diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:03 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:03 +0000 |
commit | 01a69402cf9d38ff180345d55c2ee51c7e89fbc7 (patch) | |
tree | b406c5242a088c4f59c6e4b719b783f43aca6ae9 /arch/arm/boot/dts | |
parent | Adding upstream version 6.7.12. (diff) | |
download | linux-01a69402cf9d38ff180345d55c2ee51c7e89fbc7.tar.xz linux-01a69402cf9d38ff180345d55c2ee51c7e89fbc7.zip |
Adding upstream version 6.8.9.upstream/6.8.9
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/boot/dts')
221 files changed, 5517 insertions, 1791 deletions
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi index 98817a6675..d233a191c1 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm2835-rpi.dtsi" +#include <dt-bindings/power/raspberrypi-power.h> #include <dt-bindings/reset/raspberrypi,firmware-reset.h> / { @@ -76,3 +77,7 @@ &vchiq { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; + +&xhci { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi index 4a379a1496..22c7f15613 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi @@ -604,6 +604,20 @@ }; }; + xhci: usb@7e9c0000 { + compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2"; + reg = <0x0 0x7e9c0000 0x100000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + /* DWC2 and this IP block share the same USB PHY, + * enabling both at the same time results in lockups. + * So keep this node disabled and let the bootloader + * decide which interface should be enabled. + */ + status = "disabled"; + }; + v3d: gpu@7ec00000 { compatible = "brcm,2711-v3d"; reg = <0x0 0x7ec00000 0x4000>, diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi index 93281c47c9..4ef0228361 100644 --- a/arch/arm/boot/dts/broadcom/bcm63138.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi @@ -232,6 +232,12 @@ interrupt-names = "nand"; }; + serial@4400 { + compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart"; + reg = <0x4400 0x1e0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + bootlut: bootlut@8000 { compatible = "brcm,bcm63138-bootlut"; reg = <0x8000 0x50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi index 4c1d140f40..35be14150f 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi @@ -768,7 +768,7 @@ status = "disabled"; }; - nand0: nand@ff900000 { + nand0: nand-controller@ff900000 { #address-cells = <0x1>; #size-cells = <0x0>; compatible = "altr,socfpga-denali-nand"; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi index f36063c57c..6b6e77596f 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi @@ -669,7 +669,7 @@ status = "disabled"; }; - nand: nand@ffb90000 { + nand: nand-controller@ffb90000 { #address-cells = <1>; #size-cells = <0>; compatible = "altr,socfpga-denali-nand"; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts index 11ccdc6c2d..0434f1c7b6 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts @@ -17,8 +17,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <3>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts index c48385702a..7342f5942b 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts @@ -124,8 +124,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts index c7f5fa0ba0..d37a982e85 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts @@ -129,8 +129,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts index 3dd99c7c95..9e4db7407f 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts @@ -174,8 +174,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts index 2564671fc1..ce0d6514ee 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts @@ -121,8 +121,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts index e0630b0eed..65f390bf89 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts @@ -229,8 +229,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; @@ -246,8 +244,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts index 1b241da11e..f23f6b3fc8 100644 --- a/arch/arm/boot/dts/marvell/armada-370-rd.dts +++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts @@ -95,7 +95,7 @@ gpio-fan { compatible = "gpio-fan"; gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 3000 1>; + gpio-fan,speed-map = <0 0>, <3000 1>; pinctrl-0 = <&fan_pins>; pinctrl-names = "default"; }; diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts index 8dd242e668..6ec3dd3337 100644 --- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts +++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts @@ -25,9 +25,9 @@ gpio-fan { gpio-fan,speed-map = - < 0 3 - 950 2 - 1400 1 - 1800 0>; + < 0 3>, + < 950 2>, + <1400 1>, + <1800 0>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts index 370ca9c432..3011578a31 100644 --- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts +++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts @@ -106,10 +106,10 @@ gpio-fan { gpio-fan,speed-map = - < 0 3 - 800 2 - 1050 1 - 1300 0>; + < 0 3>, + < 800 2>, + <1050 1>, + <1300 0>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts index b07d11d1f1..02599a3e98 100644 --- a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts @@ -113,14 +113,14 @@ &gpio2 0 GPIO_ACTIVE_HIGH &gpio2 1 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 1000 1 - 1150 2 - 1350 4 - 1500 3 - 1650 5 - 1750 6 - 1900 7 >; + gpio-fan,speed-map = < 0 0>, + <1000 1>, + <1150 2>, + <1350 4>, + <1500 3>, + <1650 5>, + <1750 6>, + <1900 7>; }; gpio-leds { diff --git a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts index ea91ff964d..6caa5c5017 100644 --- a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts @@ -131,14 +131,14 @@ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>, <&gpio1 17 GPIO_ACTIVE_HIGH>, <&gpio1 16 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 1500 1 - 2500 2 - 3000 3 - 3400 4 - 3700 5 - 3900 6 - 4000 7>; + gpio-fan,speed-map = < 0 0>, + <1500 1>, + <2500 2>, + <3000 3>, + <3400 4>, + <3700 5>, + <3900 6>, + <4000 7>; #cooling-cells = <2>; }; diff --git a/arch/arm/boot/dts/marvell/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts index e2ba50520b..1de0a172aa 100644 --- a/arch/arm/boot/dts/marvell/armada-388-gp.dts +++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts @@ -237,8 +237,8 @@ gpio-fan { compatible = "gpio-fan"; gpios = <&expander1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 3000 1>; + gpio-fan,speed-map = < 0 0>, + <3000 1>; }; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi index eb917462b2..0738eb679f 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi @@ -38,9 +38,9 @@ pinctrl-names = "default"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH &gpio1 13 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 - 3000 1 - 6000 2>; + gpio-fan,speed-map = <0 0>, + <3000 1>, + <6000 2>; }; gpio_poweroff { diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi index 377b6e9702..dfac2045a1 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi @@ -118,10 +118,11 @@ gpios = <&gpio0 17 GPIO_ACTIVE_LOW &gpio0 16 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; + gpio-fan,speed-map = + < 0 3>, + <1500 2>, + <3250 1>, + <5000 0>; alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts index c6024b5694..0425df8cb9 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts @@ -69,10 +69,11 @@ gpios = <&gpio1 16 GPIO_ACTIVE_LOW &gpio1 15 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; + gpio-fan,speed-map = + < 0 3>, + <1500 2>, + <3250 1>, + <5000 0>; alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi index 88b70ba1c8..f80af24b9e 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi @@ -172,10 +172,11 @@ pinctrl-names = "default"; gpios = <&gpio0 19 GPIO_ACTIVE_LOW &gpio0 18 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; + gpio-fan,speed-map = + <0 3>, + <1500 2>, + <3250 1>, + <5000 0>; alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts index c0a087e774..044958bc55 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts @@ -29,15 +29,15 @@ &gpio1 1 GPIO_ACTIVE_LOW &gpio0 23 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = - < 0 0 - 1500 15 - 1700 14 - 1800 13 - 2100 12 - 3100 11 - 3300 10 - 4300 9 - 5500 8>; + < 0 0>, + <1500 15>, + <1700 14>, + <1800 13>, + <2100 12>, + <3100 11>, + <3300 10>, + <4300 9>, + <5500 8>; alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts index 5b9fa14b64..3fbe008f91 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts @@ -30,15 +30,15 @@ &gpio1 1 GPIO_ACTIVE_LOW &gpio0 23 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = - < 0 0 - 3000 15 - 3180 14 - 4140 13 - 4570 12 - 6760 11 - 7140 10 - 7980 9 - 9200 8>; + < 0 0>, + <3000 15>, + <3180 14>, + <4140 13>, + <4570 12>, + <6760 11>, + <7140 10>, + <7980 9>, + <9200 8>; alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi index 9b6666020c..20964eb48f 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi @@ -286,14 +286,15 @@ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH &gpio1 1 GPIO_ACTIVE_HIGH &gpio1 2 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2200 1 - 2500 2 - 3000 4 - 3300 3 - 3700 5 - 3800 6 - 4200 7 >; + gpio-fan,speed-map = + < 0 0>, + <2200 1>, + <2500 2>, + <3000 4>, + <3300 3>, + <3700 5>, + <3800 6>, + <4200 7>; }; gpio-fan-150-15-18 { @@ -306,14 +307,15 @@ &gpio0 16 GPIO_ACTIVE_HIGH &gpio0 17 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2200 1 - 2500 2 - 3000 4 - 3300 3 - 3700 5 - 3800 6 - 4200 7 >; + gpio-fan,speed-map = + < 0 0>, + <2200 1>, + <2500 2>, + <3000 4>, + <3300 3>, + <3700 5>, + <3800 6>, + <4200 7>; }; gpio-fan-100-32-35 { @@ -326,14 +328,15 @@ &gpio1 1 GPIO_ACTIVE_HIGH &gpio1 2 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; + gpio-fan,speed-map = + < 0 0>, + <2500 1>, + <3100 2>, + <3800 3>, + <4600 4>, + <4800 5>, + <4900 6>, + <5000 7>; }; gpio-fan-100-15-18 { @@ -346,14 +349,15 @@ &gpio0 16 GPIO_ACTIVE_HIGH &gpio0 17 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; + gpio-fan,speed-map = + < 0 0>, + <2500 1>, + <3100 2>, + <3800 3>, + <4600 4>, + <4800 5>, + <4900 6>, + <5000 7>; }; gpio-fan-100-15-35-1 { @@ -366,14 +370,15 @@ &gpio0 16 GPIO_ACTIVE_HIGH &gpio0 17 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; + gpio-fan,speed-map = + < 0 0>, + <2500 1>, + <3100 2>, + <3800 3>, + <4600 4>, + <4800 5>, + <4900 6>, + <5000 7>; }; gpio-fan-100-15-35-3 { @@ -388,14 +393,15 @@ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH &gpio1 12 GPIO_ACTIVE_HIGH &gpio1 13 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; + gpio-fan,speed-map = + < 0 0>, + <2500 1>, + <3100 2>, + <3800 3>, + <4600 4>, + <4800 5>, + <4900 6>, + <5000 7>; }; gpio-leds-alarm-12 { diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi index e172029a0c..a260c42dbd 100644 --- a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi +++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi @@ -50,10 +50,10 @@ pinctrl-names = "default"; gpio-fan,speed-map = - <0 3 - 1500 2 - 3250 1 - 5000 0>; + < 0 3>, + <1500 2>, + <3250 1>, + <5000 0>; }; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts index 83372c1f29..c6fbdd2901 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts @@ -249,6 +249,8 @@ ethernet-phy@0 { reg = <0x0>; + interrupt-parent = <&pioB>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -353,6 +355,7 @@ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts index 5cd593028a..f3cbb675ce 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts @@ -292,6 +292,8 @@ ethernet-phy@0 { reg = <0x0>; + interrupt-parent = <&pioB>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -465,6 +467,7 @@ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts index d0a6dbd377..f3ffb8f01d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts @@ -54,7 +54,6 @@ sdmmc0: sdio-host@a0000000 { bus-width = <8>; - mmc-ddr-3_3v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts index e055b9e2fe..15239834d8 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts @@ -197,7 +197,6 @@ &sdmmc0 { bus-width = <4>; - mmc-ddr-3_3v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts index 217e9b96c6..20b2497657 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts @@ -293,7 +293,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1150000>; + regulator-suspend-microvolt = <1150000>; regulator-mode = <4>; }; @@ -314,7 +314,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1050000>; + regulator-suspend-microvolt = <1050000>; regulator-mode = <4>; }; @@ -331,7 +331,7 @@ regulator-always-on; regulator-state-standby { - regulator-suspend-voltage = <1800000>; + regulator-suspend-microvolt = <1800000>; regulator-on-in-suspend; }; @@ -346,7 +346,7 @@ regulator-max-microvolt = <3700000>; regulator-state-standby { - regulator-suspend-voltage = <1800000>; + regulator-suspend-microvolt = <1800000>; regulator-on-in-suspend; }; diff --git a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi index 16b374e648..8c1d5c9fa4 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi @@ -446,7 +446,7 @@ tegra_ac97: ac97@70002000 { status = "okay"; nvidia,codec-reset-gpio = - <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>; + <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi index 4aeb74479f..1ac10965fd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi @@ -68,7 +68,7 @@ interrupt-parent = <&aitc>; ranges; - aipi@200000 { + bus@200000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -155,7 +155,7 @@ }; }; - aipi@210000 { + bus@210000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts index e93bf3b711..dd176fb54e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts @@ -122,6 +122,7 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; clocks = <&clks 129>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi index f65c7234f9..9cfff2151b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi @@ -68,6 +68,16 @@ }; }; + usbphy0: usb-phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + usbphy1: usb-phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -93,7 +103,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f80000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <3>; status = "disabled"; }; @@ -104,7 +114,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f84000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <10>; status = "disabled"; }; @@ -151,7 +161,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f98000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <4>; status = "disabled"; }; @@ -178,12 +188,9 @@ }; kpp: kpp@43fa8000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; clocks = <&clks 102>; - clock-names = ""; interrupts = <24>; status = "disabled"; }; @@ -597,7 +604,7 @@ #size-cells = <1>; }; - emi@80000000 { + bus@80000000 { compatible = "fsl,emi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -617,22 +624,4 @@ }; }; }; - - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usb-phy@0 { - reg = <0>; - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - usbphy1: usb-phy@1 { - reg = <1>; - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts index 35123b7cb6..21d436972a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts @@ -14,18 +14,12 @@ reg = <0xa0000000 0x08000000>; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + + usbphy0: usbphy { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts index 67b235044b..b8048e12e3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts @@ -48,15 +48,12 @@ regulator-always-on; }; - usbphy { - usbphy2: usbphy@2 { - compatible = "usb-nop-xceiv"; - reg = <2>; - vcc-supply = <®_5v0>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + usbphy2: usbphy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_5v0>; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi index 8d428c8446..e958d7286a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi @@ -29,19 +29,13 @@ regulator-max-microvolt = <5000000>; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - vcc-supply = <&sw3_reg>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + + usbphy0: usbphy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&sw3_reg>; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; @@ -49,12 +43,12 @@ status = "okay"; /* SSI0 <=> PINS_4 (MC13783 Audio) */ - ssi0 { + mux-ssi0 { fsl,audmux-port = <0>; fsl,port-config = <0xcb205000>; }; - pins4 { + mux-pins4 { fsl,audmux-port = <2>; fsl,port-config = <0x00001000>; }; @@ -186,7 +180,7 @@ reg = <0x52>; }; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi index cac4b3d689..ec472695c7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi @@ -81,7 +81,7 @@ interrupt-parent = <&aitc>; ranges; - aipi1: aipi@10000000 { /* AIPI1 */ + aipi1: bus@10000000 { /* AIPI1 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -453,7 +453,7 @@ }; }; - aipi2: aipi@10020000 { /* AIPI2 */ + aipi2: bus@10020000 { /* AIPI2 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts index 055d23a9ae..0814f5665a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts @@ -22,7 +22,7 @@ }; display-0 { - #address-cells =<1>; + #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts index 7d4ae113c3..63cdf24eb3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts @@ -22,7 +22,7 @@ compatible = "ilitek,ili251x"; reg = <0x41>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts index 9c5938e16d..2e75d700ef 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts @@ -22,7 +22,7 @@ compatible = "ilitek,ili251x"; reg = <0x41>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts index 01df7cffce..94625d5d59 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h60"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts index a015453daf..b3cfa8110a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h60"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts index b71ee6b792..7edc788bcb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h84"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; touchscreen-inverted-x; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts index 6f9d094dd6..18a620832a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts @@ -16,7 +16,7 @@ compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q"; panel0: lvds-panel0 { - compatible = "panel-lvds"; + compatible = "panel-lvds"; backlight = <&backlight_lvds>; width-mm = <152>; height-mm = <91>; @@ -43,7 +43,7 @@ }; panel1: lvds-panel1 { - compatible = "panel-lvds"; + compatible = "panel-lvds"; width-mm = <152>; height-mm = <91>; data-mapping = "jeida-18"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index dcb4f6a32f..ea40623d12 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -12,6 +12,13 @@ model = "Toradex Apalis iMX6Q/D Module"; compatible = "toradex,apalis_imx6q", "fsl,imx6q"; + aliases { + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC1 slot */ + mmc2 = &usdhc2; /* SD1 slot */ + /delete-property/ mmc3; + }; + /* Will be filled by the bootloader */ memory@10000000 { device_type = "memory"; @@ -166,7 +173,7 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 6cc4d6fd5f..d3a7a6eeb8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -12,6 +12,13 @@ model = "Toradex Colibri iMX6DL/S Module"; compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; + aliases { + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC/SD Slot */ + /delete-property/ mmc2; + /delete-property/ mmc3; + }; + backlight: backlight { compatible = "pwm-backlight"; brightness-levels = <0 45 63 88 119 158 203 255>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi index f1a41c7672..5587069b60 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi @@ -54,7 +54,7 @@ clk_codec: clock-codec { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <12000000>; + clock-frequency = <12000000>; }; sound { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi index da0f8dae1e..4d2abcd44e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi @@ -500,21 +500,21 @@ pinctrl_pwm1: pwm1grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050 >; }; pinctrl_pwm4: pwm4grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050 >; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi index b81799d707..596b3bb3dd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi @@ -25,7 +25,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_touch>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi index bda182edc5..81142c523f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi @@ -475,7 +475,7 @@ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index f6b35923ad..df3a375f0a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -418,7 +418,7 @@ <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; @@ -1010,7 +1010,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -1024,7 +1024,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -1038,7 +1038,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi index 3b87d980e9..a27a7554c2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi @@ -364,7 +364,7 @@ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi index 3fdece5bd3..5248a05823 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi @@ -805,6 +805,7 @@ &pinctrl_usb_pwr>; dr_mode = "host"; power-active-high; + over-current-active-low; disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi index fe42b0a468..3fc3130f9d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi @@ -128,11 +128,16 @@ }; }; - /* NXP SE97BTP with temperature sensor + eeprom */ + /* LM75A temperature sensor, TQMa7x 01xx */ + lm75a: temperature-sensor@48 { + compatible = "national,lm75a"; + reg = <0x48>; + }; + + /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */ se97b: temperature-sensor-eeprom@1e { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1e>; - status = "okay"; }; /* ST M24C64 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi index 3740e34ef9..9670f45eab 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi @@ -11,6 +11,10 @@ /* Required to properly pass MAC addresses from bootloader. */ ethernet0 = &fec1; ethernet1 = &fec2; + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC/SD slot */ + /delete-property/ mmc2; + /delete-property/ mmc3; }; memory@80000000 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts index dd8003bd1f..f0fda15f30 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts @@ -212,7 +212,7 @@ keep-power-in-suspend; wakeup-source; vmmc-supply = <®_wlreg_on>; - vqmmc-supply =<®_3p3v>; + vqmmc-supply = <®_3p3v>; status = "okay"; brcmf: wifi@1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi index c5eefe89cd..8d5037ac03 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi @@ -108,6 +108,14 @@ assigned-clock-rates = <0>, <32768>; }; +&cpu0 { + cpu-supply = <&sw1a_reg>; +}; + +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &ecspi3 { cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts index 85b97b5f64..7ed27c7ad7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts @@ -149,7 +149,7 @@ &i2c2 { pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_i2c2>; + pinctrl-0 = <&pinctrl_i2c2>; clock-frequency = <100000>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index ba7231b364..7bab113ca6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -210,6 +210,7 @@ remote-endpoint = <&mipi_from_sensor>; clock-lanes = <0>; data-lanes = <1>; + link-frequencies = /bits/ 64 <330000000>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index 4569d2b8ed..9c81c6baa2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -183,6 +183,15 @@ interrupt-parent = <&gpc>; ranges; + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks IMX7D_OCRAM_CLK>; + }; + funnel@30041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30041000 0x1000>; @@ -609,6 +618,7 @@ nvmem-cells = <&tempmon_calib>, <&fuse_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + #thermal-sensor-cells = <0>; }; }; @@ -724,6 +734,8 @@ clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, <&clks IMX7D_ECSPI4_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 6 7 1>, <&sdma 7 7 2>; status = "disabled"; }; @@ -854,6 +866,26 @@ }; }; }; + + mipi_dsi: dsi@30760000 { + compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30760000 0x400>; + clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>, + <&clks IMX7D_PLL_SYS_PFD5_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>; + assigned-clock-rates = <0>, <333000000>; + power-domains = <&pgc_mipi_phy>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + samsung,burst-clock-frequency = <891000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; + status = "disabled"; + }; }; aips3: bus@30800000 { @@ -879,6 +911,8 @@ clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, <&clks IMX7D_ECSPI1_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 0 7 1>, <&sdma 1 7 2>; status = "disabled"; }; @@ -891,6 +925,8 @@ clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, <&clks IMX7D_ECSPI2_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 2 7 1>, <&sdma 3 7 2>; status = "disabled"; }; @@ -903,6 +939,8 @@ clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, <&clks IMX7D_ECSPI3_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 4 7 1>, <&sdma 5 7 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi index 5a8b867d7d..e78d0a7d8c 100644 --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi @@ -467,7 +467,7 @@ pinctrl_pwm2: pwm2grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 >; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi index 9cf09c183b..6dd73290f0 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi @@ -74,7 +74,7 @@ sct_pwm: pwm@40000000 { compatible = "nxp,lpc1850-sct-pwm"; reg = <0x40000000 0x1000>; - clocks =<&ccu1 CLK_CPU_SCT>; + clocks = <&ccu1 CLK_CPU_SCT>; clock-names = "pwm"; resets = <&rgu 37>; #pwm-cells = <3>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi index 49c78c84cd..d471cc5efa 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi @@ -112,7 +112,7 @@ compatible = "fsl,ls1021a-msi"; reg = <0x0 0x1570e00 0x0 0x8>; msi-controller; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; }; msi2: msi-controller@1570e08 { diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi index 9cba1d0224..0309592af1 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi @@ -110,7 +110,7 @@ reg = <0x80018000 0x2000>; gpio0: gpio@0 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <0>; interrupts = <16>; gpio-controller; @@ -120,7 +120,7 @@ }; gpio1: gpio@1 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <1>; interrupts = <17>; gpio-controller; @@ -130,7 +130,7 @@ }; gpio2: gpio@2 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <2>; interrupts = <18>; gpio-controller; @@ -484,7 +484,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; + compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi index bb971e660d..69fcb0dde9 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi @@ -18,6 +18,7 @@ memory@40000000 { reg = <0x40000000 0x08000000>; + device_type = "memory"; }; reg_3v3: regulator-reg-3v3 { diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts index 153e401795..5485fe118d 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts @@ -260,6 +260,7 @@ sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; clocks = <&mclk>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi index 37b9d409a5..4817fba2d9 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi @@ -164,7 +164,7 @@ reg = <0x80018000 0x2000>; gpio0: gpio@0 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <0>; interrupts = <127>; gpio-controller; @@ -174,7 +174,7 @@ }; gpio1: gpio@1 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <1>; interrupts = <126>; gpio-controller; @@ -184,7 +184,7 @@ }; gpio2: gpio@2 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <2>; interrupts = <125>; gpio-controller; @@ -194,7 +194,7 @@ }; gpio3: gpio@3 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <3>; interrupts = <124>; gpio-controller; @@ -204,7 +204,7 @@ }; gpio4: gpio@4 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <4>; interrupts = <123>; gpio-controller; @@ -1100,7 +1100,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; + compatible = "fsl,imx28-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi index 14c411f146..5a19da9313 100644 --- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi @@ -55,7 +55,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_3v3>; - status = "okay"; + status = "okay"; }; &dcu0 { diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts index e4f691d601..722182f5fd 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts @@ -68,7 +68,7 @@ #address-cells = <1>; #size-cells = <0>; /* PTD12 ->RPIO[91] */ - sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; /* PTD10 ->RPIO[89] */ miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; num-chipselects = <0>; @@ -79,7 +79,7 @@ gpio-controller; #gpio-cells = <2>; /* PTB18 -> RGPIO[40] */ - load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; spi-max-frequency = <100000>; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 1a19aec895..7e72f860c3 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -162,7 +162,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6085"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -173,26 +173,26 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "eth_cu_1000_1"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_2"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -200,7 +200,7 @@ sfp = <&sff>; }; - port@6 { + ethernet-port@6 { reg = <6>; phy-mode = "rmii"; ethernet = <&fec1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index a248b8a453..029f49be40 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -294,11 +294,11 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW - &gpio1 8 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW + &gpio1 8 GPIO_ACTIVE_HIGH>; num-chipselects = <2>; flash@0 { diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index df1335492a..77492eeea4 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -47,17 +47,17 @@ #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -68,37 +68,37 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "aib2main_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "aib2main_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_5"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_6"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_7"; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "modem_pic"; @@ -108,7 +108,7 @@ }; }; - switch0port10: port@10 { + switch0port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -130,32 +130,32 @@ #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_100_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_100_3"; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "xgmii"; @@ -168,7 +168,7 @@ }; }; - switch1port10: port@10 { + switch1port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -188,17 +188,17 @@ #address-cells = <1>; #size-cells = <0>; - switch2: switch2@0 { + switch2: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 2>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_2"; phy-mode = "1000base-x"; @@ -206,7 +206,7 @@ sfp = <&sff1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_3"; phy-mode = "1000base-x"; @@ -214,7 +214,7 @@ sfp = <&sff2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_4"; phy-mode = "1000base-x"; @@ -222,7 +222,7 @@ sfp = <&sff3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_5"; phy-mode = "1000base-x"; @@ -230,7 +230,7 @@ sfp = <&sff4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_fc_1000_6"; phy-mode = "1000base-x"; @@ -238,7 +238,7 @@ sfp = <&sff5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "eth_fc_1000_7"; phy-mode = "1000base-x"; @@ -246,7 +246,7 @@ sfp = <&sff6>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -254,7 +254,7 @@ sfp = <&sff0>; }; - switch2port10: port@10 { + switch2port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "2500base-x"; @@ -276,17 +276,17 @@ #address-cells = <1>; #size-cells = <0>; - switch3: switch3@0 { + switch3: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 3>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_8"; phy-mode = "1000base-x"; @@ -294,7 +294,7 @@ sfp = <&sff7>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_9"; phy-mode = "1000base-x"; @@ -302,7 +302,7 @@ sfp = <&sff8>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_10"; phy-mode = "1000base-x"; @@ -310,7 +310,7 @@ sfp = <&sff9>; }; - switch3port9: port@9 { + switch3port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "2500base-x"; @@ -322,7 +322,7 @@ }; }; - switch3port10: port@10 { + switch3port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 1461804eca..2a49046466 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -123,7 +123,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -134,11 +134,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -149,32 +149,32 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 463c2452b9..078d8699e1 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -112,7 +112,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -123,11 +123,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -138,27 +138,27 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_100_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_5"; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "eth_cu_1000_1"; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_cu_1000_2"; phy-handle = <&phy9>; @@ -167,12 +167,12 @@ }; }; - mdio1 { + mdio-external { compatible = "marvell,mv88e6xxx-mdio-external"; #address-cells = <1>; #size-cells = <0>; - phy9: phy9@0 { + phy9: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; pinctrl-0 = <&pinctrl_gpio_phy9>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index f5ae0d5de3..22c8f44390 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -137,7 +137,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -148,11 +148,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -163,32 +163,32 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 3dfb1c8cef..9cc1e14e6c 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -23,12 +23,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk07.1-c2.dtb \ qcom-ipq8064-ap148.dtb \ qcom-ipq8064-rb3011.dtb \ + qcom-msm8226-microsoft-dempsey.dtb \ + qcom-msm8226-microsoft-makepeace.dtb \ + qcom-msm8226-microsoft-moneypenny.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-e5.dtb \ qcom-msm8916-samsung-e7.dtb \ qcom-msm8916-samsung-grandmax.dtb \ qcom-msm8916-samsung-serranove.dtb \ + qcom-msm8926-htc-memul.dtb \ + qcom-msm8926-microsoft-superman-lte.dtb \ + qcom-msm8926-microsoft-tesla.dtb \ + qcom-msm8926-motorola-peregrine.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8960-samsung-expressatt.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi new file mode 100644 index 0000000000..22f3c7bac5 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8018.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Device Tree Source for Qualcomm PM8018 + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + */ + +&ssbi { + pm8018: pmic { + compatible = "qcom,pm8018", "qcom,pm8921"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8018-pwrkey", + "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>, + <&pm8018 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8018_mpps: mpps@50 { + compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8018_mpps 0 0 6>; + }; + + rtc@11d { + compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + + pm8018_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8018_gpio 0 0 6>; + #gpio-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi new file mode 100644 index 0000000000..984b797779 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8058.dtsi @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8058: pmic { + compatible = "qcom,pm8058"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>, + <&pm8058 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8058_led48: led@48 { + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + status = "disabled"; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + + pm8058_mpps: mpps@50 { + compatible = "qcom,pm8058-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8058_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8058_led131: led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + status = "disabled"; + }; + + pm8058_led132: led@132 { + compatible = "qcom,pm8058-led"; + reg = <0x132>; + status = "disabled"; + }; + + pm8058_led133: led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + status = "disabled"; + }; + + pm8058_keypad: keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>, + <&pm8058 75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + pm8058_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8058_gpio 0 0 44>; + #gpio-cells = <2>; + }; + + pm8058_xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + ichg: adc-channel@3 { + reg = <0x00 0x03>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + ref_325mv: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + + rtc@1e8 { + compatible = "qcom,pm8058-rtc"; + reg = <0x1e8>; + interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ + <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi index 2413778f37..2fd4f135ed 100644 --- a/arch/arm/boot/dts/qcom/pm8226.dtsi +++ b/arch/arm/boot/dts/qcom/pm8226.dtsi @@ -82,6 +82,8 @@ "usb-valid", "dc-valid"; + status = "disabled"; + chg_otg: otg-vbus { }; }; diff --git a/arch/arm/boot/dts/qcom/pm8821.dtsi b/arch/arm/boot/dts/qcom/pm8821.dtsi new file mode 100644 index 0000000000..064e3ba54e --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8821.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This PMIC is used on a secondary SSBI bus */ +&ssbi2 { + pm8821: pmic { + compatible = "qcom,pm8821"; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pm8821_mpps: mpps@50 { + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8821_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi new file mode 100644 index 0000000000..058962af30 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8921.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8921: pmic { + compatible = "qcom,pm8921"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>, + <&pm8921 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8921_mpps: mpps@50 { + compatible = "qcom,pm8921-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8921_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + + pm8921_keypad: keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>, + <&pm8921 75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + status = "disabled"; + }; + + pm8921_gpio: gpio@150 { + + compatible = "qcom,pm8921-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; + #gpio-cells = <2>; + + }; + + pm8921_xoadc: xoadc@197 { + compatible = "qcom,pm8921-adc"; + reg = <0x197>; + interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + batt_therm: adc-channel@8 { + reg = <0x00 0x08>; + }; + + batt_id: adc-channel@9 { + reg = <0x00 0x09>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + chg_temp: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */ + <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */ + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi index ed0ba591c7..aca0052a02 100644 --- a/arch/arm/boot/dts/qcom/pm8941.dtsi +++ b/arch/arm/boot/dts/qcom/pm8941.dtsi @@ -99,6 +99,8 @@ usb-otg-in-supply = <&pm8941_5vs1>; + status = "disabled"; + chg_otg: otg-vbus { }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts index a39f5a161b..a2ca456012 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts @@ -253,6 +253,8 @@ qcom,fast-charge-high-threshold-voltage = <4400000>; qcom,auto-recharge-threshold-voltage = <4300000>; qcom,minimum-input-voltage = <4400000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts index 59b218042d..ac228965a4 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts @@ -335,6 +335,8 @@ qcom,fast-charge-current-limit = <300000>; qcom,fast-charge-safe-current = <600000>; qcom,auto-recharge-threshold-voltage = <4240000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts index feb78afef3..0a1fd5eb3c 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts @@ -292,6 +292,8 @@ qcom,fast-charge-high-threshold-voltage = <4350000>; qcom,auto-recharge-threshold-voltage = <4240000>; qcom,minimum-input-voltage = <4450000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts index 94351c9bf9..009afd8212 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts @@ -5,6 +5,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" / { model = "Qualcomm APQ8060 Dragonboard"; @@ -272,6 +273,10 @@ }; }; +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8058_gpio { dragon_ethernet_gpios: ethernet-state { pinconf { @@ -447,6 +452,8 @@ * that means */ regulators-0 { + compatible = "qcom,rpm-pm8901-regulators"; + vdd_l0-supply = <&pm8901_s4>; vdd_l1-supply = <&vph>; vdd_l2-supply = <&vph>; @@ -464,57 +471,63 @@ lvs3_in-supply = <&pm8058_s2>; mvs_in-supply = <&pm8058_s3>; - l0 { + pm8901_l0: l0 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l1 { + + pm8901_l1: l1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l2 { + + pm8901_l2: l2 { /* TMA340 requires strictly 3.3V */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l3 { + + pm8901_l3: l3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + + pm8901_l4: l4 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l5 { + + pm8901_l5: l5 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l6 { + + pm8901_l6: l6 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; bias-pull-down; }; /* s0 and s1 are SAW regulators controlled over SPM */ - s2 { + pm8901_s2: s2 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + pm8901_s3: s3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s4 { + pm8901_s4: s4 { regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; qcom,switch-mode-frequency = <1600000>; @@ -522,17 +535,22 @@ }; /* LVS0 thru 3 and mvs are just switches */ - lvs0 { + pm8901_lvs0: lvs0 { regulator-always-on; }; - lvs1 { }; - lvs2 { }; - lvs3 { }; - mvs { }; + pm8901_lvs1: lvs1 { }; + + pm8901_lvs2: lvs2 { }; + + pm8901_lvs3: lvs3 { }; + + pm8901_mvs: mvs { }; }; regulators-1 { + compatible = "qcom,rpm-pm8058-regulators"; + vdd_l0_l1_lvs-supply = <&pm8058_s3>; vdd_l2_l11_l12-supply = <&vph>; vdd_l3_l4_l5-supply = <&vph>; @@ -554,144 +572,169 @@ vdd_s4-supply = <&vph>; vdd_ncp-supply = <&vph>; - l0 { + pm8058_l0: l0 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l1 { + + pm8058_l1: l1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l2 { + + pm8058_l2: l2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l3 { + + pm8058_l3: l3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l4 { + + pm8058_l4: l4 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l5 { + + pm8058_l5: l5 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l6 { + + pm8058_l6: l6 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3600000>; bias-pull-down; }; - l7 { + + pm8058_l7: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l8 { + + pm8058_l8: l8 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <3050000>; bias-pull-down; }; - l9 { + + pm8058_l9: l9 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l10 { + + pm8058_l10: l10 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l11 { + + pm8058_l11: l11 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; bias-pull-down; }; - l12 { + + pm8058_l12: l12 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; bias-pull-down; }; - l13 { + + pm8058_l13: l13 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; bias-pull-down; }; - l14 { + + pm8058_l14: l14 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; - l15 { + + pm8058_l15: l15 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l16 { + + pm8058_l16: l16 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; regulator-always-on; }; - l17 { + + pm8058_l17: l17 { // 1.5V according to schematic regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l18 { + + pm8058_l18: l18 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; bias-pull-down; }; - l19 { + + pm8058_l19: l19 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; bias-pull-down; }; - l20 { + + pm8058_l20: l20 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l21 { + + pm8058_l21: l21 { // 1.1 V according to schematic regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; regulator-always-on; }; - l22 { + + pm8058_l22: l22 { // 1.2 V according to schematic regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; bias-pull-down; }; - l23 { + + pm8058_l23: l23 { // Unused regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l24 { + + pm8058_l24: l24 { // Unused regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l25 { + + pm8058_l25: l25 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - s0 { + pm8058_s0: s0 { // regulator-min-microvolt = <500000>; // regulator-max-microvolt = <1325000>; regulator-min-microvolt = <1100000>; @@ -699,7 +742,8 @@ qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s1 { + + pm8058_s1: s1 { // regulator-min-microvolt = <500000>; // regulator-max-microvolt = <1250000>; regulator-min-microvolt = <1100000>; @@ -707,21 +751,24 @@ qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s2 { + + pm8058_s2: s2 { // 1.3 V according to schematic regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + + pm8058_s3: s3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; regulator-always-on; bias-pull-down; }; - s4 { + + pm8058_s4: s4 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; qcom,switch-mode-frequency = <1600000>; @@ -730,14 +777,15 @@ }; /* LVS0 and LVS1 are just switches */ - lvs0 { + pm8058_lvs0: lvs0 { bias-pull-down; }; - lvs1 { + + pm8058_lvs1: lvs1 { bias-pull-down; }; - ncp { + pm8058_ncp: ncp { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; @@ -949,23 +997,27 @@ xoadc-ref-supply = <&pm8058_l18>; /* Board-specific channels */ - mpp5@5 { + adc-channel@5 { /* Connected to AOUT of ALS sensor */ reg = <0x00 0x05>; }; - mpp6@6 { + + adc-channel@6 { /* Connected to test point TP43 */ reg = <0x00 0x06>; }; - mpp7@7 { + + adc-channel@7 { /* Connected to battery thermistor */ reg = <0x00 0x07>; }; - mpp8@8 { + + adc-channel@8 { /* Connected to battery ID detector */ reg = <0x00 0x08>; }; - mpp9@9 { + + adc-channel@9 { /* Connected to XO thermistor */ reg = <0x00 0x09>; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts index c0dd6399f5..d460743fbb 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts @@ -1,8 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Asus Nexus7(flo)"; compatible = "asus,nexus7-flo", "qcom,apq8064"; @@ -180,24 +184,26 @@ status = "okay"; }; -/* eMMC */ -&sdcc1 { - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - status = "okay"; -}; - &mdp_dsi1_out { remote-endpoint = <&dsi0_in>; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs4_5_7-supply = <&pm8921_s4>; - vdd_l24-supply = <&pm8921_s1>; vdd_l25-supply = <&pm8921_s1>; vin_lvs2-supply = <&pm8921_s1>; @@ -209,7 +215,7 @@ vdd_ncp-supply = <&pm8921_l6>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -218,7 +224,7 @@ }; /* msm otg HSUSB_VDDCX */ - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <4800000>; @@ -231,55 +237,58 @@ * tabla2x-slim-CDC_VDD_CP * tabla2x-slim-VDDIO_CDC */ - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; regulator-always-on; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; /* mipi_dsi.1-dsi1_pll_vdda */ - l2 { + pm8921_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; /* msm_otg-HSUSB_3p3 */ - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; bias-pull-down; }; /* msm_otg-HSUSB_1p8 */ - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; /* msm_sdcc.1-sdc_vdd */ - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; regulator-always-on; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; }; + pm8921_l8: l8 { + }; + /* mipi_dsi.1-dsi1_avdd */ - l11 { + pm8921_l11: l11 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; @@ -287,14 +296,14 @@ }; /* pwm_power for backlight */ - l17 { + pm8921_l17: l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; }; /* camera, qdsp6 */ - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; @@ -304,37 +313,44 @@ * tabla2x-slim-CDC_VDDA_A_1P2V * tabla2x-slim-VDDD_CDC_D */ - l25 { + pm8921_l25: l25 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; bias-pull-down; }; - lvs1 { + pm8921_lvs1: lvs1 { bias-pull-down; }; - lvs4 { + pm8921_lvs4: lvs4 { bias-pull-down; }; - lvs5 { + pm8921_lvs5: lvs5 { bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; /* * mipi_dsi.1-dsi1_vddio * pil_riva-pll_vdd */ - lvs7 { + pm8921_lvs7: lvs7 { bias-pull-down; }; }; }; +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + &usb_hs1_phy { v3p3-supply = <&pm8921_l3>; v1p8-supply = <&pm8921_l4>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts index d6ecfd8add..671d58cc27 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts @@ -1,8 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "CompuLab CM-QS600"; compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; @@ -69,6 +72,14 @@ status = "okay"; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { wlan_default_gpios: wlan-gpios-state { pinconf { @@ -82,6 +93,8 @@ &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs2-supply = <&pm8921_s1>; vin_lvs4_5_7-supply = <&pm8921_s4>; @@ -93,9 +106,8 @@ vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; - /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -103,52 +115,51 @@ bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; - }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts index b0c5e7bd5e..ed86b24119 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts @@ -1,9 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Qualcomm APQ8064/IFC6410"; compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; @@ -170,6 +173,14 @@ perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { wlan_default_gpios: wlan-gpios-state { pinconf { @@ -192,6 +203,8 @@ &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs2-supply = <&pm8921_s1>; vin_lvs4_5_7-supply = <&pm8921_s4>; @@ -203,9 +216,8 @@ vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; - /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -213,59 +225,63 @@ bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - lvs1 { + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { bias-pull-down; }; - lvs6 { + pm8921_hdmi_switch: hdmi-switch { bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts index 9244512b74..2412aa3e3e 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -1,10 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Sony Xperia Z"; compatible = "sony,xperia-yuga", "qcom,apq8064"; @@ -65,6 +68,14 @@ status = "okay"; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio3", "gpio4", "gpio29", "gpio35"; @@ -82,11 +93,25 @@ &riva { pinctrl-names = "default"; pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + + vddcx-supply = <&pm8921_s3>; + vddmx-supply = <&pm8921_l24>; + vddpx-supply = <&pm8921_s4>; + status = "okay"; + + iris { + vddxo-supply = <&pm8921_l4>; + vddrfa-supply = <&pm8921_s2>; + vddpa-supply = <&pm8921_l10>; + vdddig-supply = <&pm8921_lvs2>; + }; }; &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_l1_l2_l12_l18-supply = <&pm8921_s4>; vin_lvs_1_3_6-supply = <&pm8921_s4>; vin_lvs_4_5_7-supply = <&pm8921_s4>; @@ -98,7 +123,7 @@ vin_l28-supply = <&pm8921_s7>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -106,21 +131,21 @@ bias-pull-down; }; - s2 { + pm8921_s2: s2 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <4800000>; bias-pull-down; }; - s4 { + pm8921_s4: s4 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -129,205 +154,207 @@ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - s8 { + pm8921_s8: s8 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; qcom,switch-mode-frequency = <1600000>; }; /* PMOS LDO */ - l1 { + pm8921_l1: l1 { regulator-always-on; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; bias-pull-down; }; - l2 { + pm8921_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l7 { + pm8921_l7: l7 { regulator-min-microvolt = <1850000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l8 { + pm8921_l8: l8 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; bias-pull-down; }; - l9 { + pm8921_l9: l9 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l10 { + pm8921_l10: l10 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; bias-pull-down; }; - l11 { + pm8921_l11: l11 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l12 { + pm8921_l12: l12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l14 { + pm8921_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l15 { + pm8921_l15: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l16 { + pm8921_l16: l16 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; bias-pull-down; }; - l17 { + pm8921_l17: l17 { regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; bias-pull-down; }; - l18 { + pm8921_l18: l18 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l21 { + pm8921_l21: l21 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; - l22 { + pm8921_l22: l22 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l24 { + pm8921_l24: l24 { regulator-min-microvolt = <750000>; regulator-max-microvolt = <1150000>; bias-pull-down; }; - l25 { + pm8921_l25: l25 { regulator-always-on; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; bias-pull-down; }; - l27 { + pm8921_l27: l27 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - l28 { + pm8921_l28: l28 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; - l29 { + pm8921_l29: l29 { regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; bias-pull-down; }; /* Low Voltage Switch */ - lvs1 { + pm8921_lvs1: lvs1 { bias-pull-down; }; - lvs2 { + pm8921_lvs2: lvs2 { bias-pull-down; }; - lvs3 { + pm8921_lvs3: lvs3 { bias-pull-down; }; - lvs4 { + pm8921_lvs4: lvs4 { bias-pull-down; }; - lvs5 { + pm8921_lvs5: lvs5 { bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; - lvs7 { + pm8921_lvs7: lvs7 { bias-pull-down; }; - usb-switch {}; + pm8921_usb_switch: usb-switch {}; - hdmi-switch {}; + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; - ncp { + pm8921_ncp: ncp { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 099a16c34e..3faf57035d 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -284,23 +284,6 @@ }; }; - - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&xoadc 0x00 0x01>, /* Battery */ - <&xoadc 0x00 0x02>, /* DC in (charger) */ - <&xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&xoadc 0x00 0x0b>, /* Die temperature */ - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x00 0x0e>; /* Charger temperature */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -655,133 +638,16 @@ clock-names = "core"; }; - ssbi@c00000 { + ssbi2: ssbi@c00000 { compatible = "qcom,ssbi"; reg = <0x00c00000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8821: pmic { - compatible = "qcom,pm8821"; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <76 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8821_mpps: mpps@50 { - compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; - reg = <0x50>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8821_mpps 0 0 4>; - }; - }; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pmicintc: pmic { - compatible = "qcom,pm8921"; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <74 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8921_gpio: gpio@150 { - - compatible = "qcom,pm8921-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8921_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8921_mpps: mpps@50 { - compatible = "qcom,pm8921-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8921_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; - interrupts = <39 1>; - reg = <0x11d>; - allow-set-time; - }; - - pwrkey@1c { - compatible = "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pmicintc>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - xoadc: xoadc@197 { - compatible = "qcom,pm8921-adc"; - reg = <0x197>; - interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - batt_therm: adc-channel@8 { - reg = <0x00 0x08>; - }; - batt_id: adc-channel@9 { - reg = <0x00 0x09>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - chg_temp: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - }; }; qfprom: qfprom@700000 { @@ -891,60 +757,6 @@ clocks = <&pxo_board>, <&cxo_board>; clock-names = "pxo", "cxo"; }; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - - pm8921_s1: s1 {}; - pm8921_s2: s2 {}; - pm8921_s3: s3 {}; - pm8921_s4: s4 {}; - pm8921_s7: s7 {}; - pm8921_s8: s8 {}; - - pm8921_l1: l1 {}; - pm8921_l2: l2 {}; - pm8921_l3: l3 {}; - pm8921_l4: l4 {}; - pm8921_l5: l5 {}; - pm8921_l6: l6 {}; - pm8921_l7: l7 {}; - pm8921_l8: l8 {}; - pm8921_l9: l9 {}; - pm8921_l10: l10 {}; - pm8921_l11: l11 {}; - pm8921_l12: l12 {}; - pm8921_l14: l14 {}; - pm8921_l15: l15 {}; - pm8921_l16: l16 {}; - pm8921_l17: l17 {}; - pm8921_l18: l18 {}; - pm8921_l21: l21 {}; - pm8921_l22: l22 {}; - pm8921_l23: l23 {}; - pm8921_l24: l24 {}; - pm8921_l25: l25 {}; - pm8921_l26: l26 {}; - pm8921_l27: l27 {}; - pm8921_l28: l28 {}; - pm8921_l29: l29 {}; - - pm8921_lvs1: lvs1 {}; - pm8921_lvs2: lvs2 {}; - pm8921_lvs3: lvs3 {}; - pm8921_lvs4: lvs4 {}; - pm8921_lvs5: lvs5 {}; - pm8921_lvs6: lvs6 {}; - pm8921_lvs7: lvs7 {}; - - pm8921_usb_switch: usb-switch {}; - - pm8921_hdmi_switch: hdmi-switch { - bias-pull-down; - }; - - pm8921_ncp: ncp {}; - }; }; usb1: usb@12500000 { @@ -1472,7 +1284,7 @@ qcom,ncb = <3>; }; - pcie: pci@1b500000 { + pcie: pcie@1b500000 { compatible = "qcom,pcie-apq8064"; reg = <0x1b500000 0x1000>, <0x1b502000 0x80>, @@ -1623,10 +1435,6 @@ memory-region = <&wcnss_mem>; - vddcx-supply = <&pm8921_s3>; - vddmx-supply = <&pm8921_l24>; - vddpx-supply = <&pm8921_s4>; - status = "disabled"; iris { @@ -1634,11 +1442,6 @@ clocks = <&cxo_board>; clock-names = "xo"; - - vddxo-supply = <&pm8921_l4>; - vddrfa-supply = <&pm8921_s2>; - vddpa-supply = <&pm8921_l10>; - vdddig-supply = <&pm8921_lvs2>; }; smd-edge { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts index 950fa652f9..6fce011236 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts @@ -49,6 +49,33 @@ no-map; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_uart2 { @@ -403,6 +430,10 @@ pinctrl-1 = <&sdc2_off>; }; +&smbb { + status = "okay"; +}; + &tlmm { sdc1_on: sdc1-on-state { clk-pins { diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi index 468ebc40d2..374af6dd36 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi @@ -98,7 +98,7 @@ }; }; - pci@40000000 { + pcie@40000000 { status = "okay"; perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index 9844e0b7cf..f989bd741c 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -224,7 +224,7 @@ }; sdhci: mmc@7824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -417,7 +417,7 @@ reg = <0x4ab000 0x4>; }; - pcie0: pci@40000000 { + pcie0: pcie@40000000 { compatible = "qcom,pcie-ipq4019"; reg = <0x40000000 0xf1d>, <0x40000f20 0xa8>, diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi index 6198f42f6a..6a7f4dd0f7 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi @@ -366,7 +366,7 @@ }; }; - qcom,ssbi@500000 { + ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; @@ -1076,7 +1076,7 @@ status = "disabled"; }; - pcie0: pci@1b500000 { + pcie0: pcie@1b500000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b500000 0x1000 0x1b502000 0x80 @@ -1127,7 +1127,7 @@ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; }; - pcie1: pci@1b700000 { + pcie1: pcie@1b700000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b700000 0x1000 0x1b702000 0x80 @@ -1178,7 +1178,7 @@ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; }; - pcie2: pci@1b900000 { + pcie2: pcie@1b900000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b900000 0x1000 0x1b902000 0x80 diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts index b269fdca14..e3b4b93c3d 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts @@ -6,11 +6,11 @@ * Author : Neil Armstrong <narmstrong@baylibre.com> */ +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "qcom-mdm9615-wp8548.