Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 95 insertions, 24 deletions

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index cf4e501c84..61c8fd49c9 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -96,42 +96,49 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&cpu_speed_bin>;
 		opp-shared;
 
 		opp-864000000 {
 			opp-hz = /bits/ 64 <864000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -236,31 +243,26 @@
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x00078000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x00078000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "gcc_usb0_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
-				      <0x0 0x00078400 0x0 0x200>, /* Rx */
-				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
-				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: qusb@79000 {
@@ -314,6 +316,11 @@
 			reg = <0x0 0x000a4000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@135 {
+				reg = <0x135 0x1>;
+				bits = <7 1>;
+			};
 		};
 
 		prng: qrng@e3000 {
@@ -439,6 +446,26 @@
 			qcom,ee = <0>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78af000 0x0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b0000 0x0 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x0 0x078b1000 0x0 0x200>;
@@ -449,6 +476,36 @@
 			status = "disabled";
 		};
 
+		blsp1_uart4: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b2000 0x0 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b3000 0x0 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b4000 0x0 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -477,6 +534,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b9000 0x0 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -566,7 +637,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0x08a00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				clocks = <&xo>;
 				clock-names = "ref";
@@ -611,8 +682,8 @@
 			compatible = "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -731,7 +802,7 @@
 			};
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq6018";
 			reg = <0x0 0x20000000 0x0 0xf1d>,
 			      <0x0 0x20000f20 0x0 0xa8>,