Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

20 files changed, 2395 insertions, 0 deletions

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
new file mode 100644
index 0000000000..7108ad628f
--- /dev/null
+++ b/arch/arm/mach-spear/Kconfig
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# SPEAr Platform configuration file
+#
+
+menuconfig PLAT_SPEAR
+	bool "ST SPEAr Family"
+	depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN)
+	select ARM_AMBA
+	select CLKSRC_MMIO
+	select GPIOLIB
+
+if PLAT_SPEAR
+
+config ARCH_SPEAR13XX
+	bool "ST SPEAr13xx"
+	depends on ARCH_MULTI_V7
+	select ARM_GIC
+	select GPIO_SPEAR_SPICS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select MFD_SYSCON
+	help
+	  Supports for ARM's SPEAR13XX family
+
+if ARCH_SPEAR13XX
+
+config MACH_SPEAR1310
+	bool "SPEAr1310 Machine support with Device Tree"
+	select PINCTRL_SPEAR1310
+	select PHY_ST_SPEAR1310_MIPHY
+	help
+	  Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+	bool "SPEAr1340 Machine support with Device Tree"
+	select PINCTRL_SPEAR1340
+	select PHY_ST_SPEAR1340_MIPHY
+	help
+	  Supports ST SPEAr1340 machine configured via the device-tree
+
+endif #ARCH_SPEAR13XX
+
+config ARCH_SPEAR3XX
+	bool "ST SPEAr3xx"
+	depends on ARCH_MULTI_V5
+	depends on !ARCH_SPEAR13XX
+	select ARM_VIC
+	select PINCTRL
+	help
+	  Supports for ARM's SPEAR3XX family
+
+if ARCH_SPEAR3XX
+
+config MACH_SPEAR300
+	bool "SPEAr300 Machine support with Device Tree"
+	select PINCTRL_SPEAR300
+	help
+	  Supports ST SPEAr300 machine configured via the device-tree
+
+config MACH_SPEAR310
+	bool "SPEAr310 Machine support with Device Tree"
+	select PINCTRL_SPEAR310
+	help
+	  Supports ST SPEAr310 machine configured via the device-tree
+
+config MACH_SPEAR320
+	bool "SPEAr320 Machine support with Device Tree"
+	select PINCTRL_SPEAR320
+	help
+	  Supports ST SPEAr320 machine configured via the device-tree
+
+endif
+
+config ARCH_SPEAR6XX
+	bool "ST SPEAr6XX"
+	depends on ARCH_MULTI_V5
+	depends on !ARCH_SPEAR13XX
+	select ARM_VIC
+	help
+	  Supports for ARM's SPEAR6XX family
+
+config ARCH_SPEAR_AUTO
+	bool
+	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
+	select ARCH_SPEAR3XX
+
+endif
+
diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile
new file mode 100644
index 0000000000..c6101a8436
--- /dev/null
+++ b/arch/arm/mach-spear/Makefile
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# SPEAr Platform specific Makefile
+#
+
+# Common support
+obj-y	:= restart.o time.o
+
+smp-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o $(smp-y)
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= pl080.o
+obj-$(CONFIG_MACH_SPEAR300)	+= spear300.o
+obj-$(CONFIG_MACH_SPEAR310)	+= spear310.o
+obj-$(CONFIG_MACH_SPEAR320)	+= spear320.o
+
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= spear6xx.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= pl080.o
+
+CFLAGS_hotplug.o		+= -march=armv7-a
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
new file mode 100644
index 0000000000..9e36920d4c
--- /dev/null
+++ b/arch/arm/mach-spear/generic.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * spear machine family generic header file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Rajeev Kumar <rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <linux/amba/pl08x.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/time.h>
+
+extern volatile int spear_pen_release;
+
+extern void spear13xx_timer_init(void);
+extern void spear3xx_timer_init(void);
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
+
+void __init spear_setup_of_timer(void);
+void __init spear3xx_map_io(void);
+void __init spear3xx_dt_init_irq(void);
+void __init spear13xx_map_io(void);
+void __init spear13xx_l2x0_init(void);
+
+void spear_restart(enum reboot_mode, const char *);
+
+void spear13xx_secondary_startup(void);
+void spear13xx_cpu_die(unsigned int cpu);
+
+extern const struct smp_operations spear13xx_smp_ops;
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S
new file mode 100644
index 0000000000..96f89436cc
--- /dev/null
+++ b/arch/arm/mach-spear/headsmp.S
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/mach-spear13XX/headsmp.S
+ *
+ * Picked from realview
+ * Copyright (c) 2012 ST Microelectronics Limited
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * spear13xx specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(spear13xx_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/* re-enable coherency */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #(1 << 6) | (1 << 0)
+	mcr	p15, 0, r0, c1, c0, 1
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+	.align
+1:	.long	.
