Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 144 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/synaptics/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/synaptics/berlin2q-marvell-dmp.dts
new file mode 100644
index 0000000000..c162f98cb8
--- /dev/null
+++ b/arch/arm/boot/dts/synaptics/berlin2q-marvell-dmp.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "berlin2q.dtsi"
+
+/ {
+	model = "Marvell BG2-Q DMP";
+	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator_usb0 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator_usb1 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb2_vbus: regulator_usb2 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_sdio1_vmmc: regulator_sdio1_vmmc {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vmmc";
+			enable-active-high;
+			regulator-boot-on;
+			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_sdio1_vqmmc: regulator_sido1_vqmmc {
+			compatible = "regulator-gpio";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vqmmc";
+			regulator-type = "voltage";
+			enable-active-high;
+			gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
+			states = <3300000 0x1
+				  1800000 0x0>;
+		};
+	};
+};
+
+&soc_pinctrl {
+	sd1gpio_pmux: sd1pwr-pmux {
+		groups = "G23", "G32";
+		function = "gpio";
+	};
+};
+
+&sdhci1 {
+	vmmc-supply = <&reg_sdio1_vmmc>;
+	vqmmc-supply = <&reg_sdio1_vqmmc>;
+	cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy2 {
+	status = "okay";
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb2 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};