Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

66 files changed, 9595 insertions, 0 deletions

diff --git a/arch/riscv/boot/.gitignore b/arch/riscv/boot/.gitignore
new file mode 100644
index 0000000000..e1bc507e8c
--- /dev/null
+++ b/arch/riscv/boot/.gitignore
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+Image
+Image.*
+loader
+loader.lds
+loader.bin
+vmlinuz*
+xipImage
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
new file mode 100644
index 0000000000..8e7fc0edf2
--- /dev/null
+++ b/arch/riscv/boot/Makefile
@@ -0,0 +1,77 @@
+#
+# arch/riscv/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2018, Anup Patel.
+# Author: Anup Patel <anup@brainfault.org>
+#
+# Based on the ia64 and arm64 boot/Makefile.
+#
+
+KCOV_INSTRUMENT := n
+
+OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS_loader.bin :=-O binary
+OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+targets := Image Image.* loader loader.o loader.lds loader.bin
+targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
+
+ifeq ($(CONFIG_XIP_KERNEL),y)
+
+quiet_cmd_mkxip = $(quiet_cmd_objcopy)
+cmd_mkxip = $(cmd_objcopy)
+
+$(obj)/xipImage: vmlinux FORCE
+	$(call if_changed,mkxip)
+	@$(kecho) '  Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
+
+endif
+
+ifdef CONFIG_RELOCATABLE
+vmlinux.relocs: vmlinux
+	@ (! [ -f vmlinux.relocs ] && echo "vmlinux.relocs can't be found, please remove vmlinux and try again") || true
+
+$(obj)/Image: vmlinux.relocs FORCE
+else
+$(obj)/Image: vmlinux FORCE
+endif
+	$(call if_changed,objcopy)
+
+$(obj)/Image.gz: $(obj)/Image FORCE
+	$(call if_changed,gzip)
+
+$(obj)/loader.o: $(src)/loader.S $(obj)/Image
+
+$(obj)/loader: $(obj)/loader.o $(obj)/Image $(obj)/loader.lds FORCE
+	$(Q)$(LD) -T $(obj)/loader.lds -o $@ $(obj)/loader.o
+
+$(obj)/Image.bz2: $(obj)/Image FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/Image.lz4: $(obj)/Image FORCE
+	$(call if_changed,lz4)
+
+$(obj)/Image.lzma: $(obj)/Image FORCE
+	$(call if_changed,lzma)
+
+$(obj)/Image.lzo: $(obj)/Image FORCE
+	$(call if_changed,lzo)
+
+$(obj)/Image.zst: $(obj)/Image FORCE
+	$(call if_changed,zstd)
+
+$(obj)/loader.bin: $(obj)/loader FORCE
+	$(call if_changed,objcopy)
+
+EFI_ZBOOT_PAYLOAD	:= Image
+EFI_ZBOOT_BFD_TARGET	:= elf$(BITS)-littleriscv
+EFI_ZBOOT_MACH_TYPE	:= RISCV$(BITS)
+
+include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
new file mode 100644
index 0000000000..f60a280abb
--- /dev/null
+++ b/arch/riscv/boot/dts/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += allwinner
+subdir-y += canaan
+subdir-y += microchip
+subdir-y += renesas
+subdir-y += sifive
+subdir-y += starfive
+subdir-y += thead
+
+obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
new file mode 100644
index 0000000000..87f70b1af6
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-dongshan-nezha-stu.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-mangopi-mq-pro.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
new file mode 100644
index 0000000000..9b03fca244
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+/ {
+	reg_vcc: vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_3v3: vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc>;
+	};
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc_3v3>;
+	vcc-pc-supply = <&reg_vcc_3v3>;
+	vcc-pd-supply = <&reg_vcc_3v3>;
+	vcc-pe-supply = <&reg_vcc_3v3>;
+	vcc-pf-supply = <&reg_vcc_3v3>;
+	vcc-pg-supply = <&reg_vcc_3v3>;
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
new file mode 100644
index 0000000000..8785de3c92
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+	model = "Dongshan Nezha STU";
+	compatible = "100ask,dongshan-nezha-stu", "allwinner,sun20i-d1";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+		};
+	};
+
+	reg_usbvbus: usbvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbvbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		enable-active-high;
+		vin-supply = <&reg_vcc>;
+	};
+
+	/*
+	 * This regulator is PWM-controlled, but the PWM controller is not
+	 * yet supported, so fix the regulator to its default voltage.
+	 */
+	reg_vdd_cpu: vdd-cpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&reg_vcc>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-0 = <&rgmii_pe_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_vcc_3v3>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb8_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+	usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+	usb0_vbus-supply = <&reg_usbvbus>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
new file mode 100644
index 0000000000..4df8ffb715
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv-86-panel.dtsi"
+
+/ {
+	model = "Sipeed Lichee RV 86 Panel (480p)";
+	compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv",
+		     "allwinner,sun20i-d1";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "focaltech,ft6236";
+		reg = <0x48>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 14 IRQ_TYPE_LEVEL_LOW>; /* PG14 */
+		iovcc-supply = <&reg_vcc_3v3>;
+		reset-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <480>;
+		vcc-supply = <&reg_vcc_3v3>;
+		wakeup-source;
+	};
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
new file mode 100644
index 0000000000..1874fc0535
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv-86-panel.dtsi"
+
+/ {
+	model = "Sipeed Lichee RV 86 Panel (720p)";
+	compatible = "sipeed,lichee-rv-86-panel-720p", "sipeed,lichee-rv",
+		     "allwinner,sun20i-d1";
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
new file mode 100644
index 0000000000..6cc7dd0c1a
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv.dts"
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &xr829;
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		#sound-dai-cells = <0>;
+	};
+
+	dmic-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DMIC";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "pdm";
+			frame-master = <&link0_cpu>;
+			bitclock-master = <&link0_cpu>;
+
+			link0_cpu: cpu {
+				sound-dai = <&dmic>;
+			};
+
+			link0_codec: codec {
+				sound-dai = <&dmic_codec>;
+			};
+		};
+	};
+
+	/* PC1 is repurposed as BT_WAKE_AP */
+	/delete-node/ leds;
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ccu CLK_FANOUT1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+		assigned-clocks = <&ccu CLK_FANOUT1>;
+		assigned-clock-rates = <32768>;
+		pinctrl-0 = <&clk_pg11_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&dmic {
+	pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-0 = <&rmii_pe_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&ext_rmii_phy>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_vcc_3v3>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+	};
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	xr829: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* XR829 bluetooth is connected here */
+};
+
+&usb_otg {
+	status = "disabled";
+};
+
+&usbphy {
+	/* PD20 and PD21 are repurposed for the LCD panel */
+	/delete-property/ usb0_id_det-gpios;
+	/delete-property/ usb0_vbus_det-gpios;
+	usb1_vbus-supply = <&reg_vcc>;
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
new file mode 100644
index 0000000000..52b91e1aff
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/input/input.h>
+
+#include "sun20i-d1-lichee-rv.dts"
+
+/ {
+	model = "Sipeed Lichee RV Dock";
+	compatible = "sipeed,lichee-rv-dock", "sipeed,lichee-rv",
+		     "allwinner,sun20i-d1";
+
+	aliases {
+		ethernet1 = &rtl8723ds;
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		#sound-dai-cells = <0>;
+	};
+
+	dmic-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DMIC";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "pdm";
+			frame-master = <&link0_cpu>;
+			bitclock-master = <&link0_cpu>;
+
+			link0_cpu: cpu {
+				sound-dai = <&dmic>;
+			};
+
+			link0_codec: codec {
+				sound-dai = <&dmic_codec>;
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dmic {
+	pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtl8723ds: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG16 */
+		enable-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+		host-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc>;
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
new file mode 100644
index 0000000000..d60a0562a8
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+	model = "Sipeed Lichee RV";
+	compatible = "sipeed,lichee-rv", "allwinner,sun20i-d1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+		};
+	};
+
+	reg_vdd_cpu: vdd-cpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&reg_vcc>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb8_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+	usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+	usb0_vbus-supply = <&reg_vcc>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
new file mode 100644
index 0000000000..f2e07043af
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+	model = "MangoPi MQ Pro";
+	compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1";
+
+	aliases {
+		ethernet0 = &rtl8723ds;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+		};
+	};
+
+	reg_avdd2v8: avdd2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_vcc_3v3>;
+	};
+
+	reg_dvdd: dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_vcc_3v3>;
+	};
+
+	reg_vdd_cpu: vdd-cpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&reg_vcc>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtl8723ds: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pe-supply = <&reg_avdd2v8>;
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb8_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+		enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */
+		host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
new file mode 100644
index 0000000000..4ed33c1e7c
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+/*
+ * gpio line names
+ *
+ * The Nezha-D1 has a 40-pin IO header. Some of these pins are routed
+ * directly to pads on the SoC, others come from an 8-bit pcf857x IO
+ * expander. Therefore, these line names are specified in two places:
+ * one set for the pcf857x, and one set for the pio controller.
+ *
+ * Lines which are routed to the 40-pin header are named as follows:
+ *	<pin#> [<pin name>]
+ * where:
+ *	<pin#>		is the actual pin number of the 40-pin header
+ *	<pin name>	is the name of the pin by function/gpio#
+ *
+ * For details regarding pin numbers and names see the schematics (under
+ * "IO EXPAND"):
+ * http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+	model = "Allwinner D1 Nezha";
+	compatible = "allwinner,d1-nezha", "allwinner,sun20i-d1";
+
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &xr829;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usbvbus: usbvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbvbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		enable-active-high;
+		vin-supply = <&reg_vcc>;
+	};
+
+	/*
+	 * This regulator is PWM-controlled, but the PWM controller is not
+	 * yet supported, so fix the regulator to its default voltage.
+	 */
+	reg_vdd_cpu: vdd-cpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&reg_vcc>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-0 = <&rgmii_pe_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_vcc_3v3>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcf8574a: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 2 IRQ_TYPE_LEVEL_LOW>; /* PB2 */
+		interrupt-controller;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-line-names =
+			"pin13 [gpio8]",
+			"pin16 [gpio10]",
+			"pin18 [gpio11]",
+			"pin26 [gpio17]",
+			"pin22 [gpio14]",
+			"pin28 [gpio19]",
+			"pin37 [gpio23]",
+			"pin11 [gpio6]";
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	xr829: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb8_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* XR829 bluetooth is connected here */
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+	usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+	usb0_vbus-supply = <&reg_usbvbus>;
+	usb1_vbus-supply = <&reg_vcc>;
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		/* Port A */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port B */
+		"pin5 [gpio2/twi2-sck]",
+		"pin3 [gpio1/twi2-sda]",
+		"",
+		"pin38 [gpio24/i2s2-din]",
+		"pin40 [gpio25/i2s2-dout]",
+		"pin12 [gpio7/i2s-clk]",
+		"pin35 [gpio22/i2s2-lrck]",
+		"",
+		"pin8 [gpio4/uart0-txd]",
+		"pin10 [gpio5/uart0-rxd]",
+		"",
+		"",
+		"pin15 [gpio9]",
+		"", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port C */
+		"",
+		"pin31 [gpio21]",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port D */
+		"", "", "", "", "", "", "", "",
+		"", "",
+		"pin24 [gpio16/spi1-ce0]",
+		"pin23 [gpio15/spi1-clk]",
+		"pin19 [gpio12/spi1-mosi]",
+		"pin21 [gpio13/spi1-miso]",
+		"pin27 [gpio18/spi1-hold]",
+		"pin29 [gpio20/spi1-wp]",
+		"", "", "", "", "", "",
+		"pin7 [gpio3/pwm]";
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
new file mode 100644
index 0000000000..97e7cbb325
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1s.dtsi"
+#include "sunxi-d1-t113.dtsi"
+
+/ {
+	soc {
+		lradc: keys@2009800 {
+			compatible = "allwinner,sun20i-d1-lradc",
+				     "allwinner,sun50i-r329-lradc";
+			reg = <0x2009800 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(61) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LRADC>;
+			resets = <&ccu RST_BUS_LRADC>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@2032000 {
+			compatible = "allwinner,sun20i-d1-i2s",
+				     "allwinner,sun50i-r329-i2s";
+			reg = <0x2032000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(26) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>,
+				 <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&pio {
+	/omit-if-no-ref/
+	dmic_pb11_d0_pin: dmic-pb11-d0-pin {
+		pins = "PB11";
+		function = "dmic";
+	};
+
+	/omit-if-no-ref/
+	dmic_pe17_clk_pin: dmic-pe17-clk-pin {
+		pins = "PE17";
+		function = "dmic";
+	};
+
+	/omit-if-no-ref/
+	i2c0_pb10_pins: i2c0-pb10-pins {
+		pins = "PB10", "PB11";
+		function = "i2c0";
+	};
+
+	/omit-if-no-ref/
+	i2c2_pb0_pins: i2c2-pb0-pins {
+		pins = "PB0", "PB1";
+		function = "i2c2";
+	};
+
+	/omit-if-no-ref/
+	uart0_pb8_pins: uart0-pb8-pins {
+		pins = "PB8", "PB9";
+		function = "uart0";
+	};
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
new file mode 100644
index 0000000000..e6d924f671
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1s.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+	model = "MangoPi MQ";
+	compatible = "widora,mangopi-mq", "allwinner,sun20i-d1s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	reg_avdd2v8: avdd2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_vcc_3v3>;
+	};
+
+	reg_dvdd: dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_vcc_3v3>;
+	};
+
+	reg_vcc_core: vcc-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&reg_vcc>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pe-supply = <&reg_avdd2v8>;
+};
+
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
new file mode 100644
index 0000000000..b868431259
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+#define SOC_PERIPHERAL_IRQ(nr)	(nr + 16)
+
+#include "sunxi-d1s-t113.dtsi"
+
+/ {
+	cpus {
+		timebase-frequency = <24000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "thead,c906", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_RISCV>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <256>;
+			d-cache-size = <32768>;
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			mmu-type = "riscv,sv39";
+			operating-points-v2 = <&opp_table_cpu>;
+			riscv,isa = "rv64imafdc";
+			#cooling-cells = <2>;
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	opp_table_cpu: opp-table-cpu {
+		compatible = "operating-points-v2";
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <900000 900000 1100000>;
+		};
+
+		opp-1080000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <900000 900000 1100000>;
+		};
+	};
+
+	soc {
+		interrupt-parent = <&plic>;
+
+		riscv_wdt: watchdog@6011000 {
+			compatible = "allwinner,sun20i-d1-wdt";
+			reg = <0x6011000 0x20>;
+			interrupts = <SOC_PERIPHERAL_IRQ(131) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcxo>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+		};
+
+		plic: interrupt-controller@10000000 {
+			compatible = "allwinner,sun20i-d1-plic",
+				     "thead,c900-plic";
+			reg = <0x10000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu0_intc 9>;
+			interrupt-controller;
+			riscv,ndev = <175>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi
new file mode 100644
index 0000000000..b7156123df
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+/ {
+	soc {
+		dsp_wdt: watchdog@1700400 {
+			compatible = "allwinner,sun20i-d1-wdt";
+			reg = <0x1700400 0x20>;
+			interrupts = <SOC_PERIPHERAL_IRQ(122) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcxo>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			status = "reserved";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
new file mode 100644
index 0000000000..822f022eec
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -0,0 +1,927 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/clock/sun20i-d1-ccu.h>
+#include <dt-bindings/clock/sun20i-d1-r-ccu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun20i-d1-ccu.h>
+#include <dt-bindings/reset/sun20i-d1-r-ccu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	dcxo: dcxo-clk {
+		compatible = "fixed-clock";
+		clock-output-names = "dcxo";
+		#clock-cells = <0>;
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun20i-d1-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		dma-noncoherent;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pio: pinctrl@2000000 {
+			compatible = "allwinner,sun20i-d1-pinctrl";
+			reg = <0x2000000 0x800>;
+			interrupts = <SOC_PERIPHERAL_IRQ(69) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(71) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(73) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(75) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(77) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(79) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0>,
+				 <&dcxo>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#gpio-cells = <3>;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			can0_pins: can0-pins {
+				pins = "PB2", "PB3";
+				function = "can0";
