Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 284 insertions, 0 deletions

diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
new file mode 100644
index 0000000000..cae31a6e8f
--- /dev/null
+++ b/arch/powerpc/boot/main.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+#include "reg.h"
+
+struct addr_range {
+	void *addr;
+	unsigned long size;
+};
+
+#undef DEBUG
+
+static struct addr_range prep_kernel(void)
+{
+	char elfheader[256];
+	unsigned char *vmlinuz_addr = (unsigned char *)_vmlinux_start;
+	unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
+	void *addr = 0;
+	struct elf_info ei;
+	long len;
+	int uncompressed_image = 0;
+
+	len = partial_decompress(vmlinuz_addr, vmlinuz_size,
+		elfheader, sizeof(elfheader), 0);
+	/* assume uncompressed data if -1 is returned */
+	if (len == -1) {
+		uncompressed_image = 1;
+		memcpy(elfheader, vmlinuz_addr, sizeof(elfheader));
+		printf("No valid compressed data found, assume uncompressed data\n\r");
+	}
+
+	if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei))
+		fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
+
+	if (platform_ops.image_hdr)
+		platform_ops.image_hdr(elfheader);
+
+	/* We need to alloc the memsize: gzip will expand the kernel
+	 * text/data, then possible rubbish we don't care about. But
+	 * the kernel bss must be claimed (it will be zero'd by the
+	 * kernel itself)
+	 */
+	printf("Allocating 0x%lx bytes for kernel...\n\r", ei.memsize);
+
+	if (platform_ops.vmlinux_alloc) {
+		addr = platform_ops.vmlinux_alloc(ei.memsize);
+	} else {
+		/*
+		 * Check if the kernel image (without bss) would overwrite the
+		 * bootwrapper. The device tree has been moved in fdt_init()
+		 * to an area allocated with malloc() (somewhere past _end).
+		 */
+		if ((unsigned long)_start < ei.loadsize)
+			fatal("Insufficient memory for kernel at address 0!"
+			       " (_start=%p, uncompressed size=%08lx)\n\r",
+			       _start, ei.loadsize);
+
+		if ((unsigned long)_end < ei.memsize)
+			fatal("The final kernel image would overwrite the "
+					"device tree\n\r");
+	}
+
+	if (uncompressed_image) {
+		memcpy(addr, vmlinuz_addr + ei.elfoffset, ei.loadsize);
+		printf("0x%lx bytes of uncompressed data copied\n\r",
+		       ei.loadsize);
+		goto out;
+	}
+
+	/* Finally, decompress the kernel */
+	printf("Decompressing (0x%p <- 0x%p:0x%p)...\n\r", addr,
+	       vmlinuz_addr, vmlinuz_addr+vmlinuz_size);
+
+	len = partial_decompress(vmlinuz_addr, vmlinuz_size,
+		addr, ei.loadsize, ei.elfoffset);
+
+	if (len < 0)
+		fatal("Decompression failed with error code %ld\n\r", len);
+
+	if (len != ei.loadsize)
+		 fatal("Decompression error: got 0x%lx bytes, expected 0x%lx.\n\r",
+			 len, ei.loadsize);
+
+	printf("Done! Decompressed 0x%lx bytes\n\r", len);
+out:
+	flush_cache(addr, ei.loadsize);
+
+	return (struct addr_range){addr, ei.memsize};
+}
+
+static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen,
+				     unsigned long initrd_addr,
+				     unsigned long initrd_size)
+{
+	/* If we have an image attached to us, it overrides anything
+	 * supplied by the loader. */
+	if (&_initrd_end > &_initrd_start) {
+		printf("Attached initrd image at 0x%p-0x%p\n\r",
+		       _initrd_start, _initrd_end);
+		initrd_addr = (unsigned long)_initrd_start;
+		initrd_size = _initrd_end - _initrd_start;
+	} else if (initrd_size > 0) {
+		printf("Using loader supplied ramdisk at 0x%lx-0x%lx\n\r",
+		       initrd_addr, initrd_addr + initrd_size);
+	}
+
+	/* If there's no initrd at all, we're done */
+	if (! initrd_size)
+		return (struct addr_range){0, 0};
+
+	/*
+	 * If the initrd is too low it will be clobbered when the
+	 * kernel relocates to its final location.  In this case,
+	 * allocate a safer place and move it.
+	 */
+	if (initrd_addr < vmlinux.size) {
+		void *old_addr = (void *)initrd_addr;
+
+		printf("Allocating 0x%lx bytes for initrd ...\n\r",
+		       initrd_size);
+		initrd_addr = (unsigned long)malloc(initrd_size);
+		if (! initrd_addr)
+			fatal("Can't allocate memory for initial "
+			       "ramdisk !\n\r");
+		printf("Relocating initrd 0x%lx <- 0x%p (0x%lx bytes)\n\r",
+		       initrd_addr, old_addr, initrd_size);
+		memmove((void *)initrd_addr, old_addr, initrd_size);
+	}
+
+	printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd_addr));
+
+	/* Tell the kernel initrd address via device tree */
+	setprop_val(chosen, "linux,initrd-start", (u32)(initrd_addr));
+	setprop_val(chosen, "linux,initrd-end", (u32)(initrd_addr+initrd_size));
+
+	return (struct addr_range){(void *)initrd_addr, initrd_size};
+}
+
+#ifdef __powerpc64__
+static void prep_esm_blob(struct addr_range vmlinux, void *chosen)
+{
+	unsigned long esm_blob_addr, esm_blob_size;
+
+	/* Do we have an ESM (Enter Secure Mode) blob? */
+	if (&_esm_blob_end <= &_esm_blob_start)
+		return;
+
+	printf("Attached ESM blob at 0x%p-0x%p\n\r",
+	       _esm_blob_start, _esm_blob_end);
+	esm_blob_addr = (unsigned long)_esm_blob_start;
+	esm_blob_size = _esm_blob_end - _esm_blob_start;
+
+	/*
+	 * If the ESM blob is too low it will be clobbered when the
+	 * kernel relocates to its final location.  In this case,
+	 * allocate a safer place and move it.
