Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 599 insertions, 0 deletions

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
new file mode 100644
index 0000000000..8c1d4402fd
--- /dev/null
+++ b/arch/arm/mach-mmp/Kconfig
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_MMP
+	bool "Marvell PXA168/910/MMP2/MMP3"
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V7
+	select GPIO_PXA
+	select GPIOLIB
+	select PINCTRL
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/PXA910(MMP), MMP2, and MMP3 processor lines.
+
+if ARCH_MMP
+
+menu "Marvell PXA168/910/MMP2 Implementations"
+
+config MACH_MMP_DT
+	bool "Support MMP (ARMv5) platforms from device tree"
+	depends on ARCH_MULTI_V5
+	select PINCTRL
+	select PINCTRL_SINGLE
+	select ARCH_HAS_RESET_CONTROLLER
+	select CPU_MOHAWK
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_MMP_DT is enabled.
+
+config MACH_MMP2_DT
+	bool "Support MMP2 (ARMv7) platforms from device tree"
+	depends on ARCH_MULTI_V7
+	select PINCTRL
+	select PINCTRL_SINGLE
+	select ARCH_HAS_RESET_CONTROLLER
+	select CPU_PJ4
+	select PM_GENERIC_DOMAINS if PM
+	select PM_GENERIC_DOMAINS_OF if PM && OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree.
+
+config MACH_MMP3_DT
+	bool "Support MMP3 (ARMv7) platforms"
+	depends on ARCH_MULTI_V7
+	select ARM_GIC
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select CACHE_L2X0
+	select PINCTRL
+	select PINCTRL_SINGLE
+	select ARCH_HAS_RESET_CONTROLLER
+	select CPU_PJ4B
+	select PM_GENERIC_DOMAINS if PM
+	select PM_GENERIC_DOMAINS_OF if PM && OF
+	help
+	  Say 'Y' here if you want to include support for platforms
+	  with Marvell MMP3 processor, also known as PXA2128 or
+	  Armada 620.
+
+endmenu
+
+config CPU_PXA168
+	bool
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA168
+
+config CPU_PXA910
+	bool
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA910
+
+config CPU_MMP2
+	bool
+	select CPU_PJ4
+	help
+	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
+
+endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
new file mode 100644
index 0000000000..5d4a1a4a48
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Marvell's PXA168 processors line
+#
+obj-y				+= common.o time.o
+
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_MACH_MMP3_DT)	+= platsmp.o
+endif
+
+# board support
+obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
+obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
+obj-$(CONFIG_MACH_MMP3_DT)	+= mmp3.o
diff --git a/arch/arm/mach-mmp/addr-map.h b/arch/arm/mach-mmp/addr-map.h
new file mode 100644
index 0000000000..3dc2f0b0ec
--- /dev/null
+++ b/arch/arm/mach-mmp/addr-map.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *   Common address map definitions
+ */
+
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/* APB - Application Subsystem Peripheral Bus
+ *
+ * NOTE: the DMA controller registers are actually on the AXI fabric #1
+ * slave port to AHB/APB bridge, due to its close relationship to those
+ * peripherals on APB, let's count it into the ABP mapping area.