+			};
+
+			/omit-if-no-ref/
+			can1_pins: can1-pins {
+				pins = "PB4", "PB5";
+				function = "can1";
+			};
+
+			/omit-if-no-ref/
+			clk_pg11_pin: clk-pg11-pin {
+				pins = "PG11";
+				function = "clk";
+			};
+
+			/omit-if-no-ref/
+			dsi_4lane_pins: dsi-4lane-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+				       "PD6", "PD7", "PD8", "PD9";
+				drive-strength = <30>;
+				function = "dsi";
+			};
+
+			/omit-if-no-ref/
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+				       "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+				       "PD18", "PD19", "PD20", "PD21";
+				function = "lcd0";
+			};
+
+			/omit-if-no-ref/
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
+				function = "mmc1";
+			};
+
+			/omit-if-no-ref/
+			mmc2_pins: mmc2-pins {
+				pins = "PC2", "PC3", "PC4", "PC5", "PC6", "PC7";
+				function = "mmc2";
+			};
+
+			/omit-if-no-ref/
+			rgmii_pe_pins: rgmii-pe-pins {
+				pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+				       "PE5", "PE6", "PE7", "PE8", "PE9",
+				       "PE11", "PE12", "PE13", "PE14", "PE15";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			rmii_pe_pins: rmii-pe-pins {
+				pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+				       "PE5", "PE6", "PE7", "PE8", "PE9";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC2", "PC3", "PC4", "PC5";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pg6_pins: uart1-pg6-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_pg8_rts_cts_pins: uart1-pg8-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart3_pb_pins: uart3-pb-pins {
+				pins = "PB6", "PB7";
+				function = "uart3";
+			};
+		};
+
+		ccu: clock-controller@2001000 {
+			compatible = "allwinner,sun20i-d1-ccu";
+			reg = <0x2001000 0x1000>;
+			clocks = <&dcxo>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpadc: adc@2009000 {
+			compatible = "allwinner,sun20i-d1-gpadc";
+			reg = <0x2009000 0x400>;
+			clocks = <&ccu CLK_BUS_GPADC>;
+			resets = <&ccu RST_BUS_GPADC>;
+			interrupts = <SOC_PERIPHERAL_IRQ(57) IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#io-channel-cells = <1>;
+		};
+
+		dmic: dmic@2031000 {
+			compatible = "allwinner,sun20i-d1-dmic",
+				     "allwinner,sun50i-h6-dmic";
+			reg = <0x2031000 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(24) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMIC>,
+				 <&ccu CLK_DMIC>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_DMIC>;
+			dmas = <&dma 8>;
+			dma-names = "rx";
+			status = "disabled";
+			#sound-dai-cells = <0>;
+		};
+
+		i2s1: i2s@2033000 {
+			compatible = "allwinner,sun20i-d1-i2s",
+				     "allwinner,sun50i-r329-i2s";
+			reg = <0x2033000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(27) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>,
+				 <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#sound-dai-cells = <0>;
+		};
+
+		i2s2: i2s@2034000 {
+			compatible = "allwinner,sun20i-d1-i2s",
+				     "allwinner,sun50i-r329-i2s";
+			reg = <0x2034000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(28) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>,
+				 <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dmas = <&dma 5>, <&dma 5>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#sound-dai-cells = <0>;
+		};
+
+		timer: timer@2050000 {
+			compatible = "allwinner,sun20i-d1-timer",
+				     "allwinner,sun8i-a23-timer";
+			reg = <0x2050000 0xa0>;
+			interrupts = <SOC_PERIPHERAL_IRQ(59) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(60) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcxo>;
+		};
+
+		wdt: watchdog@20500a0 {
+			compatible = "allwinner,sun20i-d1-wdt-reset",
+				     "allwinner,sun20i-d1-wdt";
+			reg = <0x20500a0 0x20>;
+			interrupts = <SOC_PERIPHERAL_IRQ(63) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcxo>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			status = "reserved";
+		};
+
+		uart0: serial@2500000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x2500000 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 14>, <&dma 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@2500400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x2500400 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@2500800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x2500800 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@2500c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x2500c00 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 17>, <&dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart4: serial@2501000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x2501000 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			dmas = <&dma 18>, <&dma 18>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart5: serial@2501400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x2501400 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			dmas = <&dma 19>, <&dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@2502000 {
+			compatible = "allwinner,sun20i-d1-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502000 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(9) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2502400 {
+			compatible = "allwinner,sun20i-d1-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502400 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2502800 {
+			compatible = "allwinner,sun20i-d1-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502800 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(11) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@2502c00 {
+			compatible = "allwinner,sun20i-d1-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502c00 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(12) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@2504000 {
+			compatible = "allwinner,sun20i-d1-can";
+			reg = <0x02504000 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(21) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN0>;
+			resets = <&ccu RST_BUS_CAN0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&can0_pins>;
+			status = "disabled";
+		};
+
+		can1: can@2504400 {
+			compatible = "allwinner,sun20i-d1-can";
+			reg = <0x02504400 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(22) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN1>;
+			resets = <&ccu RST_BUS_CAN1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&can1_pins>;
+			status = "disabled";
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun20i-d1-system-control";
+			reg = <0x3000000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun20i-d1-dma";
+			reg = <0x3002000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(50) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			resets = <&ccu RST_BUS_DMA>;
+			dma-channels = <16>;
+			dma-requests = <48>;
+			#dma-cells = <1>;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun20i-d1-sid";
+			reg = <0x3006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		crypto: crypto@3040000 {
+			compatible = "allwinner,sun20i-d1-crypto";
+			reg = <0x3040000 0x800>;
+			interrupts = <SOC_PERIPHERAL_IRQ(52) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>,
+				 <&ccu CLK_CE>,
+				 <&ccu CLK_MBUS_CE>,
+				 <&rtc CLK_IOSC>;
+			clock-names = "bus", "mod", "ram", "trng";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		mbus: dram-controller@3102000 {
+			compatible = "allwinner,sun20i-d1-mbus";
+			reg = <0x3102000 0x1000>,
+			      <0x3103000 0x1000>;
+			reg-names = "mbus", "dram";
+			interrupts = <SOC_PERIPHERAL_IRQ(43) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			dma-ranges = <0 0x40000000 0x80000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun20i-d1-mmc";
+			reg = <0x4020000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			cap-sd-highspeed;
+			max-frequency = <150000000>;
+			no-mmc;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun20i-d1-mmc";
+			reg = <0x4021000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			cap-sd-highspeed;
+			max-frequency = <150000000>;
+			no-mmc;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun20i-d1-emmc",
+				     "allwinner,sun50i-a100-emmc";
+			reg = <0x4022000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(42) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			cap-mmc-highspeed;
+			max-frequency = <150000000>;
+			mmc-ddr-1_8v;
+			mmc-ddr-3_3v;
+			no-sd;
+			no-sdio;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@4025000 {
+			compatible = "allwinner,sun20i-d1-spi",
+				     "allwinner,sun50i-r329-spi";
+			reg = <0x04025000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@4026000 {
+			compatible = "allwinner,sun20i-d1-spi-dbi",
+				     "allwinner,sun50i-r329-spi-dbi",
+				     "allwinner,sun50i-r329-spi";
+			reg = <0x04026000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(16) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@4100000 {
+			compatible = "allwinner,sun20i-d1-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x4100000 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(29) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			extcon = <&usbphy 0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: phy@4100400 {
+			compatible = "allwinner,sun20i-d1-usb-phy";
+			reg = <0x4100400 0x100>,
+			      <0x4101800 0x100>,
+			      <0x4200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&dcxo>,
+				 <&dcxo>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@4101000 {
+			compatible = "allwinner,sun20i-d1-ehci",
+				     "generic-ehci";
+			reg = <0x4101000 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(30) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@4101400 {
+			compatible = "allwinner,sun20i-d1-ohci",
+				     "generic-ohci";
+			reg = <0x4101400 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(31) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@4200000 {
+			compatible = "allwinner,sun20i-d1-ehci",
+				     "generic-ehci";
+			reg = <0x4200000 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@4200400 {
+			compatible = "allwinner,sun20i-d1-ohci",
+				     "generic-ohci";
+			reg = <0x4200400 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		emac: ethernet@4500000 {
+			compatible = "allwinner,sun20i-d1-emac",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x4500000 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		display_clocks: clock-controller@5000000 {
+			compatible = "allwinner,sun20i-d1-de2-clk",
+				     "allwinner,sun50i-h5-de2-clk";
+			reg = <0x5000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@5100000 {
+			compatible = "allwinner,sun20i-d1-de2-mixer-0";
+			reg = <0x5100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus", "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon_top_mixer0: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@5200000 {
+			compatible = "allwinner,sun20i-d1-de2-mixer-1";
+			reg = <0x5200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus", "mod";
+			resets = <&display_clocks RST_MIXER1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+
+					mixer1_out_tcon_top_mixer1: endpoint {
+						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		dsi: dsi@5450000 {
+			compatible = "allwinner,sun20i-d1-mipi-dsi",
+				     "allwinner,sun50i-a100-mipi-dsi";
+			reg = <0x5450000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&tcon_top CLK_TCON_TOP_DSI>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+
+			port {
+				dsi_in_tcon_lcd0: endpoint {
+					remote-endpoint = <&tcon_lcd0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: phy@5451000 {
+			compatible = "allwinner,sun20i-d1-mipi-dphy",
+				     "allwinner,sun50i-a100-mipi-dphy";
+			reg = <0x5451000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_MIPI_DSI>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			#phy-cells = <0>;
+		};
+
+		tcon_top: tcon-top@5460000 {
+			compatible = "allwinner,sun20i-d1-tcon-top";
+			reg = <0x5460000 0x1000>;
+			clocks = <&ccu CLK_BUS_DPSS_TOP>,
+				 <&ccu CLK_TCON_TV>,
+				 <&ccu CLK_TVE>,
+				 <&ccu CLK_TCON_LCD0>;
+			clock-names = "bus", "tcon-tv0", "tve0", "dsi";
+			clock-output-names = "tcon-top-tv0", "tcon-top-dsi";
+			resets = <&ccu RST_BUS_DPSS_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer0>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer1_in: port@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					tcon_top_mixer1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_mixer1_out: port@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv0: endpoint {
+						remote-endpoint = <&tcon_tv0_out_tcon_top_hdmi>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		tcon_lcd0: lcd-controller@5461000 {
+			compatible = "allwinner,sun20i-d1-tcon-lcd";
+			reg = <0x5461000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(90) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_LCD0>,
+				 <&ccu CLK_TCON_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_TCON_LCD0>,
+				 <&ccu RST_BUS_LVDS0>;
+			reset-names = "lcd", "lvds";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_lcd0_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					tcon_lcd0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_lcd0>;
+					};
+
+					tcon_lcd0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_lcd0>;
+					};
+				};
+
+				tcon_lcd0_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					tcon_lcd0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon_lcd0>;
+					};
+				};
+			};
+		};
+
+		tcon_tv0: lcd-controller@5470000 {
+			compatible = "allwinner,sun20i-d1-tcon-tv";
+			reg = <0x5470000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(91) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV>,
+				 <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv0_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+					};
+
+					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+					};
+				};
+
+				tcon_tv0_out: port@1 {
+					reg = <1>;
+
+					tcon_tv0_out_tcon_top_hdmi: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+					};
+				};
+			};
+		};
+
+		ppu: power-controller@7001000 {
+			compatible = "allwinner,sun20i-d1-ppu";
+			reg = <0x7001000 0x1000>;
+			clocks = <&r_ccu CLK_BUS_R_PPU>;
+			resets = <&r_ccu RST_BUS_R_PPU>;
+			#power-domain-cells = <1>;
+		};
+
+		r_ccu: clock-controller@7010000 {
+			compatible = "allwinner,sun20i-d1-r-ccu";
+			reg = <0x7010000 0x400>;
+			clocks = <&dcxo>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0_DIV3>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@7090000 {
+			compatible = "allwinner,sun20i-d1-rtc",
+				     "allwinner,sun50i-r329-rtc";
+			reg = <0x7090000 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(144) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_RTC>,
+				 <&dcxo>,
+				 <&r_ccu CLK_R_AHB>;
+			clock-names = "bus", "hosc", "ahb";
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/canaan/Makefile b/arch/riscv/boot/dts/canaan/Makefile
new file mode 100644
index 0000000000..520623264c
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CANAAN) += canaan_kd233.dtb
+dtb-$(CONFIG_ARCH_CANAAN) += k210_generic.dtb
+dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_bit.dtb
+dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_dock.dtb
+dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_go.dtb
+dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maixduino.dtb
+
+obj-$(CONFIG_ARCH_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb.o, $(CONFIG_ARCH_CANAAN_K210_DTB_SOURCE))
diff --git a/arch/riscv/boot/dts/canaan/canaan_kd233.dts b/arch/riscv/boot/dts/canaan/canaan_kd233.dts
new file mode 100644
index 0000000000..8df4cf3656
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/canaan_kd233.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kendryte KD233";
+	compatible = "canaan,kendryte-kd233", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "KEY0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(6, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(7, K210_PCF_SPI0_SCLK)>, /* wr */
+			 <K210_FPIOA(8, K210_PCF_GPIOHS21)>;  /* dc */
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(9, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(10, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(11, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(12, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(13, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(14, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(15, K210_PCF_DVP_PCLK)>,
+			 <K210_FPIOA(17, K210_PCF_DVP_HSYNC)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(20, K210_PCF_GPIOHS4)>, /* Rot. dip sw line 8 */
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>, /* Rot. dip sw line 4 */
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>, /* Rot. dip sw line 2 */
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>, /* Rot. dip sw line 1 */
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(26, K210_PCF_GPIOHS10)>;
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(29, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(30, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(31, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>; /* cs */
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(33, K210_PCF_I2S0_IN_D0)>,
+			 <K210_FPIOA(34, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(35, K210_PCF_I2S0_SCLK)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "canaan,kd233-tft", "ilitek,ili9341";
+		reg = <0>;
+		dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <10000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
new file mode 100644
index 0000000000..f87c5164d9
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/k210.dtsi
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <dt-bindings/clock/k210-clk.h>
+#include <dt-bindings/pinctrl/k210-fpioa.h>
+#include <dt-bindings/reset/k210-rst.h>
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "canaan,kendryte-k210";
+
+	aliases {
+		serial0 = &uarths0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	/*
+	 * The K210 has an sv39 MMU following the privileged specification v1.9.
+	 * Since this is a non-ratified draft specification, the kernel does not
+	 * support it and the K210 support enabled only for the !MMU case.
+	 * Be consistent with this by setting the CPUs MMU type to "none".
