Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 174 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
new file mode 100644
index 0000000000..10e472f4fa
--- /dev/null
+++ b/arch/arm/mach-pxa/Kconfig
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_PXA
+	bool "PXA2xx/PXA3xx-based"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select ARM_CPU_SUSPEND if PM
+	select CLKSRC_PXA
+	select CLKSRC_MMIO
+	select TIMER_OF
+	select CPU_XSCALE if !CPU_XSC3
+	select GPIO_PXA
+	select GPIOLIB
+	select PLAT_PXA
+	help
+	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+
+if ARCH_PXA
+
+config MACH_PXA25X_DT
+	bool "Support PXA25x platforms from device tree"
+	select PINCTRL
+	select POWER_SUPPLY
+	select PXA25x
+	select USE_OF
+	help
+	  Include support for Marvell PXA25x based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA25x_DT is enabled.
+
+config MACH_PXA27X_DT
+	bool "Support PXA27x platforms from device tree"
+	select PINCTRL
+	select POWER_SUPPLY
+	select PXA27x
+	select USE_OF
+	help
+	  Include support for Marvell PXA27x based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA27X_DT is enabled.
+
+config MACH_PXA3XX_DT
+	bool "Support PXA3xx platforms from device tree"
+	select CPU_PXA300
+	select CPU_PXA310
+	select CPU_PXA320
+	select PINCTRL
+	select POWER_SUPPLY
+	select PXA3xx
+	select USE_OF
+	help
+	  Include support for Marvell PXA3xx based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA3XX_DT is enabled.
+
+if ATAGS
+
+comment "Legacy board files"
+
+config ARCH_GUMSTIX
+	bool "Gumstix XScale 255 boards"
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on
+	  Basix, Connex, ws-200ax, ws-400ax systems
+
+choice
+	prompt "Gumstix Carrier/Expansion Board"
+	depends on ARCH_GUMSTIX
+
+config GUMSTIX_AM200EPD
+	bool "Enable AM200EPD board support"
+
+config GUMSTIX_AM300EPD
+	bool "Enable AM300EPD board support"
+
+endchoice
+
+config PXA_SHARPSL
+	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+	select SHARP_PARAM
+	select SHARP_SCOOP
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
+	  handheld computer.
+
+config PXA_SHARPSL_DETECT_MACH_ID
+	bool "Detect machine ID at run-time in the decompressor"
+	depends on PXA_SHARPSL
+	help
+	  Say Y here if you want the zImage decompressor to detect
+	  the Zaurus machine ID at run-time. For latest kexec-based
+	  boot loader, this is not necessary.
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select I2C
+	select I2C_PXA
+	select MACH_SPITZ
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+endif # ATAGS
+
+config PXA25x
+	bool
+	select CPU_XSCALE
+	help
+	  Select code specific to PXA21x/25x/26x variants
+
+config PXA27x
+	bool
+	select CPU_XSCALE
+	help
+	  Select code specific to PXA27x variants
+
+config PXA3xx
+	bool
+	select CPU_XSC3
+	help
+	  Select code specific to PXA3xx variants
+
+config CPU_PXA300
+	bool
+	select PXA3xx
+	help
+	  PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+	bool
+	select CPU_PXA300
+	help
+	  PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+	bool
+	select PXA3xx
+	help
+	  PXA320 (codename Monahans-P)
+
+config PXA_SHARP_Cxx00
+	bool
+	select SHARPSL_PM
+	help
+	  Enable common support for Sharp Cxx00 models
+
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+	select SHARPSL_PM_MAX1111
+
+config SHARPSL_PM_MAX1111
+	bool
+	select HWMON
+	select SENSORS_MAX1111
+	select SPI
+	select SPI_MASTER
+
+endif