nid, struct pci_controller *hose, dma_addr_t base,
+		     unsigned long window_size, unsigned long align)
+{
+	unsigned long mem_size;
+	struct pci_iommu_arena *arena;
+
+	mem_size = window_size / (PAGE_SIZE / sizeof(unsigned long));
+
+	/* Note that the TLB lookup logic uses bitwise concatenation,
+	   not addition, so the required arena alignment is based on
+	   the size of the window.  Retain the align parameter so that
+	   particular systems can over-align the arena.  */
+	if (align < mem_size)
+		align = mem_size;
+
+	arena = memblock_alloc(sizeof(*arena), SMP_CACHE_BYTES);
+	if (!arena)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(*arena));
+	arena->ptes = memblock_alloc(mem_size, align);
+	if (!arena->ptes)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, mem_size, align);
+
+	spin_lock_init(&arena->lock);
+	arena->hose = hose;
+	arena->dma_base = base;
+	arena->size = window_size;
+	arena->next_entry = 0;
+
+	/* Align allocations to a multiple of a page size.  Not needed
+	   unless there are chip bugs.  */
+	arena->align_entry = 1;
+
+	return arena;
+}
+
+struct pci_iommu_arena * __init
+iommu_arena_new(struct pci_controller *hose, dma_addr_t base,
+		unsigned long window_size, unsigned long align)
+{
+	return iommu_arena_new_node(0, hose, base, window_size, align);
+}
+
+/* Must be called with the arena lock held */
+static long
+iommu_arena_find_pages(struct device *dev, struct pci_iommu_arena *arena,
+		       long n, long mask)
+{
+	unsigned long *ptes;
+	long i, p, nent;
+	int pass = 0;
+	unsigned long base;
+	unsigned long boundary_size;
+
+	base = arena->dma_base >> PAGE_SHIFT;
+	boundary_size = dma_get_seg_boundary_nr_pages(dev, PAGE_SHIFT);
+
+	/* Search forward for the first mask-aligned sequence of N free ptes */
+	ptes = arena->ptes;
+	nent = arena->size >> PAGE_SHIFT;
+	p = ALIGN(arena->next_entry, mask + 1);
+	i = 0;
+
+again:
+	while (i < n && p+i < nent) {
+		if (!i && iommu_is_span_boundary(p, n, base, boundary_size)) {
+			p = ALIGN(p + 1, mask + 1);
+			goto again;
+		}
+
+		if (ptes[p+i]) {
+			p = ALIGN(p + i + 1, mask + 1);
+			i = 0;
+		} else {
+			i = i + 1;
+		}
+	}
+
+	if (i < n) {
+		if (pass < 1) {
+			/*
+			 * Reached the end.  Flush the TLB and restart
+			 * the search from the beginning.
+			*/
+			alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
+
+			pass++;
+			p = 0;
+			i = 0;
+			goto again;
+		} else
+			return -1;
+	}
+
+	/* Success. It's the responsibility of the caller to mark them
+	   in use before releasing the lock */
+	return p;
+}
+
+static long
+iommu_arena_alloc(struct device *dev, struct pci_iommu_arena *arena, long n,
+		  unsigned int align)
+{
+	unsigned long flags;
+	unsigned long *ptes;
+	long i, p, mask;
+
+	spin_lock_irqsave(&arena->lock, flags);
+
+	/* Search for N empty ptes */
+	ptes = arena->ptes;
+	mask = max(align, arena->align_entry) - 1;
+	p = iommu_arena_find_pages(dev, arena, n, mask);
+	if (p < 0) {
+		spin_unlock_irqrestore(&arena->lock, flags);
+		return -1;
+	}
+
+	/* Success.  Mark them all in use, ie not zero and invalid
+	   for the iommu tlb that could load them from under us.
+	   The chip specific bits will fill this in with something
+	   kosher when we return.  */
+	for (i = 0; i < n; ++i)
+		ptes[p+i] = IOMMU_INVALID_PTE;
+
+	arena->next_entry = p + n;
+	spin_unlock_irqrestore(&arena->lock, flags);
+
+	return p;
+}
+
+static void
+iommu_arena_free(struct pci_iommu_arena *arena, long ofs, long n)
+{
+	unsigned long *p;
+	long i;
+
+	p = arena->ptes + ofs;
+	for (i = 0; i < n; ++i)
+		p[i] = 0;
+}
+
+/*
+ * True if the machine supports DAC addressing, and DEV can
+ * make use of it given MASK.
+ */
+static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
+{
+	dma_addr_t dac_offset = alpha_mv.pci_dac_offset;
+	int ok = 1;
+
+	/* If this is not set, the machine doesn't support DAC at all.  */
+	if (dac_offset == 0)
+		ok = 0;
+
+	/* The device has to be able to address our DAC bit.  */
+	if ((dac_offset & dev->dma_mask) != dac_offset)
+		ok = 0;
+
+	/* If both conditions above are met, we are fine. */
+	DBGA("pci_dac_dma_supported %s from %ps\n",
+	     ok ? "yes" : "no", __builtin_return_address(0));
+
+	return ok;
+}
+
+/* Map a single buffer of the indicated size for PCI DMA in streaming
+   mode.  The 32-bit PCI bus mastering address to use is returned.
+   Once the device is given the dma address, the device owns this memory
+   until either pci_unmap_single or pci_dma_sync_single is performed.  */
+
+static dma_addr_t
+pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
+		 int dac_allowed)
+{
+	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
+	dma_addr_t max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
+	struct pci_iommu_arena *arena;
+	long npages, dma_ofs, i;
+	unsigned long paddr;
+	dma_addr_t ret;
+	unsigned int align = 0;
+	struct device *dev = pdev ? &pdev->dev : NULL;
+
+	paddr = __pa(cpu_addr);
+
+#if !DEBUG_NODIRECT
+	/* First check to see if we can use the direct map window.  */
+	if (paddr + size + __direct_map_base - 1 <= max_dma
+	    && paddr + size <= __direct_map_size) {
+		ret = paddr + __direct_map_base;
+
+		DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %ps\n",
+		      cpu_addr, size, ret, __builtin_return_address(0));
+
+		return ret;
+	}
+#endif
+
+	/* Next, use DAC if selected earlier.  */
+	if (dac_allowed) {
+		ret = paddr + alpha_mv.pci_dac_offset;
+
+		DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %ps\n",
+		      cpu_addr, size, ret, __builtin_return_address(0));
+
+		return ret;
+	}
+
+	/* If the machine doesn't define a pci_tbi routine, we have to
+	   assume it doesn't support sg mapping, and, since we tried to
+	   use direct_map above, it now must be considered an error. */
+	if (! alpha_mv.mv_pci_tbi) {
+		printk_once(KERN_WARNING "pci_map_single: no HW sg\n");
+		return DMA_MAPPING_ERROR;
+	}
+
+	arena = hose->sg_pci;
+	if (!arena || arena->dma_base + arena->size - 1 > max_dma)
+		arena = hose->sg_isa;
+
+	npages = iommu_num_pages(paddr, size, PAGE_SIZE);
+
+	/* Force allocation to 64KB boundary for ISA bridges. */
+	if (pdev && pdev == isa_bridge)
+		align = 8;
+	dma_ofs = iommu_arena_alloc(dev, arena, npages, align);
+	if (dma_ofs < 0) {
+		printk(KERN_WARNING "pci_map_single failed: "
+		       "could not allocate dma page tables\n");
+		return DMA_MAPPING_ERROR;
+	}
+
+	paddr &= PAGE_MASK;
+	for (i = 0; i < npages; ++i, paddr += PAGE_SIZE)
+		arena->ptes[i + dma_ofs] = mk_iommu_pte(paddr);
+
+	ret = arena->dma_base + dma_ofs * PAGE_SIZE;
+	ret += (unsigned long)cpu_addr & ~PAGE_MASK;
+
+	DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %ps\n",
+	      cpu_addr, size, npages, ret, __builtin_return_address(0));
+
+	return ret;
+}
+
+/* Helper for generic DMA-mapping functions. */
+static struct pci_dev *alpha_gendev_to_pci(struct device *dev)
+{
+	if (dev && dev_is_pci(dev))
+		return to_pci_dev(dev);
+
+	/* Assume that non-PCI devices asking for DMA are either ISA or EISA,
+	   BUG() otherwise. */
+	BUG_ON(!isa_bridge);
+
+	/* Assume non-busmaster ISA DMA when dma_mask is not set (the ISA
+	   bridge is bus master then). */
+	if (!dev || !dev->dma_mask || !*dev->dma_mask)
+		return isa_bridge;
+
+	/* For EISA bus masters, return isa_bridge (it might have smaller
+	   dma_mask due to wiring limitations). */
+	if (*dev->dma_mask >= isa_bridge->dma_mask)
+		return isa_bridge;
+
+	/* This assumes ISA bus master with dma_mask 0xffffff. */
+	return NULL;
+}
+
+static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
+				     unsigned long offset, size_t size,
+				     enum dma_data_direction dir,
+				     unsigned long attrs)
+{
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
+	int dac_allowed;
+
+	BUG_ON(dir == DMA_NONE);
+
+	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
+	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
+				size, dac_allowed);
+}
+
+/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
+   SIZE must match what was provided for in a previous pci_map_single
+   call.  All other usages are undefined.  After this call, reads by
+   the cpu to the buffer are guaranteed to see whatever the device
+   wrote there.  */
+
+static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
+				 size_t size, enum dma_data_direction dir,
+				 unsigned long attrs)
+{
+	unsigned long flags;
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
+	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
+	struct pci_iommu_arena *arena;
+	long dma_ofs, npages;
+
+	BUG_ON(dir == DMA_NONE);
+
+	if (dma_addr >= __direct_map_base
+	    && dma_addr < __direct_map_base + __direct_map_size) {
+		/* Nothing to do.  */
+
+		DBGA2("pci_unmap_single: direct [%llx,%zx] from %ps\n",
+		      dma_addr, size, __builtin_return_address(0));
+
+		return;
+	}
+
+	if (dma_addr > 0xffffffff) {
+		DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %ps\n",
+		      dma_addr, size, __builtin_return_address(0));
+		return;
+	}
+
+	arena = hose->sg_pci;
+	if (!arena || dma_addr < arena->dma_base)
+		arena = hose->sg_isa;
+
+	dma_ofs = (dma_addr - arena->dma_base) >> PAGE_SHIFT;
+	if (dma_ofs * PAGE_SIZE >= arena->size) {
+		printk(KERN_ERR "Bogus pci_unmap_single: dma_addr %llx "
+		       " base %llx size %x\n",
+		       dma_addr, arena->dma_base, arena->size);
+		return;
+		BUG();
+	}
+
+	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
+
+	spin_lock_irqsave(&arena->lock, flags);
+
+	iommu_arena_free(arena, dma_ofs, npages);
+
+        /* If we're freeing ptes above the `next_entry' pointer (they
+           may have snuck back into the TLB since the last wrap flush),
+           we need to flush the TLB before reallocating the latter.  */
+	if (dma_ofs >= arena->next_entry)
+		alpha_mv.mv_pci_tbi(hose, dma_addr, dma_addr + size - 1);
+
+	spin_unlock_irqrestore(&arena->lock, flags);
+
+	DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %ps\n",
+	      dma_addr, size, npages, __builtin_return_address(0));
+}
+
+/* Allocate and map kernel buffer using consistent mode DMA for PCI
+   device.  Returns non-NULL cpu-view pointer to the buffer if
+   successful and sets *DMA_ADDRP to the pci side dma address as well,
+   else DMA_ADDRP is undefined.  */
+
+static void *alpha_pci_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_addrp, gfp_t gfp,
+				      unsigned long attrs)
+{
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
+	void *cpu_addr;
+	long order = get_order(size);
+
+	gfp &= ~GFP_DMA;
+
+try_again:
+	cpu_addr = (void *)__get_free_pages(gfp | __GFP_ZERO, order);
+	if (! cpu_addr) {
+		printk(KERN_INFO "pci_alloc_consistent: "
+		       "get_free_pages failed from %ps\n",
+			__builtin_return_address(0));
+		/* ??? Really atomic allocation?  Otherwise we could play
+		   with vmalloc and sg if we can't find contiguous memory.  */
+		return NULL;
+	}
+	memset(cpu_addr, 0, size);
+
+	*dma_addrp = pci_map_single_1(pdev, cpu_addr, size, 0);
+	if (*dma_addrp == DMA_MAPPING_ERROR) {
+		free_pages((unsigned long)cpu_addr, order);
+		if (alpha_mv.mv_pci_tbi || (gfp & GFP_DMA))
+			return NULL;
+		/* The address doesn't fit required mask and we
+		   do not have iommu. Try again with GFP_DMA. */
+		gfp |= GFP_DMA;
+		goto try_again;
+	}
+
+	DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %ps\n",
+	      size, cpu_addr, *dma_addrp, __builtin_return_address(0));
+
+	return cpu_addr;
+}
+
+/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
+   be values that were returned from pci_alloc_consistent.  SIZE must
+   be the same as what as passed into pci_alloc_consistent.
+   References to the memory and mappings associated with CPU_ADDR or
+   DMA_ADDR past this call are illegal.  */
+
+static void alpha_pci_free_coherent(struct device *dev, size_t size,
+				    void *cpu_addr, dma_addr_t dma_addr,
+				    unsigned long attrs)
+{
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
+	dma_unmap_single(&pdev->dev, dma_addr, size, DMA_BIDIRECTIONAL);
+	free_pages((unsigned long)cpu_addr, get_order(size));
+
+	DBGA2("pci_free_consistent: [%llx,%zx] from %ps\n",
+	      dma_addr, size, __builtin_return_address(0));
+}
+
+/* Classify the elements of the scatterlist.  Write dma_address
+   of each element with:
+	0   : Followers all physically adjacent.
+	1   : Followers all virtually adjacent.
+	-1  : Not leader, physically adjacent to previous.
+	-2  : Not leader, virtually adjacent to previous.
+   Write dma_length of each leader with the combined lengths of
+   the mergable followers.  */
+
+#define SG_ENT_VIRT_ADDRESS(SG) (sg_virt((SG)))
+#define SG_ENT_PHYS_ADDRESS(SG) __pa(SG_ENT_VIRT_ADDRESS(SG))
+
+static void
+sg_classify(struct device *dev, struct scatterlist *sg, struct scatterlist *end,
+	    int virt_ok)
+{
+	unsigned long next_paddr;
+	struct scatterlist *leader;
+	long leader_flag, leader_length;
+	unsigned int max_seg_size;
+
+	leader = sg;
+	leader_flag = 0;
+	leader_length = leader->length;
+	next_paddr = SG_ENT_PHYS_ADDRESS(leader) + leader_length;
+
+	/* we will not marge sg without device. */
+	max_seg_size = dev ? dma_get_max_seg_size(dev) : 0;
+	for (++sg; sg < end; ++sg) {
+		unsigned long addr, len;
+		addr = SG_ENT_PHYS_ADDRESS(sg);
+		len = sg->length;
+
+		if (leader_length + len > max_seg_size)
+			goto new_segment;
+
+		if (next_paddr == addr) {
+			sg->dma_address = -1;
+			leader_length += len;
+		} else if (((next_paddr | addr) & ~PAGE_MASK) == 0 && virt_ok) {
+			sg->dma_address = -2;
+			leader_flag = 1;
+			leader_length += len;
+		} else {
+new_segment:
+			leader->dma_address = leader_flag;
+			leader->dma_length = leader_length;
+			leader = sg;
+			leader_flag = 0;
+			leader_length = len;
+		}
+
+		next_paddr = addr + len;
+	}
+
+	leader->dma_address = leader_flag;
+	leader->dma_length = leader_length;
+}
+
+/* Given a scatterlist leader, choose an allocation method and fill
+   in the blanks.  */
+
+static int
+sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
+	struct scatterlist *out, struct pci_iommu_arena *arena,
+	dma_addr_t max_dma, int dac_allowed)
+{
+	unsigned long paddr = SG_ENT_PHYS_ADDRESS(leader);
+	long size = leader->dma_length;
+	struct scatterlist *sg;
+	unsigned long *ptes;
+	long npages, dma_ofs, i;
+
+#if !DEBUG_NODIRECT
+	/* If everything is physically contiguous, and the addresses
+	   fall into the direct-map window, use it.  */
+	if (leader->dma_address == 0
+	    && paddr + size + __direct_map_base - 1 <= max_dma
+	    && paddr + size <= __direct_map_size) {
+		out->dma_address = paddr + __direct_map_base;
+		out->dma_length = size;
+
+		DBGA("    sg_fill: [%p,%lx] -> direct %llx\n",
+		     __va(paddr), size, out->dma_address);
+
+		return 0;
+	}
+#endif
+
+	/* If physically contiguous and DAC is available, use it.  */
+	if (leader->dma_address == 0 && dac_allowed) {
+		out->dma_address = paddr + alpha_mv.pci_dac_offset;
+		out->dma_length = size;
+
+		DBGA("    sg_fill: [%p,%lx] -> DAC %llx\n",
+		     __va(paddr), size, out->dma_address);
+
+		return 0;
+	}
+
+	/* Otherwise, we'll use the iommu to make the pages virtually
+	   contiguous.  */
+
+	paddr &= ~PAGE_MASK;
+	npages = iommu_num_pages(paddr, size, PAGE_SIZE);
+	dma_ofs = iommu_arena_alloc(dev, arena, npages, 0);
+	if (dma_ofs < 0) {
+		/* If we attempted a direct map above but failed, die.  */
+		if (leader->dma_address == 0)
+			return -1;
+
+		/* Otherwise, break up the remaining virtually contiguous
+		   hunks into individual direct maps and retry.  */
+		sg_classify(dev, leader, end, 0);
+		return sg_fill(dev, leader, end, out, arena, max_dma, dac_allowed);
+	}
+
+	out->dma_address = arena->dma_base + dma_ofs*PAGE_SIZE + paddr;
+	out->dma_length = size;
+
+	DBGA("    sg_fill: [%p,%lx] -> sg %llx np %ld\n",
+	     __va(paddr), size, out->dma_address, npages);
+
+	/* All virtually contiguous.  We need to find the length of each
+	   physically contiguous subsegment to fill in the ptes.  */
+	ptes = &arena->ptes[dma_ofs];
+	sg = leader;
+	do {
+#if DEBUG_ALLOC > 0
+		struct scatterlist *last_sg = sg;
+#endif
+
+		size = sg->length;
+		paddr = SG_ENT_PHYS_ADDRESS(sg);
+
+		while (sg+1 < end && (int) sg[1].dma_address == -1) {
+			size += sg[1].length;
+			sg = sg_next(sg);
+		}
+
+		npages = iommu_num_pages(paddr, size, PAGE_SIZE);
+
+		paddr &= PAGE_MASK;
+		for (i = 0; i < npages; ++i, paddr += PAGE_SIZE)
+			*ptes++ = mk_iommu_pte(paddr);
+
+#if DEBUG_ALLOC > 0
+		DBGA("    (%ld) [%p,%x] np %ld\n",
+		     last_sg - leader, SG_ENT_VIRT_ADDRESS(last_sg),
+		     last_sg->length, npages);
+		while (++last_sg <= sg) {
+			DBGA("        (%ld) [%p,%x] cont\n",
+			     last_sg - leader, SG_ENT_VIRT_ADDRESS(last_sg),
+			     last_sg->length);
+		}
+#endif
+	} while (++sg < end && (int) sg->dma_address < 0);
+
+	return 1;
+}
+
+static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
+			    int nents, enum dma_data_direction dir,
+			    unsigned long attrs)
+{
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
+	struct scatterlist *start, *end, *out;
+	struct pci_controller *hose;
+	struct pci_iommu_arena *arena;
+	dma_addr_t max_dma;
+	int dac_allowed;
+
+	BUG_ON(dir == DMA_NONE);
+
+	dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
+
+	/* Fast path single entry scatterlists.  */
+	if (nents == 1) {
+		sg->dma_length = sg->length;
+		sg->dma_address
+		  = pci_map_single_1(pdev, SG_ENT_VIRT_ADDRESS(sg),
+				     sg->length, dac_allowed);
+		if (sg->dma_address == DMA_MAPPING_ERROR)
+			return -EIO;
+		return 1;
+	}
+
+	start = sg;
+	end = sg + nents;
+
+	/* First, prepare information about the entries.  */
+	sg_classify(dev, sg, end, alpha_mv.mv_pci_tbi != 0);
+
+	/* Second, figure out where we're going to map things.  */
+	if (alpha_mv.mv_pci_tbi) {
+		hose = pdev ? pdev->sysdata : pci_isa_hose;
+		max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
+		arena = hose->sg_pci;
+		if (!arena || arena->dma_base + arena->size - 1 > max_dma)
+			arena = hose->sg_isa;
+	} else {
+		max_dma = -1;
+		arena = NULL;
+		hose = NULL;
+	}
+
+	/* Third, iterate over the scatterlist leaders and allocate
+	   dma space as needed.  */
+	for (out = sg; sg < end; ++sg) {
+		if ((int) sg->dma_address < 0)
+			continue;
+		if (sg_fill(dev, sg, end, out, arena, max_dma, dac_allowed) < 0)
+			goto error;
+		out++;
+	}
+
+	/* Mark the end of the list for pci_unmap_sg.  */
+	if (out < end)
+		out->dma_length = 0;
+
+	if (out - start == 0) {
+		printk(KERN_WARNING "pci_map_sg failed: no entries?\n");
+		return -ENOMEM;
+	}
+	DBGA("pci_map_sg: %ld entries\n", out - start);
+
+	return out - start;
+
+ error:
+	printk(KERN_WARNING "pci_map_sg failed: "
+	       "could not allocate dma page tables\n");
+
+	/* Some allocation failed while mapping the scatterlist
+	   entries.  Unmap them now.  */
+	if (out > start)
+		dma_unmap_sg(&pdev->dev, start, out - start, dir);
+	return -ENOMEM;
+}
+
+/* Unmap a set of streaming mode DMA translations.  Again, cpu read
+   rules concerning calls here are the same as for pci_unmap_single()
+   above.  */
+
+static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
+			       int nents, enum dma_data_direction dir,
+			       unsigned long attrs)
+{
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
+	unsigned long flags;
+	struct pci_controller *hose;
+	struct pci_iommu_arena *arena;
+	struct scatterlist *end;
+	dma_addr_t max_dma;
+	dma_addr_t fbeg, fend;
+
+	BUG_ON(dir == DMA_NONE);
+
+	if (! alpha_mv.mv_pci_tbi)
+		return;
+
+	hose = pdev ? pdev->sysdata : pci_isa_hose;
+	max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
+	arena = hose->sg_pci;
+	if (!arena || arena->dma_base + arena->size - 1 > max_dma)
+		arena = hose->sg_isa;
+
+	fbeg = -1, fend = 0;
+
+	spin_lock_irqsave(&arena->lock, flags);
+
+	for (end = sg + nents; sg < end; ++sg) {
+		dma_addr_t addr;
+		size_t size;
+		long npages, ofs;
+		dma_addr_t tend;
+
+		addr = sg->dma_address;
+		size = sg->dma_length;
+		if (!size)
+			break;
+
+		if (addr > 0xffffffff) {
+			/* It's a DAC address -- nothing to do.  */
+			DBGA("    (%ld) DAC [%llx,%zx]\n",
+			      sg - end + nents, addr, size);
+			continue;
+		}
+
+		if (addr >= __direct_map_base
+		    && addr < __direct_map_base + __direct_map_size) {
+			/* Nothing to do.  */
+			DBGA("    (%ld) direct [%llx,%zx]\n",
+			      sg - end + nents, addr, size);
+			continue;
+		}
+
+		DBGA("    (%ld) sg [%llx,%zx]\n",
+		     sg - end + nents, addr, size);
+
+		npages = iommu_num_pages(addr, size, PAGE_SIZE);
+		ofs = (addr - arena->dma_base) >> PAGE_SHIFT;
+		iommu_arena_free(arena, ofs, npages);
+
+		tend = addr + size - 1;
+		if (fbeg > addr) fbeg = addr;
+		if (fend < tend) fend = tend;
+	}
+
+        /* If we're freeing ptes above the `next_entry' pointer (they
+           may have snuck back into the TLB since the last wrap flush),
+           we need to flush the TLB before reallocating the latter.  */
+	if ((fend - arena->dma_base) >> PAGE_SHIFT >= arena->next_entry)
+		alpha_mv.mv_pci_tbi(hose, fbeg, fend);
+
+	spin_unlock_irqrestore(&arena->lock, flags);
+
+	DBGA("pci_unmap_sg: %ld entries\n", nents - (end - sg));
+}
+
+/* Return whether the given PCI device DMA address mask can be
+   supported properly.  */
+
+static int alpha_pci_supported(struct device *dev, u64 mask)
+{
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
+	struct pci_controller *hose;
+	struct pci_iommu_arena *arena;
+
+	/* If there exists a direct map, and the mask fits either
+	   the entire direct mapped space or the total system memory as
+	   shifted by the map base */
+	if (__direct_map_size != 0
+	    && (__direct_map_base + __direct_map_size - 1 <= mask ||
+		__direct_map_base + (max_low_pfn << PAGE_SHIFT) - 1 <= mask))
+		return 1;
+
+	/* Check that we have a scatter-gather arena that fits.  */
+	hose = pdev ? pdev->sysdata : pci_isa_hose;
+	arena = hose->sg_isa;
+	if (arena && arena->dma_base + arena->size - 1 <= mask)
+		return 1;
+	arena = hose->sg_pci;
+	if (arena && arena->dma_base + arena->size - 1 <= mask)
+		return 1;
+
+	/* As last resort try ZONE_DMA.  */
+	if (!__direct_map_base && MAX_DMA_ADDRESS - IDENT_ADDR - 1 <= mask)
+		return 1;
+
+	return 0;
+}
+
+
+/*
+ * AGP GART extensions to the IOMMU
+ */
+int
+iommu_reserve(struct pci_iommu_arena *arena, long pg_count, long align_mask) 
+{
+	unsigned long flags;
+	unsigned long *ptes;
+	long i, p;
+
+	if (!arena) return -EINVAL;
+
+	spin_lock_irqsave(&arena->lock, flags);
+
+	/* Search for N empty ptes.  */
+	ptes = arena->ptes;
+	p = iommu_arena_find_pages(NULL, arena, pg_count, align_mask);
+	if (p < 0) {
+		spin_unlock_irqrestore(&arena->lock, flags);
+		return -1;
+	}
+
+	/* Success.  Mark them all reserved (ie not zero and invalid)
+	   for the iommu tlb that could load them from under us.
+	   They will be filled in with valid bits by _bind() */
+	for (i = 0; i < pg_count; ++i)
+		ptes[p+i] = IOMMU_RESERVED_PTE;
+
+	arena->next_entry = p + pg_count;
+	spin_unlock_irqrestore(&arena->lock, flags);
+
+	return p;
+}
+
+int 
+iommu_release(struct pci_iommu_arena *arena, long pg_start, long pg_count)
+{
+	unsigned long *ptes;
+	long i;
+
+	if (!arena) return -EINVAL;
+
+	ptes = arena->ptes;
+
+	/* Make sure they're all reserved first... */
+	for(i = pg_start; i < pg_start + pg_count; i++)
+		if (ptes[i] != IOMMU_RESERVED_PTE)
+			return -EBUSY;
+
+	iommu_arena_free(arena, pg_start, pg_count);
+	return 0;
+}
+
+int
+iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count, 
+	   struct page **pages)
+{
+	unsigned long flags;
+	unsigned long *ptes;
+	long i, j;
+
+	if (!arena) return -EINVAL;
+	
+	spin_lock_irqsave(&arena->lock, flags);
+
+	ptes = arena->ptes;
+
+	for(j = pg_start; j < pg_start + pg_count; j++) {
+		if (ptes[j] != IOMMU_RESERVED_PTE) {
+			spin_unlock_irqrestore(&arena->lock, flags);
+			return -EBUSY;
+		}
+	}
+		
+	for(i = 0, j = pg_start; i < pg_count; i++, j++)
+		ptes[j] = mk_iommu_pte(page_to_phys(pages[i]));
+
+	spin_unlock_irqrestore(&arena->lock, flags);
+
+	return 0;
+}
+
+int
+iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count)
+{
+	unsigned long *p;
+	long i;
+
+	if (!arena) return -EINVAL;
+
+	p = arena->ptes + pg_start;
+	for(i = 0; i < pg_count; i++)
+		p[i] = IOMMU_RESERVED_PTE;
+
+	return 0;
+}
+
+const struct dma_map_ops alpha_pci_ops = {
+	.alloc			= alpha_pci_alloc_coherent,
+	.free			= alpha_pci_free_coherent,
+	.map_page		= alpha_pci_map_page,
+	.unmap_page		= alpha_pci_unmap_page,
+	.map_sg			= alpha_pci_map_sg,
+	.unmap_sg		= alpha_pci_unmap_sg,
+	.dma_supported		= alpha_pci_supported,
+	.mmap			= dma_common_mmap,
+	.get_sgtable		= dma_common_get_sgtable,
+	.alloc_pages		= dma_common_alloc_pages,
+	.free_pages		= dma_common_free_pages,
+};
+EXPORT_SYMBOL(alpha_pci_ops);
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
new file mode 100644
index 0000000000..ccdb508c15
--- /dev/null
+++ b/arch/alpha/kernel/perf_event.c
@@ -0,0 +1,895 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardware performance events for the Alpha.
+ *
+ * We implement HW counts on the EV67 and subsequent CPUs only.
+ *
+ * (C) 2010 Michael J. Cree
+ *
+ * Somewhat based on the Sparc code, and to a lesser extent the PowerPC and
+ * ARM code, which are copyright by their respective authors.
+ */
+
+#include <linux/perf_event.h>
+#include <linux/kprobes.h>
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/mutex.h>
+#include <linux/init.h>
+
+#include <asm/hwrpb.h>
+#include <linux/atomic.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/pal.h>
+#include <asm/wrperfmon.h>
+#include <asm/hw_irq.h>
+
+
+/* The maximum number of PMCs on any Alpha CPU whatsoever. */
+#define MAX_HWEVENTS 3
+#define PMC_NO_INDEX -1
+
+/* For tracking PMCs and the hw events they monitor on each CPU. */
+struct cpu_hw_events {
+	int			enabled;
+	/* Number of events scheduled; also number entries valid in arrays below. */
+	int			n_events;
+	/* Number events added since last hw_perf_disable(). */
+	int			n_added;
+	/* Events currently scheduled. */
+	struct perf_event	*event[MAX_HWEVENTS];
+	/* Event type of each scheduled event. */
+	unsigned long		evtype[MAX_HWEVENTS];
+	/* Current index of each scheduled event; if not yet determined
+	 * contains PMC_NO_INDEX.
+	 */
+	int			current_idx[MAX_HWEVENTS];
+	/* The active PMCs' config for easy use with wrperfmon(). */
+	unsigned long		config;
+	/* The active counters' indices for easy use with wrperfmon(). */
+	unsigned long		idx_mask;
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+
+
+/*
+ * A structure to hold the description of the PMCs available on a particular
+ * type of Alpha CPU.
+ */
+struct alpha_pmu_t {
+	/* Mapping of the perf system hw event types to indigenous event types */
+	const int *event_map;
+	/* The number of entries in the event_map */
+	int  max_events;
+	/* The number of PMCs on this Alpha */
+	int  num_pmcs;
+	/*
+	 * All PMC counters reside in the IBOX register PCTR.  This is the
+	 * LSB of the counter.
+	 */
+	int  pmc_count_shift[MAX_HWEVENTS];
+	/*
+	 * The mask that isolates the PMC bits when the LSB of the counter
+	 * is shifted to bit 0.
+	 */
+	unsigned long pmc_count_mask[MAX_HWEVENTS];
+	/* The maximum period the PMC can count. */
+	unsigned long pmc_max_period[MAX_HWEVENTS];
+	/*
+	 * The maximum value that may be written to the counter due to
+	 * hardware restrictions is pmc_max_period - pmc_left.
+	 */
+	long pmc_left[3];
+	 /* Subroutine for allocation of PMCs.  Enforces constraints. */
+	int (*check_constraints)(struct perf_event **, unsigned long *, int);
+	/* Subroutine for checking validity of a raw event for this PMU. */
+	int (*raw_event_valid)(u64 config);
+};
+
+/*
+ * The Alpha CPU PMU description currently in operation.  This is set during
+ * the boot process to the specific CPU of the machine.
+ */
+static const struct alpha_pmu_t *alpha_pmu;
+
+
+#define HW_OP_UNSUPPORTED -1
+
+/*
+ * The hardware description of the EV67, EV68, EV69, EV7 and EV79 PMUs
+ * follow. Since they are identical we refer to them collectively as the
+ * EV67 henceforth.
+ */
+
+/*
+ * EV67 PMC event types
+ *
+ * There is no one-to-one mapping of the possible hw event types to the
+ * actual codes that are used to program the PMCs hence we introduce our
+ * own hw event type identifiers.
+ */
+enum ev67_pmc_event_type {
+	EV67_CYCLES = 1,
+	EV67_INSTRUCTIONS,
+	EV67_BCACHEMISS,
+	EV67_MBOXREPLAY,
+	EV67_LAST_ET
+};
+#define EV67_NUM_EVENT_TYPES (EV67_LAST_ET-EV67_CYCLES)
+
+
+/* Mapping of the hw event types to the perf tool interface */
+static const int ev67_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	 = EV67_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	 = EV67_INSTRUCTIONS,
+	[PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	 = EV67_BCACHEMISS,
+};
+
+struct ev67_mapping_t {
+	int config;
+	int idx;
+};
+
+/*
+ * The mapping used for one event only - these must be in same order as enum
+ * ev67_pmc_event_type definition.
+ */
+static const struct ev67_mapping_t ev67_mapping[] = {
+	{EV67_PCTR_INSTR_CYCLES, 1},	 /* EV67_CYCLES, */
+	{EV67_PCTR_INSTR_CYCLES, 0},	 /* EV67_INSTRUCTIONS */
+	{EV67_PCTR_INSTR_BCACHEMISS, 1}, /* EV67_BCACHEMISS */
+	{EV67_PCTR_CYCLES_MBOX, 1}	 /* EV67_MBOXREPLAY */
+};
+
+
+/*
+ * Check that a group of events can be simultaneously scheduled on to the
+ * EV67 PMU.  Also allocate counter indices and config.
+ */
+static int ev67_check_constraints(struct perf_event **event,
+				unsigned long *evtype, int n_ev)
+{
+	int idx0;
+	unsigned long config;
+
+	idx0 = ev67_mapping[evtype[0]-1].idx;
+	config = ev67_mapping[evtype[0]-1].config;
+	if (n_ev == 1)
+		goto success;
+
+	BUG_ON(n_ev != 2);
+
+	if (evtype[0] == EV67_MBOXREPLAY || evtype[1] == EV67_MBOXREPLAY) {
+		/* MBOX replay traps must be on PMC 1 */
+		idx0 = (evtype[0] == EV67_MBOXREPLAY) ? 1 : 0;
+		/* Only cycles can accompany MBOX replay traps */
+		if (evtype[idx0] == EV67_CYCLES) {
+			config = EV67_PCTR_CYCLES_MBOX;
+			goto success;
+		}
+	}
+
+	if (evtype[0] == EV67_BCACHEMISS || evtype[1] == EV67_BCACHEMISS) {
+		/* Bcache misses must be on PMC 1 */
+		idx0 = (evtype[0] == EV67_BCACHEMISS) ? 1 : 0;
+		/* Only instructions can accompany Bcache misses */
+		if (evtype[idx0] == EV67_INSTRUCTIONS) {
+			config = EV67_PCTR_INSTR_BCACHEMISS;
+			goto success;
+		}
+	}
+
+	if (evtype[0] == EV67_INSTRUCTIONS || evtype[1] == EV67_INSTRUCTIONS) {
+		/* Instructions must be on PMC 0 */
+		idx0 = (evtype[0] == EV67_INSTRUCTIONS) ? 0 : 1;
+		/* By this point only cycles can accompany instructions */
+		if (evtype[idx0^1] == EV67_CYCLES) {
+			config = EV67_PCTR_INSTR_CYCLES;
+			goto success;
+		}
+	}
+
+	/* Otherwise, darn it, there is a conflict.  */
+	return -1;
+
+success:
+	event[0]->hw.idx = idx0;
+	event[0]->hw.config_base = config;
+	if (n_ev == 2) {
+		event[1]->hw.idx = idx0 ^ 1;
+		event[1]->hw.config_base = config;
+	}
+	return 0;
+}
+
+
+static int ev67_raw_event_valid(u64 config)
+{
+	return config >= EV67_CYCLES && config < EV67_LAST_ET;
+};
+
+
+static const struct alpha_pmu_t ev67_pmu = {
+	.event_map = ev67_perfmon_event_map,
+	.max_events = ARRAY_SIZE(ev67_perfmon_event_map),
+	.num_pmcs = 2,
+	.pmc_count_shift = {EV67_PCTR_0_COUNT_SHIFT, EV67_PCTR_1_COUNT_SHIFT, 0},
+	.pmc_count_mask = {EV67_PCTR_0_COUNT_MASK,  EV67_PCTR_1_COUNT_MASK,  0},
+	.pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0},
+	.pmc_left = {16, 4, 0},
+	.check_constraints = ev67_check_constraints,
+	.raw_event_valid = ev67_raw_event_valid,
+};
+
+
+
+/*
+ * Helper routines to ensure that we read/write only the correct PMC bits
+ * when calling the wrperfmon PALcall.
+ */
+static inline void alpha_write_pmc(int idx, unsigned long val)
+{
+	val &= alpha_pmu->pmc_count_mask[idx];
+	val <<= alpha_pmu->pmc_count_shift[idx];
+	val |= (1<<idx);
+	wrperfmon(PERFMON_CMD_WRITE, val);
+}
+
+static inline unsigned long alpha_read_pmc(int idx)
+{
+	unsigned long val;
+
+	val = wrperfmon(PERFMON_CMD_READ, 0);
+	val >>= alpha_pmu->pmc_count_shift[idx];
+	val &= alpha_pmu->pmc_count_mask[idx];
+	return val;
+}
+
+/* Set a new period to sample over */
+static int alpha_perf_event_set_period(struct perf_event *event,
+				struct hw_perf_event *hwc, int idx)
+{
+	long left = local64_read(&hwc->period_left);
+	long period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	/*
+	 * Hardware restrictions require that the counters must not be
+	 * written with values that are too close to the maximum period.
+	 */
+	if (unlikely(left < alpha_pmu->pmc_left[idx]))
+		left = alpha_pmu->pmc_left[idx];
+
+	if (left > (long)alpha_pmu->pmc_max_period[idx])
+		left = alpha_pmu->pmc_max_period[idx];
+
+	local64_set(&hwc->prev_count, (unsigned long)(-left));
+
+	alpha_write_pmc(idx, (unsigned long)(-left));
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+
+/*
+ * Calculates the count (the 'delta') since the last time the PMC was read.
+ *
+ * As the PMCs' full period can easily be exceeded within the perf system
+ * sampling period we cannot use any high order bits as a guard bit in the
+ * PMCs to detect overflow as is done by other architectures.  The code here
+ * calculates the delta on the basis that there is no overflow when ovf is
+ * zero.  The value passed via ovf by the interrupt handler corrects for
+ * overflow.
+ *
+ * This can be racey on rare occasions -- a call to this routine can occur
+ * with an overflowed counter just before the PMI service routine is called.
+ * The check for delta negative hopefully always rectifies this situation.
+ */
+static unsigned long alpha_perf_event_update(struct perf_event *event,
+					struct hw_perf_event *hwc, int idx, long ovf)
+{
+	long prev_raw_count, new_raw_count;
+	long delta;
+
+again:
+	prev_raw_count = local64_read(&hwc->prev_count);
+	new_raw_count = alpha_read_pmc(idx);
+
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count - (prev_raw_count & alpha_pmu->pmc_count_mask[idx])) + ovf;
+
+	/* It is possible on very rare occasions that the PMC has overflowed
+	 * but the interrupt is yet to come.  Detect and fix this situation.
+	 */
+	if (unlikely(delta < 0)) {
+		delta += alpha_pmu->pmc_max_period[idx] + 1;
+	}
+
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+
+/*
+ * Collect all HW events into the array event[].
+ */
+static int collect_events(struct perf_event *group, int max_count,
+			  struct perf_event *event[], unsigned long *evtype,
+			  int *current_idx)
+{
+	struct perf_event *pe;
+	int n = 0;
+
+	if (!is_software_event(group)) {
+		if (n >= max_count)
+			return -1;
+		event[n] = group;
+		evtype[n] = group->hw.event_base;
+		current_idx[n++] = PMC_NO_INDEX;
+	}
+	for_each_sibling_event(pe, group) {
+		if (!is_software_event(pe) && pe->state != PERF_EVENT_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			event[n] = pe;
+			evtype[n] = pe->hw.event_base;
+			current_idx[n++] = PMC_NO_INDEX;
+		}
+	}
+	return n;
+}
+
+
+
+/*
+ * Check that a group of events can be simultaneously scheduled on to the PMU.
+ */
+static int alpha_check_constraints(struct perf_event **events,
+				   unsigned long *evtypes, int n_ev)
+{
+
+	/* No HW events is possible from hw_perf_group_sched_in(). */
+	if (n_ev == 0)
+		return 0;
+
+	if (n_ev > alpha_pmu->num_pmcs)
+		return -1;
+
+	return alpha_pmu->check_constraints(events, evtypes, n_ev);
+}
+
+
+/*
+ * If new events have been scheduled then update cpuc with the new
+ * configuration.  This may involve shifting cycle counts from one PMC to
+ * another.
+ */
+static void maybe_change_configuration(struct cpu_hw_events *cpuc)
+{
+	int j;
+
+	if (cpuc->n_added == 0)
+		return;
+
+	/* Find counters that are moving to another PMC and update */
+	for (j = 0; j < cpuc->n_events; j++) {
+		struct perf_event *pe = cpuc->event[j];
+
+		if (cpuc->current_idx[j] != PMC_NO_INDEX &&
+			cpuc->current_idx[j] != pe->hw.idx) {
+			alpha_perf_event_update(pe, &pe->hw, cpuc->current_idx[j], 0);
+			cpuc->current_idx[j] = PMC_NO_INDEX;
+		}
+	}
+
+	/* Assign to counters all unassigned events. */
+	cpuc->idx_mask = 0;
+	for (j = 0; j < cpuc->n_events; j++) {
+		struct perf_event *pe = cpuc->event[j];
+		struct hw_perf_event *hwc = &pe->hw;
+		int idx = hwc->idx;
+
+		if (cpuc->current_idx[j] == PMC_NO_INDEX) {
+			alpha_perf_event_set_period(pe, hwc, idx);
+			cpuc->current_idx[j] = idx;
+		}
+
+		if (!(hwc->state & PERF_HES_STOPPED))
+			cpuc->idx_mask |= (1<<cpuc->current_idx[j]);
+	}
+	cpuc->config = cpuc->event[0]->hw.config_base;
+}
+
+
+
+/* Schedule perf HW event on to PMU.
+ *  - this function is called from outside this module via the pmu struct
+ *    returned from perf event initialisation.
+ */
+static int alpha_pmu_add(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int n0;
+	int ret;
+	unsigned long irq_flags;
+
+	/*
+	 * The Sparc code has the IRQ disable first followed by the perf
+	 * disable, however this can lead to an overflowed counter with the
+	 * PMI disabled on rare occasions.  The alpha_perf_event_update()
+	 * routine should detect this situation by noting a negative delta,
+	 * nevertheless we disable the PMCs first to enable a potential
+	 * final PMI to occur before we disable interrupts.
+	 */
+	perf_pmu_disable(event->pmu);
+	local_irq_save(irq_flags);
+
+	/* Default to error to be returned */
+	ret = -EAGAIN;
+
+	/* Insert event on to PMU and if successful modify ret to valid return */
+	n0 = cpuc->n_events;
+	if (n0 < alpha_pmu->num_pmcs) {
+		cpuc->event[n0] = event;
+		cpuc->evtype[n0] = event->hw.event_base;
+		cpuc->current_idx[n0] = PMC_NO_INDEX;
+
+		if (!alpha_check_constraints(cpuc->event, cpuc->evtype, n0+1)) {
+			cpuc->n_events++;
+			cpuc->n_added++;
+			ret = 0;
+		}
+	}
+
+	hwc->state = PERF_HES_UPTODATE;
+	if (!(flags & PERF_EF_START))
+		hwc->state |= PERF_HES_STOPPED;
+
+	local_irq_restore(irq_flags);
+	perf_pmu_enable(event->pmu);
+
+	return ret;
+}
+
+
+
+/* Disable performance monitoring unit
+ *  - this function is called from outside this module via the pmu struct
+ *    returned from perf event initialisation.
+ */
+static void alpha_pmu_del(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	unsigned long irq_flags;
+	int j;
+
+	perf_pmu_disable(event->pmu);
+	local_irq_save(irq_flags);
+
+	for (j = 0; j < cpuc->n_events; j++) {
+		if (event == cpuc->event[j]) {
+			int idx = cpuc->current_idx[j];
+
+			/* Shift remaining entries down into the existing
+			 * slot.
+			 */
+			while (++j < cpuc->n_events) {
+				cpuc->event[j - 1] = cpuc->event[j];
+				cpuc->evtype[j - 1] = cpuc->evtype[j];
+				cpuc->current_idx[j - 1] =
+					cpuc->current_idx[j];
+			}
+
+			/* Absorb the final count and turn off the event. */
+			alpha_perf_event_update(event, hwc, idx, 0);
+			perf_event_update_userpage(event);
+
+			cpuc->idx_mask &= ~(1UL<<idx);
+			cpuc->n_events--;
+			break;
+		}
+	}
+
+	local_irq_restore(irq_flags);
+	perf_pmu_enable(event->pmu);
+}
+
+
+static void alpha_pmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	alpha_perf_event_update(event, hwc, hwc->idx, 0);
+}
+
+
+static void alpha_pmu_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (!(hwc->state & PERF_HES_STOPPED)) {
+		cpuc->idx_mask &= ~(1UL<<hwc->idx);
+		hwc->state |= PERF_HES_STOPPED;
+	}
+
+	if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
+		alpha_perf_event_update(event, hwc, hwc->idx, 0);
+		hwc->state |= PERF_HES_UPTODATE;
+	}
+
+	if (cpuc->enabled)
+		wrperfmon(PERFMON_CMD_DISABLE, (1UL<<hwc->idx));
+}
+
+
+static void alpha_pmu_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
+		return;
+
+	if (flags & PERF_EF_RELOAD) {
+		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+		alpha_perf_event_set_period(event, hwc, hwc->idx);
+	}
+
+	hwc->state = 0;
+
+	cpuc->idx_mask |= 1UL<<hwc->idx;
+	if (cpuc->enabled)
+		wrperfmon(PERFMON_CMD_ENABLE, (1UL<<hwc->idx));
+}
+
+
+/*
+ * Check that CPU performance counters are supported.
+ * - currently support EV67 and later CPUs.
+ * - actually some later revisions of the EV6 have the same PMC model as the
+ *     EV67 but we don't do sufficiently deep CPU detection to detect them.
+ *     Bad luck to the very few people who might have one, I guess.
+ */
+static int supported_cpu(void)
+{
+	struct percpu_struct *cpu;
+	unsigned long cputype;
+
+	/* Get cpu type from HW */
+	cpu = (struct percpu_struct *)((char *)hwrpb + hwrpb->processor_offset);
+	cputype = cpu->type & 0xffffffff;
+	/* Include all of EV67, EV68, EV7, EV79 and EV69 as supported. */
+	return (cputype >= EV67_CPU) && (cputype <= EV69_CPU);
+}
+
+
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	/* Nothing to be done! */
+	return;
+}
+
+
+
+static int __hw_perf_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_event *evts[MAX_HWEVENTS];
+	unsigned long evtypes[MAX_HWEVENTS];
+	int idx_rubbish_bin[MAX_HWEVENTS];
+	int ev;
+	int n;
+
+	/* We only support a limited range of HARDWARE event types with one
+	 * only programmable via a RAW event type.
+	 */
+	if (attr->type == PERF_TYPE_HARDWARE) {
+		if (attr->config >= alpha_pmu->max_events)
+			return -EINVAL;
+		ev = alpha_pmu->event_map[attr->config];
+	} else if (attr->type == PERF_TYPE_HW_CACHE) {
+		return -EOPNOTSUPP;
+	} else if (attr->type == PERF_TYPE_RAW) {
+		if (!alpha_pmu->raw_event_valid(attr->config))
+			return -EINVAL;
+		ev = attr->config;
+	} else {
+		return -EOPNOTSUPP;
+	}
+
+	if (ev < 0) {
+		return ev;
+	}
+
+	/*
+	 * We place the event type in event_base here and leave calculation
+	 * of the codes to programme the PMU for alpha_pmu_enable() because
+	 * it is only then we will know what HW events are actually
+	 * scheduled on to the PMU.  At that point the code to programme the
+	 * PMU is put into config_base and the PMC to use is placed into
+	 * idx.  We initialise idx (below) to PMC_NO_INDEX to indicate that
+	 * it is yet to be determined.
+	 */
+	hwc->event_base = ev;
+
+	/* Collect events in a group together suitable for calling
+	 * alpha_check_constraints() to verify that the group as a whole can
+	 * be scheduled on to the PMU.
+	 */
+	n = 0;
+	if (event->group_leader != event) {
+		n = collect_events(event->group_leader,
+				alpha_pmu->num_pmcs - 1,
+				evts, evtypes, idx_rubbish_bin);
+		if (n < 0)
+			return -EINVAL;
+	}
+	evtypes[n] = hwc->event_base;
+	evts[n] = event;
+
+	if (alpha_check_constraints(evts, evtypes, n + 1))
+		return -EINVAL;
+
+	/* Indicate that PMU config and idx are yet to be determined. */
+	hwc->config_base = 0;
+	hwc->idx = PMC_NO_INDEX;
+
+	event->destroy = hw_perf_event_destroy;
+
+	/*
+	 * Most architectures reserve the PMU for their use at this point.
+	 * As there is no existing mechanism to arbitrate usage and there
+	 * appears to be no other user of the Alpha PMU we just assume
+	 * that we can just use it, hence a NO-OP here.
+	 *
+	 * Maybe an alpha_reserve_pmu() routine should be implemented but is
+	 * anything else ever going to use it?
+	 */
+
+	if (!hwc->sample_period) {
+		hwc->sample_period = alpha_pmu->pmc_max_period[0];
+		hwc->last_period = hwc->sample_period;
+		local64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	return 0;
+}
+
+/*
+ * Main entry point to initialise a HW performance event.
+ */
+static int alpha_pmu_event_init(struct perf_event *event)
+{
+	/* does not support taken branch sampling */
+	if (has_branch_stack(event))
+		return -EOPNOTSUPP;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_RAW:
+	case PERF_TYPE_HARDWARE:
+	case PERF_TYPE_HW_CACHE:
+		break;
+
+	default:
+		return -ENOENT;
+	}
+
+	if (!alpha_pmu)
+		return -ENODEV;
+
+	/* Do the real initialisation work. */
+	return __hw_perf_event_init(event);
+}
+
+/*
+ * Main entry point - enable HW performance counters.
+ */
+static void alpha_pmu_enable(struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	if (cpuc->n_events > 0) {
+		/* Update cpuc with information from any new scheduled events. */
+		maybe_change_configuration(cpuc);
+
+		/* Start counting the desired events. */
+		wrperfmon(PERFMON_CMD_LOGGING_OPTIONS, EV67_PCTR_MODE_AGGREGATE);
+		wrperfmon(PERFMON_CMD_DESIRED_EVENTS, cpuc->config);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+	}
+}
+
+
+/*
+ * Main entry point - disable HW performance counters.
+ */
+
+static void alpha_pmu_disable(struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	cpuc->n_added = 0;
+
+	wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
+}
+
+static struct pmu pmu = {
+	.pmu_enable	= alpha_pmu_enable,
+	.pmu_disable	= alpha_pmu_disable,
+	.event_init	= alpha_pmu_event_init,
+	.add		= alpha_pmu_add,
+	.del		= alpha_pmu_del,
+	.start		= alpha_pmu_start,
+	.stop		= alpha_pmu_stop,
+	.read		= alpha_pmu_read,
+	.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
+};
+
+
+/*
+ * Main entry point - don't know when this is called but it
+ * obviously dumps debug info.
+ */
+void perf_event_print_debug(void)
+{
+	unsigned long flags;
+	unsigned long pcr;
+	int pcr0, pcr1;
+	int cpu;
+
+	if (!supported_cpu())
+		return;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+
+	pcr = wrperfmon(PERFMON_CMD_READ, 0);
+	pcr0 = (pcr >> alpha_pmu->pmc_count_shift[0]) & alpha_pmu->pmc_count_mask[0];
+	pcr1 = (pcr >> alpha_pmu->pmc_count_shift[1]) & alpha_pmu->pmc_count_mask[1];
+
+	pr_info("CPU#%d: PCTR0[%06x] PCTR1[%06x]\n", cpu, pcr0, pcr1);
+
+	local_irq_restore(flags);
+}
+
+
+/*
+ * Performance Monitoring Interrupt Service Routine called when a PMC
+ * overflows.  The PMC that overflowed is passed in la_ptr.
+ */
+static void alpha_perf_event_irq_handler(unsigned long la_ptr,
+					struct pt_regs *regs)
+{
+	struct cpu_hw_events *cpuc;
+	struct perf_sample_data data;
+	struct perf_event *event;
+	struct hw_perf_event *hwc;
+	int idx, j;
+
+	__this_cpu_inc(irq_pmi_count);
+	cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	/* Completely counting through the PMC's period to trigger a new PMC
+	 * overflow interrupt while in this interrupt routine is utterly
+	 * disastrous!  The EV6 and EV67 counters are sufficiently large to
+	 * prevent this but to be really sure disable the PMCs.
+	 */
+	wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
+
+	/* la_ptr is the counter that overflowed. */
+	if (unlikely(la_ptr >= alpha_pmu->num_pmcs)) {
+		/* This should never occur! */
+		irq_err_count++;
+		pr_warn("PMI: silly index %ld\n", la_ptr);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	idx = la_ptr;
+
+	for (j = 0; j < cpuc->n_events; j++) {
+		if (cpuc->current_idx[j] == idx)
+			break;
+	}
+
+	if (unlikely(j == cpuc->n_events)) {
+		/* This can occur if the event is disabled right on a PMC overflow. */
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	event = cpuc->event[j];
+
+	if (unlikely(!event)) {
+		/* This should never occur! */
+		irq_err_count++;
+		pr_warn("PMI: No event at index %d!\n", idx);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	hwc = &event->hw;
+	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
+	perf_sample_data_init(&data, 0, hwc->last_period);
+
+	if (alpha_perf_event_set_period(event, hwc, idx)) {
+		if (perf_event_overflow(event, &data, regs)) {
+			/* Interrupts coming too quickly; "throttle" the
+			 * counter, i.e., disable it for a little while.
+			 */
+			alpha_pmu_stop(event, 0);
+		}
+	}
+	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+
+	return;
+}
+
+
+
+/*
+ * Init call to initialise performance events at kernel startup.
+ */
+int __init init_hw_perf_events(void)
+{
+	pr_info("Performance events: ");
+
+	if (!supported_cpu()) {
+		pr_cont("No support for your CPU.\n");
+		return 0;
+	}
+
+	pr_cont("Supported CPU type!\n");
+
+	/* Override performance counter IRQ vector */
+
+	perf_irq = alpha_perf_event_irq_handler;
+
+	/* And set up PMU specification */
+	alpha_pmu = &ev67_pmu;
+
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
+
+	return 0;
+}
+early_initcall(init_hw_perf_events);
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
new file mode 100644
index 0000000000..582d965483
--- /dev/null
+++ b/arch/alpha/kernel/process.c
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/process.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling.
+ */
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/time.h>
+#include <linux/major.h>
+#include <linux/stat.h>
+#include <linux/vt.h>
+#include <linux/mman.h>
+#include <linux/elfcore.h>
+#include <linux/reboot.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/slab.h>
+#include <linux/rcupdate.h>
+
+#include <asm/reg.h>
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/hwrpb.h>
+#include <asm/fpu.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/*
+ * Power off function, if any
+ */
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
+#ifdef CONFIG_ALPHA_WTINT
+/*
+ * Sleep the CPU.
+ * EV6, LCA45 and QEMU know how to power down, skipping N timer interrupts.
+ */
+void arch_cpu_idle(void)
+{
+	wtint(0);
+}
+
+void __noreturn arch_cpu_idle_dead(void)
+{
+	wtint(INT_MAX);
+	BUG();
+}
+#endif /* ALPHA_WTINT */
+
+struct halt_info {
+	int mode;
+	char *restart_cmd;
+};
+
+static void
+common_shutdown_1(void *generic_ptr)
+{
+	struct halt_info *how = generic_ptr;
+	struct percpu_struct *cpup;
+	unsigned long *pflags, flags;
+	int cpuid = smp_processor_id();
+
+	/* No point in taking interrupts anymore. */
+	local_irq_disable();
+
+	cpup = (struct percpu_struct *)
+			((unsigned long)hwrpb + hwrpb->processor_offset
+			 + hwrpb->processor_size * cpuid);
+	pflags = &cpup->flags;
+	flags = *pflags;
+
+	/* Clear reason to "default"; clear "bootstrap in progress". */
+	flags &= ~0x00ff0001UL;
+
+#ifdef CONFIG_SMP
+	/* Secondaries halt here. */
+	if (cpuid != boot_cpuid) {
+		flags |= 0x00040000UL; /* "remain halted" */
+		*pflags = flags;
+		set_cpu_present(cpuid, false);
+		set_cpu_possible(cpuid, false);
+		halt();
+	}
+#endif
+
+	if (how->mode == LINUX_REBOOT_CMD_RESTART) {
+		if (!how->restart_cmd) {
+			flags |= 0x00020000UL; /* "cold bootstrap" */
+		} else {
+			/* For SRM, we could probably set environment
+			   variables to get this to work.  We'd have to
+			   delay this until after srm_paging_stop unless
+			   we ever got srm_fixup working.
+
+			   At the moment, SRM will use the last boot device,
+			   but the file and flags will be the defaults, when
+			   doing a "warm" bootstrap.  */
+			flags |= 0x00030000UL; /* "warm bootstrap" */
+		}
+	} else {
+		flags |= 0x00040000UL; /* "remain halted" */
+	}
+	*pflags = flags;
+
+#ifdef CONFIG_SMP
+	/* Wait for the secondaries to halt. */
+	set_cpu_present(boot_cpuid, false);
+	set_cpu_possible(boot_cpuid, false);
+	while (!cpumask_empty(cpu_present_mask))
+		barrier();
+#endif
+
+	/* If booted from SRM, reset some of the original environment. */
+	if (alpha_using_srm) {
+#ifdef CONFIG_DUMMY_CONSOLE
+		/* If we've gotten here after SysRq-b, leave interrupt
+		   context before taking over the console. */
+		if (in_hardirq())
+			irq_exit();
+		/* This has the effect of resetting the VGA video origin.  */
+		console_lock();
+		do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
+		console_unlock();
+#endif
+		pci_restore_srm_config();
+		set_hae(srm_hae);
+	}
+
+	if (alpha_mv.kill_arch)
+		alpha_mv.kill_arch(how->mode);
+
+	if (! alpha_using_srm && how->mode != LINUX_REBOOT_CMD_RESTART) {
+		/* Unfortunately, since MILO doesn't currently understand
+		   the hwrpb bits above, we can't reliably halt the 
+		   processor and keep it halted.  So just loop.  */
+		return;
+	}
+
+	if (alpha_using_srm)
+		srm_paging_stop();
+
+	halt();
+}
+
+static void
+common_shutdown(int mode, char *restart_cmd)
+{
+	struct halt_info args;
+	args.mode = mode;
+	args.restart_cmd = restart_cmd;
+	on_each_cpu(common_shutdown_1, &args, 0);
+}
+
+void
+machine_restart(char *restart_cmd)
+{
+	common_shutdown(LINUX_REBOOT_CMD_RESTART, restart_cmd);
+}
+
+
+void
+machine_halt(void)
+{
+	common_shutdown(LINUX_REBOOT_CMD_HALT, NULL);
+}
+
+
+void
+machine_power_off(void)
+{
+	common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
+}
+
+
+/* Used by sysrq-p, among others.  I don't believe r9-r15 are ever
+   saved in the context it's used.  */
+
+void
+show_regs(struct pt_regs *regs)
+{
+	show_regs_print_info(KERN_DEFAULT);
+	dik_show_regs(regs, NULL);
+}
+
+/*
+ * Re-start a thread when doing execve()
+ */
+void
+start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
+{
+	regs->pc = pc;
+	regs->ps = 8;
+	wrusp(sp);
+}
+EXPORT_SYMBOL(start_thread);
+
+void
+flush_thread(void)
+{
+	/* Arrange for each exec'ed process to start off with a clean slate
+	   with respect to the FPU.  This is all exceptions disabled.  */
+	current_thread_info()->ieee_state = 0;
+	wrfpcr(FPCR_DYN_NORMAL | ieee_swcr_to_fpcr(0));
+
+	/* Clean slate for TLS.  */
+	current_thread_info()->pcb.unique = 0;
+}
+
+/*
+ * Copy architecture-specific thread state
+ */
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
+{
+	unsigned long clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
+	extern void ret_from_fork(void);
+	extern void ret_from_kernel_thread(void);
+
+	struct thread_info *childti = task_thread_info(p);
+	struct pt_regs *childregs = task_pt_regs(p);
+	struct pt_regs *regs = current_pt_regs();
+	struct switch_stack *childstack, *stack;
+
+	childstack = ((struct switch_stack *) childregs) - 1;
+	childti->pcb.ksp = (unsigned long) childstack;
+	childti->pcb.flags = 1;	/* set FEN, clear everything else */
+	childti->status |= TS_SAVED_FP | TS_RESTORE_FP;
+
+	if (unlikely(args->fn)) {
+		/* kernel thread */
+		memset(childstack, 0,
+			sizeof(struct switch_stack) + sizeof(struct pt_regs));
+		childstack->r26 = (unsigned long) ret_from_kernel_thread;
+		childstack->r9 = (unsigned long) args->fn;
+		childstack->r10 = (unsigned long) args->fn_arg;
+		childregs->hae = alpha_mv.hae_cache;
+		memset(childti->fp, '\0', sizeof(childti->fp));
+		childti->pcb.usp = 0;
+		return 0;
+	}
+	/* Note: if CLONE_SETTLS is not set, then we must inherit the
+	   value from the parent, which will have been set by the block
+	   copy in dup_task_struct.  This is non-intuitive, but is
+	   required for proper operation in the case of a threaded
+	   application calling fork.  */
+	if (clone_flags & CLONE_SETTLS)
+		childti->pcb.unique = tls;
+	else
+		regs->r20 = 0;	/* OSF/1 has some strange fork() semantics.  */
+	childti->pcb.usp = usp ?: rdusp();
+	*childregs = *regs;
+	childregs->r0 = 0;
+	childregs->r19 = 0;
+	childregs->r20 = 1;	/* OSF/1 has some strange fork() semantics.  */
+	stack = ((struct switch_stack *) regs) - 1;
+	*childstack = *stack;
+	childstack->r26 = (unsigned long) ret_from_fork;
+	return 0;
+}
+
+/*
+ * Fill in the user structure for a ELF core dump.
+ */
+void
+dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, struct thread_info *ti)
+{
+	/* switch stack follows right below pt_regs: */
+	struct switch_stack * sw = ((struct switch_stack *) pt) - 1;
+
+	dest[ 0] = pt->r0;
+	dest[ 1] = pt->r1;
+	dest[ 2] = pt->r2;
+	dest[ 3] = pt->r3;
+	dest[ 4] = pt->r4;
+	dest[ 5] = pt->r5;
+	dest[ 6] = pt->r6;
+	dest[ 7] = pt->r7;
+	dest[ 8] = pt->r8;
+	dest[ 9] = sw->r9;
+	dest[10] = sw->r10;
+	dest[11] = sw->r11;
+	dest[12] = sw->r12;
+	dest[13] = sw->r13;
+	dest[14] = sw->r14;
+	dest[15] = sw->r15;
+	dest[16] = pt->r16;
+	dest[17] = pt->r17;
+	dest[18] = pt->r18;
+	dest[19] = pt->r19;
+	dest[20] = pt->r20;
+	dest[21] = pt->r21;
+	dest[22] = pt->r22;
+	dest[23] = pt->r23;
+	dest[24] = pt->r24;
+	dest[25] = pt->r25;
+	dest[26] = pt->r26;
+	dest[27] = pt->r27;
+	dest[28] = pt->r28;
+	dest[29] = pt->gp;
+	dest[30] = ti == current_thread_info() ? rdusp() : ti->pcb.usp;
+	dest[31] = pt->pc;
+
+	/* Once upon a time this was the PS value.  Which is stupid
+	   since that is always 8 for usermode.  Usurped for the more
+	   useful value of the thread's UNIQUE field.  */
+	dest[32] = ti->pcb.unique;
+}
+EXPORT_SYMBOL(dump_elf_thread);
+
+int
+dump_elf_task(elf_greg_t *dest, struct task_struct *task)
+{
+	dump_elf_thread(dest, task_pt_regs(task), task_thread_info(task));
+	return 1;
+}
+EXPORT_SYMBOL(dump_elf_task);
+
+int elf_core_copy_task_fpregs(struct task_struct *t, elf_fpregset_t *fpu)
+{
+	memcpy(fpu, task_thread_info(t)->fp, 32 * 8);
+	return 1;
+}
+
+/*
+ * Return saved PC of a blocked thread.  This assumes the frame
+ * pointer is the 6th saved long on the kernel stack and that the
+ * saved return address is the first long in the frame.  This all
+ * holds provided the thread blocked through a call to schedule() ($15
+ * is the frame pointer in schedule() and $15 is saved at offset 48 by
+ * entry.S:do_switch_stack).
+ *
+ * Under heavy swap load I've seen this lose in an ugly way.  So do
+ * some extra sanity checking on the ranges we expect these pointers
+ * to be in so that we can fail gracefully.  This is just for ps after
+ * all.  -- r~
+ */
+
+static unsigned long
+thread_saved_pc(struct task_struct *t)
+{
+	unsigned long base = (unsigned long)task_stack_page(t);
+	unsigned long fp, sp = task_thread_info(t)->pcb.ksp;
+
+	if (sp > base && sp+6*8 < base + 16*1024) {
+		fp = ((unsigned long*)sp)[6];
+		if (fp > sp && fp < base + 16*1024)
+			return *(unsigned long *)fp;
+	}
+
+	return 0;
+}
+
+unsigned long
+__get_wchan(struct task_struct *p)
+{
+	unsigned long schedule_frame;
+	unsigned long pc;
+
+	/*
+	 * This one depends on the frame size of schedule().  Do a
+	 * "disass schedule" in gdb to find the frame size.  Also, the
+	 * code assumes that sleep_on() follows immediately after
+	 * interruptible_sleep_on() and that add_timer() follows
+	 * immediately after interruptible_sleep().  Ugly, isn't it?