+	.long	spear_pen_release
+ENDPROC(spear13xx_secondary_startup)
diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c
new file mode 100644
index 0000000000..82a83c3cff
--- /dev/null
+++ b/arch/arm/mach-spear/hotplug.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-spear13xx/hotplug.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * based upon linux/arch/arm/mach-realview/hotplug.c
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+#include "generic.h"
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	dsb\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	: "=&r" (v)
+	: "r" (0), "Ir" (CR_C)
+	: "cc", "memory");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile("mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	: "=&r" (v)
+	: "Ir" (CR_C)
+	: "cc");
+}
+
+static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
+{
+	for (;;) {
+		wfi();
+
+		if (spear_pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void spear13xx_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	spear13xx_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
diff --git a/arch/arm/mach-spear/misc_regs.h b/arch/arm/mach-spear/misc_regs.h
new file mode 100644
index 0000000000..72aa801a3a
--- /dev/null
+++ b/arch/arm/mach-spear/misc_regs.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Miscellaneous registers definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#ifndef __MACH_MISC_REGS_H
+#define __MACH_MISC_REGS_H
+
+#include "spear.h"
+
+#define MISC_BASE		(VA_SPEAR_ICM3_MISC_REG_BASE)
+#define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
+
+#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c
new file mode 100644
index 0000000000..47243a8153
--- /dev/null
+++ b/arch/arm/mach-spear/pl080.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/plat-spear/pl080.c
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/bus.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include "spear.h"
+#include "misc_regs.h"
+#include "pl080.h"
+
+static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
+
+struct {
+	unsigned char busy;
+	unsigned char val;
+} signals[16] = {{0, 0}, };
+
+int pl080_get_signal(const struct pl08x_channel_data *cd)
+{
+	unsigned int signal = cd->min_signal, val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* Return if signal is already acquired by somebody else */
+	if (signals[signal].busy &&
+			(signals[signal].val != cd->muxval)) {
+		spin_unlock_irqrestore(&lock, flags);
+		return -EBUSY;
+	}
+
+	/* If acquiring for the first time, configure it */
+	if (!signals[signal].busy) {
+		val = readl(DMA_CHN_CFG);
+
+		/*
+		 * Each request line has two bits in DMA_CHN_CFG register. To
+		 * goto the bits of current request line, do left shift of
+		 * value by 2 * signal number.
+		 */
+		val &= ~(0x3 << (signal * 2));
+		val |= cd->muxval << (signal * 2);
+		writel(val, DMA_CHN_CFG);
+	}
+
+	signals[signal].busy++;
+	signals[signal].val = cd->muxval;
+	spin_unlock_irqrestore(&lock, flags);
+
+	return signal;
+}
+
+void pl080_put_signal(const struct pl08x_channel_data *cd, int signal)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* if signal is not used */
+	if (!signals[signal].busy)
+		BUG();
+
+	signals[signal].busy--;
+
+	spin_unlock_irqrestore(&lock, flags);
+}
diff --git a/arch/arm/mach-spear/pl080.h b/arch/arm/mach-spear/pl080.h
new file mode 100644
index 0000000000..3732d940db
--- /dev/null
+++ b/arch/arm/mach-spear/pl080.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/plat-spear/include/plat/pl080.h
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#ifndef __PLAT_PL080_H
+#define __PLAT_PL080_H
+
+struct pl08x_channel_data;
+int pl080_get_signal(const struct pl08x_channel_data *cd);
+void pl080_put_signal(const struct pl08x_channel_data *cd, int signal);
+
+#endif /* __PLAT_PL080_H */
diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
new file mode 100644
index 0000000000..97fbda998d
--- /dev/null
+++ b/arch/arm/mach-spear/platsmp.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include "spear.h"
+#include "generic.h"
+
+/* XXX spear_pen_release is cargo culted code - DO NOT COPY XXX */
+volatile int spear_pen_release = -1;
+
+/*
+ * XXX CARGO CULTED CODE - DO NOT COPY XXX
+ *
+ * Write spear_pen_release in a way that is guaranteed to be visible to
+ * all observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void spear_write_pen_release(int val)
+{
+	spear_pen_release = val;
+	smp_wmb();
+	sync_cache_w(&spear_pen_release);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+
+static void spear13xx_secondary_init(unsigned int cpu)
+{
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	spear_write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting spear_pen_release.