+ */
+#define APB_PHYS_BASE		0xd4000000
+#define APB_VIRT_BASE		IOMEM(0xfe000000)
+#define APB_PHYS_SIZE		0x00200000
+
+#define AXI_PHYS_BASE		0xd4200000
+#define AXI_VIRT_BASE		IOMEM(0xfe200000)
+#define AXI_PHYS_SIZE		0x00200000
+
+#define PGU_PHYS_BASE		0xe0000000
+#define PGU_VIRT_BASE		IOMEM(0xfe400000)
+#define PGU_PHYS_SIZE		0x00100000
+
+/* Static Memory Controller - Chip Select 0 and 1 */
+#define SMC_CS0_PHYS_BASE	0x80000000
+#define SMC_CS0_PHYS_SIZE	0x10000000
+#define SMC_CS1_PHYS_BASE	0x90000000
+#define SMC_CS1_PHYS_SIZE	0x10000000
+
+#define APMU_VIRT_BASE		(AXI_VIRT_BASE + 0x82800)
+#define APMU_REG(x)		(APMU_VIRT_BASE + (x))
+
+#define APBC_VIRT_BASE		(APB_VIRT_BASE + 0x015000)
+#define APBC_REG(x)		(APBC_VIRT_BASE + (x))
+
+#define MPMU_VIRT_BASE		(APB_VIRT_BASE + 0x50000)
+#define MPMU_REG(x)		(MPMU_VIRT_BASE + (x))
+
+#define CIU_VIRT_BASE		(AXI_VIRT_BASE + 0x82c00)
+#define CIU_REG(x)		(CIU_VIRT_BASE + (x))
+
+#define SCU_VIRT_BASE		(PGU_VIRT_BASE)
+#define SCU_REG(x)		(SCU_VIRT_BASE + (x))
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
new file mode 100644
index 0000000000..b3c1a248db
--- /dev/null
+++ b/arch/arm/mach-mmp/common.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/mach-mmp/common.c
+ *
+ *  Code common to PXA168 processor lines
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+#include "addr-map.h"
+#include <linux/soc/mmp/cputype.h>
+
+#include "common.h"
+
+#define MMP_CHIPID	CIU_REG(0x00)
+
+unsigned int mmp_chip_id;
+EXPORT_SYMBOL(mmp_chip_id);
+
+static struct map_desc standard_io_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
+		.virtual	= (unsigned long)APB_VIRT_BASE,
+		.length		= APB_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.pfn		= __phys_to_pfn(AXI_PHYS_BASE),
+		.virtual	= (unsigned long)AXI_VIRT_BASE,
+		.length		= AXI_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc mmp2_io_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(PGU_PHYS_BASE),
+		.virtual	= (unsigned long)PGU_VIRT_BASE,
+		.length		= PGU_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init mmp_map_io(void)
+{
+	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+
+	/* this is early, initialize mmp_chip_id here */
+	mmp_chip_id = __raw_readl(MMP_CHIPID);
+}
+
+void __init mmp2_map_io(void)
+{
+	mmp_map_io();
+	iotable_init(mmp2_io_desc, ARRAY_SIZE(mmp2_io_desc));
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
new file mode 100644
index 0000000000..e18f05d5d6
--- /dev/null
+++ b/arch/arm/mach-mmp/common.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/reboot.h>
+
+extern void mmp_timer_init(int irq, unsigned long rate);
+
+extern void __init mmp_map_io(void);
+extern void __init mmp2_map_io(void);
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
new file mode 100644
index 0000000000..8479996a8f
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/mach-mmp/mmp-dt.c
+ *
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/of_clk.h>
+#include <linux/clocksource.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-tauros2.h>
+
+#include "common.h"
+
+static const char *const pxa168_dt_board_compat[] __initconst = {
+	"mrvl,pxa168-aspenite",
+	NULL,
+};
+
+static const char *const pxa910_dt_board_compat[] __initconst = {
+	"mrvl,pxa910-dkb",
+	NULL,
+};
+
+static void __init mmp_init_time(void)
+{
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init(0);
+#endif
+	of_clk_init(NULL);
+	timer_probe();
+}
+
+DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_time	= mmp_init_time,
+	.dt_compat	= pxa168_dt_board_compat,
+MACHINE_END
+
+DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_time	= mmp_init_time,
+	.dt_compat	= pxa910_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
new file mode 100644
index 0000000000..e5ddc32765
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/mach-mmp/mmp2-dt.c
+ *
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/of_clk.h>
+#include <linux/clocksource.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-tauros2.h>
+
+#include "common.h"
+
+static void __init mmp_init_time(void)
+{
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init(0);
+#endif
+	of_clk_init(NULL);
+	timer_probe();
+}
+
+static const char *const mmp2_dt_board_compat[] __initconst = {
+	"mrvl,mmp2",
+	NULL,
+};
+
+DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
+	.map_io		= mmp2_map_io,
+	.init_time	= mmp_init_time,
+	.dt_compat	= mmp2_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp3.c b/arch/arm/mach-mmp/mmp3.c
new file mode 100644
index 0000000000..073a4ee219
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp3.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Marvell MMP3 aka PXA2128 aka 88AP2128 support
+ *
+ *  Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "common.h"
+
+static const char *const mmp3_dt_board_compat[] __initconst = {
+	"marvell,mmp3",
+	NULL,
+};
+
+DT_MACHINE_START(MMP2_DT, "Marvell MMP3")
+	.map_io		= mmp2_map_io,
+	.dt_compat	= mmp3_dt_board_compat,
+	.l2c_aux_val	= 1 << L310_AUX_CTRL_FWA_SHIFT |
+			  L310_AUX_CTRL_DATA_PREFETCH |
+			  L310_AUX_CTRL_INSTR_PREFETCH,
+	.l2c_aux_mask	= 0xc20fffff,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/platsmp.c b/arch/arm/mach-mmp/platsmp.c
new file mode 100644
index 0000000000..c99405469b
--- /dev/null
+++ b/arch/arm/mach-mmp/platsmp.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+#include <asm/smp.h>
+#include "addr-map.h"
+
+#define SW_BRANCH_VIRT_ADDR	CIU_REG(0x24)
+
+static int mmp3_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	/*
+	 * Apparently, the boot ROM on the second core spins on this
+	 * register becoming non-zero and then jumps to the address written
+	 * there. No IPIs involved.