+	 * Maybe adding a wchan field to task_struct would be better,
+	 * after all...
+	 */
+
+	pc = thread_saved_pc(p);
+	if (in_sched_functions(pc)) {
+		schedule_frame = ((unsigned long *)task_thread_info(p)->pcb.ksp)[6];
+		return ((unsigned long *)schedule_frame)[12];
+	}
+	return pc;
+}
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
new file mode 100644
index 0000000000..5816a31c1b
--- /dev/null
+++ b/arch/alpha/kernel/proto.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+/* Prototypes of functions used across modules here in this directory.  */
+
+#define vucp	volatile unsigned char  *
+#define vusp	volatile unsigned short *
+#define vip	volatile int *
+#define vuip	volatile unsigned int   *
+#define vulp	volatile unsigned long  *
+
+struct pt_regs;
+struct task_struct;
+struct pci_dev;
+struct pci_controller;
+
+/* core_apecs.c */
+extern struct pci_ops apecs_pci_ops;
+extern void apecs_init_arch(void);
+extern void apecs_pci_clr_err(void);
+extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
+extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+
+/* core_cia.c */
+extern struct pci_ops cia_pci_ops;
+extern void cia_init_pci(void);
+extern void cia_init_arch(void);
+extern void pyxis_init_arch(void);
+extern void cia_kill_arch(int);
+extern void cia_machine_check(unsigned long vector, unsigned long la_ptr);
+extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+
+/* core_irongate.c */
+extern struct pci_ops irongate_pci_ops;
+extern int irongate_pci_clr_err(void);
+extern void irongate_init_arch(void);
+#define irongate_pci_tbi ((void *)0)
+
+/* core_lca.c */
+extern struct pci_ops lca_pci_ops;
+extern void lca_init_arch(void);
+extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
+extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+
+/* core_marvel.c */
+extern struct pci_ops marvel_pci_ops;
+extern void marvel_init_arch(void);
+extern void marvel_kill_arch(int);
+extern void marvel_machine_check(unsigned long, unsigned long);
+extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+extern struct _alpha_agp_info *marvel_agp_info(void);
+struct io7 *marvel_find_io7(int pe);
+struct io7 *marvel_next_io7(struct io7 *prev);
+void io7_clear_errors(struct io7 *io7);
+
+/* core_mcpcia.c */
+extern struct pci_ops mcpcia_pci_ops;
+extern void mcpcia_init_arch(void);
+extern void mcpcia_init_hoses(void);
+extern void mcpcia_machine_check(unsigned long vector, unsigned long la_ptr);
+extern void mcpcia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+
+/* core_polaris.c */
+extern struct pci_ops polaris_pci_ops;
+extern int polaris_read_config_dword(struct pci_dev *, int, u32 *);
+extern int polaris_write_config_dword(struct pci_dev *, int, u32);
+extern void polaris_init_arch(void);
+extern void polaris_machine_check(unsigned long vector, unsigned long la_ptr);
+#define polaris_pci_tbi ((void *)0)
+
+/* core_t2.c */
+extern struct pci_ops t2_pci_ops;
+extern void t2_init_arch(void);
+extern void t2_kill_arch(int);
+extern void t2_machine_check(unsigned long vector, unsigned long la_ptr);
+extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+
+/* core_titan.c */
+extern struct pci_ops titan_pci_ops;
+extern void titan_init_arch(void);
+extern void titan_kill_arch(int);
+extern void titan_machine_check(unsigned long, unsigned long);
+extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+extern struct _alpha_agp_info *titan_agp_info(void);
+
+/* core_tsunami.c */
+extern struct pci_ops tsunami_pci_ops;
+extern void tsunami_init_arch(void);
+extern void tsunami_kill_arch(int);
+extern void tsunami_machine_check(unsigned long vector, unsigned long la_ptr);
+extern void tsunami_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+
+/* core_wildfire.c */
+extern struct pci_ops wildfire_pci_ops;
+extern void wildfire_init_arch(void);
+extern void wildfire_kill_arch(int);
+extern void wildfire_machine_check(unsigned long vector, unsigned long la_ptr);
+extern void wildfire_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+
+/* console.c */
+#ifdef CONFIG_VGA_HOSE
+extern void find_console_vga_hose(void);
+extern void locate_and_init_vga(void *(*)(void *, void *));
+#else
+static inline void find_console_vga_hose(void) { }
+static inline void locate_and_init_vga(void *(*sel_func)(void *, void *)) { }
+#endif
+
+/* setup.c */
+extern unsigned long srm_hae;
+extern int boot_cpuid;
+#ifdef CONFIG_VERBOSE_MCHECK
+extern unsigned long alpha_verbose_mcheck;
+#endif
+
+/* srmcons.c */
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
+extern void register_srm_console(void);
+extern void unregister_srm_console(void);
+#else
+#define register_srm_console()
+#define unregister_srm_console()
+#endif
+
+/* smp.c */
+extern void setup_smp(void);
+extern void handle_ipi(struct pt_regs *);
+
+/* bios32.c */
+/* extern void reset_for_srm(void); */
+
+/* time.c */
+extern irqreturn_t rtc_timer_interrupt(int irq, void *dev);
+extern void init_clockevent(void);
+extern void common_init_rtc(void);
+extern unsigned long est_cycle_freq;
+
+/* smc37c93x.c */
+extern void SMC93x_Init(void);
+
+/* smc37c669.c */
+extern void SMC669_Init(int);
+
+/* es1888.c */
+extern void es1888_init(void);
+
+/* ../lib/fpreg.c */
+extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
+extern unsigned long alpha_read_fp_reg (unsigned long reg);
+
+/* head.S */
+extern void wrmces(unsigned long mces);
+extern void cserve_ena(unsigned long);
+extern void cserve_dis(unsigned long);
+extern void __smp_callin(unsigned long);
+
+/* entry.S */
+extern void entArith(void);
+extern void entIF(void);
+extern void entInt(void);
+extern void entMM(void);
+extern void entSys(void);
+extern void entUna(void);
+extern void entDbg(void);
+
+/* ptrace.c */
+extern int ptrace_set_bpt (struct task_struct *child);
+extern int ptrace_cancel_bpt (struct task_struct *child);
+
+/* traps.c */
+extern void dik_show_regs(struct pt_regs *regs, unsigned long *r9_15);
+extern void die_if_kernel(char *, struct pt_regs *, long, unsigned long *);
+
+/* sys_titan.c */
+extern void titan_dispatch_irqs(u64);
+
+/* ../mm/init.c */
+extern void switch_to_system_map(void);
+extern void srm_paging_stop(void);
+
+static inline int
+__alpha_remap_area_pages(unsigned long address, unsigned long phys_addr,
+			 unsigned long size, unsigned long flags)
+{
+	pgprot_t prot;
+
+	prot = __pgprot(_PAGE_VALID | _PAGE_ASM | _PAGE_KRE
+			| _PAGE_KWE | flags);
+	return ioremap_page_range(address, address + size, phys_addr, prot);
+}
+
+/* irq.c */
+
+#ifdef CONFIG_SMP
+#define mcheck_expected(cpu)	(cpu_data[cpu].mcheck_expected)
+#define mcheck_taken(cpu)	(cpu_data[cpu].mcheck_taken)
+#define mcheck_extra(cpu)	(cpu_data[cpu].mcheck_extra)
+#else
+extern struct mcheck_info
+{
+	unsigned char expected __attribute__((aligned(8)));
+	unsigned char taken;
+	unsigned char extra;
+} __mcheck_info;
+
+#define mcheck_expected(cpu)	(*((void)(cpu), &__mcheck_info.expected))
+#define mcheck_taken(cpu)	(*((void)(cpu), &__mcheck_info.taken))
+#define mcheck_extra(cpu)	(*((void)(cpu), &__mcheck_info.extra))
+#endif
+
+extern void process_mcheck_info(unsigned long vector, unsigned long la_ptr,
+				const char *machine, int expected);
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
new file mode 100644
index 0000000000..fde4c68e7a
--- /dev/null
+++ b/arch/alpha/kernel/ptrace.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0
+/* ptrace.c */
+/* By Ross Biro 1/23/92 */
+/* edited by Linus Torvalds */
+/* mangled further by Bob Manson (manson@santafe.edu) */
+/* more mutilation by David Mosberger (davidm@azstarnet.com) */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/audit.h>
+
+#include <linux/uaccess.h>
+#include <asm/fpu.h>
+
+#include "proto.h"
+
+#define DEBUG	DBG_MEM
+#undef DEBUG
+
+#ifdef DEBUG
+enum {
+	DBG_MEM		= (1<<0),
+	DBG_BPT		= (1<<1),
+	DBG_MEM_ALL	= (1<<2)
+};
+#define DBG(fac,args)	{if ((fac) & DEBUG) printk args;}
+#else
+#define DBG(fac,args)
+#endif
+
+#define BREAKINST	0x00000080	/* call_pal bpt */
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/*
+ * Processes always block with the following stack-layout:
+ *
+ *  +================================+ <---- task + 2*PAGE_SIZE
+ *  | PALcode saved frame (ps, pc,   | ^
+ *  | gp, a0, a1, a2)		     | |
+ *  +================================+ | struct pt_regs
+ *  |	        		     | |
+ *  | frame generated by SAVE_ALL    | |
+ *  |	        		     | v
+ *  +================================+
+ *  |	        		     | ^
+ *  | frame saved by do_switch_stack | | struct switch_stack
+ *  |	        		     | v
+ *  +================================+
+ */
+
+/* 
+ * The following table maps a register index into the stack offset at
+ * which the register is saved.  Register indices are 0-31 for integer
+ * regs, 32-63 for fp regs, and 64 for the pc.  Notice that sp and
+ * zero have no stack-slot and need to be treated specially (see
+ * get_reg/put_reg below).
+ */
+enum {
+	REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64
+};
+
+#define PT_REG(reg) \
+  (PAGE_SIZE*2 - sizeof(struct pt_regs) + offsetof(struct pt_regs, reg))
+
+#define SW_REG(reg) \
+ (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
+  + offsetof(struct switch_stack, reg))
+
+#define FP_REG(reg) (offsetof(struct thread_info, reg))
+
+static int regoff[] = {
+	PT_REG(	   r0), PT_REG(	   r1), PT_REG(	   r2), PT_REG(	  r3),
+	PT_REG(	   r4), PT_REG(	   r5), PT_REG(	   r6), PT_REG(	  r7),
+	PT_REG(	   r8), SW_REG(	   r9), SW_REG(	  r10), SW_REG(	 r11),
+	SW_REG(	  r12), SW_REG(	  r13), SW_REG(	  r14), SW_REG(	 r15),
+	PT_REG(	  r16), PT_REG(	  r17), PT_REG(	  r18), PT_REG(	 r19),
+	PT_REG(	  r20), PT_REG(	  r21), PT_REG(	  r22), PT_REG(	 r23),
+	PT_REG(	  r24), PT_REG(	  r25), PT_REG(	  r26), PT_REG(	 r27),
+	PT_REG(	  r28), PT_REG(	   gp),		   -1,		   -1,
+	FP_REG(fp[ 0]), FP_REG(fp[ 1]), FP_REG(fp[ 2]), FP_REG(fp[ 3]),
+	FP_REG(fp[ 4]), FP_REG(fp[ 5]), FP_REG(fp[ 6]), FP_REG(fp[ 7]),
+	FP_REG(fp[ 8]), FP_REG(fp[ 9]), FP_REG(fp[10]), FP_REG(fp[11]),
+	FP_REG(fp[12]), FP_REG(fp[13]), FP_REG(fp[14]), FP_REG(fp[15]),
+	FP_REG(fp[16]), FP_REG(fp[17]), FP_REG(fp[18]), FP_REG(fp[19]),
+	FP_REG(fp[20]), FP_REG(fp[21]), FP_REG(fp[22]), FP_REG(fp[23]),
+	FP_REG(fp[24]), FP_REG(fp[25]), FP_REG(fp[26]), FP_REG(fp[27]),
+	FP_REG(fp[28]), FP_REG(fp[29]), FP_REG(fp[30]), FP_REG(fp[31]),
+	PT_REG(	   pc)
+};
+
+static unsigned long zero;
+
+/*
+ * Get address of register REGNO in task TASK.
+ */
+static unsigned long *
+get_reg_addr(struct task_struct * task, unsigned long regno)
+{
+	unsigned long *addr;
+
+	if (regno == 30) {
+		addr = &task_thread_info(task)->pcb.usp;
+	} else if (regno == 65) {
+		addr = &task_thread_info(task)->pcb.unique;
+	} else if (regno == 31 || regno > 65) {
+		zero = 0;
+		addr = &zero;
+	} else {
+		addr = task_stack_page(task) + regoff[regno];
+	}
+	return addr;
+}
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static unsigned long
+get_reg(struct task_struct * task, unsigned long regno)
+{
+	/* Special hack for fpcr -- combine hardware and software bits.  */
+	if (regno == 63) {
+		unsigned long fpcr = *get_reg_addr(task, regno);
+		unsigned long swcr
+		  = task_thread_info(task)->ieee_state & IEEE_SW_MASK;
+		swcr = swcr_update_status(swcr, fpcr);
+		return fpcr | swcr;
+	}
+	return *get_reg_addr(task, regno);
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static int
+put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
+{
+	if (regno == 63) {
+		task_thread_info(task)->ieee_state
+		  = ((task_thread_info(task)->ieee_state & ~IEEE_SW_MASK)
+		     | (data & IEEE_SW_MASK));
+		data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data);
+	}
+	*get_reg_addr(task, regno) = data;
+	return 0;
+}
+
+static inline int
+read_int(struct task_struct *task, unsigned long addr, int * data)
+{
+	int copied = access_process_vm(task, addr, data, sizeof(int),
+			FOLL_FORCE);
+	return (copied == sizeof(int)) ? 0 : -EIO;
+}
+
+static inline int
+write_int(struct task_struct *task, unsigned long addr, int data)
+{
+	int copied = access_process_vm(task, addr, &data, sizeof(int),
+			FOLL_FORCE | FOLL_WRITE);
+	return (copied == sizeof(int)) ? 0 : -EIO;
+}
+
+/*
+ * Set breakpoint.
+ */
+int
+ptrace_set_bpt(struct task_struct * child)
+{
+	int displ, i, res, reg_b, nsaved = 0;
+	unsigned int insn, op_code;
+	unsigned long pc;
+
+	pc  = get_reg(child, REG_PC);
+	res = read_int(child, pc, (int *) &insn);
+	if (res < 0)
+		return res;
+
+	op_code = insn >> 26;
+	if (op_code >= 0x30) {
+		/*
+		 * It's a branch: instead of trying to figure out
+		 * whether the branch will be taken or not, we'll put
+		 * a breakpoint at either location.  This is simpler,
+		 * more reliable, and probably not a whole lot slower
+		 * than the alternative approach of emulating the
+		 * branch (emulation can be tricky for fp branches).
+		 */
+		displ = ((s32)(insn << 11)) >> 9;
+		task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
+		if (displ)		/* guard against unoptimized code */
+			task_thread_info(child)->bpt_addr[nsaved++]
+			  = pc + 4 + displ;
+		DBG(DBG_BPT, ("execing branch\n"));
+	} else if (op_code == 0x1a) {
+		reg_b = (insn >> 16) & 0x1f;
+		task_thread_info(child)->bpt_addr[nsaved++] = get_reg(child, reg_b);
+		DBG(DBG_BPT, ("execing jump\n"));
+	} else {
+		task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
+		DBG(DBG_BPT, ("execing normal insn\n"));
+	}
+
+	/* install breakpoints: */
+	for (i = 0; i < nsaved; ++i) {
+		res = read_int(child, task_thread_info(child)->bpt_addr[i],
+			       (int *) &insn);
+		if (res < 0)
+			return res;
+		task_thread_info(child)->bpt_insn[i] = insn;
+		DBG(DBG_BPT, ("    -> next_pc=%lx\n",
+			      task_thread_info(child)->bpt_addr[i]));
+		res = write_int(child, task_thread_info(child)->bpt_addr[i],
+				BREAKINST);
+		if (res < 0)
+			return res;
+	}
+	task_thread_info(child)->bpt_nsaved = nsaved;
+	return 0;
+}
+
+/*
+ * Ensure no single-step breakpoint is pending.  Returns non-zero
+ * value if child was being single-stepped.
+ */
+int
+ptrace_cancel_bpt(struct task_struct * child)
+{
+	int i, nsaved = task_thread_info(child)->bpt_nsaved;
+
+	task_thread_info(child)->bpt_nsaved = 0;
+
+	if (nsaved > 2) {
+		printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
+		nsaved = 2;
+	}
+
+	for (i = 0; i < nsaved; ++i) {
+		write_int(child, task_thread_info(child)->bpt_addr[i],
+			  task_thread_info(child)->bpt_insn[i]);
+	}
+	return (nsaved != 0);
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	/* Mark single stepping.  */
+	task_thread_info(child)->bpt_nsaved = -1;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	ptrace_cancel_bpt(child);
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{ 
+	user_disable_single_step(child);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	unsigned long tmp;
+	size_t copied;
+	long ret;
+
+	switch (request) {
+	/* When I and D space are separate, these will need to be fixed.  */
+	case PTRACE_PEEKTEXT: /* read word at location addr. */
+	case PTRACE_PEEKDATA:
+		copied = ptrace_access_vm(child, addr, &tmp, sizeof(tmp),
+				FOLL_FORCE);
+		ret = -EIO;
+		if (copied != sizeof(tmp))
+			break;
+		
+		force_successful_syscall_return();
+		ret = tmp;
+		break;
+
+	/* Read register number ADDR. */
+	case PTRACE_PEEKUSR:
+		force_successful_syscall_return();
+		ret = get_reg(child, addr);
+		DBG(DBG_MEM, ("peek $%lu->%#lx\n", addr, ret));
+		break;
+
+	/* When I and D space are separate, this will have to be fixed.  */
+	case PTRACE_POKETEXT: /* write the word at location addr. */
+	case PTRACE_POKEDATA:
+		ret = generic_ptrace_pokedata(child, addr, data);
+		break;
+
+	case PTRACE_POKEUSR: /* write the specified register */
+		DBG(DBG_MEM, ("poke $%lu<-%#lx\n", addr, data));
+		ret = put_reg(child, addr, data);
+		break;
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+	return ret;
+}
+
+asmlinkage unsigned long syscall_trace_enter(void)
+{
+	unsigned long ret = 0;
+	struct pt_regs *regs = current_pt_regs();
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    ptrace_report_syscall_entry(current_pt_regs()))
+		ret = -1UL;
+	audit_syscall_entry(regs->r0, regs->r16, regs->r17, regs->r18, regs->r19);
+	return ret ?: current_pt_regs()->r0;
+}
+
+asmlinkage void
+syscall_trace_leave(void)
+{
+	audit_syscall_exit(current_pt_regs());
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ptrace_report_syscall_exit(current_pt_regs(), 0);
+}
diff --git a/arch/alpha/kernel/rtc.c b/arch/alpha/kernel/rtc.c
new file mode 100644
index 0000000000..cfdf90bc8b
--- /dev/null
+++ b/arch/alpha/kernel/rtc.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/rtc.c
+ *
+ *  Copyright (C) 1991, 1992, 1995, 1999, 2000  Linus Torvalds
+ *
+ * This file contains date handling.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include "proto.h"
+
+
+/*
+ * Support for the RTC device.
+ *
+ * We don't want to use the rtc-cmos driver, because we don't want to support
+ * alarms, as that would be indistinguishable from timer interrupts.
+ *
+ * Further, generic code is really, really tied to a 1900 epoch.  This is
+ * true in __get_rtc_time as well as the users of struct rtc_time e.g.
+ * rtc_tm_to_time.  Thankfully all of the other epochs in use are later
+ * than 1900, and so it's easy to adjust.
+ */
+
+static unsigned long rtc_epoch;
+
+static int __init
+specifiy_epoch(char *str)
+{
+	unsigned long epoch = simple_strtoul(str, NULL, 0);
+	if (epoch < 1900)
+		printk("Ignoring invalid user specified epoch %lu\n", epoch);
+	else
+		rtc_epoch = epoch;
+	return 1;
+}
+__setup("epoch=", specifiy_epoch);
+
+static void __init
+init_rtc_epoch(void)
+{
+	int epoch, year, ctrl;
+
+	if (rtc_epoch != 0) {
+		/* The epoch was specified on the command-line.  */
+		return;
+	}
+
+	/* Detect the epoch in use on this computer.  */
+	ctrl = CMOS_READ(RTC_CONTROL);
+	year = CMOS_READ(RTC_YEAR);
+	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		year = bcd2bin(year);
+
+	/* PC-like is standard; used for year >= 70 */
+	epoch = 1900;
+	if (year < 20) {
+		epoch = 2000;
+	} else if (year >= 20 && year < 48) {
+		/* NT epoch */
+		epoch = 1980;
+	} else if (year >= 48 && year < 70) {
+		/* Digital UNIX epoch */
+		epoch = 1952;
+	}
+	rtc_epoch = epoch;
+
+	printk(KERN_INFO "Using epoch %d for rtc year %d\n", epoch, year);
+}
+
+static int
+alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	int ret = mc146818_get_time(tm, 10);
+
+	if (ret < 0) {
+		dev_err_ratelimited(dev, "unable to read current time\n");
+		return ret;
+	}
+
+	/* Adjust for non-default epochs.  It's easier to depend on the
+	   generic __get_rtc_time and adjust the epoch here than create
+	   a copy of __get_rtc_time with the edits we need.  */
+	if (rtc_epoch != 1900) {
+		int year = tm->tm_year;
+		/* Undo the century adjustment made in __get_rtc_time.  */
+		if (year >= 100)
+			year -= 100;
+		year += rtc_epoch - 1900;
+		/* Redo the century adjustment with the epoch in place.  */
+		if (year <= 69)
+			year += 100;
+		tm->tm_year = year;
+	}
+
+	return 0;
+}
+
+static int
+alpha_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc_time xtm;
+
+	if (rtc_epoch != 1900) {
+		xtm = *tm;
+		xtm.tm_year -= rtc_epoch - 1900;
+		tm = &xtm;
+	}
+
+	return mc146818_set_time(tm);
+}
+
+static int
+alpha_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case RTC_EPOCH_READ:
+		return put_user(rtc_epoch, (unsigned long __user *)arg);
+	case RTC_EPOCH_SET:
+		if (arg < 1900)
+			return -EINVAL;
+		rtc_epoch = arg;
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static const struct rtc_class_ops alpha_rtc_ops = {
+	.read_time = alpha_rtc_read_time,
+	.set_time = alpha_rtc_set_time,
+	.ioctl = alpha_rtc_ioctl,
+};
+
+/*
+ * Similarly, except do the actual CMOS access on the boot cpu only.
+ * This requires marshalling the data across an interprocessor call.
+ */
+
+#if defined(CONFIG_SMP) && \
+    (defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_MARVEL))
+# define HAVE_REMOTE_RTC 1
+
+union remote_data {
+	struct rtc_time *tm;
+	long retval;
+};
+
+static void
+do_remote_read(void *data)
+{
+	union remote_data *x = data;
+	x->retval = alpha_rtc_read_time(NULL, x->tm);
+}
+
+static int
+remote_read_time(struct device *dev, struct rtc_time *tm)
+{
+	union remote_data x;
+	if (smp_processor_id() != boot_cpuid) {
+		x.tm = tm;
+		smp_call_function_single(boot_cpuid, do_remote_read, &x, 1);
+		return x.retval;
+	}
+	return alpha_rtc_read_time(NULL, tm);
+}
+
+static void
+do_remote_set(void *data)
+{
+	union remote_data *x = data;
+	x->retval = alpha_rtc_set_time(NULL, x->tm);
+}
+
+static int
+remote_set_time(struct device *dev, struct rtc_time *tm)
+{
+	union remote_data x;
+	if (smp_processor_id() != boot_cpuid) {
+		x.tm = tm;
+		smp_call_function_single(boot_cpuid, do_remote_set, &x, 1);
+		return x.retval;
+	}
+	return alpha_rtc_set_time(NULL, tm);
+}
+
+static const struct rtc_class_ops remote_rtc_ops = {
+	.read_time = remote_read_time,
+	.set_time = remote_set_time,
+	.ioctl = alpha_rtc_ioctl,
+};
+#endif
+
+static int __init
+alpha_rtc_init(void)
+{
+	struct platform_device *pdev;
+	struct rtc_device *rtc;
+
+	init_rtc_epoch();
+
+	pdev = platform_device_register_simple("rtc-alpha", -1, NULL, 0);
+	rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(pdev, rtc);
+	rtc->ops = &alpha_rtc_ops;
+
+#ifdef HAVE_REMOTE_RTC
+	if (alpha_mv.rtc_boot_cpu_only)
+		rtc->ops = &remote_rtc_ops;
+#endif
+
+	return devm_rtc_register_device(rtc);
+}
+device_initcall(alpha_rtc_init);
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
new file mode 100644
index 0000000000..c80258ec33
--- /dev/null
+++ b/arch/alpha/kernel/setup.c
@@ -0,0 +1,1457 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ */
+
+/* 2.3.x bootmem, 1999 Andrea Arcangeli <andrea@suse.de> */
+
+/*
+ * Bootup setup stuff.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/screen_info.h>
+#include <linux/delay.h>
+#include <linux/mc146818rtc.h>
+#include <linux/console.h>
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/panic_notifier.h>
+#include <linux/platform_device.h>
+#include <linux/memblock.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/eisa.h>
+#include <linux/pfn.h>
+#ifdef CONFIG_MAGIC_SYSRQ
+#include <linux/sysrq.h>
+#include <linux/reboot.h>
+#endif
+#include <linux/notifier.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <linux/log2.h>
+#include <linux/export.h>
+
+static int alpha_panic_event(struct notifier_block *, unsigned long, void *);
+static struct notifier_block alpha_panic_block = {
+	alpha_panic_event,
+        NULL,
+        INT_MAX /* try to do it first */
+};
+
+#include <linux/uaccess.h>
+#include <asm/hwrpb.h>
+#include <asm/dma.h>
+#include <asm/mmu_context.h>
+#include <asm/console.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+
+struct hwrpb_struct *hwrpb;
+EXPORT_SYMBOL(hwrpb);
+unsigned long srm_hae;
+
+int alpha_l1i_cacheshape;
+int alpha_l1d_cacheshape;
+int alpha_l2_cacheshape;
+int alpha_l3_cacheshape;
+
+#ifdef CONFIG_VERBOSE_MCHECK
+/* 0=minimum, 1=verbose, 2=all */
+/* These can be overridden via the command line, ie "verbose_mcheck=2") */
+unsigned long alpha_verbose_mcheck = CONFIG_VERBOSE_MCHECK_ON;
+#endif
+
+/* Which processor we booted from.  */
+int boot_cpuid;
+
+/*
+ * Using SRM callbacks for initial console output. This works from
+ * setup_arch() time through the end of time_init(), as those places
+ * are under our (Alpha) control.
+
+ * "srmcons" specified in the boot command arguments allows us to
+ * see kernel messages during the period of time before the true
+ * console device is "registered" during console_init(). 
+ * As of this version (2.5.59), console_init() will call
+ * disable_early_printk() as the last action before initializing
+ * the console drivers. That's the last possible time srmcons can be 
+ * unregistered without interfering with console behavior.
+ *
+ * By default, OFF; set it with a bootcommand arg of "srmcons" or 
+ * "console=srm". The meaning of these two args is:
+ *     "srmcons"     - early callback prints 
+ *     "console=srm" - full callback based console, including early prints
+ */
+int srmcons_output = 0;
+
+/* Enforce a memory size limit; useful for testing. By default, none. */
+unsigned long mem_size_limit = 0;
+
+/* Set AGP GART window size (0 means disabled). */
+unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE;
+
+#ifdef CONFIG_ALPHA_GENERIC
+struct alpha_machine_vector alpha_mv;
+EXPORT_SYMBOL(alpha_mv);
+#endif
+
+#ifndef alpha_using_srm
+int alpha_using_srm;
+EXPORT_SYMBOL(alpha_using_srm);
+#endif
+
+#ifndef alpha_using_qemu
+int alpha_using_qemu;
+#endif
+
+static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long,
+					       unsigned long);
+static struct alpha_machine_vector *get_sysvec_byname(const char *);
+static void get_sysnames(unsigned long, unsigned long, unsigned long,
+			 char **, char **);
+static void determine_cpu_caches (unsigned int);
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+
+/*
+ * The format of "screen_info" is strange, and due to early
+ * i386-setup code. This is just enough to make the console
+ * code think we're on a VGA color display.
+ */
+
+struct screen_info screen_info = {
+	.orig_x = 0,
+	.orig_y = 25,
+	.orig_video_cols = 80,
+	.orig_video_lines = 25,
+	.orig_video_isVGA = 1,
+	.orig_video_points = 16
+};
+
+EXPORT_SYMBOL(screen_info);
+
+/*
+ * The direct map I/O window, if any.  This should be the same
+ * for all busses, since it's used by virt_to_bus.
+ */
+
+unsigned long __direct_map_base;
+unsigned long __direct_map_size;
+EXPORT_SYMBOL(__direct_map_base);
+EXPORT_SYMBOL(__direct_map_size);
+
+/*
+ * Declare all of the machine vectors.
+ */
+
+/* GCC 2.7.2 (on alpha at least) is lame.  It does not support either 
+   __attribute__((weak)) or #pragma weak.  Bypass it and talk directly
+   to the assembler.  */
+
+#define WEAK(X) \
+	extern struct alpha_machine_vector X; \
+	asm(".weak "#X)
+
+WEAK(alcor_mv);
+WEAK(alphabook1_mv);
+WEAK(avanti_mv);
+WEAK(cabriolet_mv);
+WEAK(clipper_mv);
+WEAK(dp264_mv);
+WEAK(eb164_mv);
+WEAK(eb64p_mv);
+WEAK(eb66_mv);
+WEAK(eb66p_mv);
+WEAK(eiger_mv);
+WEAK(jensen_mv);
+WEAK(lx164_mv);
+WEAK(lynx_mv);
+WEAK(marvel_ev7_mv);
+WEAK(miata_mv);
+WEAK(mikasa_mv);
+WEAK(mikasa_primo_mv);
+WEAK(monet_mv);
+WEAK(nautilus_mv);
+WEAK(noname_mv);
+WEAK(noritake_mv);
+WEAK(noritake_primo_mv);
+WEAK(p2k_mv);
+WEAK(pc164_mv);
+WEAK(privateer_mv);
+WEAK(rawhide_mv);
+WEAK(ruffian_mv);
+WEAK(rx164_mv);
+WEAK(sable_mv);
+WEAK(sable_gamma_mv);
+WEAK(shark_mv);
+WEAK(sx164_mv);
+WEAK(takara_mv);
+WEAK(titan_mv);
+WEAK(webbrick_mv);
+WEAK(wildfire_mv);
+WEAK(xl_mv);
+WEAK(xlt_mv);
+
+#undef WEAK
+
+/*
+ * I/O resources inherited from PeeCees.  Except for perhaps the
+ * turbochannel alphas, everyone has these on some sort of SuperIO chip.
+ *
+ * ??? If this becomes less standard, move the struct out into the
+ * machine vector.
+ */
+
+static void __init
+reserve_std_resources(void)
+{
+	static struct resource standard_io_resources[] = {
+		{ .name = "rtc", .start = -1, .end = -1 },
+        	{ .name = "dma1", .start = 0x00, .end = 0x1f },
+        	{ .name = "pic1", .start = 0x20, .end = 0x3f },
+        	{ .name = "timer", .start = 0x40, .end = 0x5f },
+        	{ .name = "keyboard", .start = 0x60, .end = 0x6f },
+        	{ .name = "dma page reg", .start = 0x80, .end = 0x8f },
+        	{ .name = "pic2", .start = 0xa0, .end = 0xbf },
+        	{ .name = "dma2", .start = 0xc0, .end = 0xdf },
+	};
+
+	struct resource *io = &ioport_resource;
+	size_t i;
+
+	if (hose_head) {
+		struct pci_controller *hose;
+		for (hose = hose_head; hose; hose = hose->next)
+			if (hose->index == 0) {
+				io = hose->io_space;
+				break;
+			}
+	}
+
+	/* Fix up for the Jensen's queer RTC placement.  */
+	standard_io_resources[0].start = RTC_PORT(0);
+	standard_io_resources[0].end = RTC_PORT(0) + 0x0f;
+
+	for (i = 0; i < ARRAY_SIZE(standard_io_resources); ++i)
+		request_resource(io, standard_io_resources+i);
+}
+
+#define PFN_MAX		PFN_DOWN(0x80000000)
+#define for_each_mem_cluster(memdesc, _cluster, i)		\
+	for ((_cluster) = (memdesc)->cluster, (i) = 0;		\
+	     (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
+
+static unsigned long __init
+get_mem_size_limit(char *s)
+{
+        unsigned long end = 0;
+        char *from = s;
+
+        end = simple_strtoul(from, &from, 0);
+        if ( *from == 'K' || *from == 'k' ) {
+                end = end << 10;
+                from++;
+        } else if ( *from == 'M' || *from == 'm' ) {
+                end = end << 20;
+                from++;
+        } else if ( *from == 'G' || *from == 'g' ) {
+                end = end << 30;
+                from++;
+        }
+        return end >> PAGE_SHIFT; /* Return the PFN of the limit. */
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void * __init
+move_initrd(unsigned long mem_limit)
+{
+	void *start;
+	unsigned long size;
+
+	size = initrd_end - initrd_start;
+	start = memblock_alloc(PAGE_ALIGN(size), PAGE_SIZE);
+	if (!start || __pa(start) + size > mem_limit) {
+		initrd_start = initrd_end = 0;
+		return NULL;
+	}
+	memmove(start, (void *)initrd_start, size);
+	initrd_start = (unsigned long)start;
+	initrd_end = initrd_start + size;
+	printk("initrd moved to %p\n", start);
+	return start;
+}
+#endif
+
+static void __init
+setup_memory(void *kernel_end)
+{
+	struct memclust_struct * cluster;
+	struct memdesc_struct * memdesc;
+	unsigned long kernel_size;
+	unsigned long i;
+
+	/* Find free clusters, and init and free the bootmem accordingly.  */
+	memdesc = (struct memdesc_struct *)
+	  (hwrpb->mddt_offset + (unsigned long) hwrpb);
+
+	for_each_mem_cluster(memdesc, cluster, i) {
+		unsigned long end;
+
+		printk("memcluster %lu, usage %01lx, start %8lu, end %8lu\n",
+		       i, cluster->usage, cluster->start_pfn,
+		       cluster->start_pfn + cluster->numpages);
+
+		end = cluster->start_pfn + cluster->numpages;
+		if (end > max_low_pfn)
+			max_low_pfn = end;
+
+		memblock_add(PFN_PHYS(cluster->start_pfn),
+			     cluster->numpages << PAGE_SHIFT);
+
+		/* Bit 0 is console/PALcode reserved.  Bit 1 is
+		   non-volatile memory -- we might want to mark
+		   this for later.  */
+		if (cluster->usage & 3)
+			memblock_reserve(PFN_PHYS(cluster->start_pfn),
+				         cluster->numpages << PAGE_SHIFT);
+	}
+
+	/*
+	 * Except for the NUMA systems (wildfire, marvel) all of the 
+	 * Alpha systems we run on support 32GB of memory or less.
+	 * Since the NUMA systems introduce large holes in memory addressing,
+	 * we can get into a situation where there is not enough contiguous
+	 * memory for the memory map. 
+	 *
+	 * Limit memory to the first 32GB to limit the NUMA systems to 
+	 * memory on their first node (wildfire) or 2 (marvel) to avoid 
+	 * not being able to produce the memory map. In order to access 
+	 * all of the memory on the NUMA systems, build with discontiguous
+	 * memory support.
+	 *
+	 * If the user specified a memory limit, let that memory limit stand.
+	 */
+	if (!mem_size_limit) 
+		mem_size_limit = (32ul * 1024 * 1024 * 1024) >> PAGE_SHIFT;
+
+	if (mem_size_limit && max_low_pfn >= mem_size_limit)
+	{
+		printk("setup: forcing memory size to %ldK (from %ldK).\n",
+		       mem_size_limit << (PAGE_SHIFT - 10),
+		       max_low_pfn    << (PAGE_SHIFT - 10));
+		max_low_pfn = mem_size_limit;
+	}
+
+	/* Reserve the kernel memory. */
+	kernel_size = virt_to_phys(kernel_end) - KERNEL_START_PHYS;
+	memblock_reserve(KERNEL_START_PHYS, kernel_size);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	initrd_start = INITRD_START;
+	if (initrd_start) {
+		initrd_end = initrd_start+INITRD_SIZE;
+		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
+		       (void *) initrd_start, INITRD_SIZE);
+
+		if ((void *)initrd_end > phys_to_virt(PFN_PHYS(max_low_pfn))) {
+			if (!move_initrd(PFN_PHYS(max_low_pfn)))
+				printk("initrd extends beyond end of memory "
+				       "(0x%08lx > 0x%p)\ndisabling initrd\n",
+				       initrd_end,
+				       phys_to_virt(PFN_PHYS(max_low_pfn)));
+		} else {
+			memblock_reserve(virt_to_phys((void *)initrd_start),
+					INITRD_SIZE);
+		}
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+}
+
+int page_is_ram(unsigned long pfn)
+{
+	struct memclust_struct * cluster;
+	struct memdesc_struct * memdesc;
+	unsigned long i;
+
+	memdesc = (struct memdesc_struct *)
+		(hwrpb->mddt_offset + (unsigned long) hwrpb);
+	for_each_mem_cluster(memdesc, cluster, i)
+	{
+		if (pfn >= cluster->start_pfn  &&
+		    pfn < cluster->start_pfn + cluster->numpages) {
+			return (cluster->usage & 3) ? 0 : 1;
+		}
+	}
+
+	return 0;
+}
+
+static int __init
+register_cpus(void)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL);
+		if (!p)
+			return -ENOMEM;
+		register_cpu(p, i);
+	}
+	return 0;
+}
+
+arch_initcall(register_cpus);
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static void sysrq_reboot_handler(u8 unused)
+{
+	machine_halt();
+}
+
+static const struct sysrq_key_op srm_sysrq_reboot_op = {
+	.handler	= sysrq_reboot_handler,
+	.help_msg       = "reboot(b)",
+	.action_msg     = "Resetting",
+	.enable_mask    = SYSRQ_ENABLE_BOOT,
+};
+#endif
+
+void __init
+setup_arch(char **cmdline_p)
+{
+	extern char _end[];
+
+	struct alpha_machine_vector *vec = NULL;
+	struct percpu_struct *cpu;
+	char *type_name, *var_name, *p;
+	void *kernel_end = _end; /* end of kernel */
+	char *args = command_line;
+
+	hwrpb = (struct hwrpb_struct*) __va(INIT_HWRPB->phys_addr);
+	boot_cpuid = hard_smp_processor_id();
+
+        /*
+	 * Pre-process the system type to make sure it will be valid.
+	 *
+	 * This may restore real CABRIO and EB66+ family names, ie
+	 * EB64+ and EB66.
+	 *
+	 * Oh, and "white box" AS800 (aka DIGITAL Server 3000 series)
+	 * and AS1200 (DIGITAL Server 5000 series) have the type as
+	 * the negative of the real one.
+	 */
+        if ((long)hwrpb->sys_type < 0) {
+		hwrpb->sys_type = -((long)hwrpb->sys_type);
+		hwrpb_update_checksum(hwrpb);
+	}
+
+	/* Register a call for panic conditions. */
+	atomic_notifier_chain_register(&panic_notifier_list,
+			&alpha_panic_block);
+
+#ifndef alpha_using_srm
+	/* Assume that we've booted from SRM if we haven't booted from MILO.
+	   Detect the later by looking for "MILO" in the system serial nr.  */
+	alpha_using_srm = !str_has_prefix((const char *)hwrpb->ssn, "MILO");
+#endif
+#ifndef alpha_using_qemu
+	/* Similarly, look for QEMU.  */
+	alpha_using_qemu = strstr((const char *)hwrpb->ssn, "QEMU") != 0;
+#endif
+
+	/* If we are using SRM, we want to allow callbacks
+	   as early as possible, so do this NOW, and then
+	   they should work immediately thereafter.
+	*/
+	kernel_end = callback_init(kernel_end);
+
+	/* 
+	 * Locate the command line.
+	 */
+	/* Hack for Jensen... since we're restricted to 8 or 16 chars for
+	   boot flags depending on the boot mode, we need some shorthand.
+	   This should do for installation.  */
+	if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
+		strscpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof(command_line));
+	} else {
+		strscpy(command_line, COMMAND_LINE, sizeof(command_line));
+	}
+	strcpy(boot_command_line, command_line);
+	*cmdline_p = command_line;
+
+	/* 
+	 * Process command-line arguments.
+	 */
+	while ((p = strsep(&args, " \t")) != NULL) {
+		if (!*p) continue;
+		if (strncmp(p, "alpha_mv=", 9) == 0) {
+			vec = get_sysvec_byname(p+9);
+			continue;
+		}
+		if (strncmp(p, "cycle=", 6) == 0) {
+			est_cycle_freq = simple_strtol(p+6, NULL, 0);
+			continue;
+		}
+		if (strncmp(p, "mem=", 4) == 0) {
+			mem_size_limit = get_mem_size_limit(p+4);
+			continue;
+		}
+		if (strncmp(p, "srmcons", 7) == 0) {
+			srmcons_output |= 1;
+			continue;
+		}
+		if (strncmp(p, "console=srm", 11) == 0) {
+			srmcons_output |= 2;
+			continue;
+		}
+		if (strncmp(p, "gartsize=", 9) == 0) {
+			alpha_agpgart_size =
+				get_mem_size_limit(p+9) << PAGE_SHIFT;
+			continue;
+		}
+#ifdef CONFIG_VERBOSE_MCHECK
+		if (strncmp(p, "verbose_mcheck=", 15) == 0) {
+			alpha_verbose_mcheck = simple_strtol(p+15, NULL, 0);
+			continue;
+		}
+#endif
+	}
+
+	/* Replace the command line, now that we've killed it with strsep.  */
+	strcpy(command_line, boot_command_line);
+
+	/* If we want SRM console printk echoing early, do it now. */
+	if (alpha_using_srm && srmcons_output) {
+		register_srm_console();
+
+		/*
+		 * If "console=srm" was specified, clear the srmcons_output
+		 * flag now so that time.c won't unregister_srm_console
+		 */
+		if (srmcons_output & 2)
+			srmcons_output = 0;
+	}
+
+#ifdef CONFIG_MAGIC_SYSRQ
+	/* If we're using SRM, make sysrq-b halt back to the prom,
+	   not auto-reboot.  */
+	if (alpha_using_srm) {
+		unregister_sysrq_key('b', __sysrq_reboot_op);
+		register_sysrq_key('b', &srm_sysrq_reboot_op);
+	}
+#endif
+
+	/*
+	 * Identify and reconfigure for the current system.
+	 */
+	cpu = (struct percpu_struct*)((char*)hwrpb + hwrpb->processor_offset);
+
+	get_sysnames(hwrpb->sys_type, hwrpb->sys_variation,
+		     cpu->type, &type_name, &var_name);
+	if (*var_name == '0')
+		var_name = "";
+
+	if (!vec) {
+		vec = get_sysvec(hwrpb->sys_type, hwrpb->sys_variation,
+				 cpu->type);
+	}
+
+	if (!vec) {
+		panic("Unsupported system type: %s%s%s (%ld %ld)\n",
+		      type_name, (*var_name ? " variation " : ""), var_name,
+		      hwrpb->sys_type, hwrpb->sys_variation);
+	}
+	if (vec != &alpha_mv) {
+		alpha_mv = *vec;
+	}
+	
+	printk("Booting "
+#ifdef CONFIG_ALPHA_GENERIC
+	       "GENERIC "
+#endif
+	       "on %s%s%s using machine vector %s from %s\n",
+	       type_name, (*var_name ? " variation " : ""),
+	       var_name, alpha_mv.vector_name,
+	       (alpha_using_srm ? "SRM" : "MILO"));
+
+	printk("Major Options: "
+#ifdef CONFIG_SMP
+	       "SMP "
+#endif
+#ifdef CONFIG_ALPHA_EV56
+	       "EV56 "
+#endif
+#ifdef CONFIG_ALPHA_EV67
+	       "EV67 "
+#endif
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+	       "LEGACY_START "
+#endif
+#ifdef CONFIG_VERBOSE_MCHECK
+	       "VERBOSE_MCHECK "
+#endif
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+	       "DEBUG_SPINLOCK "
+#endif
+#ifdef CONFIG_MAGIC_SYSRQ
+	       "MAGIC_SYSRQ "
+#endif
+	       "\n");
+
+	printk("Command line: %s\n", command_line);
+
+	/* 
+	 * Sync up the HAE.
+	 * Save the SRM's current value for restoration.
+	 */
+	srm_hae = *alpha_mv.hae_register;
+	__set_hae(alpha_mv.hae_cache);
+
+	/* Reset enable correctable error reports.  */
+	wrmces(0x7);
+
+	/* Find our memory.  */
+	setup_memory(kernel_end);
+	memblock_set_bottom_up(true);
+	sparse_init();
+
+	/* First guess at cpu cache sizes.  Do this before init_arch.  */
+	determine_cpu_caches(cpu->type);
+
+	/* Initialize the machine.  Usually has to do with setting up
+	   DMA windows and the like.  */
+	if (alpha_mv.init_arch)
+		alpha_mv.init_arch();
+
+	/* Reserve standard resources.  */
+	reserve_std_resources();
+
+	/* 
+	 * Give us a default console.  TGA users will see nothing until
+	 * chr_dev_init is called, rather late in the boot sequence.
+	 */
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+#endif
+#endif
+
+	/* Default root filesystem to sda2.  */
+	ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 2);
+
+#ifdef CONFIG_EISA
+	/* FIXME:  only set this when we actually have EISA in this box? */
+	EISA_bus = 1;
+#endif
+
+ 	/*
+	 * Check ASN in HWRPB for validity, report if bad.
+	 * FIXME: how was this failing?  Should we trust it instead,
+	 * and copy the value into alpha_mv.max_asn?
+ 	 */
+
+ 	if (hwrpb->max_asn != MAX_ASN) {
+		printk("Max ASN from HWRPB is bad (0x%lx)\n", hwrpb->max_asn);
+ 	}
+
+	/*
+	 * Identify the flock of penguins.
+	 */
+
+#ifdef CONFIG_SMP
+	setup_smp();
+#endif
+	paging_init();
+}
+
+static char sys_unknown[] = "Unknown";
+static char systype_names[][16] = {
+	"0",
+	"ADU", "Cobra", "Ruby", "Flamingo", "Mannequin", "Jensen",
+	"Pelican", "Morgan", "Sable", "Medulla", "Noname",
+	"Turbolaser", "Avanti", "Mustang", "Alcor", "Tradewind",
+	"Mikasa", "EB64", "EB66", "EB64+", "AlphaBook1",
+	"Rawhide", "K2", "Lynx", "XL", "EB164", "Noritake",
+	"Cortex", "29", "Miata", "XXM", "Takara", "Yukon",
+	"Tsunami", "Wildfire", "CUSCO", "Eiger", "Titan", "Marvel"
+};
+
+static char unofficial_names[][8] = {"100", "Ruffian"};
+
+static char api_names[][16] = {"200", "Nautilus"};
+
+static char eb164_names[][8] = {"EB164", "PC164", "LX164", "SX164", "RX164"};
+static int eb164_indices[] = {0,0,0,1,1,1,1,1,2,2,2,2,3,3,3,3,4};
+
+static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
+static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
+
+static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
+static int eb64p_indices[] = {0,0,1,2};
+
+static char eb66_names[][8] = {"EB66", "EB66+"};
+static int eb66_indices[] = {0,0,1};
+
+static char marvel_names[][16] = {
+	"Marvel/EV7"
+};
+static int marvel_indices[] = { 0 };
+
+static char rawhide_names[][16] = {
+	"Dodge", "Wrangler", "Durango", "Tincup", "DaVinci"
+};
+static int rawhide_indices[] = {0,0,0,1,1,2,2,3,3,4,4};
+
+static char titan_names[][16] = {
+	"DEFAULT", "Privateer", "Falcon", "Granite"
+};
+static int titan_indices[] = {0,1,2,2,3};
+
+static char tsunami_names[][16] = {
+	"0", "DP264", "Warhol", "Windjammer", "Monet", "Clipper",
+	"Goldrush", "Webbrick", "Catamaran", "Brisbane", "Melbourne",
+	"Flying Clipper", "Shark"
+};
+static int tsunami_indices[] = {0,1,2,3,4,5,6,7,8,9,10,11,12};
+
+static struct alpha_machine_vector * __init
+get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
+{
+	static struct alpha_machine_vector *systype_vecs[] __initdata =
+	{
+		NULL,		/* 0 */
+		NULL,		/* ADU */
+		NULL,		/* Cobra */
+		NULL,		/* Ruby */
+		NULL,		/* Flamingo */
+		NULL,		/* Mannequin */
+		&jensen_mv,
+		NULL, 		/* Pelican */
+		NULL,		/* Morgan */
+		NULL,		/* Sable -- see below.  */
+		NULL,		/* Medulla */
+		&noname_mv,
+		NULL,		/* Turbolaser */
+		&avanti_mv,
+		NULL,		/* Mustang */
+		NULL,		/* Alcor, Bret, Maverick. HWRPB inaccurate? */
+		NULL,		/* Tradewind */
+		NULL,		/* Mikasa -- see below.  */
+		NULL,		/* EB64 */
+		NULL,		/* EB66 -- see variation.  */
+		NULL,		/* EB64+ -- see variation.  */
+		&alphabook1_mv,
+		&rawhide_mv,
+		NULL,		/* K2 */
+		&lynx_mv,	/* Lynx */
+		&xl_mv,
+		NULL,		/* EB164 -- see variation.  */
+		NULL,		/* Noritake -- see below.  */
+		NULL,		/* Cortex */
+		NULL,		/* 29 */
+		&miata_mv,
+		NULL,		/* XXM */
+		&takara_mv,
+		NULL,		/* Yukon */
+		NULL,		/* Tsunami -- see variation.  */
+		&wildfire_mv,	/* Wildfire */
+		NULL,		/* CUSCO */
+		&eiger_mv,	/* Eiger */
+		NULL,		/* Titan */
+		NULL,		/* Marvel */
+	};
+
+	static struct alpha_machine_vector *unofficial_vecs[] __initdata =
+	{
+		NULL,		/* 100 */
+		&ruffian_mv,
+	};
+
+	static struct alpha_machine_vector *api_vecs[] __initdata =
+	{
+		NULL,		/* 200 */
+		&nautilus_mv,
+	};
+
+	static struct alpha_machine_vector *alcor_vecs[] __initdata = 
+	{
+		&alcor_mv, &xlt_mv, &xlt_mv
+	};
+
+	static struct alpha_machine_vector *eb164_vecs[] __initdata =
+	{
+		&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
+	};
+
+	static struct alpha_machine_vector *eb64p_vecs[] __initdata =
+	{
+		&eb64p_mv,
+		&cabriolet_mv,
+		&cabriolet_mv		/* AlphaPCI64 */
+	};
+
+	static struct alpha_machine_vector *eb66_vecs[] __initdata =
+	{
+		&eb66_mv,
+		&eb66p_mv
+	};
+
+	static struct alpha_machine_vector *marvel_vecs[] __initdata =
+	{
+		&marvel_ev7_mv,
+	};
+
+	static struct alpha_machine_vector *titan_vecs[] __initdata =
+	{
+		&titan_mv,		/* default   */
+		&privateer_mv,		/* privateer */
+		&titan_mv,		/* falcon    */
+		&privateer_mv,		/* granite   */
+	};
+
+	static struct alpha_machine_vector *tsunami_vecs[]  __initdata =
+	{
+		NULL,
+		&dp264_mv,		/* dp264 */
+		&dp264_mv,		/* warhol */
+		&dp264_mv,		/* windjammer */
+		&monet_mv,		/* monet */
+		&clipper_mv,		/* clipper */
+		&dp264_mv,		/* goldrush */
+		&webbrick_mv,		/* webbrick */
+		&dp264_mv,		/* catamaran */
+		NULL,			/* brisbane? */
+		NULL,			/* melbourne? */
+		NULL,			/* flying clipper? */
+		&shark_mv,		/* shark */
+	};
+
+	/* ??? Do we need to distinguish between Rawhides?  */
+
+	struct alpha_machine_vector *vec;
+
+	/* Search the system tables first... */
+	vec = NULL;
+	if (type < ARRAY_SIZE(systype_vecs)) {
+		vec = systype_vecs[type];
+	} else if ((type > ST_API_BIAS) &&
+		   (type - ST_API_BIAS) < ARRAY_SIZE(api_vecs)) {
+		vec = api_vecs[type - ST_API_BIAS];
+	} else if ((type > ST_UNOFFICIAL_BIAS) &&
+		   (type - ST_UNOFFICIAL_BIAS) < ARRAY_SIZE(unofficial_vecs)) {
+		vec = unofficial_vecs[type - ST_UNOFFICIAL_BIAS];
+	}
+
+	/* If we've not found one, try for a variation.  */
+
+	if (!vec) {
+		/* Member ID is a bit-field. */
+		unsigned long member = (variation >> 10) & 0x3f;
+
+		cpu &= 0xffffffff; /* make it usable */
+
+		switch (type) {
+		case ST_DEC_ALCOR:
+			if (member < ARRAY_SIZE(alcor_indices))
+				vec = alcor_vecs[alcor_indices[member]];
+			break;
+		case ST_DEC_EB164:
+			if (member < ARRAY_SIZE(eb164_indices))
+				vec = eb164_vecs[eb164_indices[member]];
+			/* PC164 may show as EB164 variation with EV56 CPU,
+			   but, since no true EB164 had anything but EV5... */
+			if (vec == &eb164_mv && cpu == EV56_CPU)
+				vec = &pc164_mv;
+			break;
+		case ST_DEC_EB64P:
+			if (member < ARRAY_SIZE(eb64p_indices))
+				vec = eb64p_vecs[eb64p_indices[member]];
+			break;
+		case ST_DEC_EB66:
+			if (member < ARRAY_SIZE(eb66_indices))
+				vec = eb66_vecs[eb66_indices[member]];
+			break;
+		case ST_DEC_MARVEL:
+			if (member < ARRAY_SIZE(marvel_indices))
+				vec = marvel_vecs[marvel_indices[member]];
+			break;
+		case ST_DEC_TITAN:
+			vec = titan_vecs[0];	/* default */
+			if (member < ARRAY_SIZE(titan_indices))
+				vec = titan_vecs[titan_indices[member]];
+			break;
+		case ST_DEC_TSUNAMI:
+			if (member < ARRAY_SIZE(tsunami_indices))
+				vec = tsunami_vecs[tsunami_indices[member]];
+			break;
+		case ST_DEC_1000:
+			if (cpu == EV5_CPU || cpu == EV56_CPU)
+				vec = &mikasa_primo_mv;
+			else
+				vec = &mikasa_mv;
+			break;
+		case ST_DEC_NORITAKE:
+			if (cpu == EV5_CPU || cpu == EV56_CPU)
+				vec = &noritake_primo_mv;
+			else
+				vec = &noritake_mv;
+			break;
+		case ST_DEC_2100_A500:
+			if (cpu == EV5_CPU || cpu == EV56_CPU)
+				vec = &sable_gamma_mv;
+			else
+				vec = &sable_mv;
+			break;
+		}
+	}
+	return vec;
+}
+
+static struct alpha_machine_vector * __init
+get_sysvec_byname(const char *name)
+{
+	static struct alpha_machine_vector *all_vecs[] __initdata =
+	{
+		&alcor_mv,
+		&alphabook1_mv,
+		&avanti_mv,
+		&cabriolet_mv,
+		&clipper_mv,
+		&dp264_mv,
+		&eb164_mv,
+		&eb64p_mv,
+		&eb66_mv,
+		&eb66p_mv,
+		&eiger_mv,
+		&jensen_mv,
+		&lx164_mv,
+		&lynx_mv,
+		&miata_mv,
+		&mikasa_mv,
+		&mikasa_primo_mv,
+		&monet_mv,
+		&nautilus_mv,
+		&noname_mv,
+		&noritake_mv,
+		&noritake_primo_mv,
+		&p2k_mv,
+		&pc164_mv,
+		&privateer_mv,
+		&rawhide_mv,
+		&ruffian_mv,
+		&rx164_mv,
+		&sable_mv,
+		&sable_gamma_mv,
+		&shark_mv,
+		&sx164_mv,
+		&takara_mv,
+		&webbrick_mv,
+		&wildfire_mv,
+		&xl_mv,
+		&xlt_mv
+	};
+
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(all_vecs); ++i) {
+		struct alpha_machine_vector *mv = all_vecs[i];
+		if (strcasecmp(mv->vector_name, name) == 0)
+			return mv;
+	}
+	return NULL;
+}
+
+static void
+get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
+	     char **type_name, char **variation_name)
+{
+	unsigned long member;
+
+	/* If not in the tables, make it UNKNOWN,
+	   else set type name to family */
+	if (type < ARRAY_SIZE(systype_names)) {
+		*type_name = systype_names[type];
+	} else if ((type > ST_API_BIAS) &&
+		   (type - ST_API_BIAS) < ARRAY_SIZE(api_names)) {
+		*type_name = api_names[type - ST_API_BIAS];
+	} else if ((type > ST_UNOFFICIAL_BIAS) &&
+		   (type - ST_UNOFFICIAL_BIAS) < ARRAY_SIZE(unofficial_names)) {
+		*type_name = unofficial_names[type - ST_UNOFFICIAL_BIAS];
+	} else {
+		*type_name = sys_unknown;
+		*variation_name = sys_unknown;
+		return;
+	}
+
+	/* Set variation to "0"; if variation is zero, done.  */
+	*variation_name = systype_names[0];
+	if (variation == 0) {
+		return;
+	}
+
+	member = (variation >> 10) & 0x3f; /* member ID is a bit-field */
+
+	cpu &= 0xffffffff; /* make it usable */
+
+	switch (type) { /* select by family */
+	default: /* default to variation "0" for now */
+		break;
+	case ST_DEC_EB164:
+		if (member >= ARRAY_SIZE(eb164_indices))
+			break;
+		*variation_name = eb164_names[eb164_indices[member]];
+		/* PC164 may show as EB164 variation, but with EV56 CPU,
+		   so, since no true EB164 had anything but EV5... */
+		if (eb164_indices[member] == 0 && cpu == EV56_CPU)
+			*variation_name = eb164_names[1]; /* make it PC164 */
+		break;
+	case ST_DEC_ALCOR:
+		if (member < ARRAY_SIZE(alcor_indices))
+			*variation_name = alcor_names[alcor_indices[member]];
+		break;
+	case ST_DEC_EB64P:
+		if (member < ARRAY_SIZE(eb64p_indices))
+			*variation_name = eb64p_names[eb64p_indices[member]];
+		break;
+	case ST_DEC_EB66:
+		if (member < ARRAY_SIZE(eb66_indices))
+			*variation_name = eb66_names[eb66_indices[member]];
+		break;
+	case ST_DEC_MARVEL:
+		if (member < ARRAY_SIZE(marvel_indices))
+			*variation_name = marvel_names[marvel_indices[member]];
+		break;
+	case ST_DEC_RAWHIDE:
+		if (member < ARRAY_SIZE(rawhide_indices))
+			*variation_name = rawhide_names[rawhide_indices[member]];
+		break;
+	case ST_DEC_TITAN:
+		*variation_name = titan_names[0];	/* default */
+		if (member < ARRAY_SIZE(titan_indices))
+			*variation_name = titan_names[titan_indices[member]];
+		break;
+	case ST_DEC_TSUNAMI:
+		if (member < ARRAY_SIZE(tsunami_indices))
+			*variation_name = tsunami_names[tsunami_indices[member]];
+		break;
+	}
+}
+
+/*
+ * A change was made to the HWRPB via an ECO and the following code
+ * tracks a part of the ECO.  In HWRPB versions less than 5, the ECO
+ * was not implemented in the console firmware.  If it's revision 5 or
+ * greater we can get the name of the platform as an ASCII string from
+ * the HWRPB.  That's what this function does.  It checks the revision
+ * level and if the string is in the HWRPB it returns the address of
+ * the string--a pointer to the name of the platform.
+ *
+ * Returns:
+ *      - Pointer to a ASCII string if it's in the HWRPB
+ *      - Pointer to a blank string if the data is not in the HWRPB.
+ */
+
+static char *
+platform_string(void)
+{
+	struct dsr_struct *dsr;
+	static char unk_system_string[] = "N/A";
+
+	/* Go to the console for the string pointer.
+	 * If the rpb_vers is not 5 or greater the rpb
+	 * is old and does not have this data in it.
+	 */
+	if (hwrpb->revision < 5)
+		return (unk_system_string);
+	else {
+		/* The Dynamic System Recognition struct
+		 * has the system platform name starting
+		 * after the character count of the string.
+		 */
+		dsr =  ((struct dsr_struct *)
+			((char *)hwrpb + hwrpb->dsr_offset));
+		return ((char *)dsr + (dsr->sysname_off +
+				       sizeof(long)));
+	}
+}
+
+static int
+get_nr_processors(struct percpu_struct *cpubase, unsigned long num)
+{
+	struct percpu_struct *cpu;
+	unsigned long i;
+	int count = 0;
+
+	for (i = 0; i < num; i++) {
+		cpu = (struct percpu_struct *)
+			((char *)cpubase + i*hwrpb->processor_size);
+		if ((cpu->flags & 0x1cc) == 0x1cc)
+			count++;
+	}
+	return count;
+}
+
+static void
+show_cache_size (struct seq_file *f, const char *which, int shape)
+{
+	if (shape == -1)
+		seq_printf (f, "%s\t\t: n/a\n", which);
+	else if (shape == 0)
+		seq_printf (f, "%s\t\t: unknown\n", which);
+	else
+		seq_printf (f, "%s\t\t: %dK, %d-way, %db line\n",
+			    which, shape >> 10, shape & 15,
+			    1 << ((shape >> 4) & 15));
+}
+
+static int
+show_cpuinfo(struct seq_file *f, void *slot)
+{
+	extern struct unaligned_stat {
+		unsigned long count, va, pc;
+	} unaligned[2];
+
+	static char cpu_names[][8] = {
+		"EV3", "EV4", "Simulate", "LCA4", "EV5", "EV45", "EV56",
+		"EV6", "PCA56", "PCA57", "EV67", "EV68CB", "EV68AL",
+		"EV68CX", "EV7", "EV79", "EV69"
+	};
+
+	struct percpu_struct *cpu = slot;
+	unsigned int cpu_index;
+	char *cpu_name;
+	char *systype_name;
+	char *sysvariation_name;
+	int nr_processors;
+	unsigned long timer_freq;
+
+	cpu_index = (unsigned) (cpu->type - 1);
+	cpu_name = "Unknown";
+	if (cpu_index < ARRAY_SIZE(cpu_names))
+		cpu_name = cpu_names[cpu_index];
+
+	get_sysnames(hwrpb->sys_type, hwrpb->sys_variation,
+		     cpu->type, &systype_name, &sysvariation_name);
+
+	nr_processors = get_nr_processors(cpu, hwrpb->nr_processors);
+
+#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
+	timer_freq = (100UL * hwrpb->intr_freq) / 4096;
+#else
+	timer_freq = 100UL * CONFIG_HZ;
+#endif
+
+	seq_printf(f, "cpu\t\t\t: Alpha\n"
+		      "cpu model\t\t: %s\n"
+		      "cpu variation\t\t: %ld\n"
+		      "cpu revision\t\t: %ld\n"
+		      "cpu serial number\t: %s\n"
+		      "system type\t\t: %s\n"
+		      "system variation\t: %s\n"
+		      "system revision\t\t: %ld\n"
+		      "system serial number\t: %s\n"
+		      "cycle frequency [Hz]\t: %lu %s\n"
+		      "timer frequency [Hz]\t: %lu.%02lu\n"
+		      "page size [bytes]\t: %ld\n"
+		      "phys. address bits\t: %ld\n"
+		      "max. addr. space #\t: %ld\n"
+		      "BogoMIPS\t\t: %lu.%02lu\n"
+		      "kernel unaligned acc\t: %ld (pc=%lx,va=%lx)\n"
+		      "user unaligned acc\t: %ld (pc=%lx,va=%lx)\n"
+		      "platform string\t\t: %s\n"
+		      "cpus detected\t\t: %d\n",
+		       cpu_name, cpu->variation, cpu->revision,
+		       (char*)cpu->serial_no,
+		       systype_name, sysvariation_name, hwrpb->sys_revision,
+		       (char*)hwrpb->ssn,
+		       est_cycle_freq ? : hwrpb->cycle_freq,
+		       est_cycle_freq ? "est." : "",
+		       timer_freq / 100, timer_freq % 100,
+		       hwrpb->pagesize,
+		       hwrpb->pa_bits,
+		       hwrpb->max_asn,
+		       loops_per_jiffy / (500000/HZ),
+		       (loops_per_jiffy / (5000/HZ)) % 100,
+		       unaligned[0].count, unaligned[0].pc, unaligned[0].va,
+		       unaligned[1].count, unaligned[1].pc, unaligned[1].va,
+		       platform_string(), nr_processors);
+
+#ifdef CONFIG_SMP
+	seq_printf(f, "cpus active\t\t: %u\n"
+		      "cpu active mask\t\t: %016lx\n",
+		       num_online_cpus(), cpumask_bits(cpu_possible_mask)[0]);
+#endif
+
+	show_cache_size (f, "L1 Icache", alpha_l1i_cacheshape);
+	show_cache_size (f, "L1 Dcache", alpha_l1d_cacheshape);
+	show_cache_size (f, "L2 cache", alpha_l2_cacheshape);
+	show_cache_size (f, "L3 cache", alpha_l3_cacheshape);
+
+	return 0;
+}
+
+static int __init
+read_mem_block(int *addr, int stride, int size)
+{
+	long nloads = size / stride, cnt, tmp;
+
+	__asm__ __volatile__(
+	"	rpcc    %0\n"
+	"1:	ldl	%3,0(%2)\n"
+	"	subq	%1,1,%1\n"
+	/* Next two XORs introduce an explicit data dependency between
+	   consecutive loads in the loop, which will give us true load
+	   latency. */
+	"	xor	%3,%2,%2\n"
+	"	xor	%3,%2,%2\n"
+	"	addq	%2,%4,%2\n"
+	"	bne	%1,1b\n"
+	"	rpcc	%3\n"
+	"	subl	%3,%0,%0\n"
+	: "=&r" (cnt), "=&r" (nloads), "=&r" (addr), "=&r" (tmp)
+	: "r" (stride), "1" (nloads), "2" (addr));
+
+	return cnt / (size / stride);
+}
+
+#define CSHAPE(totalsize, linesize, assoc) \
+  ((totalsize & ~0xff) | (linesize << 4) | assoc)
+
+/* ??? EV5 supports up to 64M, but did the systems with more than
+   16M of BCACHE ever exist? */
+#define MAX_BCACHE_SIZE	16*1024*1024
+
+/* Note that the offchip caches are direct mapped on all Alphas. */
+static int __init
+external_cache_probe(int minsize, int width)
+{
+	int cycles, prev_cycles = 1000000;
+	int stride = 1 << width;
+	long size = minsize, maxsize = MAX_BCACHE_SIZE * 2;
+
+	if (maxsize > (max_low_pfn + 1) << PAGE_SHIFT)
+		maxsize = 1 << (ilog2(max_low_pfn + 1) + PAGE_SHIFT);
+
+	/* Get the first block cached. */
+	read_mem_block(__va(0), stride, size);
+
+	while (size < maxsize) {
+		/* Get an average load latency in cycles. */
+		cycles = read_mem_block(__va(0), stride, size);
+		if (cycles > prev_cycles * 2) {
+			/* Fine, we exceed the cache. */
+			printk("%ldK Bcache detected; load hit latency %d "
+			       "cycles, load miss latency %d cycles\n",
+			       size >> 11, prev_cycles, cycles);
+			return CSHAPE(size >> 1, width, 1);
+		}
+		/* Try to get the next block cached. */
+		read_mem_block(__va(size), stride, size);
+		prev_cycles = cycles;
+		size <<= 1;
+	}
+	return -1;	/* No BCACHE found. */
+}
+
+static void __init
+determine_cpu_caches (unsigned int cpu_type)
+{
+	int L1I, L1D, L2, L3;
+
+	switch (cpu_type) {
+	case EV4_CPU:
+	case EV45_CPU:
+	  {
+		if (cpu_type == EV4_CPU)
+			L1I = CSHAPE(8*1024, 5, 1);
+		else
+			L1I = CSHAPE(16*1024, 5, 1);
+		L1D = L1I;
+		L3 = -1;
+	
+		/* BIU_CTL is a write-only Abox register.  PALcode has a
+		   shadow copy, and may be available from some versions
+		   of the CSERVE PALcall.  If we can get it, then
+
+			unsigned long biu_ctl, size;
+			size = 128*1024 * (1 << ((biu_ctl >> 28) & 7));
+			L2 = CSHAPE (size, 5, 1);
+
+		   Unfortunately, we can't rely on that.
