Adding upstream version 6.7.7.upstream/6.7.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 17 insertions, 24 deletions

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 67de96c771..0daf6c5b5c 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -561,22 +561,6 @@ static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
 	&ams_delta_nand_gpio_table,
 };
 
-/*
- * Some drivers may not use GPIO lookup tables but need to be provided
- * with GPIO numbers.  The same applies to GPIO based IRQ lines - some
- * drivers may even not use GPIO layer but expect just IRQ numbers.
- * We could either define GPIO lookup tables then use them on behalf
- * of those devices, or we can use GPIO driver level methods for
- * identification of GPIO and IRQ numbers. For the purpose of the latter,
- * defina a helper function which identifies GPIO chips by their labels.
- */
-static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
-{
-	char *label = data;
-
-	return !strcmp(label, chip->label);
-}
-
 static struct gpiod_hog ams_delta_gpio_hogs[] = {
 	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
 		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
@@ -616,14 +600,28 @@ static void __init modem_assign_irq(struct gpio_chip *chip)
  */
 static void __init omap_gpio_deps_init(void)
 {
+	struct gpio_device *gdev;
 	struct gpio_chip *chip;
 
-	chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label);
-	if (!chip) {
-		pr_err("%s: OMAP GPIO chip not found\n", __func__);
+	/*
+	 * Some drivers may not use GPIO lookup tables but need to be provided
+	 * with GPIO numbers. The same applies to GPIO based IRQ lines - some
+	 * drivers may even not use GPIO layer but expect just IRQ numbers.
+	 * We could either define GPIO lookup tables then use them on behalf
+	 * of those devices, or we can use GPIO driver level methods for
+	 * identification of GPIO and IRQ numbers.
+	 *
+	 * This reference will be leaked but that's alright as this device
+	 * never goes down.
+	 */
+	gdev = gpio_device_find_by_label(OMAP_GPIO_LABEL);
+	if (!gdev) {
+		pr_err("%s: OMAP GPIO device not found\n", __func__);
 		return;
 	}
 
+	chip = gpio_device_get_chip(gdev);
+
 	/*
 	 * Start with FIQ initialization as it may have to request
 	 * and release successfully each OMAP GPIO pin in turn.
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 7e061d671f..c917cb2c6e 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -51,11 +51,6 @@
 #define PALMTE_HDQ_GPIO		11
 #define PALMTE_HEADPHONES_GPIO	14
 #define PALMTE_SPEAKER_GPIO	15
-#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
 
 static const unsigned int palmte_keymap[] = {
 	KEY(0, 0, KEY_F1),		/* Calendar */