+	 *
+	 * Note that "spear_pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	spear_write_pen_release(cpu);
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (spear_pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return spear_pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init spear13xx_smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+	scu_enable(scu_base);
+
+	/*
+	 * Write the address of secondary startup into the system-wide location
+	 * (presently it is in SRAM). The BootMonitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this address.
+	 */
+	__raw_writel(__pa_symbol(spear13xx_secondary_startup), SYS_LOCATION);
+}
+
+const struct smp_operations spear13xx_smp_ops __initconst = {
+       .smp_init_cpus		= spear13xx_smp_init_cpus,
+       .smp_prepare_cpus	= spear13xx_smp_prepare_cpus,
+       .smp_secondary_init	= spear13xx_secondary_init,
+       .smp_boot_secondary	= spear13xx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+       .cpu_die			= spear13xx_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-spear/restart.c b/arch/arm/mach-spear/restart.c
new file mode 100644
index 0000000000..76fb16cc81
--- /dev/null
+++ b/arch/arm/mach-spear/restart.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/plat-spear/restart.c
+ *
+ * SPEAr platform specific restart functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+#include <linux/io.h>
+#include <linux/amba/sp810.h>
+#include <linux/reboot.h>
+#include <asm/system_misc.h>
+#include "spear.h"
+#include "generic.h"
+
+#define SPEAR13XX_SYS_SW_RES			(VA_MISC_BASE + 0x204)
+void spear_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (mode == REBOOT_SOFT) {
+		/* software reset, Jump into ROM at address 0 */
+		soft_restart(0);
+	} else {
+		/* hardware reset, Use on-chip reset capability */
+#ifdef CONFIG_ARCH_SPEAR13XX
+		writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
+#endif
+#if defined(CONFIG_ARCH_SPEAR3XX) || defined(CONFIG_ARCH_SPEAR6XX)
+		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+#endif
+	}
+}
diff --git a/arch/arm/mach-spear/spear.h b/arch/arm/mach-spear/spear.h
new file mode 100644
index 0000000000..f23eaf1e52
--- /dev/null
+++ b/arch/arm/mach-spear/spear.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * SPEAr3xx/6xx Machine family specific definition
+ *
+ * Copyright (C) 2009,2012 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#ifndef __MACH_SPEAR_H
+#define __MACH_SPEAR_H
+
+#include <asm/page.h>
+
+#if defined(CONFIG_ARCH_SPEAR3XX) || defined (CONFIG_ARCH_SPEAR6XX)
+
+/* ICM1 - Low speed connection */
+#define SPEAR_ICM1_2_BASE		UL(0xD0000000)
+#define VA_SPEAR_ICM1_2_BASE		IOMEM(0xFD000000)
+#define SPEAR_ICM1_UART_BASE		UL(0xD0000000)
+#define VA_SPEAR_ICM1_UART_BASE		(VA_SPEAR_ICM1_2_BASE - SPEAR_ICM1_2_BASE + SPEAR_ICM1_UART_BASE)
+#define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
+
+/* ML-1, 2 - Multi Layer CPU Subsystem */
+#define SPEAR_ICM3_ML1_2_BASE		UL(0xF0000000)
+#define VA_SPEAR6XX_ML_CPU_BASE		IOMEM(0xF0000000)
+
+/* ICM3 - Basic Subsystem */
+#define SPEAR_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR_ICM3_SMI_CTRL_BASE	IOMEM(0xFC000000)
+#define SPEAR_ICM3_DMA_BASE		UL(0xFC400000)
+#define SPEAR_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
+#define VA_SPEAR_ICM3_SYS_CTRL_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_SYS_CTRL_BASE)
+#define SPEAR_ICM3_MISC_REG_BASE	UL(0xFCA80000)
+#define VA_SPEAR_ICM3_MISC_REG_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_MISC_REG_BASE)
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE		SPEAR_ICM1_UART_BASE
+
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE		SPEAR_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR_ICM3_SYS_CTRL_BASE
+#endif /* SPEAR3xx || SPEAR6XX */
+
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE	IOMEM(0xFE000000)
+
+#ifdef CONFIG_ARCH_SPEAR13XX
+
+#define PERIP_GRP2_BASE				UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE			IOMEM(0xF9000000)