+		*/
+		L2 = external_cache_probe(128*1024, 5);
+		break;
+	  }
+
+	case LCA4_CPU:
+	  {
+		unsigned long car, size;
+
+		L1I = L1D = CSHAPE(8*1024, 5, 1);
+		L3 = -1;
+
+		car = *(vuip) phys_to_virt (0x120000078UL);
+		size = 64*1024 * (1 << ((car >> 5) & 7));
+		/* No typo -- 8 byte cacheline size.  Whodathunk.  */
+		L2 = (car & 1 ? CSHAPE (size, 3, 1) : -1);
+		break;
+	  }
+
+	case EV5_CPU:
+	case EV56_CPU:
+	  {
+		unsigned long sc_ctl, width;
+
+		L1I = L1D = CSHAPE(8*1024, 5, 1);
+
+		/* Check the line size of the Scache.  */
+		sc_ctl = *(vulp) phys_to_virt (0xfffff000a8UL);
+		width = sc_ctl & 0x1000 ? 6 : 5;
+		L2 = CSHAPE (96*1024, width, 3);
+
+		/* BC_CONTROL and BC_CONFIG are write-only IPRs.  PALcode
+		   has a shadow copy, and may be available from some versions
+		   of the CSERVE PALcall.  If we can get it, then
+
+			unsigned long bc_control, bc_config, size;
+			size = 1024*1024 * (1 << ((bc_config & 7) - 1));
+			L3 = (bc_control & 1 ? CSHAPE (size, width, 1) : -1);
+
+		   Unfortunately, we can't rely on that.
+		*/
+		L3 = external_cache_probe(1024*1024, width);
+		break;
+	  }
+
+	case PCA56_CPU:
+	case PCA57_CPU:
+	  {
+		if (cpu_type == PCA56_CPU) {
+			L1I = CSHAPE(16*1024, 6, 1);
+			L1D = CSHAPE(8*1024, 5, 1);
+		} else {
+			L1I = CSHAPE(32*1024, 6, 2);
+			L1D = CSHAPE(16*1024, 5, 1);
+		}
+		L3 = -1;
+
+#if 0
+		unsigned long cbox_config, size;
+
+		cbox_config = *(vulp) phys_to_virt (0xfffff00008UL);
+		size = 512*1024 * (1 << ((cbox_config >> 12) & 3));
+
+		L2 = ((cbox_config >> 31) & 1 ? CSHAPE (size, 6, 1) : -1);
+#else
+		L2 = external_cache_probe(512*1024, 6);
+#endif
+		break;
+	  }
+
+	case EV6_CPU:
+	case EV67_CPU:
+	case EV68CB_CPU:
+	case EV68AL_CPU:
+	case EV68CX_CPU:
+	case EV69_CPU:
+		L1I = L1D = CSHAPE(64*1024, 6, 2);
+		L2 = external_cache_probe(1024*1024, 6);
+		L3 = -1;
+		break;
+
+	case EV7_CPU:
+	case EV79_CPU:
+		L1I = L1D = CSHAPE(64*1024, 6, 2);
+		L2 = CSHAPE(7*1024*1024/4, 6, 7);
+		L3 = -1;
+		break;
+
+	default:
+		/* Nothing known about this cpu type.  */
+		L1I = L1D = L2 = L3 = 0;
+		break;
+	}
+
+	alpha_l1i_cacheshape = L1I;
+	alpha_l1d_cacheshape = L1D;
+	alpha_l2_cacheshape = L2;
+	alpha_l3_cacheshape = L3;
+}
+
+/*
+ * We show only CPU #0 info.
+ */
+static void *
+c_start(struct seq_file *f, loff_t *pos)
+{
+	return *pos ? NULL : (char *)hwrpb + hwrpb->processor_offset;
+}
+
+static void *
+c_next(struct seq_file *f, void *v, loff_t *pos)
+{
+	(*pos)++;
+	return NULL;
+}
+
+static void
+c_stop(struct seq_file *f, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+
+
+static int
+alpha_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+#if 1
+	/* FIXME FIXME FIXME */
+	/* If we are using SRM and serial console, just hard halt here. */
+	if (alpha_using_srm && srmcons_output)
+		__halt();
+#endif
+        return NOTIFY_DONE;
+}
+
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
new file mode 100644
index 0000000000..e62d1d461b
--- /dev/null
+++ b/arch/alpha/kernel/signal.c
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/signal.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  1997-11-02  Modified for POSIX.1b signals by Richard Henderson
+ */
+
+#include <linux/sched/signal.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/tty.h>
+#include <linux/binfmts.h>
+#include <linux/bitops.h>
+#include <linux/syscalls.h>
+#include <linux/resume_user_mode.h>
+
+#include <linux/uaccess.h>
+#include <asm/sigcontext.h>
+#include <asm/ucontext.h>
+
+#include "proto.h"
+
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+asmlinkage void ret_from_sys_call(void);
+
+/*
+ * The OSF/1 sigprocmask calling sequence is different from the
+ * C sigprocmask() sequence..
+ */
+SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
+{
+	sigset_t oldmask;
+	sigset_t mask;
+	unsigned long res;
+
+	siginitset(&mask, newmask & _BLOCKABLE);
+	res = sigprocmask(how, &mask, &oldmask);
+	if (!res) {
+		force_successful_syscall_return();
+		res = oldmask.sig[0];
+	}
+	return res;
+}
+
+SYSCALL_DEFINE3(osf_sigaction, int, sig,
+		const struct osf_sigaction __user *, act,
+		struct osf_sigaction __user *, oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+
+	if (act) {
+		old_sigset_t mask;
+		if (!access_ok(act, sizeof(*act)) ||
+		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+		    __get_user(mask, &act->sa_mask))
+			return -EFAULT;
+		siginitset(&new_ka.sa.sa_mask, mask);
+		new_ka.ka_restorer = NULL;
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(oact, sizeof(*oact)) ||
+		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
+			return -EFAULT;
+	}
+
+	return ret;
+}
+
+SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
+		struct sigaction __user *, oact,
+		size_t, sigsetsize, void __user *, restorer)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+
+	/* XXX: Don't preclude handling different sized sigset_t's.  */
+	if (sigsetsize != sizeof(sigset_t))
+		return -EINVAL;
+
+	if (act) {
+		new_ka.ka_restorer = restorer;
+		if (copy_from_user(&new_ka.sa, act, sizeof(*act)))
+			return -EFAULT;
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (copy_to_user(oact, &old_ka.sa, sizeof(*oact)))
+			return -EFAULT;
+	}
+
+	return ret;
+}
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+#if _NSIG_WORDS > 1
+# error "Non SA_SIGINFO frame needs rearranging"
+#endif
+
+struct sigframe
+{
+	struct sigcontext sc;
+	unsigned int retcode[3];
+};
+
+struct rt_sigframe
+{
+	struct siginfo info;
+	struct ucontext uc;
+	unsigned int retcode[3];
+};
+
+/* If this changes, userland unwinders that Know Things about our signal
+   frame will break.  Do not undertake lightly.  It also implies an ABI
+   change wrt the size of siginfo_t, which may cause some pain.  */
+extern char compile_time_assert
+        [offsetof(struct rt_sigframe, uc.uc_mcontext) == 176 ? 1 : -1];
+
+#define INSN_MOV_R30_R16	0x47fe0410
+#define INSN_LDI_R0		0x201f0000
+#define INSN_CALLSYS		0x00000083
+
+static long
+restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
+{
+	unsigned long usp;
+	struct switch_stack *sw = (struct switch_stack *)regs - 1;
+	long err = __get_user(regs->pc, &sc->sc_pc);
+
+	current->restart_block.fn = do_no_restart_syscall;
+	current_thread_info()->status |= TS_SAVED_FP | TS_RESTORE_FP;
+
+	sw->r26 = (unsigned long) ret_from_sys_call;
+
+	err |= __get_user(regs->r0, sc->sc_regs+0);
+	err |= __get_user(regs->r1, sc->sc_regs+1);
+	err |= __get_user(regs->r2, sc->sc_regs+2);
+	err |= __get_user(regs->r3, sc->sc_regs+3);
+	err |= __get_user(regs->r4, sc->sc_regs+4);
+	err |= __get_user(regs->r5, sc->sc_regs+5);
+	err |= __get_user(regs->r6, sc->sc_regs+6);
+	err |= __get_user(regs->r7, sc->sc_regs+7);
+	err |= __get_user(regs->r8, sc->sc_regs+8);
+	err |= __get_user(sw->r9, sc->sc_regs+9);
+	err |= __get_user(sw->r10, sc->sc_regs+10);
+	err |= __get_user(sw->r11, sc->sc_regs+11);
+	err |= __get_user(sw->r12, sc->sc_regs+12);
+	err |= __get_user(sw->r13, sc->sc_regs+13);
+	err |= __get_user(sw->r14, sc->sc_regs+14);
+	err |= __get_user(sw->r15, sc->sc_regs+15);
+	err |= __get_user(regs->r16, sc->sc_regs+16);
+	err |= __get_user(regs->r17, sc->sc_regs+17);
+	err |= __get_user(regs->r18, sc->sc_regs+18);
+	err |= __get_user(regs->r19, sc->sc_regs+19);
+	err |= __get_user(regs->r20, sc->sc_regs+20);
+	err |= __get_user(regs->r21, sc->sc_regs+21);
+	err |= __get_user(regs->r22, sc->sc_regs+22);
+	err |= __get_user(regs->r23, sc->sc_regs+23);
+	err |= __get_user(regs->r24, sc->sc_regs+24);
+	err |= __get_user(regs->r25, sc->sc_regs+25);
+	err |= __get_user(regs->r26, sc->sc_regs+26);
+	err |= __get_user(regs->r27, sc->sc_regs+27);
+	err |= __get_user(regs->r28, sc->sc_regs+28);
+	err |= __get_user(regs->gp, sc->sc_regs+29);
+	err |= __get_user(usp, sc->sc_regs+30);
+	wrusp(usp);
+
+	err |= __copy_from_user(current_thread_info()->fp,
+				sc->sc_fpregs, 31 * 8);
+	err |= __get_user(current_thread_info()->fp[31], &sc->sc_fpcr);
+
+	return err;
+}
+
+/* Note that this syscall is also used by setcontext(3) to install
+   a given sigcontext.  This because it's impossible to set *all*
+   registers and transfer control from userland.  */
+
+asmlinkage void
+do_sigreturn(struct sigcontext __user *sc)
+{
+	struct pt_regs *regs = current_pt_regs();
+	sigset_t set;
+
+	/* Verify that it's a good sigcontext before using it */
+	if (!access_ok(sc, sizeof(*sc)))
+		goto give_sigsegv;
+	if (__get_user(set.sig[0], &sc->sc_mask))
+		goto give_sigsegv;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(sc, regs))
+		goto give_sigsegv;
+
+	/* Send SIGTRAP if we're single-stepping: */
+	if (ptrace_cancel_bpt (current)) {
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc,
+			       current);
+	}
+	return;
+
+give_sigsegv:
+	force_sig(SIGSEGV);
+}
+
+asmlinkage void
+do_rt_sigreturn(struct rt_sigframe __user *frame)
+{
+	struct pt_regs *regs = current_pt_regs();
+	sigset_t set;
+
+	/* Verify that it's a good ucontext_t before using it */
+	if (!access_ok(&frame->uc, sizeof(frame->uc)))
+		goto give_sigsegv;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto give_sigsegv;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(&frame->uc.uc_mcontext, regs))
+		goto give_sigsegv;
+
+	/* Send SIGTRAP if we're single-stepping: */
+	if (ptrace_cancel_bpt (current)) {
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc,
+			       current);
+	}
+	return;
+
+give_sigsegv:
+	force_sig(SIGSEGV);
+}
+
+
+/*
+ * Set up a signal frame.
+ */
+
+static inline void __user *
+get_sigframe(struct ksignal *ksig, unsigned long sp, size_t frame_size)
+{
+	return (void __user *)((sigsp(sp, ksig) - frame_size) & -32ul);
+}
+
+static long
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, 
+		 unsigned long mask, unsigned long sp)
+{
+	struct switch_stack *sw = (struct switch_stack *)regs - 1;
+	long err = 0;
+
+	err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack);
+	err |= __put_user(mask, &sc->sc_mask);
+	err |= __put_user(regs->pc, &sc->sc_pc);
+	err |= __put_user(8, &sc->sc_ps);
+
+	err |= __put_user(regs->r0 , sc->sc_regs+0);
+	err |= __put_user(regs->r1 , sc->sc_regs+1);
+	err |= __put_user(regs->r2 , sc->sc_regs+2);
+	err |= __put_user(regs->r3 , sc->sc_regs+3);
+	err |= __put_user(regs->r4 , sc->sc_regs+4);
+	err |= __put_user(regs->r5 , sc->sc_regs+5);
+	err |= __put_user(regs->r6 , sc->sc_regs+6);
+	err |= __put_user(regs->r7 , sc->sc_regs+7);
+	err |= __put_user(regs->r8 , sc->sc_regs+8);
+	err |= __put_user(sw->r9   , sc->sc_regs+9);
+	err |= __put_user(sw->r10  , sc->sc_regs+10);
+	err |= __put_user(sw->r11  , sc->sc_regs+11);
+	err |= __put_user(sw->r12  , sc->sc_regs+12);
+	err |= __put_user(sw->r13  , sc->sc_regs+13);
+	err |= __put_user(sw->r14  , sc->sc_regs+14);
+	err |= __put_user(sw->r15  , sc->sc_regs+15);
+	err |= __put_user(regs->r16, sc->sc_regs+16);
+	err |= __put_user(regs->r17, sc->sc_regs+17);
+	err |= __put_user(regs->r18, sc->sc_regs+18);
+	err |= __put_user(regs->r19, sc->sc_regs+19);
+	err |= __put_user(regs->r20, sc->sc_regs+20);
+	err |= __put_user(regs->r21, sc->sc_regs+21);
+	err |= __put_user(regs->r22, sc->sc_regs+22);
+	err |= __put_user(regs->r23, sc->sc_regs+23);
+	err |= __put_user(regs->r24, sc->sc_regs+24);
+	err |= __put_user(regs->r25, sc->sc_regs+25);
+	err |= __put_user(regs->r26, sc->sc_regs+26);
+	err |= __put_user(regs->r27, sc->sc_regs+27);
+	err |= __put_user(regs->r28, sc->sc_regs+28);
+	err |= __put_user(regs->gp , sc->sc_regs+29);
+	err |= __put_user(sp, sc->sc_regs+30);
+	err |= __put_user(0, sc->sc_regs+31);
+
+	err |= __copy_to_user(sc->sc_fpregs,
+			      current_thread_info()->fp, 31 * 8);
+	err |= __put_user(0, sc->sc_fpregs+31);
+	err |= __put_user(current_thread_info()->fp[31], &sc->sc_fpcr);
+
+	err |= __put_user(regs->trap_a0, &sc->sc_traparg_a0);
+	err |= __put_user(regs->trap_a1, &sc->sc_traparg_a1);
+	err |= __put_user(regs->trap_a2, &sc->sc_traparg_a2);
+
+	return err;
+}
+
+static int
+setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
+{
+	unsigned long oldsp, r26, err = 0;
+	struct sigframe __user *frame;
+
+	oldsp = rdusp();
+	frame = get_sigframe(ksig, oldsp, sizeof(*frame));
+	if (!access_ok(frame, sizeof(*frame)))
+		return -EFAULT;
+
+	err |= setup_sigcontext(&frame->sc, regs, set->sig[0], oldsp);
+	if (err)
+		return -EFAULT;
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	r26 = (unsigned long) ksig->ka.ka_restorer;
+	if (!r26) {
+		err |= __put_user(INSN_MOV_R30_R16, frame->retcode+0);
+		err |= __put_user(INSN_LDI_R0+__NR_sigreturn, frame->retcode+1);
+		err |= __put_user(INSN_CALLSYS, frame->retcode+2);
+		imb();
+		r26 = (unsigned long) frame->retcode;
+	}
+
+	/* Check that everything was written properly.  */
+	if (err)
+		return err;
+
+	/* "Return" to the handler */
+	regs->r26 = r26;
+	regs->r27 = regs->pc = (unsigned long) ksig->ka.sa.sa_handler;
+	regs->r16 = ksig->sig;			/* a0: signal number */
+	regs->r17 = 0;				/* a1: exception code */
+	regs->r18 = (unsigned long) &frame->sc;	/* a2: sigcontext pointer */
+	wrusp((unsigned long) frame);
+	
+#if DEBUG_SIG
+	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+		current->comm, current->pid, frame, regs->pc, regs->r26);
+#endif
+	return 0;
+}
+
+static int
+setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
+{
+	unsigned long oldsp, r26, err = 0;
+	struct rt_sigframe __user *frame;
+
+	oldsp = rdusp();
+	frame = get_sigframe(ksig, oldsp, sizeof(*frame));
+	if (!access_ok(frame, sizeof(*frame)))
+		return -EFAULT;
+
+	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+	/* Create the ucontext.  */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __put_user(set->sig[0], &frame->uc.uc_osf_sigmask);
+	err |= __save_altstack(&frame->uc.uc_stack, oldsp);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, 
+				set->sig[0], oldsp);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+	if (err)
+		return -EFAULT;
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	r26 = (unsigned long) ksig->ka.ka_restorer;
+	if (!r26) {
+		err |= __put_user(INSN_MOV_R30_R16, frame->retcode+0);
+		err |= __put_user(INSN_LDI_R0+__NR_rt_sigreturn,
+				  frame->retcode+1);
+		err |= __put_user(INSN_CALLSYS, frame->retcode+2);
+		imb();
+		r26 = (unsigned long) frame->retcode;
+	}
+
+	if (err)
+		return -EFAULT;
+
+	/* "Return" to the handler */
+	regs->r26 = r26;
+	regs->r27 = regs->pc = (unsigned long) ksig->ka.sa.sa_handler;
+	regs->r16 = ksig->sig;			  /* a0: signal number */
+	regs->r17 = (unsigned long) &frame->info; /* a1: siginfo pointer */
+	regs->r18 = (unsigned long) &frame->uc;	  /* a2: ucontext pointer */
+	wrusp((unsigned long) frame);
+
+#if DEBUG_SIG
+	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+		current->comm, current->pid, frame, regs->pc, regs->r26);
+#endif
+
+	return 0;
+}
+
+
+/*
+ * OK, we're invoking a handler.
+ */
+static inline void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int ret;
+
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+		ret = setup_rt_frame(ksig, oldset, regs);
+	else
+		ret = setup_frame(ksig, oldset, regs);
+
+	signal_setup_done(ret, ksig, 0);
+}
+
+static inline void
+syscall_restart(unsigned long r0, unsigned long r19,
+		struct pt_regs *regs, struct k_sigaction *ka)
+{
+	switch (regs->r0) {
+	case ERESTARTSYS:
+		if (!(ka->sa.sa_flags & SA_RESTART)) {
+		case ERESTARTNOHAND:
+			regs->r0 = EINTR;
+			break;
+		}
+		fallthrough;
+	case ERESTARTNOINTR:
+		regs->r0 = r0;	/* reset v0 and a3 and replay syscall */
+		regs->r19 = r19;
+		regs->pc -= 4;
+		break;
+	case ERESTART_RESTARTBLOCK:
+		regs->r0 = EINTR;
+		break;
+	}
+}
+
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ *
+ * "r0" and "r19" are the registers we need to restore for system call
+ * restart. "r0" is also used as an indicator whether we can restart at
+ * all (if we get here from anything but a syscall return, it will be 0)
+ */
+static void
+do_signal(struct pt_regs *regs, unsigned long r0, unsigned long r19)
+{
+	unsigned long single_stepping = ptrace_cancel_bpt(current);
+	struct ksignal ksig;
+
+	/* This lets the debugger run, ... */
+	if (get_signal(&ksig)) {
+		/* ... so re-check the single stepping. */
+		single_stepping |= ptrace_cancel_bpt(current);
+		/* Whee!  Actually deliver the signal.  */
+		if (r0)
+			syscall_restart(r0, r19, regs, &ksig.ka);
+		handle_signal(&ksig, regs);
+	} else {
+		single_stepping |= ptrace_cancel_bpt(current);
+		if (r0) {
+			switch (regs->r0) {
+			case ERESTARTNOHAND:
+			case ERESTARTSYS:
+			case ERESTARTNOINTR:
+				/* Reset v0 and a3 and replay syscall.  */
+				regs->r0 = r0;
+				regs->r19 = r19;
+				regs->pc -= 4;
+				break;
+			case ERESTART_RESTARTBLOCK:
+				/* Set v0 to the restart_syscall and replay */
+				regs->r0 = __NR_restart_syscall;
+				regs->pc -= 4;
+				break;
+			}
+		}
+		restore_saved_sigmask();
+	}
+	if (single_stepping)
+		ptrace_set_bpt(current);	/* re-set breakpoint */
+}
+
+void
+do_work_pending(struct pt_regs *regs, unsigned long thread_flags,
+		 unsigned long r0, unsigned long r19)
+{
+	do {
+		if (thread_flags & _TIF_NEED_RESCHED) {
+			schedule();
+		} else {
+			local_irq_enable();
+			if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
+				preempt_disable();
+				save_fpu();
+				preempt_enable();
+				do_signal(regs, r0, r19);
+				r0 = 0;
+			} else {
+				resume_user_mode_work(regs);
+			}
+		}
+		local_irq_disable();
+		thread_flags = read_thread_flags();
+	} while (thread_flags & _TIF_WORK_MASK);
+}
diff --git a/arch/alpha/kernel/smc37c669.c b/arch/alpha/kernel/smc37c669.c
new file mode 100644
index 0000000000..bbbd34586d
--- /dev/null
+++ b/arch/alpha/kernel/smc37c669.c
@@ -0,0 +1,2537 @@
+/*
+ * SMC 37C669 initialization code
+ */
+#include <linux/kernel.h>
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#include <asm/hwrpb.h>
+#include <asm/io.h>
+
+#if 0
+# define DBG_DEVS(args)         printk args
+#else
+# define DBG_DEVS(args)
+#endif
+
+#define KB              1024
+#define MB              (1024*KB)
+#define GB              (1024*MB)
+
+#define SMC_DEBUG   0
+
+/* File:	smcc669_def.h
+ *
+ * Copyright (C) 1997 by
+ * Digital Equipment Corporation, Maynard, Massachusetts.
+ * All rights reserved.
+ *
+ * This software is furnished under a license and may be used and copied
+ * only  in  accordance  of  the  terms  of  such  license  and with the
+ * inclusion of the above copyright notice. This software or  any  other
+ * copies thereof may not be provided or otherwise made available to any
+ * other person.  No title to and  ownership of the  software is  hereby
+ * transferred.
+ *
+ * The information in this software is  subject to change without notice
+ * and  should  not  be  construed  as a commitment by Digital Equipment
+ * Corporation.
+ *
+ * Digital assumes no responsibility for the use  or  reliability of its
+ * software on equipment which is not supplied by Digital.
+ *
+ *
+ * Abstract:	
+ *
+ *	This file contains header definitions for the SMC37c669 
+ *	Super I/O controller. 
+ *
+ * Author:	
+ *
+ *	Eric Rasmussen
+ *
+ * Modification History:
+ *
+ *	er	28-Jan-1997	Initial Entry
+ */
+
+#ifndef __SMC37c669_H
+#define __SMC37c669_H
+
+/*
+** Macros for handling device IRQs
+**
+** The mask acts as a flag used in mapping actual ISA IRQs (0 - 15) 
+** to device IRQs (A - H).
+*/
+#define SMC37c669_DEVICE_IRQ_MASK	0x80000000
+#define SMC37c669_DEVICE_IRQ( __i )	\
+	((SMC37c669_DEVICE_IRQ_MASK) | (__i))
+#define SMC37c669_IS_DEVICE_IRQ(__i)	\
+	(((__i) & (SMC37c669_DEVICE_IRQ_MASK)) == (SMC37c669_DEVICE_IRQ_MASK))
+#define SMC37c669_RAW_DEVICE_IRQ(__i)	\
+	((__i) & ~(SMC37c669_DEVICE_IRQ_MASK))
+
+/*
+** Macros for handling device DRQs
+**
+** The mask acts as a flag used in mapping actual ISA DMA
+** channels to device DMA channels (A - C).
+*/
+#define SMC37c669_DEVICE_DRQ_MASK	0x80000000
+#define SMC37c669_DEVICE_DRQ(__d)	\
+	((SMC37c669_DEVICE_DRQ_MASK) | (__d))
+#define SMC37c669_IS_DEVICE_DRQ(__d)	\
+	(((__d) & (SMC37c669_DEVICE_DRQ_MASK)) == (SMC37c669_DEVICE_DRQ_MASK))
+#define SMC37c669_RAW_DEVICE_DRQ(__d)	\
+	((__d) & ~(SMC37c669_DEVICE_DRQ_MASK))
+
+#define SMC37c669_DEVICE_ID	0x3
+
+/*
+** SMC37c669 Device Function Definitions
+*/
+#define SERIAL_0	0
+#define SERIAL_1	1
+#define PARALLEL_0	2
+#define FLOPPY_0	3
+#define IDE_0		4
+#define NUM_FUNCS	5
+
+/*
+** Default Device Function Mappings
+*/
+#define COM1_BASE	0x3F8
+#define COM1_IRQ	4
+#define COM2_BASE	0x2F8
+#define COM2_IRQ	3
+#define PARP_BASE	0x3BC
+#define PARP_IRQ	7
+#define PARP_DRQ	3
+#define FDC_BASE	0x3F0
+#define FDC_IRQ		6
+#define FDC_DRQ		2
+
+/*
+** Configuration On/Off Key Definitions
+*/
+#define SMC37c669_CONFIG_ON_KEY		0x55
+#define SMC37c669_CONFIG_OFF_KEY	0xAA
+
+/*
+** SMC 37c669 Device IRQs
+*/
+#define SMC37c669_DEVICE_IRQ_A	    ( SMC37c669_DEVICE_IRQ( 0x01 ) )
+#define SMC37c669_DEVICE_IRQ_B	    ( SMC37c669_DEVICE_IRQ( 0x02 ) )
+#define SMC37c669_DEVICE_IRQ_C	    ( SMC37c669_DEVICE_IRQ( 0x03 ) )
+#define SMC37c669_DEVICE_IRQ_D	    ( SMC37c669_DEVICE_IRQ( 0x04 ) )
+#define SMC37c669_DEVICE_IRQ_E	    ( SMC37c669_DEVICE_IRQ( 0x05 ) )
+#define SMC37c669_DEVICE_IRQ_F	    ( SMC37c669_DEVICE_IRQ( 0x06 ) )
+/*      SMC37c669_DEVICE_IRQ_G	    *** RESERVED ***/
+#define SMC37c669_DEVICE_IRQ_H	    ( SMC37c669_DEVICE_IRQ( 0x08 ) )
+
+/*
+** SMC 37c669 Device DMA Channel Definitions
+*/
+#define SMC37c669_DEVICE_DRQ_A		    ( SMC37c669_DEVICE_DRQ( 0x01 ) )
+#define SMC37c669_DEVICE_DRQ_B		    ( SMC37c669_DEVICE_DRQ( 0x02 ) )
+#define SMC37c669_DEVICE_DRQ_C		    ( SMC37c669_DEVICE_DRQ( 0x03 ) )
+
+/*
+** Configuration Register Index Definitions
+*/
+#define SMC37c669_CR00_INDEX	    0x00
+#define SMC37c669_CR01_INDEX	    0x01
+#define SMC37c669_CR02_INDEX	    0x02
+#define SMC37c669_CR03_INDEX	    0x03
+#define SMC37c669_CR04_INDEX	    0x04
+#define SMC37c669_CR05_INDEX	    0x05
+#define SMC37c669_CR06_INDEX	    0x06
+#define SMC37c669_CR07_INDEX	    0x07
+#define SMC37c669_CR08_INDEX	    0x08
+#define SMC37c669_CR09_INDEX	    0x09
+#define SMC37c669_CR0A_INDEX	    0x0A
+#define SMC37c669_CR0B_INDEX	    0x0B
+#define SMC37c669_CR0C_INDEX	    0x0C
+#define SMC37c669_CR0D_INDEX	    0x0D
+#define SMC37c669_CR0E_INDEX	    0x0E
+#define SMC37c669_CR0F_INDEX	    0x0F
+#define SMC37c669_CR10_INDEX	    0x10
+#define SMC37c669_CR11_INDEX	    0x11
+#define SMC37c669_CR12_INDEX	    0x12
+#define SMC37c669_CR13_INDEX	    0x13
+#define SMC37c669_CR14_INDEX	    0x14
+#define SMC37c669_CR15_INDEX	    0x15
+#define SMC37c669_CR16_INDEX	    0x16
+#define SMC37c669_CR17_INDEX	    0x17
+#define SMC37c669_CR18_INDEX	    0x18
+#define SMC37c669_CR19_INDEX	    0x19
+#define SMC37c669_CR1A_INDEX	    0x1A
+#define SMC37c669_CR1B_INDEX	    0x1B
+#define SMC37c669_CR1C_INDEX	    0x1C
+#define SMC37c669_CR1D_INDEX	    0x1D
+#define SMC37c669_CR1E_INDEX	    0x1E
+#define SMC37c669_CR1F_INDEX	    0x1F
+#define SMC37c669_CR20_INDEX	    0x20
+#define SMC37c669_CR21_INDEX	    0x21
+#define SMC37c669_CR22_INDEX	    0x22
+#define SMC37c669_CR23_INDEX	    0x23
+#define SMC37c669_CR24_INDEX	    0x24
+#define SMC37c669_CR25_INDEX	    0x25
+#define SMC37c669_CR26_INDEX	    0x26
+#define SMC37c669_CR27_INDEX	    0x27
+#define SMC37c669_CR28_INDEX	    0x28
+#define SMC37c669_CR29_INDEX	    0x29
+
+/*
+** Configuration Register Alias Definitions
+*/
+#define SMC37c669_DEVICE_ID_INDEX		    SMC37c669_CR0D_INDEX
+#define SMC37c669_DEVICE_REVISION_INDEX		    SMC37c669_CR0E_INDEX
+#define SMC37c669_FDC_BASE_ADDRESS_INDEX	    SMC37c669_CR20_INDEX
+#define SMC37c669_IDE_BASE_ADDRESS_INDEX	    SMC37c669_CR21_INDEX
+#define SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX	    SMC37c669_CR22_INDEX
+#define SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX	    SMC37c669_CR23_INDEX
+#define SMC37c669_SERIAL0_BASE_ADDRESS_INDEX	    SMC37c669_CR24_INDEX
+#define SMC37c669_SERIAL1_BASE_ADDRESS_INDEX	    SMC37c669_CR25_INDEX
+#define SMC37c669_PARALLEL_FDC_DRQ_INDEX	    SMC37c669_CR26_INDEX
+#define SMC37c669_PARALLEL_FDC_IRQ_INDEX	    SMC37c669_CR27_INDEX
+#define SMC37c669_SERIAL_IRQ_INDEX		    SMC37c669_CR28_INDEX
+
+/*
+** Configuration Register Definitions
+**
+** The INDEX (write only) and DATA (read/write) ports are effective 
+** only when the chip is in the Configuration State.
+*/
+typedef struct _SMC37c669_CONFIG_REGS {
+    unsigned char index_port;
+    unsigned char data_port;
+} SMC37c669_CONFIG_REGS;
+
+/*
+** CR00 - default value 0x28
+**
+**  IDE_EN (CR00<1:0>):
+**	0x - 30ua pull-ups on nIDEEN, nHDCS0, NHDCS1
+**	11 - IRQ_H available as IRQ output,
+**	     IRRX2, IRTX2 available as alternate IR pins
+**	10 - nIDEEN, nHDCS0, nHDCS1 used to control IDE
+**
+**  VALID (CR00<7>):
+**	A high level on this software controlled bit can
+**	be used to indicate that a valid configuration
+**	cycle has occurred.  The control software must
+**	take care to set this bit at the appropriate times.
+**	Set to zero after power up.  This bit has no
+**	effect on any other hardware in the chip.
+**
+*/
+typedef union _SMC37c669_CR00 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned ide_en : 2;	    /* See note above		*/
+	unsigned reserved1 : 1;	    /* RAZ			*/
+	unsigned fdc_pwr : 1;	    /* 1 = supply power to FDC  */
+	unsigned reserved2 : 3;	    /* Read as 010b		*/
+	unsigned valid : 1;	    /* See note above		*/
+    }	by_field;
+} SMC37c669_CR00;
+
+/*
+** CR01 - default value 0x9C
+*/
+typedef union _SMC37c669_CR01 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned reserved1 : 2;	    /* RAZ			    */
+	unsigned ppt_pwr : 1;	    /* 1 = supply power to PPT	    */
+	unsigned ppt_mode : 1;	    /* 1 = Printer mode, 0 = EPP    */
+	unsigned reserved2 : 1;	    /* Read as 1		    */
+	unsigned reserved3 : 2;	    /* RAZ			    */
+	unsigned lock_crx: 1;	    /* Lock CR00 - CR18		    */
+    }	by_field;
+} SMC37c669_CR01;
+
+/*
+** CR02 - default value 0x88
+*/
+typedef union _SMC37c669_CR02 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned reserved1 : 3;	    /* RAZ			    */
+	unsigned uart1_pwr : 1;	    /* 1 = supply power to UART1    */
+	unsigned reserved2 : 3;	    /* RAZ			    */
+	unsigned uart2_pwr : 1;	    /* 1 = supply power to UART2    */
+    }	by_field;
+} SMC37c669_CR02;
+
+/*
+** CR03 - default value 0x78
+**
+**  CR03<7>	CR03<2>	    Pin 94
+**  -------	-------	    ------
+**     0	   X	    DRV2 (input)
+**     1	   0	    ADRX
+**     1	   1	    IRQ_B
+**
+**  CR03<6>	CR03<5>	    Op Mode
+**  -------	-------	    -------
+**     0	   0	    Model 30
+**     0	   1	    PS/2
+**     1	   0	    Reserved
+**     1	   1	    AT Mode
+*/
+typedef union _SMC37c669_CR03 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned pwrgd_gamecs : 1;  /* 1 = PWRGD, 0 = GAMECS	    */
+	unsigned fdc_mode2 : 1;	    /* 1 = Enhanced Mode 2	    */
+	unsigned pin94_0 : 1;	    /* See note above		    */
+	unsigned reserved1 : 1;	    /* RAZ			    */
+	unsigned drvden : 1;	    /* 1 = high, 0 - output	    */
+	unsigned op_mode : 2;	    /* See note above		    */
+	unsigned pin94_1 : 1;	    /* See note above		    */
+    }	by_field;
+} SMC37c669_CR03;
+
+/*
+** CR04 - default value 0x00
+**
+**  PP_EXT_MODE:
+**	If CR01<PP_MODE> = 0 and PP_EXT_MODE =
+**	    00 - Standard and Bidirectional
+**	    01 - EPP mode and SPP
+**	    10 - ECP mode
+**		 In this mode, 2 drives can be supported
+**		 directly, 3 or 4 drives must use external
+**		 4 drive support.  SPP can be selected
+**		 through the ECR register of ECP as mode 000.
+**	    11 - ECP mode and EPP mode
+**		 In this mode, 2 drives can be supported
+**		 directly, 3 or 4 drives must use external
+**		 4 drive support.  SPP can be selected
+**		 through the ECR register of ECP as mode 000.
+**		 In this mode, EPP can be selected through
+**		 the ECR register of ECP as mode 100.
+**
+**  PP_FDC:
+**	00 - Normal
+**	01 - PPFD1
+**	10 - PPFD2
+**	11 - Reserved
+**
+**  MIDI1:
+**	Serial Clock Select: 
+**	    A low level on this bit disables MIDI support,
+**	    clock = divide by 13.  A high level on this 
+**	    bit enables MIDI support, clock = divide by 12.
+**
+**	MIDI operates at 31.25 Kbps which can be derived 
+**	from 125 KHz (24 MHz / 12 = 2 MHz, 2 MHz / 16 = 125 KHz)
+**
+**  ALT_IO:
+**	0 - Use pins IRRX, IRTX
+**	1 - Use pins IRRX2, IRTX2
+**
+**	If this bit is set, the IR receive and transmit
+**	functions will not be available on pins 25 and 26
+**	unless CR00<IDE_EN> = 11.
+*/
+typedef union _SMC37c669_CR04 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned ppt_ext_mode : 2;  /* See note above		    */
+	unsigned ppt_fdc : 2;	    /* See note above		    */
+	unsigned midi1 : 1;	    /* See note above		    */
+	unsigned midi2 : 1;	    /* See note above		    */
+	unsigned epp_type : 1;	    /* 0 = EPP 1.9, 1 = EPP 1.7	    */
+	unsigned alt_io : 1;	    /* See note above		    */
+    }	by_field;
+} SMC37c669_CR04;
+
+/*
+** CR05 - default value 0x00
+**
+**  DEN_SEL:
+**	00 - Densel output normal
+**	01 - Reserved
+**	10 - Densel output 1
+**	11 - Densel output 0
+**
+*/
+typedef union _SMC37c669_CR05 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned reserved1 : 2;	    /* RAZ					*/
+	unsigned fdc_dma_mode : 1;  /* 0 = burst, 1 = non-burst			*/
+	unsigned den_sel : 2;	    /* See note above				*/
+	unsigned swap_drv : 1;	    /* Swap the FDC motor selects		*/
+	unsigned extx4 : 1;	    /* 0 = 2 drive, 1 = external 4 drive decode	*/
+	unsigned reserved2 : 1;	    /* RAZ					*/
+    }	by_field;
+} SMC37c669_CR05;
+
+/*
+** CR06 - default value 0xFF
+*/
+typedef union _SMC37c669_CR06 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned floppy_a : 2;	    /* Type of floppy drive A	    */
+	unsigned floppy_b : 2;	    /* Type of floppy drive B	    */
+	unsigned floppy_c : 2;	    /* Type of floppy drive C	    */
+	unsigned floppy_d : 2;	    /* Type of floppy drive D	    */
+    }	by_field;
+} SMC37c669_CR06;
+
+/*
+** CR07 - default value 0x00
+**
+**  Auto Power Management CR07<7:4>:
+**	0 - Auto Powerdown disabled (default)
+**	1 - Auto Powerdown enabled
+**
+**	This bit is reset to the default state by POR or
+**	a hardware reset.
+**
+*/
+typedef union _SMC37c669_CR07 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned floppy_boot : 2;   /* 0 = A:, 1 = B:		    */
+	unsigned reserved1 : 2;	    /* RAZ			    */
+	unsigned ppt_en : 1;	    /* See note above		    */
+	unsigned uart1_en : 1;	    /* See note above		    */
+	unsigned uart2_en : 1;	    /* See note above		    */
+	unsigned fdc_en : 1;	    /* See note above		    */
+    }	by_field;
+} SMC37c669_CR07;
+
+/*
+** CR08 - default value 0x00
+*/
+typedef union _SMC37c669_CR08 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned zero : 4;	    /* 0			    */
+	unsigned addrx7_4 : 4;	    /* ADR<7:3> for ADRx decode	    */
+    }	by_field;
+} SMC37c669_CR08;
+
+/*
+** CR09 - default value 0x00
+**
+**  ADRx_CONFIG:
+**	00 - ADRx disabled
+**	01 - 1 byte decode A<3:0> = 0000b
+**	10 - 8 byte block decode A<3:0> = 0XXXb
+**	11 - 16 byte block decode A<3:0> = XXXXb
+**
+*/
+typedef union _SMC37c669_CR09 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned adra8 : 3;	    /* ADR<10:8> for ADRx decode    */
+	unsigned reserved1 : 3;
+	unsigned adrx_config : 2;   /* See note above		    */
+    }	by_field;
+} SMC37c669_CR09;
+
+/*
+** CR0A - default value 0x00
+*/
+typedef union _SMC37c669_CR0A {
+    unsigned char as_uchar;
+    struct {
+    	unsigned ecp_fifo_threshold : 4;
+	unsigned reserved1 : 4;
+    }	by_field;
+} SMC37c669_CR0A;
+
+/*
+** CR0B - default value 0x00
+*/
+typedef union _SMC37c669_CR0B {
+    unsigned char as_uchar;
+    struct {
+    	unsigned fdd0_drtx : 2;	    /* FDD0 Data Rate Table	    */
+	unsigned fdd1_drtx : 2;	    /* FDD1 Data Rate Table	    */
+	unsigned fdd2_drtx : 2;	    /* FDD2 Data Rate Table	    */
+	unsigned fdd3_drtx : 2;	    /* FDD3 Data Rate Table	    */
+    }	by_field;
+} SMC37c669_CR0B;
+
+/*
+** CR0C - default value 0x00
+**
+**  UART2_MODE:
+**	000 - Standard (default)
+**	001 - IrDA (HPSIR)
+**	010 - Amplitude Shift Keyed IR @500 KHz
+**	011 - Reserved
+**	1xx - Reserved
+**
+*/
+typedef union _SMC37c669_CR0C {
+    unsigned char as_uchar;
+    struct {
+    	unsigned uart2_rcv_polarity : 1;    /* 1 = invert RX		*/
+	unsigned uart2_xmit_polarity : 1;   /* 1 = invert TX		*/
+	unsigned uart2_duplex : 1;	    /* 1 = full, 0 = half	*/
+	unsigned uart2_mode : 3;	    /* See note above		*/
+	unsigned uart1_speed : 1;	    /* 1 = high speed enabled	*/
+	unsigned uart2_speed : 1;	    /* 1 = high speed enabled	*/
+    }	by_field;
+} SMC37c669_CR0C;
+
+/*
+** CR0D - default value 0x03
+**
+**  Device ID Register - read only
+*/
+typedef union _SMC37c669_CR0D {
+    unsigned char as_uchar;
+    struct {
+    	unsigned device_id : 8;	    /* Returns 0x3 in this field    */
+    }	by_field;
+} SMC37c669_CR0D;
+
+/*
+** CR0E - default value 0x02
+**
+**  Device Revision Register - read only
+*/
+typedef union _SMC37c669_CR0E {
+    unsigned char as_uchar;
+    struct {
+    	unsigned device_rev : 8;    /* Returns 0x2 in this field    */
+    }	by_field;
+} SMC37c669_CR0E;
+
+/*
+** CR0F - default value 0x00
+*/
+typedef union _SMC37c669_CR0F {
+    unsigned char as_uchar;
+    struct {
+    	unsigned test0 : 1;	    /* Reserved - set to 0	    */
+	unsigned test1 : 1;	    /* Reserved - set to 0	    */
+	unsigned test2 : 1;	    /* Reserved - set to 0	    */
+	unsigned test3 : 1;	    /* Reserved - set t0 0	    */
+	unsigned test4 : 1;	    /* Reserved - set to 0	    */
+	unsigned test5 : 1;	    /* Reserved - set t0 0	    */
+	unsigned test6 : 1;	    /* Reserved - set t0 0	    */
+	unsigned test7 : 1;	    /* Reserved - set to 0	    */
+    }	by_field;
+} SMC37c669_CR0F;
+
+/*
+** CR10 - default value 0x00
+*/
+typedef union _SMC37c669_CR10 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned reserved1 : 3;	     /* RAZ			    */
+	unsigned pll_gain : 1;	     /* 1 = 3V, 2 = 5V operation    */
+	unsigned pll_stop : 1;	     /* 1 = stop PLLs		    */
+	unsigned ace_stop : 1;	     /* 1 = stop UART clocks	    */
+	unsigned pll_clock_ctrl : 1; /* 0 = 14.318 MHz, 1 = 24 MHz  */
+	unsigned ir_test : 1;	     /* Enable IR test mode	    */
+    }	by_field;
+} SMC37c669_CR10;
+
+/*
+** CR11 - default value 0x00
+*/
+typedef union _SMC37c669_CR11 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned ir_loopback : 1;   /* Internal IR loop back		    */
+	unsigned test_10ms : 1;	    /* Test 10ms autopowerdown FDC timeout  */
+	unsigned reserved1 : 6;	    /* RAZ				    */
+    }	by_field;
+} SMC37c669_CR11;
+
+/*
+** CR12 - CR1D are reserved registers
+*/
+
+/*
+** CR1E - default value 0x80
+**
+**  GAMECS:
+**	00 - GAMECS disabled
+**	01 - 1 byte decode ADR<3:0> = 0001b
+**	10 - 8 byte block decode ADR<3:0> = 0XXXb
+**	11 - 16 byte block decode ADR<3:0> = XXXXb
+**
+*/
+typedef union _SMC37c66_CR1E {
+    unsigned char as_uchar;
+    struct {
+    	unsigned gamecs_config: 2;   /* See note above		    */
+	unsigned gamecs_addr9_4 : 6; /* GAMECS Addr<9:4>	    */
+    }	by_field;
+} SMC37c669_CR1E;
+
+/*
+** CR1F - default value 0x00
+**
+**  DT0 DT1 DRVDEN0 DRVDEN1 Drive Type
+**  --- --- ------- ------- ----------
+**   0   0  DENSEL  DRATE0  4/2/1 MB 3.5"
+**                          2/1 MB 5.25"
+**                          2/1.6/1 MB 3.5" (3-mode)
+**   0   1  DRATE1  DRATE0
+**   1   0  nDENSEL DRATE0  PS/2
+**   1   1  DRATE0  DRATE1
+**
+**  Note: DENSEL, DRATE1, and DRATE0 map onto two output
+**	  pins - DRVDEN0 and DRVDEN1.
+**
+*/
+typedef union _SMC37c669_CR1F {
+    unsigned char as_uchar;
+    struct {
+    	unsigned fdd0_drive_type : 2;	/* FDD0 drive type	    */
+	unsigned fdd1_drive_type : 2;	/* FDD1 drive type	    */
+	unsigned fdd2_drive_type : 2;	/* FDD2 drive type	    */
+	unsigned fdd3_drive_type : 2;	/* FDD3 drive type	    */
+    }	by_field;
+} SMC37c669_CR1F;
+
+/*
+** CR20 - default value 0x3C
+**
+**  FDC Base Address Register
+**	- To disable this decode set Addr<9:8> = 0
+**	- A<10> = 0, A<3:0> = 0XXXb to access.
+**
+*/
+typedef union _SMC37c669_CR20 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned zero : 2;	    /* 0			    */
+	unsigned addr9_4 : 6;	    /* FDC Addr<9:4>		    */
+    }	by_field;
+} SMC37c669_CR20;
+
+/*
+** CR21 - default value 0x3C
+**
+**  IDE Base Address Register
+**	- To disable this decode set Addr<9:8> = 0
+**	- A<10> = 0, A<3:0> = 0XXXb to access.
+**
+*/
+typedef union _SMC37c669_CR21 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned zero : 2;	    /* 0			    */
+	unsigned addr9_4 : 6;	    /* IDE Addr<9:4>		    */
+    }	by_field;
+} SMC37c669_CR21;
+
+/*
+** CR22 - default value 0x3D
+**
+**  IDE Alternate Status Base Address Register
+**	- To disable this decode set Addr<9:8> = 0
+**	- A<10> = 0, A<3:0> = 0110b to access.
+**
+*/
+typedef union _SMC37c669_CR22 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned zero : 2;	    /* 0			    */
+	unsigned addr9_4 : 6;	    /* IDE Alt Status Addr<9:4>	    */
+    }	by_field;
+} SMC37c669_CR22;
+
+/*
+** CR23 - default value 0x00
+**
+**  Parallel Port Base Address Register
+**	- To disable this decode set Addr<9:8> = 0
+**	- A<10> = 0 to access.
+**	- If EPP is enabled, A<2:0> = XXXb to access.
+**	  If EPP is NOT enabled, A<1:0> = XXb to access
+**
+*/
+typedef union _SMC37c669_CR23 {
+    unsigned char as_uchar;
+    struct {
+	unsigned addr9_2 : 8;	    /* Parallel Port Addr<9:2>	    */
+    }	by_field;
+} SMC37c669_CR23;
+
+/*
+** CR24 - default value 0x00
+**
+**  UART1 Base Address Register
+**	- To disable this decode set Addr<9:8> = 0
+**	- A<10> = 0, A<2:0> = XXXb to access.
+**
+*/
+typedef union _SMC37c669_CR24 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned zero : 1;	    /* 0			    */
+	unsigned addr9_3 : 7;	    /* UART1 Addr<9:3>		    */
+    }	by_field;
+} SMC37c669_CR24;
+
+/*
+** CR25 - default value 0x00
+**
+**  UART2 Base Address Register
+**	- To disable this decode set Addr<9:8> = 0
+**	- A<10> = 0, A<2:0> = XXXb to access.
+**
+*/
+typedef union _SMC37c669_CR25 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned zero : 1;	    /* 0			    */
+	unsigned addr9_3 : 7;	    /* UART2 Addr<9:3>		    */
+    }	by_field;
+} SMC37c669_CR25;
+
+/*
+** CR26 - default value 0x00
+**
+**  Parallel Port / FDC DMA Select Register
+**
+**  D3 - D0	  DMA
+**  D7 - D4	Selected
+**  -------	--------
+**   0000	 None
+**   0001	 DMA_A
+**   0010	 DMA_B
+**   0011	 DMA_C
+**
+*/
+typedef union _SMC37c669_CR26 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned ppt_drq : 4;	    /* See note above		    */
+	unsigned fdc_drq : 4;	    /* See note above		    */
+    }	by_field;
+} SMC37c669_CR26;
+
+/*
+** CR27 - default value 0x00
+**
+**  Parallel Port / FDC IRQ Select Register
+**
+**  D3 - D0	  IRQ
+**  D7 - D4	Selected
+**  -------	--------
+**   0000	 None
+**   0001	 IRQ_A
+**   0010	 IRQ_B
+**   0011	 IRQ_C
+**   0100	 IRQ_D
+**   0101	 IRQ_E
+**   0110	 IRQ_F
+**   0111	 Reserved
+**   1000	 IRQ_H
+**
+**  Any unselected IRQ REQ is in tristate
+**
+*/
+typedef union _SMC37c669_CR27 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned ppt_irq : 4;	    /* See note above		    */
+	unsigned fdc_irq : 4;	    /* See note above		    */
+    }	by_field;
+} SMC37c669_CR27;
+
+/*
+** CR28 - default value 0x00
+**
+**  UART IRQ Select Register
+**
+**  D3 - D0	  IRQ
+**  D7 - D4	Selected
+**  -------	--------
+**   0000	 None
+**   0001	 IRQ_A
+**   0010	 IRQ_B
+**   0011	 IRQ_C
+**   0100	 IRQ_D
+**   0101	 IRQ_E
+**   0110	 IRQ_F
+**   0111	 Reserved
+**   1000	 IRQ_H
+**   1111	 share with UART1 (only for UART2)
+**
+**  Any unselected IRQ REQ is in tristate
+**
+**  To share an IRQ between UART1 and UART2, set
+**  UART1 to use the desired IRQ and set UART2 to
+**  0xF to enable sharing mechanism.
+**
+*/
+typedef union _SMC37c669_CR28 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned uart2_irq : 4;	    /* See note above		    */
+	unsigned uart1_irq : 4;	    /* See note above		    */
+    }	by_field;
+} SMC37c669_CR28;
+
+/*
+** CR29 - default value 0x00
+**
+**  IRQIN IRQ Select Register
+**
+**  D3 - D0	  IRQ
+**  D7 - D4	Selected
+**  -------	--------
+**   0000	 None
+**   0001	 IRQ_A
+**   0010	 IRQ_B
+**   0011	 IRQ_C
+**   0100	 IRQ_D
+**   0101	 IRQ_E
+**   0110	 IRQ_F
+**   0111	 Reserved
+**   1000	 IRQ_H
+**
+**  Any unselected IRQ REQ is in tristate
+**
+*/
+typedef union _SMC37c669_CR29 {
+    unsigned char as_uchar;
+    struct {
+    	unsigned irqin_irq : 4;	    /* See note above		    */
+	unsigned reserved1 : 4;	    /* RAZ			    */
+    }	by_field;
+} SMC37c669_CR29;
+
+/*
+** Aliases of Configuration Register formats (should match
+** the set of index aliases).
+**
+** Note that CR24 and CR25 have the same format and are the
+** base address registers for UART1 and UART2.  Because of
+** this we only define 1 alias here - for CR24 - as the serial
+** base address register.
+**
+** Note that CR21 and CR22 have the same format and are the
+** base address and alternate status address registers for
+** the IDE controller.  Because of this we only define 1 alias
+** here - for CR21 - as the IDE address register.
+**
+*/
+typedef SMC37c669_CR0D SMC37c669_DEVICE_ID_REGISTER;
+typedef SMC37c669_CR0E SMC37c669_DEVICE_REVISION_REGISTER;
+typedef SMC37c669_CR20 SMC37c669_FDC_BASE_ADDRESS_REGISTER;
+typedef SMC37c669_CR21 SMC37c669_IDE_ADDRESS_REGISTER;
+typedef SMC37c669_CR23 SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER;
+typedef SMC37c669_CR24 SMC37c669_SERIAL_BASE_ADDRESS_REGISTER;
+typedef SMC37c669_CR26 SMC37c669_PARALLEL_FDC_DRQ_REGISTER;
+typedef SMC37c669_CR27 SMC37c669_PARALLEL_FDC_IRQ_REGISTER;
+typedef SMC37c669_CR28 SMC37c669_SERIAL_IRQ_REGISTER;
+
+/*
+** ISA/Device IRQ Translation Table Entry Definition
+*/
+typedef struct _SMC37c669_IRQ_TRANSLATION_ENTRY {
+    int device_irq;
+    int isa_irq;
+} SMC37c669_IRQ_TRANSLATION_ENTRY;
+
+/*
+** ISA/Device DMA Translation Table Entry Definition
+*/
+typedef struct _SMC37c669_DRQ_TRANSLATION_ENTRY {
+    int device_drq;
+    int isa_drq;
+} SMC37c669_DRQ_TRANSLATION_ENTRY;
+
+/*
+** External Interface Function Prototype Declarations
+*/
+
+SMC37c669_CONFIG_REGS *SMC37c669_detect( 
+    int
+);
+
+unsigned int SMC37c669_enable_device( 
+    unsigned int func 
+);
+
+unsigned int SMC37c669_disable_device( 
+    unsigned int func 
+);
+
+unsigned int SMC37c669_configure_device( 
+    unsigned int func, 
+    int port, 
+    int irq, 
+    int drq 
+);
+
+void SMC37c669_display_device_info( 
+    void 
+);
+
+#endif	/* __SMC37c669_H */
+
+/* file:	smcc669.c
+ *
+ * Copyright (C) 1997 by
+ * Digital Equipment Corporation, Maynard, Massachusetts.
+ * All rights reserved.
+ *
+ * This software is furnished under a license and may be used and copied
+ * only  in  accordance  of  the  terms  of  such  license  and with the
+ * inclusion of the above copyright notice. This software or  any  other
+ * copies thereof may not be provided or otherwise made available to any
+ * other person.  No title to and  ownership of the  software is  hereby
+ * transferred.
+ *
+ * The information in this software is  subject to change without notice
+ * and  should  not  be  construed  as a commitment by digital equipment
+ * corporation.
+ *
+ * Digital assumes no responsibility for the use  or  reliability of its
+ * software on equipment which is not supplied by digital.
+ */
+
+/*
+ *++
+ *  FACILITY:
+ *
+ *      Alpha SRM Console Firmware
+ *
+ *  MODULE DESCRIPTION:
+ *
+ *	SMC37c669 Super I/O controller configuration routines.
+ *
+ *  AUTHORS:
+ *
+ *	Eric Rasmussen
+ *
+ *  CREATION DATE:
+ *  
+ *	28-Jan-1997
+ *
+ *  MODIFICATION HISTORY:
+ *	
+ *	er	01-May-1997	Fixed pointer conversion errors in 
+ *				SMC37c669_get_device_config().
+ *      er	28-Jan-1997	Initial version.
+ *
+ *--
+ */
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define wb( _x_, _y_ )	outb( _y_, (unsigned int)((unsigned long)_x_) )
+#define rb( _x_ )	inb( (unsigned int)((unsigned long)_x_) )
+
+/*
+** Local storage for device configuration information.
+**
+** Since the SMC37c669 does not provide an explicit
+** mechanism for enabling/disabling individual device 
+** functions, other than unmapping the device, local 
+** storage for device configuration information is 
+** allocated here for use in implementing our own 
+** function enable/disable scheme.
+*/
+static struct DEVICE_CONFIG {
+    unsigned int port1;
+    unsigned int port2;
+    int irq;
+    int drq;
+} local_config [NUM_FUNCS];
+
+/*
+** List of all possible addresses for the Super I/O chip
+*/
+static unsigned long SMC37c669_Addresses[] __initdata =
+    {
+	0x3F0UL,	    /* Primary address	    */
+	0x370UL,	    /* Secondary address    */
+	0UL		    /* End of list	    */
+    };
+
+/*
+** Global Pointer to the Super I/O device
+*/
+static SMC37c669_CONFIG_REGS *SMC37c669 __initdata = NULL;
+
+/*
+** IRQ Translation Table
+**
+** The IRQ translation table is a list of SMC37c669 device 
+** and standard ISA IRQs.
+**
+*/
+static SMC37c669_IRQ_TRANSLATION_ENTRY *SMC37c669_irq_table __initdata; 
+
+/*
+** The following definition is for the default IRQ 
+** translation table.
+*/
+static SMC37c669_IRQ_TRANSLATION_ENTRY SMC37c669_default_irq_table[]
+__initdata = 
+    { 
+	{ SMC37c669_DEVICE_IRQ_A, -1 }, 
+	{ SMC37c669_DEVICE_IRQ_B, -1 }, 
+	{ SMC37c669_DEVICE_IRQ_C, 7 }, 
+	{ SMC37c669_DEVICE_IRQ_D, 6 }, 
+	{ SMC37c669_DEVICE_IRQ_E, 4 }, 
+	{ SMC37c669_DEVICE_IRQ_F, 3 }, 
+	{ SMC37c669_DEVICE_IRQ_H, -1 }, 
+	{ -1, -1 } /* End of table */
+    };
+
+/*
+** The following definition is for the MONET (XP1000) IRQ 
+** translation table.
+*/
+static SMC37c669_IRQ_TRANSLATION_ENTRY SMC37c669_monet_irq_table[]
+__initdata = 
+    { 
+	{ SMC37c669_DEVICE_IRQ_A, -1 }, 
+	{ SMC37c669_DEVICE_IRQ_B, -1 }, 
+	{ SMC37c669_DEVICE_IRQ_C, 6 }, 
+	{ SMC37c669_DEVICE_IRQ_D, 7 }, 
+	{ SMC37c669_DEVICE_IRQ_E, 4 }, 
+	{ SMC37c669_DEVICE_IRQ_F, 3 }, 
+	{ SMC37c669_DEVICE_IRQ_H, -1 }, 
+	{ -1, -1 } /* End of table */
+    };
+
+static SMC37c669_IRQ_TRANSLATION_ENTRY *SMC37c669_irq_tables[] __initdata =
+    {
+	SMC37c669_default_irq_table,
+	SMC37c669_monet_irq_table
+    }; 
+
+/*
+** DRQ Translation Table
+**
+** The DRQ translation table is a list of SMC37c669 device and
+** ISA DMA channels.
+**
+*/
+static SMC37c669_DRQ_TRANSLATION_ENTRY *SMC37c669_drq_table __initdata;
+
+/*
+** The following definition is the default DRQ
+** translation table.
+*/
+static SMC37c669_DRQ_TRANSLATION_ENTRY SMC37c669_default_drq_table[]
+__initdata = 
+    { 
+	{ SMC37c669_DEVICE_DRQ_A, 2 }, 
+	{ SMC37c669_DEVICE_DRQ_B, 3 }, 
+	{ SMC37c669_DEVICE_DRQ_C, -1 }, 
+	{ -1, -1 } /* End of table */
+    };
+
+/*
+** Local Function Prototype Declarations
+*/
+
+static unsigned int SMC37c669_is_device_enabled( 
+    unsigned int func 
+);
+
+#if 0
+static unsigned int SMC37c669_get_device_config( 
+    unsigned int func, 
+    int *port, 
+    int *irq, 
+    int *drq 
+);
+#endif
+
+static void SMC37c669_config_mode( 
+    unsigned int enable 
+);
+
+static unsigned char SMC37c669_read_config( 
+    unsigned char index 
+);
+
+static void SMC37c669_write_config( 
+    unsigned char index, 
+    unsigned char data 
+);
+
+static void SMC37c669_init_local_config( void );
+
+static struct DEVICE_CONFIG *SMC37c669_get_config(
+    unsigned int func
+);
+
+static int SMC37c669_xlate_irq(
+    int irq 
+);
+
+static int SMC37c669_xlate_drq(
+    int drq 
+);
+
+static  __cacheline_aligned DEFINE_SPINLOCK(smc_lock);
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function detects the presence of an SMC37c669 Super I/O
+**	controller.
+**
+**  FORMAL PARAMETERS:
+**
+**	None
+**
+**  RETURN VALUE:
+**
+**      Returns a pointer to the device if found, otherwise,
+**	the NULL pointer is returned.
+**
+**  SIDE EFFECTS:
+**
+**      None
+**
+**--
+*/
+SMC37c669_CONFIG_REGS * __init SMC37c669_detect( int index )
+{
+    int i;
+    SMC37c669_DEVICE_ID_REGISTER id;
+
+    for ( i = 0;  SMC37c669_Addresses[i] != 0;  i++ ) {
+/*
+** Initialize the device pointer even though we don't yet know if
+** the controller is at this address.  The support functions access
+** the controller through this device pointer so we need to set it
+** even when we are looking ...
+*/
+    	SMC37c669 = ( SMC37c669_CONFIG_REGS * )SMC37c669_Addresses[i];
+/*
+** Enter configuration mode
+*/
+	SMC37c669_config_mode( TRUE );
+/*
+** Read the device id
+*/
+	id.as_uchar = SMC37c669_read_config( SMC37c669_DEVICE_ID_INDEX );
+/*
+** Exit configuration mode
+*/
+	SMC37c669_config_mode( FALSE );
+/*
+** Does the device id match?  If so, assume we have found an
+** SMC37c669 controller at this address.
+*/
+	if ( id.by_field.device_id == SMC37c669_DEVICE_ID ) {
+/*
+** Initialize the IRQ and DRQ translation tables.
+*/
+    	    SMC37c669_irq_table = SMC37c669_irq_tables[ index ];
+	    SMC37c669_drq_table = SMC37c669_default_drq_table;
+/*
+** erfix
+**
+** If the platform can't use the IRQ and DRQ defaults set up in this 
+** file, it should call a platform-specific external routine at this 
+** point to reset the IRQ and DRQ translation table pointers to point 
+** at the appropriate tables for the platform.  If the defaults are 
+** acceptable, then the external routine should do nothing.
+*/
+
+/*
+** Put the chip back into configuration mode
+*/
+	    SMC37c669_config_mode( TRUE );
+/*
+** Initialize local storage for configuration information
+*/
+	    SMC37c669_init_local_config( );
+/*
+** Exit configuration mode
+*/
+	    SMC37c669_config_mode( FALSE );
+/*
+** SMC37c669 controller found, break out of search loop
+*/
+	    break;
+	}
+	else {
+/*
+** Otherwise, we did not find an SMC37c669 controller at this
+** address so set the device pointer to NULL.
+*/
+	    SMC37c669 = NULL;
+	}
+    }
+    return SMC37c669;
+}
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function enables an SMC37c669 device function.
+**
+**  FORMAL PARAMETERS:
+**
+**      func:
+**          Which device function to enable
+**
+**  RETURN VALUE:
+**
+**      Returns TRUE is the device function was enabled, otherwise, FALSE
+**
+**  SIDE EFFECTS:
+**
+**      {@description or none@}
+**
+**  DESIGN:
+**
+**      Enabling a device function in the SMC37c669 controller involves
+**	setting all of its mappings (port, irq, drq ...).  A local 
+**	"shadow" copy of the device configuration is kept so we can
+**	just set each mapping to what the local copy says.
+**
+**	This function ALWAYS updates the local shadow configuration of
+**	the device function being enabled, even if the device is always
+**	enabled.  To avoid replication of code, functions such as
+**	configure_device set up the local copy and then call this 
+**	function to the update the real device.
