Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 74 insertions, 41 deletions

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 52a44e3537..26afde0d1e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -28,6 +28,7 @@
 #include <linux/jump_label.h>
 #include <linux/pci.h>
 #include <linux/printk.h>
+#include <linux/lockdep.h>
 
 #include <asm/isc.h>
 #include <asm/airq.h>
@@ -730,12 +731,12 @@ EXPORT_SYMBOL_GPL(zpci_disable_device);
  * equivalent to its state during boot when first probing a driver.
  * Consequently after reset the PCI function requires re-initialization via the
  * common PCI code including re-enabling IRQs via pci_alloc_irq_vectors()
- * and enabling the function via e.g.pci_enablde_device_flags().The caller
+ * and enabling the function via e.g. pci_enable_device_flags(). The caller
  * must guard against concurrent reset attempts.
  *
  * In most cases this function should not be called directly but through
  * pci_reset_function() or pci_reset_bus() which handle the save/restore and
- * locking.
+ * locking - asserted by lockdep.
  *
  * Return: 0 on success and an error value otherwise
  */
@@ -744,6 +745,7 @@ int zpci_hot_reset_device(struct zpci_dev *zdev)
 	u8 status;
 	int rc;
 
+	lockdep_assert_held(&zdev->state_lock);
 	zpci_dbg(3, "rst fid:%x, fh:%x\n", zdev->fid, zdev->fh);
 	if (zdev_enabled(zdev)) {
 		/* Disables device access, DMAs and IRQs (reset state) */
@@ -806,7 +808,8 @@ struct zpci_dev *zpci_create_device(u32 fid, u32 fh, enum zpci_state state)
 	zdev->state =  state;
 
 	kref_init(&zdev->kref);
-	mutex_init(&zdev->lock);
+	mutex_init(&zdev->state_lock);
+	mutex_init(&zdev->fmb_lock);
 	mutex_init(&zdev->kzdev_lock);
 
 	rc = zpci_init_iommu(zdev);
@@ -870,6 +873,10 @@ int zpci_deconfigure_device(struct zpci_dev *zdev)
 {
 	int rc;
 
+	lockdep_assert_held(&zdev->state_lock);
+	if (zdev->state != ZPCI_FN_STATE_CONFIGURED)
+		return 0;
+
 	if (zdev->zbus->bus)
 		zpci_bus_remove_device(zdev, false);
 
@@ -889,7 +896,7 @@ int zpci_deconfigure_device(struct zpci_dev *zdev)
 }
 
 /**
- * zpci_device_reserved() - Mark device as resverved
+ * zpci_device_reserved() - Mark device as reserved
  * @zdev: the zpci_dev that was reserved
  *
  * Handle the case that a given zPCI function was reserved by another system.
@@ -899,8 +906,6 @@ int zpci_deconfigure_device(struct zpci_dev *zdev)
  */
 void zpci_device_reserved(struct zpci_dev *zdev)
 {
-	if (zdev->has_hp_slot)
-		zpci_exit_slot(zdev);
 	/*
 	 * Remove device from zpci_list as it is going away. This also
 	 * makes sure we ignore subsequent zPCI events for this device.
@@ -918,6 +923,9 @@ void zpci_release_device(struct kref *kref)
 	struct zpci_dev *zdev = container_of(kref, struct zpci_dev, kref);
 	int ret;
 
+	if (zdev->has_hp_slot)
+		zpci_exit_slot(zdev);
+
 	if (zdev->zbus->bus)
 		zpci_bus_remove_device(zdev, false);
 
diff --git a/arch/s390/pci/pci_debug.c b/arch/s390/pci/pci_debug.c
index 6dde2263c7..2cb5043a99 100644
--- a/arch/s390/pci/pci_debug.c
+++ b/arch/s390/pci/pci_debug.c
@@ -91,9 +91,9 @@ static int pci_perf_show(struct seq_file *m, void *v)
 	if (!zdev)
 		return 0;
 
-	mutex_lock(&zdev->lock);
+	mutex_lock(&zdev->fmb_lock);
 	if (!zdev->fmb) {
-		mutex_unlock(&zdev->lock);
+		mutex_unlock(&zdev->fmb_lock);
 		seq_puts(m, "FMB statistics disabled\n");
 		return 0;
 	}
@@ -130,7 +130,7 @@ static int pci_perf_show(struct seq_file *m, void *v)
 	}
 
 	pci_sw_counter_show(m);
-	mutex_unlock(&zdev->lock);
+	mutex_unlock(&zdev->fmb_lock);
 	return 0;
 }
 
@@ -148,7 +148,7 @@ static ssize_t pci_perf_seq_write(struct file *file, const char __user *ubuf,
 	if (rc)
 		return rc;
 
-	mutex_lock(&zdev->lock);
+	mutex_lock(&zdev->fmb_lock);
 	switch (val) {
 	case 0:
 		rc = zpci_fmb_disable_device(zdev);
@@ -157,7 +157,7 @@ static ssize_t pci_perf_seq_write(struct file *file, const char __user *ubuf,
 		rc = zpci_fmb_enable_device(zdev);
 		break;
 	}
-	mutex_unlock(&zdev->lock);
+	mutex_unlock(&zdev->fmb_lock);
 	return rc ? rc : count;
 }
 
diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
index 4d9773ef9e..dbe95ec591 100644
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -267,6 +267,7 @@ static void __zpci_event_error(struct zpci_ccdf_err *ccdf)
 	zpci_err_hex(ccdf, sizeof(*ccdf));
 
 	if (zdev) {
+		mutex_lock(&zdev->state_lock);
 		zpci_update_fh(zdev, ccdf->fh);
 		if (zdev->zbus->bus)
 			pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn);
@@ -294,6 +295,8 @@ static void __zpci_event_error(struct zpci_ccdf_err *ccdf)
 	}
 	pci_dev_put(pdev);
 no_pdev:
+	if (zdev)
+		mutex_unlock(&zdev->state_lock);
 	zpci_zdev_put(zdev);
 }
 