+#define MCIF_SDHCI_BASE				UL(0xB3000000)
+#define SYSRAM0_BASE				UL(0xB3800000)
+#define VA_SYSRAM0_BASE				IOMEM(0xF9800000)
+#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE				UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE			IOMEM(0xFD000000)
+#define UART_BASE				UL(0xE0000000)
+#define VA_UART_BASE				IOMEM(0xFD000000)
+#define SSP_BASE				UL(0xE0100000)
+#define MISC_BASE				UL(0xE0700000)
+#define VA_MISC_BASE				IOMEM(0xFD700000)
+
+#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE			IOMEM(0xFC000000)
+
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE				UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE			IOMEM(0xFC800000)
+#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE				UL(0xED000000)
+#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
+
+/* others */
+#define MCIF_CF_BASE				UL(0xB2800000)
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE			UART_BASE
+
+#endif /* SPEAR13XX */
+
+#endif /* __MACH_SPEAR_H */
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
new file mode 100644
index 0000000000..89d388388e
--- /dev/null
+++ b/arch/arm/mach-spear/spear1310.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear13xx/spear1310.c
+ *
+ * SPEAr1310 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#define pr_fmt(fmt) "SPEAr1310: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/pata_arasan_cf_data.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "generic.h"
+#include "spear.h"
+
+/* Base addresses */
+#define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
+#define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
+
+static void __init spear1310_dt_init(void)
+{
+	platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
+}
+
+static const char * const spear1310_dt_board_compat[] = {
+	"st,spear1310",
+	"st,spear1310-evb",
+	NULL,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD8000000		0xFA000000
+ */
+static struct map_desc spear1310_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR1310_RAS_GRP1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init spear1310_map_io(void)
+{
+	iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
+	spear13xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+	.smp		=	smp_ops(spear13xx_smp_ops),
+	.map_io		=	spear1310_map_io,
+	.init_time	=	spear13xx_timer_init,
+	.init_machine	=	spear1310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
new file mode 100644
index 0000000000..70986ef6c8
--- /dev/null
+++ b/arch/arm/mach-spear/spear1340.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear13xx/spear1340.c
+ *
+ * SPEAr1340 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#define pr_fmt(fmt) "SPEAr1340: " fmt
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include "generic.h"
+
+static void __init spear1340_dt_init(void)
+{
+	platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
+}
+
+static const char * const spear1340_dt_board_compat[] = {
+	"st,spear1340",
+	"st,spear1340-evb",
+	NULL,
+};
+
+DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+	.smp		=	smp_ops(spear13xx_smp_ops),
+	.map_io		=	spear13xx_map_io,
+	.init_time	=	spear13xx_timer_init,
+	.init_machine	=	spear1340_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1340_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
new file mode 100644
index 0000000000..ac5b76bbea
--- /dev/null
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear13xx/spear13xx.c
+ *
+ * SPEAr13XX machines common source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#define pr_fmt(fmt) "SPEAr13xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/clk.h>
+#include <linux/clk/spear.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/map.h>
+#include "spear.h"
+#include "generic.h"
+
+void __init spear13xx_l2x0_init(void)
+{
+	/*
+	 * 512KB (64KB/way), 8-way associativity, parity supported
+	 *
+	 * FIXME: 9th bit, of Auxiliary Controller register must be set
+	 * for some spear13xx devices for stable L2 operation.