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> / { model = "MangOH Green with WP8548 Module"; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi index dac3aa793f..0dd52cac0e 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi @@ -7,6 +7,7 @@ */ #include "qcom-mdm9615.dtsi" +#include "pm8018.dtsi" / { model = "Sierra Wireless WP8548 Module"; @@ -76,6 +77,10 @@ }; }; +&pm8018 { + interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; +}; + &pm8018_gpio { usb_vbus_5v_pins: usb-vbus-5v-state { pins = "gpio4"; @@ -129,6 +134,142 @@ pinctrl-names = "default"; }; +&rpm { + regulators { + compatible = "qcom,rpm-pm8018-regulators"; + + vin_lvs1-supply = <&pm8018_s3>; + + vdd_l7-supply = <&pm8018_s4>; + vdd_l8-supply = <&pm8018_s3>; + vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; + + /* Buck SMPS */ + pm8018_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s2: s2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s3: s3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s4: s4 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s5: s5 { + regulator-always-on; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8018_l2: l2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l3: l3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l4: l4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8018_l5: l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8018_l8: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8018_l9: l9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8018_l10: l10 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l11: l11 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l12: l12 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l13: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8018_l14: l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8018_lvs1: lvs1 { + bias-pull-down; + }; + }; +}; + &sdcc1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi index c0a60bae70..34c60994d0 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi @@ -256,57 +256,10 @@ }; }; - qcom,ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8018: pmic { - compatible = "qcom,pm8018", "qcom,pm8921"; - interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pwrkey@1c { - compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pm8018>; - interrupts = <50 IRQ_TYPE_EDGE_RISING>, - <51 IRQ_TYPE_EDGE_RISING>; - debounce = <15625>; - pull-up; - }; - - pm8018_mpps: mpps@50 { - compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8018_mpps 0 0 6>; - }; - - rtc@11d { - compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; - interrupt-parent = <&pm8018>; - interrupts = <39 IRQ_TYPE_EDGE_RISING>; - reg = <0x11d>; - allow-set-time; - }; - - pm8018_gpio: gpio@150 { - compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8018_gpio 0 0 6>; - #gpio-cells = <2>; - }; - }; }; sdcc1bam: dma-controller@12182000 { @@ -383,140 +336,6 @@ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8018-regulators"; - - vin_lvs1-supply = <&pm8018_s3>; - - vdd_l7-supply = <&pm8018_s4>; - vdd_l8-supply = <&pm8018_s3>; - vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; - - /* Buck SMPS */ - pm8018_s1: s1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s2: s2 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s3: s3 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s4: s4 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2200000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s5: s5 { - regulator-always-on; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - /* PMOS LDO */ - pm8018_l2: l2 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8018_l3: l3 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8018_l4: l4 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - pm8018_l5: l5 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - pm8018_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - pm8018_l7: l7 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - pm8018_l8: l8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - pm8018_l9: l9 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1150000>; - bias-pull-down; - }; - - pm8018_l10: l10 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l11: l11 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l12: l12 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l13: l13 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8018_l14: l14 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - /* Low Voltage Switch */ - pm8018_lvs1: lvs1 { - bias-pull-down; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi new file mode 100644 index 0000000000..525d8c608b --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common Board Device Tree for Microsoft MSM8x26-based Lumias + * + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" +#include <dt-bindings/input/input.h> + +/* + * Delete all generic (msm8226.dtsi) reserved + * memory mappings which are different on these devices. + */ +/delete-node/ &smem_region; + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* microSD */ + display0 = &framebuffer; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x3200000 0x800000>; + format = "a8r8g8b8"; + width = <720>; + height = <1280>; + stride = <(720 * 4)>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + /* + * This device being a WP platform has a different + * memory layout than other Android based devices. + * This smem memory region is directly copied from + * the original UEFI firmware. + */ + reserved-memory { + display_reserved: framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + /* These values were taken from the original firmware DSDT */ + pm8226_s1: s1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8226_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2075000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio106", "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + touchscreen_default: touchscreen-default-state { + irq-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts new file mode 100644 index 0000000000..2c664b5934 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Microsoft Lumia 640"; + compatible = "microsoft,dempsey", "qcom,msm8226"; + chassis-type = "handset"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts new file mode 100644 index 0000000000..731c5c3756 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Microsoft Lumia 640 XL"; + compatible = "microsoft,makepeace", "qcom,msm8226"; + chassis-type = "handset"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts new file mode 100644 index 0000000000..992b7115b5 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Nokia Lumia 630"; + compatible = "microsoft,moneypenny", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&framebuffer { + width = <480>; + height = <854>; + stride = <(480 * 4)>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 5cd03ea7b0..b492c95e5d 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -875,8 +875,8 @@ offset = <0x65c>; mode-bootloader = <0x77665500>; - mode-normal = <0x77665501>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-recovery = <0x77665502>; }; }; @@ -1006,6 +1006,46 @@ "ref"; }; }; + + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-305.18", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-19000000 { + opp-hz = /bits/ 64 <19000000>; + }; + }; + }; }; thermal-zones { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts index be18f1be29..69fe651f56 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts @@ -2,6 +2,7 @@ #include <dt-bindings/input/input.h> #include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" / { model = "Qualcomm MSM8660 SURF"; @@ -35,30 +36,42 @@ }; &pm8058 { - keypad@148 { - linux,keymap = < - MATRIX_KEY(0, 0, KEY_FN_F1) - MATRIX_KEY(0, 1, KEY_UP) - MATRIX_KEY(0, 2, KEY_LEFT) - MATRIX_KEY(0, 3, KEY_VOLUMEUP) - MATRIX_KEY(1, 0, KEY_FN_F2) - MATRIX_KEY(1, 1, KEY_RIGHT) - MATRIX_KEY(1, 2, KEY_DOWN) - MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) - MATRIX_KEY(2, 3, KEY_ENTER) - MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) - MATRIX_KEY(4, 1, KEY_UP) - MATRIX_KEY(4, 2, KEY_LEFT) - MATRIX_KEY(4, 3, KEY_HOME) - MATRIX_KEY(4, 4, KEY_FN_F3) - MATRIX_KEY(5, 0, KEY_CAMERA) - MATRIX_KEY(5, 1, KEY_RIGHT) - MATRIX_KEY(5, 2, KEY_DOWN) - MATRIX_KEY(5, 3, KEY_BACK) - MATRIX_KEY(5, 4, KEY_MENU) - >; - keypad,num-rows = <6>; - keypad,num-columns = <5>; + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8058_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_FN_F1) + MATRIX_KEY(0, 1, KEY_UP) + MATRIX_KEY(0, 2, KEY_LEFT) + MATRIX_KEY(0, 3, KEY_VOLUMEUP) + MATRIX_KEY(1, 0, KEY_FN_F2) + MATRIX_KEY(1, 1, KEY_RIGHT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) + MATRIX_KEY(2, 3, KEY_ENTER) + MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(4, 1, KEY_UP) + MATRIX_KEY(4, 2, KEY_LEFT) + MATRIX_KEY(4, 3, KEY_HOME) + MATRIX_KEY(4, 4, KEY_FN_F3) + MATRIX_KEY(5, 0, KEY_CAMERA) + MATRIX_KEY(5, 1, KEY_RIGHT) + MATRIX_KEY(5, 2, KEY_DOWN) + MATRIX_KEY(5, 3, KEY_BACK) + MATRIX_KEY(5, 4, KEY_MENU) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; +}; + +&rpm { + regulators-0 { + compatible = "qcom,rpm-pm8901-regulators"; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8058-regulators"; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 9217ced108..a7c245b9c8 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -73,22 +73,6 @@ }; }; - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ - <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ - <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ - <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -334,143 +318,10 @@ status = "disabled"; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8058: pmic { - compatible = "qcom,pm8058"; - interrupt-parent = <&tlmm>; - interrupts = <88 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8058_gpio: gpio@150 { - compatible = "qcom,pm8058-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8058_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8058_mpps: mpps@50 { - compatible = "qcom,pm8058-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8058_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pwrkey@1c { - compatible = "qcom,pm8058-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pm8058>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - pm8058_keypad: keypad@148 { - compatible = "qcom,pm8058-keypad"; - reg = <0x148>; - interrupt-parent = <&pm8058>; - interrupts = <74 1>, <75 1>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; - - pm8058_xoadc: xoadc@197 { - compatible = "qcom,pm8058-adc"; - reg = <0x197>; - interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - ichg: adc-channel@3 { - reg = <0x00 0x03>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - ref_325mv: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - - rtc@1e8 { - compatible = "qcom,pm8058-rtc"; - reg = <0x1e8>; - interrupt-parent = <&pm8058>; - interrupts = <39 1>; - allow-set-time; - }; - - vibrator@4a { - compatible = "qcom,pm8058-vib"; - reg = <0x4a>; - }; - - pm8058_led48: led@48 { - compatible = "qcom,pm8058-keypad-led"; - reg = <0x48>; - status = "disabled"; - }; - - pm8058_led131: led@131 { - compatible = "qcom,pm8058-led"; - reg = <0x131>; - status = "disabled"; - }; - - pm8058_led132: led@132 { - compatible = "qcom,pm8058-led"; - reg = <0x132>; - status = "disabled"; - }; - - pm8058_led133: led@133 { - compatible = "qcom,pm8058-led"; - reg = <0x133>; - status = "disabled"; - }; - - }; }; l2cc: clock-controller@2082000 { @@ -496,72 +347,6 @@ clocks = <&pxo_board>; clock-names = "pxo"; }; - - regulators-0 { - compatible = "qcom,rpm-pm8901-regulators"; - - pm8901_l0: l0 {}; - pm8901_l1: l1 {}; - pm8901_l2: l2 {}; - pm8901_l3: l3 {}; - pm8901_l4: l4 {}; - pm8901_l5: l5 {}; - pm8901_l6: l6 {}; - - /* S0 and S1 Handled as SAW regulators by SPM */ - pm8901_s2: s2 {}; - pm8901_s3: s3 {}; - pm8901_s4: s4 {}; - - pm8901_lvs0: lvs0 {}; - pm8901_lvs1: lvs1 {}; - pm8901_lvs2: lvs2 {}; - pm8901_lvs3: lvs3 {}; - - pm8901_mvs: mvs {}; - }; - - regulators-1 { - compatible = "qcom,rpm-pm8058-regulators"; - - pm8058_l0: l0 {}; - pm8058_l1: l1 {}; - pm8058_l2: l2 {}; - pm8058_l3: l3 {}; - pm8058_l4: l4 {}; - pm8058_l5: l5 {}; - pm8058_l6: l6 {}; - pm8058_l7: l7 {}; - pm8058_l8: l8 {}; - pm8058_l9: l9 {}; - pm8058_l10: l10 {}; - pm8058_l11: l11 {}; - pm8058_l12: l12 {}; - pm8058_l13: l13 {}; - pm8058_l14: l14 {}; - pm8058_l15: l15 {}; - pm8058_l16: l16 {}; - pm8058_l17: l17 {}; - pm8058_l18: l18 {}; - pm8058_l19: l19 {}; - pm8058_l20: l20 {}; - pm8058_l21: l21 {}; - pm8058_l22: l22 {}; - pm8058_l23: l23 {}; - pm8058_l24: l24 {}; - pm8058_l25: l25 {}; - - pm8058_s0: s0 {}; - pm8058_s1: s1 {}; - pm8058_s2: s2 {}; - pm8058_s3: s3 {}; - pm8058_s4: s4 {}; - - pm8058_lvs0: lvs0 {}; - pm8058_lvs1: lvs1 {}; - - pm8058_ncp: ncp {}; - }; }; amba { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts new file mode 100644 index 0000000000..ed328b2433 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "HTC One Mini 2"; + compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + unknown@5b00000 { + reg = <0x05b00000 0x200000>; + no-map; + }; + + unknown@7500000 { + reg = <0x07500000 0xb00000>; + no-map; + }; + + mpss_region: mpss@8000000 { + reg = <0x08000000 0x4f00000>; + no-map; + }; + + unknown@cf00000 { + reg = <0x0cf00000 0x200000>; + no-map; + }; + + mba_region: mba@d100000 { + reg = <0x0d100000 0x3a000>; + no-map; + }; + + unknown@d13a000 { + reg = <0x0d13a000 0xc6000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0x650000>; + no-map; + }; + + unknown@d850000 { + reg = <0x0d850000 0x3b0000>; + no-map; + }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1400000>; + no-map; + }; + + unknown@f000000 { + reg = <0x0f000000 0x500000>; + no-map; + }; + + venus_region: venus@f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + unknown@fb00000 { + reg = <0x0fb00000 0x1b00000>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/msm8926/memul/adsp.mbn"; + status = "okay"; +}; + +&blsp1_i2c2 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8226_l19>; + vid-supply = <&pm8226_l28>; + }; + + accelerometer@18 { + compatible = "bosch,bma250e"; + reg = <0x18>; + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_l28>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + /* TFA9887 @ 34 */ + /* TFA9887 @ 35 */ +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + /* NCP6924 Camera Regulators @ 10 */ + /* PN544 NFC @ 28 */ + /* TPS61310 Flash/Torch @ 33 */ +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1750000>; + qcom,fast-charge-current-limit = <1750000>; + qcom,fast-charge-safe-voltage = <4360000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts new file mode 100644 index 0000000000..9b48661d69 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/* This device has touchscreen on i2c3 instead */ +/delete-node/ &touchscreen; + +/ { + model = "Nokia Lumia 735"; + compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&blsp1_i2c3 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts new file mode 100644 index 0000000000..53a6d4e859 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/* This device has touchscreen on i2c1 instead */ +/delete-node/ &touchscreen; + +/ { + model = "Nokia Lumia 830"; + compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&blsp1_i2c1 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5 { + status = "disabled"; +}; + +&gpio_keys { + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + }; + + key-camera-focus { + label = "Camera Focus"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts new file mode 100644 index 0000000000..0cbe2d2fbb --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Motorola Moto G 4G (2013)"; + compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + pm8226_lvs1: lvs1 { + /* Pull-up for I2C lines */ + regulator-always-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <2000000>; + qcom,fast-charge-current-limit = <1900000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts index 6c1bc38188..36f4c997b0 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts @@ -2,6 +2,7 @@ #include <dt-bindings/input/input.h> #include "qcom-msm8960.dtsi" +#include "pm8921.dtsi" / { model = "Qualcomm MSM8960 CDP"; @@ -88,17 +89,21 @@ }; }; -&pmicintc { - keypad@148 { - linux,keymap = < - MATRIX_KEY(0, 0, KEY_VOLUMEUP) - MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) - MATRIX_KEY(0, 3, KEY_CAMERA) - >; - keypad,num-rows = <1>; - keypad,num-columns = <5>; - }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + + status = "okay"; }; &rpm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts index 13e85c2874..1a5116336f 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/input/input.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> #include "qcom-msm8960.dtsi" -#include <dt-bindings/reset/qcom,gcc-msm8960.h> +#include "pm8921.dtsi" / { model = "Samsung Galaxy Express SGH-I437"; @@ -84,6 +85,10 @@ }; }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + &rpm { regulators { compatible = "qcom,rpm-pm8921-regulators"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index d13080fcbe..f420740e06 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -200,10 +200,6 @@ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - }; }; acc0: clock-controller@2088000 { @@ -259,49 +255,10 @@ }; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pmicintc: pmic { - compatible = "qcom,pm8921"; - interrupt-parent = <&msmgpio>; - interrupts = <104 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pwrkey@1c { - compatible = "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pmicintc>; - interrupts = <50 IRQ_TYPE_EDGE_RISING>, - <51 IRQ_TYPE_EDGE_RISING>; - debounce = <15625>; - pull-up; - }; - - keypad@148 { - compatible = "qcom,pm8921-keypad"; - reg = <0x148>; - interrupt-parent = <&pmicintc>; - interrupts = <74 IRQ_TYPE_EDGE_RISING>, - <75 IRQ_TYPE_EDGE_RISING>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; - interrupts = <39 IRQ_TYPE_EDGE_RISING>; - reg = <0x11d>; - allow-set-time; - }; - }; }; rng@1a500000 { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts index da99f770d4..4aaae8537a 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -60,6 +60,33 @@ enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; }; + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -340,6 +367,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -347,6 +375,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi index 23ae474698..d34659ebac 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi @@ -65,6 +65,33 @@ pmsg-size = <0x80000>; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -190,6 +217,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -197,6 +225,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { @@ -425,6 +454,8 @@ qcom,fast-charge-low-threshold-voltage = <3400000>; qcom,auto-recharge-threshold-voltage = <4200000>; qcom,minimum-input-voltage = <4300000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index f41cc4b4b5..083ab780ab 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -346,6 +346,20 @@ reg = <0xf9011000 0x1000>; }; + saw_l2: power-controller@f9012000 { + compatible = "qcom,saw2"; + reg = <0xf9012000 0x1000>; + regulator; + }; + + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -405,52 +419,46 @@ }; }; - saw0: power-controller@f9089000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; - }; - - saw1: power-controller@f9099000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; - }; - - saw2: power-controller@f90a9000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; - }; - - saw3: power-controller@f90b9000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; - }; - - saw_l2: power-controller@f9012000 { - compatible = "qcom,saw2"; - reg = <0xf9012000 0x1000>; - regulator; - }; - acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; + saw0: power-controller@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; + saw1: power-controller@f9099000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; + saw2: power-controller@f90a9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; + saw3: power-controller@f90b9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; @@ -1063,6 +1071,15 @@ }; }; + bimc: interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8974"; #clock-cells = <1>; @@ -1101,22 +1118,13 @@ }; }; - bimc: interconnect@fc380000 { - reg = <0xfc380000 0x6a000>; - compatible = "qcom,msm8974-bimc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - snoc: interconnect@fc460000 { reg = <0xfc460000 0x4000>; compatible = "qcom,msm8974-snoc"; #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; + <&rpmcc RPM_SMD_SNOC_A_CLK>; }; pnoc: interconnect@fc468000 { @@ -1125,7 +1133,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_PNOC_CLK>, - <&rpmcc RPM_SMD_PNOC_A_CLK>; + <&rpmcc RPM_SMD_PNOC_A_CLK>; }; ocmemnoc: interconnect@fc470000 { @@ -1134,7 +1142,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; + <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; }; mmssnoc: interconnect@fc478000 { @@ -1143,7 +1151,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&mmcc MMSS_S0_AXI_CLK>, - <&mmcc MMSS_S0_AXI_CLK>; + <&mmcc MMSS_S0_AXI_CLK>; }; cnoc: interconnect@fc480000 { @@ -1152,7 +1160,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_CNOC_CLK>, - <&rpmcc RPM_SMD_CNOC_A_CLK>; + <&rpmcc RPM_SMD_CNOC_A_CLK>; }; tsens: thermal-sensor@fc4a9000 { @@ -1633,13 +1641,6 @@ bias-pull-up; drive-strength = <2>; }; - - cd-pins { - pins = "gpio54"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; }; blsp1_uart2_default: blsp1-uart2-default-state { @@ -2408,31 +2409,4 @@ <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; - - vreg_boost: vreg-boost { - compatible = "regulator-fixed"; - - regulator-name = "vreg-boost"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - regulator-always-on; - regulator-boot-on; - - gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&boost_bypass_n_pin>; - }; - - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - regulator-always-on; - }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts index 6c4153689b..fe227fd3f9 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts @@ -57,6 +57,33 @@ enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; vcc-supply = <&pm8941_l18>; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -381,6 +408,8 @@ qcom,fast-charge-high-threshold-voltage = <4350000>; qcom,auto-recharge-threshold-voltage = <4240000>; qcom,minimum-input-voltage = <4450000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts index c0ca264d81..4c8edadea0 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts @@ -51,6 +51,33 @@ debounce-interval = <150>; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c1 { @@ -433,6 +460,10 @@ status = "okay"; }; +&smbb { + status = "okay"; +}; + &tlmm { gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio68"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts index 325feb89b3..b93539e2b8 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts @@ -155,7 +155,15 @@ enable-active-high; }; - /delete-node/ vreg-boost; + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -355,7 +363,6 @@ vddr-supply = <&vreg_panel>; reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 0798cce3db..ee94741a26 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -84,6 +84,33 @@ pinctrl-0 = <&lcd_dcdc_en_pin_a>; }; + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -297,6 +324,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -304,6 +332,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { @@ -558,6 +587,8 @@ qcom,fast-charge-low-threshold-voltage = <3400000>; qcom,auto-recharge-threshold-voltage = <4200000>; qcom,minimum-input-voltage = <4300000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index fb6764b2dc..27429d0fed 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -228,31 +228,26 @@ usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx55-qmp-usb3-uni-phy"; - reg = <0x00ff6000 0x1c0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00ff6000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - resets = <&gcc GCC_USB3PHY_PHY_BCR>, - <&gcc GCC_USB3_PHY_BCR>; - reset-names = "phy", "common"; - - usb_ssphy: phy@ff6200 { - reg = <0x00ff6200 0x170>, - <0x00ff6400 0x200>, - <0x00ff6800 0x800>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + status = "disabled"; }; mc_virt: interconnect@1100000 { @@ -603,7 +598,7 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_hsphy>, <&usb_ssphy>; + phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi index 27b7f50a18..40591a4da6 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi @@ -204,8 +204,16 @@ gcc: clock-controller@100000 { compatible = "qcom,gcc-sdx65"; reg = <0x00100000 0x001f7400>; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie_phy>, + <0>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_pipe_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; @@ -233,32 +241,27 @@ usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx65-qmp-usb3-uni-phy"; - reg = <0x00ff6000 0x1c8>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00ff6000 0x2000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_EN>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_EN>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_BCR>, - <&gcc GCC_USB3_PHY_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; status = "disabled"; - usb_ssphy: phy@ff6200 { - reg = <0x00ff6e00 0x160>, - <0x00ff7000 0x1ec>, - <0x00ff6200 0x1e00>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; }; system_noc: interconnect@1620000 { @@ -520,7 +523,7 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_hsphy>, <&usb_ssphy>; + phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi index e10f99278c..de52218cea 100644 --- a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi @@ -27,6 +27,15 @@ }; }; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; }; &can1 { @@ -69,6 +78,12 @@ clocks = <&cec_clock>; clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts index d21e00e1f4..e1ac2c161e 100644 --- a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts @@ -132,7 +132,7 @@ i2c-gpio,delay-us = <5>; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; brightness-levels = <0 1 2 4 8 16 32 64 128 255>; @@ -143,6 +143,18 @@ enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>; }; + panel { + compatible = "ampire,am-800480l1tmqw-t00h"; + backlight = <&backlight>; + power-supply = <®_5p0v>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdc0_rgb>; + }; + }; + }; + sound { compatible = "simple-audio-card"; @@ -228,10 +240,22 @@ }; }; -&pfc { +&lcdc0 { pinctrl-0 = <&lcd0_pins>; pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pfc { ether_pins: ether { groups = "gether_mii", "gether_int"; function = "gether"; diff --git a/arch/arm/boot/dts/renesas/r8a7740.dtsi b/arch/arm/boot/dts/renesas/r8a7740.dtsi index 1b2cf5fa32..55884ec701 100644 --- a/arch/arm/boot/dts/renesas/r8a7740.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7740.dtsi @@ -398,6 +398,61 @@ status = "disabled"; }; + lcdc0: lcd-controller@fe940000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe940000 0x4000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC0>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc0_rgb: endpoint { + }; + }; + }; + }; + + lcdc1: lcd-controller@fe944000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe944000 0x4000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC1>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc1_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + + lcdc1_hdmi: endpoint { + }; + }; + }; + }; + tmu0: timer@fff80000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff80000 0x2c>; @@ -474,6 +529,16 @@ #clock-cells = <0>; clock-frequency = <0>; }; + lcdlclk0_clk: lcdlclk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + lcdlclk1_clk: lcdlclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts index b1f679da36..a0b5743980 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -34,6 +34,15 @@ }; }; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; }; &du { @@ -81,6 +90,12 @@ clock-names = "cec"; pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts index c105932f64..24411044ef 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts @@ -182,7 +182,7 @@ VDDIO-supply = <®_3p3v>; }; - stmpe811@44 { + port-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; interrupt-parent = <&gpio4>; @@ -197,7 +197,7 @@ /* internal ADC reference */ st,ref-sel = <0>; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; diff --git a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts index 08ea149b1e..9b13e8d153 100644 --- a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts @@ -52,10 +52,10 @@ states = <3300000 1>, <1800000 0>; }; - keyboard-irq { + keypad-0 { compatible = "gpio-keys"; - pinctrl-0 = <&keyboard_irq_pins>; + pinctrl-0 = <&keypad0_pins>; pinctrl-names = "default"; interrupt-parent = <&gpio0>; @@ -76,11 +76,11 @@ }; }; - keyboard-gpio { + keypad-1 { compatible = "gpio-keys-polled"; poll-interval = <50>; - pinctrl-0 = <&keyboard_gpio_pins>; + pinctrl-0 = <&keypad1_pins>; pinctrl-names = "default"; key-3 { @@ -193,7 +193,7 @@ }; &gpio0 { - keyboard-irq-hog { + keypad0-hog { gpio-hog; gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>; input; @@ -215,6 +215,35 @@ }; &lbsc { + flash@0 { + compatible = "cfi-flash"; + reg = <0x0 0x04000000>; + pinctrl-0 = <&flash_pins>; + pinctrl-names = "default"; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "flash"; + reg = <0x00080000 0x03f80000>; + }; + }; + }; + ethernet@18000000 { compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; @@ -266,6 +295,11 @@ }; }; + flash_pins: flash { + groups = "lbsc_cs0"; + function = "lbsc"; + }; + scif2_pins: scif2 { groups = "scif2_data_c"; function = "scif2"; @@ -286,11 +320,11 @@ function = "hspi0"; }; - keyboard_irq_pins: keyboard-irq { + keypad0_pins: keypad-0 { pins = "GP_0_17", "GP_0_18"; bias-pull-up; }; - keyboard_gpio_pins: keyboard-gpio { + keypad1_pins: keypad-1 { pins = "GP_0_19", "GP_0_20"; bias-pull-up; }; diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts index b17a9f9307..8590981245 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts @@ -122,6 +122,15 @@ }; }; + fixedregulator1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -303,7 +312,7 @@ * * IIC0/I2C0 does not appear to support fallback to GPIO. */ - i2cexio0: i2c-10 { + i2cexio0: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic0>, <&i2c0>; i2c-bus-name = "i2c-exio0"; @@ -316,7 +325,7 @@ * This is similar to the arangement described for i2cexio0 (above) * with a fallback to GPIO also provided. */ - i2cexio1: i2c-11 { + i2cexio1: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-exio1"; @@ -328,7 +337,7 @@ * IIC2 and I2C2 may be switched using pinmux. * A fallback to GPIO is also provided. */ - i2chdmi: i2c-12 { + i2chdmi: i2c-mux3 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -361,6 +370,12 @@ clocks = <&cec_clock>; clock-names = "cec"; + avdd-supply = <&fixedregulator1v8>; + dvdd-supply = <&fixedregulator1v8>; + pvdd-supply = <&fixedregulator1v8>; + dvdd-3v-supply = <&fixedregulator3v3>; + bgvdd-supply = <&fixedregulator1v8>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -417,7 +432,7 @@ * IIC3 and I2C3 may be switched using pinmux. * IIC3/I2C3 does not appear to support fallback to GPIO. */ - i2cpwr: i2c-13 { + i2cpwr: i2c-mux4 { compatible = "i2c-demux-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins>; diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts index 25956661a8..683f7395fa 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts @@ -44,6 +44,15 @@ }; }; + fixedregulator1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -296,6 +305,12 @@ clocks = <&osc4_clk>; clock-names = "cec"; + avdd-supply = <&fixedregulator1v8>; + dvdd-supply = <&fixedregulator1v8>; + pvdd-supply = <&fixedregulator1v8>; + dvdd-3v-supply = <&fixedregulator3v3>; + bgvdd-supply = <&fixedregulator1v8>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts index ec01cc8595..0efd9f98c7 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts @@ -174,6 +174,24 @@ }; }; + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -340,7 +358,7 @@ * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA). * A fallback to GPIO is provided. */ - i2cexio1: i2c-12 { + i2cexio1: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-exio1"; @@ -351,7 +369,7 @@ /* * A fallback to GPIO is provided for I2C2. */ - i2chdmi: i2c-13 { + i2chdmi: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -384,6 +402,12 @@ clocks = <&cec_clock>; clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -446,7 +470,7 @@ * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). * A fallback to GPIO is provided. */ - i2cexio4: i2c-14 { + i2cexio4: i2c-mux3 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c4>, <&gpioi2c4>; i2c-bus-name = "i2c-exio4"; diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts index fcc9a2313e..93c86e9216 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts @@ -47,6 +47,24 @@ reg = <2 0x00000000 0 0x40000000>; }; + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -148,7 +166,7 @@ /* * A fallback to GPIO is provided for I2C2. */ - i2chdmi: i2c-10 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -179,6 +197,12 @@ interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts index af16f25184..540a9ad28f 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts @@ -30,6 +30,15 @@ reg = <0 0x40000000 0 0x40000000>; }; + d1_8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3_3v: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "D3.3V"; @@ -182,6 +191,35 @@ }; &lbsc { + flash@0 { + compatible = "cfi-flash"; + reg = <0x00000000 0x04000000>; + pinctrl-0 = <&flash_pins>; + pinctrl-names = "default"; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "flash"; + reg = <0x00080000 0x03f80000>; + }; + }; + }; + ethernet@18000000 { compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; @@ -240,6 +278,11 @@ function = "du1"; }; + flash_pins: flash { + groups = "lbsc_cs0"; + function = "lbsc"; + }; + keyboard_pins: keyboard { pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2"; bias-pull-up; @@ -296,6 +339,12 @@ interrupt-parent = <&irqc>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + bgvdd-supply = <&d1_8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts index f87e78fe3f..000f21a2a8 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts @@ -29,6 +29,15 @@ reg = <0 0x40000000 0 0x40000000>; }; + d1_8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3_3v: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "D3.3V"; @@ -254,6 +263,12 @@ reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; reg-names = "main", "edid", "cec", "packet"; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + bgvdd-supply = <&d1_8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -283,6 +298,12 @@ reg = <0x39>, <0x49>, <0x29>, <0x59>; reg-names = "main", "edid", "cec", "packet"; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + bgvdd-supply = <&d1_8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts index 9358fc7d0e..1ea6c75789 100644 --- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -165,6 +165,24 @@ }; }; + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -324,7 +342,7 @@ /* * A fallback to GPIO is provided for I2C2. */ - i2chdmi: i2c-11 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -368,6 +386,12 @@ interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -430,7 +454,7 @@ * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). * A fallback to GPIO is provided. */ - i2cexio4: i2c-12 { + i2cexio4: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c4>, <&gpioi2c4>; i2c-bus-name = "i2c-exio4"; diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts index 73ec4d3541..b5ecafbb2e 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts @@ -192,7 +192,7 @@ /* * A fallback to GPIO is provided for I2C1. */ - i2chdmi: i2c-11 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-hdmi"; @@ -222,7 +222,7 @@ * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA). * A fallback to GPIO is provided. */ - i2cexio4: i2c-14 { + i2cexio4: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c4>, <&gpioi2c4>; i2c-bus-name = "i2c-exio4"; diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts index b825f2e25d..595e074085 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts @@ -102,6 +102,15 @@ }; }; + d1_8v: regulator-d1-8v { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3_3v: regulator-d3-3v { compatible = "regulator-fixed"; regulator-name = "D3.3V"; @@ -225,7 +234,7 @@ /* * A fallback to GPIO is provided for I2C1. */ - i2chdmi: i2c-10 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-hdmi"; @@ -256,6 +265,12 @@ interrupt-parent = <&gpio5>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + bgvdd-supply = <&d1_8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi index 0fa565a1c3..fa63e1afc4 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi @@ -437,7 +437,7 @@ }; can0: can@52104000 { - compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000"; + compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000"; reg = <0x52104000 0x800>; reg-io-width = <4>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index 0f46e18fe2..ab4cd9aab7 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -2,7 +2,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rv1108-elgin-r1.dtb \ rv1108-evb.dtb \ + rv1109-sonoff-ihost.dtb \ rv1126-edgeble-neu2-io.dtb \ + rv1126-sonoff-ihost.dtb \ rk3036-evb.dtb \ rk3036-kylin.dtb \ rk3066a-bqcurie2.dtb \ @@ -10,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-mk808.dtb \ rk3066a-rayeager.dtb \ rk3128-evb.dtb \ + rk3128-xpi-3128.dtb \ rk3188-bqedison2qc.dtb \ rk3188-px3-evb.dtb \ rk3188-radxarock.dtb \ diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts index 67e1e04139..e32c73d32f 100644 --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts @@ -8,11 +8,26 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + chosen { + stdout-path = "serial2:115200n8"; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x20000000>; }; + hdmi_con: hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds: gpio-leds { compatible = "gpio-leds"; @@ -110,6 +125,12 @@ status = "okay"; }; +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi index c420c7c642..04af224005 100644 --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi @@ -17,6 +17,9 @@ interrupt-parent = <&gic>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -282,7 +285,6 @@ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - rockchip,default-sample-phase = <158>; disable-wp; dmas = <&pdma 12>; dma-names = "rx-tx"; diff --git a/arch/arm/boot/dts/rockchip/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi index de9915d946..30139f21de 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi @@ -13,6 +13,11 @@ / { compatible = "rockchip,rk3066a"; + aliases { + gpio4 = &gpio4; + gpio6 = &gpio6; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts index c38f42497c..c7ab7fcdb4 100644 --- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts +++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts @@ -12,11 +12,6 @@ compatible = "rockchip,rk3128-evb", "rockchip,rk3128"; aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - i2c1 = &i2c1; mmc0 = &emmc; }; diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts new file mode 100644 index 0000000000..03a9788151 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "rk3128.dtsi" + +/ { + model = "Geniatech XPI-3128"; + compatible = "geniatech,xpi-3128", "rockchip,rk3128"; + + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + mmc1 = &sdmmc; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + chosen { + stdout-path = &uart1; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <3300000>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + + dc_5v: dc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* + * This is a vbus-supply, which also supplies the GL852G usb hub, + * thus has to be always-on + */ + host_pwr_5v: host-pwr-5v-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1500>; + regulator-name = "HOST_PWR_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&host_drv>; + enable-active-high; + regulator-always-on; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + default-state = "on"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led>; + }; + + led-spd { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + /* + * currently not allowed to be set as per + * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml + * and needs to set in userspace: + * + * linux,default-trigger = "netdev"; + */ + pinctrl-names = "default"; + pinctrl-0 = <&spd_led>; + }; + }; + + mcu3v3: mcu3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "MCU3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_ddr: vcc-ddr-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_io: vcc-io-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_LAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: vcc-sd-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + startup-delay-us = <500>; + regulator-name = "VCC_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwren>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + regulator-always-on; + regulator-boot-on; + }; + + vcc33_hdmi: vcc33-hdmi-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC33_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcca_33>; + regulator-always-on; + regulator-boot-on; + }; + + vcca_33: vcca-33-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_11: vdd-11-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vdd11_hdmi: vdd11-hdmi-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD11_HDMI"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vdd_11>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_arm: vdd-arm-regulator { + compatible = "pwm-regulator"; + regulator-name = "VDD_ARM"; + pwms = <&pwm1 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + /* + * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV. + * Since there are HW blocks in PD_LOGIC (which are all driven by + * this supply), that either do not have a driver at all or the + * driver does not implement regulator support we have to make + * sure here that the voltage never drops below 1050 mV. + */ + vdd_log: vdd-log-regulator { + compatible = "pwm-regulator"; + regulator-name = "VDD_LOG"; + pwms = <&pwm2 0 25000 1>; + pwm-dutycycle-range = <30 