Adding upstream version 6.7.7.upstream/6.7.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

31 files changed, 34 insertions, 1297 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 33530b0449..7500521b2b 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -124,8 +124,7 @@ config ARCH_HAS_ILOG2_U64
 
 config NO_IOPORT_MAP
 	def_bool !PCI
-	depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \
-		   !SH_SOLUTION_ENGINE
+	depends on !SH_SHMIN && !SH_HP6XX && !SH_SOLUTION_ENGINE
 
 config IO_TRAPPED
 	bool
@@ -384,10 +383,6 @@ config CPU_SUBTYPE_SH7760
 	bool "Support SH7760 processor"
 	select CPU_SH4
 
-config CPU_SUBTYPE_SH4_202
-	bool "Support SH4-202 processor"
-	select CPU_SH4
-
 # SH-4A Processor Support
 
 config CPU_SUBTYPE_SH7723
@@ -518,7 +513,6 @@ config SH_PCLK_FREQ
 			      CPU_SUBTYPE_SH7263 || \
 			      CPU_SUBTYPE_MXG
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
-	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
 	help
 	  This option is used to specify the peripheral clock frequency.
@@ -743,10 +737,6 @@ endmenu
 
 menu "Bus options"
 
-config SUPERHYWAY
-	tristate "SuperHyway Bus support"
-	depends on CPU_SUBTYPE_SH4_202
-
 config MAPLE
 	bool "Maple Bus support"
 	depends on SH_DREAMCAST
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index fafe15d3ba..109bec4dad 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -289,13 +289,6 @@ config SH_EDOSK7760
 	  Select if configuring for a Renesas EDOSK7760
 	  evaluation board.
 
-config SH_SH4202_MICRODEV
-	bool "SH4-202 MicroDev"
-	depends on CPU_SUBTYPE_SH4_202
-	help
-	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-	  with an SH4-202 CPU.
-
 config SH_LANDISK
 	bool "LANDISK"
 	depends on CPU_SUBTYPE_SH7751R
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index b57219436a..fbbc350ca8 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_SH_SDK7780)	+= mach-sdk7780/
 obj-$(CONFIG_SH_SDK7786)	+= mach-sdk7786/
 obj-$(CONFIG_SH_X3PROTO)	+= mach-x3proto/
 obj-$(CONFIG_SH_SH7763RDP)	+= mach-sh7763rdp/
-obj-$(CONFIG_SH_SH4202_MICRODEV)+= mach-microdev/
 obj-$(CONFIG_SH_LANDISK)	+= mach-landisk/
 obj-$(CONFIG_SH_LBOX_RE2)	+= mach-lboxre2/
 obj-$(CONFIG_SH_RSK)		+= mach-rsk/
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 7a788d44cc..30d117f9ad 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -881,7 +881,7 @@ static struct platform_device fsi_device = {
 	.resource	= fsi_resources,
 };
 
