Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 238 insertions, 0 deletions

diff --git a/arch/arm/kernel/phys2virt.S b/arch/arm/kernel/phys2virt.S
new file mode 100644
index 0000000000..fb53db78fe
--- /dev/null
+++ b/arch/arm/kernel/phys2virt.S
@@ -0,0 +1,238 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (c) 2003, 2020 ARM Limited
+ *  All Rights Reserved
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+#ifdef __ARMEB__
+#define LOW_OFFSET	0x4
+#define HIGH_OFFSET	0x0
+#else
+#define LOW_OFFSET	0x0
+#define HIGH_OFFSET	0x4
+#endif
+
+/*
+ * __fixup_pv_table - patch the stub instructions with the delta between
+ *                    PHYS_OFFSET and PAGE_OFFSET, which is assumed to be
+ *                    2 MiB aligned.
+ *
+ * Called from head.S, which expects the following registers to be preserved:
+ *   r1 = machine no, r2 = atags or dtb,
+ *   r8 = phys_offset, r9 = cpuid, r10 = procinfo
+ */
+	__HEAD
+ENTRY(__fixup_pv_table)
+	mov	r0, r8, lsr #PAGE_SHIFT	@ convert to PFN
+	str_l	r0, __pv_phys_pfn_offset, r3
+
+	adr_l	r0, __pv_offset
+	subs	r3, r8, #PAGE_OFFSET	@ PHYS_OFFSET - PAGE_OFFSET
+	mvn	ip, #0
+	strcc	ip, [r0, #HIGH_OFFSET]	@ save to __pv_offset high bits
+	str	r3, [r0, #LOW_OFFSET]	@ save to __pv_offset low bits
+
+	mov	r0, r3, lsr #21		@ constant for add/sub instructions
+	teq	r3, r0, lsl #21 	@ must be 2 MiB aligned
+	bne	0f
+
+	adr_l	r4, __pv_table_begin
+	adr_l	r5, __pv_table_end
+	b	__fixup_a_pv_table
+
+0:	mov	r0, r0			@ deadloop on error
+	b	0b
+ENDPROC(__fixup_pv_table)
+
+	.text
+__fixup_a_pv_table:
+	adr_l	r6, __pv_offset
+	ldr	r0, [r6, #HIGH_OFFSET]	@ pv_offset high word
+	ldr	r6, [r6, #LOW_OFFSET]	@ pv_offset low word
+	cmn	r0, #1
+#ifdef CONFIG_THUMB2_KERNEL
+	@
+	@ The Thumb-2 versions of the patchable sequences are
+	@
+	@ phys-to-virt:			movw	<reg>, #offset<31:21>
+	@				lsl	<reg>, #21
+	@				sub	<VA>, <PA>, <reg>
+	@
+	@ virt-to-phys (non-LPAE):	movw	<reg>, #offset<31:21>
+	@				lsl	<reg>, #21
+	@				add	<PA>, <VA>, <reg>
+	@
+	@ virt-to-phys (LPAE):		movw	<reg>, #offset<31:21>
+	@				lsl	<reg>, #21
+	@				adds	<PAlo>, <VA>, <reg>
+	@				mov	<PAhi>, #offset<39:32>
+	@				adc	<PAhi>, <PAhi>, #0
+	@
+	@ In the non-LPAE case, all patchable instructions are MOVW
+	@ instructions, where we need to patch in the offset into the
+	@ second halfword of the opcode (the 16-bit immediate is encoded
+	@ as imm4:i:imm3:imm8)
+	@
+	@       15       11 10  9           4 3    0  15  14  12 11 8 7    0
+	@      +-----------+---+-------------+------++---+------+----+------+
+	@ MOVW | 1 1 1 1 0 | i | 1 0 0 1 0 0 | imm4 || 0 | imm3 | Rd | imm8 |
+	@      +-----------+---+-------------+------++---+------+----+------+
+	@
+	@ In the LPAE case, we also need to patch in the high word of the
+	@ offset into the immediate field of the MOV instruction, or patch it
+	@ to a MVN instruction if the offset is negative. In this case, we
+	@ need to inspect the first halfword of the opcode, to check whether
+	@ it is MOVW or MOV/MVN, and to perform the MOV to MVN patching if
+	@ needed. The encoding of the immediate is rather complex for values
+	@ of i:imm3 != 0b0000, but fortunately, we never need more than 8 lower
+	@ order bits, which can be patched into imm8 directly (and i:imm3
