Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 1637 insertions, 0 deletions

diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
new file mode 100644
index 0000000000..d78d4904dd
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the R0P7724LC0011/21RL (EcoVec)
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+obj-y	 := setup.o sdram.o
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
new file mode 100644
index 0000000000..d2f269169a
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/sdram.S
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Ecovec24 sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ecovec24_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ecovec24_sdram_enter_end)
+
+	.balign 4
+ENTRY(ecovec24_sdram_leave_start)
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+	ED 0xFD000020, 0x015B0002 /* DBCONF */
+	ED 0xFD000030, 0x03071502 /* DBTR0 */
+	ED 0xFD000034, 0x02020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090405 /* DBTR2 */
+	ED 0xFD00003C, 0x00000002 /* DBTR3 */
+	ED 0xFD000008, 0x00000005 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+	mov	#100,r0
+WAIT_400NS:
+	dt	r0
+	bf	WAIT_400NS
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+	ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+	ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+	ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+	mov	#100,r0
+WAIT_400NS_2:
+	dt	r0
+	bf	WAIT_400NS_2
+
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+	ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+	mov.l	DUMMY,r0
+	mov.l	@r0, r1 /* force single dummy read */
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+	.balign 4
+DUMMY:	.long	0xac400000
+
+ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
new file mode 100644
index 0000000000..7a788d44cc
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -0,0 +1,1519 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ */
+#include <asm/clock.h>
+#include <asm/heartbeat.h>
+#include <asm/suspend.h>
+#include <cpu/sh7724.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/interrupt.h>
+#include <linux/memblock.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_data/sh_mmcif.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_data/gpio_backlight.h>
+#include <linux/platform_data/tsc2007.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/spi/sh_msiof.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/videodev2.h>
+#include <linux/dma-map-ops.h>
+
+#include <media/drv-intf/renesas-ceu.h>
+#include <media/i2c/mt9t112.h>
+#include <media/i2c/tw9910.h>
+
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
+
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ *  Address      Interface        BusWidth
+ *-----------------------------------------
+ *  0x0000_0000  uboot            16bit
+ *  0x0004_0000  Linux romImage   16bit
+ *  0x0014_0000  MTD for Linux    16bit
+ *  0x0400_0000  Internal I/O     16/32bit
+ *  0x0800_0000  DRAM             32bit
+ *  0x1800_0000  MFI              16bit
+ */
+
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect  ON     : write protect
+ *                                  OFF    : No write protect
+ * DS2[2] = RMII / TS, SCIF         ON     : RMII
+ *                                  OFF    : TS, SCIF3
+ * DS2[3] = Camera / Video          ON     : Camera
+ *                                  OFF    : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
+ *                                  OFF    : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD              ON-OFF : SD
+ *                                  OFF-ON : MMC
+ */
+
+/*
+ * FSI - DA7210
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set 'HeadPhone' 80
+ * amixer set 'Out Mixer Left DAC Left' on
+ * amixer set 'Out Mixer Right DAC Right' on
+ */
+
+#define CEU_BUFFER_MEMORY_SIZE		(4 << 20)
+static phys_addr_t ceu0_dma_membase;
+static phys_addr_t ceu1_dma_membase;
+
+/* Heartbeat */
+static unsigned char led_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.nr_bits = 4,
+	.bit_pos = led_pos,
+};
+
+static struct resource heartbeat_resource = {
+	.start  = 0xA405012C, /* PTG */
+	.end    = 0xA405012E - 1,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "boot loader",
+		.offset = 0,
+		.size = (5 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x03ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = evt2irq(0xd60),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8700 */
