Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 346 insertions, 0 deletions

diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
new file mode 100644
index 0000000000..a2d10c29fb
--- /dev/null
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+#
+
+menuconfig ARC_SOC_HSDK
+	bool "ARC HS Development Kit SOC"
+	depends on ISA_ARCV2
+	select ARC_HAS_ACCL_REGS
+	select ARC_IRQ_NO_AUTOSAVE
+	select ARC_FPU_SAVE_RESTORE
+	select CLK_HSDK
+	select RESET_CONTROLLER
+	select RESET_HSDK
+	select HAVE_PCI
diff --git a/arch/arc/plat-hsdk/Makefile b/arch/arc/plat-hsdk/Makefile
new file mode 100644
index 0000000000..bb2921e824
--- /dev/null
+++ b/arch/arc/plat-hsdk/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+#
+
+obj-y := platform.o
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
new file mode 100644
index 0000000000..c4a875b223
--- /dev/null
+++ b/arch/arc/plat-hsdk/platform.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARC HSDK Platform support code
+ *
+ * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/init.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
+#include <linux/smp.h>
+#include <asm/arcregs.h>
+#include <asm/io.h>
+#include <asm/mach_desc.h>
+
+int arc_hsdk_axi_dmac_coherent __section(".data") = 0;
+
+#define ARC_CCM_UNUSED_ADDR	0x60000000
+
+
+#define ARC_PERIPHERAL_BASE	0xf0000000
+#define CREG_BASE		(ARC_PERIPHERAL_BASE + 0x1000)
+
+#define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0xA000)
+#define SDIO_UHS_REG_EXT	(SDIO_BASE + 0x108)
+#define SDIO_UHS_REG_EXT_DIV_2	(2 << 30)
+
+#define HSDK_GPIO_INTC          (ARC_PERIPHERAL_BASE + 0x3000)
+
+static void __init hsdk_enable_gpio_intc_wire(void)
+{
+	/*
+	 * Peripherals on CPU Card are wired to cpu intc via intermediate
+	 * DW APB GPIO blocks (mainly for debouncing)
+	 *
+	 *         ---------------------
+	 *        |  snps,archs-intc  |
+	 *        ---------------------
+	 *                  |
+	 *        ----------------------
+	 *        | snps,archs-idu-intc |
+	 *        ----------------------
+	 *         |   |     |   |    |
+	 *         | [eth] [USB]    [... other peripherals]
+	 *         |
+	 * -------------------
+	 * | snps,dw-apb-intc |
+	 * -------------------
+	 *  |      |   |   |
+	 * [Bt] [HAPS]   [... other peripherals]
+	 *
+	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
+	 * with stacked INTCs. In particular problem happens if its master INTC
+	 * not yet instantiated. See discussion here -
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
+	 *
+	 * So setup the first gpio block as a passive pass thru and hide it from
+	 * DT hardware topology - connect intc directly to cpu intc
+	 * The GPIO "wire" needs to be init nevertheless (here)
+	 *
+	 * One side adv is that peripheral interrupt handling avoids one nested
+	 * intc ISR hop
+	 *
+	 * According to HSDK User's Manual [1], "Table 2 Interrupt Mapping"
+	 * we have the following GPIO input lines used as sources of interrupt:
+	 * - GPIO[0] - Bluetooth interrupt of RS9113 module
+	 * - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector)
+	 * - GPIO[3] - Audio codec (MAX9880A) interrupt
+	 * - GPIO[8-23] - Available on Arduino and PMOD_x headers
+	 * For now there's no use of Arduino and PMOD_x headers in Linux
+	 * use-case so we only enable lines 0, 2 and 3.