+	@ cleared)
+	@
+	@      15       11 10  9        5         0  15  14  12 11 8 7    0
+	@     +-----------+---+---------------------++---+------+----+------+
+	@ MOV | 1 1 1 1 0 | i | 0 0 0 1 0 0 1 1 1 1 || 0 | imm3 | Rd | imm8 |
+	@ MVN | 1 1 1 1 0 | i | 0 0 0 1 1 0 1 1 1 1 || 0 | imm3 | Rd | imm8 |
+	@     +-----------+---+---------------------++---+------+----+------+
+	@
+	moveq	r0, #0x200000		@ set bit 21, mov to mvn instruction
+	lsrs	r3, r6, #29		@ isolate top 3 bits of displacement
+	ubfx	r6, r6, #21, #8		@ put bits 28:21 into the MOVW imm8 field
+	bfi	r6, r3, #12, #3		@ put bits 31:29 into the MOVW imm3 field
+	b	.Lnext
+.Lloop:	add	r7, r4
+	adds	r4, #4			@ clears Z flag
+#ifdef CONFIG_ARM_LPAE
+	ldrh	ip, [r7]
+ARM_BE8(rev16	ip, ip)
+	tst	ip, #0x200		@ MOVW has bit 9 set, MVN has it clear
+	bne	0f			@ skip to MOVW handling (Z flag is clear)
+	bic	ip, #0x20		@ clear bit 5 (MVN -> MOV)
+	orr	ip, ip, r0, lsr #16	@ MOV -> MVN if offset < 0
+ARM_BE8(rev16	ip, ip)
+	strh	ip, [r7]
+	@ Z flag is set
+0:
+#endif
+	ldrh	ip, [r7, #2]
+ARM_BE8(rev16	ip, ip)
+	and	ip, #0xf00		@ clear everything except Rd field
+	orreq	ip, r0			@ Z flag set -> MOV/MVN -> patch in high bits
+	orrne	ip, r6			@ Z flag clear -> MOVW -> patch in low bits
+ARM_BE8(rev16	ip, ip)
+	strh	ip, [r7, #2]
+#else
+#ifdef CONFIG_CPU_ENDIAN_BE8
+@ in BE8, we load data in BE, but instructions still in LE
+#define PV_BIT24	0x00000001
+#define PV_IMM8_MASK	0xff000000
+#define PV_IMMR_MSB	0x00080000
+#else
+#define PV_BIT24	0x01000000
+#define PV_IMM8_MASK	0x000000ff
+#define PV_IMMR_MSB	0x00000800
+#endif
+
+	@
+	@ The ARM versions of the patchable sequences are
+	@
+	@ phys-to-virt:			sub	<VA>, <PA>, #offset<31:24>, lsl #24
+	@				sub	<VA>, <PA>, #offset<23:16>, lsl #16
+	@
+	@ virt-to-phys (non-LPAE):	add	<PA>, <VA>, #offset<31:24>, lsl #24
+	@				add	<PA>, <VA>, #offset<23:16>, lsl #16
+	@
+	@ virt-to-phys (LPAE):		movw	<reg>, #offset<31:20>
+	@				adds	<PAlo>, <VA>, <reg>, lsl #20
+	@				mov	<PAhi>, #offset<39:32>
+	@				adc	<PAhi>, <PAhi>, #0
+	@
+	@ In the non-LPAE case, all patchable instructions are ADD or SUB
+	@ instructions, where we need to patch in the offset into the
+	@ immediate field of the opcode, which is emitted with the correct
+	@ rotation value. (The effective value of the immediate is imm12<7:0>
+	@ rotated right by [2 * imm12<11:8>] bits)
+	@
+	@      31   28 27      23 22  20 19  16 15  12 11    0
+	@      +------+-----------------+------+------+-------+
+	@  ADD | cond | 0 0 1 0 1 0 0 0 |  Rn  |  Rd  | imm12 |
+	@  SUB | cond | 0 0 1 0 0 1 0 0 |  Rn  |  Rd  | imm12 |
+	@  MOV | cond | 0 0 1 1 1 0 1 0 |  Rn  |  Rd  | imm12 |
+	@  MVN | cond | 0 0 1 1 1 1 1 0 |  Rn  |  Rd  | imm12 |
+	@      +------+-----------------+------+------+-------+
+	@
+	@ In the LPAE case, we use a MOVW instruction to carry the low offset
+	@ word, and patch in the high word of the offset into the immediate
+	@ field of the subsequent MOV instruction, or patch it to a MVN
+	@ instruction if the offset is negative. We can distinguish MOVW
+	@ instructions based on bits 23:22 of the opcode, and ADD/SUB can be
+	@ distinguished from MOV/MVN (all using the encodings above) using
+	@ bit 24.
