Adding upstream version 6.9.10.upstream/6.9.10

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 58 insertions, 19 deletions

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 832f472c4b..ceed9c4e8f 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -1459,9 +1459,23 @@
 
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
-			reg = <0 0x19200000 0 0xd80000>,
+			reg = <0 0x19200000 0 0x80000>,
+			      <0 0x19300000 0 0x80000>,
+			      <0 0x19600000 0 0x80000>,
+			      <0 0x19700000 0 0x80000>,
+			      <0 0x19a00000 0 0x80000>,
+			      <0 0x19b00000 0 0x80000>,
+			      <0 0x19e00000 0 0x80000>,
+			      <0 0x19f00000 0 0x80000>,
 			      <0 0x1a200000 0 0x80000>;
 			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
 				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 231cea1f0f..beb2039643 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -3605,7 +3605,7 @@
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pcie0: pcie@1c00000 {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 053f7861c3..b594938c75 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2608,11 +2608,14 @@
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8180x-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
-			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
-			      <0 0x09600000 0 0x50000>;
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 15ae94c160..4ddca2ff7a 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -618,15 +618,16 @@
 
 	status = "okay";
 
-	/* FIXME: verify */
 	touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth5015m", "elan,ekth6915";
 		reg = <0x10>;
 
-		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_s10b>;
+		reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		no-reset-on-power-off;
+
+		vcc33-supply = <&vreg_misc_3p3>;
+		vccio-supply = <&vreg_misc_3p3>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts0_default>;
@@ -1417,8 +1418,8 @@
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index aca0a87092..9ed062150a 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1090,6 +1090,7 @@
 
 			power-domains = <&rpmpd SM6115_VDDCX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x00c0 0x0>;
 			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
 					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
 					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 6a0a54532e..c5442396dc 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -48,6 +48,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	sound {
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-CRD";
@@ -92,7 +101,7 @@
 			};
 
 			codec {
-				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
 			};
 
 			platform {
@@ -727,7 +736,7 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index e76d29053d..49e19a6445 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -22,6 +22,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 6b40082bac..ee78185ca5 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2737,15 +2737,17 @@
 			device_type = "pci";
 			compatible = "qcom,pcie-x1e80100";
 			reg = <0 0x01bf8000 0 0x3000>,
-			      <0 0x70000000 0 0xf1d>,
-			      <0 0x70000f20 0 0xa8>,
+			      <0 0x70000000 0 0xf20>,
+			      <0 0x70000f40 0 0xa8>,
 			      <0 0x70001000 0 0x1000>,
-			      <0 0x70100000 0 0x100000>;
+			      <0 0x70100000 0 0x100000>,
+			      <0 0x01bfb000 0 0x1000>;
 			reg-names = "parf",
 				    "dbi",
 				    "elbi",
 				    "atu",
-				    "config";
+				    "config",
+				    "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,