+	 *
+	 * Enable Early BRESP, L2 prefetch for Instruction and Data,
+	 * write alloc and 'Full line of zero' options
+	 *
+	 */
+	if (!IS_ENABLED(CONFIG_CACHE_L2X0))
+		return;
+
+	writel_relaxed(0x06, VA_L2CC_BASE + L310_PREFETCH_CTRL);
+
+	/*
+	 * Program following latencies in order to make
+	 * SPEAr1340 work at 600 MHz
+	 */
+	writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL);
+	l2x0_init(VA_L2CC_BASE, 0x30a00001, 0xfe0fffff);
+}
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xB3000000		0xF9000000
+ * 0xE0000000		0xFD000000
+ * 0xEC000000		0xFC000000
+ * 0xED000000		0xFB000000
+ */
+static struct map_desc spear13xx_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)VA_PERIP_GRP2_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_PERIP_GRP1_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_A9SM_AND_MPMC_BASE,
+		.pfn		= __phys_to_pfn(A9SM_AND_MPMC_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_L2CC_BASE,
+		.pfn		= __phys_to_pfn(L2CC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear13xx_map_io(void)
+{
+	iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc));
+}
+
+static void __init spear13xx_clk_init(void)
+{
+	if (of_machine_is_compatible("st,spear1310"))
+		spear1310_clk_init(VA_MISC_BASE, VA_SPEAR1310_RAS_BASE);
+	else if (of_machine_is_compatible("st,spear1340"))
+		spear1340_clk_init(VA_MISC_BASE);
+	else
+		pr_err("%s: Unknown machine\n", __func__);
+}
+
+void __init spear13xx_timer_init(void)
+{
+	char pclk_name[] = "osc_24m_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear13xx_clk_init();
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n", __func__,
+				pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_of_timer();
+	timer_probe();
+}
diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c
new file mode 100644
index 0000000000..1d6b6e10fc
--- /dev/null
+++ b/arch/arm/mach-spear/spear300.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear3xx/spear300.c
+ *
+ * SPEAr300 machine source file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#define pr_fmt(fmt) "SPEAr300: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include "generic.h"
+#include "spear.h"
+
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear300_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	},
+};
+
+/* Add SPEAr300 auxdata to pass platform data */
+static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
+
+static void __init spear300_dt_init(void)
+{
+	pl080_plat_data.slave_channels = spear300_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
+
+	of_platform_default_populate(NULL, spear300_auxdata_lookup, NULL);
+}
+
+static const char * const spear300_dt_board_compat[] = {
+	"st,spear300",
+	"st,spear300-evb",
+	NULL,
+};
+
+static void __init spear300_map_io(void)
+{
+	spear3xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
+	.map_io		=	spear300_map_io,
+	.init_time	=	spear3xx_timer_init,
+	.init_machine	=	spear300_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear300_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c
new file mode 100644
index 0000000000..da4643b9f3
--- /dev/null
+++ b/arch/arm/mach-spear/spear310.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear3xx/spear310.c
+ *
+ * SPEAr310 machine source file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#define pr_fmt(fmt) "SPEAr310: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include "generic.h"
+#include "spear.h"
+
+#define SPEAR310_UART1_BASE		UL(0xB2000000)
+#define SPEAR310_UART2_BASE		UL(0xB2080000)
+#define SPEAR310_UART3_BASE		UL(0xB2100000)
+#define SPEAR310_UART4_BASE		UL(0xB2180000)
+#define SPEAR310_UART5_BASE		UL(0xB2200000)
+
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear310_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	},
+};
+
+/* uart devices plat data */
+static struct amba_pl011_data spear310_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart3_tx",
+		.dma_rx_param = "uart3_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart4_tx",
+		.dma_rx_param = "uart4_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart5_tx",
+		.dma_rx_param = "uart5_rx",
+	},
+};
+
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
+			&spear310_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