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "canaan,k210", "riscv";
+			reg = <0>;
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,none";
+			i-cache-block-size = <64>;
+			i-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "canaan,k210", "riscv";
+			reg = <1>;
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,none";
+			i-cache-block-size = <64>;
+			i-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+	};
+
+	sram: memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x400000>, /* sram0 4 MiB */
+		      <0x80400000 0x200000>, /* sram1 2 MiB */
+		      <0x80600000 0x200000>; /* aisram 2 MiB */
+	};
+
+	sram_controller: memory-controller {
+		compatible = "canaan,k210-sram";
+		clocks = <&sysclk K210_CLK_SRAM0>,
+			 <&sysclk K210_CLK_SRAM1>,
+			 <&sysclk K210_CLK_AI>;
+		clock-names = "sram0", "sram1", "aisram";
+	};
+
+	clocks {
+		in0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		rom0: nvmem@1000 {
+			reg = <0x1000 0x1000>;
+			read-only;
+		};
+
+		clint0: timer@2000000 {
+			compatible = "canaan,k210-clint", "sifive,clint0";
+			reg = <0x2000000 0xC000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
+		};
+
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
+			reg = <0xC000000 0x4000000>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>;
+			riscv,ndev = <65>;
+		};
+
+		uarths0: serial@38000000 {
+			compatible = "canaan,k210-uarths", "sifive,uart0";
+			reg = <0x38000000 0x1000>;
+			interrupts = <33>;
+			clocks = <&sysclk K210_CLK_CPU>;
+		};
+
+		gpio0: gpio-controller@38001000 {
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+			compatible = "canaan,k210-gpiohs", "sifive,gpio0";
+			reg = <0x38001000 0x1000>;
+			interrupt-controller;
+			interrupts = <34>, <35>, <36>, <37>, <38>, <39>, <40>,
+				     <41>, <42>, <43>, <44>, <45>, <46>, <47>,
+				     <48>, <49>, <50>, <51>, <52>, <53>, <54>,
+				     <55>, <56>, <57>, <58>, <59>, <60>, <61>,
+				     <62>, <63>, <64>, <65>;
+			gpio-controller;
+			ngpios = <32>;
+		};
+
+		dmac0: dma-controller@50000000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x50000000 0x1000>;
+			interrupts = <27>, <28>, <29>, <30>, <31>, <32>;
+			#dma-cells = <1>;
+			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
+			clock-names = "core-clk", "cfgr-clk";
+			resets = <&sysrst K210_RST_DMA>;
+			dma-channels = <6>;
+			snps,dma-masters = <2>;
+			snps,priority = <0 1 2 3 4 5>;
+			snps,data-width = <5>;
+			snps,block-size = <0x200000 0x200000 0x200000
+					   0x200000 0x200000 0x200000>;
+			snps,axi-max-burst-len = <256>;
+		};
+
+		apb0: bus@50200000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges = <0x50200000 0x50200000 0x200000>;
+			clocks = <&sysclk K210_CLK_APB0>;
+
+			gpio1: gpio@50200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x50200000 0x80>;
+				clocks = <&sysclk K210_CLK_APB0>,
+					 <&sysclk K210_CLK_GPIO>;
+				clock-names = "bus", "db";
+				resets = <&sysrst K210_RST_GPIO>;
+
+				gpio1_0: gpio-port@0 {
+					#gpio-cells = <2>;
+					#interrupt-cells = <2>;
+					compatible = "snps,dw-apb-gpio-port";
+					reg = <0>;
+					interrupt-controller;
+					interrupts = <23>;
+					gpio-controller;
+					ngpios = <8>;
+				};
+			};
+
+			uart1: serial@50210000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50210000 0x100>;
+				interrupts = <11>;
+				clocks = <&sysclk K210_CLK_UART1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART1>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			uart2: serial@50220000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50220000 0x100>;
+				interrupts = <12>;
+				clocks = <&sysclk K210_CLK_UART2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART2>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			uart3: serial@50230000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50230000 0x100>;
+				interrupts = <13>;
+				clocks = <&sysclk K210_CLK_UART3>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART3>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			spi2: spi@50240000 {
+				compatible = "canaan,k210-spi";
+				spi-slave;
+				reg = <0x50240000 0x100>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupts = <3>;
+				clocks = <&sysclk K210_CLK_SPI2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI2>;
+			};
+
+			i2s0: i2s@50250000 {
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
+				reg = <0x50250000 0x200>;
+				interrupts = <5>;
+				clocks = <&sysclk K210_CLK_I2S0>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S0>;
+			};
+
+			i2s1: i2s@50260000 {
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
+				reg = <0x50260000 0x200>;
+				interrupts = <6>;
+				clocks = <&sysclk K210_CLK_I2S1>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S1>;
+			};
+
+			i2s2: i2s@50270000 {
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
+				reg = <0x50270000 0x200>;
+				interrupts = <7>;
+				clocks = <&sysclk K210_CLK_I2S2>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S2>;
+			};
+
+			i2c0: i2c@50280000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x50280000 0x100>;
+				interrupts = <8>;
+				clocks = <&sysclk K210_CLK_I2C0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C0>;
+			};
+
+			i2c1: i2c@50290000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x50290000 0x100>;
+				interrupts = <9>;
+				clocks = <&sysclk K210_CLK_I2C1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C1>;
+			};
+
+			i2c2: i2c@502a0000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x502A0000 0x100>;
+				interrupts = <10>;
+				clocks = <&sysclk K210_CLK_I2C2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C2>;
+			};
+
+			fpioa: pinmux@502b0000 {
+				compatible = "canaan,k210-fpioa";
+				reg = <0x502B0000 0x100>;
+				clocks = <&sysclk K210_CLK_FPIOA>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_FPIOA>;
+				canaan,k210-sysctl-power = <&sysctl 108>;
+			};
+
+			timer0: timer@502d0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502D0000 0x14>;
+				interrupts = <14>;
+				clocks = <&sysclk K210_CLK_TIMER0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER0>;
+			};
+
+			timer1: timer@502d0014 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502D0014 0x14>;
+				interrupts = <15>;
+				clocks = <&sysclk K210_CLK_TIMER0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER0>;
+			};
+
+			timer2: timer@502e0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502E0000 0x14>;
+				interrupts = <16>;
+				clocks = <&sysclk K210_CLK_TIMER1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER1>;
+			};
+
+			timer3: timer@502e0014 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502E0014 0x114>;
+				interrupts = <17>;
+				clocks = <&sysclk K210_CLK_TIMER1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER1>;
+			};
+
+			timer4: timer@502f0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502F0000 0x14>;
+				interrupts = <18>;
+				clocks = <&sysclk K210_CLK_TIMER2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER2>;
+			};
+
+			timer5: timer@502f0014 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502F0014 0x14>;
+				interrupts = <19>;
+				clocks = <&sysclk K210_CLK_TIMER2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER2>;
+			};
+		};
+
+		apb1: bus@50400000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges = <0x50400000 0x50400000 0x40100>;
+			clocks = <&sysclk K210_CLK_APB1>;
+
+			wdt0: watchdog@50400000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x50400000 0x100>;
+				interrupts = <21>;
+				clocks = <&sysclk K210_CLK_WDT0>,
+					 <&sysclk K210_CLK_APB1>;
+				clock-names = "tclk", "pclk";
+				resets = <&sysrst K210_RST_WDT0>;
+			};
+
+			wdt1: watchdog@50410000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x50410000 0x100>;
+				interrupts = <22>;
+				clocks = <&sysclk K210_CLK_WDT1>,
+					 <&sysclk K210_CLK_APB1>;
+				clock-names = "tclk", "pclk";
+				resets = <&sysrst K210_RST_WDT1>;
+			};
+
+			sysctl: syscon@50440000 {
+				compatible = "canaan,k210-sysctl",
+					     "syscon", "simple-mfd";
+				reg = <0x50440000 0x100>;
+				clocks = <&sysclk K210_CLK_APB1>;
+				clock-names = "pclk";
+
+				sysclk: clock-controller {
+					#clock-cells = <1>;
+					compatible = "canaan,k210-clk";
+					clocks = <&in0>;
+				};
+
+				sysrst: reset-controller {
+					compatible = "canaan,k210-rst";
+					#reset-cells = <1>;
+				};
+
+				reboot: syscon-reboot {
+					compatible = "syscon-reboot";
+					regmap = <&sysctl>;
+					offset = <48>;
+					mask = <1>;
+					value = <1>;
+				};
+			};
+		};
+
+		apb2: bus@52000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges = <0x52000000 0x52000000 0x2000200>;
+			clocks = <&sysclk K210_CLK_APB2>;
+
+			spi0: spi@52000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "canaan,k210-spi";
+				reg = <0x52000000 0x100>;
+				interrupts = <1>;
+				clocks = <&sysclk K210_CLK_SPI0>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI0>;
+				reset-names = "spi";
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+
+			spi1: spi@53000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "canaan,k210-spi";
+				reg = <0x53000000 0x100>;
+				interrupts = <2>;
+				clocks = <&sysclk K210_CLK_SPI1>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI1>;
+				reset-names = "spi";
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+
+			spi3: spi@54000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwc-ssi-1.01a";
+				reg = <0x54000000 0x200>;
+				interrupts = <4>;
+				clocks = <&sysclk K210_CLK_SPI3>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI3>;
+				reset-names = "spi";
+
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/canaan/k210_generic.dts b/arch/riscv/boot/dts/canaan/k210_generic.dts
new file mode 100644
index 0000000000..396c8ca4d2
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/k210_generic.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kendryte K210 generic";
+	compatible = "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pins: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pins: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts
new file mode 100644
index 0000000000..6d25bf0748
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX BiT";
+	compatible = "sipeed,maix-bit", "sipeed,maix-bitm",
+		     "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-names = "default";
+	pinctrl-0 = <&jtag_pinctrl>;
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>,
+			 <K210_FPIOA(10, K210_PCF_GPIO2)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		spi-cs-high;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};
diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts
new file mode 100644
index 0000000000..f4f4d8d5e8
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX Dock";
+	compatible = "sipeed,maix-dock-m1", "sipeed,maix-dock-m1w",
+		     "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/*
+		 * Note: the board wiring drawing documents green on
+		 * gpio #4, red on gpio #5 and blue on gpio #6. However,
+		 * the board is actually wired differently as defined here.
+		 */
+		led0 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(9, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(10, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 0>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};
diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts
new file mode 100644
index 0000000000..0d86df47e1
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX GO";
+	compatible = "sipeed,maix-go", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-up {
+			label = "UP";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1_0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		key-press {
+			label = "PRESS";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-down {
+			label = "DOWN";
+			linux,code = <BTN_2>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>,
+			 <K210_FPIOA(10, K210_PCF_GPIO2)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};
diff --git a/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts b/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts
new file mode 100644
index 0000000000..5c05c498e2
--- /dev/null
+++ b/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SiPeed MAIXDUINO";
+	compatible = "sipeed,maixduino", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fpioa {
+	status = "okay";
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,  /* BOOT */
+			 <K210_FPIOA(21, K210_PCF_GPIOHS2)>,  /* Header "2" */
+			 <K210_FPIOA(22, K210_PCF_GPIOHS3)>,  /* Header "3" */
+			 <K210_FPIOA(23, K210_PCF_GPIOHS4)>,  /* Header "4" */
+			 <K210_FPIOA(24, K210_PCF_GPIOHS5)>,  /* Header "5" */
+			 <K210_FPIOA(32, K210_PCF_GPIOHS6)>,  /* Header "6" */
+			 <K210_FPIOA(15, K210_PCF_GPIOHS7)>,  /* Header "7" */
+			 <K210_FPIOA(14, K210_PCF_GPIOHS8)>,  /* Header "8" */
+			 <K210_FPIOA(13, K210_PCF_GPIOHS9)>,  /* Header "9" */
+			 <K210_FPIOA(12, K210_PCF_GPIOHS10)>, /* Header "10" */
+			 <K210_FPIOA(11, K210_PCF_GPIOHS11)>, /* Header "11" */
+			 <K210_FPIOA(10, K210_PCF_GPIOHS12)>, /* Header "12" */
+			 <K210_FPIOA(3,  K210_PCF_GPIOHS13)>; /* Header "13" */
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIO2)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>, /* Header "scl" */
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;  /* Header "sda" */
+	};
+
+	i2s1_pinctrl: i2s1-pinmux {
+		pinmux = <K210_FPIOA(33, K210_PCF_I2S1_WS)>,
+			 <K210_FPIOA(34, K210_PCF_I2S1_IN_D0)>,
+			 <K210_FPIOA(35, K210_PCF_I2S1_SCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 0>;
+		spi-max-frequency = <15000000>;
+		power-supply = <&vcc_3v3>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
new file mode 100644
index 0000000000..45adc4926e
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-tysom-m.dtb
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
new file mode 100644
index 0000000000..1069134f2e
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/ {
+	compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+		     "microchip,mpfs";
+
+	core_pwm0: pwm@40000000 {
+		compatible = "microchip,corepwm-rtl-v4";
+		reg = <0x0 0x40000000 0x0 0xF0>;
+		microchip,sync-update-mask = /bits/ 32 <0>;
+		#pwm-cells = <3>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@40000200 {
+		compatible = "microchip,corei2c-rtl-v7";
+		reg = <0x0 0x40000200 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
+		interrupt-parent = <&plic>;
+		interrupts = <122>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	pcie: pcie@3000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, <&ccc_nw CLK_CCC_PLL0_OUT3>;
+		clock-names = "fic1", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>;
+		dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
+
+	refclk_ccc: cccrefclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
+
+&ccc_nw {
+	clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+		 <&refclk_ccc>, <&refclk_ccc>;
+	clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+		      "dll0_ref", "dll1_ref";
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
new file mode 100644
index 0000000000..90b2611147
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define RTCCLK_FREQ		1000000
+
+/ {
+	model = "Microchip PolarFire-SoC Icicle Kit";
+	compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+		     "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <RTCCLK_FREQ>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led1";
+		};
+
+		led-2 {
+			gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led2";
+		};
+
+		led-3 {
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led3";
+		};
+
+		led-4 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led4";
+		};
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+		status = "okay";
+	};
+
+	ddrc_cache_hi: memory@1040000000 {
+		device_type = "memory";
+		reg = <0x10 0x40000000 0x0 0x40000000>;
+		status = "okay";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hss_payload: region@BFC00000 {
+			reg = <0x0 0xBFC00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&core_pwm0 {
+	status = "okay";
+};
+
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	status = "okay";
+
+	phy1: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	phy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+	clock-frequency = <50000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
new file mode 100644
index 0000000000..8230f06ddf
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <62500000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	pcie: pcie@2000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
new file mode 100644
index 0000000000..184cb36a17
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Original all-in-one devicetree:
+ * Copyright (C) 2021-2022 - Wolfgang Grandegger <wg@aries-embedded.de>
+ * Rewritten to use includes:
+ * Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com>
+ */
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-m100pfs-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ	1000000
+
+/ {
+	model = "Aries Embedded M100PFEVPS";
+	compatible = "aries,m100pfsevp", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+		gpio0 = &gpio0;
+		gpio1 = &gpio2;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+	ddrc_cache_hi: memory@1040000000 {
+		device_type = "memory";
+		reg = <0x10 0x40000000 0x0 0x40000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&gpio0 {
+	interrupts = <13>, <14>, <15>, <16>,
+		     <17>, <18>, <19>, <20>,
+		     <21>, <22>, <23>, <24>,
+		     <25>, <26>;
+	ngpios = <14>;
+	status = "okay";
+
+	pmic-irq-hog {
+		gpio-hog;
+		gpios = <13 0>;
+		input;
+	};
+
+	/* Set to low for eMMC, high for SD-card */
+	mmc-sel-hog {
+		gpio-hog;
+		gpios = <12 0>;
+		output-high;
+	};
+};
+
+&gpio2 {
+	interrupts = <13>, <14>, <15>, <16>,
+		     <17>, <18>, <19>, <20>,
+		     <21>, <22>, <23>, <24>,
+		     <25>, <26>, <27>, <28>,
+		     <29>, <30>, <31>, <32>,
+		     <33>, <34>, <35>, <36>,
+		     <37>, <38>, <39>, <40>,
+		     <41>, <42>, <43>, <44>;
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mac1 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy1>;
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	no-1-8-v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
new file mode 100644
index 0000000000..9a56de7b91
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2022 Microchip Technology Inc */
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <62500000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	pcie: pcie@2000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts
new file mode 100644
index 0000000000..c87cc2d8fe
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2022 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-polarberry-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ	1000000
+
+/ {
+	model = "Sundance PolarBerry";
+	compatible = "sundance,polarberry", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac1;
+		serial0 = &mmuart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x2e000000>;
+	};
+
+	ddrc_cache_hi: memory@1000000000 {
+		device_type = "memory";
+		reg = <0x10 0x00000000 0x0 0xC0000000>;
+	};
+};
+
+/*
+ * phy0 is connected to mac0, but the port itself is on the (optional) carrier
+ * board.