+**
+**--
+*/
+unsigned int __init SMC37c669_enable_device ( unsigned int func )
+{
+    unsigned int ret_val = FALSE;
+/*
+** Put the device into configuration mode
+*/
+    SMC37c669_config_mode( TRUE );
+    switch ( func ) {
+    	case SERIAL_0:
+	    {
+	    	SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
+		SMC37c669_SERIAL_IRQ_REGISTER irq;
+/*
+** Enable the serial 1 IRQ mapping
+*/
+	    	irq.as_uchar = 
+		    SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+
+		irq.by_field.uart1_irq =
+		    SMC37c669_RAW_DEVICE_IRQ(
+			SMC37c669_xlate_irq( local_config[ func ].irq )
+		    );
+
+		SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
+/*
+** Enable the serial 1 port base address mapping
+*/
+		base_addr.as_uchar = 0;
+		base_addr.by_field.addr9_3 = local_config[ func ].port1 >> 3;
+
+		SMC37c669_write_config( 
+		    SMC37c669_SERIAL0_BASE_ADDRESS_INDEX,
+		    base_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+	case SERIAL_1:
+	    {
+	    	SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
+		SMC37c669_SERIAL_IRQ_REGISTER irq;
+/*
+** Enable the serial 2 IRQ mapping
+*/
+	    	irq.as_uchar = 
+		    SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+
+		irq.by_field.uart2_irq =
+		    SMC37c669_RAW_DEVICE_IRQ(
+			SMC37c669_xlate_irq( local_config[ func ].irq )
+		    );
+
+		SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
+/*
+** Enable the serial 2 port base address mapping
+*/
+		base_addr.as_uchar = 0;
+		base_addr.by_field.addr9_3 = local_config[ func ].port1 >> 3;
+
+		SMC37c669_write_config( 
+		    SMC37c669_SERIAL1_BASE_ADDRESS_INDEX,
+		    base_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+	case PARALLEL_0:
+	    {
+	    	SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER base_addr;
+		SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
+		SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
+/*
+** Enable the parallel port DMA channel mapping
+*/
+	    	drq.as_uchar =
+		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+
+		drq.by_field.ppt_drq = 
+		    SMC37c669_RAW_DEVICE_DRQ(
+			SMC37c669_xlate_drq( local_config[ func ].drq )
+		    );
+
+		SMC37c669_write_config(
+		    SMC37c669_PARALLEL_FDC_DRQ_INDEX,
+		    drq.as_uchar
+		);
+/*
+** Enable the parallel port IRQ mapping
+*/
+		irq.as_uchar = 
+		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+
+		irq.by_field.ppt_irq =
+		    SMC37c669_RAW_DEVICE_IRQ(
+			SMC37c669_xlate_irq( local_config[ func ].irq )
+		    );
+
+		SMC37c669_write_config( 
+		    SMC37c669_PARALLEL_FDC_IRQ_INDEX,
+		    irq.as_uchar
+		);
+/*
+** Enable the parallel port base address mapping
+*/
+		base_addr.as_uchar = 0;
+		base_addr.by_field.addr9_2 = local_config[ func ].port1 >> 2;
+
+		SMC37c669_write_config(
+		    SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX,
+		    base_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+	case FLOPPY_0:
+	    {
+	    	SMC37c669_FDC_BASE_ADDRESS_REGISTER base_addr;
+		SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
+		SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
+/*
+** Enable the floppy controller DMA channel mapping
+*/
+	    	drq.as_uchar =
+		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+		 
+		drq.by_field.fdc_drq =
+		    SMC37c669_RAW_DEVICE_DRQ(
+			SMC37c669_xlate_drq( local_config[ func ].drq )
+		    );
+		 
+		SMC37c669_write_config( 
+		    SMC37c669_PARALLEL_FDC_DRQ_INDEX,
+		    drq.as_uchar
+		);
+/*
+** Enable the floppy controller IRQ mapping
+*/
+		irq.as_uchar =
+		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+		 
+		irq.by_field.fdc_irq =
+		    SMC37c669_RAW_DEVICE_IRQ(
+			SMC37c669_xlate_irq( local_config[ func ].irq )
+		    );
+		 
+		SMC37c669_write_config(
+		    SMC37c669_PARALLEL_FDC_IRQ_INDEX,
+		    irq.as_uchar
+		);
+/*
+** Enable the floppy controller base address mapping
+*/
+		base_addr.as_uchar = 0;
+		base_addr.by_field.addr9_4 = local_config[ func ].port1 >> 4;
+		 
+		SMC37c669_write_config(
+		    SMC37c669_FDC_BASE_ADDRESS_INDEX,
+		    base_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+	case IDE_0:
+	    {
+	    	SMC37c669_IDE_ADDRESS_REGISTER ide_addr;
+/*
+** Enable the IDE alternate status base address mapping
+*/
+	    	ide_addr.as_uchar = 0;
+		ide_addr.by_field.addr9_4 = local_config[ func ].port2 >> 4;
+		 
+		SMC37c669_write_config(
+		    SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX,
+		    ide_addr.as_uchar
+		);
+/*
+** Enable the IDE controller base address mapping
+*/
+		ide_addr.as_uchar = 0;
+		ide_addr.by_field.addr9_4 = local_config[ func ].port1 >> 4;
+		 
+		SMC37c669_write_config(
+		    SMC37c669_IDE_BASE_ADDRESS_INDEX,
+		    ide_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+    }
+/*
+** Exit configuration mode and return
+*/
+    SMC37c669_config_mode( FALSE );
+
+    return ret_val;
+}
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function disables a device function within the
+**	SMC37c669 Super I/O controller.
+**
+**  FORMAL PARAMETERS:
+**
+**      func:
+**          Which function to disable
+**
+**  RETURN VALUE:
+**
+**      Return TRUE if the device function was disabled, otherwise, FALSE
+**
+**  SIDE EFFECTS:
+**
+**      {@description or none@}
+**
+**  DESIGN:
+**
+**      Disabling a function in the SMC37c669 device involves
+**	disabling all the function's mappings (port, irq, drq ...).
+**	A shadow copy of the device configuration is maintained
+**	in local storage so we won't worry aboving saving the
+**	current configuration information.
+**
+**--
+*/
+unsigned int __init SMC37c669_disable_device ( unsigned int func )
+{
+    unsigned int ret_val = FALSE;
+
+/*
+** Put the device into configuration mode
+*/
+    SMC37c669_config_mode( TRUE );
+    switch ( func ) {
+    	case SERIAL_0:
+	    {
+	    	SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
+		SMC37c669_SERIAL_IRQ_REGISTER irq;
+/*
+** Disable the serial 1 IRQ mapping
+*/
+	    	irq.as_uchar = 
+		    SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+
+		irq.by_field.uart1_irq = 0;
+
+		SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
+/*
+** Disable the serial 1 port base address mapping
+*/
+		base_addr.as_uchar = 0;
+		SMC37c669_write_config( 
+		    SMC37c669_SERIAL0_BASE_ADDRESS_INDEX,
+		    base_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+	case SERIAL_1:
+	    {
+	    	SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
+		SMC37c669_SERIAL_IRQ_REGISTER irq;
+/*
+** Disable the serial 2 IRQ mapping
+*/
+	    	irq.as_uchar = 
+		    SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+
+		irq.by_field.uart2_irq = 0;
+
+		SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
+/*
+** Disable the serial 2 port base address mapping
+*/
+		base_addr.as_uchar = 0;
+
+		SMC37c669_write_config( 
+		    SMC37c669_SERIAL1_BASE_ADDRESS_INDEX,
+		    base_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+	case PARALLEL_0:
+	    {
+	    	SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER base_addr;
+		SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
+		SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
+/*
+** Disable the parallel port DMA channel mapping
+*/
+	    	drq.as_uchar =
+		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+
+		drq.by_field.ppt_drq = 0;
+
+		SMC37c669_write_config(
+		    SMC37c669_PARALLEL_FDC_DRQ_INDEX,
+		    drq.as_uchar
+		);
+/*
+** Disable the parallel port IRQ mapping
+*/
+		irq.as_uchar = 
+		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+
+		irq.by_field.ppt_irq = 0;
+
+		SMC37c669_write_config( 
+		    SMC37c669_PARALLEL_FDC_IRQ_INDEX,
+		    irq.as_uchar
+		);
+/*
+** Disable the parallel port base address mapping
+*/
+		base_addr.as_uchar = 0;
+
+		SMC37c669_write_config(
+		    SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX,
+		    base_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+	case FLOPPY_0:
+	    {
+	    	SMC37c669_FDC_BASE_ADDRESS_REGISTER base_addr;
+		SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
+		SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
+/*
+** Disable the floppy controller DMA channel mapping
+*/
+	    	drq.as_uchar =
+		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+		 
+		drq.by_field.fdc_drq = 0;
+		 
+		SMC37c669_write_config( 
+		    SMC37c669_PARALLEL_FDC_DRQ_INDEX,
+		    drq.as_uchar
+		);
+/*
+** Disable the floppy controller IRQ mapping
+*/
+		irq.as_uchar =
+		    SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+		 
+		irq.by_field.fdc_irq = 0;
+		 
+		SMC37c669_write_config(
+		    SMC37c669_PARALLEL_FDC_IRQ_INDEX,
+		    irq.as_uchar
+		);
+/*
+** Disable the floppy controller base address mapping
+*/
+		base_addr.as_uchar = 0;
+		 
+		SMC37c669_write_config(
+		    SMC37c669_FDC_BASE_ADDRESS_INDEX,
+		    base_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+	case IDE_0:
+	    {
+	    	SMC37c669_IDE_ADDRESS_REGISTER ide_addr;
+/*
+** Disable the IDE alternate status base address mapping
+*/
+	    	ide_addr.as_uchar = 0;
+		 
+		SMC37c669_write_config(
+		    SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX,
+		    ide_addr.as_uchar
+		);
+/*
+** Disable the IDE controller base address mapping
+*/
+		ide_addr.as_uchar = 0;
+		 
+		SMC37c669_write_config(
+		    SMC37c669_IDE_BASE_ADDRESS_INDEX,
+		    ide_addr.as_uchar
+		);
+		ret_val = TRUE;
+		break;
+	    }
+    }
+/*
+** Exit configuration mode and return
+*/
+    SMC37c669_config_mode( FALSE );
+
+    return ret_val;
+}
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function configures a device function within the 
+**	SMC37c669 Super I/O controller.
+**
+**  FORMAL PARAMETERS:
+**
+**      func:
+**          Which device function
+**       
+**      port:
+**          I/O port for the function to use
+**	 
+**      irq:
+**          IRQ for the device function to use
+**	 
+**      drq:
+**          DMA channel for the device function to use
+**
+**  RETURN VALUE:
+**
+**      Returns TRUE if the device function was configured, 
+**	otherwise, FALSE.
+**
+**  SIDE EFFECTS:
+**
+**      {@description or none@}
+**
+**  DESIGN:
+**
+**	If this function returns TRUE, the local shadow copy of
+**	the configuration is also updated.  If the device function
+**	is currently disabled, only the local shadow copy is 
+**	updated and the actual device function will be updated
+**	if/when it is enabled.
+**
+**--
+*/
+unsigned int __init SMC37c669_configure_device (
+    unsigned int func,
+    int port,
+    int irq,
+    int drq )
+{
+    struct DEVICE_CONFIG *cp;
+
+/*
+** Check for a valid configuration
+*/
+    if ( ( cp = SMC37c669_get_config ( func ) ) != NULL ) {
+/*
+** Configuration is valid, update the local shadow copy
+*/
+    	if ( ( drq & ~0xFF ) == 0 ) {
+	    cp->drq = drq;
+	}
+	if ( ( irq & ~0xFF ) == 0 ) {
+	    cp->irq = irq;
+	}
+	if ( ( port & ~0xFFFF ) == 0 ) {
+	    cp->port1 = port;
+	}
+/*
+** If the device function is enabled, update the actual
+** device configuration.
+*/
+	if ( SMC37c669_is_device_enabled( func ) ) {
+	    SMC37c669_enable_device( func );
+	}
+	return TRUE;
+    }
+    return FALSE;
+}
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function determines whether a device function
+**	within the SMC37c669 controller is enabled.
+**
+**  FORMAL PARAMETERS:
+**
+**      func:
+**          Which device function
+**
+**  RETURN VALUE:
+**
+**      Returns TRUE if the device function is enabled, otherwise, FALSE
+**
+**  SIDE EFFECTS:
+**
+**      {@description or none@}
+**
+**  DESIGN:
+**
+**      To check whether a device is enabled we will only look at 
+**	the port base address mapping.  According to the SMC37c669
+**	specification, all of the port base address mappings are
+**	disabled if the addr<9:8> (bits <7:6> of the register) are
+**	zero.
+**
+**--
+*/
+static unsigned int __init SMC37c669_is_device_enabled ( unsigned int func )
+{
+    unsigned char base_addr = 0;
+    unsigned int dev_ok = FALSE;
+    unsigned int ret_val = FALSE;
+/*
+** Enter configuration mode
+*/
+    SMC37c669_config_mode( TRUE );
+     
+    switch ( func ) {
+    	case SERIAL_0:
+	    base_addr =
+		SMC37c669_read_config( SMC37c669_SERIAL0_BASE_ADDRESS_INDEX );
+	    dev_ok = TRUE;
+	    break;
+	case SERIAL_1:
+	    base_addr =
+		SMC37c669_read_config( SMC37c669_SERIAL1_BASE_ADDRESS_INDEX );
+	    dev_ok = TRUE;
+	    break;
+	case PARALLEL_0:
+	    base_addr =
+		SMC37c669_read_config( SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX );
+	    dev_ok = TRUE;
+	    break;
+	case FLOPPY_0:
+	    base_addr =
+		SMC37c669_read_config( SMC37c669_FDC_BASE_ADDRESS_INDEX );
+	    dev_ok = TRUE;
+	    break;
+	case IDE_0:
+	    base_addr =
+		SMC37c669_read_config( SMC37c669_IDE_BASE_ADDRESS_INDEX );
+	    dev_ok = TRUE;
+	    break;
+    }
+/*
+** If we have a valid device, check base_addr<7:6> to see if the
+** device is enabled (mapped).
+*/
+    if ( ( dev_ok ) && ( ( base_addr & 0xC0 ) != 0 ) ) {
+/*
+** The mapping is not disabled, so assume that the function is 
+** enabled.
+*/
+    	ret_val = TRUE;
+    }
+/*
+** Exit configuration mode 
+*/
+    SMC37c669_config_mode( FALSE );
+
+    return ret_val;
+}
+
+
+#if 0
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function retrieves the configuration information of a 
+**	device function within the SMC37c699 Super I/O controller.
+**
+**  FORMAL PARAMETERS:
+**
+**      func:
+**          Which device function
+**       
+**      port:
+**          I/O port returned
+**	 
+**      irq:
+**          IRQ returned
+**	 
+**      drq:
+**          DMA channel returned
+**
+**  RETURN VALUE:
+**
+**      Returns TRUE if the device configuration was successfully
+**	retrieved, otherwise, FALSE.
+**
+**  SIDE EFFECTS:
+**
+**      The data pointed to by the port, irq, and drq parameters
+**	my be modified even if the configuration is not successfully
+**	retrieved.
+**
+**  DESIGN:
+**
+**      The device configuration is fetched from the local shadow
+**	copy.  Any unused parameters will be set to -1.  Any
+**	parameter which is not desired can specify the NULL
+**	pointer.
+**
+**--
+*/
+static unsigned int __init SMC37c669_get_device_config (
+    unsigned int func,
+    int *port,
+    int *irq,
+    int *drq )
+{
+    struct DEVICE_CONFIG *cp;
+    unsigned int ret_val = FALSE;
+/*
+** Check for a valid device configuration
+*/
+    if ( ( cp = SMC37c669_get_config( func ) ) != NULL ) {
+    	if ( drq != NULL ) {
+	    *drq = cp->drq;
+	    ret_val = TRUE;
+	}
+	if ( irq != NULL ) {
+	    *irq = cp->irq;
+	    ret_val = TRUE;
+	}
+	if ( port != NULL ) {
+	    *port = cp->port1;
+	    ret_val = TRUE;
+	}
+    }
+    return ret_val;
+}
+#endif
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function displays the current state of the SMC37c699
+**	Super I/O controller's device functions.
+**
+**  FORMAL PARAMETERS:
+**
+**      None
+**
+**  RETURN VALUE:
+**
+**      None
+**
+**  SIDE EFFECTS:
+**
+**      None
+**
+**--
+*/
+void __init SMC37c669_display_device_info ( void )
+{
+    if ( SMC37c669_is_device_enabled( SERIAL_0 ) ) {
+    	printk( "  Serial 0:    Enabled [ Port 0x%x, IRQ %d ]\n",
+		 local_config[ SERIAL_0 ].port1,
+		 local_config[ SERIAL_0 ].irq
+	);
+    }
+    else {
+    	printk( "  Serial 0:    Disabled\n" );
+    }
+
+    if ( SMC37c669_is_device_enabled( SERIAL_1 ) ) {
+    	printk( "  Serial 1:    Enabled [ Port 0x%x, IRQ %d ]\n",
+		 local_config[ SERIAL_1 ].port1,
+		 local_config[ SERIAL_1 ].irq
+	);
+    }
+    else {
+    	printk( "  Serial 1:    Disabled\n" );
+    }
+
+    if ( SMC37c669_is_device_enabled( PARALLEL_0 ) ) {
+    	printk( "  Parallel:    Enabled [ Port 0x%x, IRQ %d/%d ]\n",
+		 local_config[ PARALLEL_0 ].port1,
+		 local_config[ PARALLEL_0 ].irq,
+		 local_config[ PARALLEL_0 ].drq
+	);
+    }
+    else {
+    	printk( "  Parallel:    Disabled\n" );
+    }
+
+    if ( SMC37c669_is_device_enabled( FLOPPY_0 ) ) {
+    	printk( "  Floppy Ctrl: Enabled [ Port 0x%x, IRQ %d/%d ]\n",
+		 local_config[ FLOPPY_0 ].port1,
+		 local_config[ FLOPPY_0 ].irq,
+		 local_config[ FLOPPY_0 ].drq
+	);
+    }
+    else {
+    	printk( "  Floppy Ctrl: Disabled\n" );
+    }
+
+    if ( SMC37c669_is_device_enabled( IDE_0 ) ) {
+    	printk( "  IDE 0:       Enabled [ Port 0x%x, IRQ %d ]\n",
+		 local_config[ IDE_0 ].port1,
+		 local_config[ IDE_0 ].irq
+	);
+    }
+    else {
+    	printk( "  IDE 0:       Disabled\n" );
+    }
+}
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function puts the SMC37c669 Super I/O controller into,
+**	and takes it out of, configuration mode.
+**
+**  FORMAL PARAMETERS:
+**
+**      enable:
+**          TRUE to enter configuration mode, FALSE to exit.
+**
+**  RETURN VALUE:
+**
+**      None
+**
+**  SIDE EFFECTS:
+**
+**      The SMC37c669 controller may be left in configuration mode.
+**
+**--
+*/
+static void __init SMC37c669_config_mode( 
+    unsigned int enable )
+{
+    if ( enable ) {
+/*
+** To enter configuration mode, two writes in succession to the index
+** port are required.  If a write to another address or port occurs
+** between these two writes, the chip does not enter configuration
+** mode.  Therefore, a spinlock is placed around the two writes to 
+** guarantee that they complete uninterrupted.
+*/
+	spin_lock(&smc_lock);
+    	wb( &SMC37c669->index_port, SMC37c669_CONFIG_ON_KEY );
+    	wb( &SMC37c669->index_port, SMC37c669_CONFIG_ON_KEY );
+	spin_unlock(&smc_lock);
+    }
+    else {
+    	wb( &SMC37c669->index_port, SMC37c669_CONFIG_OFF_KEY );
+    }
+}
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function reads an SMC37c669 Super I/O controller
+**	configuration register.  This function assumes that the
+**	device is already in configuration mode.
+**
+**  FORMAL PARAMETERS:
+**
+**      index:
+**          Index value of configuration register to read
+**
+**  RETURN VALUE:
+**
+**      Data read from configuration register
+**
+**  SIDE EFFECTS:
+**
+**      None
+**
+**--
+*/
+static unsigned char __init SMC37c669_read_config( 
+    unsigned char index )
+{
+	wb(&SMC37c669->index_port, index);
+	return rb(&SMC37c669->data_port);
+}
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function writes an SMC37c669 Super I/O controller
+**	configuration register.  This function assumes that the
+**	device is already in configuration mode.
+**
+**  FORMAL PARAMETERS:
+**
+**      index:
+**          Index of configuration register to write
+**       
+**      data:
+**          Data to be written
+**
+**  RETURN VALUE:
+**
+**      None
+**
+**  SIDE EFFECTS:
+**
+**      None
+**
+**--
+*/
+static void __init SMC37c669_write_config( 
+    unsigned char index, 
+    unsigned char data )
+{
+    wb( &SMC37c669->index_port, index );
+    wb( &SMC37c669->data_port, data );
+}
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function initializes the local device
+**	configuration storage.  This function assumes
+**	that the device is already in configuration
+**	mode.
+**
+**  FORMAL PARAMETERS:
+**
+**      None
+**
+**  RETURN VALUE:
+**
+**      None
+**
+**  SIDE EFFECTS:
+**
+**      Local storage for device configuration information
+**	is initialized.
+**
+**--
+*/
+static void __init SMC37c669_init_local_config ( void )
+{
+    SMC37c669_SERIAL_BASE_ADDRESS_REGISTER uart_base;
+    SMC37c669_SERIAL_IRQ_REGISTER uart_irqs;
+    SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER ppt_base;
+    SMC37c669_PARALLEL_FDC_IRQ_REGISTER ppt_fdc_irqs;
+    SMC37c669_PARALLEL_FDC_DRQ_REGISTER ppt_fdc_drqs;
+    SMC37c669_FDC_BASE_ADDRESS_REGISTER fdc_base;
+    SMC37c669_IDE_ADDRESS_REGISTER ide_base;
+    SMC37c669_IDE_ADDRESS_REGISTER ide_alt;
+
+/*
+** Get serial port 1 base address 
+*/
+    uart_base.as_uchar = 
+	SMC37c669_read_config( SMC37c669_SERIAL0_BASE_ADDRESS_INDEX );
+/*
+** Get IRQs for serial ports 1 & 2
+*/
+    uart_irqs.as_uchar = 
+	SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+/*
+** Store local configuration information for serial port 1
+*/
+    local_config[SERIAL_0].port1 = uart_base.by_field.addr9_3 << 3;
+    local_config[SERIAL_0].irq = 
+	SMC37c669_xlate_irq( 
+	    SMC37c669_DEVICE_IRQ( uart_irqs.by_field.uart1_irq ) 
+	);
+/*
+** Get serial port 2 base address
+*/
+    uart_base.as_uchar = 
+	SMC37c669_read_config( SMC37c669_SERIAL1_BASE_ADDRESS_INDEX );
+/*
+** Store local configuration information for serial port 2
+*/
+    local_config[SERIAL_1].port1 = uart_base.by_field.addr9_3 << 3;
+    local_config[SERIAL_1].irq = 
+	SMC37c669_xlate_irq( 
+	    SMC37c669_DEVICE_IRQ( uart_irqs.by_field.uart2_irq ) 
+	);
+/*
+** Get parallel port base address
+*/
+    ppt_base.as_uchar =
+	SMC37c669_read_config( SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX );
+/*
+** Get IRQs for parallel port and floppy controller
+*/
+    ppt_fdc_irqs.as_uchar =
+	SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+/*
+** Get DRQs for parallel port and floppy controller
+*/
+    ppt_fdc_drqs.as_uchar =
+	SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+/*
+** Store local configuration information for parallel port
+*/
+    local_config[PARALLEL_0].port1 = ppt_base.by_field.addr9_2 << 2;
+    local_config[PARALLEL_0].irq =
+	SMC37c669_xlate_irq(
+	    SMC37c669_DEVICE_IRQ( ppt_fdc_irqs.by_field.ppt_irq )
+	);
+    local_config[PARALLEL_0].drq =
+	SMC37c669_xlate_drq(
+	    SMC37c669_DEVICE_DRQ( ppt_fdc_drqs.by_field.ppt_drq )
+	);
+/*
+** Get floppy controller base address
+*/
+    fdc_base.as_uchar = 
+	SMC37c669_read_config( SMC37c669_FDC_BASE_ADDRESS_INDEX );
+/*
+** Store local configuration information for floppy controller
+*/
+    local_config[FLOPPY_0].port1 = fdc_base.by_field.addr9_4 << 4;
+    local_config[FLOPPY_0].irq =
+	SMC37c669_xlate_irq(
+	    SMC37c669_DEVICE_IRQ( ppt_fdc_irqs.by_field.fdc_irq )
+	);
+    local_config[FLOPPY_0].drq =
+	SMC37c669_xlate_drq(
+	    SMC37c669_DEVICE_DRQ( ppt_fdc_drqs.by_field.fdc_drq )
+	);
+/*
+** Get IDE controller base address
+*/
+    ide_base.as_uchar =
+	SMC37c669_read_config( SMC37c669_IDE_BASE_ADDRESS_INDEX );
+/*
+** Get IDE alternate status base address
+*/
+    ide_alt.as_uchar =
+	SMC37c669_read_config( SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX );
+/*
+** Store local configuration information for IDE controller
+*/
+    local_config[IDE_0].port1 = ide_base.by_field.addr9_4 << 4;
+    local_config[IDE_0].port2 = ide_alt.by_field.addr9_4 << 4;
+    local_config[IDE_0].irq = 14;
+}
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function returns a pointer to the local shadow
+**	configuration of the requested device function.
+**
+**  FORMAL PARAMETERS:
+**
+**      func:
+**          Which device function
+**
+**  RETURN VALUE:
+**
+**      Returns a pointer to the DEVICE_CONFIG structure for the
+**	requested function, otherwise, NULL.
+**
+**  SIDE EFFECTS:
+**
+**      {@description or none@}
+**
+**--
+*/
+static struct DEVICE_CONFIG * __init SMC37c669_get_config( unsigned int func )
+{
+    struct DEVICE_CONFIG *cp = NULL;
+
+    switch ( func ) {
+    	case SERIAL_0:
+	    cp = &local_config[ SERIAL_0 ];
+	    break;
+	case SERIAL_1:
+	    cp = &local_config[ SERIAL_1 ];
+	    break;
+	case PARALLEL_0:
+	    cp = &local_config[ PARALLEL_0 ];
+	    break;
+	case FLOPPY_0:
+	    cp = &local_config[ FLOPPY_0 ];
+	    break;
+	case IDE_0:
+	    cp = &local_config[ IDE_0 ];
+	    break;
+    }
+    return cp;
+}
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function translates IRQs back and forth between ISA
+**	IRQs and SMC37c669 device IRQs.
+**
+**  FORMAL PARAMETERS:
+**
+**      irq:
+**          The IRQ to translate
+**
+**  RETURN VALUE:
+**
+**      Returns the translated IRQ, otherwise, returns -1.
+**
+**  SIDE EFFECTS:
+**
+**      {@description or none@}
+**
+**--
+*/
+static int __init SMC37c669_xlate_irq ( int irq )
+{
+    int i, translated_irq = -1;
+
+    if ( SMC37c669_IS_DEVICE_IRQ( irq ) ) {
+/*
+** We are translating a device IRQ to an ISA IRQ
+*/
+    	for ( i = 0; ( SMC37c669_irq_table[i].device_irq != -1 ) || ( SMC37c669_irq_table[i].isa_irq != -1 ); i++ ) {
+	    if ( irq == SMC37c669_irq_table[i].device_irq ) {
+	    	translated_irq = SMC37c669_irq_table[i].isa_irq;
+		break;
+	    }
+	}
+    }
+    else {
+/*
+** We are translating an ISA IRQ to a device IRQ
+*/
+    	for ( i = 0; ( SMC37c669_irq_table[i].isa_irq != -1 ) || ( SMC37c669_irq_table[i].device_irq != -1 ); i++ ) {
+	    if ( irq == SMC37c669_irq_table[i].isa_irq ) {
+	    	translated_irq = SMC37c669_irq_table[i].device_irq;
+		break;
+	    }
+	}
+    }
+    return translated_irq;
+}
+
+
+/*
+**++
+**  FUNCTIONAL DESCRIPTION:
+**
+**      This function translates DMA channels back and forth between
+**	ISA DMA channels and SMC37c669 device DMA channels.
+**
+**  FORMAL PARAMETERS:
+**
+**      drq:
+**          The DMA channel to translate
+**
+**  RETURN VALUE:
+**
+**      Returns the translated DMA channel, otherwise, returns -1
+**
+**  SIDE EFFECTS:
+**
+**      {@description or none@}
+**
+**--
+*/
+static int __init SMC37c669_xlate_drq ( int drq )
+{
+    int i, translated_drq = -1;
+
+    if ( SMC37c669_IS_DEVICE_DRQ( drq ) ) {
+/*
+** We are translating a device DMA channel to an ISA DMA channel
+*/
+    	for ( i = 0; ( SMC37c669_drq_table[i].device_drq != -1 ) || ( SMC37c669_drq_table[i].isa_drq != -1 ); i++ ) {
+	    if ( drq == SMC37c669_drq_table[i].device_drq ) {
+	    	translated_drq = SMC37c669_drq_table[i].isa_drq;
+		break;
+	    }
+	}
+    }
+    else {
+/*
+** We are translating an ISA DMA channel to a device DMA channel
+*/
+    	for ( i = 0; ( SMC37c669_drq_table[i].isa_drq != -1 ) || ( SMC37c669_drq_table[i].device_drq != -1 ); i++ ) {
+	    if ( drq == SMC37c669_drq_table[i].isa_drq ) {
+	    	translated_drq = SMC37c669_drq_table[i].device_drq;
+		break;
+	    }
+	}
+    }
+    return translated_drq;
+}
+
+#if 0
+int __init smcc669_init ( void )
+{
+    struct INODE *ip;
+
+    allocinode( smc_ddb.name, 1, &ip );
+    ip->dva = &smc_ddb;
+    ip->attr = ATTR$M_WRITE | ATTR$M_READ;
+    ip->len[0] = 0x30;
+    ip->misc = 0;
+    INODE_UNLOCK( ip );
+
+    return msg_success;
+}
+
+int __init smcc669_open( struct FILE *fp, char *info, char *next, char *mode )
+{
+    struct INODE *ip;
+/*
+** Allow multiple readers but only one writer.  ip->misc keeps track
+** of the number of writers
+*/
+    ip = fp->ip;
+    INODE_LOCK( ip );
+    if ( fp->mode & ATTR$M_WRITE ) {
+	if ( ip->misc ) {
+	    INODE_UNLOCK( ip );
+	    return msg_failure;	    /* too many writers */
+	}
+	ip->misc++;
+    }
+/*
+** Treat the information field as a byte offset
+*/
+    *fp->offset = xtoi( info );
+    INODE_UNLOCK( ip );
+
+    return msg_success;
+}
+
+int __init smcc669_close( struct FILE *fp )
+{
+    struct INODE *ip;
+
+    ip = fp->ip;
+    if ( fp->mode & ATTR$M_WRITE ) {
+	INODE_LOCK( ip );
+	ip->misc--;
+	INODE_UNLOCK( ip );
+    }
+    return msg_success;
+}
+
+int __init smcc669_read( struct FILE *fp, int size, int number, unsigned char *buf )
+{
+    int i;
+    int length;
+    int nbytes;
+    struct INODE *ip;
+
+/*
+** Always access a byte at a time
+*/
+    ip = fp->ip;
+    length = size * number;
+    nbytes = 0;
+
+    SMC37c669_config_mode( TRUE );
+    for ( i = 0; i < length; i++ ) {
+	if ( !inrange( *fp->offset, 0, ip->len[0] ) ) 
+	    break;
+	*buf++ = SMC37c669_read_config( *fp->offset );
+	*fp->offset += 1;
+	nbytes++;
+    }
+    SMC37c669_config_mode( FALSE );
+    return nbytes;
+}
+
+int __init smcc669_write( struct FILE *fp, int size, int number, unsigned char *buf )
+{
+    int i;
+    int length;
+    int nbytes;
+    struct INODE *ip;
+/*
+** Always access a byte at a time
+*/
+    ip = fp->ip;
+    length = size * number;
+    nbytes = 0;
+
+    SMC37c669_config_mode( TRUE );
+    for ( i = 0; i < length; i++ ) {
+	if ( !inrange( *fp->offset, 0, ip->len[0] ) ) 
+	    break;
+	SMC37c669_write_config( *fp->offset, *buf );
+	*fp->offset += 1;
+	buf++;
+	nbytes++;
+    }
+    SMC37c669_config_mode( FALSE );
+    return nbytes;
+}
+#endif
+
+void __init
+SMC37c669_dump_registers(void)
+{
+  int i;
+  for (i = 0; i <= 0x29; i++)
+    printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
+}
+/*+
+ * ============================================================================
+ * = SMC_init - SMC37c669 Super I/O controller initialization                 =
+ * ============================================================================
+ *
+ * OVERVIEW:
+ *
+ *      This routine configures and enables device functions on the
+ *      SMC37c669 Super I/O controller.
+ *
+ * FORM OF CALL:
+ *
+ *      SMC_init( );
+ *
+ * RETURNS:
+ *
+ *      Nothing
+ *
+ * ARGUMENTS:
+ *
+ *      None
+ *
+ * SIDE EFFECTS:
+ *
+ *      None
+ *
+ */
+void __init SMC669_Init ( int index )
+{
+    SMC37c669_CONFIG_REGS *SMC_base;
+    unsigned long flags;
+
+    local_irq_save(flags);
+    if ( ( SMC_base = SMC37c669_detect( index ) ) != NULL ) {
+#if SMC_DEBUG
+	SMC37c669_config_mode( TRUE );
+	SMC37c669_dump_registers( );
+	SMC37c669_config_mode( FALSE );
+        SMC37c669_display_device_info( );
+#endif
+        SMC37c669_disable_device( SERIAL_0 );
+        SMC37c669_configure_device(
+            SERIAL_0,
+            COM1_BASE,
+            COM1_IRQ,
+            -1
+        );
+        SMC37c669_enable_device( SERIAL_0 );
+
+        SMC37c669_disable_device( SERIAL_1 );
+        SMC37c669_configure_device(
+            SERIAL_1,
+            COM2_BASE,
+            COM2_IRQ,
+            -1
+        );
+        SMC37c669_enable_device( SERIAL_1 );
+
+        SMC37c669_disable_device( PARALLEL_0 );
+        SMC37c669_configure_device(
+            PARALLEL_0,
+            PARP_BASE,
+            PARP_IRQ,
+            PARP_DRQ
+        );
+        SMC37c669_enable_device( PARALLEL_0 );
+
+        SMC37c669_disable_device( FLOPPY_0 );
+        SMC37c669_configure_device(
+            FLOPPY_0,
+            FDC_BASE,
+            FDC_IRQ,
+            FDC_DRQ
+        );
+        SMC37c669_enable_device( FLOPPY_0 );
+          
+	/* Wake up sometimes forgotten floppy, especially on DP264. */
+	outb(0xc, 0x3f2);
+
+        SMC37c669_disable_device( IDE_0 );
+
+#if SMC_DEBUG
+	SMC37c669_config_mode( TRUE );
+	SMC37c669_dump_registers( );
+	SMC37c669_config_mode( FALSE );
+        SMC37c669_display_device_info( );
+#endif
+	local_irq_restore(flags);
+        printk( "SMC37c669 Super I/O Controller found @ 0x%p\n",
+		SMC_base );
+    }
+    else {
+	local_irq_restore(flags);
+#if SMC_DEBUG
+        printk( "No SMC37c669 Super I/O Controller found\n" );
+#endif
+    }
+}
diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
new file mode 100644
index 0000000000..71cd7aca38
--- /dev/null
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SMC 37C93X initialization code
+ */
+
+#include <linux/kernel.h>
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/hwrpb.h>
+#include <asm/io.h>
+
+#define SMC_DEBUG 0
+
+#if SMC_DEBUG
+# define DBG_DEVS(args)         printk args
+#else
+# define DBG_DEVS(args)
+#endif
+
+#define KB              1024
+#define MB              (1024*KB)
+#define GB              (1024*MB)
+
+/* device "activate" register contents */
+#define DEVICE_ON		1
+#define DEVICE_OFF		0
+
+/* configuration on/off keys */
+#define CONFIG_ON_KEY		0x55
+#define CONFIG_OFF_KEY		0xaa
+
+/* configuration space device definitions */
+#define FDC			0
+#define IDE1			1
+#define IDE2			2
+#define PARP			3
+#define SER1			4
+#define SER2			5
+#define RTCL			6
+#define KYBD			7
+#define AUXIO			8
+
+/* Chip register offsets from base */
+#define CONFIG_CONTROL		0x02
+#define INDEX_ADDRESS		0x03
+#define LOGICAL_DEVICE_NUMBER	0x07
+#define DEVICE_ID		0x20
+#define DEVICE_REV		0x21
+#define POWER_CONTROL		0x22
+#define POWER_MGMT		0x23
+#define OSC			0x24
+
+#define ACTIVATE		0x30
+#define ADDR_HI			0x60
+#define ADDR_LO			0x61
+#define INTERRUPT_SEL		0x70
+#define INTERRUPT_SEL_2		0x72 /* KYBD/MOUS only */
+#define DMA_CHANNEL_SEL		0x74 /* FDC/PARP only */
+
+#define FDD_MODE_REGISTER	0x90
+#define FDD_OPTION_REGISTER	0x91
+
+/* values that we read back that are expected ... */
+#define VALID_DEVICE_ID		2
+
+/* default device addresses */
+#define KYBD_INTERRUPT		1
+#define MOUS_INTERRUPT		12
+#define COM2_BASE		0x2f8
+#define COM2_INTERRUPT		3
+#define COM1_BASE		0x3f8
+#define COM1_INTERRUPT		4
+#define PARP_BASE		0x3bc
+#define PARP_INTERRUPT		7
+
+static unsigned long __init SMCConfigState(unsigned long baseAddr)
+{
+	unsigned char devId;
+
+	unsigned long configPort;
+	unsigned long indexPort;
+	unsigned long dataPort;
+
+	int i;
+
+	configPort = indexPort = baseAddr;
+	dataPort = configPort + 1;
+
+#define NUM_RETRIES 5
+
+	for (i = 0; i < NUM_RETRIES; i++)
+	{
+		outb(CONFIG_ON_KEY, configPort);
+		outb(CONFIG_ON_KEY, configPort);
+		outb(DEVICE_ID, indexPort);
+		devId = inb(dataPort);
+		if (devId == VALID_DEVICE_ID) {
+			outb(DEVICE_REV, indexPort);
+			/* unsigned char devRev = */ inb(dataPort);
+			break;
+		}
+		else
+			udelay(100);
+	}
+	return (i != NUM_RETRIES) ? baseAddr : 0L;
+}
+
+static void __init SMCRunState(unsigned long baseAddr)
+{
+	outb(CONFIG_OFF_KEY, baseAddr);
+}
+
+static unsigned long __init SMCDetectUltraIO(void)
+{
+	unsigned long baseAddr;
+
+	baseAddr = 0x3F0;
+	if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
+		return( baseAddr );
+	}
+	baseAddr = 0x370;
+	if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
+		return( baseAddr );
+	}
+	return( ( unsigned long )0 );
+}
+
+static void __init SMCEnableDevice(unsigned long baseAddr,
+			    unsigned long device,
+			    unsigned long portaddr,
+			    unsigned long interrupt)
+{
+	unsigned long indexPort;
+	unsigned long dataPort;
+
+	indexPort = baseAddr;
+	dataPort = baseAddr + 1;
+
+	outb(LOGICAL_DEVICE_NUMBER, indexPort);
+	outb(device, dataPort);
+
+	outb(ADDR_LO, indexPort);
+	outb(( portaddr & 0xFF ), dataPort);
+
+	outb(ADDR_HI, indexPort);
+	outb((portaddr >> 8) & 0xFF, dataPort);
+
+	outb(INTERRUPT_SEL, indexPort);
+	outb(interrupt, dataPort);
+
+	outb(ACTIVATE, indexPort);
+	outb(DEVICE_ON, dataPort);
+}
+
+static void __init SMCEnableKYBD(unsigned long baseAddr)
+{
+	unsigned long indexPort;
+	unsigned long dataPort;
+
+	indexPort = baseAddr;
+	dataPort = baseAddr + 1;
+
+	outb(LOGICAL_DEVICE_NUMBER, indexPort);
+	outb(KYBD, dataPort);
+
+	outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
+	outb(KYBD_INTERRUPT, dataPort);
+
+	outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
+	outb(MOUS_INTERRUPT, dataPort);
+
+	outb(ACTIVATE, indexPort);
+	outb(DEVICE_ON, dataPort);
+}
+
+static void __init SMCEnableFDC(unsigned long baseAddr)
+{
+	unsigned long indexPort;
+	unsigned long dataPort;
+
+	unsigned char oldValue;
+
+	indexPort = baseAddr;
+	dataPort = baseAddr + 1;
+
+	outb(LOGICAL_DEVICE_NUMBER, indexPort);
+	outb(FDC, dataPort);
+
+	outb(FDD_MODE_REGISTER, indexPort);
+	oldValue = inb(dataPort);
+
+	oldValue |= 0x0E;                   /* Enable burst mode */
+	outb(oldValue, dataPort);
+
+	outb(INTERRUPT_SEL, indexPort);	    /* Primary interrupt select */
+	outb(0x06, dataPort );
+
+	outb(DMA_CHANNEL_SEL, indexPort);   /* DMA channel select */
+	outb(0x02, dataPort);
+
+	outb(ACTIVATE, indexPort);
+	outb(DEVICE_ON, dataPort);
+}
+
+#if SMC_DEBUG
+static void __init SMCReportDeviceStatus(unsigned long baseAddr)
+{
+	unsigned long indexPort;
+	unsigned long dataPort;
+	unsigned char currentControl;
+
+	indexPort = baseAddr;
+	dataPort = baseAddr + 1;
+
+	outb(POWER_CONTROL, indexPort);
+	currentControl = inb(dataPort);
+
+	printk(currentControl & (1 << FDC)
+	       ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
+	printk(currentControl & (1 << IDE1)
+	       ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
+	printk(currentControl & (1 << IDE2)
+	       ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
+	printk(currentControl & (1 << PARP)
+	       ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
+	printk(currentControl & (1 << SER1)
+	       ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
+	printk(currentControl & (1 << SER2)
+	       ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
+
+	printk( "\n" );
+}
+#endif
+
+int __init SMC93x_Init(void)
+{
+	unsigned long SMCUltraBase;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
+#if SMC_DEBUG
+		SMCReportDeviceStatus(SMCUltraBase);
+#endif
+		SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
+		DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
+		SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
+		DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
+		SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
+		DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
+		/* On PC164, IDE on the SMC is not enabled;
+		   CMD646 (PCI) on MB */
+		SMCEnableKYBD(SMCUltraBase);
+		DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
+		SMCEnableFDC(SMCUltraBase);
+		DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
+#if SMC_DEBUG
+		SMCReportDeviceStatus(SMCUltraBase);
+#endif
+		SMCRunState(SMCUltraBase);
+		local_irq_restore(flags);
+		printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
+		       SMCUltraBase);
+		return 1;
+	}
+	else {
+		local_irq_restore(flags);
+		DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
+		return 0;
+	}
+}
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
new file mode 100644
index 0000000000..7439b2377d
--- /dev/null
+++ b/arch/alpha/kernel/smp.c
@@ -0,0 +1,762 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/smp.c
+ *
+ *      2001-07-09 Phil Ezolt (Phillip.Ezolt@compaq.com)
+ *            Renamed modified smp_call_function to smp_call_function_on_cpu()
+ *            Created an function that conforms to the old calling convention
+ *            of smp_call_function().
+ *
+ *            This is helpful for DCPI.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/sched/mm.h>
+#include <linux/mm.h>
+#include <linux/err.h>
+#include <linux/threads.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/cache.h>
+#include <linux/profile.h>
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+
+#include <asm/hwrpb.h>
+#include <asm/ptrace.h>
+#include <linux/atomic.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+
+#define DEBUG_SMP 0
+#if DEBUG_SMP
+#define DBGS(args)	printk args
+#else
+#define DBGS(args)
+#endif
+
+/* A collection of per-processor data.  */
+struct cpuinfo_alpha cpu_data[NR_CPUS];
+EXPORT_SYMBOL(cpu_data);
+
+/* A collection of single bit ipi messages.  */
+static struct {
+	unsigned long bits ____cacheline_aligned;
+} ipi_data[NR_CPUS] __cacheline_aligned;
+
+enum ipi_message_type {
+	IPI_RESCHEDULE,
+	IPI_CALL_FUNC,
+	IPI_CPU_STOP,
+};
+
+/* Set to a secondary's cpuid when it comes online.  */
+static int smp_secondary_alive = 0;
+
+int smp_num_probed;		/* Internal processor count */
+int smp_num_cpus = 1;		/* Number that came online.  */
+EXPORT_SYMBOL(smp_num_cpus);
+
+/*
+ * Called by both boot and secondaries to move global data into
+ *  per-processor storage.
+ */
+static inline void __init
+smp_store_cpu_info(int cpuid)
+{
+	cpu_data[cpuid].loops_per_jiffy = loops_per_jiffy;
+	cpu_data[cpuid].last_asn = ASN_FIRST_VERSION;
+	cpu_data[cpuid].need_new_asn = 0;
+	cpu_data[cpuid].asn_lock = 0;
+}
+
+/*
+ * Ideally sets up per-cpu profiling hooks.  Doesn't do much now...
+ */
+static inline void __init
+smp_setup_percpu_timer(int cpuid)
+{
+	cpu_data[cpuid].prof_counter = 1;
+	cpu_data[cpuid].prof_multiplier = 1;
+}
+
+static void __init
+wait_boot_cpu_to_stop(int cpuid)
+{
+	unsigned long stop = jiffies + 10*HZ;
+
+	while (time_before(jiffies, stop)) {
+	        if (!smp_secondary_alive)
+			return;
+		barrier();
+	}
+
+	printk("wait_boot_cpu_to_stop: FAILED on CPU %d, hanging now\n", cpuid);
+	for (;;)
+		barrier();
+}
+
+/*
+ * Where secondaries begin a life of C.
+ */
+void __init
+smp_callin(void)
+{
+	int cpuid = hard_smp_processor_id();
+
+	if (cpu_online(cpuid)) {
+		printk("??, cpu 0x%x already present??\n", cpuid);
+		BUG();
+	}
+	set_cpu_online(cpuid, true);
+
+	/* Turn on machine checks.  */
+	wrmces(7);
+
+	/* Set trap vectors.  */
+	trap_init();
+
+	/* Set interrupt vector.  */
+	wrent(entInt, 0);
+
+	/* Get our local ticker going. */
+	smp_setup_percpu_timer(cpuid);
+	init_clockevent();
+
+	/* Call platform-specific callin, if specified */
+	if (alpha_mv.smp_callin)
+		alpha_mv.smp_callin();
+
+	/* All kernel threads share the same mm context.  */
+	mmgrab(&init_mm);
+	current->active_mm = &init_mm;
+
+	/* inform the notifiers about the new cpu */
+	notify_cpu_starting(cpuid);
+
+	/* Must have completely accurate bogos.  */
+	local_irq_enable();
+
+	/* Wait boot CPU to stop with irq enabled before running
+	   calibrate_delay. */
+	wait_boot_cpu_to_stop(cpuid);
+	mb();
+	calibrate_delay();
+
+	smp_store_cpu_info(cpuid);
+	/* Allow master to continue only after we written loops_per_jiffy.  */
+	wmb();
+	smp_secondary_alive = 1;
+
+	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
+	      cpuid, current, current->active_mm));
+
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+}
+
+/* Wait until hwrpb->txrdy is clear for cpu.  Return -1 on timeout.  */
+static int
+wait_for_txrdy (unsigned long cpumask)
+{
+	unsigned long timeout;
+
+	if (!(hwrpb->txrdy & cpumask))
+		return 0;
+
+	timeout = jiffies + 10*HZ;
+	while (time_before(jiffies, timeout)) {
+		if (!(hwrpb->txrdy & cpumask))
+			return 0;
+		udelay(10);
+		barrier();
+	}
+
+	return -1;
+}
+
+/*
+ * Send a message to a secondary's console.  "START" is one such
+ * interesting message.  ;-)
+ */
+static void
+send_secondary_console_msg(char *str, int cpuid)
+{
+	struct percpu_struct *cpu;
+	register char *cp1, *cp2;
+	unsigned long cpumask;
+	size_t len;
+
+	cpu = (struct percpu_struct *)
+		((char*)hwrpb
+		 + hwrpb->processor_offset
+		 + cpuid * hwrpb->processor_size);
+
+	cpumask = (1UL << cpuid);
+	if (wait_for_txrdy(cpumask))
+		goto timeout;
+
+	cp2 = str;
+	len = strlen(cp2);
+	*(unsigned int *)&cpu->ipc_buffer[0] = len;
+	cp1 = (char *) &cpu->ipc_buffer[1];
+	memcpy(cp1, cp2, len);
+
+	/* atomic test and set */
+	wmb();
+	set_bit(cpuid, &hwrpb->rxrdy);
+
+	if (wait_for_txrdy(cpumask))
+		goto timeout;
+	return;
+
+ timeout:
+	printk("Processor %x not ready\n", cpuid);
+}
+
+/*
+ * A secondary console wants to send a message.  Receive it.
+ */
+static void
+recv_secondary_console_msg(void)
+{
+	int mycpu, i, cnt;
+	unsigned long txrdy = hwrpb->txrdy;
+	char *cp1, *cp2, buf[80];
+	struct percpu_struct *cpu;
+
+	DBGS(("recv_secondary_console_msg: TXRDY 0x%lx.\n", txrdy));
+
+	mycpu = hard_smp_processor_id();
+
+	for (i = 0; i < NR_CPUS; i++) {
+		if (!(txrdy & (1UL << i)))
+			continue;
+
+		DBGS(("recv_secondary_console_msg: "
+		      "TXRDY contains CPU %d.\n", i));
+
+		cpu = (struct percpu_struct *)
+		  ((char*)hwrpb
+		   + hwrpb->processor_offset
+		   + i * hwrpb->processor_size);
+
+ 		DBGS(("recv_secondary_console_msg: on %d from %d"
+		      " HALT_REASON 0x%lx FLAGS 0x%lx\n",
+		      mycpu, i, cpu->halt_reason, cpu->flags));
+
+		cnt = cpu->ipc_buffer[0] >> 32;
+		if (cnt <= 0 || cnt >= 80)
+			strcpy(buf, "<<< BOGUS MSG >>>");
+		else {
+			cp1 = (char *) &cpu->ipc_buffer[1];
+			cp2 = buf;
+			memcpy(cp2, cp1, cnt);
+			cp2[cnt] = '\0';
+			
+			while ((cp2 = strchr(cp2, '\r')) != 0) {
+				*cp2 = ' ';
+				if (cp2[1] == '\n')
+					cp2[1] = ' ';
+			}
+		}
+
+		DBGS((KERN_INFO "recv_secondary_console_msg: on %d "
+		      "message is '%s'\n", mycpu, buf));
+	}
+
+	hwrpb->txrdy = 0;
+}
+
+/*
+ * Convince the console to have a secondary cpu begin execution.
+ */
+static int
+secondary_cpu_start(int cpuid, struct task_struct *idle)
+{
+	struct percpu_struct *cpu;
+	struct pcb_struct *hwpcb, *ipcb;
+	unsigned long timeout;
+	  
+	cpu = (struct percpu_struct *)
+		((char*)hwrpb
+		 + hwrpb->processor_offset
+		 + cpuid * hwrpb->processor_size);
+	hwpcb = (struct pcb_struct *) cpu->hwpcb;
+	ipcb = &task_thread_info(idle)->pcb;
+
+	/* Initialize the CPU's HWPCB to something just good enough for
+	   us to get started.  Immediately after starting, we'll swpctx
+	   to the target idle task's pcb.  Reuse the stack in the mean
+	   time.  Precalculate the target PCBB.  */
+	hwpcb->ksp = (unsigned long)ipcb + sizeof(union thread_union) - 16;
+	hwpcb->usp = 0;
+	hwpcb->ptbr = ipcb->ptbr;
+	hwpcb->pcc = 0;
+	hwpcb->asn = 0;
+	hwpcb->unique = virt_to_phys(ipcb);
+	hwpcb->flags = ipcb->flags;
+	hwpcb->res1 = hwpcb->res2 = 0;
+
+#if 0
+	DBGS(("KSP 0x%lx PTBR 0x%lx VPTBR 0x%lx UNIQUE 0x%lx\n",
+	      hwpcb->ksp, hwpcb->ptbr, hwrpb->vptb, hwpcb->unique));
+#endif
+	DBGS(("Starting secondary cpu %d: state 0x%lx pal_flags 0x%lx\n",
+	      cpuid, idle->state, ipcb->flags));
+
+	/* Setup HWRPB fields that SRM uses to activate secondary CPU */
+	hwrpb->CPU_restart = __smp_callin;
+	hwrpb->CPU_restart_data = (unsigned long) __smp_callin;
+
+	/* Recalculate and update the HWRPB checksum */
+	hwrpb_update_checksum(hwrpb);
+
+	/*
+	 * Send a "start" command to the specified processor.
+	 */
+
+	/* SRM III 3.4.1.3 */
+	cpu->flags |= 0x22;	/* turn on Context Valid and Restart Capable */
+	cpu->flags &= ~1;	/* turn off Bootstrap In Progress */
+	wmb();
+
+	send_secondary_console_msg("START\r\n", cpuid);
+
+	/* Wait 10 seconds for an ACK from the console.  */
+	timeout = jiffies + 10*HZ;
+	while (time_before(jiffies, timeout)) {
+		if (cpu->flags & 1)
+			goto started;
+		udelay(10);
+		barrier();
+	}
+	printk(KERN_ERR "SMP: Processor %d failed to start.\n", cpuid);
+	return -1;
+
+ started:
+	DBGS(("secondary_cpu_start: SUCCESS for CPU %d!!!\n", cpuid));
+	return 0;
+}
+
+/*
+ * Bring one cpu online.
+ */
+static int
+smp_boot_one_cpu(int cpuid, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/* Signal the secondary to wait a moment.  */
+	smp_secondary_alive = -1;
+
+	/* Whirrr, whirrr, whirrrrrrrrr... */
+	if (secondary_cpu_start(cpuid, idle))
+		return -1;
+
+	/* Notify the secondary CPU it can run calibrate_delay.  */
+	mb();
+	smp_secondary_alive = 0;
+
+	/* We've been acked by the console; wait one second for
+	   the task to start up for real.  */
+	timeout = jiffies + 1*HZ;
+	while (time_before(jiffies, timeout)) {
+		if (smp_secondary_alive == 1)
+			goto alive;
+		udelay(10);
+		barrier();
+	}
+
+	/* We failed to boot the CPU.  */
+
+	printk(KERN_ERR "SMP: Processor %d is stuck.\n", cpuid);
+	return -1;
+
+ alive:
+	/* Another "Red Snapper". */
+	return 0;
+}
+
+/*
+ * Called from setup_arch.  Detect an SMP system and which processors
+ * are present.
+ */
+void __init
+setup_smp(void)
+{
+	struct percpu_struct *cpubase, *cpu;
+	unsigned long i;
+
+	if (boot_cpuid != 0) {
+		printk(KERN_WARNING "SMP: Booting off cpu %d instead of 0?\n",
+		       boot_cpuid);
+	}
+
+	if (hwrpb->nr_processors > 1) {
+		int boot_cpu_palrev;
+
+		DBGS(("setup_smp: nr_processors %ld\n",
+		      hwrpb->nr_processors));
+
+		cpubase = (struct percpu_struct *)
+			((char*)hwrpb + hwrpb->processor_offset);
+		boot_cpu_palrev = cpubase->pal_revision;
+
+		for (i = 0; i < hwrpb->nr_processors; i++) {
+			cpu = (struct percpu_struct *)
+				((char *)cpubase + i*hwrpb->processor_size);
+			if ((cpu->flags & 0x1cc) == 0x1cc) {
+				smp_num_probed++;
+				set_cpu_possible(i, true);
+				set_cpu_present(i, true);
+				cpu->pal_revision = boot_cpu_palrev;
+			}
+
+			DBGS(("setup_smp: CPU %d: flags 0x%lx type 0x%lx\n",
+			      i, cpu->flags, cpu->type));
+			DBGS(("setup_smp: CPU %d: PAL rev 0x%lx\n",
+			      i, cpu->pal_revision));
+		}
+	} else {
+		smp_num_probed = 1;
+	}
+
+	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
+	       smp_num_probed, cpumask_bits(cpu_present_mask)[0]);
+}
+
+/*
+ * Called by smp_init prepare the secondaries
+ */
+void __init
+smp_prepare_cpus(unsigned int max_cpus)
+{
+	/* Take care of some initial bookkeeping.  */
+	memset(ipi_data, 0, sizeof(ipi_data));
+
+	current_thread_info()->cpu = boot_cpuid;
+
+	smp_store_cpu_info(boot_cpuid);
+	smp_setup_percpu_timer(boot_cpuid);
+
+	/* Nothing to do on a UP box, or when told not to.  */
+	if (smp_num_probed == 1 || max_cpus == 0) {
+		init_cpu_possible(cpumask_of(boot_cpuid));
+		init_cpu_present(cpumask_of(boot_cpuid));
+		printk(KERN_INFO "SMP mode deactivated.\n");
+		return;
+	}
+
+	printk(KERN_INFO "SMP starting up secondaries.\n");
+
+	smp_num_cpus = smp_num_probed;
+}
+
+void
+smp_prepare_boot_cpu(void)
+{
+}
+
+int
+__cpu_up(unsigned int cpu, struct task_struct *tidle)
+{
+	smp_boot_one_cpu(cpu, tidle);
+
+	return cpu_online(cpu) ? 0 : -ENOSYS;
+}
+
+void __init
+smp_cpus_done(unsigned int max_cpus)
+{
+	int cpu;
+	unsigned long bogosum = 0;
+
+	for(cpu = 0; cpu < NR_CPUS; cpu++) 
+		if (cpu_online(cpu))
+			bogosum += cpu_data[cpu].loops_per_jiffy;
+	
+	printk(KERN_INFO "SMP: Total of %d processors activated "
+	       "(%lu.%02lu BogoMIPS).\n",
+	       num_online_cpus(), 
+	       (bogosum + 2500) / (500000/HZ),
+	       ((bogosum + 2500) / (5000/HZ)) % 100);
+}
+
+static void
+send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
+{
+	int i;
+
+	mb();
+	for_each_cpu(i, to_whom)
+		set_bit(operation, &ipi_data[i].bits);
+
+	mb();
+	for_each_cpu(i, to_whom)
+		wripir(i);
+}
+
+void
+handle_ipi(struct pt_regs *regs)
+{
+	int this_cpu = smp_processor_id();
+	unsigned long *pending_ipis = &ipi_data[this_cpu].bits;
+	unsigned long ops;
+
+#if 0
+	DBGS(("handle_ipi: on CPU %d ops 0x%lx PC 0x%lx\n",
+	      this_cpu, *pending_ipis, regs->pc));
+#endif
+
+	mb();	/* Order interrupt and bit testing. */
+	while ((ops = xchg(pending_ipis, 0)) != 0) {
+	  mb();	/* Order bit clearing and data access. */
+	  do {
+		unsigned long which;
+
+		which = ops & -ops;
+		ops &= ~which;
+		which = __ffs(which);
+
+		switch (which) {
+		case IPI_RESCHEDULE:
+			scheduler_ipi();
+			break;
+
+		case IPI_CALL_FUNC:
+			generic_smp_call_function_interrupt();
+			break;
+
+		case IPI_CPU_STOP:
+			halt();
+
+		default:
+			printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n",
+			       this_cpu, which);
+			break;
+		}
+	  } while (ops);
+
+	  mb();	/* Order data access and bit testing. */
+	}
+
+	cpu_data[this_cpu].ipi_count++;
+
+	if (hwrpb->txrdy)
+		recv_secondary_console_msg();
+}
+
+void
+arch_smp_send_reschedule(int cpu)
+{
+#ifdef DEBUG_IPI_MSG
+	if (cpu == hard_smp_processor_id())
+		printk(KERN_WARNING
+		       "smp_send_reschedule: Sending IPI to self.\n");
+#endif
+	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
+}
+
+void
+smp_send_stop(void)
+{
+	cpumask_t to_whom;
+	cpumask_copy(&to_whom, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &to_whom);
+#ifdef DEBUG_IPI_MSG
+	if (hard_smp_processor_id() != boot_cpu_id)
+		printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n");
+#endif
+	send_ipi_message(&to_whom, IPI_CPU_STOP);
+}
+
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	send_ipi_message(mask, IPI_CALL_FUNC);
+}
+
+void arch_send_call_function_single_ipi(int cpu)
+{
+	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC);
+}
+
+static void
+ipi_imb(void *ignored)
+{
+	imb();
+}
+
+void
+smp_imb(void)
+{
+	/* Must wait other processors to flush their icache before continue. */
+	on_each_cpu(ipi_imb, NULL, 1);
+}
+EXPORT_SYMBOL(smp_imb);
+
+static void
+ipi_flush_tlb_all(void *ignored)
+{
+	tbia();
+}
+
+void
+flush_tlb_all(void)
+{
+	/* Although we don't have any data to pass, we do want to
+	   synchronize with the other processors.  */
+	on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+}
+
+#define asn_locked() (cpu_data[smp_processor_id()].asn_lock)
+
+static void
+ipi_flush_tlb_mm(void *x)
+{
+	struct mm_struct *mm = x;
+	if (mm == current->active_mm && !asn_locked())
+		flush_tlb_current(mm);
+	else
+		flush_tlb_other(mm);
+}
+
+void
+flush_tlb_mm(struct mm_struct *mm)
+{
+	preempt_disable();
+
+	if (mm == current->active_mm) {
+		flush_tlb_current(mm);
+		if (atomic_read(&mm->mm_users) <= 1) {
+			int cpu, this_cpu = smp_processor_id();
+			for (cpu = 0; cpu < NR_CPUS; cpu++) {
+				if (!cpu_online(cpu) || cpu == this_cpu)
+					continue;
+				if (mm->context[cpu])
+					mm->context[cpu] = 0;
+			}
+			preempt_enable();
+			return;
+		}
+	}
+
+	smp_call_function(ipi_flush_tlb_mm, mm, 1);
+
+	preempt_enable();
+}
+EXPORT_SYMBOL(flush_tlb_mm);
+
+struct flush_tlb_page_struct {
+	struct vm_area_struct *vma;
+	struct mm_struct *mm;
+	unsigned long addr;
+};
+
+static void
+ipi_flush_tlb_page(void *x)
+{
+	struct flush_tlb_page_struct *data = x;
+	struct mm_struct * mm = data->mm;
+
+	if (mm == current->active_mm && !asn_locked())
+		flush_tlb_current_page(mm, data->vma, data->addr);
+	else
+		flush_tlb_other(mm);
+}
+
+void
+flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	struct flush_tlb_page_struct data;
+	struct mm_struct *mm = vma->vm_mm;
+
+	preempt_disable();
+
+	if (mm == current->active_mm) {
+		flush_tlb_current_page(mm, vma, addr);
+		if (atomic_read(&mm->mm_users) <= 1) {
+			int cpu, this_cpu = smp_processor_id();
+			for (cpu = 0; cpu < NR_CPUS; cpu++) {
+				if (!cpu_online(cpu) || cpu == this_cpu)
+					continue;
+				if (mm->context[cpu])
+					mm->context[cpu] = 0;
+			}
+			preempt_enable();
+			return;
+		}
+	}
+
+	data.vma = vma;
+	data.mm = mm;
+	data.addr = addr;
+
+	smp_call_function(ipi_flush_tlb_page, &data, 1);
+
+	preempt_enable();
+}
+EXPORT_SYMBOL(flush_tlb_page);
+
+void
+flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+	/* On the Alpha we always flush the whole user tlb.  */
+	flush_tlb_mm(vma->vm_mm);
+}
+EXPORT_SYMBOL(flush_tlb_range);
+
+static void
+ipi_flush_icache_page(void *x)
+{
+	struct mm_struct *mm = (struct mm_struct *) x;
+	if (mm == current->active_mm && !asn_locked())
+		__load_new_mm_context(mm);
+	else
+		flush_tlb_other(mm);
+}
+
+void
+flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
+			unsigned long addr, int len)
+{
+	struct mm_struct *mm = vma->vm_mm;
+
+	if ((vma->vm_flags & VM_EXEC) == 0)
+		return;
+
+	preempt_disable();
+
+	if (mm == current->active_mm) {
+		__load_new_mm_context(mm);
+		if (atomic_read(&mm->mm_users) <= 1) {
+			int cpu, this_cpu = smp_processor_id();
+			for (cpu = 0; cpu < NR_CPUS; cpu++) {
+				if (!cpu_online(cpu) || cpu == this_cpu)
+					continue;
+				if (mm->context[cpu])
+					mm->context[cpu] = 0;
+			}
+			preempt_enable();
+			return;
+		}
+	}
+
+	smp_call_function(ipi_flush_icache_page, mm, 1);
+
+	preempt_enable();
+}
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
new file mode 100644
index 0000000000..217b4dca51
--- /dev/null
+++ b/arch/alpha/kernel/srm_env.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * srm_env.c - Access to SRM environment
+ *             variables through linux' procfs
+ *
+ * (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
+ *
+ * This driver is a modified version of Erik Mouw's example proc
+ * interface, so: thank you, Erik! He can be reached via email at
+ * <J.A.K.Mouw@its.tudelft.nl>. It is based on an idea
+ * provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They
+ * included a patch like this as well. Thanks for idea!