+	 *
+	 * [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf
+	 */
+#define GPIO_INTEN              (HSDK_GPIO_INTC + 0x30)
+#define GPIO_INTMASK            (HSDK_GPIO_INTC + 0x34)
+#define GPIO_INTTYPE_LEVEL      (HSDK_GPIO_INTC + 0x38)
+#define GPIO_INT_POLARITY       (HSDK_GPIO_INTC + 0x3c)
+#define GPIO_INT_CONNECTED_MASK	0x0d
+
+	iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK);
+	iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK);
+	iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL);
+	iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY);
+	iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN);
+}
+
+static int __init hsdk_tweak_node_coherency(const char *path, bool coherent)
+{
+	void *fdt = initial_boot_params;
+	const void *prop;
+	int node, ret;
+	bool dt_coh_set;
+
+	node = fdt_path_offset(fdt, path);
+	if (node < 0)
+		goto tweak_fail;
+
+	prop = fdt_getprop(fdt, node, "dma-coherent", &ret);
+	if (!prop && ret != -FDT_ERR_NOTFOUND)
+		goto tweak_fail;
+
+	dt_coh_set = ret != -FDT_ERR_NOTFOUND;
+	ret = 0;
+
+	/* need to remove "dma-coherent" property */
+	if (dt_coh_set && !coherent)
+		ret = fdt_delprop(fdt, node, "dma-coherent");
+
+	/* need to set "dma-coherent" property */
+	if (!dt_coh_set && coherent)
+		ret = fdt_setprop(fdt, node, "dma-coherent", NULL, 0);
+
+	if (ret < 0)
+		goto tweak_fail;
+
+	return 0;
+
+tweak_fail:
+	pr_err("failed to tweak %s to %scoherent\n", path, coherent ? "" : "non");
+	return -EFAULT;
+}
+
+enum hsdk_axi_masters {
+	M_HS_CORE = 0,
+	M_HS_RTT,
+	M_AXI_TUN,
+	M_HDMI_VIDEO,
+	M_HDMI_AUDIO,
+	M_USB_HOST,
+	M_ETHERNET,
+	M_SDIO,
+	M_GPU,
+	M_DMAC_0,
+	M_DMAC_1,
+	M_DVFS
+};
+
+#define UPDATE_VAL	1
+
+/*
+ * This is modified configuration of AXI bridge. Default settings
+ * are specified in "Table 111 CREG Address Decoder register reset values".
+ *
+ * AXI_M_m_SLV{0|1} - Slave Select register for master 'm'.
+ * Possible slaves are:
+ *  - 0  => no slave selected
+ *  - 1  => DDR controller port #1
+ *  - 2  => SRAM controller
+ *  - 3  => AXI tunnel
+ *  - 4  => EBI controller
+ *  - 5  => ROM controller
+ *  - 6  => AXI2APB bridge
+ *  - 7  => DDR controller port #2
+ *  - 8  => DDR controller port #3
+ *  - 9  => HS38x4 IOC
+ *  - 10 => HS38x4 DMI
+ * AXI_M_m_OFFSET{0|1} - Addr Offset register for master 'm'
+ *
+ * Please read ARC HS Development IC Specification, section 17.2 for more
+ * information about apertures configuration.
+ *
+ * m	master		AXI_M_m_SLV0	AXI_M_m_SLV1	AXI_M_m_OFFSET0	AXI_M_m_OFFSET1
+ * 0	HS (CBU)	0x11111111	0x63111111	0xFEDCBA98	0x0E543210
+ * 1	HS (RTT)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 2	AXI Tunnel	0x88888888	0x88888888	0xFEDCBA98	0x76543210
+ * 3	HDMI-VIDEO	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 4	HDMI-ADUIO	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 5	USB-HOST	0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 6	ETHERNET	0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 7	SDIO		0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 8	GPU		0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 9	DMAC (port #1)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 10	DMAC (port #2)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 11	DVFS		0x00000000	0x60000000	0x00000000	0x00000000
+ */
+
+#define CREG_AXI_M_SLV0(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m)))
+#define CREG_AXI_M_SLV1(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x04))
+#define CREG_AXI_M_OFT0(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x08))
+#define CREG_AXI_M_OFT1(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x0C))
+#define CREG_AXI_M_UPDT(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x14))
+
+#define CREG_AXI_M_HS_CORE_BOOT	((void __iomem *)(CREG_BASE + 0x010))
+
+#define CREG_PAE		((void __iomem *)(CREG_BASE + 0x180))
+#define CREG_PAE_UPDT		((void __iomem *)(CREG_BASE + 0x194))
+
+static void __init hsdk_init_memory_bridge_axi_dmac(void)
+{
+	bool coherent = !!arc_hsdk_axi_dmac_coherent;
+	u32 axi_m_slv1, axi_m_oft1;
+
+	/*
+	 * Don't tweak memory bridge configuration if we failed to tweak DTB
+	 * as we will end up in a inconsistent state.