+ */
+&mac0 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	status = "disabled";
+};
+
+&mac1 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	status = "okay";
+
+	phy1: ethernet-phy@5 {
+		reg = <5>;
+	};
+
+	phy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&mmuart0 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
new file mode 100644
index 0000000000..39a77df489
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts
new file mode 100644
index 0000000000..013cb666c7
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-sev-kit-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ		1000000
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Microchip PolarFire-SoC SEV Kit";
+	compatible = "microchip,mpfs-sev-kit", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		fabricbuf0ddrc: buffer@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x2000000>;
+		};
+
+		fabricbuf1ddrnc: buffer@c4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xc4000000 0x0 0x4000000>;
+		};
+
+		fabricbuf2ddrncwcb: buffer@d4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xd4000000 0x0 0x4000000>;
+		};
+	};
+
+	ddrc_cache: memory@1000000000 {
+		device_type = "memory";
+		reg = <0x10 0x0 0x0 0x76000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	phy1: ethernet-phy@9 {
+		reg = <9>;
+	};
+	phy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&mac1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	status = "okay";
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
new file mode 100644
index 0000000000..98f642e83a
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+// #include "dt-bindings/mailbox/miv-ihc.h"
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <62500000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
new file mode 100644
index 0000000000..e0797c7e1b
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Original all-in-one devicetree:
+ * Copyright (C) 2020-2022 - Aldec
+ * Rewritten to use includes:
+ * Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com>
+ */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-tysom-m-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ		1000000
+
+/ {
+	model = "Aldec TySOM-M-MPFS250T-REV2";
+	compatible = "aldec,tysom-m-mpfs250t-rev2", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+		gpio0 = &gpio0;
+		gpio1 = &gpio2;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x30000000>;
+		status = "okay";
+	};
+
+	ddrc_cache_hi: memory@1000000000 {
+		device_type = "memory";
+		reg = <0x10 0x00000000 0x0 0x40000000>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led0 {
+			gpios = <&gpio1 23 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	hwmon: hwmon@45 {
+		status = "okay";
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+};
+
+&gpio1 {
+	interrupts = <27>, <28>, <29>, <30>,
+		     <31>, <32>, <33>, <47>,
+		     <35>, <36>, <37>, <38>,
+		     <39>, <40>, <41>, <42>,
+		     <43>, <44>, <45>, <46>,
+		     <47>, <48>, <49>, <50>;
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+
+};
+
+&mac1 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy1>;
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	no-1-8-v;
+	disable-wp;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
new file mode 100644
index 0000000000..104504352e
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/dts-v1/;
+#include "dt-bindings/clock/microchip,mpfs-clock.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Microchip PolarFire SoC";
+	compatible = "microchip,mpfs";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "sifive,e51", "sifive,rocket0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			reg = <0>;
+			riscv,isa = "rv64imac";
+			clocks = <&clkcfg CLK_CPU>;
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <1>;
+			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
+			tlb-split;
+			next-level-cache = <&cctrllr>;
+			status = "okay";
+
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu2: cpu@2 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <2>;
+			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
+			tlb-split;
+			next-level-cache = <&cctrllr>;
+			status = "okay";
+
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu3: cpu@3 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <3>;
+			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
+			tlb-split;
+			next-level-cache = <&cctrllr>;
+			status = "okay";
+
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu4: cpu@4 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <4>;
+			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
+			tlb-split;
+			next-level-cache = <&cctrllr>;
+			status = "okay";
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+			};
+		};
+	};
+
+	refclk: mssrefclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	syscontroller: syscontroller {
+		compatible = "microchip,mpfs-sys-controller";
+		mboxes = <&mbox 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		cctrllr: cache-controller@2010000 {
+			compatible = "microchip,mpfs-ccache", "sifive,fu540-c000-ccache", "cache";
+			reg = <0x0 0x2010000 0x0 0x1000>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <1024>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic>;
+			interrupts = <1>, <3>, <4>, <2>;
+		};
+
+		clint: clint@2000000 {
+			compatible = "sifive,fu540-c000-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0xC000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			riscv,ndev = <186>;
+		};
+
+		pdma: dma-controller@3000000 {
+			compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+			reg = <0x0 0x3000000 0x0 0x8000>;
+			interrupt-parent = <&plic>;
+			interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
+			dma-channels = <4>;
+			#dma-cells = <1>;
+		};
+
+		clkcfg: clkcfg@20002000 {
+			compatible = "microchip,mpfs-clkcfg";
+			reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
+			clocks = <&refclk>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ccc_se: clock-controller@38010000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
+			      <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_ne: clock-controller@38040000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>,
+			      <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_nw: clock-controller@38100000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>,
+			      <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		ccc_sw: clock-controller@38400000 {
+			compatible = "microchip,mpfs-ccc";
+			reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>,
+			      <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		mmuart0: serial@20000000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20000000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <90>;
+			current-speed = <115200>;
+			clocks = <&clkcfg CLK_MMUART0>;
+			status = "disabled"; /* Reserved for the HSS */
+		};
+
+		mmuart1: serial@20100000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20100000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <91>;
+			current-speed = <115200>;
+			clocks = <&clkcfg CLK_MMUART1>;
+			status = "disabled";
+		};
+
+		mmuart2: serial@20102000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20102000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <92>;
+			current-speed = <115200>;
+			clocks = <&clkcfg CLK_MMUART2>;
+			status = "disabled";
+		};
+
+		mmuart3: serial@20104000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20104000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <93>;
+			current-speed = <115200>;
+			clocks = <&clkcfg CLK_MMUART3>;
+			status = "disabled";
+		};
+
+		mmuart4: serial@20106000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20106000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <94>;
+			clocks = <&clkcfg CLK_MMUART4>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		/* Common node entry for emmc/sd */
+		mmc: mmc@20008000 {
+			compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
+			reg = <0x0 0x20008000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <88>;
+			clocks = <&clkcfg CLK_MMC>;
+			max-frequency = <200000000>;
+			status = "disabled";
+		};
+
+		spi0: spi@20108000 {
+			compatible = "microchip,mpfs-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20108000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <54>;
+			clocks = <&clkcfg CLK_SPI0>;
+			status = "disabled";
+		};
+
+		spi1: spi@20109000 {
+			compatible = "microchip,mpfs-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20109000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <55>;
+			clocks = <&clkcfg CLK_SPI1>;
+			status = "disabled";
+		};
+
+		qspi: spi@21000000 {
+			compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21000000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <85>;
+			clocks = <&clkcfg CLK_QSPI>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2010a000 {
+			compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+			reg = <0x0 0x2010a000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&plic>;
+			interrupts = <58>;
+			clocks = <&clkcfg CLK_I2C0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010b000 {
+			compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+			reg = <0x0 0x2010b000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&plic>;
+			interrupts = <61>;
+			clocks = <&clkcfg CLK_I2C1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		can0: can@2010c000 {
+			compatible = "microchip,mpfs-can";
+			reg = <0x0 0x2010c000 0x0 0x1000>;
+			clocks = <&clkcfg CLK_CAN0>;
+			interrupt-parent = <&plic>;
+			interrupts = <56>;
+			status = "disabled";
+		};
+
+		can1: can@2010d000 {
+			compatible = "microchip,mpfs-can";
+			reg = <0x0 0x2010d000 0x0 0x1000>;
+			clocks = <&clkcfg CLK_CAN1>;
+			interrupt-parent = <&plic>;
+			interrupts = <57>;
+			status = "disabled";
+		};
+
+		mac0: ethernet@20110000 {
+			compatible = "microchip,mpfs-macb", "cdns,macb";
+			reg = <0x0 0x20110000 0x0 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&plic>;
+			interrupts = <64>, <65>, <66>, <67>, <68>, <69>;
+			local-mac-address = [00 00 00 00 00 00];
+			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
+			clock-names = "pclk", "hclk";
+			resets = <&clkcfg CLK_MAC0>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@20112000 {
+			compatible = "microchip,mpfs-macb", "cdns,macb";
+			reg = <0x0 0x20112000 0x0 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&plic>;
+			interrupts = <70>, <71>, <72>, <73>, <74>, <75>;
+			local-mac-address = [00 00 00 00 00 00];
+			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
+			clock-names = "pclk", "hclk";
+			resets = <&clkcfg CLK_MAC1>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@20120000 {
+			compatible = "microchip,mpfs-gpio";
+			reg = <0x0 0x20120000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clocks = <&clkcfg CLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@20121000 {
+			compatible = "microchip,mpfs-gpio";
+			reg = <0x0 0x20121000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clocks = <&clkcfg CLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio2: gpio@20122000 {
+			compatible = "microchip,mpfs-gpio";
+			reg = <0x0 0x20122000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clocks = <&clkcfg CLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rtc: rtc@20124000 {
+			compatible = "microchip,mpfs-rtc";
+			reg = <0x0 0x20124000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <80>, <81>;
+			clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
+			clock-names = "rtc", "rtcref";
+			status = "disabled";
+		};
+
+		usb: usb@20201000 {
+			compatible = "microchip,mpfs-musb";
+			reg = <0x0 0x20201000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <86>, <87>;
+			clocks = <&clkcfg CLK_USB>;
+			interrupt-names = "dma","mc";
+			status = "disabled";
+		};
+
+		mbox: mailbox@37020000 {
+			compatible = "microchip,mpfs-mailbox";
+			reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
+			      <0x0 0x37020800 0x0 0x100>;
+			interrupt-parent = <&plic>;
+			interrupts = <96>;
+			#mbox-cells = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/renesas/Makefile b/arch/riscv/boot/dts/renesas/Makefile
new file mode 100644
index 0000000000..2d3f5751a6
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043f01-smarc.dtb
diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
new file mode 100644
index 0000000000..6ec1c6f9a4
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define SOC_PERIPHERAL_IRQ(nr)	(nr + 32)
+
+#include <arm64/renesas/r9a07g043.dtsi>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <12000000>;
+
+		cpu0: cpu@0 {
+			compatible = "andestech,ax45mp", "riscv";
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			reg = <0x0>;
+			status = "okay";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,sv39";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <0x40>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <0x40>;
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+};
+
+&soc {
+	interrupt-parent = <&plic>;
+
+	plic: interrupt-controller@12c00000 {
+		compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		riscv,ndev = <511>;
+		interrupt-controller;
+		reg = <0x0 0x12c00000 0 0x400000>;
+		clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
+		power-domains = <&cpg>;
+		resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
+		interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
+	};
+};
diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts
new file mode 100644
index 0000000000..2aa8515451
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(0: uSD; 1: eMMC)
+ * SW1-3 : SW_ET0_EN_N		(0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
+ * Please change below macros according to SW1 setting on the SoM
+ */
+#define SW_SW0_DEV_SEL	1
+#define SW_ET0_EN_N	1
+
+#include "r9a07g043f.dtsi"
+#include "rzfive-smarc-som.dtsi"
+#include "rzfive-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g043f01";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g043f01", "renesas,r9a07g043";
+};
diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
new file mode 100644
index 0000000000..c62debc7ca
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK SOM
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <arm64/renesas/rzg2ul-smarc-som.dtsi>
+
+/ {
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+	};
+};
+
+&dmac {
+	status = "disabled";
+};
+
+#if (!SW_ET0_EN_N)
+&eth0 {
+	status = "disabled";
+
+	phy0: ethernet-phy@7 {
+		/delete-property/ interrupt-parent;
+		/delete-property/ interrupts;
+	};
+};
+#endif
+
+&eth1 {
+	status = "disabled";
+
+	phy1: ethernet-phy@7 {
+		/delete-property/ interrupt-parent;
+		/delete-property/ interrupts;
+	};
+};
+
+&sdhi0 {
+	status = "disabled";
+};
diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi
new file mode 100644
index 0000000000..c07a487c4e
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SMARC EVK carrier board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <arm64/renesas/rzg2ul-smarc.dtsi>
+
+&ehci0 {
+	status = "disabled";
+};
+
+&ehci1 {
+	status = "disabled";
+};
+
+&hsusb {
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "disabled";
+};
+
+&ohci1 {
+	status = "disabled";
+};
+
+&phyrst {
+	status = "disabled";
+};
+
+&sdhi1 {
+	status = "disabled";
+};
+
+&snd_rzg2l {
+	status = "disabled";
+};
+
+&spi1 {
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "disabled";
+};
+
+&usb0_vbus_otg {
+	status = "disabled";
+};
+
+&usb2_phy0 {
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	status = "disabled";
+};
+
+&vccq_sdhi1 {
+	status = "disabled";
+};
diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile
new file mode 100644
index 0000000000..6a5fbd4ed9
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SIFIVE) += hifive-unleashed-a00.dtb \
+			     hifive-unmatched-a00.dtb
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
new file mode 100644
index 0000000000..24bba83bec
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2018-2019 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu540-prci.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "sifive,fu540-c000", "sifive,fu540";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			compatible = "sifive,e51", "sifive,rocket0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			reg = <0>;
+			riscv,isa = "rv64imac";
+			status = "disabled";
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu1: cpu@1 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <1>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			next-level-cache = <&l2cache>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu2: cpu@2 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <2>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			next-level-cache = <&l2cache>;
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu3: cpu@3 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <3>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			next-level-cache = <&l2cache>;
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu4: cpu@4 {
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <4>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			next-level-cache = <&l2cache>;
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+			};
+		};
+	};
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+		plic0: interrupt-controller@c000000 {