100>; + pwm-supply = <&vcc_sys>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <4000>; + regulator-always-on; + regulator-boot-on; + }; + +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + vmmc-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + cap-mmc-highspeed; + mmc-ddr-3_3v; + no-sd; + no-sdio; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_lan>; + phy-mode = "rmii"; + phy-handle = <&phy0>; + assigned-clocks = <&cru SCLK_MAC_SRC>; + assigned-clock-rates= <50000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + status = "okay"; +}; + +&gpio0 { + gpio-line-names = /* GPIO0 A0-A7 */ + "", "", "HEADER_5", "HEADER_3", + "", "", "", "", + /* GPIO0 B0-B7 */ + "HEADER_22", "HEADER_23", "", "HEADER_19", + "HEADER_26", "HEADER_21", "HEADER_24", "", + /* GPIO0 C0-C7 */ + "", "HEADER_18", "", "", + "", "", "", "", + /* GPIO0 D0-D7 */ + "HEADER_36", "", "", "", + "", "", "HEADER_13", ""; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A0-A7 */ + "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37", + "HEADER_40", "HEADER_38", "", "", + /* GPIO1 B0-B7 */ + "HEADER_11", "", "", "HEADER_29", + "HEADER_31", "", "", "", + /* GPIO1 C0-C7 */ + "", "", "", "", + "", "", "", "", + /* GPIO1 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO2 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO2 C0-C7 */ + "", "", "", "", + "HEADER_27", "", "", "", + /* GPIO2 D0-D7 */ + "", "", "HEADER_8", "HEADER_10", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO3 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO3 C0-C7 */ + "", "HEADER_32", "", "", + "", "", "", "HEADER_12", + /* GPIO3 D0-D7 */ + "", "", "", "HEADER_15", + "", "", "", ""; +}; + +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + +&mdio { + phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + max-speed = <100>; + /* T2.2.4 min. 1 us */ + reset-assert-us = <10>; + /* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */ + reset-deassert-us = <20>; + reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&dp83848c_rst>; + }; +}; + +&pinctrl { + dp83848c { + dp83848c_rst: dp83848c-rst { + rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ir-receiver { + ir_int: ir-int { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + power_led: power-led { + rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + spd_led: spd-led { + rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + host_drv: host-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_io>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + vmmc-supply = <&vcc_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_otg { + vusb_a-supply = <&vcc_io>; + vusb_d-supply = <&vdd_11>; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb2phy_host { + status = "okay"; +}; + +&usb2phy_otg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index 01edf244dd..e2264c40b9 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rk3128-power.h> / { compatible = "rockchip,rk3128"; @@ -15,6 +16,20 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + arm-pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, @@ -100,6 +115,27 @@ }; }; + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <975000 975000 1250000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1050000 1050000 1250000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1150000 1150000 1250000>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <1250000 1250000 1250000>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, @@ -130,9 +166,119 @@ }; }; + gpu: gpu@10090000 { + compatible = "rockchip,rk3128-mali", "arm,mali-400"; + reg = <0x10090000 0x10000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1"; + clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + resets = <&cru SRST_GPU>; + power-domains = <&power RK3128_PD_GPU>; + status = "disabled"; + }; + pmu: syscon@100a0000 { compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd"; reg = <0x100a0000 0x1000>; + + power: power-controller { + compatible = "rockchip,rk3128-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3128_PD_VIO { + reg = <RK3128_PD_VIO>; + clocks = <&cru ACLK_CIF>, + <&cru HCLK_CIF>, + <&cru DCLK_EBC>, + <&cru HCLK_EBC>, + <&cru ACLK_IEP>, + <&cru HCLK_IEP>, + <&cru ACLK_LCDC0>, + <&cru HCLK_LCDC0>, + <&cru PCLK_MIPI>, + <&cru ACLK_RGA>, + <&cru HCLK_RGA>, + <&cru ACLK_VIO0>, + <&cru ACLK_VIO1>, + <&cru HCLK_VIO>, + <&cru HCLK_VIO_H2P>, + <&cru DCLK_VOP>, + <&cru SCLK_VOP>; + pm_qos = <&qos_ebc>, + <&qos_iep>, + <&qos_lcdc>, + <&qos_rga>, + <&qos_vip>; + #power-domain-cells = <0>; + }; + + power-domain@RK3128_PD_VIDEO { + reg = <RK3128_PD_VIDEO>; + clocks = <&cru ACLK_VDPU>, + <&cru HCLK_VDPU>, + <&cru ACLK_VEPU>, + <&cru HCLK_VEPU>, + <&cru SCLK_HEVC_CORE>; + pm_qos = <&qos_vpu>; + #power-domain-cells = <0>; + }; + + power-domain@RK3128_PD_GPU { + reg = <RK3128_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + }; + }; + + qos_gpu: qos@1012d000 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012d000 0x20>; + }; + + qos_vpu: qos@1012e000 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012e000 0x20>; + }; + + qos_rga: qos@1012f000 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f000 0x20>; + }; + + qos_ebc: qos@1012f080 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f080 0x20>; + }; + + qos_iep: qos@1012f100 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f100 0x20>; + }; + + qos_lcdc: qos@1012f180 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f180 0x20>; + }; + + qos_vip: qos@1012f200 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f200 0x20>; }; gic: interrupt-controller@10139000 { @@ -154,6 +300,9 @@ clocks = <&cru HCLK_OTG>; clock-names = "otg"; dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; phys = <&usb2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; @@ -163,6 +312,7 @@ compatible = "generic-ehci"; reg = <0x101c0000 0x20000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>; phys = <&usb2phy_host>; phy-names = "usb"; status = "disabled"; @@ -172,6 +322,7 @@ compatible = "generic-ohci"; reg = <0x101e0000 0x20000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>; phys = <&usb2phy_host>; phy-names = "usb"; status = "disabled"; @@ -261,6 +412,8 @@ clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; clock-output-names = "usb480m_phy"; + assigned-clocks = <&cru SCLK_USB480M>; + assigned-clock-parents = <&usb2phy>; #clock-cells = <0>; status = "disabled"; @@ -518,6 +671,34 @@ #dma-cells = <1>; }; + gmac: ethernet@2008c000 { + compatible = "rockchip,rk3128-gmac"; + reg = <0x2008c000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + resets = <&cru SRST_GMAC>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3128-pinctrl"; rockchip,grf = <&grf>; @@ -843,6 +1024,10 @@ rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>; }; + sdmmc_det: sdmmc-det { + rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>; + }; + sdmmc_wp: sdmmc-wp { rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>; }; diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi index a721744cbf..96421355c2 100644 --- a/arch/arm/boot/dts/rockchip/rk322x.dtsi +++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi @@ -15,6 +15,10 @@ interrupt-parent = <&gic>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -732,14 +736,20 @@ status = "disabled"; ports { - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vop: endpoint@0 { - reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_vop: endpoint { remote-endpoint = <&vop_out_hdmi>; }; }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi index cb9cdaddff..3f1d640afa 100644 --- a/arch/arm/boot/dts/rockchip/rk3288.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi @@ -19,6 +19,15 @@ aliases { ethernet0 = &gmac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + gpio5 = &gpio5; + gpio6 = &gpio6; + gpio7 = &gpio7; + gpio8 = &gpio8; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -1231,27 +1240,37 @@ compatible = "rockchip,rk3288-dw-hdmi"; reg = <0x0 0xff980000 0x0 0x20000>; reg-io-width = <4>; - #sound-dai-cells = <0>; - rockchip,grf = <&grf>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; clock-names = "iahb", "isfr", "cec"; power-domains = <&power RK3288_PD_VIO>; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { - hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; + hdmi_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_hdmi>; }; + hdmi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_hdmi>; }; }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi index cb4e42ede5..f37137f298 100644 --- a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi @@ -16,6 +16,10 @@ aliases { ethernet0 = &emac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts new file mode 100644 index 0000000000..45dced8087 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; +#include "rv1109.dtsi" +#include "rv1126-sonoff-ihost.dtsi" + +/ { + model = "Sonoff iHost 2G"; + compatible = "itead,sonoff-ihost", "rockchip,rv1109"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1109.dtsi b/arch/arm/boot/dts/rockchip/rv1109.dtsi new file mode 100644 index 0000000000..9cbaa08ab1 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1109.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "rv1126.dtsi" + +/ { + compatible = "rockchip,rv1109"; + + cpus { + /delete-node/ cpu@f02; + /delete-node/ cpu@f03; + }; + + arm-pmu { + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts index f09be84059..0c2396b8f8 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts +++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts @@ -61,7 +61,7 @@ phy-mode = "rgmii"; phy-supply = <&vcc_3v3>; pinctrl-names = "default"; - pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>; + pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>; tx_delay = <0x2a>; rx_delay = <0x1a>; status = "okay"; diff --git a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi index bb34b0c9cb..06b1d7f2d8 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi @@ -87,6 +87,16 @@ <0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>; }; }; + i2c2 { + /omit-if-no-ref/ + i2c2_xfer: i2c2-xfer { + rockchip,pins = + /* i2c2_scl */ + <0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>, + /* i2c2_sda */ + <0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>; + }; + }; pwm2 { /omit-if-no-ref/ pwm2m0_pins: pwm2m0-pins { @@ -105,36 +115,56 @@ }; rgmii { /omit-if-no-ref/ - rgmiim1_pins: rgmiim1-pins { + rgmiim1_miim: rgmiim1-miim { rockchip,pins = /* rgmii_mdc_m1 */ <2 RK_PC2 2 &pcfg_pull_none>, /* rgmii_mdio_m1 */ - <2 RK_PC1 2 &pcfg_pull_none>, - /* rgmii_rxclk_m1 */ - <2 RK_PD3 2 &pcfg_pull_none>, + <2 RK_PC1 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + rgmiim1_rxer: rgmiim1-rxer { + rockchip,pins = + /* rgmii_rxer_m1 */ + <2 RK_PC0 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + rgmiim1_bus2: rgmiim1-bus2 { + rockchip,pins = /* rgmii_rxd0_m1 */ <2 RK_PB5 2 &pcfg_pull_none>, /* rgmii_rxd1_m1 */ <2 RK_PB6 2 &pcfg_pull_none>, - /* rgmii_rxd2_m1 */ - <2 RK_PC7 2 &pcfg_pull_none>, - /* rgmii_rxd3_m1 */ - <2 RK_PD0 2 &pcfg_pull_none>, /* rgmii_rxdv_m1 */ <2 RK_PB4 2 &pcfg_pull_none>, - /* rgmii_txclk_m1 */ - <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>, /* rgmii_txd0_m1 */ <2 RK_PC3 2 &pcfg_pull_none_drv_level_3>, /* rgmii_txd1_m1 */ <2 RK_PC4 2 &pcfg_pull_none_drv_level_3>, + /* rgmii_txen_m1 */ + <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>; + }; + /omit-if-no-ref/ + rgmiim1_bus4: rgmiim1-bus4 { + rockchip,pins = + /* rgmii_rxclk_m1 */ + <2 RK_PD3 2 &pcfg_pull_none>, + /* rgmii_rxd2_m1 */ + <2 RK_PC7 2 &pcfg_pull_none>, + /* rgmii_rxd3_m1 */ + <2 RK_PD0 2 &pcfg_pull_none>, + /* rgmii_txclk_m1 */ + <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>, /* rgmii_txd2_m1 */ <2 RK_PD1 2 &pcfg_pull_none_drv_level_3>, /* rgmii_txd3_m1 */ - <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>, - /* rgmii_txen_m1 */ - <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>; + <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>; + }; + /omit-if-no-ref/ + rgmiim1_mclkinout: rgmiim1-mclkinout { + rockchip,pins = + /* rgmii_clk_m1 */ + <2 RK_PB7 2 &pcfg_pull_none>; }; }; sdmmc0 { @@ -263,6 +293,14 @@ /* uart3_tx_m0 */ <3 RK_PC6 4 &pcfg_pull_up>; }; + /omit-if-no-ref/ + uart3m2_xfer: uart3m2-xfer { + rockchip,pins = + /* uart3_rx_m2 */ + <3 RK_PA1 4 &pcfg_pull_up>, + /* uart3_tx_m2 */ + <3 RK_PA0 4 &pcfg_pull_up>; + }; }; uart4 { /omit-if-no-ref/ @@ -273,6 +311,14 @@ /* uart4_tx_m0 */ <3 RK_PA4 4 &pcfg_pull_up>; }; + /omit-if-no-ref/ + uart4m2_xfer: uart4m2-xfer { + rockchip,pins = + /* uart4_rx_m2 */ + <1 RK_PD4 3 &pcfg_pull_up>, + /* uart4_tx_m2 */ + <1 RK_PD5 3 &pcfg_pull_up>; + }; }; uart5 { /omit-if-no-ref/ diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts new file mode 100644 index 0000000000..77386a48d8 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; +#include "rv1126.dtsi" +#include "rv1126-sonoff-ihost.dtsi" + +/ { + model = "Sonoff iHost 4G"; + compatible = "itead,sonoff-ihost", "rockchip,rv1126"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi new file mode 100644 index 0000000000..32b329e87a --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +/ { + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + sdio_pwrseq: pwrseq-sdio { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_buck5>; + vcc6-supply = <&vcc_buck5>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_npu_vepu: DCDC_REG1 { + regulator-name = "vdd_npu_vepu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_buck5: DCDC_REG5 { + regulator-name = "vcc_buck5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2200000>; + }; + }; + + vcc_0v8: LDO_REG1 { + regulator-name = "vcc_0v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG2 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd0v8_pmu: LDO_REG3 { + regulator-name = "vcc0v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <800000>; + }; + }; + + vcc_1v8: LDO_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_dovdd: LDO_REG5 { + regulator-name = "vcc_dovdd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_dvdd: LDO_REG6 { + regulator-name = "vcc_dvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_avdd: LDO_REG7 { + regulator-name = "vcc_avdd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG8 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: LDO_REG9 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0: SWITCH_REG1 { + regulator-name = "vcc_5v0"; + }; + + vcc_3v3: SWITCH_REG2 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "xin32k"; + }; +}; + +&gmac { + assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>, + <&cru CLK_GMAC_TX_RX>; + assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>, + <&cru RMII_MODE_CLK>; + assigned-clock-rates = <0>, <50000000>; + clock_in_out = "output"; + phy-handle = <&phy>; + phy-mode = "rmii"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>; + status = "okay"; +}; + +&mdio { + phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <ð_phy_rst>; + reset-active-low; + reset-assert-us = <50000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + ethernet { + eth_phy_rst: eth-phy-rst { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + bt { + bt_enable: bt-enable { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_dev: bt-wake-dev { + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio0-supply = <&vcc1v8_pmu>; + pmuio1-supply = <&vcc3v3_sys>; + vccio1-supply = <&vcc_1v8>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_1v8>; + vccio4-supply = <&vcc_dovdd>; + vccio5-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_dovdd>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <100000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>; + rockchip,default-sample-phase = <90>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>; + rockchip,default-sample-phase = <90>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr104; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723ds-bt"; + device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */ + enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */ + host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */ + max-speed = <2000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3m2_xfer>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4m2_xfer>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi index 9ccd1bad62..bb603cae13 100644 --- a/arch/arm/boot/dts/rockchip/rv1126.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi @@ -21,6 +21,13 @@ aliases { i2c0 = &i2c0; + i2c2 = &i2c2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; }; cpus { @@ -231,6 +238,20 @@ status = "disabled"; }; + i2c2: i2c@ff400000 { + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; + reg = <0xff400000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + rockchip,grf = <&pmugrf>; + clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart1: serial@ff410000 { compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; reg = <0xff410000 0x100>; diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts index a076a1dfe4..0d8495792a 100644 --- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts @@ -184,6 +184,28 @@ }; }; + i2c-gpio-2 { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + + touchscreen@20 { + compatible = "cypress,aries-touchkey"; + reg = <0x20>; + + interrupt-parent = <&gpl0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&vtouchled_reg>; + vcc-supply = <&vtouch_reg>; + linux,keycodes = <KEY_MENU>, <KEY_BACK>; + }; + }; + spi-3 { compatible = "spi-gpio"; #address-cells = <1>; @@ -380,6 +402,23 @@ vusb_a-supply = <&vusbdac_reg>; }; +&i2c_1 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + lis3dh: accelerometer@19 { + compatible = "st,lis3dh-accel"; + reg = <0x19>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; + &i2c_3 { status = "okay"; @@ -513,7 +552,6 @@ regulator-name = "TOUCH_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; }; vpll_reg: LDO10 { diff --git a/arch/arm/boot/dts/samsung/exynos4x12.dtsi b/arch/arm/boot/dts/samsung/exynos4x12.dtsi index 83d9d0a0a6..b4b5e76914 100644 --- a/arch/arm/boot/dts/samsung/exynos4x12.