+			&spear310_uart_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
+			&spear310_uart_data[2]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
+			&spear310_uart_data[3]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
+			&spear310_uart_data[4]),
+	{}
+};
+
+static void __init spear310_dt_init(void)
+{
+	pl080_plat_data.slave_channels = spear310_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
+
+	of_platform_default_populate(NULL, spear310_auxdata_lookup, NULL);
+}
+
+static const char * const spear310_dt_board_compat[] = {
+	"st,spear310",
+	"st,spear310-evb",
+	NULL,
+};
+
+static void __init spear310_map_io(void)
+{
+	spear3xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
+	.map_io		=	spear310_map_io,
+	.init_time	=	spear3xx_timer_init,
+	.init_machine	=	spear310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c
new file mode 100644
index 0000000000..12aa82b987
--- /dev/null
+++ b/arch/arm/mach-spear/spear320.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear3xx/spear320.c
+ *
+ * SPEAr320 machine source file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#define pr_fmt(fmt) "SPEAr320: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "generic.h"
+#include "spear.h"
+
+#define SPEAR320_UART1_BASE		UL(0xA3000000)
+#define SPEAR320_UART2_BASE		UL(0xA4000000)
+#define SPEAR320_SSP0_BASE		UL(0xA5000000)
+#define SPEAR320_SSP1_BASE		UL(0xA6000000)
+
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear320_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+static struct pl022_ssp_controller spear320_ssp_data[] = {
+	{
+		.bus_id = 1,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp1_tx",
+		.dma_rx_param = "ssp1_rx",
+	}, {
+		.bus_id = 2,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp2_tx",
+		.dma_rx_param = "ssp2_rx",
+	}
+};
+
+static struct amba_pl011_data spear320_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	},
+};
+
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
+			&spear320_ssp_data[0]),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
+			&spear320_ssp_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
+			&spear320_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
+			&spear320_uart_data[1]),
+	{}
+};
+
+static void __init spear320_dt_init(void)
+{
+	pl080_plat_data.slave_channels = spear320_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
+
+	of_platform_default_populate(NULL, spear320_auxdata_lookup, NULL);
+}
+
+static const char * const spear320_dt_board_compat[] = {
+	"st,spear320",
+	"st,spear320-evb",
+	"st,spear320-hmi",
+	NULL,
+};
+
+struct map_desc spear320_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)VA_SPEAR320_SOC_CONFIG_BASE,
+		.pfn		= __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init spear320_map_io(void)
+{
+	iotable_init(spear320_io_desc, ARRAY_SIZE(spear320_io_desc));
+	spear3xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
+	.map_io		=	spear320_map_io,
+	.init_time	=	spear3xx_timer_init,
+	.init_machine	=	spear320_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear320_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
new file mode 100644
index 0000000000..7ef9670d30
--- /dev/null
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear3xx/spear3xx.c
+ *
+ * SPEAr3XX machines common source file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ */
+
+#define pr_fmt(fmt) "SPEAr3xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl080.h>
+#include <linux/clk.h>
+#include <linux/clk/spear.h>
+#include <linux/io.h>
+#include <asm/mach/map.h>
+#include "pl080.h"
+#include "generic.h"
+#include "spear.h"
+#include "misc_regs.h"
+
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = pl08x_filter_id,
+	.dma_tx_param = "ssp0_tx",
+	.dma_rx_param = "ssp0_rx",
+};
+
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_burst_size = PL08X_BURST_SZ_16,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl080_get_signal,
+	.put_xfer_signal = pl080_put_signal,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear3xx_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)VA_SPEAR_ICM1_2_BASE,
+		.pfn		= __phys_to_pfn(SPEAR_ICM1_2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+}
+
+void __init spear3xx_timer_init(void)
