Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 855 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
new file mode 100644
index 0000000000..67de96c771
--- /dev/null
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-omap1/board-ams-delta.c
+ *
+ * Modified from board-generic.c
+ *
+ * Board specific inits for the Amstrad E3 (codename Delta) videophone
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ */
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/mtd/nand-gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_8250.h>
+#include <linux/export.h>
+#include <linux/omapfb.h>
+#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-mux.h>
+
+#include <asm/serial.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/keypad-omap.h>
+
+#include "hardware.h"
+#include "usb.h"
+#include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
+#include "iomap.h"
+#include "common.h"
+
+static const unsigned int ams_delta_keymap[] = {
+	KEY(0, 0, KEY_F1),		/* Advert    */
+
+	KEY(0, 3, KEY_COFFEE),		/* Games     */
+	KEY(0, 2, KEY_QUESTION),	/* Directory */
+	KEY(2, 3, KEY_CONNECT),		/* Internet  */
+	KEY(1, 2, KEY_SHOP),		/* Services  */
+	KEY(1, 1, KEY_PHONE),		/* VoiceMail */
+
+	KEY(0, 1, KEY_DELETE),		/* Delete    */
+	KEY(2, 2, KEY_PLAY),		/* Play      */
+	KEY(1, 0, KEY_PAGEUP),		/* Up        */
+	KEY(1, 3, KEY_PAGEDOWN),	/* Down      */
+	KEY(2, 0, KEY_EMAIL),		/* ReadEmail */
+	KEY(2, 1, KEY_STOP),		/* Stop      */
+
+	/* Numeric keypad portion */
+	KEY(0, 7, KEY_KP1),
+	KEY(0, 6, KEY_KP2),
+	KEY(0, 5, KEY_KP3),
+	KEY(1, 7, KEY_KP4),
+	KEY(1, 6, KEY_KP5),
+	KEY(1, 5, KEY_KP6),
+	KEY(2, 7, KEY_KP7),
+	KEY(2, 6, KEY_KP8),
+	KEY(2, 5, KEY_KP9),
+	KEY(3, 6, KEY_KP0),
+	KEY(3, 7, KEY_KPASTERISK),
+	KEY(3, 5, KEY_KPDOT),		/* # key     */
+	KEY(7, 2, KEY_NUMLOCK),		/* Mute      */
+	KEY(7, 1, KEY_KPMINUS),		/* Recall    */
+	KEY(6, 1, KEY_KPPLUS),		/* Redial    */
+	KEY(7, 6, KEY_KPSLASH),		/* Handsfree */
+	KEY(6, 0, KEY_ENTER),		/* Video     */
+
+	KEY(7, 4, KEY_CAMERA),		/* Photo     */
+
+	KEY(0, 4, KEY_F2),		/* Home      */
+	KEY(1, 4, KEY_F3),		/* Office    */
+	KEY(2, 4, KEY_F4),		/* Mobile    */
+	KEY(7, 7, KEY_F5),		/* SMS       */
+	KEY(7, 5, KEY_F6),		/* Email     */
+
+	/* QWERTY portion of keypad */
+	KEY(3, 4, KEY_Q),
+	KEY(3, 3, KEY_W),
+	KEY(3, 2, KEY_E),
+	KEY(3, 1, KEY_R),
+	KEY(3, 0, KEY_T),
+	KEY(4, 7, KEY_Y),
+	KEY(4, 6, KEY_U),
+	KEY(4, 5, KEY_I),
+	KEY(4, 4, KEY_O),
+	KEY(4, 3, KEY_P),
+
+	KEY(4, 2, KEY_A),
+	KEY(4, 1, KEY_S),
+	KEY(4, 0, KEY_D),
+	KEY(5, 7, KEY_F),
+	KEY(5, 6, KEY_G),
+	KEY(5, 5, KEY_H),
+	KEY(5, 4, KEY_J),
+	KEY(5, 3, KEY_K),
+	KEY(5, 2, KEY_L),
+
+	KEY(5, 1, KEY_Z),
+	KEY(5, 0, KEY_X),
+	KEY(6, 7, KEY_C),
+	KEY(6, 6, KEY_V),
+	KEY(6, 5, KEY_B),
+	KEY(6, 4, KEY_N),
+	KEY(6, 3, KEY_M),
+	KEY(6, 2, KEY_SPACE),
+
+	KEY(7, 0, KEY_LEFTSHIFT),	/* Vol up    */
+	KEY(7, 3, KEY_LEFTCTRL),	/* Vol down  */
+};
+
+#define LATCH1_PHYS	0x01000000
+#define LATCH1_VIRT	0xEA000000
+#define MODEM_PHYS	0x04000000
+#define MODEM_VIRT	0xEB000000
+#define LATCH2_PHYS	0x08000000
+#define LATCH2_VIRT	0xEC000000
+
+static struct map_desc ams_delta_io_desc[] __initdata = {
+	/* AMS_DELTA_LATCH1 */
+	{
+		.virtual	= LATCH1_VIRT,
+		.pfn		= __phys_to_pfn(LATCH1_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	},
+	/* AMS_DELTA_LATCH2 */
+	{
+		.virtual	= LATCH2_VIRT,
+		.pfn		= __phys_to_pfn(LATCH2_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	},
+	/* AMS_DELTA_MODEM */
+	{
+		.virtual	= MODEM_VIRT,
+		.pfn		= __phys_to_pfn(MODEM_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	}
+};
+
+static const struct omap_lcd_config ams_delta_lcd_config __initconst = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_usb_config ams_delta_usb_config __initdata = {