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+	.ether_link_active_low = 1
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh7724-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+/* USB0 host */
+static void usb0_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB4, power);
+}
+
+static struct r8a66597_platdata usb0_host_data = {
+	.on_chip = 1,
+	.port_power = usb0_port_power,
+};
+
+static struct resource usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_host_resources),
+	.resource	= usb0_host_resources,
+};
+
+/* USB1 host/function */
+static void usb1_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB5, power);
+}
+
+static struct r8a66597_platdata usb1_common_data = {
+	.on_chip = 1,
+	.port_power = usb1_port_power,
+};
+
+static struct resource usb1_common_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb1_common_device = {
+	/* .name will be added in arch_setup */
+	.id		= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_common_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_common_resources),
+	.resource	= usb1_common_resources,
+};
+
+/*
+ * USBHS
+ */
+static int usbhs_get_id(struct platform_device *pdev)
+{
+	return gpio_get_value(GPIO_PTB3);
+}
+
+static int usbhs_phy_reset(struct platform_device *pdev)
+{
+	/* enable vbus if HOST */
+	if (!gpio_get_value(GPIO_PTB3))
+		gpio_set_value(GPIO_PTB5, 1);
+
+	return 0;
+}
+
+static struct renesas_usbhs_platform_info usbhs_info = {
+	.platform_callback = {
+		.get_id		= usbhs_get_id,
+		.phy_reset	= usbhs_phy_reset,
+	},
+	.driver_param = {
+		.buswait_bwait		= 4,
+		.detection_delay	= 5,
+		.d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
+		.d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
+		.d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
+		.d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
+	},
+};
+
+static struct resource usbhs_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhs_device = {
+	.name	= "renesas_usbhs",
+	.id	= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbhs_info,
+	},
+	.num_resources	= ARRAY_SIZE(usbhs_resources),
+	.resource	= usbhs_resources,
+};
+
+/* LCDC and backlight */
+static const struct fb_videomode ecovec_lcd_modes[] = {
+	{
+		.name		= "Panel",
+		.xres		= 800,
+		.yres		= 480,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 70,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync		= 0, /* hsync and vsync are active low */
+	},
+};
+
+static const struct fb_videomode ecovec_dvi_modes[] = {
+	{
+		.name		= "DVI",
+		.xres		= 1280,
+		.yres		= 720,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 40,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync = 0, /* hsync and vsync are active low */
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.interface_type = RGB18,
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.panel_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+static struct gpiod_lookup_table gpio_backlight_lookup = {
+	.dev_id		= "gpio-backlight.0",
+	.table = {
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTR1, NULL, GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
+static struct property_entry gpio_backlight_props[] = {
+	PROPERTY_ENTRY_BOOL("default-on"),
+	{ }
+};
+
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.dev = &lcdc_device.dev,
+};
+
+static const struct platform_device_info gpio_backlight_device_info = {
+	.name = "gpio-backlight",
+	.data = &gpio_backlight_data,
+	.size_data = sizeof(gpio_backlight_data),
+	.properties = gpio_backlight_props,
+};
+
+static struct platform_device *gpio_backlight_device;
+
+/* CEU0 */
+static struct ceu_platform_data ceu0_pdata = {
+	.num_subdevs			= 2,
+	.subdevs = {
+		{ /* [0] = mt9t112  */
+			.flags		= 0,
+			.bus_width	= 8,
+			.bus_shift	= 0,
+			.i2c_adapter_id	= 0,
+			.i2c_address	= 0x3c,
+		},
+		{ /* [1] = tw9910  */
+			.flags		= 0,
+			.bus_width	= 8,
+			.bus_shift	= 0,
+			.i2c_adapter_id	= 0,
+			.i2c_address	= 0x45,
+		},
+	},
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "renesas-ceu",
+	.id             = 0, /* ceu.0 */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &ceu0_pdata,
+	},
+};
+
+/* CEU1 */
+static struct ceu_platform_data ceu1_pdata = {
+	.num_subdevs			= 1,
+	.subdevs = {
+		{ /* [0] = mt9t112  */
+			.flags		= 0,
+			.bus_width	= 8,
+			.bus_shift	= 0,
