Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 326 insertions, 0 deletions

diff --git a/arch/parisc/include/asm/ropes.h b/arch/parisc/include/asm/ropes.h
new file mode 100644
index 0000000000..e2d2d7e9bf
--- /dev/null
+++ b/arch/parisc/include/asm/ropes.h
@@ -0,0 +1,326 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_PARISC_ROPES_H_
+#define _ASM_PARISC_ROPES_H_
+
+#include <asm/parisc-device.h>
+
+#ifdef CONFIG_64BIT
+/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
+#define ZX1_SUPPORT
+#endif
+
+#ifdef CONFIG_PROC_FS
+/* depends on proc fs support. But costs CPU performance */
+#undef SBA_COLLECT_STATS
+#endif
+
+/*
+** The number of pdir entries to "free" before issuing
+** a read to PCOM register to flush out PCOM writes.
+** Interacts with allocation granularity (ie 4 or 8 entries
+** allocated and free'd/purged at a time might make this
+** less interesting).
+*/
+#define DELAYED_RESOURCE_CNT	16
+
+#define MAX_IOC		2	/* per Ike. Pluto/Astro only have 1. */
+#define ROPES_PER_IOC	8	/* per Ike half or Pluto/Astro */
+
+struct ioc {
+	void __iomem	*ioc_hpa;	/* I/O MMU base address */
+	char		*res_map;	/* resource map, bit == pdir entry */
+	__le64		*pdir_base;	/* physical base address */
+	unsigned long	ibase;		/* pdir IOV Space base - shared w/lba_pci */
+	unsigned long	imask;		/* pdir IOV Space mask - shared w/lba_pci */
+#ifdef ZX1_SUPPORT
+	unsigned long	iovp_mask;	/* help convert IOVA to IOVP */
+#endif
+	unsigned long	*res_hint;	/* next avail IOVP - circular search */
+	spinlock_t	res_lock;
+	unsigned int	res_bitshift;	/* from the LEFT! */
+	unsigned int	res_size;	/* size of resource map in bytes */
+#ifdef SBA_HINT_SUPPORT
+/* FIXME : DMA HINTs not used */
+	unsigned long	hint_mask_pdir; /* bits used for DMA hints */
+	unsigned int	hint_shift_pdir;
+#endif
+#if DELAYED_RESOURCE_CNT > 0
+	int		saved_cnt;
+	struct sba_dma_pair {
+			dma_addr_t	iova;
+			size_t		size;
+        } saved[DELAYED_RESOURCE_CNT];
+#endif
+
+#ifdef SBA_COLLECT_STATS
+#define SBA_SEARCH_SAMPLE	0x100
+	unsigned long	avg_search[SBA_SEARCH_SAMPLE];
+	unsigned long	avg_idx;	/* current index into avg_search */
+	unsigned long	used_pages;
+	unsigned long	msingle_calls;
+	unsigned long	msingle_pages;
+	unsigned long	msg_calls;
+	unsigned long	msg_pages;
+	unsigned long	usingle_calls;
+	unsigned long	usingle_pages;
+	unsigned long	usg_calls;
+	unsigned long	usg_pages;
+#endif
+        /* STUFF We don't need in performance path */
+	unsigned int	pdir_size;	/* in bytes, determined by IOV Space size */
+};
+
+struct sba_device {
+	struct sba_device	*next;  /* list of SBA's in system */
+	struct parisc_device	*dev;   /* dev found in bus walk */
+	const char		*name;
+	void __iomem		*sba_hpa; /* base address */
+	spinlock_t		sba_lock;
+	unsigned int		flags;  /* state/functionality enabled */
+	unsigned int		hw_rev;  /* HW revision of chip */
+
+	struct resource		chip_resv; /* MMIO reserved for chip */
+	struct resource		iommu_resv; /* MMIO reserved for iommu */
+
+	unsigned int		num_ioc;  /* number of on-board IOC's */
+	struct ioc		ioc[MAX_IOC];
+};
+
+/* list of SBA's in system, see drivers/parisc/sba_iommu.c */
+extern struct sba_device *sba_list;
+
+#define ASTRO_RUNWAY_PORT	0x582
+#define IKE_MERCED_PORT		0x803
+#define REO_MERCED_PORT		0x804
+#define REOG_MERCED_PORT	0x805
