Adding upstream version 6.7.7.upstream/6.7.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 576 deletions

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
deleted file mode 100644
index 0a0328e61b..0000000000
--- a/arch/ia64/pci/pci.c
+++ /dev/null
@@ -1,576 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * pci.c - Low-Level PCI Access in IA-64
- *
- * Derived from bios32.c of i386 tree.
- *
- * (c) Copyright 2002, 2005 Hewlett-Packard Development Company, L.P.
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Bjorn Helgaas <bjorn.helgaas@hp.com>
- * Copyright (C) 2004 Silicon Graphics, Inc.
- *
- * Note: Above list of copyright holders is incomplete...
- */
-
-#include <linux/acpi.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pci-acpi.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/memblock.h>
-#include <linux/export.h>
-
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/sal.h>
-#include <asm/smp.h>
-#include <asm/irq.h>
-#include <asm/hw_irq.h>
-
-/*
- * Low-level SAL-based PCI configuration access functions. Note that SAL
- * calls are already serialized (via sal_lock), so we don't need another
- * synchronization mechanism here.
- */
-
-#define PCI_SAL_ADDRESS(seg, bus, devfn, reg)		\
-	(((u64) seg << 24) | (bus << 16) | (devfn << 8) | (reg))
-
-/* SAL 3.2 adds support for extended config space. */
-
-#define PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg)	\
-	(((u64) seg << 28) | (bus << 20) | (devfn << 12) | (reg))
-
-int raw_pci_read(unsigned int seg, unsigned int bus, unsigned int devfn,
-	      int reg, int len, u32 *value)
-{
-	u64 addr, data = 0;
-	int mode, result;
-
-	if (!value || (seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095))
-		return -EINVAL;
-
-	if ((seg | reg) <= 255) {
-		addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg);
-		mode = 0;
-	} else if (sal_revision >= SAL_VERSION_CODE(3,2)) {
-		addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg);
-		mode = 1;
-	} else {
-		return -EINVAL;
-	}
-
-	result = ia64_sal_pci_config_read(addr, mode, len, &data);
-	if (result != 0)
-		return -EINVAL;
-
-	*value = (u32) data;
-	return 0;
-}
-
-int raw_pci_write(unsigned int seg, unsigned int bus, unsigned int devfn,
-	       int reg, int len, u32 value)
-{
-	u64 addr;
-	int mode, result;
-
-	if ((seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095))
-		return -EINVAL;
-
-	if ((seg | reg) <= 255) {
-		addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg);
-		mode = 0;
-	} else if (sal_revision >= SAL_VERSION_CODE(3,2)) {
-		addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg);
-		mode = 1;
-	} else {
-		return -EINVAL;
-	}
-	result = ia64_sal_pci_config_write(addr, mode, len, value);
-	if (result != 0)
-		return -EINVAL;
-	return 0;
-}
-
-static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-							int size, u32 *value)
-{
-	return raw_pci_read(pci_domain_nr(bus), bus->number,
-				 devfn, where, size, value);
-}
-
-static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-							int size, u32 value)
-{
-	return raw_pci_write(pci_domain_nr(bus), bus->number,
-				  devfn, where, size, value);
-}
-
-struct pci_ops pci_root_ops = {
-	.read = pci_read,
-	.write = pci_write,
-};
-
-struct pci_root_info {
-	struct acpi_pci_root_info common;
-	struct pci_controller controller;
-	struct list_head io_resources;
-};
-
-static unsigned int new_space(u64 phys_base, int sparse)
-{
-	u64 mmio_base;
-	int i;
-
-	if (phys_base == 0)
-		return 0;	/* legacy I/O port space */
-
-	mmio_base = (u64) ioremap(phys_base, 0);