+	.register_host	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 2,
+};
+
+#define LATCH1_NGPIO		8
+
+static struct resource latch1_resources[] = {
+	[0] = {
+		.name	= "dat",
+		.start	= LATCH1_PHYS,
+		.end	= LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+#define LATCH1_LABEL	"latch1"
+
+static struct bgpio_pdata latch1_pdata = {
+	.label	= LATCH1_LABEL,
+	.base	= -1,
+	.ngpio	= LATCH1_NGPIO,
+};
+
+static struct platform_device latch1_gpio_device = {
+	.name		= "basic-mmio-gpio",
+	.id		= 0,
+	.resource	= latch1_resources,
+	.num_resources	= ARRAY_SIZE(latch1_resources),
+	.dev		= {
+		.platform_data	= &latch1_pdata,
+	},
+};
+
+#define LATCH1_PIN_LED_CAMERA		0
+#define LATCH1_PIN_LED_ADVERT		1
+#define LATCH1_PIN_LED_MAIL		2
+#define LATCH1_PIN_LED_HANDSFREE	3
+#define LATCH1_PIN_LED_VOICEMAIL	4
+#define LATCH1_PIN_LED_VOICE		5
+#define LATCH1_PIN_DOCKIT1		6
+#define LATCH1_PIN_DOCKIT2		7
+
+#define LATCH2_NGPIO			16
+
+static struct resource latch2_resources[] = {
+	[0] = {
+		.name	= "dat",
+		.start	= LATCH2_PHYS,
+		.end	= LATCH2_PHYS + (LATCH2_NGPIO - 1) / 8,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+#define LATCH2_LABEL	"latch2"
+
+static struct bgpio_pdata latch2_pdata = {
+	.label	= LATCH2_LABEL,
+	.base	= -1,
+	.ngpio	= LATCH2_NGPIO,
+};
+
+static struct platform_device latch2_gpio_device = {
+	.name		= "basic-mmio-gpio",
+	.id		= 1,
+	.resource	= latch2_resources,
+	.num_resources	= ARRAY_SIZE(latch2_resources),
+	.dev		= {
+		.platform_data	= &latch2_pdata,
+	},
+};
+
+#define LATCH2_PIN_LCD_VBLEN		0
+#define LATCH2_PIN_LCD_NDISP		1
+#define LATCH2_PIN_NAND_NCE		2
+#define LATCH2_PIN_NAND_NRE		3
+#define LATCH2_PIN_NAND_NWP		4
+#define LATCH2_PIN_NAND_NWE		5
+#define LATCH2_PIN_NAND_ALE		6
+#define LATCH2_PIN_NAND_CLE		7
+#define LATCH2_PIN_KEYBRD_PWR		8
+#define LATCH2_PIN_KEYBRD_DATAOUT	9
+#define LATCH2_PIN_SCARD_RSTIN		10
+#define LATCH2_PIN_SCARD_CMDVCC		11
+#define LATCH2_PIN_MODEM_NRESET		12
+#define LATCH2_PIN_MODEM_CODEC		13
+#define LATCH2_PIN_HANDSFREE_MUTE	14
+#define LATCH2_PIN_HANDSET_MUTE		15
+
+static struct regulator_consumer_supply modem_nreset_consumers[] = {
+	REGULATOR_SUPPLY("RESET#", "serial8250.1"),
+	REGULATOR_SUPPLY("POR", "cx20442-codec"),
+};
+
+static struct regulator_init_data modem_nreset_data = {
+	.constraints		= {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+		.boot_on		= 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(modem_nreset_consumers),
+	.consumer_supplies	= modem_nreset_consumers,
+};
+
+static struct fixed_voltage_config modem_nreset_config = {
+	.supply_name		= "modem_nreset",
+	.microvolts		= 3300000,
+	.startup_delay		= 25000,
+	.enabled_at_boot	= 1,
+	.init_data		= &modem_nreset_data,
+};
+
+static struct platform_device modem_nreset_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &modem_nreset_config,
+	},
+};
+
+static struct gpiod_lookup_table ams_delta_nreset_gpiod_table = {
+	.dev_id = "reg-fixed-voltage",
+	.table = {
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_NRESET,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+struct modem_private_data {
+	struct regulator *regulator;
+};
+
+static struct modem_private_data modem_priv;
+
+/*
+ * Define partitions for flash device
+ */
+
+static struct mtd_partition partition_info[] = {
+	{ .name		= "Kernel",
+	  .offset	= 0,
+	  .size		= 3 * SZ_1M + SZ_512K },
+	{ .name		= "u-boot",
+	  .offset	= 3 * SZ_1M + SZ_512K,
+	  .size		= SZ_256K },
+	{ .name		= "u-boot params",
+	  .offset	= 3 * SZ_1M + SZ_512K + SZ_256K,
+	  .size		= SZ_256K },
+	{ .name		= "Amstrad LDR",
+	  .offset	= 4 * SZ_1M,
+	  .size		= SZ_256K },
+	{ .name		= "File system",