+#define PLUTO_MCKINLEY_PORT	0x880
+
+static inline int IS_ASTRO(struct parisc_device *d) {
+	return d->id.hversion == ASTRO_RUNWAY_PORT;
+}
+
+static inline int IS_IKE(struct parisc_device *d) {
+	return d->id.hversion == IKE_MERCED_PORT;
+}
+
+static inline int IS_PLUTO(struct parisc_device *d) {
+	return d->id.hversion == PLUTO_MCKINLEY_PORT;
+}
+
+#define PLUTO_IOVA_BASE	(1UL*1024*1024*1024)	/* 1GB */
+#define PLUTO_IOVA_SIZE	(1UL*1024*1024*1024)	/* 1GB */
+#define PLUTO_GART_SIZE	(PLUTO_IOVA_SIZE / 2)
+
+#define SBA_PDIR_VALID_BIT	0x8000000000000000ULL
+
+#define SBA_AGPGART_COOKIE	(__force __le64) 0x0000badbadc0ffeeULL
+
+#define SBA_FUNC_ID	0x0000	/* function id */
+#define SBA_FCLASS	0x0008	/* function class, bist, header, rev... */
+
+#define SBA_FUNC_SIZE 4096   /* SBA configuration function reg set */
+
+#define ASTRO_IOC_OFFSET	(32 * SBA_FUNC_SIZE)
+#define PLUTO_IOC_OFFSET	(1 * SBA_FUNC_SIZE)
+/* Ike's IOC's occupy functions 2 and 3 */
+#define IKE_IOC_OFFSET(p)	((p+2) * SBA_FUNC_SIZE)
+
+#define IOC_CTRL          0x8	/* IOC_CTRL offset */
+#define IOC_CTRL_TC       (1 << 0) /* TOC Enable */
+#define IOC_CTRL_CE       (1 << 1) /* Coalesce Enable */
+#define IOC_CTRL_DE       (1 << 2) /* Dillon Enable */
+#define IOC_CTRL_RM       (1 << 8) /* Real Mode */
+#define IOC_CTRL_NC       (1 << 9) /* Non Coherent Mode */
+#define IOC_CTRL_D4       (1 << 11) /* Disable 4-byte coalescing */
+#define IOC_CTRL_DD       (1 << 13) /* Disable distr. LMMIO range coalescing */
+
+/*
+** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
+** Firmware programs this stuff. Don't touch it.
+*/
+#define LMMIO_DIRECT0_BASE  0x300
+#define LMMIO_DIRECT0_MASK  0x308
+#define LMMIO_DIRECT0_ROUTE 0x310
+
+#define LMMIO_DIST_BASE  0x360
+#define LMMIO_DIST_MASK  0x368
+#define LMMIO_DIST_ROUTE 0x370
+
+#define IOS_DIST_BASE	0x390
+#define IOS_DIST_MASK	0x398
+#define IOS_DIST_ROUTE	0x3A0
+
+#define IOS_DIRECT_BASE	0x3C0
+#define IOS_DIRECT_MASK	0x3C8
+#define IOS_DIRECT_ROUTE 0x3D0
+
+/*
+** Offsets into I/O TLB (Function 2 and 3 on Ike)
+*/
+#define ROPE0_CTL	0x200  /* "regbus pci0" */
+#define ROPE1_CTL	0x208
+#define ROPE2_CTL	0x210
+#define ROPE3_CTL	0x218
+#define ROPE4_CTL	0x220
+#define ROPE5_CTL	0x228
+#define ROPE6_CTL	0x230
+#define ROPE7_CTL	0x238
+
+#define IOC_ROPE0_CFG	0x500	/* pluto only */
+#define   IOC_ROPE_AO	  0x10	/* Allow "Relaxed Ordering" */
+
+#define HF_ENABLE	0x40
+
+#define IOC_IBASE	0x300	/* IO TLB */
+#define IOC_IMASK	0x308
+#define IOC_PCOM	0x310
+#define IOC_TCNFG	0x318
+#define IOC_PDIR_BASE	0x320
+
+/*
+** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
+** It's safer (avoid memory corruption) to keep DMA page mappings
+** equivalently sized to VM PAGE_SIZE.
+**
+** We really can't avoid generating a new mapping for each
+** page since the Virtual Coherence Index has to be generated
+** and updated for each page.
+**
+** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
+*/
+#define IOVP_SIZE	PAGE_SIZE
+#define IOVP_SHIFT	PAGE_SHIFT
+#define IOVP_MASK	PAGE_MASK
+
+#define SBA_PERF_CFG	0x708	/* Performance Counter stuff */
+#define SBA_PERF_MASK1	0x718
+#define SBA_PERF_MASK2	0x730
+
+/*
+** Offsets into PCI Performance Counters (functions 12 and 13)
+** Controlled by PERF registers in function 2 & 3 respectively.