-	for (i = 0; i < num_io_spaces; i++)
-		if (io_space[i].mmio_base == mmio_base &&
-		    io_space[i].sparse == sparse)
-			return i;
-
-	if (num_io_spaces == MAX_IO_SPACES) {
-		pr_err("PCI: Too many IO port spaces "
-			"(MAX_IO_SPACES=%lu)\n", MAX_IO_SPACES);
-		return ~0;
-	}
-
-	i = num_io_spaces++;
-	io_space[i].mmio_base = mmio_base;
-	io_space[i].sparse = sparse;
-
-	return i;
-}
-
-static int add_io_space(struct device *dev, struct pci_root_info *info,
-			struct resource_entry *entry)
-{
-	struct resource_entry *iospace;
-	struct resource *resource, *res = entry->res;
-	char *name;
-	unsigned long base, min, max, base_port;
-	unsigned int sparse = 0, space_nr, len;
-
-	len = strlen(info->common.name) + 32;
-	iospace = resource_list_create_entry(NULL, len);
-	if (!iospace) {
-		dev_err(dev, "PCI: No memory for %s I/O port space\n",
-			info->common.name);
-		return -ENOMEM;
-	}
-
-	if (res->flags & IORESOURCE_IO_SPARSE)
-		sparse = 1;
-	space_nr = new_space(entry->offset, sparse);
-	if (space_nr == ~0)
-		goto free_resource;
-
-	name = (char *)(iospace + 1);
-	min = res->start - entry->offset;
-	max = res->end - entry->offset;
-	base = __pa(io_space[space_nr].mmio_base);
-	base_port = IO_SPACE_BASE(space_nr);
-	snprintf(name, len, "%s I/O Ports %08lx-%08lx", info->common.name,
-		 base_port + min, base_port + max);
-
-	/*
-	 * The SDM guarantees the legacy 0-64K space is sparse, but if the
-	 * mapping is done by the processor (not the bridge), ACPI may not
-	 * mark it as sparse.
-	 */
-	if (space_nr == 0)
-		sparse = 1;
-
-	resource = iospace->res;
-	resource->name  = name;
-	resource->flags = IORESOURCE_MEM;
-	resource->start = base + (sparse ? IO_SPACE_SPARSE_ENCODING(min) : min);
-	resource->end   = base + (sparse ? IO_SPACE_SPARSE_ENCODING(max) : max);
-	if (insert_resource(&iomem_resource, resource)) {
-		dev_err(dev,
-			"can't allocate host bridge io space resource  %pR\n",
-			resource);
-		goto free_resource;
-	}
-
-	entry->offset = base_port;
-	res->start = min + base_port;
-	res->end = max + base_port;
-	resource_list_add_tail(iospace, &info->io_resources);
-
-	return 0;
-
-free_resource:
-	resource_list_free_entry(iospace);
-	return -ENOSPC;
-}
-
-/*
- * An IO port or MMIO resource assigned to a PCI host bridge may be
- * consumed by the host bridge itself or available to its child
- * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
- * to tell whether the resource is consumed by the host bridge itself,
- * but firmware hasn't used that bit consistently, so we can't rely on it.
- *
- * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
- * to be available to child bus/devices except one special case:
- *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
- *     to access PCI configuration space.
- *
- * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
- */
-static bool resource_is_pcicfg_ioport(struct resource *res)
-{
-	return (res->flags & IORESOURCE_IO) &&
-		res->start == 0xCF8 && res->end == 0xCFF;
-}
-
-static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
-{
-	struct device *dev = &ci->bridge->dev;
-	struct pci_root_info *info;
-	struct resource *res;
-	struct resource_entry *entry, *tmp;
-	int status;
-
-	status = acpi_pci_probe_root_resources(ci);
-	if (status > 0) {
-		info = container_of(ci, struct pci_root_info, common);
-		resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
-			res = entry->res;
-			if (res->flags & IORESOURCE_MEM) {
-				/*
-				 * HP's firmware has a hack to work around a
-				 * Windows bug. Ignore these tiny memory ranges.