+	@
+	@      31   28 27      23 22  20 19  16 15  12 11    0
+	@      +------+-----------------+------+------+-------+
+	@ MOVW | cond | 0 0 1 1 0 0 0 0 | imm4 |  Rd  | imm12 |
+	@      +------+-----------------+------+------+-------+
+	@
+	moveq	r0, #0x400000		@ set bit 22, mov to mvn instruction
+	mov	r3, r6, lsr #16		@ put offset bits 31-16 into r3
+	mov	r6, r6, lsr #24		@ put offset bits 31-24 into r6
+	and	r3, r3, #0xf0		@ only keep offset bits 23-20 in r3
+	b	.Lnext
+.Lloop:	ldr	ip, [r7, r4]
+#ifdef CONFIG_ARM_LPAE
+	tst	ip, #PV_BIT24		@ ADD/SUB have bit 24 clear
+	beq	1f
+ARM_BE8(rev	ip, ip)
+	tst	ip, #0xc00000		@ MOVW has bits 23:22 clear
+	bic	ip, ip, #0x400000	@ clear bit 22
+	bfc	ip, #0, #12		@ clear imm12 field of MOV[W] instruction
+	orreq	ip, ip, r6, lsl #4	@ MOVW -> mask in offset bits 31-24
+	orreq	ip, ip, r3, lsr #4	@ MOVW -> mask in offset bits 23-20
+	orrne	ip, ip, r0		@ MOV  -> mask in offset bits 7-0 (or bit 22)
+ARM_BE8(rev	ip, ip)
+	b	2f
+1:
+#endif
+	tst	ip, #PV_IMMR_MSB		@ rotation value >= 16 ?
+	bic	ip, ip, #PV_IMM8_MASK
+	orreq	ip, ip, r6 ARM_BE8(, lsl #24)	@ mask in offset bits 31-24
+	orrne	ip, ip, r3 ARM_BE8(, lsl #24)	@ mask in offset bits 23-20
+2:
+	str	ip, [r7, r4]
+	add	r4, r4, #4
+#endif
+
+.Lnext:
+	cmp	r4, r5
+	ldrcc	r7, [r4]		@ use branch for delay slot
+	bcc	.Lloop
+	ret	lr
+ENDPROC(__fixup_a_pv_table)
+
+ENTRY(fixup_pv_table)
+	stmfd	sp!, {r4 - r7, lr}
+	mov	r4, r0			@ r0 = table start
+	add	r5, r0, r1		@ r1 = table size
+	bl	__fixup_a_pv_table
+	ldmfd	sp!, {r4 - r7, pc}
+ENDPROC(fixup_pv_table)
+
+	.data
+	.align	2
+	.globl	__pv_phys_pfn_offset
+	.type	__pv_phys_pfn_offset, %object
+__pv_phys_pfn_offset:
+	.word	0
+	.size	__pv_phys_pfn_offset, . -__pv_phys_pfn_offset
+
+	.globl	__pv_offset
+	.type	__pv_offset, %object
+__pv_offset:
+	.quad	0
+	.size	__pv_offset, . -__pv_offset