+			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
+			riscv,ndev = <53>;
+		};
+		prci: clock-controller@10000000 {
+			compatible = "sifive,fu540-c000-prci";
+			reg = <0x0 0x10000000 0x0 0x1000>;
+			clocks = <&hfclk>, <&rtcclk>;
+			#clock-cells = <1>;
+		};
+		uart0: serial@10010000 {
+			compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10010000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <4>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			status = "disabled";
+		};
+		dma: dma-controller@3000000 {
+			compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+			reg = <0x0 0x3000000 0x0 0x8000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>;
+			dma-channels = <4>;
+			#dma-cells = <1>;
+		};
+		uart1: serial@10011000 {
+			compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10011000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <5>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			status = "disabled";
+		};
+		i2c0: i2c@10030000 {
+			compatible = "sifive,fu540-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10030000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <50>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi0: spi@10040000 {
+			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10040000 0x0 0x1000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <51>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi1: spi@10041000 {
+			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10041000 0x0 0x1000>,
+			      <0x0 0x30000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <52>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi2: spi@10050000 {
+			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10050000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <6>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		eth0: ethernet@10090000 {
+			compatible = "sifive,fu540-c000-gem";
+			interrupt-parent = <&plic0>;
+			interrupts = <53>;
+			reg = <0x0 0x10090000 0x0 0x2000>,
+			      <0x0 0x100a0000 0x0 0x1000>;
+			local-mac-address = [00 00 00 00 00 00];
+			clock-names = "pclk", "hclk";
+			clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>,
+				 <&prci FU540_PRCI_CLK_GEMGXLPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		pwm0: pwm@10020000 {
+			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10020000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <42>, <43>, <44>, <45>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		pwm1: pwm@10021000 {
+			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10021000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <46>, <47>, <48>, <49>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		l2cache: cache-controller@2010000 {
+			compatible = "sifive,fu540-c000-ccache", "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <1024>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic0>;
+			interrupts = <1>, <2>, <3>;
+			reg = <0x0 0x2010000 0x0 0x1000>;
+		};
+		gpio: gpio@10060000 {
+			compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
+			interrupt-parent = <&plic0>;
+			interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>,
+				     <14>, <15>, <16>, <17>, <18>, <19>, <20>,
+				     <21>, <22>;
+			reg = <0x0 0x10060000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
new file mode 100644
index 0000000000..5235fd1c9c
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "sifive,fu740-c000", "sifive,fu740";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			compatible = "sifive,bullet0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			next-level-cache = <&ccache>;
+			reg = <0x0>;
+			riscv,isa = "rv64imac";
+			status = "disabled";
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu1: cpu@1 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x1>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu2: cpu@2 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x2>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu3: cpu@3 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x3>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu4: cpu@4 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x4>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+			};
+		};
+	};
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			riscv,ndev = <69>;
+			interrupt-controller;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
+		};
+		prci: clock-controller@10000000 {
+			compatible = "sifive,fu740-c000-prci";
+			reg = <0x0 0x10000000 0x0 0x1000>;
+			clocks = <&hfclk>, <&rtcclk>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+		uart0: serial@10010000 {
+			compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10010000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <39>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		uart1: serial@10011000 {
+			compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10011000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <40>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		i2c0: i2c@10030000 {
+			compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10030000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <52>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		i2c1: i2c@10031000 {
+			compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10031000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <53>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi0: spi@10040000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10040000 0x0 0x1000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <41>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi1: spi@10041000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10041000 0x0 0x1000>,
+			      <0x0 0x30000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <42>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		spi0: spi@10050000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10050000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <43>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		eth0: ethernet@10090000 {
+			compatible = "sifive,fu540-c000-gem";
+			interrupt-parent = <&plic0>;
+			interrupts = <55>;
+			reg = <0x0 0x10090000 0x0 0x2000>,
+			      <0x0 0x100a0000 0x0 0x1000>;
+			local-mac-address = [00 00 00 00 00 00];
+			clock-names = "pclk", "hclk";
+			clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>,
+				 <&prci FU740_PRCI_CLK_GEMGXLPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		pwm0: pwm@10020000 {
+			compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10020000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <44>, <45>, <46>, <47>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		pwm1: pwm@10021000 {
+			compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10021000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <48>, <49>, <50>, <51>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		ccache: cache-controller@2010000 {
+			compatible = "sifive,fu740-c000-ccache", "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic0>;
+			interrupts = <19>, <21>, <22>, <20>;
+			reg = <0x0 0x2010000 0x0 0x1000>;
+		};
+		gpio: gpio@10060000 {
+			compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+			interrupt-parent = <&plic0>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>, <31>, <32>, <33>, <34>, <35>, <36>,
+				     <37>, <38>;
+			reg = <0x0 0x10060000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		pcie@e00000000 {
+			compatible = "sifive,fu740-pcie";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			reg = <0xe 0x00000000 0x0 0x80000000>,
+			      <0xd 0xf0000000 0x0 0x10000000>,
+			      <0x0 0x100d0000 0x0 0x1000>;
+			reg-names = "dbi", "config", "mgmt";
+			device_type = "pci";
+			dma-coherent;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000  0x0 0x60080000  0x0 0x60080000 0x0 0x10000>,      /* I/O */
+				 <0x82000000  0x0 0x60090000  0x0 0x60090000 0x0 0xff70000>,    /* mem */
+				 <0x82000000  0x0 0x70000000  0x0 0x70000000 0x0 0x10000000>,    /* mem */
+				 <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>;  /* mem prefetchable */
+			num-lanes = <0x8>;
+			interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>;
+			interrupt-names = "msi", "inta", "intb", "intc", "intd";
+			interrupt-parent = <&plic0>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+					<0x0 0x0 0x0 0x2 &plic0 58>,
+					<0x0 0x0 0x0 0x3 &plic0 59>,
+					<0x0 0x0 0x0 0x4 &plic0 60>;
+			clock-names = "pcie_aux";
+			clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
+			pwren-gpios = <&gpio 5 0>;
+			reset-gpios = <&gpio 8 0>;
+			resets = <&prci 4>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
new file mode 100644
index 0000000000..900a50526d
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2018-2019 SiFive, Inc */
+
+#include "fu540-c000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
+#define RTCCLK_FREQ		1000000
+
+/ {
+	model = "SiFive HiFive Unleashed A00";
+	compatible = "sifive,hifive-unleashed-a00", "sifive,fu540-c000",
+		     "sifive,fu540";
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	cpus {
+		timebase-frequency = <RTCCLK_FREQ>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	hfclk: hfclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <33333333>;
+		clock-output-names = "hfclk";
+	};
+
+	rtcclk: rtcclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <RTCCLK_FREQ>;
+		clock-output-names = "rtcclk";
+	};
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-d1 {
+			pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d1";
+		};
+
+		led-d2 {
+			pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d2";
+		};
+
+		led-d3 {
+			pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d3";
+		};
+
+		led-d4 {
+			pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d4";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&qspi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&qspi2 {
+	status = "okay";
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3300 3300>;
+		disable-wp;
+		gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.0771";
+		reg = <0>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
new file mode 100644
index 0000000000..07387f9c13
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+#include "fu740-c000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
+#define RTCCLK_FREQ		1000000
+
+/ {
+	model = "SiFive HiFive Unmatched A00";
+	compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000",
+		     "sifive,fu740";
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	cpus {
+		timebase-frequency = <RTCCLK_FREQ>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x4 0x00000000>;
+	};
+
+	hfclk: hfclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		clock-output-names = "hfclk";
+	};
+
+	rtcclk: rtcclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <RTCCLK_FREQ>;
+		clock-output-names = "rtcclk";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-d12 {
+			pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d12";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			max-brightness = <255>;
+			label = "d2";
+
+			led-red {
+				pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led-green {
+				pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led-blue {
+				pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp451";
+		reg = <0x4c>;
+		vcc-supply = <&vdd_bpro>;
+		interrupt-parent = <&gpio>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	eeprom@54 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x54>;
+		vcc-supply = <&vdd_bpro>;
+		label = "board-id";
+		pagesize = <16>;
+		read-only;
+		size = <256>;
+	};
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		regulators {
+			vdd_bcore: bcores-merged {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microamp = <4800000>;
+				regulator-max-microamp = <4800000>;
+				regulator-always-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <2400000>;
+				regulator-max-microamp = <2400000>;
+				regulator-always-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1060000>;
+				regulator-min-microamp = <1500000>;
+				regulator-max-microamp = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_bmem_bio: bmem-bio-merged {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microamp = <3000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_ld09: ldo9 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3300 3300>;
+		disable-wp;
+		gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "J29.1", "PMICNTB", "PMICSHDN", "J8.1", "J8.3",
+		"PCIe_PWREN", "THERM", "UBRDG_RSTN", "PCIe_PERSTN",
+		"ULPI_RSTN", "J8.2", "UHUB_RSTN", "GEMGXL_RST", "J8.4",
+		"EN_VDD_SD", "SD_CD";
+};
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
new file mode 100644
index 0000000000..0141504c0f
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_jh7100-beaglev-starlight := -@
+DTC_FLAGS_jh7100-starfive-visionfive-v1 := -@
+DTC_FLAGS_jh7110-starfive-visionfive-2-v1.2a := -@
+DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
new file mode 100644
index 0000000000..7cda3a8902
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100-common.dtsi"
+
+/ {
+	model = "BeagleV Starlight Beta";
+	compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
new file mode 100644
index 0000000000..b93ce351a9
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+
+/ {
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <6250000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ack {
+			gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			label = "ack";
+		};
+	};
+};
+
+&gpio {
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(62, GPO_LOW,
+				  GPO_I2C0_PAD_SCK_OEN,
+				  GPI_I2C0_PAD_SCK_IN)>,
+				 <GPIOMUX(61, GPO_LOW,
+				  GPO_I2C0_PAD_SDA_OEN,
+				  GPI_I2C0_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(47, GPO_LOW,
+				  GPO_I2C1_PAD_SCK_OEN,
+				  GPI_I2C1_PAD_SCK_IN)>,
+				 <GPIOMUX(48, GPO_LOW,
+				  GPO_I2C1_PAD_SDA_OEN,
+				  GPI_I2C1_PAD_SDA_IN)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(60, GPO_LOW,
+				  GPO_I2C2_PAD_SCK_OEN,
+				  GPI_I2C2_PAD_SCK_IN)>,
+				 <GPIOMUX(59, GPO_LOW,
+				  GPO_I2C2_PAD_SDA_OEN,
+				  GPI_I2C2_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	uart3_pins: uart3-0 {
+		rx-pins {
+			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+				  GPI_UART3_PAD_SIN)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+		tx-pins {
+			pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <500>;
+	i2c-scl-falling-time-ns = <500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	pmic@5e {
+		compatible = "ti,tps65086";
+		reg = <0x5e>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <100>;
+	i2c-scl-falling-time-ns = <100>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <500>;
+	i2c-scl-falling-time-ns = <500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&osc_sys {
+	clock-frequency = <25000000>;
+};
+
+&osc_aud {
+	clock-frequency = <27000000>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
new file mode 100644
index 0000000000..e82af72f1a
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "StarFive VisionFive V1";
+	compatible = "starfive,visionfive-v1", "starfive,jh7100";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
new file mode 100644
index 0000000000..35ab54fb23
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7100.h>
+#include <dt-bindings/reset/starfive-jh7100.h>
+
+/ {
+	compatible = "starfive,jh7100";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		U74_0: cpu@0 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_1: cpu@1 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <1>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&U74_0>;
+				};
+
+				core1 {
+					cpu = <&U74_1>;
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <15000>;
+
+			thermal-sensors = <&sfctemp>;
+
+			trips {
+				cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	osc_sys: osc_sys {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	osc_aud: osc_aud {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	gmac_rmii_ref: gmac_rmii_ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* Should be overridden by the board when needed */
+		clock-frequency = <0>;
+	};
+
+	gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* Should be overridden by the board when needed */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clint: clint@2000000 {
+			compatible = "starfive,jh7100-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+					       &cpu1_intc 3 &cpu1_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9
+					       &cpu1_intc 11 &cpu1_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			riscv,ndev = <133>;
+		};
+
+		clkgen: clock-controller@11800000 {
+			compatible = "starfive,jh7100-clkgen";
+			reg = <0x0 0x11800000 0x0 0x10000>;
+			clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+			clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+			#clock-cells = <1>;
+		};
+
+		rstgen: reset-controller@11840000 {
+			compatible = "starfive,jh7100-reset";
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@118b0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x118b0000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C0_CORE>,
+				 <&clkgen JH7100_CLK_I2C0_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C0_APB>;
+			interrupts = <96>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@118c0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x118c0000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C1_CORE>,
