Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 469 insertions, 0 deletions

diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
new file mode 100644
index 0000000000..e89ce467f6
--- /dev/null
+++ b/arch/arm/mm/proc-arm1022.S
@@ -0,0 +1,469 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E
+ *
+ *  Copyright (C) 2000 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the ARM1022E.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/pgtable.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/ptrace.h>
+
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions.  Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define MAX_AREA_SIZE	32768
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE	32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS	16
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES	64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintenance instructions.
+ */
+#define CACHE_DLIMIT	32768
+
+	.text
+/*
+ * cpu_arm1022_proc_init()
+ */
+ENTRY(cpu_arm1022_proc_init)
+	ret	lr
+
+/*
+ * cpu_arm1022_proc_fin()
+ */
+ENTRY(cpu_arm1022_proc_fin)
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000 		@ ...i............
+	bic	r0, r0, #0x000e 		@ ............wca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ret	lr
+
+/*
+ * cpu_arm1022_reset(loc)
+ *
+ * Perform a soft reset of the system.	Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+	.align	5
+	.pushsection	.idmap.text, "ax"
+ENTRY(cpu_arm1022_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+#ifdef CONFIG_MMU
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+#endif
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x000f 		@ ............wcam
+	bic	ip, ip, #0x1100 		@ ...i...s........
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	ret	r0
+ENDPROC(cpu_arm1022_reset)
+	.popsection
+
+/*
+ * cpu_arm1022_do_idle()
+ */
+	.align	5
+ENTRY(cpu_arm1022_do_idle)
+	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
+	ret	lr
+
+/* ================================= CACHE ================================ */
+
+	.align	5
+
+/*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1022_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+#endif
+	ret	lr
+ENDPROC(arm1022_flush_icache_all)
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Invalidate all cache entries in a particular address
+ *	space.
+ */
+ENTRY(arm1022_flush_user_cache_all)
+	/* FALLTHROUGH */
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(arm1022_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	mov	ip, #0
+__flush_whole_cache:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
+1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
+	subs	r3, r3, #1 << 26
+	bcs	2b				@ entries 63 to 0
+	subs	r1, r1, #1 << 5
+	bcs	1b				@ segments 15 to 0
+#endif
+	tst	r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+#endif
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
+	ret	lr
+
+/*
+ *	flush_user_cache_range(start, end, flags)
+ *
+ *	Invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start	- start address (inclusive)
+ *	- end	- end address (exclusive)
+ *	- flags	- vm_flags for this space
+ */
+ENTRY(arm1022_flush_user_cache_range)
+	mov	ip, #0
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #CACHE_DLIMIT
+	bhs	__flush_whole_cache
+
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+#endif
+	tst	r2, #VM_EXEC
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+#endif
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
+	ret	lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm1022_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm1022_coherent_user_range)
+	mov	ip, #0
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+#endif
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+#endif
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	r0, #0
+	ret	lr
+
+/*
+ *	flush_kern_dcache_area(void *addr, size_t size)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- kernel address
+ *	- size	- region size
+ */
+ENTRY(arm1022_flush_kern_dcache_area)
+	mov	ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	add	r1, r0, r1
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+#endif
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	ret	lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as v4wb)
+ */
+arm1022_dma_inv_range:
+	mov	ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	tst	r0, #CACHE_DLINESIZE - 1
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+#endif
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	ret	lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as v4wb)
+ */
+arm1022_dma_clean_range:
+	mov	ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+#endif
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	ret	lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm1022_dma_flush_range)
+	mov	ip, #0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+#endif
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	ret	lr
+
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1022_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm1022_dma_clean_range
+	bcs	arm1022_dma_inv_range
+	b	arm1022_dma_flush_range
+ENDPROC(arm1022_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1022_dma_unmap_area)
+	ret	lr
+ENDPROC(arm1022_dma_unmap_area)
+
+	.globl	arm1022_flush_kern_cache_louis
+	.equ	arm1022_flush_kern_cache_louis, arm1022_flush_kern_cache_all
+
+	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+	define_cache_functions arm1022
+
+	.align	5
+ENTRY(cpu_arm1022_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	mov	ip, #0
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	subs	r1, r1, #CACHE_DLINESIZE
+	bhi	1b
+#endif
+	ret	lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_arm1022_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_arm1022_switch_mm)
+#ifdef CONFIG_MMU
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
+1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
+	subs	r3, r3, #1 << 26
+	bcs	2b				@ entries 63 to 0
+	subs	r1, r1, #1 << 5
+	bcs	1b				@ segments 15 to 0
+#endif
+	mov	r1, #0
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I cache
+#endif
+	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
+#endif
+	ret	lr
+        
+/*
+ * cpu_arm1022_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	5
+ENTRY(cpu_arm1022_set_pte_ext)
+#ifdef CONFIG_MMU
+	armv3_set_pte_ext
+	mov	r0, r0
+#ifndef CONFIG_CPU_DCACHE_DISABLE
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+#endif
+#endif /* CONFIG_MMU */
+	ret	lr
+
+	.type	__arm1022_setup, #function
+__arm1022_setup:
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
+#ifdef CONFIG_MMU
+	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
+#endif
+	adr	r5, arm1022_crval
+	ldmia	r5, {r5, r6}
+	mrc	p15, 0, r0, c1, c0		@ get control register v4
+	bic	r0, r0, r5
+	orr	r0, r0, r6
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+	orr	r0, r0, #0x4000 		@ .R..............
+#endif
+	ret	lr
+	.size	__arm1022_setup, . - __arm1022_setup
+
+	/*
+	 *  R
+	 * .RVI ZFRS BLDP WCAM
+	 * .011 1001 ..11 0101
+	 * 
+	 */
+	.type	arm1022_crval, #object
+arm1022_crval:
+	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
+
+	__INITDATA
+	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+	define_processor_functions arm1022, dabort=v4t_early_abort, pabort=legacy_pabort
+
+	.section ".rodata"
+
+	string	cpu_arch_name, "armv5te"
+	string	cpu_elf_name, "v5"
+	string	cpu_arm1022_name, "ARM1022"
+
+	.align
+
+	.section ".proc.info.init", "a"
+
+	.type	__arm1022_proc_info,#object
+__arm1022_proc_info:
+	.long	0x4105a220			@ ARM 1022E (v5TE)
+	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	initfn	__arm1022_setup, __arm1022_proc_info
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
+	.long	cpu_arm1022_name
+	.long	arm1022_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	v4wb_user_fns
+	.long	arm1022_cache_fns
+	.size	__arm1022_proc_info, . - __arm1022_proc_info