Adding upstream version 6.7.7.upstream/6.7.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 100 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index d34a1d5e79..66791a974f 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -6,6 +6,60 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('E', 5, AF10)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 0, AF10)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('E', 1, AF10)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('E', 2, AF10)>; /* SDMMC1_CMD */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('E', 5, AF10)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 0, AF10)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('E', 1, AF10)>; /* SDMMC1_D3 */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('E', 2, AF10)>; /* SDMMC1_CMD */
+			slew-rate = <2>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 4, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 0, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('E', 1, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('E', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 5268a43218..124403f5f1 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -28,6 +28,12 @@
 		interrupt-parent = <&intc>;
 	};
 
+	arm_wdt: watchdog {
+		compatible = "arm,smc-wdt";
+		arm,smc-id = <0xb200005a>;
+		status = "disabled";
+	};
+
 	clocks {
 		ck_flexgen_08: ck-flexgen-08 {
 			#clock-cells = <0>;
@@ -119,6 +125,19 @@
 				clocks = <&ck_flexgen_08>;
 				status = "disabled";
 			};
+
+			sdmmc1: mmc@48220000 {
+				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00353180>;
+				reg = <0x48220000 0x400>, <0x44230400 0x8>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_flexgen_51>;
+				clock-names = "apb_pclk";
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <120000000>;
+				status = "disabled";
+			};
 		};
 
 		syscfg: syscon@44230000 {
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 39b4726cc0..b2d3afb157 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "stm32mp257.dtsi"
 #include "stm32mp25xf.dtsi"
 #include "stm32mp25-pinctrl.dtsi"
@@ -39,6 +40,32 @@
 			no-map;
 		};
 	};
+
+	vdd_sdcard: vdd-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sdcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiod 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sdcard>;
+	status = "okay";
 };
 
 &usart2 {