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4x12.dtsi @@ -517,15 +517,12 @@ iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; status = "disabled"; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - i2c1_isp: i2c-isp@940000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x00940000 0x100>; diff --git a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi index d5d88771ef..0f87abeddc 100644 --- a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi @@ -425,7 +425,7 @@ gpio0: gpio@8012e000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8012e000 0x80>; + reg = <0x8012e000 0x80>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -440,7 +440,7 @@ gpio1: gpio@8012e080 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8012e080 0x80>; + reg = <0x8012e080 0x80>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -455,7 +455,7 @@ gpio2: gpio@8000e000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8000e000 0x80>; + reg = <0x8000e000 0x80>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -470,7 +470,7 @@ gpio3: gpio@8000e080 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8000e080 0x80>; + reg = <0x8000e080 0x80>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -485,7 +485,7 @@ gpio4: gpio@8000e100 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8000e100 0x80>; + reg = <0x8000e100 0x80>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -500,7 +500,7 @@ gpio5: gpio@8000e180 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8000e180 0x80>; + reg = <0x8000e180 0x80>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -515,7 +515,7 @@ gpio6: gpio@8011e000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8011e000 0x80>; + reg = <0x8011e000 0x80>; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -530,7 +530,7 @@ gpio7: gpio@8011e080 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8011e080 0x80>; + reg = <0x8011e080 0x80>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -545,7 +545,7 @@ gpio8: gpio@a03fe000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0xa03fe000 0x80>; + reg = <0xa03fe000 0x80>; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/st/ste-href-ab8500.dtsi b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi index e1de9d389a..5eeb44c5e9 100644 --- a/arch/arm/boot/dts/st/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi @@ -9,6 +9,54 @@ soc { prcmu@80157000 { ab8500 { + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + regulator { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + gpio { /* Hog a few default settings */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/st/ste-href-ab8505.dtsi b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi new file mode 100644 index 0000000000..268db68ccf --- /dev/null +++ b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2023 Linus Walleij <linus.walleij@linaro.org> + */ + +#include "ste-ab8505.dtsi" + +/ { + soc { + prcmu@80157000 { + ab8505 { + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + regulator { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + + gpio { + /* Hog a few default settings */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio2_default_mode>, + <&gpio4_default_mode>, + <&gpio10_default_mode>, + <&gpio11_default_mode>, + <&gpio12_default_mode>, + <&gpio13_default_mode>, + <&gpio16_default_mode>, + <&gpio24_default_mode>, + <&gpio25_default_mode>, + <&gpio36_default_mode>, + <&gpio37_default_mode>, + <&gpio38_default_mode>, + <&gpio39_default_mode>, + <&gpio42_default_mode>, + <&gpio26_default_mode>, + <&gpio35_default_mode>, + <&ycbcr_default_mode>, + <&pwm_default_mode>, + <&adi1_default_mode>, + <&usbuicc_default_mode>, + <&dmic_default_mode>, + <&extcpena_default_mode>, + <&modsclsda_default_mode>; + + /* + * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42 + * are muxed in as GPIO, and configured as INPUT PULL DOWN + */ + gpio2 { + gpio2_default_mode: gpio2_default { + default_mux { + function = "gpio"; + groups = "gpio2_a_1"; + }; + default_cfg { + pins = "GPIO2_T9"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio4 { + gpio4_default_mode: gpio4_default { + default_mux { + function = "gpio"; + groups = "gpio4_a_1"; + }; + default_cfg { + pins = "GPIO4_W2"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio10 { + gpio10_default_mode: gpio10_default { + default_mux { + function = "gpio"; + groups = "gpio10_d_1"; + }; + default_cfg { + pins = "GPIO10_U17"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio11 { + gpio11_default_mode: gpio11_default { + default_mux { + function = "gpio"; + groups = "gpio11_d_1"; + }; + default_cfg { + pins = "GPIO11_AA18"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio12 { + gpio12_default_mode: gpio12_default { + default_mux { + function = "gpio"; + groups = "gpio12_d_1"; + }; + default_cfg { + pins = "GPIO12_U16"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio13 { + gpio13_default_mode: gpio13_default { + default_mux { + function = "gpio"; + groups = "gpio13_d_1"; + }; + default_cfg { + pins = "GPIO13_W17"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio16 { + gpio16_default_mode: gpio16_default { + default_mux { + function = "gpio"; + groups = "gpio16_a_1"; + }; + default_cfg { + pins = "GPIO16_F15"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio24 { + gpio24_default_mode: gpio24_default { + default_mux { + function = "gpio"; + groups = "gpio24_a_1"; + }; + default_cfg { + pins = "GPIO24_T14"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio25 { + gpio25_default_mode: gpio25_default { + default_mux { + function = "gpio"; + groups = "gpio25_a_1"; + }; + default_cfg { + pins = "GPIO25_R16"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio36 { + gpio36_default_mode: gpio36_default { + default_mux { + function = "gpio"; + groups = "gpio36_a_1"; + }; + default_cfg { + pins = "GPIO36_A17"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio37 { + gpio37_default_mode: gpio37_default { + default_mux { + function = "gpio"; + groups = "gpio37_a_1"; + }; + default_cfg { + pins = "GPIO37_E15"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio38 { + gpio38_default_mode: gpio38_default { + default_mux { + function = "gpio"; + groups = "gpio38_a_1"; + }; + default_cfg { + pins = "GPIO38_C17"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio39 { + gpio39_default_mode: gpio39_default { + default_mux { + function = "gpio"; + groups = "gpio39_a_1"; + }; + default_cfg { + pins = "GPIO39_E16"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio42 { + gpio42_default_mode: gpio42_default { + default_mux { + function = "gpio"; + groups = "gpio42_a_1"; + }; + default_cfg { + pins = "GPIO42_U2"; + input-enable; + bias-pull-down; + }; + }; + }; + /* + * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW + */ + gpio26 { + gpio26_default_mode: gpio26_default { + default_mux { + function = "gpio"; + groups = "gpio26_d_1"; + }; + default_cfg { + pins = "GPIO26_M16"; + output-low; + }; + }; + }; + gpio35 { + gpio35_default_mode: gpio35_default { + default_mux { + function = "gpio"; + groups = "gpio35_d_1"; + }; + default_cfg { + pins = "GPIO35_W15"; + output-low; + }; + }; + }; + /* + * This sets up the YCBCR connector pins, i.e. analog video out. + * Set as input with no bias. + */ + ycbcr { + ycbcr_default_mode: ycbcr_default { + default_mux { + function = "ycbcr"; + groups = "ycbcr0123_d_1"; + }; + default_cfg { + pins = "GPIO6_Y18", + "GPIO7_AA20", + "GPIO8_W18", + "GPIO9_AA19"; + input-enable; + bias-disable; + }; + }; + }; + /* This sets up the PWM pins 14 and 15 */ + pwm { + pwm_default_mode: pwm_default { + default_mux { + function = "pwmout"; + groups = "pwmout1_d_1", "pwmout2_d_1"; + }; + default_cfg { + pins = "GPIO14_F14", + "GPIO15_B17"; + input-enable; + bias-pull-down; + }; + }; + }; + /* This sets up audio interface 1 */ + adi1 { + adi1_default_mode: adi1_default { + default_mux { + function = "adi1"; + groups = "adi1_d_1"; + }; + default_cfg { + pins = "GPIO17_P5", + "GPIO18_R5", + "GPIO19_U5", + "GPIO20_T5"; + input-enable; + bias-pull-down; + }; + }; + }; + /* This sets up the USB UICC pins */ + usbuicc { + usbuicc_default_mode: usbuicc_default { + default_mux { + function = "usbuicc"; + groups = "usbuicc_d_1"; + }; + default_cfg { + pins = "GPIO21_H19", + "GPIO22_G20", + "GPIO23_G19"; + input-enable; + bias-pull-down; + }; + }; + }; + /* This sets up the microphone pins */ + dmic { + dmic_default_mode: dmic_default { + default_mux { + function = "dmic"; + groups = "dmic12_d_1", + "dmic34_d_1", + "dmic56_d_1"; + }; + default_cfg { + pins = "GPIO27_J6", + "GPIO28_K6", + "GPIO29_G6", + "GPIO30_H6", + "GPIO31_F5", + "GPIO32_G5"; + input-enable; + bias-pull-down; + }; + }; + }; + extcpena { + extcpena_default_mode: extcpena_default { + default_mux { + function = "extcpena"; + groups = "extcpena_d_1"; + }; + default_cfg { + pins = "GPIO34_R17"; + input-enable; + bias-pull-down; + }; + }; + }; + /* Modem I2C setup (SCL and SDA pins) */ + modsclsda { + modsclsda_default_mode: modsclsda_default { + default_mux { + function = "modsclsda"; + groups = "modsclsda_d_1"; + }; + default_cfg { + pins = "GPIO40_T19", + "GPIO41_U19"; + input-enable; + bias-pull-down; + }; + }; + }; + /* + * Clock output pins associated with regulators. + */ + sysclkreq2 { + sysclkreq2_default_mode: sysclkreq2_default { + default_mux { + function = "sysclkreq"; + groups = "sysclkreq2_d_1"; + }; + default_cfg { + pins = "GPIO1_T10"; + input-enable; + bias-disable; + }; + }; + sysclkreq2_sleep_mode: sysclkreq2_sleep { + default_mux { + function = "gpio"; + groups = "gpio1_a_1"; + }; + default_cfg { + pins = "GPIO1_T10"; + input-enable; + bias-pull-down; + }; + }; + }; + sysclkreq4 { + sysclkreq4_default_mode: sysclkreq4_default { + default_mux { + function = "sysclkreq"; + groups = "sysclkreq4_d_1"; + }; + default_cfg { + pins = "GPIO3_U9"; + input-enable; + bias-disable; + }; + }; + sysclkreq4_sleep_mode: sysclkreq4_sleep { + default_mux { + function = "gpio"; + groups = "gpio3_a_1"; + }; + default_cfg { + pins = "GPIO3_U9"; + input-enable; + bias-pull-down; + }; + }; + }; + }; + /* + * Charging is not working on the HREF unless an actual battery is + * mounted, most HREFs have a DC cable in to the "battery power" + * which means this will only be cofusing. So do not enable charging + * of the HREFs. + */ + ab8500_fg { + status = "disabled"; + }; + ab8500_btemp { + status = "disabled"; + }; + ab8500_charger { + status = "disabled"; + }; + ab8500_chargalg { + status = "disabled"; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/st/ste-href.dtsi b/arch/arm/boot/dts/st/ste-href.dtsi index 13b11dbeba..fbf0309e10 100644 --- a/arch/arm/boot/dts/st/ste-href.dtsi +++ b/arch/arm/boot/dts/st/ste-href.dtsi @@ -242,61 +242,6 @@ status = "okay"; }; - prcmu@80157000 { - ab8500 { - gpio { - }; - - phy { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&usb_a_1_default>; - pinctrl-1 = <&usb_a_1_sleep>; - }; - - regulator { - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-name = "V-DISPLAY"; - }; - - ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-name = "V-eMMC1"; - }; - - ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-name = "V-MMC-SD"; - }; - - ab8500_ldo_intcore_reg: ab8500_ldo_intcore { - regulator-name = "V-INTCORE"; - }; - - ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - regulator-name = "V-TVOUT"; - }; - - ab8500_ldo_audio_reg: ab8500_ldo_audio { - regulator-name = "V-AUD"; - }; - - ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - regulator-name = "V-AMIC1"; - }; - - ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { - regulator-name = "V-AMIC2"; - }; - - ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - regulator-name = "V-DMIC"; - }; - - ab8500_ldo_ana_reg: ab8500_ldo_ana { - regulator-name = "V-CSI/DSI"; - }; - }; - }; - }; - pinctrl { sdi0 { sdi0_default_mode: sdi0_default { diff --git a/arch/arm/boot/dts/st/ste-href520-tvk.dts b/arch/arm/boot/dts/st/ste-href520-tvk.dts index 7f661f8f13..5677df43c3 100644 --- a/arch/arm/boot/dts/st/ste-href520-tvk.dts +++ b/arch/arm/boot/dts/st/ste-href520-tvk.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "ste-db8520.dtsi" +#include "ste-href-ab8505.dtsi" #include "ste-hrefv60plus.dtsi" #include "ste-href-tvk1281618-r3.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts index a29e345a43..b142bb2d38 100644 --- a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "ste-db8500.dtsi" +#include "ste-href-ab8500.dtsi" #include "ste-hrefprev60.dtsi" #include "ste-href-stuib.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts index 1968bd1431..5da1ff41b0 100644 --- a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "ste-db8500.dtsi" +#include "ste-href-ab8500.dtsi" #include "ste-hrefprev60.dtsi" #include "ste-href-tvk1281618-r2.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefprev60.dtsi b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi index 9859ee91a1..c87fd27b44 100644 --- a/arch/arm/boot/dts/st/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi @@ -62,7 +62,7 @@ // External Micro SD slot mmc@80126000 { - cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; + cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; }; pinctrl { diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts index 7a5b6aa1db..c4abe24a7c 100644 --- a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "ste-db8500.dtsi" +#include "ste-href-ab8500.dtsi" #include "ste-hrefv60plus.dtsi" #include "ste-href-stuib.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts index d5af3f3751..f55e8de2b5 100644 --- a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "ste-db8500.dtsi" +#include "ste-href-ab8500.dtsi" #include "ste-hrefv60plus.dtsi" #include "ste-href-tvk1281618-r2.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi index e66fa59c2d..b23966c16a 100644 --- a/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi @@ -3,7 +3,6 @@ * Copyright 2012 ST-Ericsson AB */ -#include "ste-href-ab8500.dtsi" #include "ste-href.dtsi" / { @@ -191,7 +190,7 @@ // External Micro SD slot mmc@80126000 { - cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 + cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 }; pinctrl { diff --git a/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi index 6816eef39d..4d37c5fb55 100644 --- a/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi @@ -52,7 +52,7 @@ gpio0: gpio@101e4000 { compatible = "st,nomadik-gpio"; - reg = <0x101e4000 0x80>; + reg = <0x101e4000 0x80>; interrupt-parent = <&vica>; interrupts = <6>; interrupt-controller; @@ -66,7 +66,7 @@ gpio1: gpio@101e5000 { compatible = "st,nomadik-gpio"; - reg = <0x101e5000 0x80>; + reg = <0x101e5000 0x80>; interrupt-parent = <&vica>; interrupts = <7>; interrupt-controller; @@ -80,7 +80,7 @@ gpio2: gpio@101e6000 { compatible = "st,nomadik-gpio"; - reg = <0x101e6000 0x80>; + reg = <0x101e6000 0x80>; interrupt-parent = <&vica>; interrupts = <8>; interrupt-controller; @@ -94,7 +94,7 @@ gpio3: gpio@101e7000 { compatible = "st,nomadik-gpio"; - reg = <0x101e7000 0x80>; + reg = <0x101e7000 0x80>; ngpio = <28>; interrupt-parent = <&vica>; interrupts = <9>; diff --git a/arch/arm/boot/dts/st/ste-snowball.dts b/arch/arm/boot/dts/st/ste-snowball.dts index 27c2ec51e7..1322abfc7a 100644 --- a/arch/arm/boot/dts/st/ste-snowball.dts +++ b/arch/arm/boot/dts/st/ste-snowball.dts @@ -266,7 +266,7 @@ pinctrl-1 = <&mc0_a_1_sleep>; /* GPIO218 MMC_CD */ - cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts index 463942ae75..c623cc35c5 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts @@ -310,7 +310,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc0_a_2_default>; pinctrl-1 = <&mc0_a_2_sleep>; - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts index c1ae0e23fe..2355ca6e9a 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts @@ -402,7 +402,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc0_a_2_default>; pinctrl-1 = <&mc0_a_2_sleep>; - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts index b21e40da3d..ad9a20ccaa 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts @@ -362,7 +362,7 @@ pinctrl-0 = <&mc0_a_2_default>; pinctrl-1 = <&mc0_a_2_sleep>; /* "flash detect" actually card detect */ - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts index 6e586e8755..229f7c3210 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts @@ -412,7 +412,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc0_a_2_default>; pinctrl-1 = <&mc0_a_2_sleep>; - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts index ba4421080b..cdb147dcc1 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts @@ -238,7 +238,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc0_a_1_default>; pinctrl-1 = <&mc0_a_1_sleep>; - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32f469-disco.dts b/arch/arm/boot/dts/st/stm32f469-disco.dts index cbbd521bf0..8a4f8ddd08 100644 --- a/arch/arm/boot/dts/st/stm32f469-disco.dts +++ b/arch/arm/boot/dts/st/stm32f469-disco.dts @@ -69,16 +69,9 @@ serial0 = &usart3; }; - mmc_vcard: mmc_vcard { + vcc_3v3: vcc-3v3 { compatible = "regulator-fixed"; - regulator-name = "mmc_vcard"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_dsi: vdd-dsi { - compatible = "regulator-fixed"; - regulator-name = "vdd_dsi"; + regulator-name = "vcc_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -164,7 +157,7 @@ compatible = "orisetech,otm8009a"; reg = <0>; /* dsi virtual channel (0..3) */ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; - power-supply = <&vdd_dsi>; + power-supply = <&vcc_3v3>; status = "okay"; port { @@ -219,7 +212,7 @@ &sdio { status = "okay"; - vmmc-supply = <&mmc_vcard>; + vmmc-supply = <&vcc_3v3>; cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>; broken-cd; pinctrl-names = "default", "opendrain"; diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi index 53a8e2dec9..65c72b6fcc 100644 --- a/arch/arm/boot/dts/st/stm32f746.dtsi +++ b/arch/arm/boot/dts/st/stm32f746.dtsi @@ -274,6 +274,26 @@ clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; }; + spi2: spi@40003800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40003800 0x400>; + interrupts = <36>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>; + status = "disabled"; + }; + + spi3: spi@40003c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40003c00 0x400>; + interrupts = <51>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>; + status = "disabled"; + }; + usart2: serial@40004400 { compatible = "st,stm32f7-uart"; reg = <0x40004400 0x400>; @@ -491,9 +511,30 @@ status = "disabled"; }; + spi1: spi@40013000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40013000 0x400>; + interrupts = <35>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>; + status = "disabled"; + }; + + spi4: spi@40013400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40013400 0x400>; + interrupts = <84>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>; + status = "disabled"; + }; + syscfg: syscon@40013800 { compatible = "st,stm32-syscfg", "syscon"; reg = <0x40013800 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>; }; exti: interrupt-controller@40013c00 { @@ -554,6 +595,26 @@ }; }; + spi5: spi@40015000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40015000 0x400>; + interrupts = <85>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>; + status = "disabled"; + }; + + spi6: spi@40015400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40015400 0x400>; + interrupts = <86>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>; + status = "disabled"; + }; + ltdc: display-controller@40016800 { compatible = "st,stm32-ltdc"; reg = <0x40016800 0x200>; diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi index abf2acd37b..68d32f9f53 100644 --- a/arch/arm/boot/dts/st/stm32mp135.dtsi +++ b/arch/arm/boot/dts/st/stm32mp135.dtsi @@ -8,5 +8,16 @@ / { soc { + dcmipp: dcmipp@5a000000 { + compatible = "st,stm32mp13-dcmipp"; + reg = <0x5a000000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc DCMIPP_R>; + clocks = <&rcc DCMIPP_K>; + status = "disabled"; + + port { + }; + }; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi index 6150891752..fa4cbd312e 100644 --- a/arch/arm/boot/dts/st/stm32mp151.