+			.i2c_adapter_id	= 1,
+			.i2c_address	= 0x3c,
+		},
+	},
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x9e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "renesas-ceu",
+	.id             = 1, /* ceu.1 */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &ceu1_pdata,
+	},
+};
+
+/* Power up/down GPIOs for camera devices and video decoder */
+static struct gpiod_lookup_table tw9910_gpios = {
+	.dev_id		= "0-0045",
+	.table		= {
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTU2, "pdn", GPIO_ACTIVE_HIGH),
+	},
+};
+
+static struct gpiod_lookup_table mt9t112_0_gpios = {
+	.dev_id		= "0-003c",
+	.table		= {
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTA3, "standby",
+			    GPIO_ACTIVE_HIGH),
+	},
+};
+
+static struct gpiod_lookup_table mt9t112_1_gpios = {
+	.dev_id		= "1-003c",
+	.table		= {
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTA4, "standby",
+			    GPIO_ACTIVE_HIGH),
+	},
+};
+
+/* I2C device */
+static struct tw9910_video_info tw9910_info = {
+	.buswidth	= 8,
+	.mpout		= TW9910_MPO_FIELD,
+};
+
+static struct mt9t112_platform_data mt9t112_0_pdata = {
+	.flags = MT9T112_FLAG_PCLK_RISING_EDGE,
+	.divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct mt9t112_platform_data mt9t112_1_pdata = {
+	.flags = MT9T112_FLAG_PCLK_RISING_EDGE,
+	.divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("da7210", 0x1a),
+	},
+	{
+		I2C_BOARD_INFO("tw9910", 0x45),
+		.platform_data = &tw9910_info,
+	},
+	{
+		/* 1st camera */
+		I2C_BOARD_INFO("mt9t112", 0x3c),
+		.platform_data = &mt9t112_0_pdata,
+	},
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("lis3lv02d", 0x1c),
+		.irq = evt2irq(0x620),
+	},
+	{
+		/* 2nd camera */
+		I2C_BOARD_INFO("mt9t112", 0x3c),
+		.platform_data = &mt9t112_1_pdata,
+	},
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 50,
+	.kycr2_delay	= 100,
+	.keycodes	= { KEY_1, 0, 0, 0, 0,
+			    KEY_2, 0, 0, 0, 0,
+			    KEY_3, 0, 0, 0, 0,
+			    KEY_4, 0, 0, 0, 0,
+			    KEY_5, 0, 0, 0, 0,
+			    KEY_6, 0, 0, 0, 0, },
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+/* TouchScreen */
+#define IRQ0 evt2irq(0x600)
+
+static int ts_get_pendown_state(struct device *dev)
+{
+	int val = 0;
+	gpio_free(GPIO_FN_INTC_IRQ0);
+	gpio_request(GPIO_PTZ0, NULL);
+	gpio_direction_input(GPIO_PTZ0);
+
+	val = gpio_get_value(GPIO_PTZ0);
+
+	gpio_free(GPIO_PTZ0);
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	return 0;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	.irq		= IRQ0,
+};
+
+static struct regulator_consumer_supply cn12_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct regulator_init_data cn12_power_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(cn12_power_consumers),
+	.consumer_supplies      = cn12_power_consumers,
+};
+
+static struct fixed_voltage_config cn12_power_info = {
+	.supply_name = "CN12 SD/MMC Vdd",
+	.microvolts = 3300000,
+	.init_data = &cn12_power_init_data,
+};
+
+static struct platform_device cn12_power = {
+	.name = "reg-fixed-voltage",
+	.id   = 0,
+	.dev  = {
+		.platform_data = &cn12_power_info,
+	},
+};
+
+static struct gpiod_lookup_table cn12_power_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.0",
+	.table = {
+		/* Offset 7 on port B */
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+/* SDHI0 */
+static struct regulator_consumer_supply sdhi0_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data sdhi0_power_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(sdhi0_power_consumers),
+	.consumer_supplies      = sdhi0_power_consumers,
+};
+
+static struct fixed_voltage_config sdhi0_power_info = {
+	.supply_name = "CN11 SD/MMC Vdd",
+	.microvolts = 3300000,
+	.init_data = &sdhi0_power_init_data,
+};
+
+static struct platform_device sdhi0_power = {
+	.name = "reg-fixed-voltage",
+	.id   = 1,
+	.dev  = {
+		.platform_data = &sdhi0_power_info,
+	},
+};
+
+static struct gpiod_lookup_table sdhi0_power_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.1",
+	.table = {
+		/* Offset 6 on port B */
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTB6,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table sdhi0_gpio_table = {
+	.dev_id = "sh_mobile_sdhi.0",
+	.table = {
+		/* Card detect */
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTY7, "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct tmio_mmc_data sdhi0_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
