Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/xive-regs.h b/arch/powerpc/include/asm/xive-regs.h
new file mode 100644
index 0000000000..cf8bb6ac44
--- /dev/null
+++ b/arch/powerpc/include/asm/xive-regs.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016,2017 IBM Corporation.
+ */
+#ifndef _ASM_POWERPC_XIVE_REGS_H
+#define _ASM_POWERPC_XIVE_REGS_H
+
+/*
+ * "magic" Event State Buffer (ESB) MMIO offsets.
+ *
+ * Each interrupt source has a 2-bit state machine called ESB
+ * which can be controlled by MMIO. It's made of 2 bits, P and
+ * Q. P indicates that an interrupt is pending (has been sent
+ * to a queue and is waiting for an EOI). Q indicates that the
+ * interrupt has been triggered while pending.
+ *
+ * This acts as a coalescing mechanism in order to guarantee
+ * that a given interrupt only occurs at most once in a queue.
+ *
+ * When doing an EOI, the Q bit will indicate if the interrupt
+ * needs to be re-triggered.
+ *
+ * The following offsets into the ESB MMIO allow to read or
+ * manipulate the PQ bits. They must be used with an 8-bytes
+ * load instruction. They all return the previous state of the
+ * interrupt (atomically).
+ *
+ * Additionally, some ESB pages support doing an EOI via a
+ * store at 0 and some ESBs support doing a trigger via a
+ * separate trigger page.
+ */
+#define XIVE_ESB_STORE_EOI	0x400 /* Store */
+#define XIVE_ESB_LOAD_EOI	0x000 /* Load */
+#define XIVE_ESB_GET		0x800 /* Load */
+#define XIVE_ESB_SET_PQ_00	0xc00 /* Load */
+#define XIVE_ESB_SET_PQ_01	0xd00 /* Load */
+#define XIVE_ESB_SET_PQ_10	0xe00 /* Load */
+#define XIVE_ESB_SET_PQ_11	0xf00 /* Load */
+
+/*
+ * Load-after-store ordering
+ *
+ * Adding this offset to the load address will enforce
+ * load-after-store ordering. This is required to use StoreEOI.
+ */
+#define XIVE_ESB_LD_ST_MO	0x40 /* Load-after-store ordering */
+
+#define XIVE_ESB_VAL_P		0x2
+#define XIVE_ESB_VAL_Q		0x1
+#define XIVE_ESB_INVALID	0xFF
+
+/*
+ * Thread Management (aka "TM") registers
+ */
+
+/* TM register offsets */
+#define TM_QW0_USER		0x000 /* All rings */
+#define TM_QW1_OS		0x010 /* Ring 0..2 */
+#define TM_QW2_HV_POOL		0x020 /* Ring 0..1 */
+#define TM_QW3_HV_PHYS		0x030 /* Ring 0..1 */
+
+/* Byte offsets inside a QW             QW0 QW1 QW2 QW3 */
+#define TM_NSR			0x0  /*  +   +   -   +  */
+#define TM_CPPR			0x1  /*  -   +   -   +  */
+#define TM_IPB			0x2  /*  -   +   +   +  */
+#define TM_LSMFB		0x3  /*  -   +   +   +  */
+#define TM_ACK_CNT		0x4  /*  -   +   -   -  */
+#define TM_INC			0x5  /*  -   +   -   +  */
+#define TM_AGE			0x6  /*  -   +   -   +  */
+#define TM_PIPR			0x7  /*  -   +   -   +  */
+
+#define TM_WORD0		0x0
+#define TM_WORD1		0x4
+
+/*
+ * QW word 2 contains the valid bit at the top and other fields
+ * depending on the QW.
+ */
+#define TM_WORD2		0x8
+#define   TM_QW0W2_VU		PPC_BIT32(0)
+#define   TM_QW0W2_LOGIC_SERV	PPC_BITMASK32(1,31) // XX 2,31 ?