+*/
+#define SBA_PERF_CNT1	0x200
+#define SBA_PERF_CNT2	0x208
+#define SBA_PERF_CNT3	0x210
+
+/*
+** lba_device: Per instance Elroy data structure
+*/
+struct lba_device {
+	struct pci_hba_data	hba;
+
+	spinlock_t		lba_lock;
+	void			*iosapic_obj;
+
+#ifdef CONFIG_64BIT
+	void __iomem		*iop_base;	/* PA_VIEW - for IO port accessor funcs */
+#endif
+
+	int			flags;		/* state/functionality enabled */
+	int			hw_rev;		/* HW revision of chip */
+};
+
+#define ELROY_HVERS		0x782
+#define MERCURY_HVERS		0x783
+#define QUICKSILVER_HVERS	0x784
+
+static inline int IS_ELROY(struct parisc_device *d) {
+	return (d->id.hversion == ELROY_HVERS);
+}
+
+static inline int IS_MERCURY(struct parisc_device *d) {
+	return (d->id.hversion == MERCURY_HVERS);
+}
+
+static inline int IS_QUICKSILVER(struct parisc_device *d) {
+	return (d->id.hversion == QUICKSILVER_HVERS);
+}
+
+static inline int agp_mode_mercury(void __iomem *hpa) {
+	u64 bus_mode;
+
+	bus_mode = readl(hpa + 0x0620);
+	if (bus_mode & 1)
+		return 1;
+
+	return 0;
+}
+
+/*
+** I/O SAPIC init function
+** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC.
+** Call setup as part of per instance initialization.
+** (ie *not* init_module() function unless only one is present.)
+** fixup_irq is to initialize PCI IRQ line support and
+** virtualize pcidev->irq value. To be called by pci_fixup_bus().
+*/
+extern void *iosapic_register(unsigned long hpa, void __iomem *vaddr);
+extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev);
+
+#define LBA_FUNC_ID	0x0000	/* function id */
+#define LBA_FCLASS	0x0008	/* function class, bist, header, rev... */
+#define LBA_CAPABLE	0x0030	/* capabilities register */
+
+#define LBA_PCI_CFG_ADDR	0x0040	/* poke CFG address here */
+#define LBA_PCI_CFG_DATA	0x0048	/* read or write data here */
+
+#define LBA_PMC_MTLT	0x0050	/* Firmware sets this - read only. */
+#define LBA_FW_SCRATCH	0x0058	/* Firmware writes the PCI bus number here. */
+#define LBA_ERROR_ADDR	0x0070	/* On error, address gets logged here */
+
+#define LBA_ARB_MASK	0x0080	/* bit 0 enable arbitration. PAT/PDC enables */
+#define LBA_ARB_PRI	0x0088	/* firmware sets this. */
+#define LBA_ARB_MODE	0x0090	/* firmware sets this. */
+#define LBA_ARB_MTLT	0x0098	/* firmware sets this. */
+
+#define LBA_MOD_ID	0x0100	/* Module ID. PDC_PAT_CELL reports 4 */
+
+#define LBA_STAT_CTL	0x0108	/* Status & Control */
+#define   LBA_BUS_RESET		0x01	/*  Deassert PCI Bus Reset Signal */
+#define   CLEAR_ERRLOG		0x10	/*  "Clear Error Log" cmd */
+#define   CLEAR_ERRLOG_ENABLE	0x20	/*  "Clear Error Log" Enable */
+#define   HF_ENABLE	0x40	/*    enable HF mode (default is -1 mode) */
+
+#define LBA_LMMIO_BASE	0x0200	/* < 4GB I/O address range */
+#define LBA_LMMIO_MASK	0x0208
+
+#define LBA_GMMIO_BASE	0x0210	/* > 4GB I/O address range */
+#define LBA_GMMIO_MASK	0x0218
+
+#define LBA_WLMMIO_BASE	0x0220	/* All < 4GB ranges under the same *SBA* */
+#define LBA_WLMMIO_MASK	0x0228
+
+#define LBA_WGMMIO_BASE	0x0230	/* All > 4GB ranges under the same *SBA* */
+#define LBA_WGMMIO_MASK	0x0238
+
+#define LBA_IOS_BASE	0x0240	/* I/O port space for this LBA */
+#define LBA_IOS_MASK	0x0248
+
+#define LBA_ELMMIO_BASE	0x0250	/* Extra LMMIO range */
+#define LBA_ELMMIO_MASK	0x0258
+
+#define LBA_EIOS_BASE	0x0260	/* Extra I/O port space */
+#define LBA_EIOS_MASK	0x0268
+
+#define LBA_GLOBAL_MASK	0x0270	/* Mercury only: Global Address Mask */
+#define LBA_DMA_CTL	0x0278	/* firmware sets this */
+
+#define LBA_IBASE	0x0300	/* SBA DMA support */
+#define LBA_IMASK	0x0308
+
+/* FIXME: ignore DMA Hint stuff until we can measure performance */
+#define LBA_HINT_CFG	0x0310
+#define LBA_HINT_BASE	0x0380	/* 14 registers at every 8 bytes. */
+
+#define LBA_BUS_MODE	0x0620
+
+/* ERROR regs are needed for config cycle kluges */
+#define LBA_ERROR_CONFIG 0x0680
+#define     LBA_SMART_MODE 0x20
+#define LBA_ERROR_STATUS 0x0688
+#define LBA_ROPE_CTL     0x06A0
+
+#define LBA_IOSAPIC_BASE	0x800 /* Offset of IRQ logic */
+
+#endif /*_ASM_PARISC_ROPES_H_*/