+{
+	char pclk_name[] = "pll3_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE);
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n",
+				__func__, pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_of_timer();
+}
diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
new file mode 100644
index 0000000000..f0a1e704cc
--- /dev/null
+++ b/arch/arm/mach-spear/spear6xx.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-spear6xx/spear6xx.c
+ *
+ * SPEAr6XX machines common source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ */
+
+#include <linux/amba/pl08x.h>
+#include <linux/clk.h>
+#include <linux/clk/spear.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/amba/pl080.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include "pl080.h"
+#include "generic.h"
+#include "spear.h"
+#include "misc_regs.h"
+
+/* dmac device registration */
+static struct pl08x_channel_data spear600_dma_info[] = {
+	{
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ext0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 2,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+static struct pl08x_platform_data spear6xx_pl080_plat_data = {
+	.memcpy_burst_size = PL08X_BURST_SZ_16,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl080_get_signal,
+	.put_xfer_signal = pl080_put_signal,
+	.slave_channels = spear600_dma_info,
+	.num_slave_channels = ARRAY_SIZE(spear600_dma_info),
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xF0000000		0xF0000000
+ * 0xF1000000		0xF1000000
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+static struct map_desc spear6xx_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)VA_SPEAR6XX_ML_CPU_BASE,
+		.pfn		= __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE),
+		.length		= 2 * SZ_16M,
+		.type		= MT_DEVICE
+	},	{
+		.virtual	= (unsigned long)VA_SPEAR_ICM1_2_BASE,
+		.pfn		= __phys_to_pfn(SPEAR_ICM1_2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+static void __init spear6xx_map_io(void)
+{
+	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
+}
+
+static void __init spear6xx_timer_init(void)
+{
+	char pclk_name[] = "pll3_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear6xx_clk_init(MISC_BASE);
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n",
+				__func__, pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_of_timer();
+}
+
+/* Add auxdata to pass platform data */
+static struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
+			&spear6xx_pl080_plat_data),
+	{}
+};
+
+static void __init spear600_dt_init(void)
+{
+	of_platform_default_populate(NULL, spear6xx_auxdata_lookup, NULL);
+}
+
+static const char *spear600_dt_board_compat[] = {
+	"st,spear600",
+	NULL
+};
+
+DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
+	.map_io		=	spear6xx_map_io,
+	.init_time	=	spear6xx_timer_init,
+	.init_machine	=	spear600_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear600_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
new file mode 100644
index 0000000000..5371c82478
--- /dev/null
+++ b/arch/arm/mach-spear/time.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/plat-spear/time.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Shiraz Hashim<shiraz.linux.kernel@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/time.h>
+#include <linux/irq.h>
+#include <asm/mach/time.h>
+#include "generic.h"
+
+/*
+ * We would use TIMER0 and TIMER1 as clockevent and clocksource.
+ * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
+ * they share same functional clock. Any change in one's functional clock will
+ * also affect other timer.
+ */
+
+#define CLKEVT	0	/* gpt0, channel0 as clockevent */
+#define CLKSRC	1	/* gpt0, channel1 as clocksource */
+
+/* Register offsets, x is channel number */
+#define CR(x)		((x) * 0x80 + 0x80)
+#define IR(x)		((x) * 0x80 + 0x84)
+#define LOAD(x)		((x) * 0x80 + 0x88)
+#define COUNT(x)	((x) * 0x80 + 0x8C)
+
+/* Reg bit definitions */
+#define CTRL_INT_ENABLE		0x0100
+#define CTRL_ENABLE		0x0020
+#define CTRL_ONE_SHOT		0x0010
+
+#define CTRL_PRESCALER1		0x0
+#define CTRL_PRESCALER2		0x1
+#define CTRL_PRESCALER4		0x2
+#define CTRL_PRESCALER8		0x3
+#define CTRL_PRESCALER16	0x4
+#define CTRL_PRESCALER32	0x5
+#define CTRL_PRESCALER64	0x6