@@ -326,6 +329,10 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 
 	zpci_dbg(3, "avl fid:%x, fh:%x, pec:%x\n",
 		 ccdf->fid, ccdf->fh, ccdf->pec);
+
+	if (existing_zdev)
+		mutex_lock(&zdev->state_lock);
+
 	switch (ccdf->pec) {
 	case 0x0301: /* Reserved|Standby -> Configured */
 		if (!zdev) {
@@ -348,7 +355,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 		break;
 	case 0x0303: /* Deconfiguration requested */
 		if (zdev) {
-			/* The event may have been queued before we confirgured
+			/* The event may have been queued before we configured
 			 * the device.
 			 */
 			if (zdev->state != ZPCI_FN_STATE_CONFIGURED)
@@ -359,7 +366,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 		break;
 	case 0x0304: /* Configured -> Standby|Reserved */
 		if (zdev) {
-			/* The event may have been queued before we confirgured
+			/* The event may have been queued before we configured
 			 * the device.:
 			 */
 			if (zdev->state == ZPCI_FN_STATE_CONFIGURED)
@@ -383,8 +390,10 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 	default:
 		break;
 	}
-	if (existing_zdev)
+	if (existing_zdev) {
+		mutex_unlock(&zdev->state_lock);
 		zpci_zdev_put(zdev);
+	}
 }
 
 void zpci_event_availability(void *data)
diff --git a/arch/s390/pci/pci_sysfs.c b/arch/s390/pci/pci_sysfs.c
index 8a7abac518..a0b872b74f 100644
--- a/arch/s390/pci/pci_sysfs.c
+++ b/arch/s390/pci/pci_sysfs.c
@@ -49,6 +49,39 @@ static ssize_t mio_enabled_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(mio_enabled);
 
+static int _do_recover(struct pci_dev *pdev, struct zpci_dev *zdev)
+{
+	u8 status;
+	int ret;
+
+	pci_stop_and_remove_bus_device(pdev);
+	if (zdev_enabled(zdev)) {
+		ret = zpci_disable_device(zdev);
+		/*
+		 * Due to a z/VM vs LPAR inconsistency in the error
+		 * state the FH may indicate an enabled device but
+		 * disable says the device is already disabled don't
+		 * treat it as an error here.
+		 */
+		if (ret == -EINVAL)
+			ret = 0;
+		if (ret)
+			return ret;
+	}
+
+	ret = zpci_enable_device(zdev);
+	if (ret)
+		return ret;
+
+	if (zdev->dma_table) {
+		ret = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
+					 virt_to_phys(zdev->dma_table), &status);
+		if (ret)
+			zpci_disable_device(zdev);
+	}
+	return ret;
+}
+
 static ssize_t recover_store(struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
@@ -56,7 +89,6 @@ static ssize_t recover_store(struct device *dev, struct device_attribute *attr,
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct zpci_dev *zdev = to_zpci(pdev);
 	int ret = 0;
-	u8 status;
 
 	/* Can't use device_remove_self() here as that would lead us to lock
 	 * the pci_rescan_remove_lock while holding the device' kernfs lock.
@@ -70,6 +102,12 @@ static ssize_t recover_store(struct device *dev, struct device_attribute *attr,
 	 */
 	kn = sysfs_break_active_protection(&dev->kobj, &attr->attr);
 	WARN_ON_ONCE(!kn);
+
+	/* Device needs to be configured and state must not change */
+	mutex_lock(&zdev->state_lock);
+	if (zdev->state != ZPCI_FN_STATE_CONFIGURED)
+		goto out;
+
 	/* device_remove_file() serializes concurrent calls ignoring all but
 	 * the first
 	 */
@@ -82,35 +120,13 @@ static ssize_t recover_store(struct device *dev, struct device_attribute *attr,
 	 */
 	pci_lock_rescan_remove();
 	if (pci_dev_is_added(pdev)) {
-		pci_stop_and_remove_bus_device(pdev);
-		if (zdev_enabled(zdev)) {
-			ret = zpci_disable_device(zdev);
-			/*
-			 * Due to a z/VM vs LPAR inconsistency in the error
-			 * state the FH may indicate an enabled device but
-			 * disable says the device is already disabled don't
-			 * treat it as an error here.
-			 */
-			if (ret == -EINVAL)
-				ret = 0;
-			if (ret)
-				goto out;
-		}
-
-		ret = zpci_enable_device(zdev);
-		if (ret)
-			goto out;
-
-		if (zdev->dma_table) {
-			ret = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-						 virt_to_phys(zdev->dma_table), &status);
-			if (ret)
-				zpci_disable_device(zdev);
-		}
+		ret = _do_recover(pdev, zdev);
 	}
-out:
 	pci_rescan_bus(zdev->zbus->bus);
 	pci_unlock_rescan_remove();
+
+out:
+	mutex_unlock(&zdev->state_lock);
 	if (kn)
 		sysfs_unbreak_active_protection(kn);
 	return ret ? ret : count;