+	  .offset	= 4 * SZ_1M + 1 * SZ_256K,
+	  .size		= 27 * SZ_1M },
+	{ .name		= "PBL reserved",
+	  .offset	= 32 * SZ_1M - 3 * SZ_256K,
+	  .size		=  3 * SZ_256K },
+};
+
+static struct gpio_nand_platdata nand_platdata = {
+	.parts		= partition_info,
+	.num_parts	= ARRAY_SIZE(partition_info),
+};
+
+static struct platform_device ams_delta_nand_device = {
+	.name	= "ams-delta-nand",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &nand_platdata,
+	},
+};
+
+#define OMAP_GPIO_LABEL		"gpio-0-15"
+#define OMAP_MPUIO_LABEL	"mpuio"
+
+static struct gpiod_lookup_table ams_delta_nand_gpio_table = {
+	.table = {
+		GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_NAND_RB, "rdy",
+			    0),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NCE, "nce",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NRE, "nre",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWP, "nwp",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0),
+		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 0, "data", 0, 0),
+		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 1, "data", 1, 0),
+		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 2, "data", 2, 0),
+		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 3, "data", 3, 0),
+		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 4, "data", 4, 0),
+		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 5, "data", 5, 0),
+		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 6, "data", 6, 0),
+		GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 7, "data", 7, 0),
+		{ },
+	},
+};
+
+static struct resource ams_delta_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data ams_delta_keymap_data = {
+	.keymap		= ams_delta_keymap,
+	.keymap_size	= ARRAY_SIZE(ams_delta_keymap),
+};
+
+static struct omap_kp_platform_data ams_delta_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &ams_delta_keymap_data,
+	.delay		= 9,
+};
+
+static struct platform_device ams_delta_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &ams_delta_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(ams_delta_kp_resources),
+	.resource	= ams_delta_kp_resources,
+};
+
+static struct platform_device ams_delta_lcd_device = {
+	.name	= "lcd_ams_delta",
+	.id	= -1,
+};
+
+static struct gpiod_lookup_table ams_delta_lcd_gpio_table = {
+	.table = {
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_LCD_VBLEN, "vblen", 0),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_LCD_NDISP, "ndisp", 0),
+		{ },
+	},
+};
+
+static struct gpio_led gpio_leds[] __initdata = {
+	[LATCH1_PIN_LED_CAMERA] = {
+		.name		 = "camera",
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	[LATCH1_PIN_LED_ADVERT] = {
+		.name		 = "advert",
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	[LATCH1_PIN_LED_MAIL] = {
+		.name		 = "email",
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	[LATCH1_PIN_LED_HANDSFREE] = {
+		.name		 = "handsfree",
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	[LATCH1_PIN_LED_VOICEMAIL] = {
+		.name		 = "voicemail",
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	[LATCH1_PIN_LED_VOICE] = {
+		.name		 = "voice",
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+};
+
+static const struct gpio_led_platform_data leds_pdata __initconst = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct gpiod_lookup_table leds_gpio_table = {
+	.table = {
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_CAMERA, NULL,
+				LATCH1_PIN_LED_CAMERA, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_ADVERT, NULL,
+				LATCH1_PIN_LED_ADVERT, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_MAIL, NULL,
+				LATCH1_PIN_LED_MAIL, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_HANDSFREE, NULL,