+ */
+
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <asm/console.h>
+#include <linux/uaccess.h>
+#include <asm/machvec.h>
+
+#define BASE_DIR	"srm_environment"	/* Subdir in /proc/		*/
+#define NAMED_DIR	"named_variables"	/* Subdir for known variables	*/
+#define NUMBERED_DIR	"numbered_variables"	/* Subdir for all variables	*/
+#define VERSION		"0.0.6"			/* Module version		*/
+#define NAME		"srm_env"		/* Module name			*/
+
+MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
+MODULE_DESCRIPTION("Accessing Alpha SRM environment through procfs interface");
+MODULE_LICENSE("GPL");
+
+typedef struct _srm_env {
+	char			*name;
+	unsigned long		id;
+} srm_env_t;
+
+static struct proc_dir_entry	*base_dir;
+static struct proc_dir_entry	*named_dir;
+static struct proc_dir_entry	*numbered_dir;
+
+static srm_env_t	srm_named_entries[] = {
+	{ "auto_action",	ENV_AUTO_ACTION		},
+	{ "boot_dev",		ENV_BOOT_DEV		},
+	{ "bootdef_dev",	ENV_BOOTDEF_DEV		},
+	{ "booted_dev",		ENV_BOOTED_DEV		},
+	{ "boot_file",		ENV_BOOT_FILE		},
+	{ "booted_file",	ENV_BOOTED_FILE		},
+	{ "boot_osflags",	ENV_BOOT_OSFLAGS	},
+	{ "booted_osflags",	ENV_BOOTED_OSFLAGS	},
+	{ "boot_reset",		ENV_BOOT_RESET		},
+	{ "dump_dev",		ENV_DUMP_DEV		},
+	{ "enable_audit",	ENV_ENABLE_AUDIT	},
+	{ "license",		ENV_LICENSE		},
+	{ "char_set",		ENV_CHAR_SET		},
+	{ "language",		ENV_LANGUAGE		},
+	{ "tty_dev",		ENV_TTY_DEV		},
+	{ NULL,			0			},
+};
+
+static int srm_env_proc_show(struct seq_file *m, void *v)
+{
+	unsigned long	ret;
+	unsigned long	id = (unsigned long)m->private;
+	char		*page;
+
+	page = (char *)__get_free_page(GFP_USER);
+	if (!page)
+		return -ENOMEM;
+
+	ret = callback_getenv(id, page, PAGE_SIZE);
+
+	if ((ret >> 61) == 0) {
+		seq_write(m, page, ret);
+		ret = 0;
+	} else
+		ret = -EFAULT;
+	free_page((unsigned long)page);
+	return ret;
+}
+
+static int srm_env_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, srm_env_proc_show, pde_data(inode));
+}
+
+static ssize_t srm_env_proc_write(struct file *file, const char __user *buffer,
+				  size_t count, loff_t *pos)
+{
+	int res;
+	unsigned long	id = (unsigned long)pde_data(file_inode(file));
+	char		*buf = (char *) __get_free_page(GFP_USER);
+	unsigned long	ret1, ret2;
+
+	if (!buf)
+		return -ENOMEM;
+
+	res = -EINVAL;
+	if (count >= PAGE_SIZE)
+		goto out;
+
+	res = -EFAULT;
+	if (copy_from_user(buf, buffer, count))
+		goto out;
+	buf[count] = '\0';
+
+	ret1 = callback_setenv(id, buf, count);
+	if ((ret1 >> 61) == 0) {
+		do
+			ret2 = callback_save_env();
+		while((ret2 >> 61) == 1);
+		res = (int) ret1;
+	}
+
+ out:
+	free_page((unsigned long)buf);
+	return res;
+}
+
+static const struct proc_ops srm_env_proc_ops = {
+	.proc_open	= srm_env_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= srm_env_proc_write,
+};
+
+static int __init
+srm_env_init(void)
+{
+	srm_env_t	*entry;
+	unsigned long	var_num;
+
+	/*
+	 * Check system
+	 */
+	if (!alpha_using_srm) {
+		printk(KERN_INFO "%s: This Alpha system doesn't "
+				"know about SRM (or you've booted "
+				"SRM->MILO->Linux, which gets "
+				"misdetected)...\n", __func__);
+		return -ENODEV;
+	}
+
+	/*
+	 * Create base directory
+	 */
+	base_dir = proc_mkdir(BASE_DIR, NULL);
+	if (!base_dir) {
+		printk(KERN_ERR "Couldn't create base dir /proc/%s\n",
+				BASE_DIR);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Create per-name subdirectory
+	 */
+	named_dir = proc_mkdir(NAMED_DIR, base_dir);
+	if (!named_dir) {
+		printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
+				BASE_DIR, NAMED_DIR);
+		goto cleanup;
+	}
+
+	/*
+	 * Create per-number subdirectory
+	 */
+	numbered_dir = proc_mkdir(NUMBERED_DIR, base_dir);
+	if (!numbered_dir) {
+		printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
+				BASE_DIR, NUMBERED_DIR);
+		goto cleanup;
+
+	}
+
+	/*
+	 * Create all named nodes
+	 */
+	entry = srm_named_entries;
+	while (entry->name && entry->id) {
+		if (!proc_create_data(entry->name, 0644, named_dir,
+			     &srm_env_proc_ops, (void *)entry->id))
+			goto cleanup;
+		entry++;
+	}
+
+	/*
+	 * Create all numbered nodes
+	 */
+	for (var_num = 0; var_num <= 255; var_num++) {
+		char name[4];
+		sprintf(name, "%ld", var_num);
+		if (!proc_create_data(name, 0644, numbered_dir,
+			     &srm_env_proc_ops, (void *)var_num))
+			goto cleanup;
+	}
+
+	printk(KERN_INFO "%s: version %s loaded successfully\n", NAME,
+			VERSION);
+
+	return 0;
+
+cleanup:
+	remove_proc_subtree(BASE_DIR, NULL);
+	return -ENOMEM;
+}
+
+static void __exit
+srm_env_exit(void)
+{
+	remove_proc_subtree(BASE_DIR, NULL);
+	printk(KERN_INFO "%s: unloaded successfully\n", NAME);
+}
+
+module_init(srm_env_init);
+module_exit(srm_env_exit);
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
new file mode 100644
index 0000000000..d6139dbae4
--- /dev/null
+++ b/arch/alpha/kernel/srmcons.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/srmcons.c
+ *
+ * Callback based driver for SRM Console console device.
+ * (TTY driver and console driver)
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+
+#include <asm/console.h>
+#include <linux/uaccess.h>
+
+
+static DEFINE_SPINLOCK(srmcons_callback_lock);
+static int srm_is_registered_console = 0;
+
+/* 
+ * The TTY driver
+ */
+#define MAX_SRM_CONSOLE_DEVICES 1	/* only support 1 console device */
+
+struct srmcons_private {
+	struct tty_port port;
+	struct timer_list timer;
+} srmcons_singleton;
+
+typedef union _srmcons_result {
+	struct {
+		unsigned long c :61;
+		unsigned long status :3;
+	} bits;
+	long as_long;
+} srmcons_result;
+
+/* called with callback_lock held */
+static int
+srmcons_do_receive_chars(struct tty_port *port)
+{
+	srmcons_result result;
+	int count = 0, loops = 0;
+
+	do {
+		result.as_long = callback_getc(0);
+		if (result.bits.status < 2) {
+			tty_insert_flip_char(port, (char)result.bits.c, 0);
+			count++;
+		}
+	} while((result.bits.status & 1) && (++loops < 10));
+
+	if (count)
+		tty_flip_buffer_push(port);
+
+	return count;
+}
+
+static void
+srmcons_receive_chars(struct timer_list *t)
+{
+	struct srmcons_private *srmconsp = from_timer(srmconsp, t, timer);
+	struct tty_port *port = &srmconsp->port;
+	unsigned long flags;
+	int incr = 10;
+
+	local_irq_save(flags);
+	if (spin_trylock(&srmcons_callback_lock)) {
+		if (!srmcons_do_receive_chars(port))
+			incr = 100;
+		spin_unlock(&srmcons_callback_lock);
+	} 
+
+	spin_lock(&port->lock);
+	if (port->tty)
+		mod_timer(&srmconsp->timer, jiffies + incr);
+	spin_unlock(&port->lock);
+
+	local_irq_restore(flags);
+}
+
+/* called with callback_lock held */
+static int
+srmcons_do_write(struct tty_port *port, const char *buf, int count)
+{
+	static char str_cr[1] = "\r";
+	long c, remaining = count;
+	srmcons_result result;
+	char *cur;
+	int need_cr;
+
+	for (cur = (char *)buf; remaining > 0; ) {
+		need_cr = 0;
+		/* 
+		 * Break it up into reasonable size chunks to allow a chance
+		 * for input to get in
+		 */
+		for (c = 0; c < min_t(long, 128L, remaining) && !need_cr; c++)
+			if (cur[c] == '\n')
+				need_cr = 1;
+		
+		while (c > 0) {
+			result.as_long = callback_puts(0, cur, c);
+			c -= result.bits.c;
+			remaining -= result.bits.c;
+			cur += result.bits.c;
+
+			/*
+			 * Check for pending input iff a tty port was provided
+			 */
+			if (port)
+				srmcons_do_receive_chars(port);
+		}
+
+		while (need_cr) {
+			result.as_long = callback_puts(0, str_cr, 1);
+			if (result.bits.c > 0)
+				need_cr = 0;
+		}
+	}
+	return count;
+}
+
+static ssize_t
+srmcons_write(struct tty_struct *tty, const u8 *buf, size_t count)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&srmcons_callback_lock, flags);
+	srmcons_do_write(tty->port, (const char *) buf, count);
+	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
+
+	return count;
+}
+
+static unsigned int
+srmcons_write_room(struct tty_struct *tty)
+{
+	return 512;
+}
+
+static int
+srmcons_open(struct tty_struct *tty, struct file *filp)
+{
+	struct srmcons_private *srmconsp = &srmcons_singleton;
+	struct tty_port *port = &srmconsp->port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	if (!port->tty) {
+		tty->driver_data = srmconsp;
+		tty->port = port;
+		port->tty = tty; /* XXX proper refcounting */
+		mod_timer(&srmconsp->timer, jiffies + 10);
+	}
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void
+srmcons_close(struct tty_struct *tty, struct file *filp)
+{
+	struct srmcons_private *srmconsp = tty->driver_data;
+	struct tty_port *port = &srmconsp->port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	if (tty->count == 1) {
+		port->tty = NULL;
+		del_timer(&srmconsp->timer);
+	}
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+
+static struct tty_driver *srmcons_driver;
+
+static const struct tty_operations srmcons_ops = {
+	.open		= srmcons_open,
+	.close		= srmcons_close,
+	.write		= srmcons_write,
+	.write_room	= srmcons_write_room,
+};
+
+static int __init
+srmcons_init(void)
+{
+	timer_setup(&srmcons_singleton.timer, srmcons_receive_chars, 0);
+	if (srm_is_registered_console) {
+		struct tty_driver *driver;
+		int err;
+
+		driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
+		if (IS_ERR(driver))
+			return PTR_ERR(driver);
+
+		tty_port_init(&srmcons_singleton.port);
+
+		driver->driver_name = "srm";
+		driver->name = "srm";
+		driver->major = 0; 	/* dynamic */
+		driver->minor_start = 0;
+		driver->type = TTY_DRIVER_TYPE_SYSTEM;
+		driver->subtype = SYSTEM_TYPE_SYSCONS;
+		driver->init_termios = tty_std_termios;
+		tty_set_operations(driver, &srmcons_ops);
+		tty_port_link_device(&srmcons_singleton.port, driver, 0);
+		err = tty_register_driver(driver);
+		if (err) {
+			tty_driver_kref_put(driver);
+			tty_port_destroy(&srmcons_singleton.port);
+			return err;
+		}
+		srmcons_driver = driver;
+	}
+
+	return -ENODEV;
+}
+device_initcall(srmcons_init);
+
+
+/*
+ * The console driver
+ */
+static void
+srm_console_write(struct console *co, const char *s, unsigned count)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&srmcons_callback_lock, flags);
+	srmcons_do_write(NULL, s, count);
+	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
+}
+
+static struct tty_driver *
+srm_console_device(struct console *co, int *index)
+{
+	*index = co->index;
+	return srmcons_driver;
+}
+
+static int
+srm_console_setup(struct console *co, char *options)
+{
+	return 0;
+}
+
+static struct console srmcons = {
+	.name		= "srm",
+	.write		= srm_console_write,
+	.device		= srm_console_device,
+	.setup		= srm_console_setup,
+	.flags		= CON_PRINTBUFFER | CON_BOOT,
+	.index		= -1,
+};
+
+void __init
+register_srm_console(void)
+{
+	if (!srm_is_registered_console) {
+		callback_open_console();
+		register_console(&srmcons);
+		srm_is_registered_console = 1;
+	}
+}
+
+void __init
+unregister_srm_console(void)
+{
+	if (srm_is_registered_console) {
+		callback_close_console();
+		unregister_console(&srmcons);
+		srm_is_registered_console = 0;
+	}
+}
diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
new file mode 100644
index 0000000000..e063b3857b
--- /dev/null
+++ b/arch/alpha/kernel/sys_alcor.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_alcor.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the ALCOR and XLT (XL-300/366/433).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/mmu_context.h>
+#include <asm/irq.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for ENABLED irqs.  */
+static unsigned long cached_irq_mask;
+
+static inline void
+alcor_update_irq_hw(unsigned long mask)
+{
+	*(vuip)GRU_INT_MASK = mask;
+	mb();
+}
+
+static inline void
+alcor_enable_irq(struct irq_data *d)
+{
+	alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
+}
+
+static void
+alcor_disable_irq(struct irq_data *d)
+{
+	alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
+}
+
+static void
+alcor_mask_and_ack_irq(struct irq_data *d)
+{
+	alcor_disable_irq(d);
+
+	/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
+	*(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb();
+	*(vuip)GRU_INT_CLEAR = 0; mb();
+}
+
+static void
+alcor_isa_mask_and_ack_irq(struct irq_data *d)
+{
+	i8259a_mask_and_ack_irq(d);
+
+	/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
+	*(vuip)GRU_INT_CLEAR = 0x80000000; mb();
+	*(vuip)GRU_INT_CLEAR = 0; mb();
+}
+
+static struct irq_chip alcor_irq_type = {
+	.name		= "ALCOR",
+	.irq_unmask	= alcor_enable_irq,
+	.irq_mask	= alcor_disable_irq,
+	.irq_mask_ack	= alcor_mask_and_ack_irq,
+};
+
+static void
+alcor_device_interrupt(unsigned long vector)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary register of the GRU */
+	pld = (*(vuip)GRU_INT_REQ) & GRU_INT_REQ_BITS;
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1; /* clear least bit set */
+		if (i == 31) {
+			isa_device_interrupt(vector);
+		} else {
+			handle_irq(16 + i);
+		}
+	}
+}
+
+static void __init
+alcor_init_irq(void)
+{
+	long i;
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = srm_device_interrupt;
+
+	*(vuip)GRU_INT_MASK  = 0; mb();			/* all disabled */
+	*(vuip)GRU_INT_EDGE  = 0; mb();			/* all are level */
+	*(vuip)GRU_INT_HILO  = 0x80000000U; mb();	/* ISA only HI */
+	*(vuip)GRU_INT_CLEAR = 0; mb();			/* all clear */
+
+	for (i = 16; i < 48; ++i) {
+		/* On Alcor, at least, lines 20..30 are not connected
+		   and can generate spurious interrupts if we turn them
+		   on while IRQ probing.  */
+		if (i >= 16+20 && i <= 16+30)
+			continue;
+		irq_set_chip_and_handler(i, &alcor_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+	i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq;
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+
+	if (request_irq(16 + 31, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ GRU_INT_REQ:
+ * Bit      Meaning
+ * 0        Interrupt Line A from slot 2
+ * 1        Interrupt Line B from slot 2
+ * 2        Interrupt Line C from slot 2
+ * 3        Interrupt Line D from slot 2
+ * 4        Interrupt Line A from slot 1
+ * 5        Interrupt line B from slot 1
+ * 6        Interrupt Line C from slot 1
+ * 7        Interrupt Line D from slot 1
+ * 8        Interrupt Line A from slot 0
+ * 9        Interrupt Line B from slot 0
+ *10        Interrupt Line C from slot 0
+ *11        Interrupt Line D from slot 0
+ *12        Interrupt Line A from slot 4
+ *13        Interrupt Line B from slot 4
+ *14        Interrupt Line C from slot 4
+ *15        Interrupt Line D from slot 4
+ *16        Interrupt Line D from slot 3
+ *17        Interrupt Line D from slot 3
+ *18        Interrupt Line D from slot 3
+ *19        Interrupt Line D from slot 3
+ *20-30     Reserved
+ *31        EISA interrupt
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  6       built-in TULIP (XLT only)
+ *  7       PCI on board slot 0
+ *  8       PCI on board slot 3
+ *  9       PCI on board slot 4
+ * 10       PCEB (PCI-EISA bridge)
+ * 11       PCI on board slot 2
+ * 12       PCI on board slot 1
+ *   
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and 
+ * above for PCI interrupts.  The IRQ relates to which bit the interrupt
+ * comes in on.  This makes interrupt processing much easier.
+ */
+
+static int
+alcor_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[7][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		/* note: IDSEL 17 is XLT only */
+		{16+13, 16+13, 16+13, 16+13, 16+13},	/* IdSel 17,  TULIP  */
+		{ 16+8,  16+8,  16+9, 16+10, 16+11},	/* IdSel 18,  slot 0 */
+		{16+16, 16+16, 16+17, 16+18, 16+19},	/* IdSel 19,  slot 3 */
+		{16+12, 16+12, 16+13, 16+14, 16+15},	/* IdSel 20,  slot 4 */
+		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 21,  PCEB   */
+		{ 16+0,  16+0,  16+1,  16+2,  16+3},	/* IdSel 22,  slot 2 */
+		{ 16+4,  16+4,  16+5,  16+6,  16+7},	/* IdSel 23,  slot 1 */
+	};
+	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static void
+alcor_kill_arch(int mode)
+{
+	cia_kill_arch(mode);
+
+#ifndef ALPHA_RESTORE_SRM_SETUP
+	switch(mode) {
+	case LINUX_REBOOT_CMD_RESTART:
+		/* Who said DEC engineer's have no sense of humor? ;-)  */
+		if (alpha_using_srm) {
+			*(vuip) GRU_RESET = 0x0000dead;
+			mb();
+		}
+		break;
+	case LINUX_REBOOT_CMD_HALT:
+		break;
+	case LINUX_REBOOT_CMD_POWER_OFF:
+		break;
+	}
+
+	halt();
+#endif
+}
+
+static void __init
+alcor_init_pci(void)
+{
+	struct pci_dev *dev;
+
+	cia_init_pci();
+
+	/*
+	 * Now we can look to see if we are really running on an XLT-type
+	 * motherboard, by looking for a 21040 TULIP in slot 6, which is
+	 * built into XLT and BRET/MAVERICK, but not available on ALCOR.
+	 */
+	dev = pci_get_device(PCI_VENDOR_ID_DEC,
+			      PCI_DEVICE_ID_DEC_TULIP,
+			      NULL);
+	if (dev && dev->devfn == PCI_DEVFN(6,0)) {
+		alpha_mv.sys.cia.gru_int_req_bits = XLT_GRU_INT_REQ_BITS; 
+		printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n",
+		       __func__);
+	}
+	pci_dev_put(dev);
+}
+
+
+/*
+ * The System Vectors
+ */
+
+struct alpha_machine_vector alcor_mv __initmv = {
+	.vector_name		= "Alcor",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= alcor_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= alcor_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= alcor_init_pci,
+	.kill_arch		= alcor_kill_arch,
+	.pci_map_irq		= alcor_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .cia = {
+		.gru_int_req_bits = ALCOR_GRU_INT_REQ_BITS
+	}}
+};
+ALIAS_MV(alcor)
+
+struct alpha_machine_vector xlt_mv __initmv = {
+	.vector_name		= "XLT",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= alcor_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= alcor_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= alcor_init_pci,
+	.kill_arch		= alcor_kill_arch,
+	.pci_map_irq		= alcor_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .cia = {
+		.gru_int_req_bits = XLT_GRU_INT_REQ_BITS
+	}}
+};
+
+/* No alpha_mv alias for XLT, since we compile it in unconditionally
+   with ALCOR; setup_arch knows how to cope.  */
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
new file mode 100644
index 0000000000..47459b73cd
--- /dev/null
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_cabriolet.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999, 2000 Richard Henderson
+ *
+ * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
+ * PC164 and LX164.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_apecs.h>
+#include <asm/core_cia.h>
+#include <asm/core_lca.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+#include "pc873xx.h"
+
+/* Note mask bit is true for DISABLED irqs.  */
+static unsigned long cached_irq_mask = ~0UL;
+
+static inline void
+cabriolet_update_irq_hw(unsigned int irq, unsigned long mask)
+{
+	int ofs = (irq - 16) / 8;
+	outb(mask >> (16 + ofs * 8), 0x804 + ofs);
+}
+
+static inline void
+cabriolet_enable_irq(struct irq_data *d)
+{
+	cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq));
+}
+
+static void
+cabriolet_disable_irq(struct irq_data *d)
+{
+	cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq);
+}
+
+static struct irq_chip cabriolet_irq_type = {
+	.name		= "CABRIOLET",
+	.irq_unmask	= cabriolet_enable_irq,
+	.irq_mask	= cabriolet_disable_irq,
+	.irq_mask_ack	= cabriolet_disable_irq,
+};
+
+static void 
+cabriolet_device_interrupt(unsigned long v)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary registers */
+	pld = inb(0x804) | (inb(0x805) << 8) | (inb(0x806) << 16);
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1;	/* clear least bit set */
+		if (i == 4) {
+			isa_device_interrupt(v);
+		} else {
+			handle_irq(16 + i);
+		}
+	}
+}
+
+static void __init
+common_init_irq(void (*srm_dev_int)(unsigned long v))
+{
+	init_i8259a_irqs();
+
+	if (alpha_using_srm) {
+		alpha_mv.device_interrupt = srm_dev_int;
+		init_srm_irqs(35, 0);
+	}
+	else {
+		long i;
+
+		outb(0xff, 0x804);
+		outb(0xff, 0x805);
+		outb(0xff, 0x806);
+
+		for (i = 16; i < 35; ++i) {
+			irq_set_chip_and_handler(i, &cabriolet_irq_type,
+						 handle_level_irq);
+			irq_set_status_flags(i, IRQ_LEVEL);
+		}
+	}
+
+	common_init_isa_dma();
+	if (request_irq(16 + 4, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
+}
+
+#ifndef CONFIG_ALPHA_PC164
+static void __init
+cabriolet_init_irq(void)
+{
+	common_init_irq(srm_device_interrupt);
+}
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164)
+/* In theory, the PC164 has the same interrupt hardware as the other
+   Cabriolet based systems.  However, something got screwed up late
+   in the development cycle which broke the interrupt masking hardware.
+   Repeat, it is not possible to mask and ack interrupts.  At all.
+
+   In an attempt to work around this, while processing interrupts,
+   we do not allow the IPL to drop below what it is currently.  This
+   prevents the possibility of recursion.  
+
+   ??? Another option might be to force all PCI devices to use edge
+   triggered rather than level triggered interrupts.  That might be
+   too invasive though.  */
+
+static void
+pc164_srm_device_interrupt(unsigned long v)
+{
+	__min_ipl = getipl();
+	srm_device_interrupt(v);
+	__min_ipl = 0;
+}
+
+static void
+pc164_device_interrupt(unsigned long v)
+{
+	__min_ipl = getipl();
+	cabriolet_device_interrupt(v);
+	__min_ipl = 0;
+}
+
+static void __init
+pc164_init_irq(void)
+{
+	common_init_irq(pc164_srm_device_interrupt);
+}
+#endif
+
+/*
+ * The EB66+ is very similar to the EB66 except that it does not have
+ * the on-board NCR and Tulip chips.  In the code below, I have used
+ * slot number to refer to the id select line and *not* the slot
+ * number used in the EB66+ documentation.  However, in the table,
+ * I've given the slot number, the id select line and the Jxx number
+ * that's printed on the board.  The interrupt pins from the PCI slots
+ * are wired into 3 interrupt summary registers at 0x804, 0x805 and
+ * 0x806 ISA.
+ *
+ * In the table, -1 means don't assign an IRQ number.  This is usually
+ * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
+ */
+
+static inline int
+eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[5][5] = {
+		/*INT  INTA  INTB  INTC   INTD */
+		{16+0, 16+0, 16+5,  16+9, 16+13},  /* IdSel 6,  slot 0, J25 */
+		{16+1, 16+1, 16+6, 16+10, 16+14},  /* IdSel 7,  slot 1, J26 */
+		{  -1,   -1,   -1,    -1,    -1},  /* IdSel 8,  SIO         */
+		{16+2, 16+2, 16+7, 16+11, 16+15},  /* IdSel 9,  slot 2, J27 */
+		{16+3, 16+3, 16+8, 16+12,  16+6}   /* IdSel 10, slot 3, J28 */
+	};
+	const long min_idsel = 6, max_idsel = 10, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+
+/*
+ * The AlphaPC64 is very similar to the EB66+ except that its slots
+ * are numbered differently.  In the code below, I have used slot
+ * number to refer to the id select line and *not* the slot number
+ * used in the AlphaPC64 documentation.  However, in the table, I've
+ * given the slot number, the id select line and the Jxx number that's
+ * printed on the board.  The interrupt pins from the PCI slots are
+ * wired into 3 interrupt summary registers at 0x804, 0x805 and 0x806
+ * ISA.
+ *
+ * In the table, -1 means don't assign an IRQ number.  This is usually
+ * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
+ */
+
+static inline int
+cabriolet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[5][5] = {
+		/*INT   INTA  INTB  INTC   INTD */
+		{ 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5,  slot 2, J21 */
+		{ 16+0, 16+0, 16+5,  16+9, 16+13}, /* IdSel 6,  slot 0, J19 */
+		{ 16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7,  slot 1, J20 */
+		{   -1,   -1,   -1,    -1,    -1}, /* IdSel 8,  SIO         */
+		{ 16+3, 16+3, 16+8, 16+12, 16+16}  /* IdSel 9,  slot 3, J22 */
+	};
+	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static inline void __init
+cabriolet_enable_ide(void)
+{
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	 } else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		pc873xx_enable_ide();
+	}
+}
+
+static inline void __init
+cabriolet_init_pci(void)
+{
+	common_init_pci();
+	cabriolet_enable_ide();
+}
+
+static inline void __init
+cia_cab_init_pci(void)
+{
+	cia_init_pci();
+	cabriolet_enable_ide();
+}
+
+/*
+ * The PC164 and LX164 have 19 PCI interrupts, four from each of the four
+ * PCI slots, the SIO, PCI/IDE, and USB.
+ * 
+ * Each of the interrupts can be individually masked. This is
+ * accomplished by setting the appropriate bit in the mask register.
+ * A bit is set by writing a "1" to the desired position in the mask
+ * register and cleared by writing a "0". There are 3 mask registers
+ * located at ISA address 804h, 805h and 806h.
+ * 
+ * An I/O read at ISA address 804h, 805h, 806h will return the
+ * state of the 11 PCI interrupts and not the state of the MASKED
+ * interrupts.
+ * 
+ * Note: A write to I/O 804h, 805h, and 806h the mask register will be
+ * updated.
+ * 
+ * 
+ * 				ISA DATA<7:0>
+ * ISA     +--------------------------------------------------------------+
+ * ADDRESS |   7   |   6   |   5   |   4   |   3   |   2  |   1   |   0   |
+ *         +==============================================================+
+ * 0x804   | INTB0 |  USB  |  IDE  |  SIO  | INTA3 |INTA2 | INTA1 | INTA0 |
+ *         +--------------------------------------------------------------+
+ * 0x805   | INTD0 | INTC3 | INTC2 | INTC1 | INTC0 |INTB3 | INTB2 | INTB1 |
+ *         +--------------------------------------------------------------+
+ * 0x806   | Rsrv  | Rsrv  | Rsrv  | Rsrv  | Rsrv  |INTD3 | INTD2 | INTD1 |
+ *         +--------------------------------------------------------------+
+ *         * Rsrv = reserved bits
+ *         Note: The mask register is write-only.
+ * 
+ * IdSel	
+ *   5	 32 bit PCI option slot 2
+ *   6	 64 bit PCI option slot 0
+ *   7	 64 bit PCI option slot 1
+ *   8	 Saturn I/O
+ *   9	 32 bit PCI option slot 3
+ *  10	 USB
+ *  11	 IDE
+ * 
+ */
+
+static inline int
+alphapc164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[7][5] = {
+		/*INT   INTA  INTB   INTC   INTD */
+		{ 16+2, 16+2, 16+9,  16+13, 16+17}, /* IdSel  5, slot 2, J20 */
+		{ 16+0, 16+0, 16+7,  16+11, 16+15}, /* IdSel  6, slot 0, J29 */
+		{ 16+1, 16+1, 16+8,  16+12, 16+16}, /* IdSel  7, slot 1, J26 */
+		{   -1,   -1,   -1,    -1,    -1},  /* IdSel  8, SIO */
+		{ 16+3, 16+3, 16+10, 16+14, 16+18}, /* IdSel  9, slot 3, J19 */
+		{ 16+6, 16+6, 16+6,  16+6,  16+6},  /* IdSel 10, USB */
+		{ 16+5, 16+5, 16+5,  16+5,  16+5}   /* IdSel 11, IDE */
+	};
+	const long min_idsel = 5, max_idsel = 11, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static inline void __init
+alphapc164_init_pci(void)
+{
+	cia_init_pci();
+	SMC93x_Init();
+}
+
+
+/*
+ * The System Vector
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
+struct alpha_machine_vector cabriolet_mv __initmv = {
+	.vector_name		= "Cabriolet",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= cabriolet_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= cabriolet_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cabriolet_init_pci,
+	.pci_map_irq		= cabriolet_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+#ifndef CONFIG_ALPHA_EB64P
+ALIAS_MV(cabriolet)
+#endif
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
+struct alpha_machine_vector eb164_mv __initmv = {
+	.vector_name		= "EB164",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= cabriolet_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= cabriolet_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cia_cab_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= cabriolet_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(eb164)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
+struct alpha_machine_vector eb66p_mv __initmv = {
+	.vector_name		= "EB66+",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= cabriolet_device_interrupt,
+
+	.init_arch		= lca_init_arch,
+	.init_irq		= cabriolet_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cabriolet_init_pci,
+	.pci_map_irq		= eb66p_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(eb66p)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
+struct alpha_machine_vector lx164_mv __initmv = {
+	.vector_name		= "LX164",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_PYXIS_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= PYXIS_DAC_OFFSET,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= cabriolet_device_interrupt,
+
+	.init_arch		= pyxis_init_arch,
+	.init_irq		= cabriolet_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= alphapc164_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= alphapc164_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(lx164)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164)
+struct alpha_machine_vector pc164_mv __initmv = {
+	.vector_name		= "PC164",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 35,
+	.device_interrupt	= pc164_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= pc164_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= alphapc164_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= alphapc164_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(pc164)
+#endif
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
new file mode 100644
index 0000000000..9fb445d7dc
--- /dev/null
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -0,0 +1,665 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_dp264.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996, 1999 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ *	Modified by Christopher C. Chimelis, 2001 to
+ *	add support for the addition of Shark to the
+ *	Tsunami family.
+ *
+ * Code supporting the DP264 (EV6+TSUNAMI).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_tsunami.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for ENABLED irqs.  */
+static unsigned long cached_irq_mask;
+/* dp264 boards handle at max four CPUs */
+static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL };
+
+DEFINE_SPINLOCK(dp264_irq_lock);
+
+static void
+tsunami_update_irq_hw(unsigned long mask)
+{
+	register tsunami_cchip *cchip = TSUNAMI_cchip;
+	unsigned long isa_enable = 1UL << 55;
+	register int bcpu = boot_cpuid;
+
+#ifdef CONFIG_SMP
+	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
+	unsigned long mask0, mask1, mask2, mask3, dummy;
+
+	mask &= ~isa_enable;
+	mask0 = mask & cpu_irq_affinity[0];
+	mask1 = mask & cpu_irq_affinity[1];
+	mask2 = mask & cpu_irq_affinity[2];
+	mask3 = mask & cpu_irq_affinity[3];
+
+	if (bcpu == 0) mask0 |= isa_enable;
+	else if (bcpu == 1) mask1 |= isa_enable;
+	else if (bcpu == 2) mask2 |= isa_enable;
+	else mask3 |= isa_enable;
+
+	dim0 = &cchip->dim0.csr;
+	dim1 = &cchip->dim1.csr;
+	dim2 = &cchip->dim2.csr;
+	dim3 = &cchip->dim3.csr;
+	if (!cpu_possible(0)) dim0 = &dummy;
+	if (!cpu_possible(1)) dim1 = &dummy;
+	if (!cpu_possible(2)) dim2 = &dummy;
+	if (!cpu_possible(3)) dim3 = &dummy;
+
+	*dim0 = mask0;
+	*dim1 = mask1;
+	*dim2 = mask2;
+	*dim3 = mask3;
+	mb();
+	*dim0;
+	*dim1;
+	*dim2;
+	*dim3;
+#else
+	volatile unsigned long *dimB;
+	if (bcpu == 0) dimB = &cchip->dim0.csr;
+	else if (bcpu == 1) dimB = &cchip->dim1.csr;
+	else if (bcpu == 2) dimB = &cchip->dim2.csr;
+	else dimB = &cchip->dim3.csr;
+
+	*dimB = mask | isa_enable;
+	mb();
+	*dimB;
+#endif
+}
+
+static void
+dp264_enable_irq(struct irq_data *d)
+{
+	spin_lock(&dp264_irq_lock);
+	cached_irq_mask |= 1UL << d->irq;
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static void
+dp264_disable_irq(struct irq_data *d)
+{
+	spin_lock(&dp264_irq_lock);
+	cached_irq_mask &= ~(1UL << d->irq);
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static void
+clipper_enable_irq(struct irq_data *d)
+{
+	spin_lock(&dp264_irq_lock);
+	cached_irq_mask |= 1UL << (d->irq - 16);
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static void
+clipper_disable_irq(struct irq_data *d)
+{
+	spin_lock(&dp264_irq_lock);
+	cached_irq_mask &= ~(1UL << (d->irq - 16));
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+}
+
+static void
+cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < 4; cpu++) {
+		unsigned long aff = cpu_irq_affinity[cpu];
+		if (cpumask_test_cpu(cpu, &affinity))
+			aff |= 1UL << irq;
+		else
+			aff &= ~(1UL << irq);
+		cpu_irq_affinity[cpu] = aff;
+	}
+}
+
+static int
+dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
+		   bool force)
+{
+	spin_lock(&dp264_irq_lock);
+	cpu_set_irq_affinity(d->irq, *affinity);
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+
+	return 0;
+}
+
+static int
+clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
+		     bool force)
+{
+	spin_lock(&dp264_irq_lock);
+	cpu_set_irq_affinity(d->irq - 16, *affinity);
+	tsunami_update_irq_hw(cached_irq_mask);
+	spin_unlock(&dp264_irq_lock);
+
+	return 0;
+}
+
+static struct irq_chip dp264_irq_type = {
+	.name			= "DP264",
+	.irq_unmask		= dp264_enable_irq,
+	.irq_mask		= dp264_disable_irq,
+	.irq_mask_ack		= dp264_disable_irq,
+	.irq_set_affinity	= dp264_set_affinity,
+};
+
+static struct irq_chip clipper_irq_type = {
+	.name			= "CLIPPER",
+	.irq_unmask		= clipper_enable_irq,
+	.irq_mask		= clipper_disable_irq,
+	.irq_mask_ack		= clipper_disable_irq,
+	.irq_set_affinity	= clipper_set_affinity,
+};
+
+static void
+dp264_device_interrupt(unsigned long vector)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary register of TSUNAMI */
+	pld = TSUNAMI_cchip->dir0.csr;
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1; /* clear least bit set */
+		if (i == 55)
+			isa_device_interrupt(vector);
+		else
+			handle_irq(16 + i);
+	}
+}
+
+static void 
+dp264_srm_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+	/*
+	 * The SRM console reports PCI interrupts with a vector calculated by:
+	 *
+	 *	0x900 + (0x10 * DRIR-bit)
+	 *
+	 * So bit 16 shows up as IRQ 32, etc.
+	 * 
+	 * On DP264/BRICK/MONET, we adjust it down by 16 because at least
+	 * that many of the low order bits of the DRIR are not used, and
+	 * so we don't count them.
+	 */
+	if (irq >= 32)
+		irq -= 16;
+
+	handle_irq(irq);
+}
+
+static void 
+clipper_srm_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+/*
+	 * The SRM console reports PCI interrupts with a vector calculated by:
+	 *
+	 *	0x900 + (0x10 * DRIR-bit)
+	 *
+	 * So bit 16 shows up as IRQ 32, etc.
+	 * 
+	 * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need
+	 * to scale down the vector reported, we just use it.
+	 *
+	 * Eg IRQ 24 is DRIR bit 8, etc, etc
+	 */
+	handle_irq(irq);
+}
+
+static void __init
+init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
+{
+	long i;
+	for (i = imin; i <= imax; ++i) {
+		irq_set_chip_and_handler(i, ops, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+}
+
+static void __init
+dp264_init_irq(void)
+{
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+	outb(0, DMA2_MASK_REG);
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = dp264_srm_device_interrupt;
+
+	tsunami_update_irq_hw(0);
+
+	init_i8259a_irqs();
+	init_tsunami_irqs(&dp264_irq_type, 16, 47);
+}
+
+static void __init
+clipper_init_irq(void)
+{
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+	outb(0, DMA2_MASK_REG);
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = clipper_srm_device_interrupt;
+
+	tsunami_update_irq_hw(0);
+
+	init_i8259a_irqs();
+	init_tsunami_irqs(&clipper_irq_type, 24, 63);
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ TSUNAMI_CSR_DIM0:
+ * Bit      Meaning
+ * 0-17     Unused
+ *18        Interrupt SCSI B (Adaptec 7895 builtin)
+ *19        Interrupt SCSI A (Adaptec 7895 builtin)
+ *20        Interrupt Line D from slot 2 PCI0
+ *21        Interrupt Line C from slot 2 PCI0
+ *22        Interrupt Line B from slot 2 PCI0
+ *23        Interrupt Line A from slot 2 PCI0
+ *24        Interrupt Line D from slot 1 PCI0
+ *25        Interrupt Line C from slot 1 PCI0
+ *26        Interrupt Line B from slot 1 PCI0
+ *27        Interrupt Line A from slot 1 PCI0
+ *28        Interrupt Line D from slot 0 PCI0
+ *29        Interrupt Line C from slot 0 PCI0
+ *30        Interrupt Line B from slot 0 PCI0
+ *31        Interrupt Line A from slot 0 PCI0
+ *
+ *32        Interrupt Line D from slot 3 PCI1
+ *33        Interrupt Line C from slot 3 PCI1
+ *34        Interrupt Line B from slot 3 PCI1
+ *35        Interrupt Line A from slot 3 PCI1
+ *36        Interrupt Line D from slot 2 PCI1
+ *37        Interrupt Line C from slot 2 PCI1
+ *38        Interrupt Line B from slot 2 PCI1
+ *39        Interrupt Line A from slot 2 PCI1
+ *40        Interrupt Line D from slot 1 PCI1
+ *41        Interrupt Line C from slot 1 PCI1
+ *42        Interrupt Line B from slot 1 PCI1
+ *43        Interrupt Line A from slot 1 PCI1
+ *44        Interrupt Line D from slot 0 PCI1
+ *45        Interrupt Line C from slot 0 PCI1
+ *46        Interrupt Line B from slot 0 PCI1
+ *47        Interrupt Line A from slot 0 PCI1
+ *48-52     Unused
+ *53        PCI0 NMI (from Cypress)
+ *54        PCI0 SMI INT (from Cypress)
+ *55        PCI0 ISA Interrupt (from Cypress)
+ *56-60     Unused
+ *61        PCI1 Bus Error
+ *62        PCI0 Bus Error
+ *63        Reserved
+ *
+ * IdSel	
+ *   5	 Cypress Bridge I/O
+ *   6	 SCSI Adaptec builtin
+ *   7	 64 bit PCI option slot 0 (all busses)
+ *   8	 64 bit PCI option slot 1 (all busses)
+ *   9	 64 bit PCI option slot 2 (all busses)
+ *  10	 64 bit PCI option slot 3 (not bus 0)
+ */
+
+static int
+isa_irq_fixup(const struct pci_dev *dev, int irq)
+{
+	u8 irq8;
+
+	if (irq > 0)
+		return irq;
+
+	/* This interrupt is routed via ISA bridge, so we'll
+	   just have to trust whatever value the console might
+	   have assigned.  */
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
+
+	return irq8 & 0xf;
+}
+
+static int
+dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[6][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 ISA Bridge */
+		{ 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
+		{ 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */
+		{ 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */
+		{ 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */
+		{ 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0}  /* IdSel 10 slot 3 */
+	};
+	const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
+	struct pci_controller *hose = dev->sysdata;
+	int irq = COMMON_TABLE_LOOKUP;
+
+	if (irq > 0)
+		irq += 16 * hose->index;
+
+	return isa_irq_fixup(dev, irq);
+}
+
+static int
+monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[13][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{    45,    45,    45,    45,    45}, /* IdSel 3 21143 PCI1 */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 4 unused */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 unused */
+		{    47,    47,    47,    47,    47}, /* IdSel 6 SCSI PCI1 */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 P2P PCI1 */
+#if 1
+		{    28,    28,    29,    30,    31}, /* IdSel 14 slot 4 PCI2*/
+		{    24,    24,    25,    26,    27}, /* IdSel 15 slot 5 PCI2*/
+#else
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 9 unused */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 10 unused */
+#endif
+		{    40,    40,    41,    42,    43}, /* IdSel 11 slot 1 PCI0*/
+		{    36,    36,    37,    38,    39}, /* IdSel 12 slot 2 PCI0*/
+		{    32,    32,    33,    34,    35}, /* IdSel 13 slot 3 PCI0*/
+		{    28,    28,    29,    30,    31}, /* IdSel 14 slot 4 PCI2*/
+		{    24,    24,    25,    26,    27}  /* IdSel 15 slot 5 PCI2*/
+	};
+	const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
+
+	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
+}
+
+static u8
+monet_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	struct pci_controller *hose = dev->sysdata;
+	int slot, pin = *pinp;
+
+	if (!dev->bus->parent) {
+		slot = PCI_SLOT(dev->devfn);
+	}
+	/* Check for the built-in bridge on hose 1. */
+	else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) {
+		slot = PCI_SLOT(dev->devfn);
+	} else {
+		/* Must be a card-based bridge.  */
+		do {
+			/* Check for built-in bridge on hose 1. */
+			if (hose->index == 1 &&
+			    PCI_SLOT(dev->bus->self->devfn) == 8) {
+				slot = PCI_SLOT(dev->devfn);
+				break;
+			}
+			pin = pci_swizzle_interrupt_pin(dev, pin);
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+static int
+webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[13][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 unused */
+		{    29,    29,    29,    29,    29}, /* IdSel 9 21143 #1 */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 10 unused */
+		{    30,    30,    30,    30,    30}, /* IdSel 11 21143 #2 */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 12 unused */
+		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 13 unused */
+		{    35,    35,    34,    33,    32}, /* IdSel 14 slot 0 */
+		{    39,    39,    38,    37,    36}, /* IdSel 15 slot 1 */
+		{    43,    43,    42,    41,    40}, /* IdSel 16 slot 2 */
+		{    47,    47,    46,    45,    44}, /* IdSel 17 slot 3 */
+	};
+	const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
+
+	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
+}
+
+static int
+clipper_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[7][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
+		{ 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */
+		{ 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */
+		{ 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */
+		{ 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */
+		{ 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */
+		{    -1,    -1,    -1,    -1,    -1}  /* IdSel 7 ISA Bridge */
+	};
+	const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
+	struct pci_controller *hose = dev->sysdata;
+	int irq = COMMON_TABLE_LOOKUP;
+
+	if (irq > 0)
+		irq += 16 * hose->index;
+
+	return isa_irq_fixup(dev, irq);
+}
+
+static void __init
+dp264_init_pci(void)
+{
+	common_init_pci();
+	SMC669_Init(0);
+	locate_and_init_vga(NULL);
+}
+
+static void __init
+monet_init_pci(void)
+{
+	common_init_pci();
+	SMC669_Init(1);
+	es1888_init();
+	locate_and_init_vga(NULL);
+}
+
+static void __init
+clipper_init_pci(void)
+{
+	common_init_pci();
+	locate_and_init_vga(NULL);
+}
+
+static void __init
+webbrick_init_arch(void)
+{
+	tsunami_init_arch();
+
+	/* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */
+	hose_head->sg_isa->align_entry = 4;
+	hose_head->sg_pci->align_entry = 4;
+}
+
+
+/*
+ * The System Vectors
+ */
+
+struct alpha_machine_vector dp264_mv __initmv = {
+	.vector_name		= "DP264",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= dp264_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= dp264_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= dp264_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(dp264)
+
+struct alpha_machine_vector monet_mv __initmv = {
+	.vector_name		= "Monet",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= dp264_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= monet_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= monet_map_irq,
+	.pci_swizzle		= monet_swizzle,
+};
+
+struct alpha_machine_vector webbrick_mv __initmv = {
+	.vector_name		= "Webbrick",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= webbrick_init_arch,
+	.init_irq		= dp264_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= webbrick_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+
+struct alpha_machine_vector clipper_mv __initmv = {
+	.vector_name		= "Clipper",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= clipper_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= clipper_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= clipper_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+
+/* Sharks strongly resemble Clipper, at least as far
+ * as interrupt routing, etc, so we're using the
+ * same functions as Clipper does
+ */
+
+struct alpha_machine_vector shark_mv __initmv = {
+	.vector_name		= "Shark",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= dp264_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= clipper_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= clipper_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+
+/* No alpha_mv alias for webbrick/monet/clipper, since we compile them
+   in unconditionally with DP264; setup_arch knows how to cope.  */
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
new file mode 100644
index 0000000000..3c43fd3475
--- /dev/null
+++ b/arch/alpha/kernel/sys_eb64p.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_eb64p.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the EB64+ and EB66.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_apecs.h>
+#include <asm/core_lca.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for DISABLED irqs.  */
+static unsigned int cached_irq_mask = -1;
+
+static inline void
+eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
+{
+	outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
+}
+
+static inline void
+eb64p_enable_irq(struct irq_data *d)
+{
+	eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
+}
+
+static void
+eb64p_disable_irq(struct irq_data *d)
+{
+	eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
+}
+
+static struct irq_chip eb64p_irq_type = {
+	.name		= "EB64P",
+	.irq_unmask	= eb64p_enable_irq,
+	.irq_mask	= eb64p_disable_irq,
+	.irq_mask_ack	= eb64p_disable_irq,
+};
+
+static void 
+eb64p_device_interrupt(unsigned long vector)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary registers */
+	pld = inb(0x26) | (inb(0x27) << 8);
+
+	/*
+	 * Now, for every possible bit set, work through
+	 * them and call the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1;	/* clear least bit set */
+
+		if (i == 5) {
+			isa_device_interrupt(vector);
+		} else {
+			handle_irq(16 + i);
+		}
+	}
+}
+
+static void __init
+eb64p_init_irq(void)
+{
+	long i;
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
+	/*
+	 * CABRIO SRM may not set variation correctly, so here we test
+	 * the high word of the interrupt summary register for the RAZ
+	 * bits, and hope that a true EB64+ would read all ones...
+	 */
+	if (inw(0x806) != 0xffff) {
+		extern struct alpha_machine_vector cabriolet_mv;
+
+		printk("Detected Cabriolet: correcting HWRPB.\n");
+
+		hwrpb->sys_variation |= 2L << 10;
+		hwrpb_update_checksum(hwrpb);
+
+		alpha_mv = cabriolet_mv;
+		alpha_mv.init_irq();
+		return;
+	}
+#endif /* GENERIC */
+
+	outb(0xff, 0x26);
+	outb(0xff, 0x27);
+
+	init_i8259a_irqs();
+
+	for (i = 16; i < 32; ++i) {
+		irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	common_init_isa_dma();
+	if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
+}
+
+/*
+ * PCI Fixup configuration.
+ *
+ * There are two 8 bit external summary registers as follows:
+ *
+ * Summary @ 0x26:
+ * Bit      Meaning
+ * 0        Interrupt Line A from slot 0
+ * 1        Interrupt Line A from slot 1
+ * 2        Interrupt Line B from slot 0
+ * 3        Interrupt Line B from slot 1
+ * 4        Interrupt Line C from slot 0
+ * 5        Interrupt line from the two ISA PICs
+ * 6        Tulip
+ * 7        NCR SCSI
+ *
+ * Summary @ 0x27
+ * Bit      Meaning
+ * 0        Interrupt Line C from slot 1
+ * 1        Interrupt Line D from slot 0
+ * 2        Interrupt Line D from slot 1
+ * 3        RAZ
+ * 4        RAZ
+ * 5        RAZ
+ * 6        RAZ
+ * 7        RAZ
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  5       NCR SCSI controller
+ *  6       PCI on board slot 0
+ *  7       PCI on board slot 1
+ *  8       Intel SIO PCI-ISA bridge chip
+ *  9       Tulip - DECchip 21040 Ethernet controller
+ *   
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and 
+ * above for PCI interrupts.  The IRQ relates to which bit the interrupt
+ * comes in on.  This makes interrupt processing much easier.
+ */
+
+static int
+eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[5][5] = {
+		/*INT  INTA  INTB  INTC   INTD */
+		{16+7, 16+7, 16+7, 16+7,  16+7},  /* IdSel 5,  slot ?, ?? */
+		{16+0, 16+0, 16+2, 16+4,  16+9},  /* IdSel 6,  slot ?, ?? */
+		{16+1, 16+1, 16+3, 16+8, 16+10},  /* IdSel 7,  slot ?, ?? */
+		{  -1,   -1,   -1,   -1,    -1},  /* IdSel 8,  SIO */
+		{16+6, 16+6, 16+6, 16+6,  16+6},  /* IdSel 9,  TULIP */
+	};
+	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+
+/*
+ * The System Vector
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
+struct alpha_machine_vector eb64p_mv __initmv = {
+	.vector_name		= "EB64+",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 32,
+	.device_interrupt	= eb64p_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= eb64p_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= NULL,
+	.pci_map_irq		= eb64p_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(eb64p)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
+struct alpha_machine_vector eb66_mv __initmv = {
+	.vector_name		= "EB66",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 32,
+	.device_interrupt	= eb64p_device_interrupt,
+
+	.init_arch		= lca_init_arch,
+	.init_irq		= eb64p_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.pci_map_irq		= eb64p_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(eb66)
+#endif
diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c
new file mode 100644
index 0000000000..aea8a54da4
--- /dev/null
+++ b/arch/alpha/kernel/sys_eiger.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_eiger.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996, 1999 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *	Copyright (C) 1999 Iain Grant
+ *
+ * Code supporting the EIGER (EV6+TSUNAMI).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_tsunami.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note that this interrupt code is identical to TAKARA.  */
+
+/* Note mask bit is true for DISABLED irqs.  */
+static unsigned long cached_irq_mask[2] = { -1, -1 };
+
+static inline void
+eiger_update_irq_hw(unsigned long irq, unsigned long mask)
+{
+	int regaddr;
+
+	mask = (irq >= 64 ? mask << 16 : mask >> ((irq - 16) & 0x30));
+	regaddr = 0x510 + (((irq - 16) >> 2) & 0x0c);
+	outl(mask & 0xffff0000UL, regaddr);
+}
+
+static inline void
+eiger_enable_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	unsigned long mask;
+	mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
+	eiger_update_irq_hw(irq, mask);
+}
+
+static void
+eiger_disable_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	unsigned long mask;
+	mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
+	eiger_update_irq_hw(irq, mask);
+}
+
+static struct irq_chip eiger_irq_type = {
+	.name		= "EIGER",
+	.irq_unmask	= eiger_enable_irq,
+	.irq_mask	= eiger_disable_irq,
+	.irq_mask_ack	= eiger_disable_irq,
+};
+
+static void
+eiger_device_interrupt(unsigned long vector)
+{
+	unsigned intstatus;
+
+	/*
+	 * The PALcode will have passed us vectors 0x800 or 0x810,
+	 * which are fairly arbitrary values and serve only to tell
+	 * us whether an interrupt has come in on IRQ0 or IRQ1. If
+	 * it's IRQ1 it's a PCI interrupt; if it's IRQ0, it's
+	 * probably ISA, but PCI interrupts can come through IRQ0
+	 * as well if the interrupt controller isn't in accelerated
+	 * mode.
+	 *
+	 * OTOH, the accelerator thing doesn't seem to be working
+	 * overly well, so what we'll do instead is try directly
+	 * examining the Master Interrupt Register to see if it's a
+	 * PCI interrupt, and if _not_ then we'll pass it on to the
+	 * ISA handler.
+	 */
+
+	intstatus = inw(0x500) & 15;
+	if (intstatus) {
+		/*
+		 * This is a PCI interrupt. Check each bit and
+		 * despatch an interrupt if it's set.
+		 */
+
+		if (intstatus & 8) handle_irq(16+3);
+		if (intstatus & 4) handle_irq(16+2);
+		if (intstatus & 2) handle_irq(16+1);
+		if (intstatus & 1) handle_irq(16+0);
+	} else {
+		isa_device_interrupt(vector);
+	}
+}
+
+static void
+eiger_srm_device_interrupt(unsigned long vector)
+{
+	int irq = (vector - 0x800) >> 4;
+	handle_irq(irq);
+}
+
+static void __init
+eiger_init_irq(void)
+{
+	long i;
+
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+	outb(0, DMA2_MASK_REG);
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = eiger_srm_device_interrupt;
+
+	for (i = 16; i < 128; i += 16)
+		eiger_update_irq_hw(i, -1);
+
+	init_i8259a_irqs();
+
+	for (i = 16; i < 128; ++i) {
+		irq_set_chip_and_handler(i, &eiger_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+}
+
+static int
+eiger_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	u8 irq_orig;
+
+	/* The SRM console has already calculated out the IRQ value's for
+	   option cards. As this works lets just read in the value already
+	   set and change it to a useable value by Linux.
+
+	   All the IRQ values generated by the console are greater than 90,
+	   so we subtract 80 because it is (90 - allocated ISA IRQ's).  */
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq_orig);
+
+	return irq_orig - 0x80;
+}
+
+static u8
+eiger_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	struct pci_controller *hose = dev->sysdata;
+	int slot, pin = *pinp;
+	int bridge_count = 0;
+
+	/* Find the number of backplane bridges.  */
+	int backplane = inw(0x502) & 0x0f;
+
+	switch (backplane)
+	{
+	   case 0x00: bridge_count = 0; break; /* No bridges */
+	   case 0x01: bridge_count = 1; break; /* 1 */
+	   case 0x03: bridge_count = 2; break; /* 2 */
+	   case 0x07: bridge_count = 3; break; /* 3 */
+	   case 0x0f: bridge_count = 4; break; /* 4 */
+	}
+
+	slot = PCI_SLOT(dev->devfn);
+	while (dev->bus->self) {
+		/* Check for built-in bridges on hose 0. */
+		if (hose->index == 0
+		    && (PCI_SLOT(dev->bus->self->devfn)
+			> 20 - bridge_count)) {
+			slot = PCI_SLOT(dev->devfn);
+			break;
+		}
+		/* Must be a card-based bridge.  */
+		pin = pci_swizzle_interrupt_pin(dev, pin);
+
+		/* Move up the chain of bridges.  */
+		dev = dev->bus->self;
+	}
+	*pinp = pin;
+	return slot;
+}
+
+/*
+ * The System Vectors
+ */
+
+struct alpha_machine_vector eiger_mv __initmv = {
+	.vector_name		= "Eiger",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TSUNAMI_IO,
+	.machine_check		= tsunami_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
+
+	.nr_irqs		= 128,
+	.device_interrupt	= eiger_device_interrupt,
+
+	.init_arch		= tsunami_init_arch,
+	.init_irq		= eiger_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= tsunami_kill_arch,
+	.pci_map_irq		= eiger_map_irq,
+	.pci_swizzle		= eiger_swizzle,
+};
+ALIAS_MV(eiger)
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
new file mode 100644
index 0000000000..5c9c884281
--- /dev/null
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_jensen.c
+ *
+ *	Copyright (C) 1995 Linus Torvalds
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the Jensen.
+ */
+#define __EXTERN_INLINE
+#include <asm/io.h>
+#include <asm/jensen.h>
+#undef  __EXTERN_INLINE
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/*
+ * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
+ * 0x9X0 for the local motherboard interrupts.
+ *
+ * Note especially that those local interrupts CANNOT be masked,
+ * which causes much of the pain below...
+ *
+ *	0x660 - NMI
+ *
+ *	0x800 - IRQ0  interval timer (not used, as we use the RTC timer)
+ *	0x810 - IRQ1  line printer (duh..)
+ *	0x860 - IRQ6  floppy disk
+ *
+ *	0x900 - COM1
+ *	0x920 - COM2
+ *	0x980 - keyboard
+ *	0x990 - mouse
+ *
+ * PCI-based systems are more sane: they don't have the local
+ * interrupts at all, and have only normal PCI interrupts from
+ * devices.  Happily it's easy enough to do a sane mapping from the
+ * Jensen.
+ * 
+ * Note that this means that we may have to do a hardware
+ * "local_op" to a different interrupt than we report to the rest of the
+ * world.
+ */
+
+static void
+jensen_local_enable(struct irq_data *d)
+{
+	/* the parport is really hw IRQ 1, silly Jensen.  */
+	if (d->irq == 7)
+		i8259a_enable_irq(d);
+}
+
+static void
+jensen_local_disable(struct irq_data *d)
+{
+	/* the parport is really hw IRQ 1, silly Jensen.  */
+	if (d->irq == 7)
+		i8259a_disable_irq(d);
+}
+
+static void
+jensen_local_mask_ack(struct irq_data *d)
+{
+	/* the parport is really hw IRQ 1, silly Jensen.  */
+	if (d->irq == 7)
+		i8259a_mask_and_ack_irq(d);
+}
+
+static struct irq_chip jensen_local_irq_type = {
+	.name		= "LOCAL",
+	.irq_unmask	= jensen_local_enable,
+	.irq_mask	= jensen_local_disable,
+	.irq_mask_ack	= jensen_local_mask_ack,
+};
+
+static void 
+jensen_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	switch (vector) {
+	case 0x660:
+		printk("Whee.. NMI received. Probable hardware error\n");
+		printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
+		return;
+
+	/* local device interrupts: */
+	case 0x900: irq = 4; break;		/* com1 -> irq 4 */
+	case 0x920: irq = 3; break;		/* com2 -> irq 3 */
+	case 0x980: irq = 1; break;		/* kbd -> irq 1 */
+	case 0x990: irq = 9; break;		/* mouse -> irq 9 */
+
+	default:
+		if (vector > 0x900) {
+			printk("Unknown local interrupt %lx\n", vector);
+			return;
+		}
+
+		irq = (vector - 0x800) >> 4;
+		if (irq == 1)
+			irq = 7;
+		break;
+	}
+
+	/* If there is no handler yet... */
+	if (!irq_has_action(irq)) {
+	    /* If it is a local interrupt that cannot be masked... */
+	    if (vector >= 0x900)
+	    {
+	        /* Clear keyboard/mouse state */
+	    	inb(0x64);
+		inb(0x60);
+		/* Reset serial ports */
+		inb(0x3fa);
+		inb(0x2fa);
+		outb(0x0c, 0x3fc);
+		outb(0x0c, 0x2fc);
+		/* Clear NMI */
+		outb(0,0x61);
+		outb(0,0x461);
+	    }
+	}
+
+#if 0
+        /* A useful bit of code to find out if an interrupt is going wild.  */
+        {
+          static unsigned int last_msg = 0, last_cc = 0;
+          static int last_irq = -1, count = 0;
+          unsigned int cc;
+
+          __asm __volatile("rpcc %0" : "=r"(cc));
+          ++count;
+#define JENSEN_CYCLES_PER_SEC	(150000000)
+          if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
+	      irq != last_irq) {
+                printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
+                       irq, count, cc-last_cc, get_irq_regs()->pc);
+                count = 0;
+                last_msg = cc;
+                last_irq = irq;
+          }
+          last_cc = cc;
+        }
+#endif
+
+	handle_irq(irq);
+}
+
+static void __init
+jensen_init_irq(void)
+{
+	init_i8259a_irqs();
+
+	irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
+	irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
+	irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
+	irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
+	irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
+
+	common_init_isa_dma();
+}
+
+static void __init
+jensen_init_arch(void)
+{
+	struct pci_controller *hose;
+#ifdef CONFIG_PCI
+	static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
+
+	isa_bridge = &fake_isa_bridge;
+#endif
+
+	/* Create a hose so that we can report i/o base addresses to
+	   userland.  */
+
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hose->mem_space = &iomem_resource;
+	hose->index = 0;
+
+	hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
+	hose->dense_mem_base = 0;
+	hose->sparse_io_base = EISA_IO - IDENT_ADDR;
+	hose->dense_io_base = 0;
+
+	hose->sg_isa = hose->sg_pci = NULL;
+	__direct_map_base = 0;
+	__direct_map_size = 0xffffffff;
+}
+
+static void
+jensen_machine_check(unsigned long vector, unsigned long la)
+{
+	printk(KERN_CRIT "Machine check\n");
+}
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector jensen_mv __initmv = {
+	.vector_name		= "Jensen",
+	DO_EV4_MMU,
+	IO_LITE(JENSEN,jensen),
+	.machine_check		= jensen_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.rtc_port		= 0x170,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= jensen_device_interrupt,
+
+	.init_arch		= jensen_init_arch,
+	.init_irq		= jensen_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= NULL,
+	.kill_arch		= NULL,
+};
+ALIAS_MV(jensen)
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
new file mode 100644
index 0000000000..1f99b03eff
--- /dev/null
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/alpha/kernel/sys_marvel.c
+ *
+ * Marvel / IO7 support
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_marvel.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+#include <asm/vga.h>
+
+#include "proto.h"
+#include "err_impl.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+#if NR_IRQS < MARVEL_NR_IRQS
+# error NR_IRQS < MARVEL_NR_IRQS !!!
+#endif
+
+
+/*
+ * Interrupt handling.
+ */
+static void 
+io7_device_interrupt(unsigned long vector)
+{
+	unsigned int pid;
+	unsigned int irq;
+
+	/*
+	 * Vector is 0x800 + (interrupt)
+	 *
+	 * where (interrupt) is:
+	 *
+	 *	...16|15 14|13     4|3 0
+	 *	-----+-----+--------+---
+	 *	  PE |  0  |   irq  | 0
+	 *
+	 * where (irq) is 
+	 *
+	 *       0x0800 - 0x0ff0	 - 0x0800 + (LSI id << 4)
+	 *	 0x1000 - 0x2ff0	 - 0x1000 + (MSI_DAT<8:0> << 4)
+	 */
+	pid = vector >> 16;
+	irq = ((vector & 0xffff) - 0x800) >> 4;
+
+	irq += 16;				/* offset for legacy */
+	irq &= MARVEL_IRQ_VEC_IRQ_MASK;		/* not too many bits */
+	irq |= pid << MARVEL_IRQ_VEC_PE_SHIFT;	/* merge the pid     */
+
+	handle_irq(irq);
+}
+
+static volatile unsigned long *
+io7_get_irq_ctl(unsigned int irq, struct io7 **pio7)
+{
+	volatile unsigned long *ctl;
+	unsigned int pid;
+	struct io7 *io7;
+
+	pid = irq >> MARVEL_IRQ_VEC_PE_SHIFT;
+
+	if (!(io7 = marvel_find_io7(pid))) {
+		printk(KERN_ERR 
+		       "%s for nonexistent io7 -- vec %x, pid %d\n",
+		       __func__, irq, pid);
+		return NULL;
+	}
+
+	irq &= MARVEL_IRQ_VEC_IRQ_MASK;	/* isolate the vector    */
+	irq -= 16;			/* subtract legacy bias  */
+
+	if (irq >= 0x180) {
+		printk(KERN_ERR 
+		       "%s for invalid irq -- pid %d adjusted irq %x\n",
+		       __func__, pid, irq);
+		return NULL;
+	}
+
+	ctl = &io7->csrs->PO7_LSI_CTL[irq & 0xff].csr; /* assume LSI */
+	if (irq >= 0x80)	     	/* MSI */
+		ctl = &io7->csrs->PO7_MSI_CTL[((irq - 0x80) >> 5) & 0x0f].csr;
+
+	if (pio7) *pio7 = io7;
+	return ctl;
+}
+
+static void
+io7_enable_irq(struct irq_data *d)
+{
+	volatile unsigned long *ctl;
+	unsigned int irq = d->irq;
+	struct io7 *io7;
+
+	ctl = io7_get_irq_ctl(irq, &io7);
+	if (!ctl || !io7) {
+		printk(KERN_ERR "%s: get_ctl failed for irq %x\n",
+		       __func__, irq);
+		return;
+	}
+
+	raw_spin_lock(&io7->irq_lock);
+	*ctl |= 1UL << 24;
+	mb();
+	*ctl;
+	raw_spin_unlock(&io7->irq_lock);
+}
+
+static void
+io7_disable_irq(struct irq_data *d)
+{
+	volatile unsigned long *ctl;
+	unsigned int irq = d->irq;
+	struct io7 *io7;
+
+	ctl = io7_get_irq_ctl(irq, &io7);
+	if (!ctl || !io7) {
+		printk(KERN_ERR "%s: get_ctl failed for irq %x\n",
+		       __func__, irq);
+		return;
+	}
+
+	raw_spin_lock(&io7->irq_lock);
+	*ctl &= ~(1UL << 24);
+	mb();
+	*ctl;
+	raw_spin_unlock(&io7->irq_lock);
+}
+
+static void
+marvel_irq_noop(struct irq_data *d)
+{
+	return;
+}
+
+static struct irq_chip marvel_legacy_irq_type = {
+	.name		= "LEGACY",
+	.irq_mask	= marvel_irq_noop,
+	.irq_unmask	= marvel_irq_noop,
+};
+
+static struct irq_chip io7_lsi_irq_type = {
+	.name		= "LSI",
+	.irq_unmask	= io7_enable_irq,
+	.irq_mask	= io7_disable_irq,
+	.irq_mask_ack	= io7_disable_irq,
+};
+
+static struct irq_chip io7_msi_irq_type = {
+	.name		= "MSI",
+	.irq_unmask	= io7_enable_irq,
+	.irq_mask	= io7_disable_irq,
+	.irq_ack	= marvel_irq_noop,
+};
+
+static void
+io7_redirect_irq(struct io7 *io7, 
+		 volatile unsigned long *csr, 
+		 unsigned int where)
+{
+	unsigned long val;
+	
+	val = *csr;
+	val &= ~(0x1ffUL << 24);		/* clear the target pid   */
+	val |= ((unsigned long)where << 24);	/* set the new target pid */
+	
+	*csr = val;
+	mb();
+	*csr;
+}
+
+static void 
+io7_redirect_one_lsi(struct io7 *io7, unsigned int which, unsigned int where)
+{
+	unsigned long val;
+
+	/*
+	 * LSI_CTL has target PID @ 14
+	 */
+	val = io7->csrs->PO7_LSI_CTL[which].csr;
+	val &= ~(0x1ffUL << 14);		/* clear the target pid */
+	val |= ((unsigned long)where << 14);	/* set the new target pid */
+
+	io7->csrs->PO7_LSI_CTL[which].csr = val;
+	mb();
+	io7->csrs->PO7_LSI_CTL[which].csr;
+}
+
+static void 
+io7_redirect_one_msi(struct io7 *io7, unsigned int which, unsigned int where)
+{
+	unsigned long val;
+
+	/*
+	 * MSI_CTL has target PID @ 14
+	 */
+	val = io7->csrs->PO7_MSI_CTL[which].csr;
+	val &= ~(0x1ffUL << 14);		/* clear the target pid */
+	val |= ((unsigned long)where << 14);	/* set the new target pid */
+
+	io7->csrs->PO7_MSI_CTL[which].csr = val;
+	mb();
+	io7->csrs->PO7_MSI_CTL[which].csr;
+}
+
+static void __init
+init_one_io7_lsi(struct io7 *io7, unsigned int which, unsigned int where)
+{
+	/*
+	 * LSI_CTL has target PID @ 14
+	 */
+	io7->csrs->PO7_LSI_CTL[which].csr = ((unsigned long)where << 14);
+	mb();
+	io7->csrs->PO7_LSI_CTL[which].csr;
+}
+
+static void __init
+init_one_io7_msi(struct io7 *io7, unsigned int which, unsigned int where)
+{
+	/*
+	 * MSI_CTL has target PID @ 14
+	 */
+	io7->csrs->PO7_MSI_CTL[which].csr = ((unsigned long)where << 14);
+	mb();
+	io7->csrs->PO7_MSI_CTL[which].csr;
+}
+
+static void __init
+init_io7_irqs(struct io7 *io7, 
+	      struct irq_chip *lsi_ops,
+	      struct irq_chip *msi_ops)
+{
+	long base = (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT) + 16;
+	long i;
+
+	printk("Initializing interrupts for IO7 at PE %u - base %lx\n",
+		io7->pe, base);
+
+	/*
+	 * Where should interrupts from this IO7 go?