-				 */
-				if (resource_size(res) <= 16) {
-					resource_list_del(entry);
-					insert_resource(&iomem_resource,
-							entry->res);
-					resource_list_add_tail(entry,
-							&info->io_resources);
-				}
-			} else if (res->flags & IORESOURCE_IO) {
-				if (resource_is_pcicfg_ioport(entry->res))
-					resource_list_destroy_entry(entry);
-				else if (add_io_space(dev, info, entry))
-					resource_list_destroy_entry(entry);
-			}
-		}
-	}
-
-	return status;
-}
-
-static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci)
-{
-	struct pci_root_info *info;
-	struct resource_entry *entry, *tmp;
-
-	info = container_of(ci, struct pci_root_info, common);
-	resource_list_for_each_entry_safe(entry, tmp, &info->io_resources) {
-		release_resource(entry->res);
-		resource_list_destroy_entry(entry);
-	}
-	kfree(info);
-}
-
-static struct acpi_pci_root_ops pci_acpi_root_ops = {
-	.pci_ops = &pci_root_ops,
-	.release_info = pci_acpi_root_release_info,
-	.prepare_resources = pci_acpi_root_prepare_resources,
-};
-
-struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
-{
-	struct acpi_device *device = root->device;
-	struct pci_root_info *info;
-
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		dev_err(&device->dev,
-			"pci_bus %04x:%02x: ignored (out of memory)\n",
-			root->segment, (int)root->secondary.start);
-		return NULL;
-	}
-
-	info->controller.segment = root->segment;
-	info->controller.companion = device;
-	info->controller.node = acpi_get_node(device->handle);
-	INIT_LIST_HEAD(&info->io_resources);
-	return acpi_pci_root_create(root, &pci_acpi_root_ops,
-				    &info->common, &info->controller);
-}
-
-int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
-{
-	/*
-	 * We pass NULL as parent to pci_create_root_bus(), so if it is not NULL
-	 * here, pci_create_root_bus() has been called by someone else and
-	 * sysdata is likely to be different from what we expect.  Let it go in
-	 * that case.
-	 */
-	if (!bridge->dev.parent) {
-		struct pci_controller *controller = bridge->bus->sysdata;
-		ACPI_COMPANION_SET(&bridge->dev, controller->companion);
-	}
-	return 0;
-}
-
-void pcibios_fixup_device_resources(struct pci_dev *dev)
-{
-	int idx;
-
-	if (!dev->bus)
-		return;
-
-	for (idx = 0; idx < PCI_BRIDGE_RESOURCES; idx++) {
-		struct resource *r = &dev->resource[idx];
-
-		if (!r->flags || r->parent || !r->start)
-			continue;
-
-		pci_claim_resource(dev, idx);
-	}
-}
-EXPORT_SYMBOL_GPL(pcibios_fixup_device_resources);
-
-static void pcibios_fixup_bridge_resources(struct pci_dev *dev)
-{
-	int idx;
-
-	if (!dev->bus)
-		return;
-
-	for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
-		struct resource *r = &dev->resource[idx];
-
-		if (!r->flags || r->parent || !r->start)
-			continue;
-
-		pci_claim_bridge_resource(dev, idx);
-	}
-}
-
-/*
- *  Called after each bus is probed, but before its children are examined.
- */
-void pcibios_fixup_bus(struct pci_bus *b)
-{
-	struct pci_dev *dev;
-
-	if (b->self) {
-		pci_read_bridge_bases(b);
-		pcibios_fixup_bridge_resources(b->self);
-	}
-	list_for_each_entry(dev, &b->devices, bus_list)
-		pcibios_fixup_device_resources(dev);
-}
-
-void pcibios_add_bus(struct pci_bus *bus)
-{
-	acpi_pci_add_bus(bus);
-}
-
-void pcibios_remove_bus(struct pci_bus *bus)
-{
-	acpi_pci_remove_bus(bus);
-}
-
-void pcibios_set_master (struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-int
-pcibios_enable_device (struct pci_dev *dev, int mask)
-{
-	int ret;
-
-	ret = pci_enable_resources(dev, mask);
-	if (ret < 0)
-		return ret;
-
-	if (!pci_dev_msi_enabled(dev))
-		return acpi_pci_irq_enable(dev);
-	return 0;
-}
-
-void
-pcibios_disable_device (struct pci_dev *dev)
-{
-	BUG_ON(atomic_read(&dev->enable_cnt));
-	if (!pci_dev_msi_enabled(dev))
-		acpi_pci_irq_disable(dev);
-}
-
-/**
- * pci_get_legacy_mem - generic legacy mem routine
- * @bus: bus to get legacy memory base address for
- *
- * Find the base of legacy memory for @bus.  This is typically the first
- * megabyte of bus address space for @bus or is simply 0 on platforms whose
- * chipsets support legacy I/O and memory routing.  Returns the base address
- * or an error pointer if an error occurred.
