Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 153 insertions, 0 deletions

diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
new file mode 100644
index 0000000000..fa9709f30b
--- /dev/null
+++ b/arch/arm/mach-mstar/Kconfig
@@ -0,0 +1,23 @@
+menuconfig ARCH_MSTARV7
+	bool "MStar/Sigmastar Armv7 SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_ERRATA_814220
+	select ARM_GIC
+	select ARM_HEAVY_MB
+	select HAVE_ARM_ARCH_TIMER
+	select MST_IRQ
+	select MSTAR_MSC313_MPLL
+	help
+	  Support for newer MStar/Sigmastar SoC families that are
+	  based on Armv7 cores like the Cortex A7 and share the same
+	  basic hardware like the infinity and mercury series.
+
+if ARCH_MSTARV7
+
+config MACH_INFINITY
+	bool "MStar/Sigmastar infinity SoC support"
+	default ARCH_MSTARV7
+	help
+	  Support for MStar/Sigmastar infinity IP camera SoCs.
+
+endif
diff --git a/arch/arm/mach-mstar/Makefile b/arch/arm/mach-mstar/Makefile
new file mode 100644
index 0000000000..93b0391ede
--- /dev/null
+++ b/arch/arm/mach-mstar/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_MSTARV7) += mstarv7.o
diff --git a/arch/arm/mach-mstar/mstarv7.c b/arch/arm/mach-mstar/mstarv7.c
new file mode 100644
index 0000000000..274c4f0df2
--- /dev/null
+++ b/arch/arm/mach-mstar/mstarv7.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree support for MStar/Sigmastar Armv7 SoCs
+ *
+ * Copyright (c) 2020 thingy.jp
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <linux/init.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+/*
+ * In the u-boot code the area these registers are in is
+ * called "L3 bridge" and there are register descriptions
+ * for something in the same area called "AXI".
+ *
+ * It's not exactly known what this is but the vendor code
+ * for both u-boot and linux share calls to "flush the miu pipe".
+ * This seems to be to force pending CPU writes to memory so that
+ * the state is right before DMA capable devices try to read
+ * descriptors and data the CPU has prepared. Without doing this
+ * ethernet doesn't work reliably for example.
+ */
+
+#define MSTARV7_L3BRIDGE_FLUSH		0x14
+#define MSTARV7_L3BRIDGE_STATUS		0x40
+#define MSTARV7_L3BRIDGE_FLUSH_TRIGGER	BIT(0)
+#define MSTARV7_L3BRIDGE_STATUS_DONE	BIT(12)
+
+#ifdef CONFIG_SMP
+#define MSTARV7_CPU1_BOOT_ADDR_HIGH	0x4c
+#define MSTARV7_CPU1_BOOT_ADDR_LOW	0x50
+#define MSTARV7_CPU1_UNLOCK		0x58
+#define MSTARV7_CPU1_UNLOCK_MAGIC	0xbabe
+#endif
+
+static void __iomem *l3bridge;
+
+static const char * const mstarv7_board_dt_compat[] __initconst = {
+	"mstar,infinity",
+	"mstar,infinity2m",
+	"mstar,infinity3",
+	"mstar,mercury5",
+	NULL,
+};
+
+/*
+ * This may need locking to deal with situations where an interrupt
+ * happens while we are in here and mb() gets called by the interrupt handler.
+ *
+ * The vendor code did have a spin lock but it doesn't seem to be needed and
+ * removing it hasn't caused any side effects so far.
+ *
+ * [writel|readl]_relaxed have to be used here because otherwise
+ * we'd end up right back in here.
+ */
+static void mstarv7_mb(void)
+{
+	/* toggle the flush miu pipe fire bit */
+	writel_relaxed(0, l3bridge + MSTARV7_L3BRIDGE_FLUSH);
+	writel_relaxed(MSTARV7_L3BRIDGE_FLUSH_TRIGGER, l3bridge
+			+ MSTARV7_L3BRIDGE_FLUSH);
+	while (!(readl_relaxed(l3bridge + MSTARV7_L3BRIDGE_STATUS)
+			& MSTARV7_L3BRIDGE_STATUS_DONE)) {
+		/* wait for flush to complete */
+	}
+}
+
+#ifdef CONFIG_SMP
+static int mstarv7_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	struct device_node *np;
+	u32 bootaddr = (u32) __pa_symbol(secondary_startup_arm);
+	void __iomem *smpctrl;
+
+	/*
+	 * right now we don't know how to boot anything except
+	 * cpu 1.
+	 */
+	if (cpu != 1)
+		return -EINVAL;
+
+	np = of_find_compatible_node(NULL, NULL, "mstar,smpctrl");
+	smpctrl = of_iomap(np, 0);
+
+	if (!smpctrl)
+		return -ENODEV;
+
+	/* set the boot address for the second cpu */
+	writew(bootaddr & 0xffff, smpctrl + MSTARV7_CPU1_BOOT_ADDR_LOW);
+	writew((bootaddr >> 16) & 0xffff, smpctrl + MSTARV7_CPU1_BOOT_ADDR_HIGH);
+
+	/* unlock the second cpu */
+	writew(MSTARV7_CPU1_UNLOCK_MAGIC, smpctrl + MSTARV7_CPU1_UNLOCK);
+
+	/* and away we go...*/
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	iounmap(smpctrl);
+
+	return 0;
+}
+
+static const struct smp_operations __initdata mstarv7_smp_ops = {
+	.smp_boot_secondary = mstarv7_boot_secondary,
+};
+#endif
+
+static void __init mstarv7_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "mstar,l3bridge");
+	l3bridge = of_iomap(np, 0);
+	if (l3bridge)
+		soc_mb = mstarv7_mb;
+	else
+		pr_warn("Failed to install memory barrier, DMA will be broken!\n");
+}
+
+DT_MACHINE_START(MSTARV7_DT, "MStar/Sigmastar Armv7 (Device Tree)")
+	.dt_compat	= mstarv7_board_dt_compat,
+	.init_machine	= mstarv7_init,
+	.smp		= smp_ops(mstarv7_smp_ops),
+MACHINE_END