+	 *
+	 * They really should be sent to the local CPU to avoid having to
+	 * traverse the mesh, but if it's not an SMP kernel, they have to
+	 * go to the boot CPU. Send them all to the boot CPU for now,
+	 * as each secondary starts, it can redirect it's local device 
+	 * interrupts.
+	 */
+	printk("  Interrupts reported to CPU at PE %u\n", boot_cpuid);
+
+	raw_spin_lock(&io7->irq_lock);
+
+	/* set up the error irqs */
+	io7_redirect_irq(io7, &io7->csrs->HLT_CTL.csr, boot_cpuid);
+	io7_redirect_irq(io7, &io7->csrs->HPI_CTL.csr, boot_cpuid);
+	io7_redirect_irq(io7, &io7->csrs->CRD_CTL.csr, boot_cpuid);
+	io7_redirect_irq(io7, &io7->csrs->STV_CTL.csr, boot_cpuid);
+	io7_redirect_irq(io7, &io7->csrs->HEI_CTL.csr, boot_cpuid);
+
+	/* Set up the lsi irqs.  */
+	for (i = 0; i < 128; ++i) {
+		irq_set_chip_and_handler(base + i, lsi_ops, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	/* Disable the implemented irqs in hardware.  */
+	for (i = 0; i < 0x60; ++i) 
+		init_one_io7_lsi(io7, i, boot_cpuid);
+
+	init_one_io7_lsi(io7, 0x74, boot_cpuid);
+	init_one_io7_lsi(io7, 0x75, boot_cpuid);
+
+
+	/* Set up the msi irqs.  */
+	for (i = 128; i < (128 + 512); ++i) {
+		irq_set_chip_and_handler(base + i, msi_ops, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	for (i = 0; i < 16; ++i)
+		init_one_io7_msi(io7, i, boot_cpuid);
+
+	raw_spin_unlock(&io7->irq_lock);
+}
+
+static void __init
+marvel_init_irq(void)
+{
+	int i;
+	struct io7 *io7 = NULL;
+
+	/* Reserve the legacy irqs.  */
+	for (i = 0; i < 16; ++i) {
+		irq_set_chip_and_handler(i, &marvel_legacy_irq_type,
+					 handle_level_irq);
+	}
+
+	/* Init the io7 irqs.  */
+	for (io7 = NULL; (io7 = marvel_next_io7(io7)) != NULL; )
+		init_io7_irqs(io7, &io7_lsi_irq_type, &io7_msi_irq_type);
+}
+
+static int 
+marvel_map_irq(const struct pci_dev *cdev, u8 slot, u8 pin)
+{
+	struct pci_dev *dev = (struct pci_dev *)cdev;
+	struct pci_controller *hose = dev->sysdata;
+	struct io7_port *io7_port = hose->sysdata;
+	struct io7 *io7 = io7_port->io7;
+	int msi_loc, msi_data_off;
+	u16 msg_ctl;
+	u16 msg_dat;
+	u8 intline; 
+	int irq;
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline);
+	irq = intline;
+
+	msi_loc = dev->msi_cap;
+	msg_ctl = 0;
+	if (msi_loc) 
+		pci_read_config_word(dev, msi_loc + PCI_MSI_FLAGS, &msg_ctl);
+
+	if (msg_ctl & PCI_MSI_FLAGS_ENABLE) {
+ 		msi_data_off = PCI_MSI_DATA_32;
+		if (msg_ctl & PCI_MSI_FLAGS_64BIT) 
+			msi_data_off = PCI_MSI_DATA_64;
+		pci_read_config_word(dev, msi_loc + msi_data_off, &msg_dat);
+
+		irq = msg_dat & 0x1ff;		/* we use msg_data<8:0> */
+		irq += 0x80;			/* offset for lsi       */
+
+#if 1
+		printk("PCI:%d:%d:%d (hose %d) is using MSI\n",
+		       dev->bus->number, 
+		       PCI_SLOT(dev->devfn), 
+		       PCI_FUNC(dev->devfn),
+		       hose->index);
+		printk("  %d message(s) from 0x%04x\n", 
+		       1 << ((msg_ctl & PCI_MSI_FLAGS_QSIZE) >> 4),
+		       msg_dat);
+		printk("  reporting on %d IRQ(s) from %d (0x%x)\n", 
+		       1 << ((msg_ctl & PCI_MSI_FLAGS_QSIZE) >> 4),
+		       (irq + 16) | (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT),
+		       (irq + 16) | (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT));
+#endif
+
+#if 0
+		pci_write_config_word(dev, msi_loc + PCI_MSI_FLAGS,
+				      msg_ctl & ~PCI_MSI_FLAGS_ENABLE);
+		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline);
+		irq = intline;
+
+		printk("  forcing LSI interrupt on irq %d [0x%x]\n", irq, irq);
+#endif
+	}
+
+	irq += 16;					/* offset for legacy */
+	irq |= io7->pe << MARVEL_IRQ_VEC_PE_SHIFT;	/* merge the pid     */
+
+	return irq; 
+}
+
+static void __init
+marvel_init_pci(void)
+{
+	struct io7 *io7;
+
+	marvel_register_error_handlers();
+
+	/* Indicate that we trust the console to configure things properly */
+	pci_set_flags(PCI_PROBE_ONLY);
+	common_init_pci();
+	locate_and_init_vga(NULL);
+
+	/* Clear any io7 errors.  */
+	for (io7 = NULL; (io7 = marvel_next_io7(io7)) != NULL; ) 
+		io7_clear_errors(io7);
+}
+
+static void __init
+marvel_init_rtc(void)
+{
+	init_rtc_irq(NULL);
+}
+
+static void
+marvel_smp_callin(void)
+{
+	int cpuid = hard_smp_processor_id();
+	struct io7 *io7 = marvel_find_io7(cpuid);
+	unsigned int i;
+
+	if (!io7)
+		return;
+
+	/* 
+	 * There is a local IO7 - redirect all of its interrupts here.
+	 */
+	printk("Redirecting IO7 interrupts to local CPU at PE %u\n", cpuid);
+
+	/* Redirect the error IRQS here.  */
+	io7_redirect_irq(io7, &io7->csrs->HLT_CTL.csr, cpuid);
+	io7_redirect_irq(io7, &io7->csrs->HPI_CTL.csr, cpuid);
+	io7_redirect_irq(io7, &io7->csrs->CRD_CTL.csr, cpuid);
+	io7_redirect_irq(io7, &io7->csrs->STV_CTL.csr, cpuid);
+	io7_redirect_irq(io7, &io7->csrs->HEI_CTL.csr, cpuid);
+
+	/* Redirect the implemented LSIs here.  */
+	for (i = 0; i < 0x60; ++i) 
+		io7_redirect_one_lsi(io7, i, cpuid);
+
+	io7_redirect_one_lsi(io7, 0x74, cpuid);
+	io7_redirect_one_lsi(io7, 0x75, cpuid);
+
+	/* Redirect the MSIs here.  */
+	for (i = 0; i < 16; ++i)
+		io7_redirect_one_msi(io7, i, cpuid);
+}
+
+/*
+ * System Vectors
+ */
+struct alpha_machine_vector marvel_ev7_mv __initmv = {
+	.vector_name		= "MARVEL/EV7",
+	DO_EV7_MMU,
+	.rtc_port		= 0x70,
+	.rtc_boot_cpu_only	= 1,
+	DO_MARVEL_IO,
+	.machine_check		= marvel_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= IO7_DAC_OFFSET,
+
+	.nr_irqs		= MARVEL_NR_IRQS,
+	.device_interrupt	= io7_device_interrupt,
+
+	.agp_info		= marvel_agp_info,
+
+	.smp_callin		= marvel_smp_callin,
+	.init_arch		= marvel_init_arch,
+	.init_irq		= marvel_init_irq,
+	.init_rtc		= marvel_init_rtc,
+	.init_pci		= marvel_init_pci,
+	.kill_arch		= marvel_kill_arch,
+	.pci_map_irq		= marvel_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(marvel_ev7)
diff --git a/arch/alpha/kernel/sys_miata.c b/arch/alpha/kernel/sys_miata.c
new file mode 100644
index 0000000000..e1bee8f84c
--- /dev/null
+++ b/arch/alpha/kernel/sys_miata.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_miata.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999, 2000 Richard Henderson
+ *
+ * Code supporting the MIATA (EV56+PYXIS).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+static void 
+miata_srm_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+	/*
+	 * I really hate to do this, but the MIATA SRM console ignores the
+	 *  low 8 bits in the interrupt summary register, and reports the
+	 *  vector 0x80 *lower* than I expected from the bit numbering in
+	 *  the documentation.
+	 * This was done because the low 8 summary bits really aren't used
+	 *  for reporting any interrupts (the PCI-ISA bridge, bit 7, isn't
+	 *  used for this purpose, as PIC interrupts are delivered as the
+	 *  vectors 0x800-0x8f0).
+	 * But I really don't want to change the fixup code for allocation
+	 *  of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
+	 *  look nice and clean now.
+	 * So, here's this grotty hack... :-(
+	 */
+	if (irq >= 16)
+		irq = irq + 8;
+
+	handle_irq(irq);
+}
+
+static void __init
+miata_init_irq(void)
+{
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = miata_srm_device_interrupt;
+
+#if 0
+	/* These break on MiataGL so we'll try not to do it at all.  */
+	*(vulp)PYXIS_INT_HILO = 0x000000B2UL; mb();	/* ISA/NMI HI */
+	*(vulp)PYXIS_RT_COUNT = 0UL; mb();		/* clear count */
+#endif
+
+	init_i8259a_irqs();
+
+	/* Not interested in the bogus interrupts (3,10), Fan Fault (0),
+           NMI (1), or EIDE (9).
+
+	   We also disable the risers (4,5), since we don't know how to
+	   route the interrupts behind the bridge.  */
+	init_pyxis_irqs(0x63b0000);
+
+	common_init_isa_dma();
+	if (request_irq(16 + 2, no_action, 0, "halt-switch", NULL))
+		pr_err("Failed to register halt-switch interrupt\n");
+	if (request_irq(16 + 6, no_action, 0, "timer-cascade", NULL))
+		pr_err("Failed to register timer-cascade interrupt\n");
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ PYXIS_INT_REQ:
+ * Bit      Meaning
+ * 0        Fan Fault
+ * 1        NMI
+ * 2        Halt/Reset switch
+ * 3        none
+ * 4        CID0 (Riser ID)
+ * 5        CID1 (Riser ID)
+ * 6        Interval timer
+ * 7        PCI-ISA Bridge
+ * 8        Ethernet
+ * 9        EIDE (deprecated, ISA 14/15 used)
+ *10        none
+ *11        USB
+ *12        Interrupt Line A from slot 4
+ *13        Interrupt Line B from slot 4
+ *14        Interrupt Line C from slot 4
+ *15        Interrupt Line D from slot 4
+ *16        Interrupt Line A from slot 5
+ *17        Interrupt line B from slot 5
+ *18        Interrupt Line C from slot 5
+ *19        Interrupt Line D from slot 5
+ *20        Interrupt Line A from slot 1
+ *21        Interrupt Line B from slot 1
+ *22        Interrupt Line C from slot 1
+ *23        Interrupt Line D from slot 1
+ *24        Interrupt Line A from slot 2
+ *25        Interrupt Line B from slot 2
+ *26        Interrupt Line C from slot 2
+ *27        Interrupt Line D from slot 2
+ *27        Interrupt Line A from slot 3
+ *29        Interrupt Line B from slot 3
+ *30        Interrupt Line C from slot 3
+ *31        Interrupt Line D from slot 3
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  3       DC21142 Ethernet
+ *  4       EIDE CMD646
+ *  5       none
+ *  6       USB
+ *  7       PCI-ISA bridge
+ *  8       PCI-PCI Bridge      (SBU Riser)
+ *  9       none
+ * 10       none
+ * 11       PCI on board slot 4 (SBU Riser)
+ * 12       PCI on board slot 5 (SBU Riser)
+ *
+ *  These are behind the bridge, so I'm not sure what to do...
+ *
+ * 13       PCI on board slot 1 (SBU Riser)
+ * 14       PCI on board slot 2 (SBU Riser)
+ * 15       PCI on board slot 3 (SBU Riser)
+ *   
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and 
+ * above for PCI interrupts.  The IRQ relates to which bit the interrupt
+ * comes in on.  This makes interrupt processing much easier.
+ */
+
+static int
+miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+        static char irq_tab[18][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{16+ 8, 16+ 8, 16+ 8, 16+ 8, 16+ 8},  /* IdSel 14,  DC21142 */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 15,  EIDE    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 17,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18,  PCI-ISA */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19,  PCI-PCI */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21,  none    */
+		{16+12, 16+12, 16+13, 16+14, 16+15},  /* IdSel 22,  slot 4  */
+		{16+16, 16+16, 16+17, 16+18, 16+19},  /* IdSel 23,  slot 5  */
+		/* the next 7 are actually on PCI bus 1, across the bridge */
+		{16+11, 16+11, 16+11, 16+11, 16+11},  /* IdSel 24,  QLISP/GL*/
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 25,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 26,  none    */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 27,  none    */
+		{16+20, 16+20, 16+21, 16+22, 16+23},  /* IdSel 28,  slot 1  */
+		{16+24, 16+24, 16+25, 16+26, 16+27},  /* IdSel 29,  slot 2  */
+		{16+28, 16+28, 16+29, 16+30, 16+31},  /* IdSel 30,  slot 3  */
+		/* This bridge is on the main bus of the later orig MIATA */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 31,  PCI-PCI */
+        };
+	const long min_idsel = 3, max_idsel = 20, irqs_per_slot = 5;
+	
+	/* the USB function of the 82c693 has it's interrupt connected to 
+           the 2nd 8259 controller. So we have to check for it first. */
+
+	if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
+		u8 irq=0;
+		struct pci_dev *pdev = pci_get_slot(dev->bus, dev->devfn & ~7);
+		if(pdev == NULL || pci_read_config_byte(pdev, 0x40,&irq) != PCIBIOS_SUCCESSFUL) {
+			pci_dev_put(pdev);
+			return -1;
+		}
+		else	{
+			pci_dev_put(pdev);
+			return irq;
+		}
+	}
+
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8
+miata_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	int slot, pin = *pinp;
+
+	if (dev->bus->number == 0) {
+		slot = PCI_SLOT(dev->devfn);
+	}		
+	/* Check for the built-in bridge.  */
+	else if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
+		 (PCI_SLOT(dev->bus->self->devfn) == 20)) {
+		slot = PCI_SLOT(dev->devfn) + 9;
+	}
+	else 
+	{
+		/* Must be a card-based bridge.  */
+		do {
+			if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
+			    (PCI_SLOT(dev->bus->self->devfn) == 20)) {
+				slot = PCI_SLOT(dev->devfn) + 9;
+				break;
+			}
+			pin = pci_swizzle_interrupt_pin(dev, pin);
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+static void __init
+miata_init_pci(void)
+{
+	cia_init_pci();
+	SMC669_Init(0); /* it might be a GL (fails harmlessly if not) */
+	es1888_init();
+}
+
+static void
+miata_kill_arch(int mode)
+{
+	cia_kill_arch(mode);
+
+#ifndef ALPHA_RESTORE_SRM_SETUP
+	switch(mode) {
+	case LINUX_REBOOT_CMD_RESTART:
+		/* Who said DEC engineers have no sense of humor? ;-)  */ 
+		if (alpha_using_srm) {
+			*(vuip) PYXIS_RESET = 0x0000dead; 
+			mb(); 
+		}
+		break;
+	case LINUX_REBOOT_CMD_HALT:
+		break;
+	case LINUX_REBOOT_CMD_POWER_OFF:
+		break;
+	}
+
+	halt();
+#endif
+}
+
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector miata_mv __initmv = {
+	.vector_name		= "Miata",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_PYXIS_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= PYXIS_DAC_OFFSET,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= pyxis_device_interrupt,
+
+	.init_arch		= pyxis_init_arch,
+	.init_irq		= miata_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= miata_init_pci,
+	.kill_arch		= miata_kill_arch,
+	.pci_map_irq		= miata_map_irq,
+	.pci_swizzle		= miata_swizzle,
+};
+ALIAS_MV(miata)
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
new file mode 100644
index 0000000000..7690dfd57c
--- /dev/null
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_mikasa.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the MIKASA (AlphaServer 1000).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/mce.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_apecs.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for ENABLED irqs.  */
+static int cached_irq_mask;
+
+static inline void
+mikasa_update_irq_hw(int mask)
+{
+	outw(mask, 0x536);
+}
+
+static inline void
+mikasa_enable_irq(struct irq_data *d)
+{
+	mikasa_update_irq_hw(cached_irq_mask |= 1 << (d->irq - 16));
+}
+
+static void
+mikasa_disable_irq(struct irq_data *d)
+{
+	mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (d->irq - 16)));
+}
+
+static struct irq_chip mikasa_irq_type = {
+	.name		= "MIKASA",
+	.irq_unmask	= mikasa_enable_irq,
+	.irq_mask	= mikasa_disable_irq,
+	.irq_mask_ack	= mikasa_disable_irq,
+};
+
+static void 
+mikasa_device_interrupt(unsigned long vector)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary registers */
+	pld = (((~inw(0x534) & 0x0000ffffUL) << 16)
+	       | (((unsigned long) inb(0xa0)) << 8)
+	       | inb(0x20));
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1; /* clear least bit set */
+		if (i < 16) {
+			isa_device_interrupt(vector);
+		} else {
+			handle_irq(i);
+		}
+	}
+}
+
+static void __init
+mikasa_init_irq(void)
+{
+	long i;
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = srm_device_interrupt;
+
+	mikasa_update_irq_hw(0);
+
+	for (i = 16; i < 32; ++i) {
+		irq_set_chip_and_handler(i, &mikasa_irq_type,
+					 handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ 0x536:
+ * Bit      Meaning
+ * 0        Interrupt Line A from slot 0
+ * 1        Interrupt Line B from slot 0
+ * 2        Interrupt Line C from slot 0
+ * 3        Interrupt Line D from slot 0
+ * 4        Interrupt Line A from slot 1
+ * 5        Interrupt line B from slot 1
+ * 6        Interrupt Line C from slot 1
+ * 7        Interrupt Line D from slot 1
+ * 8        Interrupt Line A from slot 2
+ * 9        Interrupt Line B from slot 2
+ *10        Interrupt Line C from slot 2
+ *11        Interrupt Line D from slot 2
+ *12        NCR 810 SCSI
+ *13        Power Supply Fail
+ *14        Temperature Warn
+ *15        Reserved
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  6       NCR SCSI controller
+ *  7       Intel PCI-EISA bridge chip
+ * 11       PCI on board slot 0
+ * 12       PCI on board slot 1
+ * 13       PCI on board slot 2
+ *   
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and 
+ * above for PCI interrupts.  The IRQ relates to which bit the interrupt
+ * comes in on.  This makes interrupt processing much easier.
+ */
+
+static int
+mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[8][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{16+12, 16+12, 16+12, 16+12, 16+12},	/* IdSel 17,  SCSI */
+		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 18,  PCEB */
+		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 19,  ???? */
+		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 20,  ???? */
+		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 21,  ???? */
+		{ 16+0,  16+0,  16+1,  16+2,  16+3},	/* IdSel 22,  slot 0 */
+		{ 16+4,  16+4,  16+5,  16+6,  16+7},	/* IdSel 23,  slot 1 */
+		{ 16+8,  16+8,  16+9, 16+10, 16+11},	/* IdSel 24,  slot 2 */
+	};
+	const long min_idsel = 6, max_idsel = 13, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+
+#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
+static void
+mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+#define MCHK_NO_DEVSEL 0x205U
+#define MCHK_NO_TABT 0x204U
+
+	struct el_common *mchk_header;
+	unsigned int code;
+
+	mchk_header = (struct el_common *)la_ptr;
+
+	/* Clear the error before any reporting.  */
+	mb();
+	mb(); /* magic */
+	draina();
+	apecs_pci_clr_err();
+	wrmces(0x7);
+	mb();
+
+	code = mchk_header->code;
+	process_mcheck_info(vector, la_ptr, "MIKASA APECS",
+			    (mcheck_expected(0)
+			     && (code == MCHK_NO_DEVSEL
+			         || code == MCHK_NO_TABT)));
+}
+#endif
+
+
+/*
+ * The System Vector
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
+struct alpha_machine_vector mikasa_mv __initmv = {
+	.vector_name		= "Mikasa",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= mikasa_apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 32,
+	.device_interrupt	= mikasa_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= mikasa_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.pci_map_irq		= mikasa_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(mikasa)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
+struct alpha_machine_vector mikasa_primo_mv __initmv = {
+	.vector_name		= "Mikasa-Primo",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 32,
+	.device_interrupt	= mikasa_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= mikasa_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cia_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= mikasa_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(mikasa_primo)
+#endif
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
new file mode 100644
index 0000000000..96fd6ff3fe
--- /dev/null
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_nautilus.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1998 Richard Henderson
+ *	Copyright (C) 1999 Alpha Processor, Inc.,
+ *		(David Daniel, Stig Telfer, Soohoon Lee)
+ *
+ * Code supporting NAUTILUS systems.
+ *
+ *
+ * NAUTILUS has the following I/O features:
+ *
+ * a) Driven by AMD 751 aka IRONGATE (northbridge):
+ *     4 PCI slots
+ *     1 AGP slot
+ *
+ * b) Driven by ALI M1543C (southbridge)
+ *     2 ISA slots
+ *     2 IDE connectors
+ *     1 dual drive capable FDD controller
+ *     2 serial ports
+ *     1 ECP/EPP/SP parallel port
+ *     2 USB ports
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+#include <linux/memblock.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_irongate.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "err_impl.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+static void __init
+nautilus_init_irq(void)
+{
+	if (alpha_using_srm) {
+		alpha_mv.device_interrupt = srm_device_interrupt;
+	}
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+}
+
+static int
+nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	/* Preserve the IRQ set up by the console.  */
+
+	u8 irq;
+	/* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as
+	   console reports. Check the device id of AGP bridge to distinguish
+	   UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */
+	if (slot == 1 && pin == 2 &&
+	    dev->bus->self && dev->bus->self->device == 0x700f)
+		return 5;
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+	return irq;
+}
+
+void
+nautilus_kill_arch(int mode)
+{
+	struct pci_bus *bus = pci_isa_hose->bus;
+	u32 pmuport;
+	int off;
+
+	switch (mode) {
+	case LINUX_REBOOT_CMD_RESTART:
+		if (! alpha_using_srm) {
+			u8 t8;
+			pci_bus_read_config_byte(bus, 0x38, 0x43, &t8);
+			pci_bus_write_config_byte(bus, 0x38, 0x43, t8 | 0x80);
+			outb(1, 0x92);
+			outb(0, 0x92);
+			/* NOTREACHED */
+		}
+		break;
+
+	case LINUX_REBOOT_CMD_POWER_OFF:
+		/* Assume M1543C */
+		off = 0x2000;		/* SLP_TYPE = 0, SLP_EN = 1 */
+		pci_bus_read_config_dword(bus, 0x88, 0x10, &pmuport);
+		if (!pmuport) {
+			/* M1535D/D+ */
+			off = 0x3400;	/* SLP_TYPE = 5, SLP_EN = 1 */
+			pci_bus_read_config_dword(bus, 0x88, 0xe0, &pmuport);
+		}
+		pmuport &= 0xfffe;
+		outw(0xffff, pmuport);	/* Clear pending events. */
+		outw(off, pmuport + 4);
+		/* NOTREACHED */
+		break;
+	}
+}
+
+/* Perform analysis of a machine check that arrived from the system (NMI) */
+
+static void
+naut_sys_machine_check(unsigned long vector, unsigned long la_ptr,
+		       struct pt_regs *regs)
+{
+	printk("PC %lx RA %lx\n", regs->pc, regs->r26);
+	irongate_pci_clr_err();
+}
+
+/* Machine checks can come from two sources - those on the CPU and those
+   in the system.  They are analysed separately but all starts here.  */
+
+void
+nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	char *mchk_class;
+
+	/* Now for some analysis.  Machine checks fall into two classes --
+	   those picked up by the system, and those picked up by the CPU.
+	   Add to that the two levels of severity - correctable or not.  */
+
+	if (vector == SCB_Q_SYSMCHK
+	    && ((IRONGATE0->dramms & 0x300) == 0x300)) {
+		unsigned long nmi_ctl;
+
+		/* Clear ALI NMI */
+		nmi_ctl = inb(0x61);
+		nmi_ctl |= 0x0c;
+		outb(nmi_ctl, 0x61);
+		nmi_ctl &= ~0x0c;
+		outb(nmi_ctl, 0x61);
+
+		/* Write again clears error bits.  */
+		IRONGATE0->stat_cmd = IRONGATE0->stat_cmd & ~0x100;
+		mb();
+		IRONGATE0->stat_cmd;
+
+		/* Write again clears error bits.  */
+		IRONGATE0->dramms = IRONGATE0->dramms;
+		mb();
+		IRONGATE0->dramms;
+
+		draina();
+		wrmces(0x7);
+		mb();
+		return;
+	}
+
+	if (vector == SCB_Q_SYSERR)
+		mchk_class = "Correctable";
+	else if (vector == SCB_Q_SYSMCHK)
+		mchk_class = "Fatal";
+	else {
+		ev6_machine_check(vector, la_ptr);
+		return;
+	}
+
+	printk(KERN_CRIT "NAUTILUS Machine check 0x%lx "
+			 "[%s System Machine Check (NMI)]\n",
+	       vector, mchk_class);
+
+	naut_sys_machine_check(vector, la_ptr, get_irq_regs());
+
+	/* Tell the PALcode to clear the machine check */
+	draina();
+	wrmces(0x7);
+	mb();
+}
+
+extern void pcibios_claim_one_bus(struct pci_bus *);
+
+static struct resource irongate_mem = {
+	.name	= "Irongate PCI MEM",
+	.flags	= IORESOURCE_MEM,
+};
+static struct resource busn_resource = {
+	.name	= "PCI busn",
+	.start	= 0,
+	.end	= 255,
+	.flags	= IORESOURCE_BUS,
+};
+
+void __init
+nautilus_init_pci(void)
+{
+	struct pci_controller *hose = hose_head;
+	struct pci_host_bridge *bridge;
+	struct pci_bus *bus;
+	unsigned long bus_align, bus_size, pci_mem;
+	unsigned long memtop = max_low_pfn << PAGE_SHIFT;
+
+	bridge = pci_alloc_host_bridge(0);
+	if (!bridge)
+		return;
+
+	/* Use default IO. */
+	pci_add_resource(&bridge->windows, &ioport_resource);
+	/* Irongate PCI memory aperture, calculate required size before
+	   setting it up. */
+	pci_add_resource(&bridge->windows, &irongate_mem);
+
+	pci_add_resource(&bridge->windows, &busn_resource);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = hose;
+	bridge->busnr = 0;
+	bridge->ops = alpha_mv.pci_ops;
+	bridge->swizzle_irq = alpha_mv.pci_swizzle;
+	bridge->map_irq = alpha_mv.pci_map_irq;
+	bridge->size_windows = 1;
+
+	/* Scan our single hose.  */
+	if (pci_scan_root_bus_bridge(bridge)) {
+		pci_free_host_bridge(bridge);
+		return;
+	}
+	bus = hose->bus = bridge->bus;
+	pcibios_claim_one_bus(bus);
+
+	pci_bus_size_bridges(bus);
+
+	/* Now we've got the size and alignment of PCI memory resources
+	   stored in irongate_mem. Set up the PCI memory range: limit is
+	   hardwired to 0xffffffff, base must be aligned to 16Mb. */
+	bus_align = irongate_mem.start;
+	bus_size = irongate_mem.end + 1 - bus_align;
+	if (bus_align < 0x1000000UL)
+		bus_align = 0x1000000UL;
+
+	pci_mem = (0x100000000UL - bus_size) & -bus_align;
+	irongate_mem.start = pci_mem;
+	irongate_mem.end = 0xffffffffUL;
+
+	/* Register our newly calculated PCI memory window in the resource
+	   tree. */
+	if (request_resource(&iomem_resource, &irongate_mem) < 0)
+		printk(KERN_ERR "Failed to request MEM on hose 0\n");
+
+	printk(KERN_INFO "Irongate pci_mem %pR\n", &irongate_mem);
+
+	if (pci_mem < memtop)
+		memtop = pci_mem;
+	if (memtop > alpha_mv.min_mem_address) {
+		free_reserved_area(__va(alpha_mv.min_mem_address),
+				   __va(memtop), -1, NULL);
+		printk(KERN_INFO "nautilus_init_pci: %ldk freed\n",
+			(memtop - alpha_mv.min_mem_address) >> 10);
+	}
+	if ((IRONGATE0->dev_vendor >> 16) > 0x7006)	/* Albacore? */
+		IRONGATE0->pci_mem = pci_mem;
+
+	pci_bus_assign_resources(bus);
+	pci_bus_add_devices(bus);
+}
+
+/*
+ * The System Vectors
+ */
+
+struct alpha_machine_vector nautilus_mv __initmv = {
+	.vector_name		= "Nautilus",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_IRONGATE_IO,
+	.machine_check		= nautilus_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= IRONGATE_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= isa_device_interrupt,
+
+	.init_arch		= irongate_init_arch,
+	.init_irq		= nautilus_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= nautilus_init_pci,
+	.kill_arch		= nautilus_kill_arch,
+	.pci_map_irq		= nautilus_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(nautilus)
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
new file mode 100644
index 0000000000..47f3ce4f71
--- /dev/null
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_noritake.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the NORITAKE (AlphaServer 1000A), 
+ * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/mce.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_apecs.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+/* Note mask bit is true for ENABLED irqs.  */
+static int cached_irq_mask;
+
+static inline void
+noritake_update_irq_hw(int irq, int mask)
+{
+	int port = 0x54a;
+	if (irq >= 32) {
+	    mask >>= 16;
+	    port = 0x54c;
+	}
+	outw(mask, port);
+}
+
+static void
+noritake_enable_irq(struct irq_data *d)
+{
+	noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
+}
+
+static void
+noritake_disable_irq(struct irq_data *d)
+{
+	noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
+}
+
+static struct irq_chip noritake_irq_type = {
+	.name		= "NORITAKE",
+	.irq_unmask	= noritake_enable_irq,
+	.irq_mask	= noritake_disable_irq,
+	.irq_mask_ack	= noritake_disable_irq,
+};
+
+static void 
+noritake_device_interrupt(unsigned long vector)
+{
+	unsigned long pld;
+	unsigned int i;
+
+	/* Read the interrupt summary registers of NORITAKE */
+	pld = (((unsigned long) inw(0x54c) << 32)
+	       | ((unsigned long) inw(0x54a) << 16)
+	       | ((unsigned long) inb(0xa0) << 8)
+	       | inb(0x20));
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1; /* clear least bit set */
+		if (i < 16) {
+			isa_device_interrupt(vector);
+		} else {
+			handle_irq(i);
+		}
+	}
+}
+
+static void 
+noritake_srm_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+	/*
+	 * I really hate to do this, too, but the NORITAKE SRM console also
+	 * reports PCI vectors *lower* than I expected from the bit numbers
+	 * in the documentation.
+	 * But I really don't want to change the fixup code for allocation
+	 * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
+	 * look nice and clean now.
+	 * So, here's this additional grotty hack... :-(
+	 */
+	if (irq >= 16)
+		irq = irq + 1;
+
+	handle_irq(irq);
+}
+
+static void __init
+noritake_init_irq(void)
+{
+	long i;
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = noritake_srm_device_interrupt;
+
+	outw(0, 0x54a);
+	outw(0, 0x54c);
+
+	for (i = 16; i < 48; ++i) {
+		irq_set_chip_and_handler(i, &noritake_irq_type,
+					 handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ 0x542, summary register #1:
+ * Bit      Meaning
+ * 0        All valid ints from summary regs 2 & 3
+ * 1        QLOGIC ISP1020A SCSI
+ * 2        Interrupt Line A from slot 0
+ * 3        Interrupt Line B from slot 0
+ * 4        Interrupt Line A from slot 1
+ * 5        Interrupt line B from slot 1
+ * 6        Interrupt Line A from slot 2
+ * 7        Interrupt Line B from slot 2
+ * 8        Interrupt Line A from slot 3
+ * 9        Interrupt Line B from slot 3
+ *10        Interrupt Line A from slot 4
+ *11        Interrupt Line B from slot 4
+ *12        Interrupt Line A from slot 5
+ *13        Interrupt Line B from slot 5
+ *14        Interrupt Line A from slot 6
+ *15        Interrupt Line B from slot 6
+ *
+ * Summary @ 0x544, summary register #2:
+ * Bit      Meaning
+ * 0        OR of all unmasked ints in SR #2
+ * 1        OR of secondary bus ints
+ * 2        Interrupt Line C from slot 0
+ * 3        Interrupt Line D from slot 0
+ * 4        Interrupt Line C from slot 1
+ * 5        Interrupt line D from slot 1
+ * 6        Interrupt Line C from slot 2
+ * 7        Interrupt Line D from slot 2
+ * 8        Interrupt Line C from slot 3
+ * 9        Interrupt Line D from slot 3
+ *10        Interrupt Line C from slot 4
+ *11        Interrupt Line D from slot 4
+ *12        Interrupt Line C from slot 5
+ *13        Interrupt Line D from slot 5
+ *14        Interrupt Line C from slot 6
+ *15        Interrupt Line D from slot 6
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  7       Intel PCI-EISA bridge chip
+ *  8       DEC PCI-PCI bridge chip
+ * 11       PCI on board slot 0
+ * 12       PCI on board slot 1
+ * 13       PCI on board slot 2
+ *   
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and 
+ * above for PCI interrupts.  The IRQ relates to which bit the interrupt
+ * comes in on.  This makes interrupt processing much easier.
+ */
+
+static int
+noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[15][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		/* note: IDSELs 16, 17, and 25 are CORELLE only */
+		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 17, S3 Trio64 */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18,  PCEB */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19,  PPB  */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20,  ???? */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21,  ???? */
+		{ 16+2,  16+2,  16+3,  32+2,  32+3},  /* IdSel 22,  slot 0 */
+		{ 16+4,  16+4,  16+5,  32+4,  32+5},  /* IdSel 23,  slot 1 */
+		{ 16+6,  16+6,  16+7,  32+6,  32+7},  /* IdSel 24,  slot 2 */
+		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 25,  slot 3 */
+		/* The following 5 are actually on PCI bus 1, which is 
+		   across the built-in bridge of the NORITAKE only.  */
+		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
+		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 17,  slot 3 */
+		{16+10, 16+10, 16+11, 32+10, 32+11},  /* IdSel 18,  slot 4 */
+		{16+12, 16+12, 16+13, 32+12, 32+13},  /* IdSel 19,  slot 5 */
+		{16+14, 16+14, 16+15, 32+14, 32+15},  /* IdSel 20,  slot 6 */
+	};
+	const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8
+noritake_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	int slot, pin = *pinp;
+
+	if (dev->bus->number == 0) {
+		slot = PCI_SLOT(dev->devfn);
+	}
+	/* Check for the built-in bridge */
+	else if (PCI_SLOT(dev->bus->self->devfn) == 8) {
+		slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */
+	}
+	else
+	{
+		/* Must be a card-based bridge.  */
+		do {
+			if (PCI_SLOT(dev->bus->self->devfn) == 8) {
+				slot = PCI_SLOT(dev->devfn) + 15;
+				break;
+			}
+			pin = pci_swizzle_interrupt_pin(dev, pin);
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
+static void
+noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+#define MCHK_NO_DEVSEL 0x205U
+#define MCHK_NO_TABT 0x204U
+
+        struct el_common *mchk_header;
+        unsigned int code;
+
+        mchk_header = (struct el_common *)la_ptr;
+
+        /* Clear the error before any reporting.  */
+        mb();
+        mb(); /* magic */
+        draina();
+        apecs_pci_clr_err();
+        wrmces(0x7);
+        mb();
+
+        code = mchk_header->code;
+        process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
+                            (mcheck_expected(0)
+                             && (code == MCHK_NO_DEVSEL
+                                 || code == MCHK_NO_TABT)));
+}
+#endif
+
+
+/*
+ * The System Vectors
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
+struct alpha_machine_vector noritake_mv __initmv = {
+	.vector_name		= "Noritake",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= noritake_apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= noritake_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= noritake_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.pci_map_irq		= noritake_map_irq,
+	.pci_swizzle		= noritake_swizzle,
+};
+ALIAS_MV(noritake)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
+struct alpha_machine_vector noritake_primo_mv __initmv = {
+	.vector_name		= "Noritake-Primo",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= noritake_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= noritake_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= cia_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= noritake_map_irq,
+	.pci_swizzle		= noritake_swizzle,
+};
+ALIAS_MV(noritake_primo)
+#endif
diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c
new file mode 100644
index 0000000000..b5846ffdad
--- /dev/null
+++ b/arch/alpha/kernel/sys_rawhide.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_rawhide.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the RAWHIDE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_mcpcia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/*
+ * HACK ALERT! only the boot cpu is used for interrupts.
+ */
+
+
+/* Note mask bit is true for ENABLED irqs.  */
+
+static unsigned int hose_irq_masks[4] = {
+	0xff0000, 0xfe0000, 0xff0000, 0xff0000
+};
+static unsigned int cached_irq_masks[4];
+DEFINE_SPINLOCK(rawhide_irq_lock);
+
+static inline void
+rawhide_update_irq_hw(int hose, int mask)
+{
+	*(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(hose)) = mask;
+	mb();
+	*(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(hose));
+}
+
+#define hose_exists(h) \
+  (((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
+
+static inline void 
+rawhide_enable_irq(struct irq_data *d)
+{
+	unsigned int mask, hose;
+	unsigned int irq = d->irq;
+
+	irq -= 16;
+	hose = irq / 24;
+	if (!hose_exists(hose)) /* if hose non-existent, exit */
+		return;
+
+	irq -= hose * 24;
+	mask = 1 << irq;
+
+	spin_lock(&rawhide_irq_lock);
+	mask |= cached_irq_masks[hose];
+	cached_irq_masks[hose] = mask;
+	rawhide_update_irq_hw(hose, mask);
+	spin_unlock(&rawhide_irq_lock);
+}
+
+static void 
+rawhide_disable_irq(struct irq_data *d)
+{
+	unsigned int mask, hose;
+	unsigned int irq = d->irq;
+
+	irq -= 16;
+	hose = irq / 24;
+	if (!hose_exists(hose)) /* if hose non-existent, exit */
+		return;
+
+	irq -= hose * 24;
+	mask = ~(1 << irq) | hose_irq_masks[hose];
+
+	spin_lock(&rawhide_irq_lock);
+	mask &= cached_irq_masks[hose];
+	cached_irq_masks[hose] = mask;
+	rawhide_update_irq_hw(hose, mask);
+	spin_unlock(&rawhide_irq_lock);
+}
+
+static void
+rawhide_mask_and_ack_irq(struct irq_data *d)
+{
+	unsigned int mask, mask1, hose;
+	unsigned int irq = d->irq;
+
+	irq -= 16;
+	hose = irq / 24;
+	if (!hose_exists(hose)) /* if hose non-existent, exit */
+		return;
+
+	irq -= hose * 24;
+	mask1 = 1 << irq;
+	mask = ~mask1 | hose_irq_masks[hose];
+
+	spin_lock(&rawhide_irq_lock);
+
+	mask &= cached_irq_masks[hose];
+	cached_irq_masks[hose] = mask;
+	rawhide_update_irq_hw(hose, mask);
+
+	/* Clear the interrupt.  */
+	*(vuip)MCPCIA_INT_REQ(MCPCIA_HOSE2MID(hose)) = mask1;
+
+	spin_unlock(&rawhide_irq_lock);
+}
+
+static struct irq_chip rawhide_irq_type = {
+	.name		= "RAWHIDE",
+	.irq_unmask	= rawhide_enable_irq,
+	.irq_mask	= rawhide_disable_irq,
+	.irq_mask_ack	= rawhide_mask_and_ack_irq,
+};
+
+static void 
+rawhide_srm_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+        /*
+         * The RAWHIDE SRM console reports PCI interrupts with a vector
+	 * 0x80 *higher* than one might expect, as PCI IRQ 0 (ie bit 0)
+	 * shows up as IRQ 24, etc, etc. We adjust it down by 8 to have
+	 * it line up with the actual bit numbers from the REQ registers,
+	 * which is how we manage the interrupts/mask. Sigh...
+	 *
+	 * Also, PCI #1 interrupts are offset some more... :-(
+         */
+
+	if (irq == 52) {
+		/* SCSI on PCI1 is special.  */
+		irq = 72;
+	}
+
+	/* Adjust by which hose it is from.  */
+	irq -= ((irq + 16) >> 2) & 0x38;
+
+	handle_irq(irq);
+}
+
+static void __init
+rawhide_init_irq(void)
+{
+	struct pci_controller *hose;
+	long i;
+
+	mcpcia_init_hoses();
+
+	/* Clear them all; only hoses that exist will be non-zero. */
+	for (i = 0; i < MCPCIA_MAX_HOSES; i++) cached_irq_masks[i] = 0;
+
+	for (hose = hose_head; hose; hose = hose->next) {
+		unsigned int h = hose->index;
+		unsigned int mask = hose_irq_masks[h];
+
+		cached_irq_masks[h] = mask;
+		*(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(h)) = mask;
+		*(vuip)MCPCIA_INT_MASK1(MCPCIA_HOSE2MID(h)) = 0;
+	}
+
+	for (i = 16; i < 128; ++i) {
+		irq_set_chip_and_handler(i, &rawhide_irq_type,
+					 handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+}
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ MCPCIA_PCI0_INT_REQ:
+ * Bit      Meaning
+ * 0        Interrupt Line A from slot 2 PCI0
+ * 1        Interrupt Line B from slot 2 PCI0
+ * 2        Interrupt Line C from slot 2 PCI0
+ * 3        Interrupt Line D from slot 2 PCI0
+ * 4        Interrupt Line A from slot 3 PCI0
+ * 5        Interrupt Line B from slot 3 PCI0
+ * 6        Interrupt Line C from slot 3 PCI0
+ * 7        Interrupt Line D from slot 3 PCI0
+ * 8        Interrupt Line A from slot 4 PCI0
+ * 9        Interrupt Line B from slot 4 PCI0
+ * 10       Interrupt Line C from slot 4 PCI0
+ * 11       Interrupt Line D from slot 4 PCI0
+ * 12       Interrupt Line A from slot 5 PCI0
+ * 13       Interrupt Line B from slot 5 PCI0
+ * 14       Interrupt Line C from slot 5 PCI0
+ * 15       Interrupt Line D from slot 5 PCI0
+ * 16       EISA interrupt (PCI 0) or SCSI interrupt (PCI 1)
+ * 17-23    NA
+ *
+ * IdSel	
+ *   1	 EISA bridge (PCI bus 0 only)
+ *   2 	 PCI option slot 2
+ *   3	 PCI option slot 3
+ *   4   PCI option slot 4
+ *   5   PCI option slot 5
+ * 
+ */
+
+static int
+rawhide_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[5][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{ 16+16, 16+16, 16+16, 16+16, 16+16}, /* IdSel 1 SCSI PCI 1 */
+		{ 16+ 0, 16+ 0, 16+ 1, 16+ 2, 16+ 3}, /* IdSel 2 slot 2 */
+		{ 16+ 4, 16+ 4, 16+ 5, 16+ 6, 16+ 7}, /* IdSel 3 slot 3 */
+		{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 4 slot 4 */
+		{ 16+12, 16+12, 16+13, 16+14, 16+15}  /* IdSel 5 slot 5 */
+	};
+	const long min_idsel = 1, max_idsel = 5, irqs_per_slot = 5;
+
+	struct pci_controller *hose = dev->sysdata;
+	int irq = COMMON_TABLE_LOOKUP;
+	if (irq >= 0)
+		irq += 24 * hose->index;
+	return irq;
+}
+
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector rawhide_mv __initmv = {
+	.vector_name		= "Rawhide",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_MCPCIA_IO,
+	.machine_check		= mcpcia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= MCPCIA_DEFAULT_MEM_BASE,
+	.pci_dac_offset		= MCPCIA_DAC_OFFSET,
+
+	.nr_irqs		= 128,
+	.device_interrupt	= rawhide_srm_device_interrupt,
+
+	.init_arch		= mcpcia_init_arch,
+	.init_irq		= rawhide_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= NULL,
+	.pci_map_irq		= rawhide_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(rawhide)
diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c
new file mode 100644
index 0000000000..4b1c8d85c4
--- /dev/null
+++ b/arch/alpha/kernel/sys_ruffian.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_ruffian.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999, 2000 Richard Henderson
+ *
+ * Code supporting the RUFFIAN.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+static void __init
+ruffian_init_irq(void)
+{
+	/* Invert 6&7 for i82371 */
+	*(vulp)PYXIS_INT_HILO  = 0x000000c0UL; mb();
+	*(vulp)PYXIS_INT_CNFG  = 0x00002064UL; mb();	 /* all clear */
+
+	outb(0x11,0xA0);
+	outb(0x08,0xA1);
+	outb(0x02,0xA1);
+	outb(0x01,0xA1);
+	outb(0xFF,0xA1);
+	
+	outb(0x11,0x20);
+	outb(0x00,0x21);
+	outb(0x04,0x21);
+	outb(0x01,0x21);
+	outb(0xFF,0x21);
+	
+	/* Finish writing the 82C59A PIC Operation Control Words */
+	outb(0x20,0xA0);
+	outb(0x20,0x20);
+	
+	init_i8259a_irqs();
+
+	/* Not interested in the bogus interrupts (0,3,6),
+	   NMI (1), HALT (2), flash (5), or 21142 (8).  */
+	init_pyxis_irqs(0x16f0000);
+
+	common_init_isa_dma();
+}
+
+#define RUFFIAN_LATCH	DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ)
+
+static void __init
+ruffian_init_rtc(void)
+{
+	/* Ruffian does not have the RTC connected to the CPU timer
+	   interrupt.  Instead, it uses the PIT connected to IRQ 0.  */
+
+	/* Setup interval timer.  */
+	outb(0x34, 0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
+	outb(RUFFIAN_LATCH & 0xff, 0x40);	/* LSB */
+	outb(RUFFIAN_LATCH >> 8, 0x40);		/* MSB */
+
+	outb(0xb6, 0x43);		/* pit counter 2: speaker */
+	outb(0x31, 0x42);
+	outb(0x13, 0x42);
+
+	if (request_irq(0, rtc_timer_interrupt, 0, "timer", NULL))
+		pr_err("Failed to request irq 0 (timer)\n");
+}
+
+static void
+ruffian_kill_arch (int mode)
+{
+	cia_kill_arch(mode);
+#if 0
+	/* This only causes re-entry to ARCSBIOS */
+	/* Perhaps this works for other PYXIS as well?  */
+	*(vuip) PYXIS_RESET = 0x0000dead;
+	mb();
+#endif
+}
+
+/*
+ *  Interrupt routing:
+ *
+ *		Primary bus
+ *	  IdSel		INTA	INTB	INTC	INTD
+ * 21052   13		  -	  -	  -	  -
+ * SIO	   14		 23	  -	  -	  -
+ * 21143   15		 44	  -	  -	  -
+ * Slot 0  17		 43	 42	 41	 40
+ *
+ *		Secondary bus
+ *	  IdSel		INTA	INTB	INTC	INTD
+ * Slot 0   8 (18)	 19	 18	 17	 16
+ * Slot 1   9 (19)	 31	 30	 29	 28
+ * Slot 2  10 (20)	 27	 26	 25	 24
+ * Slot 3  11 (21)	 39	 38	 37	 36
+ * Slot 4  12 (22)	 35	 34	 33	 32
+ * 53c875  13 (23)	 20	  -	  -	  -
+ *
+ */
+
+static int
+ruffian_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+        static char irq_tab[11][5] = {
+	      /*INT  INTA INTB INTC INTD */
+		{-1,  -1,  -1,  -1,  -1},  /* IdSel 13,  21052	     */
+		{-1,  -1,  -1,  -1,  -1},  /* IdSel 14,  SIO	     */
+		{44,  44,  44,  44,  44},  /* IdSel 15,  21143	     */
+		{-1,  -1,  -1,  -1,  -1},  /* IdSel 16,  none	     */
+		{43,  43,  42,  41,  40},  /* IdSel 17,  64-bit slot */
+		/* the next 6 are actually on PCI bus 1, across the bridge */
+		{19,  19,  18,  17,  16},  /* IdSel  8,  slot 0	     */
+		{31,  31,  30,  29,  28},  /* IdSel  9,  slot 1	     */
+		{27,  27,  26,  25,  24},  /* IdSel 10,  slot 2	     */
+		{39,  39,  38,  37,  36},  /* IdSel 11,  slot 3	     */
+		{35,  35,  34,  33,  32},  /* IdSel 12,  slot 4	     */
+		{20,  20,  20,  20,  20},  /* IdSel 13,  53c875	     */
+        };
+	const long min_idsel = 13, max_idsel = 23, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8
+ruffian_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	int slot, pin = *pinp;
+
+	if (dev->bus->number == 0) {
+		slot = PCI_SLOT(dev->devfn);
+	}		
+	/* Check for the built-in bridge.  */
+	else if (PCI_SLOT(dev->bus->self->devfn) == 13) {
+		slot = PCI_SLOT(dev->devfn) + 10;
+	}
+	else 
+	{
+		/* Must be a card-based bridge.  */
+		do {
+			if (PCI_SLOT(dev->bus->self->devfn) == 13) {
+				slot = PCI_SLOT(dev->devfn) + 10;
+				break;
+			}
+			pin = pci_swizzle_interrupt_pin(dev, pin);
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+#ifdef BUILDING_FOR_MILO
+/*
+ * The DeskStation Ruffian motherboard firmware does not place
+ * the memory size in the PALimpure area.  Therefore, we use
+ * the Bank Configuration Registers in PYXIS to obtain the size.
+ */
+static unsigned long __init
+ruffian_get_bank_size(unsigned long offset)
+{
+	unsigned long bank_addr, bank, ret = 0;
+
+	/* Valid offsets are: 0x800, 0x840 and 0x880
+	   since Ruffian only uses three banks.  */
+	bank_addr = (unsigned long)PYXIS_MCR + offset;
+	bank = *(vulp)bank_addr;
+
+	/* Check BANK_ENABLE */
+	if (bank & 0x01) {
+		static unsigned long size[] __initdata = {
+			0x40000000UL, /* 0x00,   1G */
+			0x20000000UL, /* 0x02, 512M */
+			0x10000000UL, /* 0x04, 256M */
+			0x08000000UL, /* 0x06, 128M */
+			0x04000000UL, /* 0x08,  64M */
+			0x02000000UL, /* 0x0a,  32M */
+			0x01000000UL, /* 0x0c,  16M */
+			0x00800000UL, /* 0x0e,   8M */
+			0x80000000UL, /* 0x10,   2G */
+		};
+
+		bank = (bank & 0x1e) >> 1;
+		if (bank < ARRAY_SIZE(size))
+			ret = size[bank];
+	}
+
+	return ret;
+}
+#endif /* BUILDING_FOR_MILO */
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector ruffian_mv __initmv = {
+	.vector_name		= "Ruffian",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_PYXIS_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= PYXIS_DAC_OFFSET,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= pyxis_device_interrupt,
+
+	.init_arch		= pyxis_init_arch,
+	.init_irq		= ruffian_init_irq,
+	.init_rtc		= ruffian_init_rtc,
+	.init_pci		= cia_init_pci,
+	.kill_arch		= ruffian_kill_arch,
+	.pci_map_irq		= ruffian_map_irq,
+	.pci_swizzle		= ruffian_swizzle,
+};
+ALIAS_MV(ruffian)
diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c
new file mode 100644
index 0000000000..94046f9aea
--- /dev/null
+++ b/arch/alpha/kernel/sys_rx164.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_rx164.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the RX164 (PCA56+POLARIS).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_polaris.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for ENABLED irqs.  */
+static unsigned long cached_irq_mask;
+
+static inline void
+rx164_update_irq_hw(unsigned long mask)
+{
+	volatile unsigned int *irq_mask;
+
+	irq_mask = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x74);
+	*irq_mask = mask;
+	mb();
+	*irq_mask;
+}
+
+static inline void
+rx164_enable_irq(struct irq_data *d)
+{
+	rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
+}
+
+static void
+rx164_disable_irq(struct irq_data *d)
+{
+	rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
+}
+
+static struct irq_chip rx164_irq_type = {
+	.name		= "RX164",
+	.irq_unmask	= rx164_enable_irq,
+	.irq_mask	= rx164_disable_irq,
+	.irq_mask_ack	= rx164_disable_irq,
+};
+
+static void 
+rx164_device_interrupt(unsigned long vector)
+{
+	unsigned long pld;
+	volatile unsigned int *dirr;
+	long i;
+
+	/* Read the interrupt summary register.  On Polaris, this is
+	   the DIRR register in PCI config space (offset 0x84).  */
+	dirr = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x84);
+	pld = *dirr;
+
+	/*
+	 * Now for every possible bit set, work through them and call
+	 * the appropriate interrupt handler.
+	 */
+	while (pld) {
+		i = ffz(~pld);
+		pld &= pld - 1; /* clear least bit set */
+		if (i == 20) {
+			isa_no_iack_sc_device_interrupt(vector);
+		} else {
+			handle_irq(16+i);
+		}
+	}
+}
+
+static void __init
+rx164_init_irq(void)
+{
+	long i;
+
+	rx164_update_irq_hw(0);
+	for (i = 16; i < 40; ++i) {
+		irq_set_chip_and_handler(i, &rx164_irq_type, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+
+	if (request_irq(16 + 20, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
+}
+
+
+/*
+ * The RX164 changed its interrupt routing between pass1 and pass2...
+ *
+ * PASS1:
+ *
+ *      Slot    IDSEL   INTA    INTB    INTC    INTD    
+ *      0       6       5       10      15      20
+ *      1       7       4       9       14      19
+ *      2       5       3       8       13      18
+ *      3       9       2       7       12      17
+ *      4       10      1       6       11      16
+ *
+ * PASS2:
+ *      Slot    IDSEL   INTA    INTB    INTC    INTD    
+ *      0       5       1       7       12      17
+ *      1       6       2       8       13      18
+ *      2       8       3       9       14      19
+ *      3       9       4       10      15      20
+ *      4       10      5       11      16      6
+ *      
+ */
+
+/*
+ * IdSel       
+ *   5  32 bit PCI option slot 0
+ *   6  64 bit PCI option slot 1
+ *   7  PCI-ISA bridge
+ *   7  64 bit PCI option slot 2
+ *   9  32 bit PCI option slot 3
+ *  10  PCI-PCI bridge
+ * 
+ */
+
+static int
+rx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+#if 0
+	static char irq_tab_pass1[6][5] __initdata = {
+	  /*INT   INTA  INTB  INTC   INTD */
+	  { 16+3, 16+3, 16+8, 16+13, 16+18},      /* IdSel 5,  slot 2 */
+	  { 16+5, 16+5, 16+10, 16+15, 16+20},     /* IdSel 6,  slot 0 */
+	  { 16+4, 16+4, 16+9, 16+14, 16+19},      /* IdSel 7,  slot 1 */
+	  { -1,     -1,    -1,    -1,   -1},      /* IdSel 8, PCI/ISA bridge */
+	  { 16+2, 16+2, 16+7, 16+12, 16+17},      /* IdSel 9,  slot 3 */
+	  { 16+1, 16+1, 16+6, 16+11, 16+16},      /* IdSel 10, slot 4 */
+	};
+#else
+	static char irq_tab[6][5] = {
+	  /*INT   INTA  INTB  INTC   INTD */
+	  { 16+0, 16+0, 16+6, 16+11, 16+16},      /* IdSel 5,  slot 0 */
+	  { 16+1, 16+1, 16+7, 16+12, 16+17},      /* IdSel 6,  slot 1 */
+	  { -1,     -1,    -1,    -1,   -1},      /* IdSel 7, PCI/ISA bridge */
+	  { 16+2, 16+2, 16+8, 16+13, 16+18},      /* IdSel 8,  slot 2 */
+	  { 16+3, 16+3, 16+9, 16+14, 16+19},      /* IdSel 9,  slot 3 */
+	  { 16+4, 16+4, 16+10, 16+15, 16+5},      /* IdSel 10, PCI-PCI */
+	};
+#endif
+	const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
+
+	/* JRP - Need to figure out how to distinguish pass1 from pass2,
+	   and use the correct table.  */
+	return COMMON_TABLE_LOOKUP;
+}
+
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector rx164_mv __initmv = {
+	.vector_name		= "RX164",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_POLARIS_IO,
+	.machine_check		= polaris_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 40,
+	.device_interrupt	= rx164_device_interrupt,
+
+	.init_arch		= polaris_init_arch,
+	.init_irq		= rx164_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= NULL,
+	.pci_map_irq		= rx164_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(rx164)
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
new file mode 100644
index 0000000000..930005b2f6
--- /dev/null
+++ b/arch/alpha/kernel/sys_sable.c
@@ -0,0 +1,635 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_sable.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the Sable, Sable-Gamma, and Lynx systems.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_t2.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+DEFINE_SPINLOCK(sable_lynx_irq_lock);
+
+typedef struct irq_swizzle_struct
+{
+	char irq_to_mask[64];
+	char mask_to_irq[64];
+
+	/* Note mask bit is true for DISABLED irqs.  */
+	unsigned long shadow_mask;
+
+	void (*update_irq_hw)(unsigned long bit, unsigned long mask);
+	void (*ack_irq_hw)(unsigned long bit);
+
+} irq_swizzle_t;
+
+static irq_swizzle_t *sable_lynx_irq_swizzle;
+
+static void sable_lynx_init_irq(int nr_of_irqs);
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
+
+/***********************************************************************/
+/*
+ *   For SABLE, which is really baroque, we manage 40 IRQ's, but the
+ *   hardware really only supports 24, not via normal ISA PIC,
+ *   but cascaded custom 8259's, etc.
+ *	 0-7  (char at 536)
+ *	 8-15 (char at 53a)
+ *	16-23 (char at 53c)
+ *
+ * Summary Registers (536/53a/53c):
+ *
+ * Bit      Meaning               Kernel IRQ
+ *------------------------------------------
+ * 0        PCI slot 0			34
+ * 1        NCR810 (builtin)		33
+ * 2        TULIP (builtin)		32
+ * 3        mouse			12
+ * 4        PCI slot 1			35
+ * 5        PCI slot 2			36
+ * 6        keyboard			1
+ * 7        floppy			6
+ * 8        COM2			3
+ * 9        parallel port		7
+ *10        EISA irq 3			-
+ *11        EISA irq 4			-
+ *12        EISA irq 5			5
+ *13        EISA irq 6			-
+ *14        EISA irq 7			-
+ *15        COM1			4
+ *16        EISA irq 9			9
+ *17        EISA irq 10			10
+ *18        EISA irq 11			11
+ *19        EISA irq 12			-
+ *20        EISA irq 13			-
+ *21        EISA irq 14			14
+ *22        NC				15
+ *23        IIC				-
+ */
+
+static void
+sable_update_irq_hw(unsigned long bit, unsigned long mask)
+{
+	int port = 0x537;
+
+	if (bit >= 16) {
+		port = 0x53d;
+		mask >>= 16;
+	} else if (bit >= 8) {
+		port = 0x53b;
+		mask >>= 8;
+	}
+
+	outb(mask, port);
+}
+
+static void
+sable_ack_irq_hw(unsigned long bit)
+{
+	int port, val1, val2;
+
+	if (bit >= 16) {
+		port = 0x53c;
+		val1 = 0xE0 | (bit - 16);
+		val2 = 0xE0 | 4;
+	} else if (bit >= 8) {
+		port = 0x53a;
+		val1 = 0xE0 | (bit - 8);
+		val2 = 0xE0 | 3;
+	} else {
+		port = 0x536;
+		val1 = 0xE0 | (bit - 0);
+		val2 = 0xE0 | 1;
+	}
+
+	outb(val1, port);	/* ack the slave */
+	outb(val2, 0x534);	/* ack the master */
+}
+
+static irq_swizzle_t sable_irq_swizzle = {
+	{
+		-1,  6, -1,  8, 15, 12,  7,  9,	/* pseudo PIC  0-7  */
+		-1, 16, 17, 18,  3, -1, 21, 22,	/* pseudo PIC  8-15 */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo EISA 0-7  */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo EISA 8-15  */
+		 2,  1,  0,  4,  5, -1, -1, -1,	/* pseudo PCI */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
+		-1, -1, -1, -1, -1, -1, -1, -1 	/*  */
+	},
+	{
+		34, 33, 32, 12, 35, 36,  1,  6,	/* mask 0-7  */
+		 3,  7, -1, -1,  5, -1, -1,  4,	/* mask 8-15  */
+		 9, 10, 11, -1, -1, 14, 15, -1,	/* mask 16-23  */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/*  */
+		-1, -1, -1, -1, -1, -1, -1, -1	/*  */
+	},
+	-1,
+	sable_update_irq_hw,
+	sable_ack_irq_hw
+};
+
+static void __init
+sable_init_irq(void)
+{
+	outb(-1, 0x537);	/* slave 0 */
+	outb(-1, 0x53b);	/* slave 1 */
+	outb(-1, 0x53d);	/* slave 2 */
+	outb(0x44, 0x535);	/* enable cascades in master */
+
+	sable_lynx_irq_swizzle = &sable_irq_swizzle;
+	sable_lynx_init_irq(40);
+}
+
+/*
+ * PCI Fixup configuration for ALPHA SABLE (2100).
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  0       TULIP
+ *  1       SCSI
+ *  2       PCI-EISA bridge
+ *  3       none
+ *  4       none
+ *  5       none
+ *  6       PCI on board slot 0
+ *  7       PCI on board slot 1
+ *  8       PCI on board slot 2
+ *   
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and 
+ * above for PCI interrupts.  The IRQ relates to which bit the interrupt
+ * comes in on.  This makes interrupt processing much easier.
+ */
+/*
+ * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
+ * with the values in the irq swizzling tables above.
+ */
+
+static int
+sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[9][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{ 32+0,  32+0,  32+0,  32+0,  32+0},  /* IdSel 0,  TULIP  */
+		{ 32+1,  32+1,  32+1,  32+1,  32+1},  /* IdSel 1,  SCSI   */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 2,  SIO   */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 3,  none   */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 4,  none   */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 5,  none   */
+		{ 32+2,  32+2,  32+2,  32+2,  32+2},  /* IdSel 6,  slot 0 */
+		{ 32+3,  32+3,  32+3,  32+3,  32+3},  /* IdSel 7,  slot 1 */
+		{ 32+4,  32+4,  32+4,  32+4,  32+4}   /* IdSel 8,  slot 2 */
+	};
+	long min_idsel = 0, max_idsel = 8, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
+
+/***********************************************************************/
+/* LYNX hardware specifics
+ */
+/*
+ *   For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
+ *
+ * Bit      Meaning               Kernel IRQ
+ *------------------------------------------
+ * 0        
+ * 1        
+ * 2        
+ * 3        mouse			12
+ * 4        
+ * 5        
+ * 6        keyboard			1
+ * 7        floppy			6
+ * 8        COM2			3
+ * 9        parallel port		7
+ *10        EISA irq 3			-
+ *11        EISA irq 4			-
+ *12        EISA irq 5			5
+ *13        EISA irq 6			-
+ *14        EISA irq 7			-
+ *15        COM1			4
+ *16        EISA irq 9			9
+ *17        EISA irq 10			10
+ *18        EISA irq 11			11
+ *19        EISA irq 12			-
+ *20        
+ *21        EISA irq 14			14
+ *22        EISA irq 15			15
+ *23        IIC				-
+ *24        VGA (builtin)               -
+ *25
+ *26
+ *27
+ *28        NCR810 (builtin)		28
+ *29
+ *30
+ *31
+ *32        PCI 0 slot 4 A primary bus  32
+ *33        PCI 0 slot 4 B primary bus  33
+ *34        PCI 0 slot 4 C primary bus  34
+ *35        PCI 0 slot 4 D primary bus
+ *36        PCI 0 slot 5 A primary bus
+ *37        PCI 0 slot 5 B primary bus
+ *38        PCI 0 slot 5 C primary bus
+ *39        PCI 0 slot 5 D primary bus
+ *40        PCI 0 slot 6 A primary bus
+ *41        PCI 0 slot 6 B primary bus
+ *42        PCI 0 slot 6 C primary bus
+ *43        PCI 0 slot 6 D primary bus
+ *44        PCI 0 slot 7 A primary bus
+ *45        PCI 0 slot 7 B primary bus
+ *46        PCI 0 slot 7 C primary bus
+ *47        PCI 0 slot 7 D primary bus
+ *48        PCI 0 slot 0 A secondary bus
+ *49        PCI 0 slot 0 B secondary bus
+ *50        PCI 0 slot 0 C secondary bus
+ *51        PCI 0 slot 0 D secondary bus
+ *52        PCI 0 slot 1 A secondary bus
+ *53        PCI 0 slot 1 B secondary bus
+ *54        PCI 0 slot 1 C secondary bus
+ *55        PCI 0 slot 1 D secondary bus
+ *56        PCI 0 slot 2 A secondary bus
+ *57        PCI 0 slot 2 B secondary bus
+ *58        PCI 0 slot 2 C secondary bus
+ *59        PCI 0 slot 2 D secondary bus
+ *60        PCI 0 slot 3 A secondary bus
+ *61        PCI 0 slot 3 B secondary bus
+ *62        PCI 0 slot 3 C secondary bus
+ *63        PCI 0 slot 3 D secondary bus
+ */
+
+static void
+lynx_update_irq_hw(unsigned long bit, unsigned long mask)
+{
+	/*
+	 * Write the AIR register on the T3/T4 with the
+	 * address of the IC mask register (offset 0x40)
+	 */
+	*(vulp)T2_AIR = 0x40;
+	mb();
+	*(vulp)T2_AIR; /* re-read to force write */
+	mb();
+	*(vulp)T2_DIR = mask;    
+	mb();
+	mb();
+}
+
+static void
+lynx_ack_irq_hw(unsigned long bit)
+{
+	*(vulp)T2_VAR = (u_long) bit;
+	mb();
+	mb();
+}
+
+static irq_swizzle_t lynx_irq_swizzle = {
+	{ /* irq_to_mask */
+		-1,  6, -1,  8, 15, 12,  7,  9,	/* pseudo PIC  0-7  */
+		-1, 16, 17, 18,  3, -1, 21, 22,	/* pseudo PIC  8-15 */
+		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo */
+		-1, -1, -1, -1, 28, -1, -1, -1,	/* pseudo */
+		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
+		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
+		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
+		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
+	},
+	{ /* mask_to_irq */
+		-1, -1, -1, 12, -1, -1,  1,  6,	/* mask 0-7   */
+		 3,  7, -1, -1,  5, -1, -1,  4,	/* mask 8-15  */
+		 9, 10, 11, -1, -1, 14, 15, -1,	/* mask 16-23 */
+		-1, -1, -1, -1, 28, -1, -1, -1,	/* mask 24-31 */
+		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
+		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
+		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
+		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
+	},
+	-1,
+	lynx_update_irq_hw,
+	lynx_ack_irq_hw
+};
+
+static void __init
+lynx_init_irq(void)
+{
+	sable_lynx_irq_swizzle = &lynx_irq_swizzle;
+	sable_lynx_init_irq(64);
+}
+
+/*
+ * PCI Fixup configuration for ALPHA LYNX (2100A)
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot     Device
+ *  0       none
+ *  1       none
+ *  2       PCI-EISA bridge
+ *  3       PCI-PCI bridge
+ *  4       NCR 810 (Demi-Lynx only)
+ *  5       none
+ *  6       PCI on board slot 4
+ *  7       PCI on board slot 5
+ *  8       PCI on board slot 6
+ *  9       PCI on board slot 7
+ *
+ * And behind the PPB we have:
+ *
+ * 11       PCI on board slot 0
+ * 12       PCI on board slot 1
+ * 13       PCI on board slot 2
+ * 14       PCI on board slot 3
+ */
+/*
+ * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
+ * with the values in the irq swizzling tables above.