+				 <&clkgen JH7100_CLK_I2C1_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C1_APB>;
+			interrupts = <97>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gpio: pinctrl@11910000 {
+			compatible = "starfive,jh7100-pinctrl";
+			reg = <0x0 0x11910000 0x0 0x10000>,
+			      <0x0 0x11858000 0x0 0x1000>;
+			reg-names = "gpio", "padctl";
+			clocks = <&clkgen JH7100_CLK_GPIO_APB>;
+			resets = <&rstgen JH7100_RSTN_GPIO_APB>;
+			interrupts = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart2: serial@12430000 {
+			compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
+			reg = <0x0 0x12430000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_UART2_CORE>,
+				 <&clkgen JH7100_CLK_UART2_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&rstgen JH7100_RSTN_UART2_APB>;
+			interrupts = <72>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart3: serial@12440000 {
+			compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
+			reg = <0x0 0x12440000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_UART3_CORE>,
+				 <&clkgen JH7100_CLK_UART3_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&rstgen JH7100_RSTN_UART3_APB>;
+			interrupts = <73>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@12450000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12450000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C2_CORE>,
+				 <&clkgen JH7100_CLK_I2C2_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C2_APB>;
+			interrupts = <74>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@12460000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12460000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C3_CORE>,
+				 <&clkgen JH7100_CLK_I2C3_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C3_APB>;
+			interrupts = <75>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		watchdog@12480000 {
+			compatible = "starfive,jh7100-wdt";
+			reg = <0x0 0x12480000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_WDTIMER_APB>,
+				 <&clkgen JH7100_CLK_WDT_CORE>;
+			clock-names = "apb", "core";
+			resets = <&rstgen JH7100_RSTN_WDTIMER_APB>,
+				 <&rstgen JH7100_RSTN_WDT>;
+		};
+
+		sfctemp: temperature-sensor@124a0000 {
+			compatible = "starfive,jh7100-temp";
+			reg = <0x0 0x124a0000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_TEMP_SENSE>,
+				 <&clkgen JH7100_CLK_TEMP_APB>;
+			clock-names = "sense", "bus";
+			resets = <&rstgen JH7100_RSTN_TEMP_SENSE>,
+				 <&rstgen JH7100_RSTN_TEMP_APB>;
+			reset-names = "sense", "bus";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
new file mode 100644
index 0000000000..fb0139b567
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#ifndef __JH7110_PINFUNC_H__
+#define __JH7110_PINFUNC_H__
+
+/*
+ * mux bits:
+ *  | 31 - 24 | 23 - 16 | 15 - 10 |  9 - 8   |  7 - 0  |
+ *  |  din    |  dout   |  doen   | function | gpio nr |
+ *
+ * dout:     output signal
+ * doen:     output enable signal
+ * din:      optional input signal, 0xff = none
+ * function: function selector
+ * gpio nr:  gpio number, 0 - 63
+ */
+#define GPIOMUX(n, dout, doen, din) ( \
+		(((din)  & 0xff) << 24) | \
+		(((dout) & 0xff) << 16) | \
+		(((doen) & 0x3f) << 10) | \
+		((n) & 0x3f))
+
+#define PINMUX(n, func) ((1 << 10) | (((func) & 0x3) << 8) | ((n) & 0xff))
+
+/* sys_iomux dout */
+#define GPOUT_LOW				0
+#define GPOUT_HIGH				1
+#define GPOUT_SYS_WAVE511_UART_TX		2
+#define GPOUT_SYS_CAN0_STBY			3
+#define GPOUT_SYS_CAN0_TST_NEXT_BIT		4
+#define GPOUT_SYS_CAN0_TST_SAMPLE_POINT		5
+#define GPOUT_SYS_CAN0_TXD			6
+#define GPOUT_SYS_USB_DRIVE_VBUS		7
+#define GPOUT_SYS_QSPI_CS1			8
+#define GPOUT_SYS_SPDIF				9
+#define GPOUT_SYS_HDMI_CEC_SDA			10
+#define GPOUT_SYS_HDMI_DDC_SCL			11
+#define GPOUT_SYS_HDMI_DDC_SDA			12
+#define GPOUT_SYS_WATCHDOG			13
+#define GPOUT_SYS_I2C0_CLK			14
+#define GPOUT_SYS_I2C0_DATA			15
+#define GPOUT_SYS_SDIO0_BACK_END_POWER		16
+#define GPOUT_SYS_SDIO0_CARD_POWER_EN		17
+#define GPOUT_SYS_SDIO0_CCMD_OD_PULLUP_EN	18
+#define GPOUT_SYS_SDIO0_RST			19
+#define GPOUT_SYS_UART0_TX			20
+#define GPOUT_SYS_HIFI4_JTAG_TDO		21
+#define GPOUT_SYS_JTAG_TDO			22
+#define GPOUT_SYS_PDM_MCLK			23
+#define GPOUT_SYS_PWM_CHANNEL0			24
+#define GPOUT_SYS_PWM_CHANNEL1			25
+#define GPOUT_SYS_PWM_CHANNEL2			26
+#define GPOUT_SYS_PWM_CHANNEL3			27
+#define GPOUT_SYS_PWMDAC_LEFT			28
+#define GPOUT_SYS_PWMDAC_RIGHT			29
+#define GPOUT_SYS_SPI0_CLK			30
+#define GPOUT_SYS_SPI0_FSS			31
+#define GPOUT_SYS_SPI0_TXD			32
+#define GPOUT_SYS_GMAC_PHYCLK			33
+#define GPOUT_SYS_I2SRX_BCLK			34
+#define GPOUT_SYS_I2SRX_LRCK			35
+#define GPOUT_SYS_I2STX0_BCLK			36
+#define GPOUT_SYS_I2STX0_LRCK			37
+#define GPOUT_SYS_MCLK				38
+#define GPOUT_SYS_TDM_CLK			39
+#define GPOUT_SYS_TDM_SYNC			40
+#define GPOUT_SYS_TDM_TXD			41
+#define GPOUT_SYS_TRACE_DATA0			42
+#define GPOUT_SYS_TRACE_DATA1			43
+#define GPOUT_SYS_TRACE_DATA2			44
+#define GPOUT_SYS_TRACE_DATA3			45
+#define GPOUT_SYS_TRACE_REF			46
+#define GPOUT_SYS_CAN1_STBY			47
+#define GPOUT_SYS_CAN1_TST_NEXT_BIT		48
+#define GPOUT_SYS_CAN1_TST_SAMPLE_POINT		49
+#define GPOUT_SYS_CAN1_TXD			50
+#define GPOUT_SYS_I2C1_CLK			51
+#define GPOUT_SYS_I2C1_DATA			52
+#define GPOUT_SYS_SDIO1_BACK_END_POWER		53
+#define GPOUT_SYS_SDIO1_CARD_POWER_EN		54
+#define GPOUT_SYS_SDIO1_CLK			55
+#define GPOUT_SYS_SDIO1_CMD_OD_PULLUP_EN	56
+#define GPOUT_SYS_SDIO1_CMD			57
+#define GPOUT_SYS_SDIO1_DATA0			58
+#define GPOUT_SYS_SDIO1_DATA1			59
+#define GPOUT_SYS_SDIO1_DATA2			60
+#define GPOUT_SYS_SDIO1_DATA3			61
+#define GPOUT_SYS_SDIO1_DATA4			63
+#define GPOUT_SYS_SDIO1_DATA5			63
+#define GPOUT_SYS_SDIO1_DATA6			64
+#define GPOUT_SYS_SDIO1_DATA7			65
+#define GPOUT_SYS_SDIO1_RST			66
+#define GPOUT_SYS_UART1_RTS			67
+#define GPOUT_SYS_UART1_TX			68
+#define GPOUT_SYS_I2STX1_SDO0			69
+#define GPOUT_SYS_I2STX1_SDO1			70
+#define GPOUT_SYS_I2STX1_SDO2			71
+#define GPOUT_SYS_I2STX1_SDO3			72
+#define GPOUT_SYS_SPI1_CLK			73
+#define GPOUT_SYS_SPI1_FSS			74
+#define GPOUT_SYS_SPI1_TXD			75
+#define GPOUT_SYS_I2C2_CLK			76
+#define GPOUT_SYS_I2C2_DATA			77
+#define GPOUT_SYS_UART2_RTS			78
+#define GPOUT_SYS_UART2_TX			79
+#define GPOUT_SYS_SPI2_CLK			80
+#define GPOUT_SYS_SPI2_FSS			81
+#define GPOUT_SYS_SPI2_TXD			82
+#define GPOUT_SYS_I2C3_CLK			83
+#define GPOUT_SYS_I2C3_DATA			84
+#define GPOUT_SYS_UART3_TX			85
+#define GPOUT_SYS_SPI3_CLK			86
+#define GPOUT_SYS_SPI3_FSS			87
+#define GPOUT_SYS_SPI3_TXD			88
+#define GPOUT_SYS_I2C4_CLK			89
+#define GPOUT_SYS_I2C4_DATA			90
+#define GPOUT_SYS_UART4_RTS			91
+#define GPOUT_SYS_UART4_TX			92
+#define GPOUT_SYS_SPI4_CLK			93
+#define GPOUT_SYS_SPI4_FSS			94
+#define GPOUT_SYS_SPI4_TXD			95
+#define GPOUT_SYS_I2C5_CLK			96
+#define GPOUT_SYS_I2C5_DATA			97
+#define GPOUT_SYS_UART5_RTS			98
+#define GPOUT_SYS_UART5_TX			99
+#define GPOUT_SYS_SPI5_CLK			100
+#define GPOUT_SYS_SPI5_FSS			101
+#define GPOUT_SYS_SPI5_TXD			102
+#define GPOUT_SYS_I2C6_CLK			103
+#define GPOUT_SYS_I2C6_DATA			104
+#define GPOUT_SYS_SPI6_CLK			105
+#define GPOUT_SYS_SPI6_FSS			106
+#define GPOUT_SYS_SPI6_TXD			107
+
+/* aon_iomux dout */
+#define GPOUT_AON_CLK_32K_OUT			2
+#define GPOUT_AON_PTC0_PWM4			3
+#define GPOUT_AON_PTC0_PWM5			4
+#define GPOUT_AON_PTC0_PWM6			5
+#define GPOUT_AON_PTC0_PWM7			6
+#define GPOUT_AON_CLK_GCLK0			7
+#define GPOUT_AON_CLK_GCLK1			8
+#define GPOUT_AON_CLK_GCLK2			9
+
+/* sys_iomux doen */
+#define GPOEN_ENABLE				0
+#define GPOEN_DISABLE				1
+#define GPOEN_SYS_HDMI_CEC_SDA			2
+#define GPOEN_SYS_HDMI_DDC_SCL			3
+#define GPOEN_SYS_HDMI_DDC_SDA			4
+#define GPOEN_SYS_I2C0_CLK			5
+#define GPOEN_SYS_I2C0_DATA			6
+#define GPOEN_SYS_HIFI4_JTAG_TDO		7
+#define GPOEN_SYS_JTAG_TDO			8
+#define GPOEN_SYS_PWM0_CHANNEL0			9
+#define GPOEN_SYS_PWM0_CHANNEL1			10
+#define GPOEN_SYS_PWM0_CHANNEL2			11
+#define GPOEN_SYS_PWM0_CHANNEL3			12
+#define GPOEN_SYS_SPI0_NSSPCTL			13
+#define GPOEN_SYS_SPI0_NSSP			14
+#define GPOEN_SYS_TDM_SYNC			15
+#define GPOEN_SYS_TDM_TXD			16
+#define GPOEN_SYS_I2C1_CLK			17
+#define GPOEN_SYS_I2C1_DATA			18
+#define GPOEN_SYS_SDIO1_CMD			19
+#define GPOEN_SYS_SDIO1_DATA0			20
+#define GPOEN_SYS_SDIO1_DATA1			21
+#define GPOEN_SYS_SDIO1_DATA2			22
+#define GPOEN_SYS_SDIO1_DATA3			23
+#define GPOEN_SYS_SDIO1_DATA4			24
+#define GPOEN_SYS_SDIO1_DATA5			25
+#define GPOEN_SYS_SDIO1_DATA6			26
+#define GPOEN_SYS_SDIO1_DATA7			27
+#define GPOEN_SYS_SPI1_NSSPCTL			28
+#define GPOEN_SYS_SPI1_NSSP			29
+#define GPOEN_SYS_I2C2_CLK			30
+#define GPOEN_SYS_I2C2_DATA			31
+#define GPOEN_SYS_SPI2_NSSPCTL			32
+#define GPOEN_SYS_SPI2_NSSP			33
+#define GPOEN_SYS_I2C3_CLK			34
+#define GPOEN_SYS_I2C3_DATA			35
+#define GPOEN_SYS_SPI3_NSSPCTL			36
+#define GPOEN_SYS_SPI3_NSSP			37
+#define GPOEN_SYS_I2C4_CLK			38
+#define GPOEN_SYS_I2C4_DATA			39
+#define GPOEN_SYS_SPI4_NSSPCTL			40
+#define GPOEN_SYS_SPI4_NSSP			41
+#define GPOEN_SYS_I2C5_CLK			42
+#define GPOEN_SYS_I2C5_DATA			43
+#define GPOEN_SYS_SPI5_NSSPCTL			44
+#define GPOEN_SYS_SPI5_NSSP			45
+#define GPOEN_SYS_I2C6_CLK			46
+#define GPOEN_SYS_I2C6_DATA			47
+#define GPOEN_SYS_SPI6_NSSPCTL			48
+#define GPOEN_SYS_SPI6_NSSP			49
+
+/* aon_iomux doen */
+#define GPOEN_AON_PTC0_OE_N_4			2
+#define GPOEN_AON_PTC0_OE_N_5			3
+#define GPOEN_AON_PTC0_OE_N_6			4
+#define GPOEN_AON_PTC0_OE_N_7			5
+
+/* sys_iomux gin */
+#define GPI_NONE				255
+
+#define GPI_SYS_WAVE511_UART_RX			0
+#define GPI_SYS_CAN0_RXD			1
+#define GPI_SYS_USB_OVERCURRENT			2
+#define GPI_SYS_SPDIF				3
+#define GPI_SYS_JTAG_RST			4
+#define GPI_SYS_HDMI_CEC_SDA			5
+#define GPI_SYS_HDMI_DDC_SCL			6
+#define GPI_SYS_HDMI_DDC_SDA			7
+#define GPI_SYS_HDMI_HPD			8
+#define GPI_SYS_I2C0_CLK			9
+#define GPI_SYS_I2C0_DATA			10
+#define GPI_SYS_SDIO0_CD			11
+#define GPI_SYS_SDIO0_INT			12
+#define GPI_SYS_SDIO0_WP			13
+#define GPI_SYS_UART0_RX			14
+#define GPI_SYS_HIFI4_JTAG_TCK			15
+#define GPI_SYS_HIFI4_JTAG_TDI			16
+#define GPI_SYS_HIFI4_JTAG_TMS			17
+#define GPI_SYS_HIFI4_JTAG_RST			18
+#define GPI_SYS_JTAG_TDI			19
+#define GPI_SYS_JTAG_TMS			20
+#define GPI_SYS_PDM_DMIC0			21
+#define GPI_SYS_PDM_DMIC1			22
+#define GPI_SYS_I2SRX_SDIN0			23
+#define GPI_SYS_I2SRX_SDIN1			24
+#define GPI_SYS_I2SRX_SDIN2			25
+#define GPI_SYS_SPI0_CLK			26
+#define GPI_SYS_SPI0_FSS			27
+#define GPI_SYS_SPI0_RXD			28
+#define GPI_SYS_JTAG_TCK			29
+#define GPI_SYS_MCLK_EXT			30
+#define GPI_SYS_I2SRX_BCLK			31
+#define GPI_SYS_I2SRX_LRCK			32
+#define GPI_SYS_I2STX0_BCLK			33
+#define GPI_SYS_I2STX0_LRCK			34
+#define GPI_SYS_TDM_CLK				35
+#define GPI_SYS_TDM_RXD				36
+#define GPI_SYS_TDM_SYNC			37
+#define GPI_SYS_CAN1_RXD			38
+#define GPI_SYS_I2C1_CLK			39
+#define GPI_SYS_I2C1_DATA			40
+#define GPI_SYS_SDIO1_CD			41
+#define GPI_SYS_SDIO1_INT			42
+#define GPI_SYS_SDIO1_WP			43
+#define GPI_SYS_SDIO1_CMD			44
+#define GPI_SYS_SDIO1_DATA0			45
+#define GPI_SYS_SDIO1_DATA1			46
+#define GPI_SYS_SDIO1_DATA2			47
+#define GPI_SYS_SDIO1_DATA3			48
+#define GPI_SYS_SDIO1_DATA4			49
+#define GPI_SYS_SDIO1_DATA5			50
+#define GPI_SYS_SDIO1_DATA6			51
+#define GPI_SYS_SDIO1_DATA7			52
+#define GPI_SYS_SDIO1_STRB			53
+#define GPI_SYS_UART1_CTS			54
+#define GPI_SYS_UART1_RX			55
+#define GPI_SYS_SPI1_CLK			56
+#define GPI_SYS_SPI1_FSS			57
+#define GPI_SYS_SPI1_RXD			58
+#define GPI_SYS_I2C2_CLK			59
+#define GPI_SYS_I2C2_DATA			60
+#define GPI_SYS_UART2_CTS			61
+#define GPI_SYS_UART2_RX			62
+#define GPI_SYS_SPI2_CLK			63
+#define GPI_SYS_SPI2_FSS			64
+#define GPI_SYS_SPI2_RXD			65
+#define GPI_SYS_I2C3_CLK			66
+#define GPI_SYS_I2C3_DATA			67
+#define GPI_SYS_UART3_RX			68
+#define GPI_SYS_SPI3_CLK			69
+#define GPI_SYS_SPI3_FSS			70
+#define GPI_SYS_SPI3_RXD			71
+#define GPI_SYS_I2C4_CLK			72
+#define GPI_SYS_I2C4_DATA			73
+#define GPI_SYS_UART4_CTS			74
+#define GPI_SYS_UART4_RX			75
+#define GPI_SYS_SPI4_CLK			76
+#define GPI_SYS_SPI4_FSS			77
+#define GPI_SYS_SPI4_RXD			78
+#define GPI_SYS_I2C5_CLK			79
+#define GPI_SYS_I2C5_DATA			80
+#define GPI_SYS_UART5_CTS			81
+#define GPI_SYS_UART5_RX			82
+#define GPI_SYS_SPI5_CLK			83
+#define GPI_SYS_SPI5_FSS			84
+#define GPI_SYS_SPI5_RXD			85
+#define GPI_SYS_I2C6_CLK			86
+#define GPI_SYS_I2C6_DATA			87
+#define GPI_SYS_SPI6_CLK			88
+#define GPI_SYS_SPI6_FSS			89
+#define GPI_SYS_SPI6_RXD			90
+
+/* aon_iomux gin */
+#define GPI_AON_PMU_GPIO_WAKEUP_0		0
+#define GPI_AON_PMU_GPIO_WAKEUP_1		1
+#define GPI_AON_PMU_GPIO_WAKEUP_2		2
+#define GPI_AON_PMU_GPIO_WAKEUP_3		3
+
+#endif
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
new file mode 100644
index 0000000000..205a13d8c8
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110-starfive-visionfive-2.dtsi"
+
+/ {
+	model = "StarFive VisionFive 2 v1.2A";
+	compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110";
+};
+
+&gmac1 {
+	phy-mode = "rmii";
+	assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>,
+			  <&syscrg JH7110_SYSCLK_GMAC1_RX>;
+	assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+	rx-internal-delay-ps = <1900>;
+	tx-internal-delay-ps = <1350>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
new file mode 100644
index 0000000000..d4ea4a2c0b
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110-starfive-visionfive-2.dtsi"
+
+/ {
+	model = "StarFive VisionFive 2 v1.3B";
+	compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
+};
+
+&gmac0 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+&gmac1 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>;
+	assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+	motorcomm,rx-clk-drv-microamp = <3970>;
+	motorcomm,rx-data-drv-microamp = <2910>;
+	rx-internal-delay-ps = <1500>;
+	tx-internal-delay-ps = <1500>;
+};
+
+&phy1 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,rx-clk-drv-microamp = <3970>;
+	motorcomm,rx-data-drv-microamp = <2910>;
+	rx-internal-delay-ps = <300>;
+	tx-internal-delay-ps = <0>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
new file mode 100644
index 0000000000..2c02358abd
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7110.dtsi"
+#include "jh7110-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <4000000>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x1 0x0>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+};
+
+&dvp_clk {
+	clock-frequency = <74250000>;
+};
+
+&gmac0_rgmii_rxin {
+	clock-frequency = <125000000>;
+};
+
+&gmac0_rmii_refin {
+	clock-frequency = <50000000>;
+};
+
+&gmac1_rgmii_rxin {
+	clock-frequency = <125000000>;
+};
+
+&gmac1_rmii_refin {
+	clock-frequency = <50000000>;
+};
+
+&hdmitx0_pixelclk {
+	clock-frequency = <297000000>;
+};
+
+&i2srx_bclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&i2srx_lrck_ext {
+	clock-frequency = <192000>;
+};
+
+&i2stx_bclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&i2stx_lrck_ext {
+	clock-frequency = <192000>;
+};
+
+&mclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&osc {
+	clock-frequency = <24000000>;
+};
+
+&rtc_osc {
+	clock-frequency = <32768>;
+};
+
+&tdm_ext {
+	clock-frequency = <49152000>;
+};
+
+&gmac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy1: ethernet-phy@1 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+
+	axp15060: pmic@36 {
+		compatible = "x-powers,axp15060";
+		reg = <0x36>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators {
+			vcc_3v3: dcdc1 {
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+			};
+
+			vdd_cpu: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1540000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			emmc_vdd: aldo4 {
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "emmc_vdd";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <100000000>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	cap-mmc-hw-reset;
+	post-power-on-delay-ms = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_vdd>;
+	status = "okay";
+};
+
+&mmc1 {
+	max-frequency = <100000000>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	broken-cd;
+	cap-sd-highspeed;
+	post-power-on-delay-ms = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	status = "okay";
+};
+
+&qspi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nor_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		cdns,read-delay = <5>;
+		spi-max-frequency = <12000000>;
+		cdns,tshsl-ns = <1>;
+		cdns,tsd2d-ns = <1>;
+		cdns,tchsh-ns = <1>;
+		cdns,tslch-ns = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			spl@0 {
+				reg = <0x0 0x80000>;
+			};
+			uboot-env@f0000 {
+				reg = <0xf0000 0x10000>;
+			};
+			uboot@100000 {
+				reg = <0x100000 0x400000>;
+			};
+			reserved-data@600000 {
+				reg = <0x600000 0xa00000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi_dev0: spi@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&sysgpio {
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(57, GPOUT_LOW,
+					      GPOEN_SYS_I2C0_CLK,
+					      GPI_SYS_I2C0_CLK)>,
+				 <GPIOMUX(58, GPOUT_LOW,
+					      GPOEN_SYS_I2C0_DATA,
+					      GPI_SYS_I2C0_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(3, GPOUT_LOW,
+					     GPOEN_SYS_I2C2_CLK,
+					     GPI_SYS_I2C2_CLK)>,
+				 <GPIOMUX(2, GPOUT_LOW,
+					     GPOEN_SYS_I2C2_DATA,
+					     GPI_SYS_I2C2_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(19, GPOUT_LOW,
+					      GPOEN_SYS_I2C5_CLK,
+					      GPI_SYS_I2C5_CLK)>,
+				 <GPIOMUX(20, GPOUT_LOW,
+					      GPOEN_SYS_I2C5_DATA,
+					      GPI_SYS_I2C5_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(16, GPOUT_LOW,