+			  MMC_CAP_NEEDS_POLL,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SDHI1 */
+static struct tmio_mmc_data sdhi1_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
+			  MMC_CAP_NEEDS_POLL,
+};
+
+static struct gpiod_lookup_table sdhi1_gpio_table = {
+	.dev_id = "sh_mobile_sdhi.1",
+	.table = {
+		/* Card detect */
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTW7, "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x4e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+};
+#endif /* CONFIG_MMC_SH_MMCIF */
+
+#else
+
+/* MMC SPI */
+static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
+{
+	gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
+}
+
+static struct mmc_spi_platform_data mmc_spi_info = {
+	.caps = MMC_CAP_NEEDS_POLL,
+	.caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
+	.setpower = mmc_spi_setpower,
+};
+
+static struct gpiod_lookup_table mmc_spi_gpio_table = {
+	.dev_id = "mmc_spi.0", /* device "mmc_spi" @ CS0 */
+	.table = {
+		/* Card detect */
+		GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY7, NULL, 0,
+				GPIO_ACTIVE_LOW),
+		/* Write protect */
+		GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY6, NULL, 1,
+				GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct spi_board_info spi_bus[] = {
+	{
+		.modalias	= "mmc_spi",
+		.platform_data	= &mmc_spi_info,
+		.max_speed_hz	= 5000000,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+/* MSIOF0 */
+static struct sh_msiof_spi_info msiof0_data = {
+	.num_chipselect = 1,
+};
+
+static struct resource msiof0_resources[] = {
+	[0] = {
+		.name	= "MSIOF0",
+		.start	= 0xa4c40000,
+		.end	= 0xa4c40063,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xc80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device msiof0_device = {
+	.name		= "spi_sh_msiof",
+	.id		= 0, /* MSIOF0 */
+	.dev = {
+		.platform_data = &msiof0_data,
+	},
+	.num_resources	= ARRAY_SIZE(msiof0_resources),
+	.resource	= msiof0_resources,
+};
+
+static struct gpiod_lookup_table msiof_gpio_table = {
+	.dev_id = "spi_sh_msiof.0",
+	.table = {
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTM4, "cs", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+#endif
+
+/* FSI */
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xf80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+};
+
+static struct asoc_simple_card_info fsi_da7210_info = {
+	.name		= "DA7210",
+	.card		= "FSIB-DA7210",
+	.codec		= "da7210.0-001a",
+	.platform	= "sh_fsi.0",
+	.daifmt		= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBP_CFP,
+	.cpu_dai = {
+		.name	= "fsib-dai",
+	},
+	.codec_dai = {
+		.name	= "da7210-hifi",
+	},
+};
+
+static struct platform_device fsi_da7210_device = {
+	.name	= "asoc-simple-card",
+	.dev	= {
+		.platform_data	= &fsi_da7210_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_da7210_device.dev.coherent_dma_mask,
+	},
+};
+
+
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.name	= "IrDA",
+		.start  = 0xA45D0000,
+		.end    = 0xA45D0049,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_sir",
+	.num_resources  = ARRAY_SIZE(irda_resources),
+	.resource       = irda_resources,
+};
+
+#include <media/i2c/ak881x.h>
+#include <media/drv-intf/sh_vou.h>
+
+static struct ak881x_pdata ak881x_pdata = {
+	.flags = AK881X_IF_MODE_SLAVE,
+};
+
+static struct i2c_board_info ak8813 = {
+	I2C_BOARD_INFO("ak8813", 0x20),
+	.platform_data = &ak881x_pdata,
+};
+
+static struct sh_vou_pdata sh_vou_pdata = {
+	.bus_fmt	= SH_VOU_BUS_8BIT,
+	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
+	.board_info	= &ak8813,
+	.i2c_adap	= 0,
+};
+
+static struct resource sh_vou_resources[] = {
+	[0] = {
+		.start  = 0xfe960000,
+		.end    = 0xfe962043,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x8e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vou_device = {
+	.name           = "sh-vou",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sh_vou_resources),
+	.resource       = sh_vou_resources,
+	.dev		= {
+		.platform_data	= &sh_vou_pdata,
+	},
+};
+
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xA4CA0000,
+		.end	= 0xA4CA00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC2I */
+		.start	= evt2irq(0x5a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC3I */
+		.start	= evt2irq(0x5c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+#endif
+
+static struct platform_device *ecovec_ceu_devices[] __initdata = {
+	&ceu0_device,