+ */
+
+static int
+lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[19][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 13,  PCEB   */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 14,  PPB    */
+		{   28,    28,    28,    28,    28},  /* IdSel 15,  NCR demi */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none   */
+		{   32,    32,    33,    34,    35},  /* IdSel 17,  slot 4 */
+		{   36,    36,    37,    38,    39},  /* IdSel 18,  slot 5 */
+		{   40,    40,    41,    42,    43},  /* IdSel 19,  slot 6 */
+		{   44,    44,    45,    46,    47},  /* IdSel 20,  slot 7 */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 22,  none   */
+		/* The following are actually behind the PPB. */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16   none */
+		{   28,    28,    28,    28,    28},  /* IdSel 17   NCR lynx */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18   none */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19   none */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20   none */
+		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21   none */
+		{   48,    48,    49,    50,    51},  /* IdSel 22   slot 0 */
+		{   52,    52,    53,    54,    55},  /* IdSel 23   slot 1 */
+		{   56,    56,    57,    58,    59},  /* IdSel 24   slot 2 */
+		{   60,    60,    61,    62,    63}   /* IdSel 25   slot 3 */
+	};
+	const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8
+lynx_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	int slot, pin = *pinp;
+
+	if (dev->bus->number == 0) {
+		slot = PCI_SLOT(dev->devfn);
+	}
+	/* Check for the built-in bridge */
+	else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
+		slot = PCI_SLOT(dev->devfn) + 11;
+	}
+	else
+	{
+		/* Must be a card-based bridge.  */
+		do {
+			if (PCI_SLOT(dev->bus->self->devfn) == 3) {
+				slot = PCI_SLOT(dev->devfn) + 11;
+				break;
+			}
+			pin = pci_swizzle_interrupt_pin(dev, pin);
+
+			/* Move up the chain of bridges.  */
+			dev = dev->bus->self;
+			/* Slot of the next bridge.  */
+			slot = PCI_SLOT(dev->devfn);
+		} while (dev->bus->self);
+	}
+	*pinp = pin;
+	return slot;
+}
+
+#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
+
+/***********************************************************************/
+/* GENERIC irq routines */
+
+static inline void
+sable_lynx_enable_irq(struct irq_data *d)
+{
+	unsigned long bit, mask;
+
+	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
+	spin_lock(&sable_lynx_irq_lock);
+	mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit);
+	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
+	spin_unlock(&sable_lynx_irq_lock);
+#if 0
+	printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
+	       __func__, mask, bit, irq);
+#endif
+}
+
+static void
+sable_lynx_disable_irq(struct irq_data *d)
+{
+	unsigned long bit, mask;
+
+	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
+	spin_lock(&sable_lynx_irq_lock);
+	mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
+	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
+	spin_unlock(&sable_lynx_irq_lock);
+#if 0
+	printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
+	       __func__, mask, bit, irq);
+#endif
+}
+
+static void
+sable_lynx_mask_and_ack_irq(struct irq_data *d)
+{
+	unsigned long bit, mask;
+
+	bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
+	spin_lock(&sable_lynx_irq_lock);
+	mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
+	sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
+	sable_lynx_irq_swizzle->ack_irq_hw(bit);
+	spin_unlock(&sable_lynx_irq_lock);
+}
+
+static struct irq_chip sable_lynx_irq_type = {
+	.name		= "SABLE/LYNX",
+	.irq_unmask	= sable_lynx_enable_irq,
+	.irq_mask	= sable_lynx_disable_irq,
+	.irq_mask_ack	= sable_lynx_mask_and_ack_irq,
+};
+
+static void 
+sable_lynx_srm_device_interrupt(unsigned long vector)
+{
+	/* Note that the vector reported by the SRM PALcode corresponds
+	   to the interrupt mask bits, but we have to manage via the
+	   so-called legacy IRQs for many common devices.  */
+
+	int bit, irq;
+
+	bit = (vector - 0x800) >> 4;
+	irq = sable_lynx_irq_swizzle->mask_to_irq[bit];
+#if 0
+	printk("%s: vector 0x%lx bit 0x%x irq 0x%x\n",
+	       __func__, vector, bit, irq);
+#endif
+	handle_irq(irq);
+}
+
+static void __init
+sable_lynx_init_irq(int nr_of_irqs)
+{
+	long i;
+
+	for (i = 0; i < nr_of_irqs; ++i) {
+		irq_set_chip_and_handler(i, &sable_lynx_irq_type,
+					 handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	common_init_isa_dma();
+}
+
+static void __init
+sable_lynx_init_pci(void)
+{
+	common_init_pci();
+}
+
+/*****************************************************************/
+/*
+ * The System Vectors
+ *
+ * In order that T2_HAE_ADDRESS should be a constant, we play
+ * these games with GAMMA_BIAS.
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || \
+    (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
+#undef GAMMA_BIAS
+#define GAMMA_BIAS 0
+struct alpha_machine_vector sable_mv __initmv = {
+	.vector_name		= "Sable",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_T2_IO,
+	.machine_check		= t2_machine_check,
+	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= T2_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 40,
+	.device_interrupt	= sable_lynx_srm_device_interrupt,
+
+	.init_arch		= t2_init_arch,
+	.init_irq		= sable_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= sable_lynx_init_pci,
+	.kill_arch		= t2_kill_arch,
+	.pci_map_irq		= sable_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .t2 = {
+	    .gamma_bias		= 0
+	} }
+};
+ALIAS_MV(sable)
+#endif /* GENERIC || (SABLE && !GAMMA) */
+
+#if defined(CONFIG_ALPHA_GENERIC) || \
+    (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
+#undef GAMMA_BIAS
+#define GAMMA_BIAS _GAMMA_BIAS
+struct alpha_machine_vector sable_gamma_mv __initmv = {
+	.vector_name		= "Sable-Gamma",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_T2_IO,
+	.machine_check		= t2_machine_check,
+	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= T2_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 40,
+	.device_interrupt	= sable_lynx_srm_device_interrupt,
+
+	.init_arch		= t2_init_arch,
+	.init_irq		= sable_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= sable_lynx_init_pci,
+	.kill_arch		= t2_kill_arch,
+	.pci_map_irq		= sable_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .t2 = {
+	    .gamma_bias		= _GAMMA_BIAS
+	} }
+};
+ALIAS_MV(sable_gamma)
+#endif /* GENERIC || (SABLE && GAMMA) */
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
+#undef GAMMA_BIAS
+#define GAMMA_BIAS _GAMMA_BIAS
+struct alpha_machine_vector lynx_mv __initmv = {
+	.vector_name		= "Lynx",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_T2_IO,
+	.machine_check		= t2_machine_check,
+	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= EISA_DEFAULT_IO_BASE,
+	.min_mem_address	= T2_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 64,
+	.device_interrupt	= sable_lynx_srm_device_interrupt,
+
+	.init_arch		= t2_init_arch,
+	.init_irq		= lynx_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= sable_lynx_init_pci,
+	.kill_arch		= t2_kill_arch,
+	.pci_map_irq		= lynx_map_irq,
+	.pci_swizzle		= lynx_swizzle,
+
+	.sys = { .t2 = {
+	    .gamma_bias		= _GAMMA_BIAS
+	} }
+};
+ALIAS_MV(lynx)
+#endif /* GENERIC || LYNX */
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
new file mode 100644
index 0000000000..7c420d8dac
--- /dev/null
+++ b/arch/alpha/kernel/sys_sio.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_sio.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code for all boards that route the PCI interrupts through the SIO
+ * PCI/ISA bridge.  This includes Noname (AXPpci33), Multia (UDB),
+ * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/screen_info.h>
+
+#include <asm/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_apecs.h>
+#include <asm/core_lca.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+#include "pc873xx.h"
+
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+/* Save LCA configuration data as the console had it set up.  */
+struct 
+{
+	unsigned int orig_route_tab; /* for SAVE/RESTORE */
+} saved_config __attribute((common));
+#endif
+
+
+static void __init
+sio_init_irq(void)
+{
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = srm_device_interrupt;
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+}
+
+static inline void __init
+alphabook1_init_arch(void)
+{
+	/* The AlphaBook1 has LCD video fixed at 800x600,
+	   37 rows and 100 cols. */
+	screen_info.orig_y = 37;
+	screen_info.orig_video_cols = 100;
+	screen_info.orig_video_lines = 37;
+
+	lca_init_arch();
+}
+
+
+/*
+ * sio_route_tab selects irq routing in PCI/ISA bridge so that:
+ *		PIRQ0 -> irq 15
+ *		PIRQ1 -> irq  9
+ *		PIRQ2 -> irq 10
+ *		PIRQ3 -> irq 11
+ *
+ * This probably ought to be configurable via MILO.  For
+ * example, sound boards seem to like using IRQ 9.
+ *
+ * This is NOT how we should do it. PIRQ0-X should have
+ * their own IRQs, the way intel uses the IO-APIC IRQs.
+ */
+
+static void __init
+sio_pci_route(void)
+{
+	unsigned int orig_route_tab;
+
+	/* First, ALWAYS read and print the original setting. */
+	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
+				  &orig_route_tab);
+	printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
+	       orig_route_tab, alpha_mv.sys.sio.route_tab);
+
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+	saved_config.orig_route_tab = orig_route_tab;
+#endif
+
+	/* Now override with desired setting. */
+	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
+				   alpha_mv.sys.sio.route_tab);
+}
+
+static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
+{
+	if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
+	    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
+		return false;
+
+	return true;
+}
+
+static unsigned int __init
+sio_collect_irq_levels(void)
+{
+	unsigned int level_bits = 0;
+	struct pci_dev *dev = NULL;
+
+	/* Iterate through the devices, collecting IRQ levels.  */
+	for_each_pci_dev(dev) {
+		if (!sio_pci_dev_irq_needs_level(dev))
+			continue;
+
+		if (dev->irq)
+			level_bits |= (1 << dev->irq);
+	}
+	return level_bits;
+}
+
+static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
+{
+	unsigned int old_level_bits;
+
+	/*
+	 * Now, make all PCI interrupts level sensitive.  Notice:
+	 * these registers must be accessed byte-wise.  inw()/outw()
+	 * don't work.
+	 *
+	 * Make sure to turn off any level bits set for IRQs 9,10,11,15,
+	 *  so that the only bits getting set are for devices actually found.
+	 * Note that we do preserve the remainder of the bits, which we hope
+	 *  will be set correctly by ARC/SRM.
+	 *
+	 * Note: we at least preserve any level-set bits on AlphaBook1
+	 */
+	old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
+
+	if (reset)
+		old_level_bits &= 0x71ff;
+
+	level_bits |= old_level_bits;
+
+	outb((level_bits >> 0) & 0xff, 0x4d0);
+	outb((level_bits >> 8) & 0xff, 0x4d1);
+}
+
+static inline void
+sio_fixup_irq_levels(unsigned int level_bits)
+{
+	__sio_fixup_irq_levels(level_bits, true);
+}
+
+static inline int
+noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	/*
+	 * The Noname board has 5 PCI slots with each of the 4
+	 * interrupt pins routed to different pins on the PCI/ISA
+	 * bridge (PIRQ0-PIRQ3).  The table below is based on
+	 * information available at:
+	 *
+	 *   http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
+	 *
+	 * I have no information on the Avanti interrupt routing, but
+	 * the routing seems to be identical to the Noname except
+	 * that the Avanti has an additional slot whose routing I'm
+	 * unsure of.
+	 *
+	 * pirq_tab[0] is a fake entry to deal with old PCI boards
+	 * that have the interrupt pin number hardwired to 0 (meaning
+	 * that they use the default INTA line, if they are interrupt
+	 * driven at all).
+	 */
+	static char irq_tab[][5] = {
+		/*INT A   B   C   D */
+		{ 3,  3,  3,  3,  3}, /* idsel  6 (53c810) */ 
+		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
+		{ 2,  2, -1, -1, -1}, /* idsel  8 (Hack: slot closest ISA) */
+		{-1, -1, -1, -1, -1}, /* idsel  9 (unused) */
+		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
+		{ 0,  0,  2,  1,  0}, /* idsel 11 KN25_PCI_SLOT0 */
+		{ 1,  1,  0,  2,  1}, /* idsel 12 KN25_PCI_SLOT1 */
+		{ 2,  2,  1,  0,  2}, /* idsel 13 KN25_PCI_SLOT2 */
+		{ 0,  0,  0,  0,  0}, /* idsel 14 AS255 TULIP */
+	};
+	const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
+	int irq = COMMON_TABLE_LOOKUP, tmp;
+	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
+
+	irq = irq >= 0 ? tmp : -1;
+
+	/* Fixup IRQ level if an actual IRQ mapping is detected */
+	if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
+		__sio_fixup_irq_levels(1 << irq, false);
+
+	return irq;
+}
+
+static inline int
+p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[][5] = {
+		/*INT A   B   C   D */
+		{ 0,  0, -1, -1, -1}, /* idsel  6 (53c810) */
+		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
+		{ 1,  1,  2,  3,  0}, /* idsel  8 (slot A) */
+		{ 2,  2,  3,  0,  1}, /* idsel  9 (slot B) */
+		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
+		{-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
+		{ 3,  3, -1, -1, -1}, /* idsel 12 (CMD0646) */
+	};
+	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
+	int irq = COMMON_TABLE_LOOKUP, tmp;
+	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
+	return irq >= 0 ? tmp : -1;
+}
+
+static inline void __init
+noname_init_pci(void)
+{
+	common_init_pci();
+	sio_pci_route();
+	sio_fixup_irq_levels(sio_collect_irq_levels());
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
+}
+
+static inline void __init
+alphabook1_init_pci(void)
+{
+	struct pci_dev *dev;
+	unsigned char orig, config;
+
+	common_init_pci();
+	sio_pci_route();
+
+	/*
+	 * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
+	 * is sensitive to PCI bus bursts, so we must DISABLE
+	 * burst mode for the NCR 8xx SCSI... :-(
+	 *
+	 * Note that the NCR810 SCSI driver must preserve the
+	 * setting of the bit in order for this to work.  At the
+	 * moment (2.0.29), ncr53c8xx.c does NOT do this, but
+	 * 53c7,8xx.c DOES.
+	 */
+
+	dev = NULL;
+	while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
+		if (dev->device == PCI_DEVICE_ID_NCR_53C810
+		    || dev->device == PCI_DEVICE_ID_NCR_53C815
+		    || dev->device == PCI_DEVICE_ID_NCR_53C820
+		    || dev->device == PCI_DEVICE_ID_NCR_53C825) {
+			unsigned long io_port;
+			unsigned char ctest4;
+
+			io_port = dev->resource[0].start;
+			ctest4 = inb(io_port+0x21);
+			if (!(ctest4 & 0x80)) {
+				printk("AlphaBook1 NCR init: setting"
+				       " burst disable\n");
+				outb(ctest4 | 0x80, io_port+0x21);
+			}
+                }
+	}
+
+	/* Do not set *ANY* level triggers for AlphaBook1. */
+	sio_fixup_irq_levels(0);
+
+	/* Make sure that register PR1 indicates 1Mb mem */
+	outb(0x0f, 0x3ce); orig = inb(0x3cf);   /* read PR5  */
+	outb(0x0f, 0x3ce); outb(0x05, 0x3cf);   /* unlock PR0-4 */
+	outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
+	if ((config & 0xc0) != 0xc0) {
+		printk("AlphaBook1 VGA init: setting 1Mb memory\n");
+		config |= 0xc0;
+		outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
+	}
+	outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
+}
+
+void
+sio_kill_arch(int mode)
+{
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+	/* Since we cannot read the PCI DMA Window CSRs, we
+	 * cannot restore them here.
+	 *
+	 * However, we CAN read the PIRQ route register, so restore it
+	 * now...
+	 */
+ 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
+				   saved_config.orig_route_tab);
+#endif
+}
+
+
+/*
+ * The System Vectors
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
+struct alpha_machine_vector alphabook1_mv __initmv = {
+	.vector_name		= "AlphaBook1",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= isa_device_interrupt,
+
+	.init_arch		= alphabook1_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= alphabook1_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= noname_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		/* NCR810 SCSI is 14, PCMCIA controller is 15.  */
+		.route_tab	= 0x0e0f0a0a,
+	}}
+};
+ALIAS_MV(alphabook1)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI)
+struct alpha_machine_vector avanti_mv __initmv = {
+	.vector_name		= "Avanti",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= isa_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= noname_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		.route_tab	= 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
+	}}
+};
+ALIAS_MV(avanti)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME)
+struct alpha_machine_vector noname_mv __initmv = {
+	.vector_name		= "Noname",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= srm_device_interrupt,
+
+	.init_arch		= lca_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= noname_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		/* For UDB, the only available PCI slot must not map to IRQ 9,
+		   since that's the builtin MSS sound chip. That PCI slot
+		   will map to PIRQ1 (for INTA at least), so we give it IRQ 15
+		   instead.
+
+		   Unfortunately we have to do this for NONAME as well, since
+		   they are co-indicated when the platform type "Noname" is
+		   selected... :-(  */
+
+		.route_tab	= 0x0b0a0f0d,
+	}}
+};
+ALIAS_MV(noname)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
+struct alpha_machine_vector p2k_mv __initmv = {
+	.vector_name		= "Platform2000",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= srm_device_interrupt,
+
+	.init_arch		= lca_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= p2k_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		.route_tab	= 0x0b0a090f,
+	}}
+};
+ALIAS_MV(p2k)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
+struct alpha_machine_vector xl_mv __initmv = {
+	.vector_name		= "XL",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_XL_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= XL_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= isa_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= noname_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		.route_tab	= 0x0b0a090f,
+	}}
+};
+ALIAS_MV(xl)
+#endif
diff --git a/arch/alpha/kernel/sys_sx164.c b/arch/alpha/kernel/sys_sx164.c
new file mode 100644
index 0000000000..dd9de84b63
--- /dev/null
+++ b/arch/alpha/kernel/sys_sx164.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_sx164.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999, 2000 Richard Henderson
+ *
+ * Code supporting the SX164 (PCA56+PYXIS).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_cia.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+#include <asm/special_insns.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+static void __init
+sx164_init_irq(void)
+{
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+	outb(0, DMA2_MASK_REG);
+
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = srm_device_interrupt;
+
+	init_i8259a_irqs();
+
+	/* Not interested in the bogus interrupts (0,3,4,5,40-47),
+	   NMI (1), or HALT (2).  */
+	if (alpha_using_srm)
+		init_srm_irqs(40, 0x3f0000);
+	else
+		init_pyxis_irqs(0xff00003f0000UL);
+
+	if (request_irq(16 + 6, no_action, 0, "timer-cascade", NULL))
+		pr_err("Failed to register timer-cascade interrupt\n");
+}
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ PYXIS_INT_REQ:
+ * Bit      Meaning
+ * 0        RSVD
+ * 1        NMI
+ * 2        Halt/Reset switch
+ * 3        MBZ
+ * 4        RAZ
+ * 5        RAZ
+ * 6        Interval timer (RTC)
+ * 7        PCI-ISA Bridge
+ * 8        Interrupt Line A from slot 3
+ * 9        Interrupt Line A from slot 2
+ *10        Interrupt Line A from slot 1
+ *11        Interrupt Line A from slot 0
+ *12        Interrupt Line B from slot 3
+ *13        Interrupt Line B from slot 2
+ *14        Interrupt Line B from slot 1
+ *15        Interrupt line B from slot 0
+ *16        Interrupt Line C from slot 3
+ *17        Interrupt Line C from slot 2
+ *18        Interrupt Line C from slot 1
+ *19        Interrupt Line C from slot 0
+ *20        Interrupt Line D from slot 3
+ *21        Interrupt Line D from slot 2
+ *22        Interrupt Line D from slot 1
+ *23        Interrupt Line D from slot 0
+ *
+ * IdSel       
+ *   5  32 bit PCI option slot 2
+ *   6  64 bit PCI option slot 0
+ *   7  64 bit PCI option slot 1
+ *   8  Cypress I/O
+ *   9  32 bit PCI option slot 3
+ */
+
+static int
+sx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[5][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{ 16+ 9, 16+ 9, 16+13, 16+17, 16+21}, /* IdSel 5 slot 2 J17 */
+		{ 16+11, 16+11, 16+15, 16+19, 16+23}, /* IdSel 6 slot 0 J19 */
+		{ 16+10, 16+10, 16+14, 16+18, 16+22}, /* IdSel 7 slot 1 J18 */
+		{    -1,    -1,    -1,	  -1,    -1}, /* IdSel 8 SIO        */
+		{ 16+ 8, 16+ 8, 16+12, 16+16, 16+20}  /* IdSel 9 slot 3 J15 */
+	};
+	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static void __init
+sx164_init_pci(void)
+{
+	cia_init_pci();
+	SMC669_Init(0);
+}
+
+static void __init
+sx164_init_arch(void)
+{
+	/*
+	 * OSF palcode v1.23 forgets to enable PCA56 Motion Video
+	 * Instructions. Let's enable it.
+	 * We have to check palcode revision because CSERVE interface
+	 * is subject to change without notice. For example, it
+	 * has been changed completely since v1.16 (found in MILO
+	 * distribution). -ink
+	 */
+	struct percpu_struct *cpu = (struct percpu_struct*)
+		((char*)hwrpb + hwrpb->processor_offset);
+
+	if (amask(AMASK_MAX) != 0
+	    && alpha_using_srm
+	    && (cpu->pal_revision & 0xffff) <= 0x117) {
+		__asm__ __volatile__(
+		"lda	$16,8($31)\n"
+		"call_pal 9\n"		/* Allow PALRES insns in kernel mode */
+		".long  0x64000118\n\n"	/* hw_mfpr $0,icsr */
+		"ldah	$16,(1<<(19-16))($31)\n"
+		"or	$0,$16,$0\n"	/* set MVE bit */
+		".long  0x74000118\n"	/* hw_mtpr $0,icsr */
+		"lda	$16,9($31)\n"
+		"call_pal 9"		/* Disable PALRES insns */
+		: : : "$0", "$16");
+		printk("PCA56 MVI set enabled\n");
+	}
+
+	pyxis_init_arch();
+}
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector sx164_mv __initmv = {
+	.vector_name		= "SX164",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_PYXIS_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= PYXIS_DAC_OFFSET,
+
+	.nr_irqs		= 48,
+	.device_interrupt	= pyxis_device_interrupt,
+
+	.init_arch		= sx164_init_arch,
+	.init_irq		= sx164_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= sx164_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= sx164_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(sx164)
diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c
new file mode 100644
index 0000000000..9e2adb69bc
--- /dev/null
+++ b/arch/alpha/kernel/sys_takara.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_takara.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the TAKARA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+#include "pc873xx.h"
+
+/* Note mask bit is true for DISABLED irqs.  */
+static unsigned long cached_irq_mask[2] = { -1, -1 };
+
+static inline void
+takara_update_irq_hw(unsigned long irq, unsigned long mask)
+{
+	int regaddr;
+
+	mask = (irq >= 64 ? mask << 16 : mask >> ((irq - 16) & 0x30));
+	regaddr = 0x510 + (((irq - 16) >> 2) & 0x0c);
+	outl(mask & 0xffff0000UL, regaddr);
+}
+
+static inline void
+takara_enable_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	unsigned long mask;
+	mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
+	takara_update_irq_hw(irq, mask);
+}
+
+static void
+takara_disable_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	unsigned long mask;
+	mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
+	takara_update_irq_hw(irq, mask);
+}
+
+static struct irq_chip takara_irq_type = {
+	.name		= "TAKARA",
+	.irq_unmask	= takara_enable_irq,
+	.irq_mask	= takara_disable_irq,
+	.irq_mask_ack	= takara_disable_irq,
+};
+
+static void
+takara_device_interrupt(unsigned long vector)
+{
+	unsigned intstatus;
+
+	/*
+	 * The PALcode will have passed us vectors 0x800 or 0x810,
+	 * which are fairly arbitrary values and serve only to tell
+	 * us whether an interrupt has come in on IRQ0 or IRQ1. If
+	 * it's IRQ1 it's a PCI interrupt; if it's IRQ0, it's
+	 * probably ISA, but PCI interrupts can come through IRQ0
+	 * as well if the interrupt controller isn't in accelerated
+	 * mode.
+	 *
+	 * OTOH, the accelerator thing doesn't seem to be working
+	 * overly well, so what we'll do instead is try directly
+	 * examining the Master Interrupt Register to see if it's a
+	 * PCI interrupt, and if _not_ then we'll pass it on to the
+	 * ISA handler.
+	 */
+
+	intstatus = inw(0x500) & 15;
+	if (intstatus) {
+		/*
+		 * This is a PCI interrupt. Check each bit and
+		 * despatch an interrupt if it's set.
+		 */
+
+		if (intstatus & 8) handle_irq(16+3);
+		if (intstatus & 4) handle_irq(16+2);
+		if (intstatus & 2) handle_irq(16+1);
+		if (intstatus & 1) handle_irq(16+0);
+	} else {
+		isa_device_interrupt (vector);
+	}
+}
+
+static void 
+takara_srm_device_interrupt(unsigned long vector)
+{
+	int irq = (vector - 0x800) >> 4;
+	handle_irq(irq);
+}
+
+static void __init
+takara_init_irq(void)
+{
+	long i;
+
+	init_i8259a_irqs();
+
+	if (alpha_using_srm) {
+		alpha_mv.device_interrupt = takara_srm_device_interrupt;
+	} else {
+		unsigned int ctlreg = inl(0x500);
+
+		/* Return to non-accelerated mode.  */
+		ctlreg &= ~0x8000;
+		outl(ctlreg, 0x500);
+
+		/* Enable the PCI interrupt register.  */
+		ctlreg = 0x05107c00;
+		outl(ctlreg, 0x500);
+	}
+
+	for (i = 16; i < 128; i += 16)
+		takara_update_irq_hw(i, -1);
+
+	for (i = 16; i < 128; ++i) {
+		irq_set_chip_and_handler(i, &takara_irq_type,
+					 handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+
+	common_init_isa_dma();
+}
+
+
+/*
+ * The Takara has PCI devices 1, 2, and 3 configured to slots 20,
+ * 19, and 18 respectively, in the default configuration. They can
+ * also be jumpered to slots 8, 7, and 6 respectively, which is fun
+ * because the SIO ISA bridge can also be slot 7. However, the SIO
+ * doesn't explicitly generate PCI-type interrupts, so we can
+ * assign it whatever the hell IRQ we like and it doesn't matter.
+ */
+
+static int
+takara_map_irq_srm(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[15][5] = {
+		{ 16+3, 16+3, 16+3, 16+3, 16+3},   /* slot  6 == device 3 */
+		{ 16+2, 16+2, 16+2, 16+2, 16+2},   /* slot  7 == device 2 */
+		{ 16+1, 16+1, 16+1, 16+1, 16+1},   /* slot  8 == device 1 */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot  9 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 10 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 11 == nothing */
+		/* These are behind the bridges.  */
+		{   12,   12,   13,   14,   15},   /* slot 12 == nothing */
+		{    8,    8,    9,   19,   11},   /* slot 13 == nothing */
+		{    4,    4,    5,    6,    7},   /* slot 14 == nothing */
+		{    0,    0,    1,    2,    3},   /* slot 15 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 16 == nothing */
+		{64+ 0, 64+0, 64+1, 64+2, 64+3},   /* slot 17= device 4 */
+		{48+ 0, 48+0, 48+1, 48+2, 48+3},   /* slot 18= device 3 */
+		{32+ 0, 32+0, 32+1, 32+2, 32+3},   /* slot 19= device 2 */
+		{16+ 0, 16+0, 16+1, 16+2, 16+3},   /* slot 20= device 1 */
+	};
+	const long min_idsel = 6, max_idsel = 20, irqs_per_slot = 5;
+        int irq = COMMON_TABLE_LOOKUP;
+	if (irq >= 0 && irq < 16) {
+		/* Guess that we are behind a bridge.  */
+		unsigned int busslot = PCI_SLOT(dev->bus->self->devfn);
+		irq += irq_tab[busslot-min_idsel][0];
+	}
+	return irq;
+}
+
+static int __init
+takara_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[15][5] __initdata = {
+		{ 16+3, 16+3, 16+3, 16+3, 16+3},   /* slot  6 == device 3 */
+		{ 16+2, 16+2, 16+2, 16+2, 16+2},   /* slot  7 == device 2 */
+		{ 16+1, 16+1, 16+1, 16+1, 16+1},   /* slot  8 == device 1 */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot  9 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 10 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 11 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 12 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 13 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 14 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 15 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 16 == nothing */
+		{   -1,   -1,   -1,   -1,   -1},   /* slot 17 == nothing */
+		{ 16+3, 16+3, 16+3, 16+3, 16+3},   /* slot 18 == device 3 */
+		{ 16+2, 16+2, 16+2, 16+2, 16+2},   /* slot 19 == device 2 */
+		{ 16+1, 16+1, 16+1, 16+1, 16+1},   /* slot 20 == device 1 */
+	};
+	const long min_idsel = 6, max_idsel = 20, irqs_per_slot = 5;
+	return COMMON_TABLE_LOOKUP;
+}
+
+static u8
+takara_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	int slot = PCI_SLOT(dev->devfn);
+	int pin = *pinp;
+	unsigned int ctlreg = inl(0x500);
+	unsigned int busslot;
+
+	if (!dev->bus->self)
+		return slot;
+
+	busslot = PCI_SLOT(dev->bus->self->devfn);
+	/* Check for built-in bridges.  */
+	if (dev->bus->number != 0
+	    && busslot > 16
+	    && ((1<<(36-busslot)) & ctlreg)) {
+		if (pin == 1)
+			pin += (20 - busslot);
+		else {
+			printk(KERN_WARNING "takara_swizzle: can only "
+			       "handle cards with INTA IRQ pin.\n");
+		}
+	} else {
+		/* Must be a card-based bridge.  */
+		printk(KERN_WARNING "takara_swizzle: cannot handle "
+		       "card-bridge behind builtin bridge yet.\n");
+	}
+
+	*pinp = pin;
+	return slot;
+}
+
+static void __init
+takara_init_pci(void)
+{
+	if (alpha_using_srm)
+		alpha_mv.pci_map_irq = takara_map_irq_srm;
+
+	cia_init_pci();
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+		pc873xx_enable_ide();
+	}
+}
+
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector takara_mv __initmv = {
+	.vector_name		= "Takara",
+	DO_EV5_MMU,
+	DO_DEFAULT_RTC,
+	DO_CIA_IO,
+	.machine_check		= cia_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 128,
+	.device_interrupt	= takara_device_interrupt,
+
+	.init_arch		= cia_init_arch,
+	.init_irq		= takara_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= takara_init_pci,
+	.kill_arch		= cia_kill_arch,
+	.pci_map_irq		= takara_map_irq,
+	.pci_swizzle		= takara_swizzle,
+};
+ALIAS_MV(takara)
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
new file mode 100644
index 0000000000..b1f3b4fcf9
--- /dev/null
+++ b/arch/alpha/kernel/sys_titan.c
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/sys_titan.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996, 1999 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *      Copyright (C) 1999, 2000 Jeff Wiedemeier
+ *
+ * Code supporting TITAN systems (EV6+TITAN), currently:
+ *      Privateer
+ *	Falcon
+ *	Granite
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_titan.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+#include "err_impl.h"
+
+
+/*
+ * Titan generic
+ */
+
+/*
+ * Titan supports up to 4 CPUs
+ */
+static unsigned long titan_cpu_irq_affinity[4] = { ~0UL, ~0UL, ~0UL, ~0UL };
+
+/*
+ * Mask is set (1) if enabled
+ */
+static unsigned long titan_cached_irq_mask;
+
+/*
+ * Need SMP-safe access to interrupt CSRs
+ */
+DEFINE_SPINLOCK(titan_irq_lock);
+
+static void
+titan_update_irq_hw(unsigned long mask)
+{
+	register titan_cchip *cchip = TITAN_cchip;
+	unsigned long isa_enable = 1UL << 55;
+	register int bcpu = boot_cpuid;
+
+#ifdef CONFIG_SMP
+	cpumask_t cpm;
+	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
+	unsigned long mask0, mask1, mask2, mask3, dummy;
+
+	cpumask_copy(&cpm, cpu_present_mask);
+	mask &= ~isa_enable;
+	mask0 = mask & titan_cpu_irq_affinity[0];
+	mask1 = mask & titan_cpu_irq_affinity[1];
+	mask2 = mask & titan_cpu_irq_affinity[2];
+	mask3 = mask & titan_cpu_irq_affinity[3];
+
+	if (bcpu == 0) mask0 |= isa_enable;
+	else if (bcpu == 1) mask1 |= isa_enable;
+	else if (bcpu == 2) mask2 |= isa_enable;
+	else mask3 |= isa_enable;
+
+	dim0 = &cchip->dim0.csr;
+	dim1 = &cchip->dim1.csr;
+	dim2 = &cchip->dim2.csr;
+	dim3 = &cchip->dim3.csr;
+	if (!cpumask_test_cpu(0, &cpm)) dim0 = &dummy;
+	if (!cpumask_test_cpu(1, &cpm)) dim1 = &dummy;
+	if (!cpumask_test_cpu(2, &cpm)) dim2 = &dummy;
+	if (!cpumask_test_cpu(3, &cpm)) dim3 = &dummy;
+
+	*dim0 = mask0;
+	*dim1 = mask1;
+	*dim2 = mask2;
+	*dim3 = mask3;
+	mb();
+	*dim0;
+	*dim1;
+	*dim2;
+	*dim3;
+#else
+	volatile unsigned long *dimB;
+	dimB = &cchip->dim0.csr;
+	if (bcpu == 1) dimB = &cchip->dim1.csr;
+	else if (bcpu == 2) dimB = &cchip->dim2.csr;
+	else if (bcpu == 3) dimB = &cchip->dim3.csr;
+
+	*dimB = mask | isa_enable;
+	mb();
+	*dimB;
+#endif
+}
+
+static inline void
+titan_enable_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	spin_lock(&titan_irq_lock);
+	titan_cached_irq_mask |= 1UL << (irq - 16);
+	titan_update_irq_hw(titan_cached_irq_mask);
+	spin_unlock(&titan_irq_lock);
+}
+
+static inline void
+titan_disable_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+	spin_lock(&titan_irq_lock);
+	titan_cached_irq_mask &= ~(1UL << (irq - 16));
+	titan_update_irq_hw(titan_cached_irq_mask);
+	spin_unlock(&titan_irq_lock);
+}
+
+static void
+titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < 4; cpu++) {
+		if (cpumask_test_cpu(cpu, &affinity))
+			titan_cpu_irq_affinity[cpu] |= 1UL << irq;
+		else
+			titan_cpu_irq_affinity[cpu] &= ~(1UL << irq);
+	}
+
+}
+
+static int
+titan_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
+		       bool force)
+{ 
+	unsigned int irq = d->irq;
+	spin_lock(&titan_irq_lock);
+	titan_cpu_set_irq_affinity(irq - 16, *affinity);
+	titan_update_irq_hw(titan_cached_irq_mask);
+	spin_unlock(&titan_irq_lock);
+
+	return 0;
+}
+
+static void
+titan_device_interrupt(unsigned long vector)
+{
+	printk("titan_device_interrupt: NOT IMPLEMENTED YET!!\n");
+}
+
+static void 
+titan_srm_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+	handle_irq(irq);
+}
+
+
+static void __init
+init_titan_irqs(struct irq_chip * ops, int imin, int imax)
+{
+	long i;
+	for (i = imin; i <= imax; ++i) {
+		irq_set_chip_and_handler(i, ops, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
+}
+
+static struct irq_chip titan_irq_type = {
+       .name			= "TITAN",
+       .irq_unmask		= titan_enable_irq,
+       .irq_mask		= titan_disable_irq,
+       .irq_mask_ack		= titan_disable_irq,
+       .irq_set_affinity	= titan_set_irq_affinity,
+};
+
+static irqreturn_t
+titan_intr_nop(int irq, void *dev_id)
+{
+      /*
+       * This is a NOP interrupt handler for the purposes of
+       * event counting -- just return.
+       */                                                                     
+       return IRQ_HANDLED;
+}
+
+static void __init
+titan_init_irq(void)
+{
+	if (alpha_using_srm && !alpha_mv.device_interrupt)
+		alpha_mv.device_interrupt = titan_srm_device_interrupt;
+	if (!alpha_mv.device_interrupt)
+		alpha_mv.device_interrupt = titan_device_interrupt;
+
+	titan_update_irq_hw(0);
+
+	init_titan_irqs(&titan_irq_type, 16, 63 + 16);
+}
+  
+static void __init
+titan_legacy_init_irq(void)
+{
+	/* init the legacy dma controller */
+	outb(0, DMA1_RESET_REG);
+	outb(0, DMA2_RESET_REG);
+	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+	outb(0, DMA2_MASK_REG);
+
+	/* init the legacy irq controller */
+	init_i8259a_irqs();
+
+	/* init the titan irqs */
+	titan_init_irq();
+}
+
+void
+titan_dispatch_irqs(u64 mask)
+{
+	unsigned long vector;
+
+	/*
+	 * Mask down to those interrupts which are enable on this processor
+	 */
+	mask &= titan_cpu_irq_affinity[smp_processor_id()];
+
+	/*
+	 * Dispatch all requested interrupts 
+	 */
+	while (mask) {
+		/* convert to SRM vector... priority is <63> -> <0> */
+		vector = 63 - __kernel_ctlz(mask);
+		mask &= ~(1UL << vector);	/* clear it out 	 */
+		vector = 0x900 + (vector << 4);	/* convert to SRM vector */
+		
+		/* dispatch it */
+		alpha_mv.device_interrupt(vector);
+	}
+}
+  
+
+/*
+ * Titan Family
+ */
+static void __init
+titan_request_irq(unsigned int irq, irq_handler_t handler,
+		  unsigned long irqflags, const char *devname,
+		  void *dev_id)
+{
+	int err;
+	err = request_irq(irq, handler, irqflags, devname, dev_id);
+	if (err) {
+		printk("titan_request_irq for IRQ %d returned %d; ignoring\n",
+		       irq, err);
+	}
+}
+
+static void __init
+titan_late_init(void)
+{
+	/*
+	 * Enable the system error interrupts. These interrupts are 
+	 * all reported to the kernel as machine checks, so the handler
+	 * is a nop so it can be called to count the individual events.
+	 */
+	titan_request_irq(63+16, titan_intr_nop, 0,
+		    "CChip Error", NULL);
+	titan_request_irq(62+16, titan_intr_nop, 0,
+		    "PChip 0 H_Error", NULL);
+	titan_request_irq(61+16, titan_intr_nop, 0,
+		    "PChip 1 H_Error", NULL);
+	titan_request_irq(60+16, titan_intr_nop, 0,
+		    "PChip 0 C_Error", NULL);
+	titan_request_irq(59+16, titan_intr_nop, 0,
+		    "PChip 1 C_Error", NULL);
+
+	/* 
+	 * Register our error handlers.
+	 */
+	titan_register_error_handlers();
+
+	/*
+	 * Check if the console left us any error logs.
+	 */
+	cdl_check_console_data_log();
+
+}
+
+static int
+titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	u8 intline;
+	int irq;
+
+ 	/* Get the current intline.  */
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline);
+	irq = intline;
+
+ 	/* Is it explicitly routed through ISA?  */
+ 	if ((irq & 0xF0) == 0xE0)
+ 		return irq;
+ 
+ 	/* Offset by 16 to make room for ISA interrupts 0 - 15.  */
+ 	return irq + 16;
+}
+
+static void __init
+titan_init_pci(void)
+{
+ 	/*
+ 	 * This isn't really the right place, but there's some init
+ 	 * that needs to be done after everything is basically up.
+ 	 */
+ 	titan_late_init();
+ 
+	/* Indicate that we trust the console to configure things properly */
+	pci_set_flags(PCI_PROBE_ONLY);
+	common_init_pci();
+	SMC669_Init(0);
+	locate_and_init_vga(NULL);
+}
+
+
+/*
+ * Privateer
+ */
+static void __init
+privateer_init_pci(void)
+{
+	/*
+	 * Hook a couple of extra err interrupts that the
+	 * common titan code won't.
+	 */
+	titan_request_irq(53+16, titan_intr_nop, 0,
+		    "NMI", NULL);
+	titan_request_irq(50+16, titan_intr_nop, 0,
+		    "Temperature Warning", NULL);
+
+	/*
+	 * Finish with the common version.
+	 */
+	return titan_init_pci();
+}
+
+
+/*
+ * The System Vectors.
+ */
+struct alpha_machine_vector titan_mv __initmv = {
+	.vector_name		= "TITAN",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TITAN_IO,
+	.machine_check		= titan_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TITAN_DAC_OFFSET,
+
+	.nr_irqs		= 80,	/* 64 + 16 */
+	/* device_interrupt will be filled in by titan_init_irq */
+
+	.agp_info		= titan_agp_info,
+
+	.init_arch		= titan_init_arch,
+	.init_irq		= titan_legacy_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= titan_init_pci,
+
+	.kill_arch		= titan_kill_arch,
+	.pci_map_irq		= titan_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(titan)
+
+struct alpha_machine_vector privateer_mv __initmv = {
+	.vector_name		= "PRIVATEER",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_TITAN_IO,
+	.machine_check		= privateer_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+	.pci_dac_offset		= TITAN_DAC_OFFSET,
+
+	.nr_irqs		= 80,	/* 64 + 16 */
+	/* device_interrupt will be filled in by titan_init_irq */
+
+	.agp_info		= titan_agp_info,
+
+	.init_arch		= titan_init_arch,
+	.init_irq		= titan_legacy_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= privateer_init_pci,
+
+	.kill_arch		= titan_kill_arch,
+	.pci_map_irq		= titan_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+/* No alpha_mv alias for privateer since we compile it 
+   in unconditionally with titan; setup_arch knows how to cope. */
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
new file mode 100644
index 0000000000..3cee05443f
--- /dev/null
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/sys_wildfire.c
+ *
+ *  Wildfire support.
+ *
+ *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/core_wildfire.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+static unsigned long cached_irq_mask[WILDFIRE_NR_IRQS/(sizeof(long)*8)];
+
+DEFINE_SPINLOCK(wildfire_irq_lock);
+
+static int doing_init_irq_hw = 0;
+
+static void
+wildfire_update_irq_hw(unsigned int irq)
+{
+	int qbbno = (irq >> 8) & (WILDFIRE_MAX_QBB - 1);
+	int pcano = (irq >> 6) & (WILDFIRE_PCA_PER_QBB - 1);
+	wildfire_pca *pca;
+	volatile unsigned long * enable0;
+
+	if (!WILDFIRE_PCA_EXISTS(qbbno, pcano)) {
+		if (!doing_init_irq_hw) {
+			printk(KERN_ERR "wildfire_update_irq_hw:"
+			       " got irq %d for non-existent PCA %d"
+			       " on QBB %d.\n",
+			       irq, pcano, qbbno);
+		}
+		return;
+	}
+
+	pca = WILDFIRE_pca(qbbno, pcano);
+	enable0 = (unsigned long *) &pca->pca_int[0].enable; /* ??? */
+
+	*enable0 = cached_irq_mask[qbbno * WILDFIRE_PCA_PER_QBB + pcano];
+	mb();
+	*enable0;
+}
+
+static void __init
+wildfire_init_irq_hw(void)
+{
+#if 0
+	register wildfire_pca * pca = WILDFIRE_pca(0, 0);
+	volatile unsigned long * enable0, * enable1, * enable2, *enable3;
+	volatile unsigned long * target0, * target1, * target2, *target3;
+
+	enable0 = (unsigned long *) &pca->pca_int[0].enable;
+	enable1 = (unsigned long *) &pca->pca_int[1].enable;
+	enable2 = (unsigned long *) &pca->pca_int[2].enable;
+	enable3 = (unsigned long *) &pca->pca_int[3].enable;
+
+	target0 = (unsigned long *) &pca->pca_int[0].target;
+	target1 = (unsigned long *) &pca->pca_int[1].target;
+	target2 = (unsigned long *) &pca->pca_int[2].target;
+	target3 = (unsigned long *) &pca->pca_int[3].target;
+
+	*enable0 = *enable1 = *enable2 = *enable3 = 0;
+
+	*target0 = (1UL<<8) | WILDFIRE_QBB(0);
+	*target1 = *target2 = *target3 = 0;
+
+	mb();
+
+	*enable0; *enable1; *enable2; *enable3;
+	*target0; *target1; *target2; *target3;
+
+#else
+	int i;
+
+	doing_init_irq_hw = 1;
+
+	/* Need to update only once for every possible PCA. */
+	for (i = 0; i < WILDFIRE_NR_IRQS; i+=WILDFIRE_IRQ_PER_PCA)
+		wildfire_update_irq_hw(i);
+
+	doing_init_irq_hw = 0;
+#endif
+}
+
+static void
+wildfire_enable_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if (irq < 16)
+		i8259a_enable_irq(d);
+
+	spin_lock(&wildfire_irq_lock);
+	set_bit(irq, &cached_irq_mask);
+	wildfire_update_irq_hw(irq);
+	spin_unlock(&wildfire_irq_lock);
+}
+
+static void
+wildfire_disable_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if (irq < 16)
+		i8259a_disable_irq(d);
+
+	spin_lock(&wildfire_irq_lock);
+	clear_bit(irq, &cached_irq_mask);
+	wildfire_update_irq_hw(irq);
+	spin_unlock(&wildfire_irq_lock);
+}
+
+static void
+wildfire_mask_and_ack_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if (irq < 16)
+		i8259a_mask_and_ack_irq(d);
+
+	spin_lock(&wildfire_irq_lock);
+	clear_bit(irq, &cached_irq_mask);
+	wildfire_update_irq_hw(irq);
+	spin_unlock(&wildfire_irq_lock);
+}
+
+static struct irq_chip wildfire_irq_type = {
+	.name		= "WILDFIRE",
+	.irq_unmask	= wildfire_enable_irq,
+	.irq_mask	= wildfire_disable_irq,
+	.irq_mask_ack	= wildfire_mask_and_ack_irq,
+};
+
+static void __init
+wildfire_init_irq_per_pca(int qbbno, int pcano)
+{
+	int i, irq_bias;
+
+	irq_bias = qbbno * (WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA)
+		 + pcano * WILDFIRE_IRQ_PER_PCA;
+
+#if 0
+	unsigned long io_bias;
+
+	/* Only need the following for first PCI bus per PCA. */
+	io_bias = WILDFIRE_IO(qbbno, pcano<<1) - WILDFIRE_IO_BIAS;
+
+	outb(0, DMA1_RESET_REG + io_bias);
+	outb(0, DMA2_RESET_REG + io_bias);
+	outb(DMA_MODE_CASCADE, DMA2_MODE_REG + io_bias);
+	outb(0, DMA2_MASK_REG + io_bias);
+#endif
+
+#if 0
+	/* ??? Not sure how to do this, yet... */
+	init_i8259a_irqs(); /* ??? */
+#endif
+
+	for (i = 0; i < 16; ++i) {
+		if (i == 2)
+			continue;
+		irq_set_chip_and_handler(i + irq_bias, &wildfire_irq_type,
+					 handle_level_irq);
+		irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
+	}
+
+	irq_set_chip_and_handler(36 + irq_bias, &wildfire_irq_type,
+				 handle_level_irq);
+	irq_set_status_flags(36 + irq_bias, IRQ_LEVEL);
+	for (i = 40; i < 64; ++i) {
+		irq_set_chip_and_handler(i + irq_bias, &wildfire_irq_type,
+					 handle_level_irq);
+		irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
+	}
+
+	if (request_irq(32 + irq_bias, no_action, 0, "isa_enable", NULL))
+		pr_err("Failed to register isa_enable interrupt\n");
+}
+
+static void __init
+wildfire_init_irq(void)
+{
+	int qbbno, pcano;
+
+#if 1
+	wildfire_init_irq_hw();
+	init_i8259a_irqs();
+#endif
+
+	for (qbbno = 0; qbbno < WILDFIRE_MAX_QBB; qbbno++) {
+	  if (WILDFIRE_QBB_EXISTS(qbbno)) {
+	    for (pcano = 0; pcano < WILDFIRE_PCA_PER_QBB; pcano++) {
+	      if (WILDFIRE_PCA_EXISTS(qbbno, pcano)) {
+		wildfire_init_irq_per_pca(qbbno, pcano);
+	      }
+	    }
+	  }
+	}
+}
+
+static void 
+wildfire_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	irq = (vector - 0x800) >> 4;
+
+	/*
+	 * bits 10-8:	source QBB ID
+	 * bits 7-6:	PCA
+	 * bits 5-0:	irq in PCA
+	 */
+
+	handle_irq(irq);
+	return;
+}
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary per PCA (2 PCI or HIPPI buses):
+ *
+ * Bit      Meaning
+ * 0-15     ISA
+ *
+ *32        ISA summary
+ *33        SMI
+ *34        NMI
+ *36        builtin QLogic SCSI (or slot 0 if no IO module)
+ *40        Interrupt Line A from slot 2 PCI0
+ *41        Interrupt Line B from slot 2 PCI0
+ *42        Interrupt Line C from slot 2 PCI0
+ *43        Interrupt Line D from slot 2 PCI0
+ *44        Interrupt Line A from slot 3 PCI0
+ *45        Interrupt Line B from slot 3 PCI0
+ *46        Interrupt Line C from slot 3 PCI0
+ *47        Interrupt Line D from slot 3 PCI0
+ *
+ *48        Interrupt Line A from slot 4 PCI1
+ *49        Interrupt Line B from slot 4 PCI1
+ *50        Interrupt Line C from slot 4 PCI1
+ *51        Interrupt Line D from slot 4 PCI1
+ *52        Interrupt Line A from slot 5 PCI1
+ *53        Interrupt Line B from slot 5 PCI1
+ *54        Interrupt Line C from slot 5 PCI1
+ *55        Interrupt Line D from slot 5 PCI1
+ *56        Interrupt Line A from slot 6 PCI1
+ *57        Interrupt Line B from slot 6 PCI1
+ *58        Interrupt Line C from slot 6 PCI1
+ *50        Interrupt Line D from slot 6 PCI1
+ *60        Interrupt Line A from slot 7 PCI1
+ *61        Interrupt Line B from slot 7 PCI1
+ *62        Interrupt Line C from slot 7 PCI1
+ *63        Interrupt Line D from slot 7 PCI1
+ * 
+ *
+ * IdSel	
+ *   0	 Cypress Bridge I/O (ISA summary interrupt)
+ *   1	 64 bit PCI 0 option slot 1 (SCSI QLogic builtin)
+ *   2	 64 bit PCI 0 option slot 2
+ *   3	 64 bit PCI 0 option slot 3
+ *   4	 64 bit PCI 1 option slot 4
+ *   5	 64 bit PCI 1 option slot 5
+ *   6	 64 bit PCI 1 option slot 6
+ *   7	 64 bit PCI 1 option slot 7
+ */
+
+static int
+wildfire_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[8][5] = {
+		/*INT    INTA   INTB   INTC   INTD */
+		{ -1,    -1,    -1,    -1,    -1}, /* IdSel 0 ISA Bridge */
+		{ 36,    36,    36+1, 36+2, 36+3}, /* IdSel 1 SCSI builtin */
+		{ 40,    40,    40+1, 40+2, 40+3}, /* IdSel 2 PCI 0 slot 2 */
+		{ 44,    44,    44+1, 44+2, 44+3}, /* IdSel 3 PCI 0 slot 3 */
+		{ 48,    48,    48+1, 48+2, 48+3}, /* IdSel 4 PCI 1 slot 4 */
+		{ 52,    52,    52+1, 52+2, 52+3}, /* IdSel 5 PCI 1 slot 5 */
+		{ 56,    56,    56+1, 56+2, 56+3}, /* IdSel 6 PCI 1 slot 6 */
+		{ 60,    60,    60+1, 60+2, 60+3}, /* IdSel 7 PCI 1 slot 7 */
+	};
+	long min_idsel = 0, max_idsel = 7, irqs_per_slot = 5;
+
+	struct pci_controller *hose = dev->sysdata;
+	int irq = COMMON_TABLE_LOOKUP;
+
+	if (irq > 0) {
+		int qbbno = hose->index >> 3;
+		int pcano = (hose->index >> 1) & 3;
+		irq += (qbbno << 8) + (pcano << 6);
+	}
+	return irq;
+}
+
+
+/*
+ * The System Vectors
+ */
+
+struct alpha_machine_vector wildfire_mv __initmv = {
+	.vector_name		= "WILDFIRE",
+	DO_EV6_MMU,
+	DO_DEFAULT_RTC,
+	DO_WILDFIRE_IO,
+	.machine_check		= wildfire_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= DEFAULT_MEM_BASE,
+
+	.nr_irqs		= WILDFIRE_NR_IRQS,
+	.device_interrupt	= wildfire_device_interrupt,
+
+	.init_arch		= wildfire_init_arch,
+	.init_irq		= wildfire_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= common_init_pci,
+	.kill_arch		= wildfire_kill_arch,
+	.pci_map_irq		= wildfire_map_irq,
+	.pci_swizzle		= common_swizzle,
+};
+ALIAS_MV(wildfire)
diff --git a/arch/alpha/kernel/syscalls/Makefile b/arch/alpha/kernel/syscalls/Makefile
new file mode 100644
index 0000000000..b265e4bc16
--- /dev/null
+++ b/arch/alpha/kernel/syscalls/Makefile
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+kapi := arch/$(SRCARCH)/include/generated/asm
+uapi := arch/$(SRCARCH)/include/generated/uapi/asm
+
+$(shell mkdir -p $(uapi) $(kapi))
+
+syscall := $(src)/syscall.tbl
+syshdr := $(srctree)/scripts/syscallhdr.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
+
+quiet_cmd_syshdr = SYSHDR  $@
+      cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr $< $@
+
+quiet_cmd_systbl = SYSTBL  $@
+      cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
+
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
+	$(call if_changed,syshdr)
+
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
+	$(call if_changed,systbl)
+
+uapisyshdr-y		+= unistd_32.h
+kapisyshdr-y		+= syscall_table.h
+
+uapisyshdr-y	:= $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y	:= $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets		+= $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
+
+PHONY += all
+all: $(uapisyshdr-y) $(kapisyshdr-y)
+	@:
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
new file mode 100644
index 0000000000..ad37569d05
--- /dev/null
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -0,0 +1,494 @@
+# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+#
+# system call numbers and entry vectors for alpha
+#
+# The format is:
+# <number> <abi> <name> <entry point>
+#
+# The <abi> is always "common" for this file
+#
+0	common	osf_syscall			alpha_syscall_zero
+1	common	exit				sys_exit
+2	common	fork				alpha_fork
+3	common	read				sys_read
+4	common	write				sys_write
+5	common	osf_old_open			sys_ni_syscall
+6	common	close				sys_close
+7	common	osf_wait4			sys_osf_wait4
+8	common	osf_old_creat			sys_ni_syscall
+9	common	link				sys_link
+10	common	unlink				sys_unlink
+11	common	osf_execve			sys_ni_syscall
+12	common	chdir				sys_chdir
+13	common	fchdir				sys_fchdir
+14	common	mknod				sys_mknod
+15	common	chmod				sys_chmod
+16	common	chown				sys_chown
+17	common	brk				sys_osf_brk
+18	common	osf_getfsstat			sys_ni_syscall
+19	common	lseek				sys_lseek
+20	common	getxpid				sys_getxpid
+21	common	osf_mount			sys_osf_mount
+22	common	umount2				sys_umount
+23	common	setuid				sys_setuid
+24	common	getxuid				sys_getxuid
+25	common	exec_with_loader		sys_ni_syscall
+26	common	ptrace				sys_ptrace
+27	common	osf_nrecvmsg			sys_ni_syscall
+28	common	osf_nsendmsg			sys_ni_syscall
+29	common	osf_nrecvfrom			sys_ni_syscall
+30	common	osf_naccept			sys_ni_syscall
+31	common	osf_ngetpeername		sys_ni_syscall
+32	common	osf_ngetsockname		sys_ni_syscall
+33	common	access				sys_access
+34	common	osf_chflags			sys_ni_syscall
+35	common	osf_fchflags			sys_ni_syscall
+36	common	sync				sys_sync
+37	common	kill				sys_kill
+38	common	osf_old_stat			sys_ni_syscall
+39	common	setpgid				sys_setpgid
+40	common	osf_old_lstat			sys_ni_syscall
+41	common	dup				sys_dup
+42	common	pipe				sys_alpha_pipe
+43	common	osf_set_program_attributes	sys_osf_set_program_attributes
+44	common	osf_profil			sys_ni_syscall
+45	common	open				sys_open
+46	common	osf_old_sigaction		sys_ni_syscall
+47	common	getxgid				sys_getxgid
+48	common	osf_sigprocmask			sys_osf_sigprocmask
+49	common	osf_getlogin			sys_ni_syscall
+50	common	osf_setlogin			sys_ni_syscall
+51	common	acct				sys_acct
+52	common	sigpending			sys_sigpending
+54	common	ioctl				sys_ioctl
+55	common	osf_reboot			sys_ni_syscall
+56	common	osf_revoke			sys_ni_syscall
+57	common	symlink				sys_symlink
+58	common	readlink			sys_readlink
+59	common	execve				sys_execve
+60	common	umask				sys_umask
+61	common	chroot				sys_chroot
+62	common	osf_old_fstat			sys_ni_syscall
+63	common	getpgrp				sys_getpgrp
+64	common	getpagesize			sys_getpagesize
+65	common	osf_mremap			sys_ni_syscall
+66	common	vfork				alpha_vfork
+67	common	stat				sys_newstat
+68	common	lstat				sys_newlstat
+69	common	osf_sbrk			sys_ni_syscall
+70	common	osf_sstk			sys_ni_syscall
+71	common	mmap				sys_osf_mmap
+72	common	osf_old_vadvise			sys_ni_syscall
+73	common	munmap				sys_munmap
+74	common	mprotect			sys_mprotect
+75	common	madvise				sys_madvise
+76	common	vhangup				sys_vhangup
+77	common	osf_kmodcall			sys_ni_syscall
+78	common	osf_mincore			sys_ni_syscall
+79	common	getgroups			sys_getgroups
+80	common	setgroups			sys_setgroups
+81	common	osf_old_getpgrp			sys_ni_syscall
+82	common	setpgrp				sys_setpgid
+83	common	osf_setitimer			compat_sys_setitimer
+84	common	osf_old_wait			sys_ni_syscall
+85	common	osf_table			sys_ni_syscall
+86	common	osf_getitimer			compat_sys_getitimer
+87	common	gethostname			sys_gethostname
+88	common	sethostname			sys_sethostname
+89	common	getdtablesize			sys_getdtablesize
+90	common	dup2				sys_dup2
+91	common	fstat				sys_newfstat
+92	common	fcntl				sys_fcntl
+93	common	osf_select			sys_osf_select
+94	common	poll				sys_poll
+95	common	fsync				sys_fsync
+96	common	setpriority			sys_setpriority
+97	common	socket				sys_socket
+98	common	connect				sys_connect
+99	common	accept				sys_accept
+100	common	getpriority			sys_osf_getpriority
+101	common	send				sys_send
+102	common	recv				sys_recv
+103	common	sigreturn			sys_sigreturn
+104	common	bind				sys_bind
+105	common	setsockopt			sys_setsockopt
+106	common	listen				sys_listen
+107	common	osf_plock			sys_ni_syscall
+108	common	osf_old_sigvec			sys_ni_syscall
+109	common	osf_old_sigblock		sys_ni_syscall
+110	common	osf_old_sigsetmask		sys_ni_syscall
+111	common	sigsuspend			sys_sigsuspend
+112	common	osf_sigstack			sys_osf_sigstack
+113	common	recvmsg				sys_recvmsg
+114	common	sendmsg				sys_sendmsg
+115	common	osf_old_vtrace			sys_ni_syscall
+116	common	osf_gettimeofday		sys_osf_gettimeofday
+117	common	osf_getrusage			sys_osf_getrusage
+118	common	getsockopt			sys_getsockopt
+120	common	readv				sys_readv
+121	common	writev				sys_writev
+122	common	osf_settimeofday		sys_osf_settimeofday
+123	common	fchown				sys_fchown
+124	common	fchmod				sys_fchmod
+125	common	recvfrom			sys_recvfrom
+126	common	setreuid			sys_setreuid
+127	common	setregid			sys_setregid
+128	common	rename				sys_rename
+129	common	truncate			sys_truncate
+130	common	ftruncate			sys_ftruncate
+131	common	flock				sys_flock
+132	common	setgid				sys_setgid
+133	common	sendto				sys_sendto
+134	common	shutdown			sys_shutdown
+135	common	socketpair			sys_socketpair
+136	common	mkdir				sys_mkdir
+137	common	rmdir				sys_rmdir
+138	common	osf_utimes			sys_osf_utimes
+139	common	osf_old_sigreturn		sys_ni_syscall
+140	common	osf_adjtime			sys_ni_syscall
+141	common	getpeername			sys_getpeername
+142	common	osf_gethostid			sys_ni_syscall
+143	common	osf_sethostid			sys_ni_syscall
+144	common	getrlimit			sys_getrlimit
+145	common	setrlimit			sys_setrlimit
+146	common	osf_old_killpg			sys_ni_syscall
+147	common	setsid				sys_setsid
+148	common	quotactl			sys_quotactl
+149	common	osf_oldquota			sys_ni_syscall
+150	common	getsockname			sys_getsockname
+153	common	osf_pid_block			sys_ni_syscall
+154	common	osf_pid_unblock			sys_ni_syscall
+156	common	sigaction			sys_osf_sigaction
+157	common	osf_sigwaitprim			sys_ni_syscall
+158	common	osf_nfssvc			sys_ni_syscall
+159	common	osf_getdirentries		sys_osf_getdirentries
+160	common	osf_statfs			sys_osf_statfs
+161	common	osf_fstatfs			sys_osf_fstatfs
+163	common	osf_asynch_daemon		sys_ni_syscall
+164	common	osf_getfh			sys_ni_syscall
+165	common	osf_getdomainname		sys_osf_getdomainname
+166	common	setdomainname			sys_setdomainname
+169	common	osf_exportfs			sys_ni_syscall
+181	common	osf_alt_plock			sys_ni_syscall
+184	common	osf_getmnt			sys_ni_syscall
+187	common	osf_alt_sigpending		sys_ni_syscall
+188	common	osf_alt_setsid			sys_ni_syscall
+199	common	osf_swapon			sys_swapon
+200	common	msgctl				sys_old_msgctl
+201	common	msgget				sys_msgget
+202	common	msgrcv				sys_msgrcv
+203	common	msgsnd				sys_msgsnd
+204	common	semctl				sys_old_semctl
+205	common	semget				sys_semget
+206	common	semop				sys_semop
+207	common	osf_utsname			sys_osf_utsname
+208	common	lchown				sys_lchown
+209	common	shmat				sys_shmat
+210	common	shmctl				sys_old_shmctl
+211	common	shmdt				sys_shmdt
+212	common	shmget				sys_shmget
+213	common	osf_mvalid			sys_ni_syscall
+214	common	osf_getaddressconf		sys_ni_syscall
+215	common	osf_msleep			sys_ni_syscall
+216	common	osf_mwakeup			sys_ni_syscall
+217	common	msync				sys_msync
+218	common	osf_signal			sys_ni_syscall
+219	common	osf_utc_gettime			sys_ni_syscall
+220	common	osf_utc_adjtime			sys_ni_syscall
+222	common	osf_security			sys_ni_syscall
+223	common	osf_kloadcall			sys_ni_syscall
+224	common	osf_stat			sys_osf_stat
+225	common	osf_lstat			sys_osf_lstat
+226	common	osf_fstat			sys_osf_fstat
+227	common	osf_statfs64			sys_osf_statfs64
+228	common	osf_fstatfs64			sys_osf_fstatfs64
+233	common	getpgid				sys_getpgid
+234	common	getsid				sys_getsid
+235	common	sigaltstack			sys_sigaltstack
+236	common	osf_waitid			sys_ni_syscall
+237	common	osf_priocntlset			sys_ni_syscall
+238	common	osf_sigsendset			sys_ni_syscall
+239	common	osf_set_speculative		sys_ni_syscall
+240	common	osf_msfs_syscall		sys_ni_syscall
+241	common	osf_sysinfo			sys_osf_sysinfo
+242	common	osf_uadmin			sys_ni_syscall
+243	common	osf_fuser			sys_ni_syscall
+244	common	osf_proplist_syscall		sys_osf_proplist_syscall
+245	common	osf_ntp_adjtime			sys_ni_syscall
+246	common	osf_ntp_gettime			sys_ni_syscall
+247	common	osf_pathconf			sys_ni_syscall
+248	common	osf_fpathconf			sys_ni_syscall
+250	common	osf_uswitch			sys_ni_syscall
+251	common	osf_usleep_thread		sys_osf_usleep_thread
+252	common	osf_audcntl			sys_ni_syscall
+253	common	osf_audgen			sys_ni_syscall
+254	common	sysfs				sys_sysfs
+255	common	osf_subsys_info			sys_ni_syscall
+256	common	osf_getsysinfo			sys_osf_getsysinfo
+257	common	osf_setsysinfo			sys_osf_setsysinfo
+258	common	osf_afs_syscall			sys_ni_syscall
+259	common	osf_swapctl			sys_ni_syscall
+260	common	osf_memcntl			sys_ni_syscall
+261	common	osf_fdatasync			sys_ni_syscall
+300	common	bdflush				sys_ni_syscall
+301	common	sethae				sys_sethae
+302	common	mount				sys_mount
+303	common	old_adjtimex			sys_old_adjtimex
+304	common	swapoff				sys_swapoff
+305	common	getdents			sys_getdents
+306	common	create_module			sys_ni_syscall
+307	common	init_module			sys_init_module
+308	common	delete_module			sys_delete_module
+309	common	get_kernel_syms			sys_ni_syscall
+310	common	syslog				sys_syslog
+311	common	reboot				sys_reboot
+312	common	clone				alpha_clone
+313	common	uselib				sys_uselib
+314	common	mlock				sys_mlock
+315	common	munlock				sys_munlock
+316	common	mlockall			sys_mlockall
+317	common	munlockall			sys_munlockall
+318	common	sysinfo				sys_sysinfo
+319	common	_sysctl				sys_ni_syscall
+# 320 was sys_idle
+321	common	oldumount			sys_oldumount
+322	common	swapon				sys_swapon
+323	common	times				sys_times
+324	common	personality			sys_personality
+325	common	setfsuid			sys_setfsuid
+326	common	setfsgid			sys_setfsgid
+327	common	ustat				sys_ustat
+328	common	statfs				sys_statfs
+329	common	fstatfs				sys_fstatfs
+330	common	sched_setparam			sys_sched_setparam
+331	common	sched_getparam			sys_sched_getparam
+332	common	sched_setscheduler		sys_sched_setscheduler
+333	common	sched_getscheduler		sys_sched_getscheduler
+334	common	sched_yield			sys_sched_yield
+335	common	sched_get_priority_max		sys_sched_get_priority_max
+336	common	sched_get_priority_min		sys_sched_get_priority_min
+337	common	sched_rr_get_interval		sys_sched_rr_get_interval
+338	common	afs_syscall			sys_ni_syscall
+339	common	uname				sys_newuname
+340	common	nanosleep			sys_nanosleep
+341	common	mremap				sys_mremap
+342	common	nfsservctl			sys_ni_syscall
+343	common	setresuid			sys_setresuid
+344	common	getresuid			sys_getresuid
+345	common	pciconfig_read			sys_pciconfig_read
+346	common	pciconfig_write			sys_pciconfig_write
+347	common	query_module			sys_ni_syscall
+348	common	prctl				sys_prctl
+349	common	pread64				sys_pread64
+350	common	pwrite64			sys_pwrite64
+351	common	rt_sigreturn			sys_rt_sigreturn
+352	common	rt_sigaction			sys_rt_sigaction
+353	common	rt_sigprocmask			sys_rt_sigprocmask
+354	common	rt_sigpending			sys_rt_sigpending
+355	common	rt_sigtimedwait			sys_rt_sigtimedwait
+356	common	rt_sigqueueinfo			sys_rt_sigqueueinfo
+357	common	rt_sigsuspend			sys_rt_sigsuspend
+358	common	select				sys_select
+359	common	gettimeofday			sys_gettimeofday
+360	common	settimeofday			sys_settimeofday
+361	common	getitimer			sys_getitimer
+362	common	setitimer			sys_setitimer
+363	common	utimes				sys_utimes
+364	common	getrusage			sys_getrusage
+365	common	wait4				sys_wait4
+366	common	adjtimex			sys_adjtimex
+367	common	getcwd				sys_getcwd
+368	common	capget				sys_capget
+369	common	capset				sys_capset
+370	common	sendfile			sys_sendfile64
+371	common	setresgid			sys_setresgid
+372	common	getresgid			sys_getresgid
+373	common	dipc				sys_ni_syscall
+374	common	pivot_root			sys_pivot_root
+375	common	mincore				sys_mincore
+376	common	pciconfig_iobase		sys_pciconfig_iobase
+377	common	getdents64			sys_getdents64
+378	common	gettid				sys_gettid
+379	common	readahead			sys_readahead
+# 380 is unused
+381	common	tkill				sys_tkill
+382	common	setxattr			sys_setxattr
+383	common	lsetxattr			sys_lsetxattr
+384	common	fsetxattr			sys_fsetxattr
+385	common	getxattr			sys_getxattr
+386	common	lgetxattr			sys_lgetxattr
+387	common	fgetxattr			sys_fgetxattr
+388	common	listxattr			sys_listxattr
+389	common	llistxattr			sys_llistxattr
+390	common	flistxattr			sys_flistxattr
+391	common	removexattr			sys_removexattr
+392	common	lremovexattr			sys_lremovexattr
+393	common	fremovexattr			sys_fremovexattr
+394	common	futex				sys_futex
+395	common	sched_setaffinity		sys_sched_setaffinity
+396	common	sched_getaffinity		sys_sched_getaffinity
+397	common	tuxcall				sys_ni_syscall
+398	common	io_setup			sys_io_setup
+399	common	io_destroy			sys_io_destroy
+400	common	io_getevents			sys_io_getevents
+401	common	io_submit			sys_io_submit
+402	common	io_cancel			sys_io_cancel
+405	common	exit_group			sys_exit_group
+406	common	lookup_dcookie			sys_lookup_dcookie
+407	common	epoll_create			sys_epoll_create
+408	common	epoll_ctl			sys_epoll_ctl
+409	common	epoll_wait			sys_epoll_wait
+410	common	remap_file_pages		sys_remap_file_pages
+411	common	set_tid_address			sys_set_tid_address
+412	common	restart_syscall			sys_restart_syscall
+413	common	fadvise64			sys_fadvise64
+414	common	timer_create			sys_timer_create
+415	common	timer_settime			sys_timer_settime
+416	common	timer_gettime			sys_timer_gettime
+417	common	timer_getoverrun		sys_timer_getoverrun
+418	common	timer_delete			sys_timer_delete
+419	common	clock_settime			sys_clock_settime
+420	common	clock_gettime			sys_clock_gettime
+421	common	clock_getres			sys_clock_getres
+422	common	clock_nanosleep			sys_clock_nanosleep
+423	common	semtimedop			sys_semtimedop
+424	common	tgkill				sys_tgkill
+425	common	stat64				sys_stat64
+426	common	lstat64				sys_lstat64
+427	common	fstat64				sys_fstat64
+428	common	vserver				sys_ni_syscall
+429	common	mbind				sys_ni_syscall
+430	common	get_mempolicy			sys_ni_syscall
+431	common	set_mempolicy			sys_ni_syscall
+432	common	mq_open				sys_mq_open
+433	common	mq_unlink			sys_mq_unlink
+434	common	mq_timedsend			sys_mq_timedsend
+435	common	mq_timedreceive			sys_mq_timedreceive
+436	common	mq_notify			sys_mq_notify
+437	common	mq_getsetattr			sys_mq_getsetattr
+438	common	waitid				sys_waitid
+439	common	add_key				sys_add_key
+440	common	request_key			sys_request_key
+441	common	keyctl				sys_keyctl
+442	common	ioprio_set			sys_ioprio_set
+443	common	ioprio_get			sys_ioprio_get
+444	common	inotify_init			sys_inotify_init
+445	common	inotify_add_watch		sys_inotify_add_watch
+446	common	inotify_rm_watch		sys_inotify_rm_watch
+447	common	fdatasync			sys_fdatasync
+448	common	kexec_load			sys_kexec_load
+449	common	migrate_pages			sys_migrate_pages
+450	common	openat				sys_openat
+451	common	mkdirat				sys_mkdirat
+452	common	mknodat				sys_mknodat
+453	common	fchownat			sys_fchownat
+454	common	futimesat			sys_futimesat
+455	common	fstatat64			sys_fstatat64
+456	common	unlinkat			sys_unlinkat
+457	common	renameat			sys_renameat
+458	common	linkat				sys_linkat
+459	common	symlinkat			sys_symlinkat
+460	common	readlinkat			sys_readlinkat
+461	common	fchmodat			sys_fchmodat
+462	common	faccessat			sys_faccessat
+463	common	pselect6			sys_pselect6
+464	common	ppoll				sys_ppoll
+465	common	unshare				sys_unshare
+466	common	set_robust_list			sys_set_robust_list
+467	common	get_robust_list			sys_get_robust_list
+468	common	splice				sys_splice
+469	common	sync_file_range			sys_sync_file_range
+470	common	tee				sys_tee
+471	common	vmsplice			sys_vmsplice
+472	common	move_pages			sys_move_pages
+473	common	getcpu				sys_getcpu
+474	common	epoll_pwait			sys_epoll_pwait
+475	common	utimensat			sys_utimensat
+476	common	signalfd			sys_signalfd
+477	common	timerfd				sys_ni_syscall
+478	common	eventfd				sys_eventfd
+479	common	recvmmsg			sys_recvmmsg
+480	common	fallocate			sys_fallocate
+481	common	timerfd_create			sys_timerfd_create
+482	common	timerfd_settime			sys_timerfd_settime
+483	common	timerfd_gettime			sys_timerfd_gettime
+484	common	signalfd4			sys_signalfd4
+485	common	eventfd2			sys_eventfd2
+486	common	epoll_create1			sys_epoll_create1
+487	common	dup3				sys_dup3
+488	common	pipe2				sys_pipe2
+489	common	inotify_init1			sys_inotify_init1
+490	common	preadv				sys_preadv
+491	common	pwritev				sys_pwritev
+492	common	rt_tgsigqueueinfo		sys_rt_tgsigqueueinfo
+493	common	perf_event_open			sys_perf_event_open
+494	common	fanotify_init			sys_fanotify_init
+495	common	fanotify_mark			sys_fanotify_mark
+496	common	prlimit64			sys_prlimit64
+497	common	name_to_handle_at		sys_name_to_handle_at
+498	common	open_by_handle_at		sys_open_by_handle_at
+499	common	clock_adjtime			sys_clock_adjtime
+500	common	syncfs				sys_syncfs
+501	common	setns				sys_setns
+502	common	accept4				sys_accept4
+503	common	sendmmsg			sys_sendmmsg
+504	common	process_vm_readv		sys_process_vm_readv
+505	common	process_vm_writev		sys_process_vm_writev
+506	common	kcmp				sys_kcmp
+507	common	finit_module			sys_finit_module
+508	common	sched_setattr			sys_sched_setattr
+509	common	sched_getattr			sys_sched_getattr
+510	common	renameat2			sys_renameat2
+511	common	getrandom			sys_getrandom
+512	common	memfd_create			sys_memfd_create
+513	common	execveat			sys_execveat
+514	common	seccomp				sys_seccomp
+515	common	bpf				sys_bpf
+516	common	userfaultfd			sys_userfaultfd
+517	common	membarrier			sys_membarrier
+518	common	mlock2				sys_mlock2
+519	common	copy_file_range			sys_copy_file_range
+520	common	preadv2				sys_preadv2
+521	common	pwritev2			sys_pwritev2
+522	common	statx				sys_statx
+523	common	io_pgetevents			sys_io_pgetevents
+524	common	pkey_mprotect			sys_pkey_mprotect
+525	common	pkey_alloc			sys_pkey_alloc
+526	common	pkey_free			sys_pkey_free
+527	common	rseq				sys_rseq
+528	common	statfs64			sys_statfs64
+529	common	fstatfs64			sys_fstatfs64
+530	common	getegid				sys_getegid
+531	common	geteuid				sys_geteuid
+532	common	getppid				sys_getppid
+# all other architectures have common numbers for new syscall, alpha
+# is the exception.