+	 */
+	__raw_writel(__pa_symbol(secondary_startup), SW_BRANCH_VIRT_ADDR);
+	return 0;
+}
+
+static void mmp3_smp_prepare_cpus(unsigned int max_cpus)
+{
+	scu_enable(SCU_VIRT_BASE);
+}
+
+static const struct smp_operations mmp3_smp_ops __initconst = {
+	.smp_prepare_cpus	= mmp3_smp_prepare_cpus,
+	.smp_boot_secondary	= mmp3_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mmp3_smp, "marvell,mmp3-smp", &mmp3_smp_ops);
diff --git a/arch/arm/mach-mmp/regs-timers.h b/arch/arm/mach-mmp/regs-timers.h
new file mode 100644
index 0000000000..0cc4aca40e
--- /dev/null
+++ b/arch/arm/mach-mmp/regs-timers.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *   Timers Module
+ */
+
+#ifndef __ASM_MACH_REGS_TIMERS_H
+#define __ASM_MACH_REGS_TIMERS_H
+
+#define TMR_CCR		(0x0000)
+#define TMR_TN_MM(n, m)	(0x0004 + ((n) << 3) + (((n) + (m)) << 2))
+#define TMR_CR(n)	(0x0028 + ((n) << 2))
+#define TMR_SR(n)	(0x0034 + ((n) << 2))
+#define TMR_IER(n)	(0x0040 + ((n) << 2))
+#define TMR_PLVR(n)	(0x004c + ((n) << 2))
+#define TMR_PLCR(n)	(0x0058 + ((n) << 2))
+#define TMR_WMER	(0x0064)
+#define TMR_WMR		(0x0068)
+#define TMR_WVR		(0x006c)
+#define TMR_WSR		(0x0070)
+#define TMR_ICR(n)	(0x0074 + ((n) << 2))
+#define TMR_WICR	(0x0080)
+#define TMR_CER		(0x0084)
+#define TMR_CMR		(0x0088)
+#define TMR_ILR(n)	(0x008c + ((n) << 2))
+#define TMR_WCR		(0x0098)
+#define TMR_WFAR	(0x009c)
+#define TMR_WSAR	(0x00A0)
+#define TMR_CVWR(n)	(0x00A4 + ((n) << 2))
+
+#define TMR_CCR_CS_0(x)	(((x) & 0x3) << 0)
+#define TMR_CCR_CS_1(x)	(((x) & 0x7) << 2)
+#define TMR_CCR_CS_2(x)	(((x) & 0x3) << 5)
+
+#endif /* __ASM_MACH_REGS_TIMERS_H */
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
new file mode 100644
index 0000000000..fcb190826d
--- /dev/null
+++ b/arch/arm/mach-mmp/time.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-mmp/time.c
+ *
+ *   Support for clocksource and clockevents
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ *   2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
+ *   2008-10-08: Bin Yang <bin.yang@marvell.com>
+ *
+ * The timers module actually includes three timers, each timer with up to
+ * three match comparators. Timer #0 is used here in free-running mode as
+ * the clock source, and match comparator #1 used as clock event device.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <asm/mach/time.h>
+
+#include "regs-timers.h"
+#include <linux/soc/mmp/cputype.h>
+
+#define MAX_DELTA		(0xfffffffe)
+#define MIN_DELTA		(16)
+
+static void __iomem *mmp_timer_base;
+
+/*
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
+ */
+static inline uint32_t timer_read(void)
+{
+	uint32_t val;
+	int delay = 3;
+
+	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
+
+	while (delay--)
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
+
+	return val;
+}
+
+static u64 notrace mmp_read_sched_clock(void)
+{
+	return timer_read();
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/*
+	 * Clear pending interrupt status.