+	&ceu1_device,
+};
+
+static struct platform_device *ecovec_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&sh_eth_device,
+	&usb0_host_device,
+	&usb1_common_device,
+	&usbhs_device,
+	&lcdc_device,
+	&keysc_device,
+	&cn12_power,
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	&sdhi0_power,
+	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	&sdhi1_device,
+#endif
+#else
+	&msiof0_device,
+#endif
+	&fsi_device,
+	&fsi_da7210_device,
+	&irda_device,
+	&vou_device,
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	&sh_mmcif_device,
+#endif
+};
+
+#ifdef CONFIG_I2C
+#define EEPROM_ADDR 0x50
+static u8 mac_read(struct i2c_adapter *a, u8 command)
+{
+	struct i2c_msg msg[2];
+	u8 buf;
+	int ret;
+
+	msg[0].addr  = EEPROM_ADDR;
+	msg[0].flags = 0;
+	msg[0].len   = 1;
+	msg[0].buf   = &command;
+
+	msg[1].addr  = EEPROM_ADDR;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len   = 1;
+	msg[1].buf   = &buf;
+
+	ret = i2c_transfer(a, msg, 2);
+	if (ret < 0) {
+		printk(KERN_ERR "error %d\n", ret);
+		buf = 0xff;
+	}
+
+	return buf;
+}
+
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+	struct i2c_adapter *a = i2c_get_adapter(1);
+	int i;
+
+	if (!a) {
+		pr_err("can not get I2C 1\n");
+		return;
+	}
+
+	/* read MAC address from EEPROM */
+	for (i = 0; i < sizeof(pd->mac_addr); i++) {
+		pd->mac_addr[i] = mac_read(a, 0x10 + i);
+		msleep(10);
+	}
+
+	i2c_put_adapter(a);
+}
+#else
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+	pr_err("unable to read sh_eth MAC address\n");
+}
+#endif
+
+#define PORT_HIZA 0xA4050158
+#define IODRIVEA  0xA405018A
+
+extern char ecovec24_sdram_enter_start;
+extern char ecovec24_sdram_enter_end;
+extern char ecovec24_sdram_leave_start;
+extern char ecovec24_sdram_leave_end;
+
+static int __init arch_setup(void)
+{
+	struct clk *clk;
+	bool cn12_enabled = false;
+
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&ecovec24_sdram_enter_start,
+					&ecovec24_sdram_enter_end,
+					&ecovec24_sdram_leave_start,
+					&ecovec24_sdram_leave_end);
+
+	/* enable STATUS0, STATUS2 and PDSTATUS */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+	gpio_request(GPIO_FN_STATUS2, NULL);
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+
+	/* enable debug LED */
+	gpio_request(GPIO_PTG0, NULL);
+	gpio_request(GPIO_PTG1, NULL);
+	gpio_request(GPIO_PTG2, NULL);
+	gpio_request(GPIO_PTG3, NULL);
+	gpio_direction_output(GPIO_PTG0, 0);
+	gpio_direction_output(GPIO_PTG1, 0);
+	gpio_direction_output(GPIO_PTG2, 0);
+	gpio_direction_output(GPIO_PTG3, 0);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+
+	/* enable SH-Eth */
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_output(GPIO_PTA1, 1);
+	mdelay(20);
+
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_FN_LNKSTA,       NULL);
+
+	/* enable USB */
+	__raw_writew(0x0000, 0xA4D80000);
+	__raw_writew(0x0000, 0xA4D90000);
+	gpio_request(GPIO_PTB3,  NULL);
+	gpio_request(GPIO_PTB4,  NULL);
+	gpio_request(GPIO_PTB5,  NULL);
+	gpio_direction_input(GPIO_PTB3);
+	gpio_direction_output(GPIO_PTB4, 0);
+	gpio_direction_output(GPIO_PTB5, 0);
+	__raw_writew(0x0600, 0xa40501d4);
+	__raw_writew(0x0600, 0xa4050192);
+
+	if (gpio_get_value(GPIO_PTB3)) {
+		printk(KERN_INFO "USB1 function is selected\n");
+		usb1_common_device.name = "r8a66597_udc";
+	} else {
+		printk(KERN_INFO "USB1 host is selected\n");
+		usb1_common_device.name = "r8a66597_hcd";
+	}
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	gpio_request(GPIO_PTE6, NULL);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_request(GPIO_PTA2, NULL);
+	gpio_direction_input(GPIO_PTE6);
+	gpio_direction_output(GPIO_PTU1, 0);
+	gpio_direction_output(GPIO_PTA2, 0);
+
+	/* I/O buffer drive ability is high */
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
+
+	if (gpio_get_value(GPIO_PTE6)) {
+		/* DVI */
+		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
+		lcdc_info.ch[0].clock_divider		= 1;
+		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
+
+		/* No backlight */
+		gpio_backlight_data.dev = NULL;
+
+		gpio_set_value(GPIO_PTA2, 1);
+		gpio_set_value(GPIO_PTU1, 1);
+	} else {
+		/* Panel */
+		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+		lcdc_info.ch[0].clock_divider		= 2;
+		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
+
+		/* FIXME
+		 *
+		 * LCDDON control is needed for Panel,
+		 * but current sh_mobile_lcdc driver doesn't control it.