-static struct asoc_simple_card_info fsi_da7210_info = {
+static struct simple_util_info fsi_da7210_info = {
 	.name		= "DA7210",
 	.card		= "FSIB-DA7210",
 	.codec		= "da7210.0-001a",
diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
deleted file mode 100644
index 05c5698dca..0000000000
--- a/arch/sh/boards/mach-microdev/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH MicroDev specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
deleted file mode 100644
index 2a04f72dd1..0000000000
--- a/arch/sh/boards/mach-microdev/fdc37c93xapm.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Setup for the SMSC FDC37C93xAPM
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <mach/microdev.h>
-
-#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
-#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY	 0x55
-#define SMSC_EXIT_CONFIG_KEY	 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX	 0x07	/* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
-#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
-#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
-#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
-#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
-#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
-#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE	0x03f8
-#define SERIAL2_PRIMARY_BASE	0x02f8
-
-#define	MSB(x)		( (x) >> 8 )
-#define	LSB(x)		( (x) & 0xff )
-
-	/* General-Purpose base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
-
-static int __init smsc_superio_setup(void)
-{
-
-	unsigned char devid, devrev;
-
-		/* Initially the chip is in run state */
-		/* Put it into configuration state */
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-		/* Read device ID info */
-	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-
-	if ((devid == 0x30) && (devrev == 0x01))
-		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
-	else
-		return -ENODEV;
-
-		/* Select the keyboard device */
-	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
-		/* Select the Serial #1 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the Serial #2 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#1 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#2 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the configuration registers */
-	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
-		/* enable the appropriate GPIO pins for IDE functionality:
-		 * bit[0]   In/Out		1==input;  0==output
-		 * bit[1]   Polarity		1==invert; 0==no invert
-		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
-		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
-		 */
-	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
-	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
-	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
-	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
-	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
-
-		/* Exit the configuration state */
-	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	return 0;
-}
-device_initcall(smsc_superio_setup);
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
deleted file mode 100644
index a76c12721e..0000000000
--- a/arch/sh/boards/mach-microdev/io.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/superh/microdev/io.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
-	/*
-	 *	we need to have a 'safe' address to re-direct all I/O requests
-	 *	that we do not explicitly wish to handle. This safe address
-	 *	must have the following properies:
-	 *
-	 *		* writes are ignored (no exception)
-	 *		* reads are benign (no side-effects)
-	 *		* accesses of width 1, 2 and 4-bytes are all valid.
-	 *
-	 *	The Processor Version Register (PVR) has these properties.
-	 */
-#define	PVR	0xff000030	/* Processor Version Register */
-
-
-#define	IO_IDE2_BASE		0x170ul	/* I/O base for SMSC FDC37C93xAPM IDE #2 */
-#define	IO_IDE1_BASE		0x1f0ul	/* I/O base for SMSC FDC37C93xAPM IDE #1 */
-#define IO_ISP1161_BASE		0x290ul /* I/O port for Philips ISP1161x USB chip */
-#define IO_SERIAL2_BASE		0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
-#define	IO_LAN91C111_BASE	0x300ul	/* I/O base for SMSC LAN91C111 Ethernet chip */
-#define	IO_IDE2_MISC		0x376ul	/* I/O misc for SMSC FDC37C93xAPM IDE #2 */
-#define IO_SUPERIO_BASE		0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
-#define	IO_IDE1_MISC		0x3f6ul	/* I/O misc for SMSC FDC37C93xAPM IDE #1 */
-#define IO_SERIAL1_BASE		0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
-
-#define	IO_ISP1161_EXTENT	0x04ul	/* I/O extent for Philips ISP1161x USB chip */
-#define	IO_LAN91C111_EXTENT	0x10ul	/* I/O extent for SMSC LAN91C111 Ethernet chip */
-#define	IO_SUPERIO_EXTENT	0x02ul	/* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