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151.dtsi @@ -1521,6 +1521,8 @@ clocks = <&usbphyc>, <&rcc USBH>; resets = <&rcc USBH_R>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphyc_port0>; + phy-names = "usb"; status = "disabled"; }; @@ -1531,6 +1533,8 @@ resets = <&rcc USBH_R>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; companion = <&usbh_ohci>; + phys = <&usbphyc_port0>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi index dd23de8510..3938d357e1 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi @@ -206,8 +206,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts index c27963898b..ce5937270a 100644 --- a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts @@ -59,7 +59,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi index 5f85598cc7..5c1cc48e51 100644 --- a/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi +++ b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi @@ -313,8 +313,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts index 6226189431..c20a73841c 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts @@ -65,7 +65,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts index c7c4d7e89d..5e2eaf57ce 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts @@ -64,7 +64,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi index f928cfb80b..4792004cab 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi @@ -500,14 +500,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts index 2ab77e64f1..3226fb945a 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts @@ -69,7 +69,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts index cd9c3ff537..9eb9a1bf4f 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts @@ -362,7 +362,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts index bd67a1db91..527c33be66 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts @@ -197,14 +197,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi index 4e8b2d2b30..bf0c32027b 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi +++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi @@ -547,14 +547,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi index f09b7c384b..fc3a2386db 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi @@ -567,9 +567,6 @@ baseboard_eeprom: &sip_eeprom { }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; - status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi index 35b1034aa3..bb4f8a0b93 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi @@ -152,7 +152,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi index 46b87a27d8..466d9701ad 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi @@ -305,7 +305,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi index abc595350e..b5bc53accd 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi @@ -119,12 +119,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi index 0069ad75d5..343a4613df 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi @@ -489,8 +489,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi index 92d906bfd5..bc4ddcbdd5 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi @@ -312,12 +312,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi index ab7f0ba496..6e79c4b6fe 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi @@ -168,12 +168,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi index 511113f2e3..f7634c51ef 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi @@ -680,7 +680,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi index bff73a0ed1..5c88a90903 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi @@ -36,9 +36,9 @@ qmss: qmss@2a40000 { qpend { qpend-0 { qrange = <658 8>; - interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 - 0 43 0xf04 0 44 0xf04 0 45 0xf04 - 0 46 0xf04 0 47 0xf04>; + interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; }; qpend-1 { qrange = <528 16>; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts index 7bfc80f1af..f0ddbbcdc9 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts @@ -9,7 +9,7 @@ #include "keystone-k2g.dtsi" / { - compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; + compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; model = "Texas Instruments K2G General Purpose EVM"; memory@800000000 { diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi index f6306933ff..7109ca0316 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi @@ -37,9 +37,9 @@ qmss: qmss@4020000 { qpend { qpend-0 { qrange = <77 8>; - interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04 - 0 311 0xf04 0 312 0xf04 0 313 0xf04 - 0 314 0xf04 0 315 0xf04>; + interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04 + 0 311 0xf04 0 312 0xf04 0 313 0xf04 + 0 314 0xf04 0 315 0xf04>; qalloc-by-id; }; }; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts index 206df8a8d9..8dfb542950 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts @@ -10,7 +10,7 @@ #include "keystone-k2hk.dtsi" / { - compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; + compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking EVM"; reserved-memory { diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi index 8a421c65f9..c2ee775eab 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi @@ -49,9 +49,9 @@ qmss: qmss@2a40000 { qpend { qpend-0 { qrange = <658 8>; - interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 - 0 43 0xf04 0 44 0xf04 0 45 0xf04 - 0 46 0xf04 0 47 0xf04>; + interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; }; qpend-1 { qrange = <8704 16>; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi index 5ec6680a53..1afebd7458 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi @@ -36,9 +36,9 @@ qmss: qmss@2a40000 { qpend { qpend-0 { qrange = <658 8>; - interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 - 0 43 0xf04 0 44 0xf04 0 45 0xf04 - 0 46 0xf04 0 47 0xf04>; + interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; }; qpend-1 { qrange = <528 16>; diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile index d2b590004f..95c68135dd 100644 --- a/arch/arm/boot/dts/ti/omap/Makefile +++ b/arch/arm/boot/dts/ti/omap/Makefile @@ -79,7 +79,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ - omap4-var-stk-om44.dtb + omap4-var-stk-om44.dtb \ + omap4-xyboard-mz609.dtb \ + omap4-xyboard-mz617.dtb dtb-$(CONFIG_SOC_AM33XX) += \ am335x-baltos-ir2110.dtb \ am335x-baltos-ir3220.dtb \ @@ -129,6 +131,16 @@ dtb-$(CONFIG_SOC_AM43XX) += \ am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo +am571x-idk-overlays-dtbs := am571x-idk.dtb \ + am571x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2587.dtbo +am572x-idk-overlays-dtbs := am572x-idk.dtb \ + am572x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2045.dtbo + +# Build time test only, enabled by CONFIG_OF_ALL_DTBS +dtb- += \ + am571x-idk-overlays.dtb \ + am572x-idk-overlays.dtb + dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ diff --git a/arch/arm/boot/dts/ti/omap/am571x-idk.dts b/arch/arm/boot/dts/ti/omap/am571x-idk.dts index 4842502028..322cf79d22 100644 --- a/arch/arm/boot/dts/ti/omap/am571x-idk.dts +++ b/arch/arm/boot/dts/ti/omap/am571x-idk.dts @@ -168,8 +168,8 @@ }; &extcon_usb2 { - id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; &sn65hvs882 { diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index 5b240769d3..3e834fc7e3 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -197,7 +197,7 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; ti,enable-id-detection; - id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi index 1d66278c3a..3fca84819d 100644 --- a/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi @@ -169,8 +169,8 @@ }; &extcon_usb2 { - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; }; &sn65hvs882 { diff --git a/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi index 4cdffd6db7..ed5199d7ac 100644 --- a/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi @@ -15,12 +15,12 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; }; extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; }; sound0: sound0 { diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts index a643644430..f747ac56eb 100644 --- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts @@ -293,11 +293,11 @@ }; &extcon_usb1 { - vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; }; &extcon_usb2 { - vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; }; &ipu2 { diff --git a/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi index 31ab0c60ca..f8151c6148 100644 --- a/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi @@ -96,12 +96,12 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; }; extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; }; hdmi0: connector { diff --git a/arch/arm/boot/dts/ti/omap/dra76-evm.dts b/arch/arm/boot/dts/ti/omap/dra76-evm.dts index 57868ac60d..cf9c3d35b0 100644 --- a/arch/arm/boot/dts/ti/omap/dra76-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dra76-evm.dts @@ -533,11 +533,11 @@ }; &extcon_usb1 { - vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; }; &extcon_usb2 { - vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; }; &m_can0 { diff --git a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts index 533ce7ce38..fbff15a0a0 100644 --- a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts @@ -52,7 +52,7 @@ &uart2 { /delete-property/dma-names; - bluetooth { + bluetooth-gnss { compatible = "ti,wl1283-st"; enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */ max-speed = <3000000>; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi index a2bb3609c9..a0c53d9c26 100644 --- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi @@ -6,15 +6,6 @@ #include "motorola-cpcap-mapphone.dtsi" / { - chosen { - stdout-path = &uart3; - }; - - aliases { - display0 = &lcd0; - display1 = &hdmi0; - }; - /* * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, * then 1023 - 1024 seems to contain mbm. @@ -63,46 +54,6 @@ regulator-always-on; }; - /* FS USB Host PHY on port 1 for mdm6600 */ - fsusb1_phy: usb-phy@1 { - compatible = "motorola,mapphone-mdm6600"; - pinctrl-0 = <&usb_mdm6600_pins>; - pinctrl-1 = <&usb_mdm6600_sleep_pins>; - pinctrl-names = "default", "sleep"; - enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ - power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ - reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ - /* mode: gpio_148 gpio_149 */ - motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, - <&gpio5 21 GPIO_ACTIVE_HIGH>; - /* cmd: gpio_103 gpio_104 gpio_142 */ - motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, - <&gpio4 8 GPIO_ACTIVE_HIGH>, - <&gpio5 14 GPIO_ACTIVE_HIGH>; - /* status: gpio_52 gpio_53 gpio_55 */ - motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, - <&gpio2 21 GPIO_ACTIVE_HIGH>, - <&gpio2 23 GPIO_ACTIVE_HIGH>; - #phy-cells = <0>; - }; - - /* HS USB host TLL nop-phy on port 2 for w3glte */ - hsusb2_phy: usb-phy@2 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - /* LCD regulator from sw5 source */ - lcd_regulator: regulator-lcd { - compatible = "regulator-fixed"; - regulator-name = "lcd"; - regulator-min-microvolt = <5050000>; - regulator-max-microvolt = <5050000>; - gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ - enable-active-high; - vin-supply = <&sw5>; - }; - /* This is probably coming straight from the battery.. */ wl12xx_vmmc: regulator-wl12xx { compatible = "regulator-fixed"; @@ -133,41 +84,6 @@ dais = <&mcbsp2_port>, <&mcbsp3_port>; }; - - pwm8: pwm-8 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_direction_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer8>; - ti,clock-source = <0x01>; - }; - - pwm9: pwm-9 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_enable_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer9>; - ti,clock-source = <0x01>; - }; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; - pwm-names = "enable", "direction"; - direction-duty-cycle-ns = <10000000>; - }; - - backlight: backlight { - compatible = "led-backlight"; - - leds = <&backlight_led>; - brightness-levels = <31 63 95 127 159 191 223 255>; - default-brightness-level = <6>; - }; }; &cpu_thermal { @@ -197,57 +113,6 @@ status = "okay"; }; -&dsi1 { - status = "okay"; - vdd-supply = <&vcsi>; - - port { - dsi1_out_ep: endpoint { - remote-endpoint = <&lcd0_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd0: panel@0 { - compatible = "motorola,droid4-panel", "panel-dsi-cm"; - reg = <0>; - label = "lcd0"; - vddi-supply = <&lcd_regulator>; - reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ - - backlight = <&backlight>; - - width-mm = <50>; - height-mm = <89>; - rotation = <90>; - - panel-timing { - clock-frequency = <0>; /* Calculated by dsi */ - - hback-porch = <2>; - hactive = <540>; - hfront-porch = <0>; - hsync-len = <2>; - - vback-porch = <1>; - vactive = <960>; - vfront-porch = <0>; - vsync-len = <1>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; - }; -}; - &hdmi { status = "okay"; pinctrl-0 = <&dss_hdmi_pins>; @@ -262,13 +127,6 @@ }; }; -/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ -&hdqw1w { - pinctrl-0 = <&hdq_pins>; - pinctrl-names = "default"; - ti,mode = "1w"; -}; - &i2c1 { tmp105@48 { compatible = "ti,tmp105"; @@ -322,34 +180,6 @@ }; }; -&i2c2 { - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; - - reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ - - /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, - <&omap4_pmx_core 0x160>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; - - isl29030@44 { - compatible = "isil,isl29030"; - reg = <0x44>; - - pinctrl-names = "default"; - pinctrl-0 = <&als_proximity_pins>; - - interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ - }; -}; - &omap4_pmx_core { /* hdmi_hpd.gpio_63 */ @@ -359,13 +189,6 @@ >; }; - hdq_pins: hdq-pins { - pinctrl-single,pins = < - /* 0x4a100120 hdq_sio.hdq_sio aa27 */ - OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) - >; - }; - /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < @@ -427,73 +250,6 @@ >; }; - touchscreen_pins: touchscreen-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - als_proximity_pins: als-proximity-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_mdm6600_pins: usb-mdm6600-pins { - pinctrl-single,pins = < - /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - - /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - - /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ - OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) - - /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - - /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - - /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - - /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - - /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - - /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - - /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - - /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - - /* Modem sleep pins to keep gpio_49 high with internal pull */ - usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - usb_ulpi_pins: usb-ulpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) @@ -601,18 +357,6 @@ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ >; }; - - vibrator_direction_pin: vibrator-direction-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ - >; - }; - - vibrator_enable_pin: vibrator-enable-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ - >; - }; }; &omap4_pmx_wkup { @@ -629,17 +373,6 @@ status = "disabled"; }; -/* Configure pwm clock source for timers 8 & 9 */ -&timer8 { - assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_32k_ck>; -}; - -&timer9 { - assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_32k_ck>; -}; - /* * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149 * for wake-up events for both the USB PHY and the UART. We can use gpio_149 @@ -672,20 +405,6 @@ }; }; -&usbhsohci { - phys = <&fsusb1_phy>; - phy-names = "usb"; -}; - -&usbhsehci { - phys = <&hsusb2_phy>; -}; - -&usbhshost { - port1-mode = "ohci-phy-4pin-dpdm"; - port2-mode = "ehci-tll"; -}; - /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ &usb_otg_hs { interface-type = <1>; @@ -698,23 +417,6 @@ power = <150>; }; -&i2c4 { - ak8975: magnetometer@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio6>; - interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ - - rotation-matrix = "-1", "0", "0", - "0", "1", "0", - "0", "0", "-1"; - - }; -}; - &mcbsp2 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi new file mode 100644 index 0000000000..f3f9ff02b3 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +/ { + /* FS USB Host PHY on port 1 for mdm6600 */ + fsusb1_phy: usb-phy@1 { + compatible = "motorola,mapphone-mdm6600"; + pinctrl-0 = <&usb_mdm6600_pins>; + pinctrl-1 = <&usb_mdm6600_sleep_pins>; + pinctrl-names = "default", "sleep"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ + /* mode: gpio_148 gpio_149 */ + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + /* cmd: gpio_103 gpio_104 gpio_142 */ + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + /* status: gpio_52 gpio_53 gpio_55 */ + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; + + /* HS USB host TLL nop-phy on port 2 for w3glte */ + hsusb2_phy: usb-phy@2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + pwm8: pwm-8 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: pwm-9 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <10000000>; + }; +}; + +/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ +&hdqw1w { + pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + ti,mode = "1w"; +}; + +&i2c2 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ + + /* gpio_183 with sys_nirq2 pad as wakeup */ + interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, + <&omap4_pmx_core 0x160>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; +}; + +&omap4_pmx_core { + hdq_pins: hdq-pins { + pinctrl-single,pins = < + /* 0x4a100120 hdq_sio.hdq_sio aa27 */ + OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: tmp105-irq-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + touchscreen_pins: touchscreen-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_mdm6600_pins: usb-mdm6600-pins { + pinctrl-single,pins = < + /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + + /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + + /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) + + /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + + /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + + /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + + /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + + /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + + /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + + /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + + /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + /* Modem sleep pins to keep gpio_49 high with internal pull */ + usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + als_proximity_pins: als-proximity-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + vibrator_direction_pin: vibrator-direction-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: vibrator-enable-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; +}; + +&usbhsohci { + phys = <&fsusb1_phy>; + phy-names = "usb"; +}; + +&usbhsehci { + phys = <&hsusb2_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + +&i2c4 { + ak8975: magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ + + rotation-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi new file mode 100644 index 0000000000..a356b3a2f2 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>, + <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>; +}; + +/* + * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel + * dtb. The regulator may not be wired even if a MMC cage is added though. + */ +&mmc1 { + vmmc-supply = <&vsimcard>; + bus-width = <4>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio_176 */ +}; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi new file mode 100644 index 0000000000..8b8de92b54 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-handset.dtsi" + +/ { + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; + }; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: panel@0 { + compatible = "motorola,droid4-panel", "panel-dsi-cm"; + reg = <0>; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + backlight = <&backlight>; + + width-mm = <50>; + height-mm = <89>; + rotation = <90>; + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts index ccf03a7436..1d9000f84f 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts @@ -1,11 +1,20 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-xt8xx.dtsi" / { model = "Motorola Droid Bionic XT875"; compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; }; &keypad { diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts index e833c21f1c..cc3f3e1b65 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts @@ -1,9 +1,21 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-xt8xx.dtsi" / { + model = "Motorola Droid 4 XT894"; + compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + gpio_keys { compatible = "gpio-keys"; @@ -33,11 +45,6 @@ }; }; -/ { - model = "Motorola Droid 4 XT894"; - compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; -}; - &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>; diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts index 01d783826d..24f7d0285f 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts @@ -51,6 +51,12 @@ regulator-name = "unknown"; }; + wl12xx_pwrseq: wl12xx-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&twl 1>; + clock-names = "ext_clock"; + }; + /* regulator for wl12xx on sdio2 */ wl12xx_vmmc: wl12xx-vmmc { pinctrl-names = "default"; @@ -74,6 +80,7 @@ twl: pmic@48 { compatible = "ti,twl6032"; reg = <0x48>; + #clock-cells = <1>; /* IRQ# = 7 */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ interrupt-controller; @@ -294,6 +301,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wl12xx_pins>; vmmc-supply = <&wl12xx_vmmc>; + mmc-pwrseq = <&wl12xx_pwrseq>; interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0x12e>; non-removable; @@ -454,10 +462,12 @@ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART2_RX>; - /* - * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic - * which does not have a driver - */ + bluetooth-gnss { + compatible = "ti,wl1283-st"; + enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; /* GPIO_25 */ + clocks = <&twl 1>; + clock-names = "ext_clock"; + }; }; &uart3 { diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts new file mode 100644 index 0000000000..762934e2d0 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-mz607-mz617.dtsi" + +/ { + model = "Motorola Xyboard MZ609"; + compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display1 = &hdmi0; + }; + + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + backlight_led: led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts new file mode 100644 index 0000000000..b9caea3b7f --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-mz607-mz617.dtsi" + +/ { + model = "Motorola Xyboard MZ617"; + compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display1 = &hdmi0; + }; +}; |