+#define CTRL_PRESCALER128	0x7
+#define CTRL_PRESCALER256	0x8
+
+#define INT_STATUS		0x1
+
+/*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define SPEAR_MIN_RANGE 4
+
+static __iomem void *gpt_base;
+static struct clk *gpt_clk;
+
+static int clockevent_next_event(unsigned long evt,
+				 struct clock_event_device *clk_event_dev);
+
+static void __init spear_clocksource_init(void)
+{
+	u32 tick_rate;
+	u16 val;
+
+	/* program the prescaler (/256)*/
+	writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
+
+	/* find out actual clock driving Timer */
+	tick_rate = clk_get_rate(gpt_clk);
+	tick_rate >>= CTRL_PRESCALER256;
+
+	writew(0xFFFF, gpt_base + LOAD(CLKSRC));
+
+	val = readw(gpt_base + CR(CLKSRC));
+	val &= ~CTRL_ONE_SHOT;	/* autoreload mode */
+	val |= CTRL_ENABLE ;
+	writew(val, gpt_base + CR(CLKSRC));
+
+	/* register the clocksource */
+	clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate,
+		200, 16, clocksource_mmio_readw_up);
+}
+
+static inline void spear_timer_shutdown(struct clock_event_device *evt)
+{
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	/* stop the timer */
+	val &= ~CTRL_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+}
+
+static int spear_shutdown(struct clock_event_device *evt)
+{
+	spear_timer_shutdown(evt);
+
+	return 0;
+}
+
+static int spear_set_oneshot(struct clock_event_device *evt)
+{
+	u16 val;
+
+	/* stop the timer */
+	spear_timer_shutdown(evt);
+
+	val = readw(gpt_base + CR(CLKEVT));
+	val |= CTRL_ONE_SHOT;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	return 0;
+}
+
+static int spear_set_periodic(struct clock_event_device *evt)
+{
+	u32 period;
+	u16 val;
+
+	/* stop the timer */
+	spear_timer_shutdown(evt);
+
+	period = clk_get_rate(gpt_clk) / HZ;
+	period >>= CTRL_PRESCALER16;
+	writew(period, gpt_base + LOAD(CLKEVT));
+
+	val = readw(gpt_base + CR(CLKEVT));
+	val &= ~CTRL_ONE_SHOT;
+	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	return 0;
+}
+
+static struct clock_event_device clkevt = {
+	.name = "tmr0",
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown = spear_shutdown,
+	.set_state_periodic = spear_set_periodic,
+	.set_state_oneshot = spear_set_oneshot,
+	.tick_resume = spear_shutdown,
+	.set_next_event = clockevent_next_event,
+	.shift = 0,	/* to be computed */
+};
+
+static int clockevent_next_event(unsigned long cycles,
+				 struct clock_event_device *clk_event_dev)
+{
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	if (val & CTRL_ENABLE)
+		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
+
+	writew(cycles, gpt_base + LOAD(CLKEVT));
+
+	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	return 0;
+}
+
+static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clkevt;
+
+	writew(INT_STATUS, gpt_base + IR(CLKEVT));
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void __init spear_clockevent_init(int irq)
+{
+	u32 tick_rate;
+
+	/* program the prescaler */
+	writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
+
+	tick_rate = clk_get_rate(gpt_clk);
+	tick_rate >>= CTRL_PRESCALER16;
+
+	clkevt.cpumask = cpumask_of(0);
+
+	clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
+
+	if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", irq);
+}
+
+static const struct of_device_id timer_of_match[] __initconst = {
+	{ .compatible = "st,spear-timer", },
+	{ },
+};
+
+void __init spear_setup_of_timer(void)
+{
+	struct device_node *np;
+	int irq, ret;
+
+	np = of_find_matching_node(NULL, timer_of_match);
+	if (!np) {
+		pr_err("%s: No timer passed via DT\n", __func__);
+		return;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		pr_err("%s: No irq passed for timer via DT\n", __func__);
+		goto err_put_np;
+	}
+
+	gpt_base = of_iomap(np, 0);
+	if (!gpt_base) {
+		pr_err("%s: of iomap failed\n", __func__);
+		goto err_put_np;
+	}
+
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		goto err_iomap;
+	}
+
+	ret = clk_prepare_enable(gpt_clk);
+	if (ret < 0) {
+		pr_err("%s:couldn't prepare-enable gpt clock\n", __func__);
+		goto err_prepare_enable_clk;
+	}
+
+	of_node_put(np);
+
+	spear_clockevent_init(irq);
+	spear_clocksource_init();
+
+	return;
+
+err_prepare_enable_clk:
+	clk_put(gpt_clk);
+err_iomap:
+	iounmap(gpt_base);
+err_put_np:
+	of_node_put(np);
+}