-#define	IO_IDE_EXTENT		0x08ul	/* I/O extent for IDE Task Register set */
-#define IO_SERIAL_EXTENT	0x10ul
-
-#define	IO_LAN91C111_PHYS	0xa7500000ul	/* Physical address of SMSC LAN91C111 Ethernet chip */
-#define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */
-#define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
-{
-	unsigned long result;
-
-	if ((offset >= IO_LAN91C111_BASE) &&
-	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 *	SMSC LAN91C111 Ethernet chip
-			 */
-		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
-	} else if ((offset >= IO_SUPERIO_BASE) &&
-		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Configuration Registers
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if (((offset >= IO_IDE1_BASE) &&
-		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE1_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #1
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if (((offset >= IO_IDE2_BASE) &&
-		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE2_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #2
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL1_BASE) &&
-		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #1
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL2_BASE) &&
-		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #2
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_ISP1161_BASE) &&
-		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
-			/*
-			 *	Philips USB ISP1161x chip
-			 */
-		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
-	} else {
-			/*
-			 *	safe default.
-			 */
-		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
-		       __func__, offset);
-		result = PVR;
-	}
-
-	return (void __iomem *)result;
-}
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
deleted file mode 100644
index dc27492c83..0000000000
--- a/arch/sh/boards/mach-microdev/irq.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/irq.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
-#define NUM_EXTERNAL_IRQS 16	/* IRL0 .. IRL15 */
-
-static const struct {
-	unsigned char fpgaIrq;
-	unsigned char mapped;
-	const char *name;
-} fpgaIrqTable[NUM_EXTERNAL_IRQS] = {
-	{ 0,				0,	"unused"   },		/* IRQ #0	IRL=15	0x200  */
-	{ MICRODEV_FPGA_IRQ_KEYBOARD,	1,	"keyboard" },		/* IRQ #1	IRL=14	0x220  */
-	{ MICRODEV_FPGA_IRQ_SERIAL1,	1,	"Serial #1"},		/* IRQ #2	IRL=13	0x240  */
-	{ MICRODEV_FPGA_IRQ_ETHERNET,	1,	"Ethernet" },		/* IRQ #3	IRL=12	0x260  */
-	{ MICRODEV_FPGA_IRQ_SERIAL2,	0,	"Serial #2"},		/* IRQ #4	IRL=11	0x280  */
-	{ 0,				0,	"unused"   },		/* IRQ #5	IRL=10	0x2a0  */
-	{ 0,				0,	"unused"   },		/* IRQ #6	IRL=9	0x2c0  */
-	{ MICRODEV_FPGA_IRQ_USB_HC,	1,	"USB"	   },		/* IRQ #7	IRL=8	0x2e0  */
-	{ MICRODEV_IRQ_PCI_INTA,	1,	"PCI INTA" },		/* IRQ #8	IRL=7	0x300  */
-	{ MICRODEV_IRQ_PCI_INTB,	1,	"PCI INTB" },		/* IRQ #9	IRL=6	0x320  */
-	{ MICRODEV_IRQ_PCI_INTC,	1,	"PCI INTC" },		/* IRQ #10	IRL=5	0x340  */
-	{ MICRODEV_IRQ_PCI_INTD,	1,	"PCI INTD" },		/* IRQ #11	IRL=4	0x360  */
-	{ MICRODEV_FPGA_IRQ_MOUSE,	1,	"mouse"    },		/* IRQ #12	IRL=3	0x380  */
-	{ MICRODEV_FPGA_IRQ_IDE2,	1,	"IDE #2"   },		/* IRQ #13	IRL=2	0x3a0  */
-	{ MICRODEV_FPGA_IRQ_IDE1,	1,	"IDE #1"   },		/* IRQ #14	IRL=1	0x3c0  */
-	{ 0,				0,	"unused"   },		/* IRQ #15	IRL=0	0x3e0  */
-};
-
-#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1)
-#  error Inconsistancy in defining the IRQ# for Keyboard!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_ETHERNET != 3)
-#  error Inconsistancy in defining the IRQ# for Ethernet!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_USB_HC != 7)
-#  error Inconsistancy in defining the IRQ# for USB!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_MOUSE != 12)
-#  error Inconsistancy in defining the IRQ# for PS/2 Mouse!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE2 != 13)
-#  error Inconsistancy in defining the IRQ# for secondary IDE!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE1 != 14)
-#  error Inconsistancy in defining the IRQ# for primary IDE!
-#endif
-
-static void disable_microdev_irq(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned int fpgaIrq;
-
-	if (irq >= NUM_EXTERNAL_IRQS)
-		return;
-	if (!fpgaIrqTable[irq].mapped)
-		return;
-
-	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-
-	/* disable interrupts on the FPGA INTC register */
-	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
-}
-
-static void enable_microdev_irq(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned long priorityReg, priorities, pri;
-	unsigned int fpgaIrq;
-
-	if (unlikely(irq >= NUM_EXTERNAL_IRQS))
-		return;
-	if (unlikely(!fpgaIrqTable[irq].mapped))
-		return;
-
-	pri = 15 - irq;
-