+	 */
+	if (esm_blob_addr < vmlinux.size) {
+		void *old_addr = (void *)esm_blob_addr;
+
+		printf("Allocating 0x%lx bytes for esm_blob ...\n\r",
+		       esm_blob_size);
+		esm_blob_addr = (unsigned long)malloc(esm_blob_size);
+		if (!esm_blob_addr)
+			fatal("Can't allocate memory for ESM blob !\n\r");
+		printf("Relocating ESM blob 0x%lx <- 0x%p (0x%lx bytes)\n\r",
+		       esm_blob_addr, old_addr, esm_blob_size);
+		memmove((void *)esm_blob_addr, old_addr, esm_blob_size);
+	}
+
+	/* Tell the kernel ESM blob address via device tree. */
+	setprop_val(chosen, "linux,esm-blob-start", (u32)(esm_blob_addr));
+	setprop_val(chosen, "linux,esm-blob-end", (u32)(esm_blob_addr + esm_blob_size));
+}
+#else
+static inline void prep_esm_blob(struct addr_range vmlinux, void *chosen) { }
+#endif
+
+/* A buffer that may be edited by tools operating on a zImage binary so as to
+ * edit the command line passed to vmlinux (by setting /chosen/bootargs).
+ * The buffer is put in it's own section so that tools may locate it easier.
+ */
+static char cmdline[BOOT_COMMAND_LINE_SIZE]
+	__attribute__((__section__("__builtin_cmdline")));
+
+static void prep_cmdline(void *chosen)
+{
+	unsigned int getline_timeout = 5000;
+	int v;
+	int n;
+
+	/* Wait-for-input time */
+	n = getprop(chosen, "linux,cmdline-timeout", &v, sizeof(v));
+	if (n == sizeof(v))
+		getline_timeout = v;
+
+	if (cmdline[0] == '\0')
+		getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1);
+
+	printf("\n\rLinux/PowerPC load: %s", cmdline);
+
+	/* If possible, edit the command line */
+	if (console_ops.edit_cmdline && getline_timeout)
+		console_ops.edit_cmdline(cmdline, BOOT_COMMAND_LINE_SIZE, getline_timeout);
+
+	printf("\n\r");
+
+	/* Put the command line back into the devtree for the kernel */
+	setprop_str(chosen, "bootargs", cmdline);
+}
+
+struct platform_ops platform_ops;
+struct dt_ops dt_ops;
+struct console_ops console_ops;
+struct loader_info loader_info;
+
+void start(void)
+{
+	struct addr_range vmlinux, initrd;
+	kernel_entry_t kentry;
+	unsigned long ft_addr = 0;
+	void *chosen;
+
+	/* Do this first, because malloc() could clobber the loader's
+	 * command line.  Only use the loader command line if a
+	 * built-in command line wasn't set by an external tool */
+	if ((loader_info.cmdline_len > 0) && (cmdline[0] == '\0'))
+		memmove(cmdline, loader_info.cmdline,
+			min(loader_info.cmdline_len, BOOT_COMMAND_LINE_SIZE-1));
+
+	if (console_ops.open && (console_ops.open() < 0))
+		exit();
+	if (platform_ops.fixups)
+		platform_ops.fixups();
+
+	printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r",
+	       _start, get_sp());
+
+	/* Ensure that the device tree has a /chosen node */
+	chosen = finddevice("/chosen");
+	if (!chosen)
+		chosen = create_node(NULL, "chosen");
+
+	vmlinux = prep_kernel();
+	initrd = prep_initrd(vmlinux, chosen,
+			     loader_info.initrd_addr, loader_info.initrd_size);
+	prep_esm_blob(vmlinux, chosen);
+	prep_cmdline(chosen);
+
+	printf("Finalizing device tree...");
+	if (dt_ops.finalize)
+		ft_addr = dt_ops.finalize();
+	if (ft_addr)
+		printf(" flat tree at 0x%lx\n\r", ft_addr);
+	else
+		printf(" using OF tree (promptr=%p)\n\r", loader_info.promptr);
+
+	if (console_ops.close)
+		console_ops.close();
+
+	kentry = (kernel_entry_t) vmlinux.addr;
+	if (ft_addr) {
+		if(platform_ops.kentry)
+			platform_ops.kentry(ft_addr, vmlinux.addr);
+		else
+			kentry(ft_addr, 0, NULL);
+	}
+	else
+		kentry((unsigned long)initrd.addr, initrd.size,
+		       loader_info.promptr);
+
+	/* console closed so printf in fatal below may not work */
+	fatal("Error: Linux kernel returned to zImage boot wrapper!\n\r");
+}