Adding upstream version 6.9.2.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 60 insertions, 4 deletions

diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
index 49a70f8c3c..b6aeb1f70e 100644
--- a/arch/loongarch/boot/dts/loongson-2k1000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -100,6 +100,13 @@
 		#size-cells = <2>;
 		dma-coherent;
 
+		isa@18000000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x18000000 0x4000>;
+		};
+
 		liointc0: interrupt-controller@1fe01400 {
 			compatible = "loongson,liointc-2.0";
 			reg = <0x0 0x1fe01400 0x0 0x40>,
diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
index dca91caf89..74b99bd234 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -61,12 +61,45 @@
 
 &gmac0 {
 	status = "okay";
+
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <2>;
+		};
+	};
 };
 
 &gmac1 {
 	status = "okay";
+
+	phy-mode = "gmii";
+	phy-handle = <&phy1>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <2>;
+		};
+	};
 };
 
 &gmac2 {
 	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy2>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy2: ethernet-phy@2 {
+			reg = <0>;
+		};
+	};
 };
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index a231949b5f..9eab2d02cb 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -51,6 +51,13 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 
+		isa@18400000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x18400000 0x4000>;
+		};
+
 		pmc: power-management@100d0000 {
 			compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
 			reg = <0x0 0x100d0000 0x0 0x58>;
@@ -109,6 +116,8 @@
 		msi: msi-controller@1fe01140 {
 			compatible = "loongson,pch-msi-1.0";
 			reg = <0x0 0x1fe01140 0x0 0x8>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
 			msi-controller;
 			loongson,msi-base-vec = <64>;
 			loongson,msi-num-vecs = <192>;
@@ -140,27 +149,34 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			msi-parent = <&msi>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>,
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18408000 0x0 0x00008000>,
 				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
 
 			gmac0: ethernet@3,0 {
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
 
 			gmac1: ethernet@3,1 {
 				reg = <0x1900 0x0 0x0 0x0 0x0>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
 
 			gmac2: ethernet@3,2 {
 				reg = <0x1a00 0x0 0x0 0x0 0x0>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+					     <18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&pic>;
 				status = "disabled";
 			};