+534	common	pidfd_send_signal		sys_pidfd_send_signal
+535	common	io_uring_setup			sys_io_uring_setup
+536	common	io_uring_enter			sys_io_uring_enter
+537	common	io_uring_register		sys_io_uring_register
+538	common	open_tree			sys_open_tree
+539	common	move_mount			sys_move_mount
+540	common	fsopen				sys_fsopen
+541	common	fsconfig			sys_fsconfig
+542	common	fsmount				sys_fsmount
+543	common	fspick				sys_fspick
+544	common	pidfd_open			sys_pidfd_open
+# 545 reserved for clone3
+546	common	close_range			sys_close_range
+547	common	openat2				sys_openat2
+548	common	pidfd_getfd			sys_pidfd_getfd
+549	common	faccessat2			sys_faccessat2
+550	common	process_madvise			sys_process_madvise
+551	common	epoll_pwait2			sys_epoll_pwait2
+552	common	mount_setattr			sys_mount_setattr
+553	common	quotactl_fd			sys_quotactl_fd
+554	common	landlock_create_ruleset		sys_landlock_create_ruleset
+555	common	landlock_add_rule		sys_landlock_add_rule
+556	common	landlock_restrict_self		sys_landlock_restrict_self
+# 557 reserved for memfd_secret
+558	common	process_mrelease		sys_process_mrelease
+559	common  futex_waitv                     sys_futex_waitv
+560	common	set_mempolicy_home_node		sys_ni_syscall
+561	common	cachestat			sys_cachestat
+562	common	fchmodat2			sys_fchmodat2
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
new file mode 100644
index 0000000000..68f3e4f329
--- /dev/null
+++ b/arch/alpha/kernel/systbls.S
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/alpha/kernel/systbls.S
+ *
+ * The system call table. 
+ */
+
+#include <asm/unistd.h>
+
+#define __SYSCALL(nr, entry) .quad entry
+	.data
+	.align 3
+	.globl sys_call_table
+sys_call_table:
+#include <asm/syscall_table.h>
diff --git a/arch/alpha/kernel/termios.c b/arch/alpha/kernel/termios.c
new file mode 100644
index 0000000000..a4c29a22ed
--- /dev/null
+++ b/arch/alpha/kernel/termios.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/termios_internal.h>
+
+int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	struct termio v;
+	bool canon;
+
+	if (copy_from_user(&v, termio, sizeof(struct termio)))
+		return -EFAULT;
+
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | v.c_iflag;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | v.c_oflag;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | v.c_cflag;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | v.c_lflag;
+	termios->c_line = (0xffff0000 & termios->c_lflag) | v.c_line;
+
+	canon = v.c_lflag & ICANON;
+	termios->c_cc[VINTR]  = v.c_cc[_VINTR];
+	termios->c_cc[VQUIT]  = v.c_cc[_VQUIT];
+	termios->c_cc[VERASE] = v.c_cc[_VERASE];
+	termios->c_cc[VKILL]  = v.c_cc[_VKILL];
+	termios->c_cc[VEOL2]  = v.c_cc[_VEOL2];
+	termios->c_cc[VSWTC]  = v.c_cc[_VSWTC];
+	termios->c_cc[canon ? VEOF : VMIN]  = v.c_cc[_VEOF];
+	termios->c_cc[canon ? VEOL : VTIME] = v.c_cc[_VEOL];
+
+	return 0;
+}
+
+int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	struct termio v;
+	bool canon;
+
+	memset(&v, 0, sizeof(struct termio));
+	v.c_iflag = termios->c_iflag;
+	v.c_oflag = termios->c_oflag;
+	v.c_cflag = termios->c_cflag;
+	v.c_lflag = termios->c_lflag;
+	v.c_line = termios->c_line;
+
+	canon = v.c_lflag & ICANON;
+	v.c_cc[_VINTR]  = termios->c_cc[VINTR];
+	v.c_cc[_VQUIT]  = termios->c_cc[VQUIT];
+	v.c_cc[_VERASE] = termios->c_cc[VERASE];
+	v.c_cc[_VKILL]  = termios->c_cc[VKILL];
+	v.c_cc[_VEOF]   = termios->c_cc[canon ? VEOF : VMIN];
+	v.c_cc[_VEOL]   = termios->c_cc[canon ? VEOL : VTIME];
+	v.c_cc[_VEOL2]  = termios->c_cc[VEOL2];
+	v.c_cc[_VSWTC]  = termios->c_cc[VSWTC];
+
+	return copy_to_user(termio, &v, sizeof(struct termio));
+}
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
new file mode 100644
index 0000000000..4d01c392ab
--- /dev/null
+++ b/arch/alpha/kernel/time.c
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995, 1999, 2000  Linus Torvalds
+ *
+ * This file contains the clocksource time handling.
+ * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
+ *		"A Kernel Model for Precision Timekeeping" by Dave Mills
+ * 1997-01-09    Adrian Sun
+ *      use interval timer if CONFIG_RTC=y
+ * 1997-10-29    John Bowman (bowman@math.ualberta.ca)
+ *      fixed tick loss calculation in timer_interrupt
+ *      (round system clock to nearest tick instead of truncating)
+ *      fixed algorithm in time_init for getting time from CMOS clock
+ * 1999-04-16	Thorsten Kranzkowski (dl8bcu@gmx.net)
+ *	fixed algorithm in do_gettimeofday() for calculating the precise time
+ *	from processor cycle counter (now taking lost_ticks into account)
+ * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
+ *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
+ */
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+#include <linux/profile.h>
+#include <linux/irq_work.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/hwrpb.h>
+
+#include <linux/mc146818rtc.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+unsigned long est_cycle_freq;
+
+#ifdef CONFIG_IRQ_WORK
+
+DEFINE_PER_CPU(u8, irq_work_pending);
+
+#define set_irq_work_pending_flag()  __this_cpu_write(irq_work_pending, 1)
+#define test_irq_work_pending()      __this_cpu_read(irq_work_pending)
+#define clear_irq_work_pending()     __this_cpu_write(irq_work_pending, 0)
+
+void arch_irq_work_raise(void)
+{
+	set_irq_work_pending_flag();
+}
+
+#else  /* CONFIG_IRQ_WORK */
+
+#define test_irq_work_pending()      0
+#define clear_irq_work_pending()
+
+#endif /* CONFIG_IRQ_WORK */
+
+
+static inline __u32 rpcc(void)
+{
+	return __builtin_alpha_rpcc();
+}
+
+
+
+/*
+ * The RTC as a clock_event_device primitive.
+ */
+
+static DEFINE_PER_CPU(struct clock_event_device, cpu_ce);
+
+irqreturn_t
+rtc_timer_interrupt(int irq, void *dev)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	/* Don't run the hook for UNUSED or SHUTDOWN.  */
+	if (likely(clockevent_state_periodic(ce)))
+		ce->event_handler(ce);
+
+	if (test_irq_work_pending()) {
+		clear_irq_work_pending();
+		irq_work_run();
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int
+rtc_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
+{
+	/* This hook is for oneshot mode, which we don't support.  */
+	return -EINVAL;
+}
+
+static void __init
+init_rtc_clockevent(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	*ce = (struct clock_event_device){
+		.name = "rtc",
+		.features = CLOCK_EVT_FEAT_PERIODIC,
+		.rating = 100,
+		.cpumask = cpumask_of(cpu),
+		.set_next_event = rtc_ce_set_next_event,
+	};
+
+	clockevents_config_and_register(ce, CONFIG_HZ, 0, 0);
+}
+
+
+/*
+ * The QEMU clock as a clocksource primitive.
+ */
+
+static u64
+qemu_cs_read(struct clocksource *cs)
+{
+	return qemu_get_vmtime();
+}
+
+static struct clocksource qemu_cs = {
+	.name                   = "qemu",
+	.rating                 = 400,
+	.read                   = qemu_cs_read,
+	.mask                   = CLOCKSOURCE_MASK(64),
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS,
+	.max_idle_ns		= LONG_MAX
+};
+
+
+/*
+ * The QEMU alarm as a clock_event_device primitive.
+ */
+
+static int qemu_ce_shutdown(struct clock_event_device *ce)
+{
+	/* The mode member of CE is updated for us in generic code.
+	   Just make sure that the event is disabled.  */
+	qemu_set_alarm_abs(0);
+	return 0;
+}
+
+static int
+qemu_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
+{
+	qemu_set_alarm_rel(evt);
+	return 0;
+}
+
+static irqreturn_t
+qemu_timer_interrupt(int irq, void *dev)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	ce->event_handler(ce);
+	return IRQ_HANDLED;
+}
+
+static void __init
+init_qemu_clockevent(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	*ce = (struct clock_event_device){
+		.name = "qemu",
+		.features = CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 400,
+		.cpumask = cpumask_of(cpu),
+		.set_state_shutdown = qemu_ce_shutdown,
+		.set_state_oneshot = qemu_ce_shutdown,
+		.tick_resume = qemu_ce_shutdown,
+		.set_next_event = qemu_ce_set_next_event,
+	};
+
+	clockevents_config_and_register(ce, NSEC_PER_SEC, 1000, LONG_MAX);
+}
+
+
+void __init
+common_init_rtc(void)
+{
+	unsigned char x, sel = 0;
+
+	/* Reset periodic interrupt frequency.  */
+#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
+ 	x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
+	/* Test includes known working values on various platforms
+	   where 0x26 is wrong; we refuse to change those. */
+ 	if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
+		sel = RTC_REF_CLCK_32KHZ + 6;
+	}
+#elif CONFIG_HZ == 256 || CONFIG_HZ == 128 || CONFIG_HZ == 64 || CONFIG_HZ == 32
+	sel = RTC_REF_CLCK_32KHZ + __builtin_ffs(32768 / CONFIG_HZ);
+#else
+# error "Unknown HZ from arch/alpha/Kconfig"
+#endif
+	if (sel) {
+		printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n",
+		       CONFIG_HZ, sel);
+		CMOS_WRITE(sel, RTC_FREQ_SELECT);
+ 	}
+
+	/* Turn on periodic interrupts.  */
+	x = CMOS_READ(RTC_CONTROL);
+	if (!(x & RTC_PIE)) {
+		printk("Turning on RTC interrupts.\n");
+		x |= RTC_PIE;
+		x &= ~(RTC_AIE | RTC_UIE);
+		CMOS_WRITE(x, RTC_CONTROL);
+	}
+	(void) CMOS_READ(RTC_INTR_FLAGS);
+
+	outb(0x36, 0x43);	/* pit counter 0: system timer */
+	outb(0x00, 0x40);
+	outb(0x00, 0x40);
+
+	outb(0xb6, 0x43);	/* pit counter 2: speaker */
+	outb(0x31, 0x42);
+	outb(0x13, 0x42);
+
+	init_rtc_irq(NULL);
+}
+
+
+#ifndef CONFIG_ALPHA_WTINT
+/*
+ * The RPCC as a clocksource primitive.
+ *
+ * While we have free-running timecounters running on all CPUs, and we make
+ * a half-hearted attempt in init_rtc_rpcc_info to sync the timecounter
+ * with the wall clock, that initialization isn't kept up-to-date across
+ * different time counters in SMP mode.  Therefore we can only use this
+ * method when there's only one CPU enabled.
+ *
+ * When using the WTINT PALcall, the RPCC may shift to a lower frequency,
+ * or stop altogether, while waiting for the interrupt.  Therefore we cannot
+ * use this method when WTINT is in use.
+ */
+
+static u64 read_rpcc(struct clocksource *cs)
+{
+	return rpcc();
+}
+
+static struct clocksource clocksource_rpcc = {
+	.name                   = "rpcc",
+	.rating                 = 300,
+	.read                   = read_rpcc,
+	.mask                   = CLOCKSOURCE_MASK(32),
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS
+};
+#endif /* ALPHA_WTINT */
+
+
+/* Validate a computed cycle counter result against the known bounds for
+   the given processor core.  There's too much brokenness in the way of
+   timing hardware for any one method to work everywhere.  :-(
+
+   Return 0 if the result cannot be trusted, otherwise return the argument.  */
+
+static unsigned long __init
+validate_cc_value(unsigned long cc)
+{
+	static struct bounds {
+		unsigned int min, max;
+	} cpu_hz[] __initdata = {
+		[EV3_CPU]    = {   50000000,  200000000 },	/* guess */
+		[EV4_CPU]    = {  100000000,  300000000 },
+		[LCA4_CPU]   = {  100000000,  300000000 },	/* guess */
+		[EV45_CPU]   = {  200000000,  300000000 },
+		[EV5_CPU]    = {  250000000,  433000000 },
+		[EV56_CPU]   = {  333000000,  667000000 },
+		[PCA56_CPU]  = {  400000000,  600000000 },	/* guess */
+		[PCA57_CPU]  = {  500000000,  600000000 },	/* guess */
+		[EV6_CPU]    = {  466000000,  600000000 },
+		[EV67_CPU]   = {  600000000,  750000000 },
+		[EV68AL_CPU] = {  750000000,  940000000 },
+		[EV68CB_CPU] = { 1000000000, 1333333333 },
+		/* None of the following are shipping as of 2001-11-01.  */
+		[EV68CX_CPU] = { 1000000000, 1700000000 },	/* guess */
+		[EV69_CPU]   = { 1000000000, 1700000000 },	/* guess */
+		[EV7_CPU]    = {  800000000, 1400000000 },	/* guess */
+		[EV79_CPU]   = { 1000000000, 2000000000 },	/* guess */
+	};
+
+	/* Allow for some drift in the crystal.  10MHz is more than enough.  */
+	const unsigned int deviation = 10000000;
+
+	struct percpu_struct *cpu;
+	unsigned int index;
+
+	cpu = (struct percpu_struct *)((char*)hwrpb + hwrpb->processor_offset);
+	index = cpu->type & 0xffffffff;
+
+	/* If index out of bounds, no way to validate.  */
+	if (index >= ARRAY_SIZE(cpu_hz))
+		return cc;
+
+	/* If index contains no data, no way to validate.  */
+	if (cpu_hz[index].max == 0)
+		return cc;
+
+	if (cc < cpu_hz[index].min - deviation
+	    || cc > cpu_hz[index].max + deviation)
+		return 0;
+
+	return cc;
+}
+
+
+/*
+ * Calibrate CPU clock using legacy 8254 timer/counter. Stolen from
+ * arch/i386/time.c.
+ */
+
+#define CALIBRATE_LATCH	0xffff
+#define TIMEOUT_COUNT	0x100000
+
+static unsigned long __init
+calibrate_cc_with_pit(void)
+{
+	int cc, count = 0;
+
+	/* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Now let's take care of CTC channel 2
+	 *
+	 * Set the Gate high, program CTC channel 2 for mode 0,
+	 * (interrupt on terminal count mode), binary count,
+	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 */
+	outb(0xb0, 0x43);		/* binary, mode 0, LSB/MSB, Ch 2 */
+	outb(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb(CALIBRATE_LATCH >> 8, 0x42);	/* MSB of count */
+
+	cc = rpcc();
+	do {
+		count++;
+	} while ((inb(0x61) & 0x20) == 0 && count < TIMEOUT_COUNT);
+	cc = rpcc() - cc;
+
+	/* Error: ECTCNEVERSET or ECPUTOOFAST.  */
+	if (count <= 1 || count == TIMEOUT_COUNT)
+		return 0;
+
+	return ((long)cc * PIT_TICK_RATE) / (CALIBRATE_LATCH + 1);
+}
+
+/* The Linux interpretation of the CMOS clock register contents:
+   When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+   RTC registers show the second which has precisely just started.
+   Let's hope other operating systems interpret the RTC the same way.  */
+
+static unsigned long __init
+rpcc_after_update_in_progress(void)
+{
+	do { } while (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP));
+	do { } while (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+
+	return rpcc();
+}
+
+void __init
+time_init(void)
+{
+	unsigned int cc1, cc2;
+	unsigned long cycle_freq, tolerance;
+	long diff;
+
+	if (alpha_using_qemu) {
+		clocksource_register_hz(&qemu_cs, NSEC_PER_SEC);
+		init_qemu_clockevent();
+		init_rtc_irq(qemu_timer_interrupt);
+		return;
+	}
+
+	/* Calibrate CPU clock -- attempt #1.  */
+	if (!est_cycle_freq)
+		est_cycle_freq = validate_cc_value(calibrate_cc_with_pit());
+
+	cc1 = rpcc();
+
+	/* Calibrate CPU clock -- attempt #2.  */
+	if (!est_cycle_freq) {
+		cc1 = rpcc_after_update_in_progress();
+		cc2 = rpcc_after_update_in_progress();
+		est_cycle_freq = validate_cc_value(cc2 - cc1);
+		cc1 = cc2;
+	}
+
+	cycle_freq = hwrpb->cycle_freq;
+	if (est_cycle_freq) {
+		/* If the given value is within 250 PPM of what we calculated,
+		   accept it.  Otherwise, use what we found.  */
+		tolerance = cycle_freq / 4000;
+		diff = cycle_freq - est_cycle_freq;
+		if (diff < 0)
+			diff = -diff;
+		if ((unsigned long)diff > tolerance) {
+			cycle_freq = est_cycle_freq;
+			printk("HWRPB cycle frequency bogus.  "
+			       "Estimated %lu Hz\n", cycle_freq);
+		} else {
+			est_cycle_freq = 0;
+		}
+	} else if (! validate_cc_value (cycle_freq)) {
+		printk("HWRPB cycle frequency bogus, "
+		       "and unable to estimate a proper value!\n");
+	}
+
+	/* See above for restrictions on using clocksource_rpcc.  */
+#ifndef CONFIG_ALPHA_WTINT
+	if (hwrpb->nr_processors == 1)
+		clocksource_register_hz(&clocksource_rpcc, cycle_freq);
+#endif
+
+	/* Startup the timer source. */
+	alpha_mv.init_rtc();
+	init_rtc_clockevent();
+}
+
+/* Initialize the clock_event_device for secondary cpus.  */
+#ifdef CONFIG_SMP
+void __init
+init_clockevent(void)
+{
+	if (alpha_using_qemu)
+		init_qemu_clockevent();
+	else
+		init_rtc_clockevent();
+}
+#endif
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
new file mode 100644
index 0000000000..d9a67b370e
--- /dev/null
+++ b/arch/alpha/kernel/traps.c
@@ -0,0 +1,992 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/alpha/kernel/traps.c
+ *
+ * (C) Copyright 1994 Linus Torvalds
+ */
+
+/*
+ * This file initializes the trap entry points
+ */
+
+#include <linux/jiffies.h>
+#include <linux/mm.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/debug.h>
+#include <linux/tty.h>
+#include <linux/delay.h>
+#include <linux/extable.h>
+#include <linux/kallsyms.h>
+#include <linux/ratelimit.h>
+
+#include <asm/gentrap.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+#include <asm/sysinfo.h>
+#include <asm/hwrpb.h>
+#include <asm/mmu_context.h>
+#include <asm/special_insns.h>
+
+#include "proto.h"
+
+/* Work-around for some SRMs which mishandle opDEC faults.  */
+
+static int opDEC_fix;
+
+static void
+opDEC_check(void)
+{
+	__asm__ __volatile__ (
+	/* Load the address of... */
+	"	br	$16, 1f\n"
+	/* A stub instruction fault handler.  Just add 4 to the
+	   pc and continue.  */
+	"	ldq	$16, 8($sp)\n"
+	"	addq	$16, 4, $16\n"
+	"	stq	$16, 8($sp)\n"
+	"	call_pal %[rti]\n"
+	/* Install the instruction fault handler.  */
+	"1:	lda	$17, 3\n"
+	"	call_pal %[wrent]\n"
+	/* With that in place, the fault from the round-to-minf fp
+	   insn will arrive either at the "lda 4" insn (bad) or one
+	   past that (good).  This places the correct fixup in %0.  */
+	"	lda %[fix], 0\n"
+	"	cvttq/svm $f31,$f31\n"
+	"	lda %[fix], 4"
+	: [fix] "=r" (opDEC_fix)
+	: [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
+	: "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
+
+	if (opDEC_fix)
+		printk("opDEC fixup enabled.\n");
+}
+
+void
+dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
+{
+	printk("pc = [<%016lx>]  ra = [<%016lx>]  ps = %04lx    %s\n",
+	       regs->pc, regs->r26, regs->ps, print_tainted());
+	printk("pc is at %pSR\n", (void *)regs->pc);
+	printk("ra is at %pSR\n", (void *)regs->r26);
+	printk("v0 = %016lx  t0 = %016lx  t1 = %016lx\n",
+	       regs->r0, regs->r1, regs->r2);
+	printk("t2 = %016lx  t3 = %016lx  t4 = %016lx\n",
+ 	       regs->r3, regs->r4, regs->r5);
+	printk("t5 = %016lx  t6 = %016lx  t7 = %016lx\n",
+	       regs->r6, regs->r7, regs->r8);
+
+	if (r9_15) {
+		printk("s0 = %016lx  s1 = %016lx  s2 = %016lx\n",
+		       r9_15[9], r9_15[10], r9_15[11]);
+		printk("s3 = %016lx  s4 = %016lx  s5 = %016lx\n",
+		       r9_15[12], r9_15[13], r9_15[14]);
+		printk("s6 = %016lx\n", r9_15[15]);
+	}
+
+	printk("a0 = %016lx  a1 = %016lx  a2 = %016lx\n",
+	       regs->r16, regs->r17, regs->r18);
+	printk("a3 = %016lx  a4 = %016lx  a5 = %016lx\n",
+ 	       regs->r19, regs->r20, regs->r21);
+ 	printk("t8 = %016lx  t9 = %016lx  t10= %016lx\n",
+	       regs->r22, regs->r23, regs->r24);
+	printk("t11= %016lx  pv = %016lx  at = %016lx\n",
+	       regs->r25, regs->r27, regs->r28);
+	printk("gp = %016lx  sp = %p\n", regs->gp, regs+1);
+#if 0
+__halt();
+#endif
+}
+
+#if 0
+static char * ireg_name[] = {"v0", "t0", "t1", "t2", "t3", "t4", "t5", "t6",
+			   "t7", "s0", "s1", "s2", "s3", "s4", "s5", "s6",
+			   "a0", "a1", "a2", "a3", "a4", "a5", "t8", "t9",
+			   "t10", "t11", "ra", "pv", "at", "gp", "sp", "zero"};
+#endif
+
+static void
+dik_show_code(unsigned int *pc)
+{
+	long i;
+
+	printk("Code:");
+	for (i = -6; i < 2; i++) {
+		unsigned int insn;
+		if (__get_user(insn, (unsigned int __user *)pc + i))
+			break;
+		printk("%c%08x%c", i ? ' ' : '<', insn, i ? ' ' : '>');
+	}
+	printk("\n");
+}
+
+static void
+dik_show_trace(unsigned long *sp, const char *loglvl)
+{
+	long i = 0;
+	printk("%sTrace:\n", loglvl);
+	while (0x1ff8 & (unsigned long) sp) {
+		extern char _stext[], _etext[];
+		unsigned long tmp = *sp;
+		sp++;
+		if (!is_kernel_text(tmp))
+			continue;
+		printk("%s[<%lx>] %pSR\n", loglvl, tmp, (void *)tmp);
+		if (i > 40) {
+			printk("%s ...", loglvl);
+			break;
+		}
+	}
+	printk("%s\n", loglvl);
+}
+
+static int kstack_depth_to_print = 24;
+
+void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
+{
+	unsigned long *stack;
+	int i;
+
+	/*
+	 * debugging aid: "show_stack(NULL, NULL, KERN_EMERG);" prints the
+	 * back trace for this cpu.
+	 */
+	if(sp==NULL)
+		sp=(unsigned long*)&sp;
+
+	stack = sp;
+	for(i=0; i < kstack_depth_to_print; i++) {
+		if (((long) stack & (THREAD_SIZE-1)) == 0)
+			break;
+		if ((i % 4) == 0) {
+			if (i)
+				pr_cont("\n");
+			printk("%s       ", loglvl);
+		} else {
+			pr_cont(" ");
+		}
+		pr_cont("%016lx", *stack++);
+	}
+	pr_cont("\n");
+	dik_show_trace(sp, loglvl);
+}
+
+void
+die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
+{
+	if (regs->ps & 8)
+		return;
+#ifdef CONFIG_SMP
+	printk("CPU %d ", hard_smp_processor_id());
+#endif
+	printk("%s(%d): %s %ld\n", current->comm, task_pid_nr(current), str, err);
+	dik_show_regs(regs, r9_15);
+	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
+	dik_show_trace((unsigned long *)(regs+1), KERN_DEFAULT);
+	dik_show_code((unsigned int *)regs->pc);
+
+	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
+		printk("die_if_kernel recursion detected.\n");
+		local_irq_enable();
+		while (1);
+	}
+	make_task_dead(SIGSEGV);
+}
+
+#ifndef CONFIG_MATHEMU
+static long dummy_emul(void) { return 0; }
+long (*alpha_fp_emul_imprecise)(struct pt_regs *regs, unsigned long writemask)
+  = (void *)dummy_emul;
+EXPORT_SYMBOL_GPL(alpha_fp_emul_imprecise);
+long (*alpha_fp_emul) (unsigned long pc)
+  = (void *)dummy_emul;
+EXPORT_SYMBOL_GPL(alpha_fp_emul);
+#else
+long alpha_fp_emul_imprecise(struct pt_regs *regs, unsigned long writemask);
+long alpha_fp_emul (unsigned long pc);
+#endif
+
+asmlinkage void
+do_entArith(unsigned long summary, unsigned long write_mask,
+	    struct pt_regs *regs)
+{
+	long si_code = FPE_FLTINV;
+
+	if (summary & 1) {
+		/* Software-completion summary bit is set, so try to
+		   emulate the instruction.  If the processor supports
+		   precise exceptions, we don't have to search.  */
+		if (!amask(AMASK_PRECISE_TRAP))
+			si_code = alpha_fp_emul(regs->pc - 4);
+		else
+			si_code = alpha_fp_emul_imprecise(regs, write_mask);
+		if (si_code == 0)
+			return;
+	}
+	die_if_kernel("Arithmetic fault", regs, 0, NULL);
+
+	send_sig_fault_trapno(SIGFPE, si_code, (void __user *) regs->pc, 0, current);
+}
+
+asmlinkage void
+do_entIF(unsigned long type, struct pt_regs *regs)
+{
+	int signo, code;
+
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
+		if (type == 1) {
+			const unsigned int *data
+			  = (const unsigned int *) regs->pc;
+			printk("Kernel bug at %s:%d\n",
+			       (const char *)(data[1] | (long)data[2] << 32), 
+			       data[0]);
+		}
+#ifdef CONFIG_ALPHA_WTINT
+		if (type == 4) {
+			/* If CALL_PAL WTINT is totally unsupported by the
+			   PALcode, e.g. MILO, "emulate" it by overwriting
+			   the insn.  */
+			unsigned int *pinsn
+			  = (unsigned int *) regs->pc - 1;
+			if (*pinsn == PAL_wtint) {
+				*pinsn = 0x47e01400; /* mov 0,$0 */
+				imb();
+				regs->r0 = 0;
+				return;
+			}
+		}
+#endif /* ALPHA_WTINT */
+		die_if_kernel((type == 1 ? "Kernel Bug" : "Instruction fault"),
+			      regs, type, NULL);
+	}
+
+	switch (type) {
+	      case 0: /* breakpoint */
+		if (ptrace_cancel_bpt(current)) {
+			regs->pc -= 4;	/* make pc point to former bpt */
+		}
+
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc,
+			       current);
+		return;
+
+	      case 1: /* bugcheck */
+		send_sig_fault_trapno(SIGTRAP, TRAP_UNK,
+				      (void __user *) regs->pc, 0, current);
+		return;
+		
+	      case 2: /* gentrap */
+		switch ((long) regs->r16) {
+		case GEN_INTOVF:
+			signo = SIGFPE;
+			code = FPE_INTOVF;
+			break;
+		case GEN_INTDIV:
+			signo = SIGFPE;
+			code = FPE_INTDIV;
+			break;
+		case GEN_FLTOVF:
+			signo = SIGFPE;
+			code = FPE_FLTOVF;
+			break;
+		case GEN_FLTDIV:
+			signo = SIGFPE;
+			code = FPE_FLTDIV;
+			break;
+		case GEN_FLTUND:
+			signo = SIGFPE;
+			code = FPE_FLTUND;
+			break;
+		case GEN_FLTINV:
+			signo = SIGFPE;
+			code = FPE_FLTINV;
+			break;
+		case GEN_FLTINE:
+			signo = SIGFPE;
+			code = FPE_FLTRES;
+			break;
+		case GEN_ROPRAND:
+			signo = SIGFPE;
+			code = FPE_FLTUNK;
+			break;
+
+		case GEN_DECOVF:
+		case GEN_DECDIV:
+		case GEN_DECINV:
+		case GEN_ASSERTERR:
+		case GEN_NULPTRERR:
+		case GEN_STKOVF:
+		case GEN_STRLENERR:
+		case GEN_SUBSTRERR:
+		case GEN_RANGERR:
+		case GEN_SUBRNG:
+		case GEN_SUBRNG1:
+		case GEN_SUBRNG2:
+		case GEN_SUBRNG3:
+		case GEN_SUBRNG4:
+		case GEN_SUBRNG5:
+		case GEN_SUBRNG6:
+		case GEN_SUBRNG7:
+		default:
+			signo = SIGTRAP;
+			code = TRAP_UNK;
+			break;
+		}
+
+		send_sig_fault_trapno(signo, code, (void __user *) regs->pc,
+				      regs->r16, current);
+		return;
+
+	      case 4: /* opDEC */
+		if (implver() == IMPLVER_EV4) {
+			long si_code;
+
+			/* The some versions of SRM do not handle
+			   the opDEC properly - they return the PC of the
+			   opDEC fault, not the instruction after as the
+			   Alpha architecture requires.  Here we fix it up.
+			   We do this by intentionally causing an opDEC
+			   fault during the boot sequence and testing if
+			   we get the correct PC.  If not, we set a flag
+			   to correct it every time through.  */
+			regs->pc += opDEC_fix; 
+			
+			/* EV4 does not implement anything except normal
+			   rounding.  Everything else will come here as
+			   an illegal instruction.  Emulate them.  */
+			si_code = alpha_fp_emul(regs->pc - 4);
+			if (si_code == 0)
+				return;
+			if (si_code > 0) {
+				send_sig_fault_trapno(SIGFPE, si_code,
+						      (void __user *) regs->pc,
+						      0, current);
+				return;
+			}
+		}
+		break;
+
+	      case 5: /* illoc */
+	      default: /* unexpected instruction-fault type */
+		      ;
+	}
+
+	send_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc, current);
+}
+
+/* There is an ifdef in the PALcode in MILO that enables a 
+   "kernel debugging entry point" as an unprivileged call_pal.
+
+   We don't want to have anything to do with it, but unfortunately
+   several versions of MILO included in distributions have it enabled,
+   and if we don't put something on the entry point we'll oops.  */
+
+asmlinkage void
+do_entDbg(struct pt_regs *regs)
+{
+	die_if_kernel("Instruction fault", regs, 0, NULL);
+
+	force_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc);
+}
+
+
+/*
+ * entUna has a different register layout to be reasonably simple. It
+ * needs access to all the integer registers (the kernel doesn't use
+ * fp-regs), and it needs to have them in order for simpler access.
+ *
+ * Due to the non-standard register layout (and because we don't want
+ * to handle floating-point regs), user-mode unaligned accesses are
+ * handled separately by do_entUnaUser below.
+ *
+ * Oh, btw, we don't handle the "gp" register correctly, but if we fault
+ * on a gp-register unaligned load/store, something is _very_ wrong
+ * in the kernel anyway..
+ */
+struct allregs {
+	unsigned long regs[32];
+	unsigned long ps, pc, gp, a0, a1, a2;
+};
+
+struct unaligned_stat {
+	unsigned long count, va, pc;
+} unaligned[2];
+
+
+/* Macro for exception fixup code to access integer registers.  */
+#define una_reg(r)  (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+
+
+asmlinkage void
+do_entUna(void * va, unsigned long opcode, unsigned long reg,
+	  struct allregs *regs)
+{
+	long error, tmp1, tmp2, tmp3, tmp4;
+	unsigned long pc = regs->pc - 4;
+	unsigned long *_regs = regs->regs;
+	const struct exception_table_entry *fixup;
+
+	unaligned[0].count++;
+	unaligned[0].va = (unsigned long) va;
+	unaligned[0].pc = pc;
+
+	/* We don't want to use the generic get/put unaligned macros as
+	   we want to trap exceptions.  Only if we actually get an
+	   exception will we decide whether we should have caught it.  */
+
+	switch (opcode) {
+	case 0x0c: /* ldwu */
+		__asm__ __volatile__(
+		"1:	ldq_u %1,0(%3)\n"
+		"2:	ldq_u %2,1(%3)\n"
+		"	extwl %1,%3,%1\n"
+		"	extwh %2,%3,%2\n"
+		"3:\n"
+		EXC(1b,3b,%1,%0)
+		EXC(2b,3b,%2,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+			: "r"(va), "0"(0));
+		if (error)
+			goto got_exception;
+		una_reg(reg) = tmp1|tmp2;
+		return;
+
+	case 0x28: /* ldl */
+		__asm__ __volatile__(
+		"1:	ldq_u %1,0(%3)\n"
+		"2:	ldq_u %2,3(%3)\n"
+		"	extll %1,%3,%1\n"
+		"	extlh %2,%3,%2\n"
+		"3:\n"
+		EXC(1b,3b,%1,%0)
+		EXC(2b,3b,%2,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+			: "r"(va), "0"(0));
+		if (error)
+			goto got_exception;
+		una_reg(reg) = (int)(tmp1|tmp2);
+		return;
+
+	case 0x29: /* ldq */
+		__asm__ __volatile__(
+		"1:	ldq_u %1,0(%3)\n"
+		"2:	ldq_u %2,7(%3)\n"
+		"	extql %1,%3,%1\n"
+		"	extqh %2,%3,%2\n"
+		"3:\n"
+		EXC(1b,3b,%1,%0)
+		EXC(2b,3b,%2,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+			: "r"(va), "0"(0));
+		if (error)
+			goto got_exception;
+		una_reg(reg) = tmp1|tmp2;
+		return;
+
+	/* Note that the store sequences do not indicate that they change
+	   memory because it _should_ be affecting nothing in this context.
+	   (Otherwise we have other, much larger, problems.)  */
+	case 0x0d: /* stw */
+		__asm__ __volatile__(
+		"1:	ldq_u %2,1(%5)\n"
+		"2:	ldq_u %1,0(%5)\n"
+		"	inswh %6,%5,%4\n"
+		"	inswl %6,%5,%3\n"
+		"	mskwh %2,%5,%2\n"
+		"	mskwl %1,%5,%1\n"
+		"	or %2,%4,%2\n"
+		"	or %1,%3,%1\n"
+		"3:	stq_u %2,1(%5)\n"
+		"4:	stq_u %1,0(%5)\n"
+		"5:\n"
+		EXC(1b,5b,%2,%0)
+		EXC(2b,5b,%1,%0)
+		EXC(3b,5b,$31,%0)
+		EXC(4b,5b,$31,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+			  "=&r"(tmp3), "=&r"(tmp4)
+			: "r"(va), "r"(una_reg(reg)), "0"(0));
+		if (error)
+			goto got_exception;
+		return;
+
+	case 0x2c: /* stl */
+		__asm__ __volatile__(
+		"1:	ldq_u %2,3(%5)\n"
+		"2:	ldq_u %1,0(%5)\n"
+		"	inslh %6,%5,%4\n"
+		"	insll %6,%5,%3\n"
+		"	msklh %2,%5,%2\n"
+		"	mskll %1,%5,%1\n"
+		"	or %2,%4,%2\n"
+		"	or %1,%3,%1\n"
+		"3:	stq_u %2,3(%5)\n"
+		"4:	stq_u %1,0(%5)\n"
+		"5:\n"
+		EXC(1b,5b,%2,%0)
+		EXC(2b,5b,%1,%0)
+		EXC(3b,5b,$31,%0)
+		EXC(4b,5b,$31,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+			  "=&r"(tmp3), "=&r"(tmp4)
+			: "r"(va), "r"(una_reg(reg)), "0"(0));
+		if (error)
+			goto got_exception;
+		return;
+
+	case 0x2d: /* stq */
+		__asm__ __volatile__(
+		"1:	ldq_u %2,7(%5)\n"
+		"2:	ldq_u %1,0(%5)\n"
+		"	insqh %6,%5,%4\n"
+		"	insql %6,%5,%3\n"
+		"	mskqh %2,%5,%2\n"
+		"	mskql %1,%5,%1\n"
+		"	or %2,%4,%2\n"
+		"	or %1,%3,%1\n"
+		"3:	stq_u %2,7(%5)\n"
+		"4:	stq_u %1,0(%5)\n"
+		"5:\n"
+		EXC(1b,5b,%2,%0)
+		EXC(2b,5b,%1,%0)
+		EXC(3b,5b,$31,%0)
+		EXC(4b,5b,$31,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+			  "=&r"(tmp3), "=&r"(tmp4)
+			: "r"(va), "r"(una_reg(reg)), "0"(0));
+		if (error)
+			goto got_exception;
+		return;
+	}
+
+	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
+		pc, va, opcode, reg);
+	make_task_dead(SIGSEGV);
+
+got_exception:
+	/* Ok, we caught the exception, but we don't want it.  Is there
+	   someone to pass it along to?  */
+	if ((fixup = search_exception_tables(pc)) != 0) {
+		unsigned long newpc;
+		newpc = fixup_exception(una_reg, fixup, pc);
+
+		printk("Forwarding unaligned exception at %lx (%lx)\n",
+		       pc, newpc);
+
+		regs->pc = newpc;
+		return;
+	}
+
+	/*
+	 * Yikes!  No one to forward the exception to.
+	 * Since the registers are in a weird format, dump them ourselves.
+ 	 */
+
+	printk("%s(%d): unhandled unaligned exception\n",
+	       current->comm, task_pid_nr(current));
+
+	printk("pc = [<%016lx>]  ra = [<%016lx>]  ps = %04lx\n",
+	       pc, una_reg(26), regs->ps);
+	printk("r0 = %016lx  r1 = %016lx  r2 = %016lx\n",
+	       una_reg(0), una_reg(1), una_reg(2));
+	printk("r3 = %016lx  r4 = %016lx  r5 = %016lx\n",
+ 	       una_reg(3), una_reg(4), una_reg(5));
+	printk("r6 = %016lx  r7 = %016lx  r8 = %016lx\n",
+	       una_reg(6), una_reg(7), una_reg(8));
+	printk("r9 = %016lx  r10= %016lx  r11= %016lx\n",
+	       una_reg(9), una_reg(10), una_reg(11));
+	printk("r12= %016lx  r13= %016lx  r14= %016lx\n",
+	       una_reg(12), una_reg(13), una_reg(14));
+	printk("r15= %016lx\n", una_reg(15));
+	printk("r16= %016lx  r17= %016lx  r18= %016lx\n",
+	       una_reg(16), una_reg(17), una_reg(18));
+	printk("r19= %016lx  r20= %016lx  r21= %016lx\n",
+ 	       una_reg(19), una_reg(20), una_reg(21));
+ 	printk("r22= %016lx  r23= %016lx  r24= %016lx\n",
+	       una_reg(22), una_reg(23), una_reg(24));
+	printk("r25= %016lx  r27= %016lx  r28= %016lx\n",
+	       una_reg(25), una_reg(27), una_reg(28));
+	printk("gp = %016lx  sp = %p\n", regs->gp, regs+1);
+
+	dik_show_code((unsigned int *)pc);
+	dik_show_trace((unsigned long *)(regs+1), KERN_DEFAULT);
+
+	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
+		printk("die_if_kernel recursion detected.\n");
+		local_irq_enable();
+		while (1);
+	}
+	make_task_dead(SIGSEGV);
+}
+
+/*
+ * Convert an s-floating point value in memory format to the
+ * corresponding value in register format.  The exponent
+ * needs to be remapped to preserve non-finite values
+ * (infinities, not-a-numbers, denormals).
+ */
+static inline unsigned long
+s_mem_to_reg (unsigned long s_mem)
+{
+	unsigned long frac    = (s_mem >>  0) & 0x7fffff;
+	unsigned long sign    = (s_mem >> 31) & 0x1;
+	unsigned long exp_msb = (s_mem >> 30) & 0x1;
+	unsigned long exp_low = (s_mem >> 23) & 0x7f;
+	unsigned long exp;
+
+	exp = (exp_msb << 10) | exp_low;	/* common case */
+	if (exp_msb) {
+		if (exp_low == 0x7f) {
+			exp = 0x7ff;
+		}
+	} else {
+		if (exp_low == 0x00) {
+			exp = 0x000;
+		} else {
+			exp |= (0x7 << 7);
+		}
+	}
+	return (sign << 63) | (exp << 52) | (frac << 29);
+}
+
+/*
+ * Convert an s-floating point value in register format to the
+ * corresponding value in memory format.
+ */
+static inline unsigned long
+s_reg_to_mem (unsigned long s_reg)
+{
+	return ((s_reg >> 62) << 30) | ((s_reg << 5) >> 34);
+}
+
+/*
+ * Handle user-level unaligned fault.  Handling user-level unaligned
+ * faults is *extremely* slow and produces nasty messages.  A user
+ * program *should* fix unaligned faults ASAP.
+ *
+ * Notice that we have (almost) the regular kernel stack layout here,
+ * so finding the appropriate registers is a little more difficult
+ * than in the kernel case.
+ *
+ * Finally, we handle regular integer load/stores only.  In
+ * particular, load-linked/store-conditionally and floating point
+ * load/stores are not supported.  The former make no sense with
+ * unaligned faults (they are guaranteed to fail) and I don't think
+ * the latter will occur in any decent program.
+ *
+ * Sigh. We *do* have to handle some FP operations, because GCC will
+ * uses them as temporary storage for integer memory to memory copies.
+ * However, we need to deal with stt/ldt and sts/lds only.
+ */
+
+#define OP_INT_MASK	( 1L << 0x28 | 1L << 0x2c   /* ldl stl */	\
+			| 1L << 0x29 | 1L << 0x2d   /* ldq stq */	\
+			| 1L << 0x0c | 1L << 0x0d   /* ldwu stw */	\
+			| 1L << 0x0a | 1L << 0x0e ) /* ldbu stb */
+
+#define OP_WRITE_MASK	( 1L << 0x26 | 1L << 0x27   /* sts stt */	\
+			| 1L << 0x2c | 1L << 0x2d   /* stl stq */	\
+			| 1L << 0x0d | 1L << 0x0e ) /* stw stb */
+
+#define R(x)	((size_t) &((struct pt_regs *)0)->x)
+
+static int unauser_reg_offsets[32] = {
+	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
+	/* r9 ... r15 are stored in front of regs.  */
+	-56, -48, -40, -32, -24, -16, -8,
+	R(r16), R(r17), R(r18),
+	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
+	R(r27), R(r28), R(gp),
+	0, 0
+};
+
+#undef R
+
+asmlinkage void
+do_entUnaUser(void __user * va, unsigned long opcode,
+	      unsigned long reg, struct pt_regs *regs)
+{
+	static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
+
+	unsigned long tmp1, tmp2, tmp3, tmp4;
+	unsigned long fake_reg, *reg_addr = &fake_reg;
+	int si_code;
+	long error;
+
+	/* Check the UAC bits to decide what the user wants us to do
+	   with the unaligned access.  */
+
+	if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
+		if (__ratelimit(&ratelimit)) {
+			printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
+			       current->comm, task_pid_nr(current),
+			       regs->pc - 4, va, opcode, reg);
+		}
+	}
+	if ((current_thread_info()->status & TS_UAC_SIGBUS))
+		goto give_sigbus;
+	/* Not sure why you'd want to use this, but... */
+	if ((current_thread_info()->status & TS_UAC_NOFIX))
+		return;
+
+	/* Don't bother reading ds in the access check since we already
+	   know that this came from the user.  Also rely on the fact that
+	   the page at TASK_SIZE is unmapped and so can't be touched anyway. */
+	if ((unsigned long)va >= TASK_SIZE)
+		goto give_sigsegv;
+
+	++unaligned[1].count;
+	unaligned[1].va = (unsigned long)va;
+	unaligned[1].pc = regs->pc - 4;
+
+	if ((1L << opcode) & OP_INT_MASK) {
+		/* it's an integer load/store */
+		if (reg < 30) {
+			reg_addr = (unsigned long *)
+			  ((char *)regs + unauser_reg_offsets[reg]);
+		} else if (reg == 30) {
+			/* usp in PAL regs */
+			fake_reg = rdusp();
+		} else {
+			/* zero "register" */
+			fake_reg = 0;
+		}
+	}
+
+	/* We don't want to use the generic get/put unaligned macros as
+	   we want to trap exceptions.  Only if we actually get an
+	   exception will we decide whether we should have caught it.  */
+
+	switch (opcode) {
+	case 0x0c: /* ldwu */
+		__asm__ __volatile__(
+		"1:	ldq_u %1,0(%3)\n"
+		"2:	ldq_u %2,1(%3)\n"
+		"	extwl %1,%3,%1\n"
+		"	extwh %2,%3,%2\n"
+		"3:\n"
+		EXC(1b,3b,%1,%0)
+		EXC(2b,3b,%2,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+			: "r"(va), "0"(0));
+		if (error)
+			goto give_sigsegv;
+		*reg_addr = tmp1|tmp2;
+		break;
+
+	case 0x22: /* lds */
+		__asm__ __volatile__(
+		"1:	ldq_u %1,0(%3)\n"
+		"2:	ldq_u %2,3(%3)\n"
+		"	extll %1,%3,%1\n"
+		"	extlh %2,%3,%2\n"
+		"3:\n"
+		EXC(1b,3b,%1,%0)
+		EXC(2b,3b,%2,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+			: "r"(va), "0"(0));
+		if (error)
+			goto give_sigsegv;
+		alpha_write_fp_reg(reg, s_mem_to_reg((int)(tmp1|tmp2)));
+		return;
+
+	case 0x23: /* ldt */
+		__asm__ __volatile__(
+		"1:	ldq_u %1,0(%3)\n"
+		"2:	ldq_u %2,7(%3)\n"
+		"	extql %1,%3,%1\n"
+		"	extqh %2,%3,%2\n"
+		"3:\n"
+		EXC(1b,3b,%1,%0)
+		EXC(2b,3b,%2,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+			: "r"(va), "0"(0));
+		if (error)
+			goto give_sigsegv;
+		alpha_write_fp_reg(reg, tmp1|tmp2);
+		return;
+
+	case 0x28: /* ldl */
+		__asm__ __volatile__(
+		"1:	ldq_u %1,0(%3)\n"
+		"2:	ldq_u %2,3(%3)\n"
+		"	extll %1,%3,%1\n"
+		"	extlh %2,%3,%2\n"
+		"3:\n"
+		EXC(1b,3b,%1,%0)
+		EXC(2b,3b,%2,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+			: "r"(va), "0"(0));
+		if (error)
+			goto give_sigsegv;
+		*reg_addr = (int)(tmp1|tmp2);
+		break;
+
+	case 0x29: /* ldq */
+		__asm__ __volatile__(
+		"1:	ldq_u %1,0(%3)\n"
+		"2:	ldq_u %2,7(%3)\n"
+		"	extql %1,%3,%1\n"
+		"	extqh %2,%3,%2\n"
+		"3:\n"
+		EXC(1b,3b,%1,%0)
+		EXC(2b,3b,%2,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+			: "r"(va), "0"(0));
+		if (error)
+			goto give_sigsegv;
+		*reg_addr = tmp1|tmp2;
+		break;
+
+	/* Note that the store sequences do not indicate that they change
+	   memory because it _should_ be affecting nothing in this context.
+	   (Otherwise we have other, much larger, problems.)  */
+	case 0x0d: /* stw */
+		__asm__ __volatile__(
+		"1:	ldq_u %2,1(%5)\n"
+		"2:	ldq_u %1,0(%5)\n"
+		"	inswh %6,%5,%4\n"
+		"	inswl %6,%5,%3\n"
+		"	mskwh %2,%5,%2\n"
+		"	mskwl %1,%5,%1\n"
+		"	or %2,%4,%2\n"
+		"	or %1,%3,%1\n"
+		"3:	stq_u %2,1(%5)\n"
+		"4:	stq_u %1,0(%5)\n"
+		"5:\n"
+		EXC(1b,5b,%2,%0)
+		EXC(2b,5b,%1,%0)
+		EXC(3b,5b,$31,%0)
+		EXC(4b,5b,$31,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+			  "=&r"(tmp3), "=&r"(tmp4)
+			: "r"(va), "r"(*reg_addr), "0"(0));
+		if (error)
+			goto give_sigsegv;
+		return;
+
+	case 0x26: /* sts */
+		fake_reg = s_reg_to_mem(alpha_read_fp_reg(reg));
+		fallthrough;
+
+	case 0x2c: /* stl */
+		__asm__ __volatile__(
+		"1:	ldq_u %2,3(%5)\n"
+		"2:	ldq_u %1,0(%5)\n"
+		"	inslh %6,%5,%4\n"
+		"	insll %6,%5,%3\n"
+		"	msklh %2,%5,%2\n"
+		"	mskll %1,%5,%1\n"
+		"	or %2,%4,%2\n"
+		"	or %1,%3,%1\n"
+		"3:	stq_u %2,3(%5)\n"
+		"4:	stq_u %1,0(%5)\n"
+		"5:\n"
+		EXC(1b,5b,%2,%0)
+		EXC(2b,5b,%1,%0)
+		EXC(3b,5b,$31,%0)
+		EXC(4b,5b,$31,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+			  "=&r"(tmp3), "=&r"(tmp4)
+			: "r"(va), "r"(*reg_addr), "0"(0));
+		if (error)
+			goto give_sigsegv;
+		return;
+
+	case 0x27: /* stt */
+		fake_reg = alpha_read_fp_reg(reg);
+		fallthrough;
+
+	case 0x2d: /* stq */
+		__asm__ __volatile__(
+		"1:	ldq_u %2,7(%5)\n"
+		"2:	ldq_u %1,0(%5)\n"
+		"	insqh %6,%5,%4\n"
+		"	insql %6,%5,%3\n"
+		"	mskqh %2,%5,%2\n"
+		"	mskql %1,%5,%1\n"
+		"	or %2,%4,%2\n"
+		"	or %1,%3,%1\n"
+		"3:	stq_u %2,7(%5)\n"
+		"4:	stq_u %1,0(%5)\n"
+		"5:\n"
+		EXC(1b,5b,%2,%0)
+		EXC(2b,5b,%1,%0)
+		EXC(3b,5b,$31,%0)
+		EXC(4b,5b,$31,%0)
+			: "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+			  "=&r"(tmp3), "=&r"(tmp4)
+			: "r"(va), "r"(*reg_addr), "0"(0));
+		if (error)
+			goto give_sigsegv;
+		return;
+
+	default:
+		/* What instruction were you trying to use, exactly?  */
+		goto give_sigbus;
+	}
+
+	/* Only integer loads should get here; everyone else returns early. */
+	if (reg == 30)
+		wrusp(fake_reg);
+	return;
+
+give_sigsegv:
+	regs->pc -= 4;  /* make pc point to faulting insn */
+
+	/* We need to replicate some of the logic in mm/fault.c,
+	   since we don't have access to the fault code in the
+	   exception handling return path.  */
+	if ((unsigned long)va >= TASK_SIZE)
+		si_code = SEGV_ACCERR;
+	else {
+		struct mm_struct *mm = current->mm;
+		mmap_read_lock(mm);
+		if (find_vma(mm, (unsigned long)va))
+			si_code = SEGV_ACCERR;
+		else
+			si_code = SEGV_MAPERR;
+		mmap_read_unlock(mm);
+	}
+	send_sig_fault(SIGSEGV, si_code, va, current);
+	return;
+
+give_sigbus:
+	regs->pc -= 4;
+	send_sig_fault(SIGBUS, BUS_ADRALN, va, current);
+	return;
+}
+
+void
+trap_init(void)
+{
+	/* Tell PAL-code what global pointer we want in the kernel.  */
+	register unsigned long gptr __asm__("$29");
+	wrkgp(gptr);
+
+	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
+	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
+	if (implver() == IMPLVER_EV4)
+		opDEC_check();
+
+	wrent(entArith, 1);
+	wrent(entMM, 2);
+	wrent(entIF, 3);
+	wrent(entUna, 4);
+	wrent(entSys, 5);
+	wrent(entDbg, 6);
+}
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
new file mode 100644
index 0000000000..2efa7dfc79
--- /dev/null
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define EMITS_PT_NOTE
+#define RO_EXCEPTION_TABLE_ALIGN	16
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+OUTPUT_FORMAT("elf64-alpha")
+OUTPUT_ARCH(alpha)
+ENTRY(__start)
+PHDRS { text PT_LOAD; note PT_NOTE; }
+jiffies = jiffies_64;
+SECTIONS
+{
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+	. = 0xfffffc0000310000;
+#else
+	. = 0xfffffc0001010000;
+#endif
+
+	_text = .;	/* Text and read-only data */
+	.text : {
+		HEAD_TEXT
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+		*(.fixup)
+		*(.gnu.warning)
+	} :text
+	swapper_pg_dir = SWAPPER_PGD;
+	_etext = .;	/* End of text section */
+
+	RO_DATA(4096)
+
+	/* Will be freed after init */
+	__init_begin = ALIGN(PAGE_SIZE);
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
+	PERCPU_SECTION(L1_CACHE_BYTES)
+	/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
+	   needed for the THREAD_SIZE aligned init_task gets freed after init */
+	. = ALIGN(THREAD_SIZE);
+	__init_end = .;
+	/* Freed after init ends here */
+
+	_sdata = .;	/* Start of rw data section */
+	_data = .;
+	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+
+	.got : {
+		*(.got)
+	}
+	.sdata : {
+		*(.sdata)
+	}
+	_edata = .;	/* End of data section */
+
+	BSS_SECTION(0, 0, 0)
+	_end = .;
+
+	.mdebug 0 : {
+		*(.mdebug)
+	}
+	.note 0 : {
+		*(.note)
+	}
+
+	STABS_DEBUG
+	DWARF_DEBUG
+	ELF_DETAILS
+
+	DISCARDS
+}