+				LATCH1_PIN_LED_HANDSFREE, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICEMAIL, NULL,
+				LATCH1_PIN_LED_VOICEMAIL, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICE, NULL,
+				LATCH1_PIN_LED_VOICE, 0),
+		{ },
+	},
+};
+
+static struct platform_device ams_delta_audio_device = {
+	.name   = "ams-delta-audio",
+	.id     = -1,
+};
+
+static struct gpiod_lookup_table ams_delta_audio_gpio_table = {
+	.table = {
+		GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_HOOK_SWITCH,
+			    "hook_switch", 0),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_CODEC,
+			    "modem_codec", 0),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_HANDSFREE_MUTE,
+			    "handsfree_mute", 0),
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_HANDSET_MUTE,
+			    "handset_mute", 0),
+		{ },
+	},
+};
+
+static struct platform_device cx20442_codec_device = {
+	.name   = "cx20442-codec",
+	.id     = -1,
+};
+
+static struct resource ams_delta_serio_resources[] = {
+	{
+		.flags	= IORESOURCE_IRQ,
+		/*
+		 * Initialize IRQ resource with invalid IRQ number.
+		 * It will be replaced with dynamically allocated GPIO IRQ
+		 * obtained from GPIO chip as soon as the chip is available.
+		 */
+		.start	= -EINVAL,
+		.end	= -EINVAL,
+	},
+};
+
+static struct platform_device ams_delta_serio_device = {
+	.name		= "ams-delta-serio",
+	.id		= PLATFORM_DEVID_NONE,
+	.dev		= {
+		/*
+		 * Initialize .platform_data explicitly with NULL to
+		 * indicate it is going to be used.  It will be replaced
+		 * with FIQ buffer address as soon as FIQ is initialized.
+		 */
+		.platform_data = NULL,
+	},
+	.num_resources	= ARRAY_SIZE(ams_delta_serio_resources),
+	.resource	= ams_delta_serio_resources,
+};
+
+static struct regulator_consumer_supply keybrd_pwr_consumers[] = {
+	/*
+	 * Initialize supply .dev_name with NULL.  It will be replaced
+	 * with serio dev_name() as soon as the serio device is registered.
+	 */
+	REGULATOR_SUPPLY("vcc", NULL),
+};
+
+static struct regulator_init_data keybrd_pwr_initdata = {
+	.constraints		= {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(keybrd_pwr_consumers),
+	.consumer_supplies	= keybrd_pwr_consumers,
+};
+
+static struct fixed_voltage_config keybrd_pwr_config = {
+	.supply_name		= "keybrd_pwr",
+	.microvolts		= 5000000,
+	.init_data		= &keybrd_pwr_initdata,
+};
+
+static struct platform_device keybrd_pwr_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= PLATFORM_DEVID_AUTO,
+	.dev	= {
+		.platform_data	= &keybrd_pwr_config,
+	},
+};
+
+static struct gpiod_lookup_table keybrd_pwr_gpio_table = {
+	.table = {
+		GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, NULL,
+			    GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct platform_device *ams_delta_devices[] __initdata = {
+	&latch1_gpio_device,
+	&latch2_gpio_device,
+	&ams_delta_kp_device,
+	&ams_delta_audio_device,
+	&ams_delta_serio_device,
+	&ams_delta_nand_device,
+	&ams_delta_lcd_device,
+	&cx20442_codec_device,
+	&modem_nreset_device,
+};
+
+static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
+	&ams_delta_nreset_gpiod_table,
+	&ams_delta_audio_gpio_table,
+	&keybrd_pwr_gpio_table,
+	&ams_delta_lcd_gpio_table,
+	&ams_delta_nand_gpio_table,
+};
+
+/*
+ * Some drivers may not use GPIO lookup tables but need to be provided
+ * with GPIO numbers.  The same applies to GPIO based IRQ lines - some
+ * drivers may even not use GPIO layer but expect just IRQ numbers.
+ * We could either define GPIO lookup tables then use them on behalf
+ * of those devices, or we can use GPIO driver level methods for
+ * identification of GPIO and IRQ numbers. For the purpose of the latter,
+ * defina a helper function which identifies GPIO chips by their labels.