+#define   TM_QW1W2_VO		PPC_BIT32(0)
+#define   TM_QW1W2_HO           PPC_BIT32(1) /* P10 XIVE2 */
+#define   TM_QW1W2_OS_CAM	PPC_BITMASK32(8,31)
+#define   TM_QW2W2_VP		PPC_BIT32(0)
+#define   TM_QW2W2_HP           PPC_BIT32(1) /* P10 XIVE2 */
+#define   TM_QW2W2_POOL_CAM	PPC_BITMASK32(8,31)
+#define   TM_QW3W2_VT		PPC_BIT32(0)
+#define   TM_QW3W2_HT           PPC_BIT32(1) /* P10 XIVE2 */
+#define   TM_QW3W2_LP		PPC_BIT32(6)
+#define   TM_QW3W2_LE		PPC_BIT32(7)
+#define   TM_QW3W2_T		PPC_BIT32(31)
+
+/*
+ * In addition to normal loads to "peek" and writes (only when invalid)
+ * using 4 and 8 bytes accesses, the above registers support these
+ * "special" byte operations:
+ *
+ *   - Byte load from QW0[NSR] - User level NSR (EBB)
+ *   - Byte store to QW0[NSR] - User level NSR (EBB)
+ *   - Byte load/store to QW1[CPPR] and QW3[CPPR] - CPPR access
+ *   - Byte load from QW3[TM_WORD2] - Read VT||00000||LP||LE on thrd 0
+ *                                    otherwise VT||0000000
+ *   - Byte store to QW3[TM_WORD2] - Set VT bit (and LP/LE if present)
+ *
+ * Then we have all these "special" CI ops at these offset that trigger
+ * all sorts of side effects:
+ */
+#define TM_SPC_ACK_EBB		0x800	/* Load8 ack EBB to reg*/
+#define TM_SPC_ACK_OS_REG	0x810	/* Load16 ack OS irq to reg */
+#define TM_SPC_PUSH_USR_CTX	0x808	/* Store32 Push/Validate user context */
+#define TM_SPC_PULL_USR_CTX	0x808	/* Load32 Pull/Invalidate user context */
+#define TM_SPC_SET_OS_PENDING	0x812	/* Store8 Set OS irq pending bit */
+#define TM_SPC_PULL_OS_CTX	0x818	/* Load32/Load64 Pull/Invalidate OS context to reg */
+#define TM_SPC_PULL_POOL_CTX	0x828	/* Load32/Load64 Pull/Invalidate Pool context to reg*/
+#define TM_SPC_ACK_HV_REG	0x830	/* Load16 ack HV irq to reg */
+#define TM_SPC_PULL_USR_CTX_OL	0xc08	/* Store8 Pull/Inval usr ctx to odd line */
+#define TM_SPC_ACK_OS_EL	0xc10	/* Store8 ack OS irq to even line */
+#define TM_SPC_ACK_HV_POOL_EL	0xc20	/* Store8 ack HV evt pool to even line */
+#define TM_SPC_ACK_HV_EL	0xc30	/* Store8 ack HV irq to even line */
+/* XXX more... */
+
+/* NSR fields for the various QW ack types */
+#define TM_QW0_NSR_EB		PPC_BIT8(0)
+#define TM_QW1_NSR_EO		PPC_BIT8(0)
+#define TM_QW3_NSR_HE		PPC_BITMASK8(0,1)
+#define  TM_QW3_NSR_HE_NONE	0
+#define  TM_QW3_NSR_HE_POOL	1
+#define  TM_QW3_NSR_HE_PHYS	2
+#define  TM_QW3_NSR_HE_LSI	3
+#define TM_QW3_NSR_I		PPC_BIT8(2)
+#define TM_QW3_NSR_GRP_LVL	PPC_BIT8(3,7)
+
+#endif /* _ASM_POWERPC_XIVE_REGS_H */