+		 * It is temporary correspondence
+		 */
+		gpio_request(GPIO_PTF4, NULL);
+		gpio_direction_output(GPIO_PTF4, 1);
+
+		/* enable TouchScreen */
+		i2c_register_board_info(0, &ts_i2c_clients, 1);
+		irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
+	}
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+
+	/* enable user debug switch */
+	gpio_request(GPIO_PTR0, NULL);
+	gpio_request(GPIO_PTR4, NULL);
+	gpio_request(GPIO_PTR5, NULL);
+	gpio_request(GPIO_PTR6, NULL);
+	gpio_direction_input(GPIO_PTR0);
+	gpio_direction_input(GPIO_PTR4);
+	gpio_direction_input(GPIO_PTR5);
+	gpio_direction_input(GPIO_PTR6);
+
+	/* SD-card slot CN11 */
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	/* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
+	gpio_request(GPIO_FN_SDHI0WP,  NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+	gpio_request(GPIO_FN_SDHI0D3,  NULL);
+	gpio_request(GPIO_FN_SDHI0D2,  NULL);
+	gpio_request(GPIO_FN_SDHI0D1,  NULL);
+	gpio_request(GPIO_FN_SDHI0D0,  NULL);
+#else
+	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
+	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
+	gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
+	gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
+	gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
+	gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
+
+	gpiod_add_lookup_table(&mmc_spi_gpio_table);
+	gpiod_add_lookup_table(&msiof_gpio_table);
+	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+#endif
+
+	/* MMC/SD-card slot CN12 */
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+	gpio_request(GPIO_FN_MMC_D7, NULL);
+	gpio_request(GPIO_FN_MMC_D6, NULL);
+	gpio_request(GPIO_FN_MMC_D5, NULL);
+	gpio_request(GPIO_FN_MMC_D4, NULL);
+	gpio_request(GPIO_FN_MMC_D3, NULL);
+	gpio_request(GPIO_FN_MMC_D2, NULL);
+	gpio_request(GPIO_FN_MMC_D1, NULL);
+	gpio_request(GPIO_FN_MMC_D0, NULL);
+	gpio_request(GPIO_FN_MMC_CLK, NULL);
+	gpio_request(GPIO_FN_MMC_CMD, NULL);
+
+	cn12_enabled = true;
+#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
+	gpio_request(GPIO_FN_SDHI1WP,  NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+	gpio_request(GPIO_FN_SDHI1D3,  NULL);
+	gpio_request(GPIO_FN_SDHI1D2,  NULL);
+	gpio_request(GPIO_FN_SDHI1D1,  NULL);
+	gpio_request(GPIO_FN_SDHI1D0,  NULL);
+
+	cn12_enabled = true;
+#endif
+
+	if (cn12_enabled)
+		/* I/O buffer drive ability is high for CN12 */
+		__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
+			     IODRIVEA);
+
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKB,    NULL);
+	gpio_request(GPIO_FN_FSIIBSD,    NULL);
+	gpio_request(GPIO_FN_FSIOBSD,    NULL);
+	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+
+	/* set SPU2 clock to 83.4 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 83333333));
+		clk_put(clk);
+	}
+
+	/* change parent of FSI B */
+	clk = clk_get(NULL, "fsib_clk");
+	if (!IS_ERR(clk)) {
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimckb_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimckb_clk);
+		clk_set_rate(clk, 48000);
+		clk_put(clk);
+	}
+
+	gpio_request(GPIO_PTU0, NULL);
+	gpio_direction_output(GPIO_PTU0, 0);
+	mdelay(20);
+
+	/* enable motion sensor */
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
+	/* set VPU clock to 166 MHz */
+	clk = clk_get(NULL, "vpu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 166000000));