+					      GPOEN_SYS_I2C6_CLK,
+					      GPI_SYS_I2C6_CLK)>,
+				 <GPIOMUX(17, GPOUT_LOW,
+					      GPOEN_SYS_I2C6_DATA,
+					      GPI_SYS_I2C6_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	mmc0_pins: mmc0-0 {
+		 rst-pins {
+			pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		mmc-pins {
+			pinmux = <PINMUX(64, 0)>,
+				 <PINMUX(65, 0)>,
+				 <PINMUX(66, 0)>,
+				 <PINMUX(67, 0)>,
+				 <PINMUX(68, 0)>,
+				 <PINMUX(69, 0)>,
+				 <PINMUX(70, 0)>,
+				 <PINMUX(71, 0)>,
+				 <PINMUX(72, 0)>,
+				 <PINMUX(73, 0)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-enable;
+		};
+	};
+
+	mmc1_pins: mmc1-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		mmc-pins {
+			pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
+					     GPOEN_SYS_SDIO1_CMD,
+					     GPI_SYS_SDIO1_CMD)>,
+				 <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
+					      GPOEN_SYS_SDIO1_DATA0,
+					      GPI_SYS_SDIO1_DATA0)>,
+				 <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
+					      GPOEN_SYS_SDIO1_DATA1,
+					      GPI_SYS_SDIO1_DATA1)>,
+				 <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
+					     GPOEN_SYS_SDIO1_DATA2,
+					     GPI_SYS_SDIO1_DATA2)>,
+				 <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
+					     GPOEN_SYS_SDIO1_DATA3,
+					     GPI_SYS_SDIO1_DATA3)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+
+	spi0_pins: spi0-0 {
+		mosi-pins {
+			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		miso-pins {
+			pinmux = <GPIOMUX(53, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_SYS_SPI0_RXD)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+
+		sck-pins {
+			pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
+					      GPOEN_ENABLE,
+					      GPI_SYS_SPI0_CLK)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		ss-pins {
+			pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
+					      GPOEN_ENABLE,
+					      GPI_SYS_SPI0_FSS)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+	};
+
+	tdm_pins: tdm-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(61, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_RXD)>;
+			input-enable;
+		};
+
+		sync-pins {
+			pinmux = <GPIOMUX(63, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_SYNC)>;
+			input-enable;
+		};
+
+		pcmclk-pins {
+			pinmux = <GPIOMUX(38, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_CLK)>;
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+					     GPOEN_ENABLE,
+					     GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(6, GPOUT_LOW,
+					     GPOEN_DISABLE,
+					     GPI_SYS_UART0_RX)>;
+			bias-disable; /* external pull-up */
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&tdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tdm_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&U74_1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+	cpu-supply = <&vdd_cpu>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
new file mode 100644
index 0000000000..e85464c328
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -0,0 +1,1049 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive,jh7110-crg.h>
+#include <dt-bindings/power/starfive,jh7110-pmu.h>
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "starfive,jh7110";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		S7_0: cpu@0 {
+			compatible = "sifive,s7", "riscv";
+			reg = <0>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <16384>;
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imac_zba_zbb";
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_1: cpu@1 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <1>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zba_zbb";
+			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_2: cpu@2 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <2>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zba_zbb";
+			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_3: cpu@3 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <3>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zba_zbb";
+			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		U74_4: cpu@4 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <4>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			riscv,isa = "rv64imafdc_zba_zbb";
+			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			cpu4_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&S7_0>;
+				};
+
+				core1 {
+					cpu = <&U74_1>;
+				};
+
+				core2 {
+					cpu = <&U74_2>;
+				};
+
+				core3 {
+					cpu = <&U74_3>;
+				};
+
+				core4 {
+					cpu = <&U74_4>;
+				};
+			};
+		};
+	};
+
+	cpu_opp: opp-table-0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp-375000000 {
+					opp-hz = /bits/ 64 <375000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-750000000 {
+					opp-hz = /bits/ 64 <750000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-1500000000 {
+					opp-hz = /bits/ 64 <1500000000>;
+					opp-microvolt = <1040000>;
+			};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <15000>;
+
+			thermal-sensors = <&sfctemp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&U74_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&U74_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&U74_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&U74_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	dvp_clk: dvp-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "dvp_clk";
+		#clock-cells = <0>;
+	};
+	gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac0_rgmii_rxin";
+		#clock-cells = <0>;
+	};
+
+	gmac0_rmii_refin: gmac0-rmii-refin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac0_rmii_refin";
+		#clock-cells = <0>;
+	};
+
+	gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac1_rgmii_rxin";
+		#clock-cells = <0>;
+	};
+
+	gmac1_rmii_refin: gmac1-rmii-refin-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "gmac1_rmii_refin";
+		#clock-cells = <0>;
+	};
+
+	hdmitx0_pixelclk: hdmitx0-pixel-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "hdmitx0_pixelclk";
+		#clock-cells = <0>;
+	};
+
+	i2srx_bclk_ext: i2srx-bclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2srx_bclk_ext";
+		#clock-cells = <0>;
+	};
+
+	i2srx_lrck_ext: i2srx-lrck-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2srx_lrck_ext";
+		#clock-cells = <0>;
+	};
+
+	i2stx_bclk_ext: i2stx-bclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2stx_bclk_ext";
+		#clock-cells = <0>;
+	};
+
+	i2stx_lrck_ext: i2stx-lrck-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "i2stx_lrck_ext";
+		#clock-cells = <0>;
+	};
+
+	mclk_ext: mclk-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "mclk_ext";
+		#clock-cells = <0>;
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc";
+		#clock-cells = <0>;
+	};
+
+	rtc_osc: rtc-oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "rtc_osc";
+		#clock-cells = <0>;
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,lpi_en;
+		snps,wr_osr_lmt = <15>;
+		snps,rd_osr_lmt = <15>;
+		snps,blen = <256 128 64 32 0 0 0>;
+	};
+
+	tdm_ext: tdm-ext-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "tdm_ext";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clint: timer@2000000 {
+			compatible = "starfive,jh7110-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
+		};
+
+		ccache: cache-controller@2010000 {
+			compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
+			reg = <0x0 0x2010000 0x0 0x4000>;
+			interrupts = <1>, <3>, <4>, <2>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			riscv,ndev = <136>;
+		};
+
+		uart0: serial@10000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART0_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+			interrupts = <32>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart1: serial@10010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART1_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+			interrupts = <33>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart2: serial@10020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x10020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART2_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+			interrupts = <34>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@10030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10030000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C0_APB>;
+			interrupts = <35>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10040000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C1_APB>;
+			interrupts = <36>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10050000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10050000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C2_APB>;
+			interrupts = <37>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@10060000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x10060000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI0_APB>,
+				 <&syscrg JH7110_SYSCLK_SPI0_APB>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI0_APB>;
+			interrupts = <38>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10070000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x10070000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI1_APB>,
+				 <&syscrg JH7110_SYSCLK_SPI1_APB>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI1_APB>;
+			interrupts = <39>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@10080000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x10080000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI2_APB>,
+				 <&syscrg JH7110_SYSCLK_SPI2_APB>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI2_APB>;
+			interrupts = <40>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		tdm: tdm@10090000 {
+			compatible = "starfive,jh7110-tdm";
+			reg = <0x0 0x10090000 0x0 0x1000>;
+			clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+				 <&syscrg JH7110_SYSCLK_TDM_APB>,
+				 <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+				 <&syscrg JH7110_SYSCLK_TDM_TDM>,
+				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+				 <&tdm_ext>;
+			clock-names = "tdm_ahb", "tdm_apb",
+				      "tdm_internal", "tdm",
+				      "mclk_inner", "tdm_ext";
+			resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+				 <&syscrg JH7110_SYSRST_TDM_APB>,
+				 <&syscrg JH7110_SYSRST_TDM_CORE>;
+			dmas = <&dma 20>, <&dma 21>;
+			dma-names = "rx","tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		usb0: usb@10100000 {
+			compatible = "starfive,jh7110-usb";
+			ranges = <0x0 0x0 0x10100000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			starfive,stg-syscon = <&stg_syscon 0x4>;
+			clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>,
+				 <&stgcrg JH7110_STGCLK_USB0_STB>,
+				 <&stgcrg JH7110_STGCLK_USB0_APB>,
+				 <&stgcrg JH7110_STGCLK_USB0_AXI>,
+				 <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>;
+			clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+			resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>,
+				 <&stgcrg JH7110_STGRST_USB0_APB>,
+				 <&stgcrg JH7110_STGRST_USB0_AXI>,
+				 <&stgcrg JH7110_STGRST_USB0_UTMI_APB>;
+			reset-names = "pwrup", "apb", "axi", "utmi_apb";
+			status = "disabled";
+
+			usb_cdns3: usb@0 {
+				compatible = "cdns,usb3";
+				reg = <0x0 0x10000>,
+				      <0x10000 0x10000>,
+				      <0x20000 0x10000>;
+				reg-names = "otg", "xhci", "dev";
+				interrupts = <100>, <108>, <110>;
+				interrupt-names = "host", "peripheral", "otg";
+				phys = <&usbphy0>;
+				phy-names = "cdns3,usb2-phy";
+			};
+		};
+
+		usbphy0: phy@10200000 {
+			compatible = "starfive,jh7110-usb-phy";
+			reg = <0x0 0x10200000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
+				 <&stgcrg JH7110_STGCLK_USB0_APP_125>;
+			clock-names = "125m", "app_125m";
+			#phy-cells = <0>;
+		};
+
+		pciephy0: phy@10210000 {
+			compatible = "starfive,jh7110-pcie-phy";
+			reg = <0x0 0x10210000 0x0 0x10000>;
+			#phy-cells = <0>;
+		};
+
+		pciephy1: phy@10220000 {
+			compatible = "starfive,jh7110-pcie-phy";
+			reg = <0x0 0x10220000 0x0 0x10000>;
+			#phy-cells = <0>;
+		};
+
+		stgcrg: clock-controller@10230000 {
+			compatible = "starfive,jh7110-stgcrg";
+			reg = <0x0 0x10230000 0x0 0x10000>;
+			clocks = <&osc>,
+				 <&syscrg JH7110_SYSCLK_HIFI4_CORE>,
+				 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+				 <&syscrg JH7110_SYSCLK_USB_125M>,
+				 <&syscrg JH7110_SYSCLK_CPU_BUS>,
+				 <&syscrg JH7110_SYSCLK_HIFI4_AXI>,
+				 <&syscrg JH7110_SYSCLK_NOCSTG_BUS>,
+				 <&syscrg JH7110_SYSCLK_APB_BUS>;
+			clock-names = "osc", "hifi4_core",
+				      "stg_axiahb", "usb_125m",
+				      "cpu_bus", "hifi4_axi",
+				      "nocstg_bus", "apb_bus";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		stg_syscon: syscon@10240000 {
+			compatible = "starfive,jh7110-stg-syscon", "syscon";
+			reg = <0x0 0x10240000 0x0 0x1000>;
+		};
+
+		uart3: serial@12000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12000000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART3_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+			interrupts = <45>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart4: serial@12010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART4_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+			interrupts = <46>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart5: serial@12020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x12020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
+				 <&syscrg JH7110_SYSCLK_UART5_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+			interrupts = <47>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@12030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12030000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C3_APB>;
+			interrupts = <48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@12040000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C4_APB>;
+			interrupts = <49>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@12050000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12050000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C5_APB>;
+			interrupts = <50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@12060000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12060000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>;
+			clock-names = "ref";
+			resets = <&syscrg JH7110_SYSRST_I2C6_APB>;
+			interrupts = <51>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@12070000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x12070000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI3_APB>,
+				 <&syscrg JH7110_SYSCLK_SPI3_APB>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI3_APB>;
+			interrupts = <52>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@12080000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x12080000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI4_APB>,
+				 <&syscrg JH7110_SYSCLK_SPI4_APB>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI4_APB>;
+			interrupts = <53>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi5: spi@12090000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x12090000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI5_APB>,
+				 <&syscrg JH7110_SYSCLK_SPI5_APB>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI5_APB>;
+			interrupts = <54>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi6: spi@120a0000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0x120A0000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SPI6_APB>,
+				 <&syscrg JH7110_SYSCLK_SPI6_APB>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&syscrg JH7110_SYSRST_SPI6_APB>;
+			interrupts = <55>;
+			arm,primecell-periphid = <0x00041022>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sfctemp: temperature-sensor@120e0000 {
+			compatible = "starfive,jh7110-temp";
+			reg = <0x0 0x120e0000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_TEMP_CORE>,
+				 <&syscrg JH7110_SYSCLK_TEMP_APB>;
+			clock-names = "sense", "bus";
+			resets = <&syscrg JH7110_SYSRST_TEMP_CORE>,
+				 <&syscrg JH7110_SYSRST_TEMP_APB>;
+			reset-names = "sense", "bus";
+			#thermal-sensor-cells = <0>;
+		};
+
+		qspi: spi@13010000 {
+			compatible = "starfive,jh7110-qspi", "cdns,qspi-nor";
+			reg = <0x0 0x13010000 0x0 0x10000>,
+			      <0x0 0x21000000 0x0 0x400000>;
+			interrupts = <25>;
+			clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>,
+				 <&syscrg JH7110_SYSCLK_QSPI_AHB>,
+				 <&syscrg JH7110_SYSCLK_QSPI_APB>;
+			clock-names = "ref", "ahb", "apb";
+			resets = <&syscrg JH7110_SYSRST_QSPI_APB>,
+				 <&syscrg JH7110_SYSRST_QSPI_AHB>,
+				 <&syscrg JH7110_SYSRST_QSPI_REF>;
+			reset-names = "qspi", "qspi-ocp", "rstc_ref";
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			status = "disabled";
+		};
+
+		syscrg: clock-controller@13020000 {
+			compatible = "starfive,jh7110-syscrg";
+			reg = <0x0 0x13020000 0x0 0x10000>;
+			clocks = <&osc>, <&gmac1_rmii_refin>,
+				 <&gmac1_rgmii_rxin>,
+				 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+				 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+				 <&tdm_ext>, <&mclk_ext>,
+				 <&pllclk JH7110_PLLCLK_PLL0_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL1_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>;
+			clock-names = "osc", "gmac1_rmii_refin",
+				      "gmac1_rgmii_rxin",
+				      "i2stx_bclk_ext", "i2stx_lrck_ext",