+ */
+static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
+{
+	char *label = data;
+
+	return !strcmp(label, chip->label);
+}
+
+static struct gpiod_hog ams_delta_gpio_hogs[] = {
+	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
+		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
+	{},
+};
+
+static struct plat_serial8250_port ams_delta_modem_ports[];
+
+/*
+ * Obtain MODEM IRQ GPIO descriptor using its hardware pin
+ * number and assign related IRQ number to the MODEM port.
+ * Keep the GPIO descriptor open so nobody steps in.
+ */
+static void __init modem_assign_irq(struct gpio_chip *chip)
+{
+	struct gpio_desc *gpiod;
+
+	gpiod = gpiochip_request_own_desc(chip, AMS_DELTA_GPIO_PIN_MODEM_IRQ,
+					  "modem_irq", GPIO_ACTIVE_HIGH,
+					  GPIOD_IN);
+	if (IS_ERR(gpiod)) {
+		pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__,
+		       PTR_ERR(gpiod));
+	} else {
+		ams_delta_modem_ports[0].irq = gpiod_to_irq(gpiod);
+	}
+}
+
+/*
+ * The purpose of this function is to take care of proper initialization of
+ * devices and data structures which depend on GPIO lines provided by OMAP GPIO
+ * banks but their drivers don't use GPIO lookup tables or GPIO layer at all.
+ * The function may be called as soon as OMAP GPIO devices are probed.
+ * Since that happens at postcore_initcall, it can be called successfully
+ * from init_machine or later.
+ * Dependent devices may be registered from within this function or later.
+ */
+static void __init omap_gpio_deps_init(void)
+{
+	struct gpio_chip *chip;
+
+	chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label);
+	if (!chip) {
+		pr_err("%s: OMAP GPIO chip not found\n", __func__);
+		return;
+	}
+
+	/*
+	 * Start with FIQ initialization as it may have to request
+	 * and release successfully each OMAP GPIO pin in turn.
+	 */
+	ams_delta_init_fiq(chip, &ams_delta_serio_device);
+
+	modem_assign_irq(chip);
+}
+
+/*
+ * Initialize latch2 pins with values which are safe for dependent on-board
+ * devices or useful for their successull initialization even before GPIO
+ * driver takes control over the latch pins:
+ * - LATCH2_PIN_LCD_VBLEN	= 0
+ * - LATCH2_PIN_LCD_NDISP	= 0	Keep LCD device powered off before its
+ *					driver takes control over it.
+ * - LATCH2_PIN_NAND_NCE	= 0
+ * - LATCH2_PIN_NAND_NWP	= 0	Keep NAND device down and write-
+ *					protected before its driver takes
+ *					control over it.
+ * - LATCH2_PIN_KEYBRD_PWR	= 0	Keep keyboard powered off before serio
+ *					driver takes control over it.
+ * - LATCH2_PIN_KEYBRD_DATAOUT	= 0	Keep low to avoid corruption of first
+ *					byte of data received from attached
+ *					keyboard when serio device is probed;
+ *					the pin is also hogged low by the latch2
+ *					GPIO driver as soon as it is ready.
+ * - LATCH2_PIN_MODEM_NRESET	= 1	Enable voice MODEM device, allowing for
+ *					its successful probe even before a
+ *					regulator it depends on, which in turn
+ *					takes control over the pin, is set up.
+ * - LATCH2_PIN_MODEM_CODEC	= 1	Attach voice MODEM CODEC data port
+ *					to the MODEM so the CODEC is under
+ *					control even if audio driver doesn't
+ *					take it over.
+ */
+static void __init ams_delta_latch2_init(void)
+{
+	u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC;
+
+	__raw_writew(latch2, IOMEM(LATCH2_VIRT));
+}
+
+static void __init ams_delta_init(void)
+{
+	struct platform_device *leds_pdev;
+
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+
+	/* parallel camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J18_1610_CAM_D7);
+
+	omap_gpio_deps_init();
+	ams_delta_latch2_init();
+	gpiod_add_hogs(ams_delta_gpio_hogs);
+
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omap1_usb_init(&ams_delta_usb_config);
+	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+	/*
+	 * As soon as regulator consumers have been registered, assign their
+	 * dev_names to consumer supply entries of respective regulators.
+	 */
+	keybrd_pwr_consumers[0].dev_name =
+			dev_name(&ams_delta_serio_device.dev);
+
+	/*
+	 * Once consumer supply entries are populated with dev_names,
+	 * register regulator devices.  At this stage only the keyboard
+	 * power regulator has its consumer supply table fully populated.