+	 */
+	if (hsdk_tweak_node_coherency("/soc/dmac@80000", coherent))
+		return;
+
+	if (coherent) {
+		axi_m_slv1 = 0x77999999;
+		axi_m_oft1 = 0x76DCBA98;
+	} else {
+		axi_m_slv1 = 0x77777777;
+		axi_m_oft1 = 0x76543210;
+	}
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_0));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_0));
+	writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_0));
+	writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_0));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_0));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_1));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_1));
+	writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_1));
+	writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_1));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_1));
+}
+
+static void __init hsdk_init_memory_bridge(void)
+{
+	u32 reg;
+
+	/*
+	 * M_HS_CORE has one unique register - BOOT.
+	 * We need to clean boot mirror (BOOT[1:0]) bits in them to avoid first
+	 * aperture to be masked by 'boot mirror'.
+	 */
+	reg = readl(CREG_AXI_M_HS_CORE_BOOT) & (~0x3);
+	writel(reg, CREG_AXI_M_HS_CORE_BOOT);
+	writel(0x11111111, CREG_AXI_M_SLV0(M_HS_CORE));
+	writel(0x63111111, CREG_AXI_M_SLV1(M_HS_CORE));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_CORE));
+	writel(0x0E543210, CREG_AXI_M_OFT1(M_HS_CORE));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_CORE));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HS_RTT));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HS_RTT));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_RTT));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HS_RTT));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_RTT));
+
+	writel(0x88888888, CREG_AXI_M_SLV0(M_AXI_TUN));
+	writel(0x88888888, CREG_AXI_M_SLV1(M_AXI_TUN));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_AXI_TUN));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_AXI_TUN));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_AXI_TUN));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_VIDEO));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_VIDEO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_VIDEO));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_VIDEO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_VIDEO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_AUDIO));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_AUDIO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_AUDIO));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_AUDIO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_AUDIO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_USB_HOST));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_USB_HOST));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_USB_HOST));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_USB_HOST));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_USB_HOST));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_ETHERNET));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_ETHERNET));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_ETHERNET));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_ETHERNET));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_ETHERNET));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_SDIO));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_SDIO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_SDIO));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_SDIO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_SDIO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_GPU));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_GPU));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_GPU));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_GPU));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_GPU));
+
+	writel(0x00000000, CREG_AXI_M_SLV0(M_DVFS));
+	writel(0x60000000, CREG_AXI_M_SLV1(M_DVFS));
+	writel(0x00000000, CREG_AXI_M_OFT0(M_DVFS));
+	writel(0x00000000, CREG_AXI_M_OFT1(M_DVFS));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DVFS));
+
+	hsdk_init_memory_bridge_axi_dmac();
+
+	/*
+	 * PAE remapping for DMA clients does not work due to an RTL bug, so
+	 * CREG_PAE register must be programmed to all zeroes, otherwise it
+	 * will cause problems with DMA to/from peripherals even if PAE40 is
+	 * not used.
+	 */
+	writel(0x00000000, CREG_PAE);
+	writel(UPDATE_VAL, CREG_PAE_UPDT);
+}
+
+static void __init hsdk_init_early(void)
+{
+	hsdk_init_memory_bridge();
+
+	/*
+	 * Switch SDIO external ciu clock divider from default div-by-8 to
+	 * minimum possible div-by-2.
+	 */
+	iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
+
+	hsdk_enable_gpio_intc_wire();
+}
+
+static const char *hsdk_compat[] __initconst = {
+	"snps,hsdk",
+	NULL,
+};
+
+MACHINE_START(SIMULATION, "hsdk")
+	.dt_compat	= hsdk_compat,
+	.init_early     = hsdk_init_early,
+MACHINE_END