Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 165 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
new file mode 100644
index 0000000000..47bb5480b5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for dual RPi Camera V2.1 (Sony IMX219) interfaced with CSI2
+ * on J721E SK, AM68 SK or AM69-SK board.
+ * https://datasheets.raspberrypi.org/camera/camera-v2-schematic.pdf
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	clk_imx219_fixed: imx219-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&csi_mux {
+	idle-state = <1>;
+};
+
+/* CAM0 I2C */
+&cam0_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	imx219_0: imx219-0@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+
+		clocks = <&clk_imx219_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				link-frequencies = /bits/ 64 <456000000>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+/* CAM1 I2C */
+&cam1_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	imx219_1: imx219-1@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+
+		clocks = <&clk_imx219_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam1: endpoint {
+				remote-endpoint = <&csi2rx1_in_sensor>;
+				link-frequencies = /bits/ 64 <456000000>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		csi0_port1: port@1 {
+			reg = <1>;
+			status = "disabled";
+		};
+
+		csi0_port2: port@2 {
+			reg = <2>;
+			status = "disabled";
+		};
+
+		csi0_port3: port@3 {
+			reg = <3>;
+			status = "disabled";
+		};
+
+		csi0_port4: port@4 {
+			reg = <4>;
+			status = "disabled";
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&cdns_csi2rx1 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi1_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx1_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam1>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		csi1_port1: port@1 {
+			reg = <1>;
+			status = "disabled";
+		};
+
+		csi1_port2: port@2 {
+			reg = <2>;
+			status = "disabled";
+		};
+
+		csi1_port3: port@3 {
+			reg = <3>;
+			status = "disabled";
+		};
+
+		csi1_port4: port@4 {
+			reg = <4>;
+			status = "disabled";
+		};
+	};
+};
+
+&dphy1 {
+	status = "okay";
+};
+
+&ti_csi2rx1 {
+	status = "okay";
+};