+	 */
+	platform_device_register(&keybrd_pwr_device);
+
+	/*
+	 * As soon as GPIO consumers have been registered, assign
+	 * their dev_names to respective GPIO lookup tables.
+	 */
+	ams_delta_audio_gpio_table.dev_id =
+			dev_name(&ams_delta_audio_device.dev);
+	keybrd_pwr_gpio_table.dev_id = dev_name(&keybrd_pwr_device.dev);
+	ams_delta_nand_gpio_table.dev_id = dev_name(&ams_delta_nand_device.dev);
+	ams_delta_lcd_gpio_table.dev_id = dev_name(&ams_delta_lcd_device.dev);
+
+	/*
+	 * Once GPIO lookup tables are populated with dev_names, register them.
+	 */
+	gpiod_add_lookup_tables(ams_delta_gpio_tables,
+				ARRAY_SIZE(ams_delta_gpio_tables));
+
+	leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
+	if (!IS_ERR_OR_NULL(leds_pdev)) {
+		leds_gpio_table.dev_id = dev_name(&leds_pdev->dev);
+		gpiod_add_lookup_table(&leds_gpio_table);
+	}
+
+	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
+
+	omapfb_set_lcd_config(&ams_delta_lcd_config);
+}
+
+static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
+{
+	struct modem_private_data *priv = port->private_data;
+	int ret;
+
+	if (!priv)
+		return;
+
+	if (IS_ERR(priv->regulator))
+		return;
+
+	if (state == old)
+		return;
+
+	if (state == 0)
+		ret = regulator_enable(priv->regulator);
+	else if (old == 0)
+		ret = regulator_disable(priv->regulator);
+	else
+		ret = 0;
+
+	if (ret)
+		dev_warn(port->dev,
+			 "ams_delta modem_pm: failed to %sable regulator: %d\n",
+			 state ? "dis" : "en", ret);
+}
+
+static struct plat_serial8250_port ams_delta_modem_ports[] = {
+	{
+		.membase	= IOMEM(MODEM_VIRT),
+		.mapbase	= MODEM_PHYS,
+		.irq		= IRQ_NOTCONNECTED, /* changed later */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= BASE_BAUD * 16,
+		.pm		= modem_pm,
+		.private_data	= &modem_priv,
+	},
+	{ },
+};
+
+static int ams_delta_modem_pm_activate(struct device *dev)
+{
+	modem_priv.regulator = regulator_get(dev, "RESET#");
+	if (IS_ERR(modem_priv.regulator))
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+
+static struct dev_pm_domain ams_delta_modem_pm_domain = {
+	.activate	= ams_delta_modem_pm_activate,
+};
+
+static struct platform_device ams_delta_modem_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data = ams_delta_modem_ports,
+		.pm_domain = &ams_delta_modem_pm_domain,
+	},
+};
+
+/*
+ * This function expects MODEM IRQ number already assigned to the port.
+ * The MODEM device requires its RESET# pin kept high during probe.
+ * That requirement can be fulfilled in several ways:
+ * - with a descriptor of already functional modem_nreset regulator
+ *   assigned to the MODEM private data,
+ * - with the regulator not yet controlled by modem_pm function but
+ *   already enabled by default on probe,
+ * - before the modem_nreset regulator is probed, with the pin already
+ *   set high explicitly.
+ * The last one is already guaranteed by ams_delta_latch2_init() called
+ * from machine_init.
+ * In order to avoid taking over ttyS0 device slot, the MODEM device
+ * should be registered after OMAP serial ports.  Since those ports
+ * are registered at arch_initcall, this function can be called safely
+ * at arch_initcall_sync earliest.
+ */
+static int __init ams_delta_modem_init(void)
+{
+	if (!machine_is_ams_delta())
+		return -ENODEV;
+
+	omap_cfg_reg(M14_1510_GPIO2);
+
+	/* Initialize the modem_nreset regulator consumer before use */
+	modem_priv.regulator = ERR_PTR(-ENODEV);
+
+	return platform_device_register(&ams_delta_modem_device);
+}
+arch_initcall_sync(ams_delta_modem_init);
+
+static void __init ams_delta_map_io(void)
+{
+	omap1_map_io();
+	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
+MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
+	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
+	.atag_offset	= 0x100,
+	.map_io		= ams_delta_map_io,
+	.init_early	= omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= ams_delta_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END