+				      "i2srx_bclk_ext", "i2srx_lrck_ext",
+				      "tdm_ext", "mclk_ext",
+				      "pll0_out", "pll1_out", "pll2_out";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sys_syscon: syscon@13030000 {
+			compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
+			reg = <0x0 0x13030000 0x0 0x1000>;
+
+			pllclk: clock-controller {
+				compatible = "starfive,jh7110-pll";
+				clocks = <&osc>;
+				#clock-cells = <1>;
+			};
+		};
+
+		sysgpio: pinctrl@13040000 {
+			compatible = "starfive,jh7110-sys-pinctrl";
+			reg = <0x0 0x13040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>;
+			resets = <&syscrg JH7110_SYSRST_IOMUX_APB>;
+			interrupts = <86>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		watchdog@13070000 {
+			compatible = "starfive,jh7110-wdt";
+			reg = <0x0 0x13070000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_WDT_APB>,
+				 <&syscrg JH7110_SYSCLK_WDT_CORE>;
+			clock-names = "apb", "core";
+			resets = <&syscrg JH7110_SYSRST_WDT_APB>,
+				 <&syscrg JH7110_SYSRST_WDT_CORE>;
+		};
+
+		crypto: crypto@16000000 {
+			compatible = "starfive,jh7110-crypto";
+			reg = <0x0 0x16000000 0x0 0x4000>;
+			clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>,
+				 <&stgcrg JH7110_STGCLK_SEC_MISC_AHB>;
+			clock-names = "hclk", "ahb";
+			interrupts = <28>;
+			resets = <&stgcrg JH7110_STGRST_SEC_AHB>;
+			dmas = <&sdma 1 2>, <&sdma 0 2>;
+			dma-names = "tx", "rx";
+		};
+
+		sdma: dma-controller@16008000 {
+			compatible = "arm,pl080", "arm,primecell";
+			arm,primecell-periphid = <0x00041080>;
+			reg = <0x0 0x16008000 0x0 0x4000>;
+			interrupts = <29>;
+			clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>;
+			clock-names = "apb_pclk";
+			resets = <&stgcrg JH7110_STGRST_SEC_AHB>;
+			lli-bus-interface-ahb1;
+			mem-bus-interface-ahb1;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
+
+		rng: rng@1600c000 {
+			compatible = "starfive,jh7110-trng";
+			reg = <0x0 0x1600C000 0x0 0x4000>;
+			clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>,
+				 <&stgcrg JH7110_STGCLK_SEC_MISC_AHB>;
+			clock-names = "hclk", "ahb";
+			resets = <&stgcrg JH7110_STGRST_SEC_AHB>;
+			interrupts = <30>;
+		};
+
+		mmc0: mmc@16010000 {
+			compatible = "starfive,jh7110-mmc";
+			reg = <0x0 0x16010000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>,
+				 <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+			clock-names = "biu","ciu";
+			resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>;
+			reset-names = "reset";
+			interrupts = <74>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			data-addr = <0>;
+			starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@16020000 {
+			compatible = "starfive,jh7110-mmc";
+			reg = <0x0 0x16020000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>,
+				 <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+			clock-names = "biu","ciu";
+			resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>;
+			reset-names = "reset";
+			interrupts = <75>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			data-addr = <0>;
+			starfive,sysreg = <&sys_syscon 0x9c 0x1 0x3e>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@16030000 {
+			compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+			reg = <0x0 0x16030000 0x0 0x10000>;
+			clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>,
+				 <&aoncrg JH7110_AONCLK_GMAC0_AHB>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_PTP>,
+				 <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_GTXC>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+				      "tx", "gtx";
+			resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>,
+				 <&aoncrg JH7110_AONRST_GMAC0_AHB>;
+			reset-names = "stmmaceth", "ahb";
+			interrupts = <7>, <6>, <5>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			rx-fifo-depth = <2048>;
+			tx-fifo-depth = <2048>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <256>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,tso;
+			snps,en-tx-lpi-clockgating;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			starfive,syscon = <&aon_syscon 0xc 0x12>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@16040000 {
+			compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+			reg = <0x0 0x16040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_AHB>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_PTP>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_GTXC>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+				      "tx", "gtx";
+			resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>,
+				 <&syscrg JH7110_SYSRST_GMAC1_AHB>;
+			reset-names = "stmmaceth", "ahb";
+			interrupts = <78>, <77>, <76>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			rx-fifo-depth = <2048>;
+			tx-fifo-depth = <2048>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <256>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,tso;
+			snps,en-tx-lpi-clockgating;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			starfive,syscon = <&sys_syscon 0x90 0x2>;
+			status = "disabled";
+		};
+
+		dma: dma-controller@16050000 {
+			compatible = "starfive,jh7110-axi-dma";
+			reg = <0x0 0x16050000 0x0 0x10000>;
+			clocks = <&stgcrg JH7110_STGCLK_DMA1P_AXI>,
+				 <&stgcrg JH7110_STGCLK_DMA1P_AHB>;
+			clock-names = "core-clk", "cfgr-clk";
+			resets = <&stgcrg JH7110_STGRST_DMA1P_AXI>,
+				 <&stgcrg JH7110_STGRST_DMA1P_AHB>;
+			interrupts = <73>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			snps,dma-masters = <1>;
+			snps,data-width = <3>;
+			snps,block-size = <65536 65536 65536 65536>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <16>;
+		};
+
+		aoncrg: clock-controller@17000000 {
+			compatible = "starfive,jh7110-aoncrg";
+			reg = <0x0 0x17000000 0x0 0x10000>;
+			clocks = <&osc>, <&gmac0_rmii_refin>,
+				 <&gmac0_rgmii_rxin>,
+				 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+				 <&syscrg JH7110_SYSCLK_APB_BUS>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+				 <&rtc_osc>;
+			clock-names = "osc", "gmac0_rmii_refin",
+				      "gmac0_rgmii_rxin", "stg_axiahb",
+				      "apb_bus", "gmac0_gtxclk",
+				      "rtc_osc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		aon_syscon: syscon@17010000 {
+			compatible = "starfive,jh7110-aon-syscon", "syscon";
+			reg = <0x0 0x17010000 0x0 0x1000>;
+			#power-domain-cells = <1>;
+		};
+
+		aongpio: pinctrl@17020000 {
+			compatible = "starfive,jh7110-aon-pinctrl";
+			reg = <0x0 0x17020000 0x0 0x10000>;
+			resets = <&aoncrg JH7110_AONRST_IOMUX>;
+			interrupts = <85>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pwrc: power-controller@17030000 {
+			compatible = "starfive,jh7110-pmu";
+			reg = <0x0 0x17030000 0x0 0x10000>;
+			interrupts = <111>;
+			#power-domain-cells = <1>;
+		};
+
+		ispcrg: clock-controller@19810000 {
+			compatible = "starfive,jh7110-ispcrg";
+			reg = <0x0 0x19810000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
+				 <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>,
+				 <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>,
+				 <&dvp_clk>;
+			clock-names = "isp_top_core", "isp_top_axi",
+				      "noc_bus_isp_axi", "dvp_clk";
+			resets = <&syscrg JH7110_SYSRST_ISP_TOP>,
+				 <&syscrg JH7110_SYSRST_ISP_TOP_AXI>,
+				 <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			power-domains = <&pwrc JH7110_PD_ISP>;
+		};
+
+		voutcrg: clock-controller@295c0000 {
+			compatible = "starfive,jh7110-voutcrg";
+			reg = <0x0 0x295c0000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>,
+				 <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>,
+				 <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>,
+				 <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>,
+				 <&syscrg JH7110_SYSCLK_I2STX0_BCLK>,
+				 <&hdmitx0_pixelclk>;
+			clock-names = "vout_src", "vout_top_ahb",
+				      "vout_top_axi", "vout_top_hdmitx0_mclk",
+				      "i2stx0_bclk", "hdmitx0_pixelclk";
+			resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			power-domains = <&pwrc JH7110_PD_VOUT>;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/thead/Makefile b/arch/riscv/boot/dts/thead/Makefile
new file mode 100644
index 0000000000..b55a17127c
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_THEAD) += th1520-lichee-pi-4a.dtb th1520-beaglev-ahead.dtb
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
new file mode 100644
index 0000000000..70e8042c83
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ * Copyright (C) 2023 Drew Fustini <dfustini@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "th1520.dtsi"
+
+/ {
+	model = "BeagleV Ahead";
+	compatible = "beagle,beaglev-ahead", "thead,th1520";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0  0x00000000  0x1 0x00000000>;
+
+	};
+};
+
+&osc {
+	clock-frequency = <24000000>;
+};
+
+&osc_32k {
+	clock-frequency = <32768>;
+};
+
+&apb_clk {
+	clock-frequency = <62500000>;
+};
+
+&uart_sclk {
+	clock-frequency = <100000000>;
+};
+
+&dmac0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
new file mode 100644
index 0000000000..a802ab1104
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "th1520.dtsi"
+
+/ {
+	model = "Sipeed Lichee Module 4A";
+	compatible = "sipeed,lichee-module-4a", "thead,th1520";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x2 0x00000000>;
+	};
+};
+
+&osc {
+	clock-frequency = <24000000>;
+};
+
+&osc_32k {
+	clock-frequency = <32768>;
+};
+
+&apb_clk {
+	clock-frequency = <62500000>;
+};
+
+&uart_sclk {
+	clock-frequency = <100000000>;
+};
+
+&dmac0 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
new file mode 100644
index 0000000000..9a3884a73e
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include "th1520-lichee-module-4a.dtsi"
+
+/ {
+	model = "Sipeed Lichee Pi 4A";
+	compatible = "sipeed,lichee-pi-4a", "sipeed,lichee-module-4a", "thead,th1520";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
new file mode 100644
index 0000000000..ff364709a6
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 Alibaba Group Holding Limited.
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "thead,th1520";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <3000000>;
+
+		c910_0: cpu@0 {
+			compatible = "thead,c910", "riscv";
+			device_type = "cpu";
+			riscv,isa = "rv64imafdc";
+			reg = <0>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		c910_1: cpu@1 {
+			compatible = "thead,c910", "riscv";
+			device_type = "cpu";
+			riscv,isa = "rv64imafdc";
+			reg = <1>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		c910_2: cpu@2 {
+			compatible = "thead,c910", "riscv";
+			device_type = "cpu";
+			riscv,isa = "rv64imafdc";
+			reg = <2>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		c910_3: cpu@3 {
+			compatible = "thead,c910", "riscv";
+			device_type = "cpu";
+			riscv,isa = "rv64imafdc";
+			reg = <3>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_cache>;
+			mmu-type = "riscv,sv39";
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc_24m";
+		#clock-cells = <0>;
+	};
+
+	osc_32k: 32k-oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc_32k";
+		#clock-cells = <0>;
+	};
+
+	apb_clk: apb-clk-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "apb_clk";
+		#clock-cells = <0>;
+	};
+
+	uart_sclk: uart-sclk-clock {
+		compatible = "fixed-clock";
+		clock-output-names = "uart_sclk";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+		ranges;
+
+		plic: interrupt-controller@ffd8000000 {
+			compatible = "thead,th1520-plic", "thead,c900-plic";
+			reg = <0xff 0xd8000000 0x0 0x01000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <240>;
+		};
+
+		clint: timer@ffdc000000 {
+			compatible = "thead,th1520-clint", "thead,c900-clint";
+			reg = <0xff 0xdc000000 0x0 0x00010000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>;
+		};
+
+		uart0: serial@ffe7014000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xff 0xe7014000 0x0 0x100>;
+			interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_sclk>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@ffe7f00000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xff 0xe7f00000 0x0 0x100>;
+			interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_sclk>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@ffe7f04000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xff 0xe7f04000 0x0 0x100>;
+			interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_sclk>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		gpio2: gpio@ffe7f34000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff 0xe7f34000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio3: gpio@ffe7f38000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff 0xe7f38000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portd: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio0: gpio@ffec005000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff 0xec005000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@ffec006000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff 0xec006000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart2: serial@ffec010000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xff 0xec010000 0x0 0x4000>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_sclk>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@ffefc00000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0xff 0xefc00000 0x0 0x1000>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb_clk>, <&apb_clk>;
+			clock-names = "core-clk", "cfgr-clk";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			snps,block-size = <65536 65536 65536 65536>;
+			snps,priority = <0 1 2 3>;
+			snps,dma-masters = <1>;
+			snps,data-width = <4>;
+			snps,axi-max-burst-len = <16>;
+			status = "disabled";
+		};
+
+		timer0: timer@ffefc32000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xff 0xefc32000 0x0 0x14>;
+			clocks = <&apb_clk>;
+			clock-names = "timer";
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer1: timer@ffefc32014 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xff 0xefc32014 0x0 0x14>;
+			clocks = <&apb_clk>;
+			clock-names = "timer";
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer2: timer@ffefc32028 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xff 0xefc32028 0x0 0x14>;
+			clocks = <&apb_clk>;
+			clock-names = "timer";
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer3: timer@ffefc3203c {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xff 0xefc3203c 0x0 0x14>;
+			clocks = <&apb_clk>;
+			clock-names = "timer";
+			interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@fff7f08000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xff 0xf7f08000 0x0 0x4000>;
+			interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_sclk>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart5: serial@fff7f0c000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xff 0xf7f0c000 0x0 0x4000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_sclk>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		timer4: timer@ffffc33000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xff 0xffc33000 0x0 0x14>;
+			clocks = <&apb_clk>;
+			clock-names = "timer";
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer5: timer@ffffc33014 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xff 0xffc33014 0x0 0x14>;
+			clocks = <&apb_clk>;
+			clock-names = "timer";
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer6: timer@ffffc33028 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xff 0xffc33028 0x0 0x14>;
+			clocks = <&apb_clk>;
+			clock-names = "timer";
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer7: timer@ffffc3303c {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xff 0xffc3303c 0x0 0x14>;
+			clocks = <&apb_clk>;
+			clock-names = "timer";
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ao_gpio0: gpio@fffff41000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff 0xfff41000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porte: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		ao_gpio1: gpio@fffff52000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff 0xfff52000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portf: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh
new file mode 100755
index 0000000000..4c63f3f064
--- /dev/null
+++ b/arch/riscv/boot/install.sh
@@ -0,0 +1,39 @@
+#!/bin/sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the RISC-V Linux port
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+
+if [ "$(basename $2)" = "Image.gz" ]; then
+# Compressed install
+  echo "Installing compressed kernel"
+  base=vmlinuz
+else
+# Normal install
+  echo "Installing normal kernel"
+  base=vmlinux
+fi
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
diff --git a/arch/riscv/boot/loader.S b/arch/riscv/boot/loader.S
new file mode 100644
index 0000000000..dcf88cf44d
--- /dev/null
+++ b/arch/riscv/boot/loader.S
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+	.align 4
+	.section .payload, "ax", %progbits
+	.globl _start
+_start:
+	.incbin "arch/riscv/boot/Image"
+
diff --git a/arch/riscv/boot/loader.lds.S b/arch/riscv/boot/loader.lds.S
new file mode 100644
index 0000000000..62d94696a1
--- /dev/null
+++ b/arch/riscv/boot/loader.lds.S
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+OUTPUT_ARCH(riscv)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = KERNEL_LINK_ADDR;
+
+	.payload : {
+		*(.payload)
+		. = ALIGN(8);
+	}
+}