- *
- * This is the ia64 generic version of this routine.  Other platforms
- * are free to override it with a machine vector.
- */
-char *pci_get_legacy_mem(struct pci_bus *bus)
-{
-	return (char *)__IA64_UNCACHED_OFFSET;
-}
-
-/**
- * pci_mmap_legacy_page_range - map legacy memory space to userland
- * @bus: bus whose legacy space we're mapping
- * @vma: vma passed in by mmap
- *
- * Map legacy memory space for this device back to userspace using a machine
- * vector to get the base address.
- */
-int
-pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
-			   enum pci_mmap_state mmap_state)
-{
-	unsigned long size = vma->vm_end - vma->vm_start;
-	pgprot_t prot;
-	char *addr;
-
-	/* We only support mmap'ing of legacy memory space */
-	if (mmap_state != pci_mmap_mem)
-		return -ENOSYS;
-
-	/*
-	 * Avoid attribute aliasing.  See Documentation/arch/ia64/aliasing.rst
-	 * for more details.
-	 */
-	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
-		return -EINVAL;
-	prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size,
-				    vma->vm_page_prot);
-
-	addr = pci_get_legacy_mem(bus);
-	if (IS_ERR(addr))
-		return PTR_ERR(addr);
-
-	vma->vm_pgoff += (unsigned long)addr >> PAGE_SHIFT;
-	vma->vm_page_prot = prot;
-
-	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			    size, vma->vm_page_prot))
-		return -EAGAIN;
-
-	return 0;
-}
-
-/**
- * pci_legacy_read - read from legacy I/O space
- * @bus: bus to read
- * @port: legacy port value
- * @val: caller allocated storage for returned value
- * @size: number of bytes to read
- *
- * Simply reads @size bytes from @port and puts the result in @val.
- *
- * Again, this (and the write routine) are generic versions that can be
- * overridden by the platform.  This is necessary on platforms that don't
- * support legacy I/O routing or that hard fail on legacy I/O timeouts.
- */
-int pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
-{
-	int ret = size;
-
-	switch (size) {
-	case 1:
-		*val = inb(port);
-		break;
-	case 2:
-		*val = inw(port);
-		break;
-	case 4:
-		*val = inl(port);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-/**
- * pci_legacy_write - perform a legacy I/O write
- * @bus: bus pointer
- * @port: port to write
- * @val: value to write
- * @size: number of bytes to write from @val
- *
- * Simply writes @size bytes of @val to @port.
- */
-int pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
-{
-	int ret = size;
-
-	switch (size) {
-	case 1:
-		outb(val, port);
-		break;
-	case 2:
-		outw(val, port);
-		break;
-	case 4:
-		outl(val, port);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-/**
- * set_pci_cacheline_size - determine cacheline size for PCI devices
- *
- * We want to use the line-size of the outer-most cache.  We assume
- * that this line-size is the same for all CPUs.
- *
- * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info().
- */
-static void __init set_pci_dfl_cacheline_size(void)
-{
-	unsigned long levels, unique_caches;
-	long status;
-	pal_cache_config_info_t cci;
-
-	status = ia64_pal_cache_summary(&levels, &unique_caches);
-	if (status != 0) {
-		pr_err("%s: ia64_pal_cache_summary() failed "
-			"(status=%ld)\n", __func__, status);
-		return;
-	}
-
-	status = ia64_pal_cache_config_info(levels - 1,
-				/* cache_type (data_or_unified)= */ 2, &cci);
-	if (status != 0) {
-		pr_err("%s: ia64_pal_cache_config_info() failed "
-			"(status=%ld)\n", __func__, status);
-		return;
-	}
-	pci_dfl_cache_line_size = (1 << cci.pcci_line_size) / 4;
-}
-
-static int __init pcibios_init(void)
-{
-	set_pci_dfl_cacheline_size();
-	return 0;
-}
-
-subsys_initcall(pcibios_init);