+	 */
+	__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
+
+	/*
+	 * Disable timer 0.
+	 */
+	__raw_writel(0x02, mmp_timer_base + TMR_CER);
+
+	c->event_handler(c);
+
+	return IRQ_HANDLED;
+}
+
+static int timer_set_next_event(unsigned long delta,
+				struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/*
+	 * Disable timer 0.
+	 */
+	__raw_writel(0x02, mmp_timer_base + TMR_CER);
+
+	/*
+	 * Clear and enable timer match 0 interrupt.
+	 */
+	__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_IER(0));
+
+	/*
+	 * Setup new clockevent timer value.
+	 */
+	__raw_writel(delta - 1, mmp_timer_base + TMR_TN_MM(0, 0));
+
+	/*
+	 * Enable timer 0.
+	 */
+	__raw_writel(0x03, mmp_timer_base + TMR_CER);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int timer_set_shutdown(struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/* disable the matching interrupt */
+	__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static struct clock_event_device ckevt = {
+	.name			= "clockevent",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_next_event		= timer_set_next_event,
+	.set_state_shutdown	= timer_set_shutdown,
+	.set_state_oneshot	= timer_set_shutdown,
+};
+
+static u64 clksrc_read(struct clocksource *cs)
+{
+	return timer_read();
+}
+
+static struct clocksource cksrc = {
+	.name		= "clocksource",
+	.rating		= 200,
+	.read		= clksrc_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init timer_config(void)
+{
+	uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR);
+
+	__raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
+
+	ccr &= (cpu_is_mmp2() || cpu_is_mmp3()) ?
+		(TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
+		(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
+	__raw_writel(ccr, mmp_timer_base + TMR_CCR);
+
+	/* set timer 0 to periodic mode, and timer 1 to free-running mode */
+	__raw_writel(0x2, mmp_timer_base + TMR_CMR);
+
+	__raw_writel(0x1, mmp_timer_base + TMR_PLCR(0)); /* periodic */
+	__raw_writel(0x7, mmp_timer_base + TMR_ICR(0));  /* clear status */
+	__raw_writel(0x0, mmp_timer_base + TMR_IER(0));
+
+	__raw_writel(0x0, mmp_timer_base + TMR_PLCR(1)); /* free-running */
+	__raw_writel(0x7, mmp_timer_base + TMR_ICR(1));  /* clear status */
+	__raw_writel(0x0, mmp_timer_base + TMR_IER(1));
+
+	/* enable timer 1 counter */
+	__raw_writel(0x2, mmp_timer_base + TMR_CER);
+}
+
+static void __init mmp_timer_init(int irq, unsigned long rate)
+{
+	timer_config();
+
+	sched_clock_register(mmp_read_sched_clock, 32, rate);
+
+	ckevt.cpumask = cpumask_of(0);
+
+	if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"timer", &ckevt))
+		pr_err("Failed to request irq %d (timer)\n", irq);
+
+	clocksource_register_hz(&cksrc, rate);
+	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
+}
+
+static int __init mmp_dt_init_timer(struct device_node *np)
+{
+	struct clk *clk;
+	int irq, ret;
+	unsigned long rate;
+
+	clk = of_clk_get(np, 0);
+	if (!IS_ERR(clk)) {
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			return ret;
+		rate = clk_get_rate(clk);
+	} else if (cpu_is_pj4()) {
+		rate = 6500000;
+	} else {
+		rate = 3250000;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq)
+		return -EINVAL;
+
+	mmp_timer_base = of_iomap(np, 0);
+	if (!mmp_timer_base)
+		return -ENOMEM;
+
+	mmp_timer_init(irq, rate);
+	return 0;
+}
+
+TIMER_OF_DECLARE(mmp_timer, "mrvl,mmp-timer", mmp_dt_init_timer);