diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:12 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:12 +0000 |
commit | 8665bd53f2f2e27e5511d90428cb3f60e6d0ce15 (patch) | |
tree | 8d58900dc0ebd4a3011f92c128d2fe45bc7c4bf2 /arch/arm/boot/dts/nxp/vf | |
parent | Adding debian version 6.7.12-1. (diff) | |
download | linux-8665bd53f2f2e27e5511d90428cb3f60e6d0ce15.tar.xz linux-8665bd53f2f2e27e5511d90428cb3f60e6d0ce15.zip |
Merging upstream version 6.8.9.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/boot/dts/nxp/vf')
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf610-bk4.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts | 14 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts | 70 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts | 18 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts | 20 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts | 18 |
8 files changed, 76 insertions, 76 deletions
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi index 14c411f146..5a19da9313 100644 --- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi @@ -55,7 +55,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_3v3>; - status = "okay"; + status = "okay"; }; &dcu0 { diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts index e4f691d601..722182f5fd 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts @@ -68,7 +68,7 @@ #address-cells = <1>; #size-cells = <0>; /* PTD12 ->RPIO[91] */ - sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; /* PTD10 ->RPIO[89] */ miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; num-chipselects = <0>; @@ -79,7 +79,7 @@ gpio-controller; #gpio-cells = <2>; /* PTB18 -> RGPIO[40] */ - load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; spi-max-frequency = <100000>; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 1a19aec895..7e72f860c3 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -162,7 +162,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6085"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -173,26 +173,26 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "eth_cu_1000_1"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_2"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -200,7 +200,7 @@ sfp = <&sff>; }; - port@6 { + ethernet-port@6 { reg = <6>; phy-mode = "rmii"; ethernet = <&fec1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index a248b8a453..029f49be40 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -294,11 +294,11 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW - &gpio1 8 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW + &gpio1 8 GPIO_ACTIVE_HIGH>; num-chipselects = <2>; flash@0 { diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index df1335492a..77492eeea4 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -47,17 +47,17 @@ #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -68,37 +68,37 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "aib2main_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "aib2main_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_5"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_6"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_7"; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "modem_pic"; @@ -108,7 +108,7 @@ }; }; - switch0port10: port@10 { + switch0port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -130,32 +130,32 @@ #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_100_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_100_3"; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "xgmii"; @@ -168,7 +168,7 @@ }; }; - switch1port10: port@10 { + switch1port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -188,17 +188,17 @@ #address-cells = <1>; #size-cells = <0>; - switch2: switch2@0 { + switch2: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 2>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_2"; phy-mode = "1000base-x"; @@ -206,7 +206,7 @@ sfp = <&sff1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_3"; phy-mode = "1000base-x"; @@ -214,7 +214,7 @@ sfp = <&sff2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_4"; phy-mode = "1000base-x"; @@ -222,7 +222,7 @@ sfp = <&sff3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_5"; phy-mode = "1000base-x"; @@ -230,7 +230,7 @@ sfp = <&sff4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_fc_1000_6"; phy-mode = "1000base-x"; @@ -238,7 +238,7 @@ sfp = <&sff5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "eth_fc_1000_7"; phy-mode = "1000base-x"; @@ -246,7 +246,7 @@ sfp = <&sff6>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -254,7 +254,7 @@ sfp = <&sff0>; }; - switch2port10: port@10 { + switch2port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "2500base-x"; @@ -276,17 +276,17 @@ #address-cells = <1>; #size-cells = <0>; - switch3: switch3@0 { + switch3: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 3>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_8"; phy-mode = "1000base-x"; @@ -294,7 +294,7 @@ sfp = <&sff7>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_9"; phy-mode = "1000base-x"; @@ -302,7 +302,7 @@ sfp = <&sff8>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_10"; phy-mode = "1000base-x"; @@ -310,7 +310,7 @@ sfp = <&sff9>; }; - switch3port9: port@9 { + switch3port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "2500base-x"; @@ -322,7 +322,7 @@ }; }; - switch3port10: port@10 { + switch3port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 1461804eca..2a49046466 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -123,7 +123,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -134,11 +134,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -149,32 +149,32 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 463c2452b9..078d8699e1 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -112,7 +112,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -123,11 +123,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -138,27 +138,27 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_100_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_5"; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "eth_cu_1000_1"; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_cu_1000_2"; phy-handle = <&phy9>; @@ -167,12 +167,12 @@ }; }; - mdio1 { + mdio-external { compatible = "marvell,mv88e6xxx-mdio-external"; #address-cells = <1>; #size-cells = <0>; - phy9: phy9@0 { + phy9: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; pinctrl-0 = <&pinctrl_gpio_phy9>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index f5ae0d5de3..22c8f44390 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -137,7 +137,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -148,11 +148,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -163,32 +163,32 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; |