+		clk_put(clk);
+	}
+
+	/* enable IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN,  NULL);
+	gpio_request(GPIO_PTU5, NULL);
+	gpio_direction_output(GPIO_PTU5, 0);
+
+	/* Register gpio lookup tables for cameras and video decoder */
+	gpiod_add_lookup_table(&tw9910_gpios);
+	gpiod_add_lookup_table(&mt9t112_0_gpios);
+	gpiod_add_lookup_table(&mt9t112_1_gpios);
+
+	/* enable I2C device */
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
+	/* VOU */
+	gpio_request(GPIO_FN_DV_D15, NULL);
+	gpio_request(GPIO_FN_DV_D14, NULL);
+	gpio_request(GPIO_FN_DV_D13, NULL);
+	gpio_request(GPIO_FN_DV_D12, NULL);
+	gpio_request(GPIO_FN_DV_D11, NULL);
+	gpio_request(GPIO_FN_DV_D10, NULL);
+	gpio_request(GPIO_FN_DV_D9, NULL);
+	gpio_request(GPIO_FN_DV_D8, NULL);
+	gpio_request(GPIO_FN_DV_CLKI, NULL);
+	gpio_request(GPIO_FN_DV_CLK, NULL);
+	gpio_request(GPIO_FN_DV_VSYNC, NULL);
+	gpio_request(GPIO_FN_DV_HSYNC, NULL);
+
+	/* AK8813 power / reset sequence */
+	gpio_request(GPIO_PTG4, NULL);
+	gpio_request(GPIO_PTU3, NULL);
+	/* Reset */
+	gpio_direction_output(GPIO_PTG4, 0);
+	/* Power down */
+	gpio_direction_output(GPIO_PTU3, 1);
+
+	udelay(10);
+
+	/* Power up, reset */
+	gpio_set_value(GPIO_PTU3, 0);
+
+	udelay(10);
+
+	/* Remove reset */
+	gpio_set_value(GPIO_PTG4, 1);
+#endif
+
+	/* Initialize CEU platform devices separately to map memory first */
+	device_initialize(&ecovec_ceu_devices[0]->dev);
+	dma_declare_coherent_memory(&ecovec_ceu_devices[0]->dev,
+				    ceu0_dma_membase, ceu0_dma_membase,
+				    CEU_BUFFER_MEMORY_SIZE);
+	platform_device_add(ecovec_ceu_devices[0]);
+
+	device_initialize(&ecovec_ceu_devices[1]->dev);
+	dma_declare_coherent_memory(&ecovec_ceu_devices[1]->dev,
+				    ceu1_dma_membase, ceu1_dma_membase,
+				    CEU_BUFFER_MEMORY_SIZE);
+	platform_device_add(ecovec_ceu_devices[1]);
+
+	gpiod_add_lookup_table(&cn12_power_gpiod_table);
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	gpiod_add_lookup_table(&sdhi0_power_gpiod_table);
+	gpiod_add_lookup_table(&sdhi0_gpio_table);
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	gpiod_add_lookup_table(&sdhi1_gpio_table);
+#endif
+#endif
+
+	gpiod_add_lookup_table(&gpio_backlight_lookup);
+	gpio_backlight_device = platform_device_register_full(
+					&gpio_backlight_device_info);
+	if (IS_ERR(gpio_backlight_device))
+		return PTR_ERR(gpio_backlight_device);
+
+	return platform_add_devices(ecovec_devices,
+				    ARRAY_SIZE(ecovec_devices));
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	sh_eth_init(&sh_eth_plat);
+	return 0;
+}
+device_initcall(devices_setup);
+
+/* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
+static void __init ecovec_mv_mem_reserve(void)
+{
+	phys_addr_t phys;
+	phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
+
+	phys = memblock_phys_alloc(size, PAGE_SIZE);
+	if (!phys)
+		panic("Failed to allocate CEU0 memory\n");
+
+	memblock_phys_free(phys, size);
+	memblock_remove(phys, size);
+	ceu0_dma_membase = phys;
+
+	phys = memblock_phys_alloc(size, PAGE_SIZE);
+	if (!phys)
+		panic("Failed to allocate CEU1 memory\n");
+
+	memblock_phys_free(phys, size);
+	memblock_remove(phys, size);
+	ceu1_dma_membase = phys;
+}
+
+static struct sh_machine_vector mv_ecovec __initmv = {
+	.mv_name	= "R0P7724 (EcoVec)",
+	.mv_mem_reserve	= ecovec_mv_mem_reserve,
+};