-	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-	priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
-
-	/* set priority for the interrupt */
-	priorities = __raw_readl(priorityReg);
-	priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
-	priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
-	__raw_writel(priorities, priorityReg);
-
-	/* enable interrupts on the FPGA INTC register */
-	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
-}
-
-static struct irq_chip microdev_irq_type = {
-	.name = "MicroDev-IRQ",
-	.irq_unmask = enable_microdev_irq,
-	.irq_mask = disable_microdev_irq,
-};
-
-/* This function sets the desired irq handler to be a MicroDev type */
-static void __init make_microdev_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_set_chip_and_handler(irq, &microdev_irq_type, handle_level_irq);
-	disable_microdev_irq(irq_get_irq_data(irq));
-}
-
-extern void __init init_microdev_irq(void)
-{
-	int i;
-
-	/* disable interrupts on the FPGA INTC register */
-	__raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
-
-	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
-		make_microdev_irq(i);
-}
-
-extern void microdev_print_fpga_intc_status(void)
-{
-	volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG;
-	volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG;
-	volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0);
-	volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8);
-	volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16);
-	volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24);
-	volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG;
-	volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG;
-
-	printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n");
-	printk("FPGA_INTENB = 0x%08x\n", *intenb);
-	printk("FPGA_INTDSB = 0x%08x\n", *intdsb);
-	printk("FPGA_INTSRC = 0x%08x\n", *intsrc);
-	printk("FPGA_INTREQ = 0x%08x\n", *intreq);
-	printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
-	printk("-------------------------------------------------------------------------------\n");
-}
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
deleted file mode 100644
index f4a777fe2d..0000000000
--- a/arch/sh/boards/mach-microdev/setup.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/setup.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <video/s1d13xxxfb.h>
-#include <mach/microdev.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= 0x300,
-		.end		= 0x300 + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= MICRODEV_LINUX_IRQ_ETHERNET,
-		.end		= MICRODEV_LINUX_IRQ_ETHERNET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct s1d13xxxfb_regval s1d13806_initregs[] = {
-	{ S1DREG_MISC,			0x00 },
-	{ S1DREG_COM_DISP_MODE,		0x00 },
-	{ S1DREG_GPIO_CNF0,		0x00 },
-	{ S1DREG_GPIO_CNF1,		0x00 },
-	{ S1DREG_GPIO_CTL0,		0x00 },
-	{ S1DREG_GPIO_CTL1,		0x00 },
-	{ S1DREG_CLK_CNF,		0x02 },
-	{ S1DREG_LCD_CLK_CNF,		0x01 },
-	{ S1DREG_CRT_CLK_CNF,		0x03 },
-	{ S1DREG_MPLUG_CLK_CNF,		0x03 },
-	{ S1DREG_CPU2MEM_WST_SEL,	0x02 },
-	{ S1DREG_SDRAM_REF_RATE,	0x03 },
-	{ S1DREG_SDRAM_TC0,		0x00 },
-	{ S1DREG_SDRAM_TC1,		0x01 },
-	{ S1DREG_MEM_CNF,		0x80 },
-	{ S1DREG_PANEL_TYPE,		0x25 },
-	{ S1DREG_MOD_RATE,		0x00 },
-	{ S1DREG_LCD_DISP_HWIDTH,	0x63 },
-	{ S1DREG_LCD_NDISP_HPER,	0x1e },
-	{ S1DREG_TFT_FPLINE_START,	0x06 },
-	{ S1DREG_TFT_FPLINE_PWIDTH,	0x03 },
-	{ S1DREG_LCD_DISP_VHEIGHT0,	0x57 },
-	{ S1DREG_LCD_DISP_VHEIGHT1,	0x02 },
-	{ S1DREG_LCD_NDISP_VPER,	0x00 },
-	{ S1DREG_TFT_FPFRAME_START,	0x0a },
-	{ S1DREG_TFT_FPFRAME_PWIDTH,	0x81 },
-	{ S1DREG_LCD_DISP_MODE,		0x03 },
-	{ S1DREG_LCD_MISC,		0x00 },
-	{ S1DREG_LCD_DISP_START0,	0x00 },
-	{ S1DREG_LCD_DISP_START1,	0x00 },
-	{ S1DREG_LCD_DISP_START2,	0x00 },
-	{ S1DREG_LCD_MEM_OFF0,		0x90 },
-	{ S1DREG_LCD_MEM_OFF1,		0x01 },
-	{ S1DREG_LCD_PIX_PAN,		0x00 },
-	{ S1DREG_LCD_DISP_FIFO_HTC,	0x00 },
-	{ S1DREG_LCD_DISP_FIFO_LTC,	0x00 },
-	{ S1DREG_CRT_DISP_HWIDTH,	0x63 },
-	{ S1DREG_CRT_NDISP_HPER,	0x1f },
-	{ S1DREG_CRT_HRTC_START,	0x04 },
-	{ S1DREG_CRT_HRTC_PWIDTH,	0x8f },
-	{ S1DREG_CRT_DISP_VHEIGHT0,	0x57 },
-	{ S1DREG_CRT_DISP_VHEIGHT1,	0x02 },
-	{ S1DREG_CRT_NDISP_VPER,	0x1b },
-	{ S1DREG_CRT_VRTC_START,	0x00 },
-	{ S1DREG_CRT_VRTC_PWIDTH,	0x83 },
-	{ S1DREG_TV_OUT_CTL,		0x10 },
-	{ S1DREG_CRT_DISP_MODE,		0x05 },
-	{ S1DREG_CRT_DISP_START0,	0x00 },
-	{ S1DREG_CRT_DISP_START1,	0x00 },
-	{ S1DREG_CRT_DISP_START2,	0x00 },
-	{ S1DREG_CRT_MEM_OFF0,		0x20 },
-	{ S1DREG_CRT_MEM_OFF1,		0x03 },
-	{ S1DREG_CRT_PIX_PAN,		0x00 },
-	{ S1DREG_CRT_DISP_FIFO_HTC,	0x00 },
-	{ S1DREG_CRT_DISP_FIFO_LTC,	0x00 },
-	{ S1DREG_LCD_CUR_CTL,		0x00 },
-	{ S1DREG_LCD_CUR_START,		0x01 },
-	{ S1DREG_LCD_CUR_XPOS0,		0x00 },
-	{ S1DREG_LCD_CUR_XPOS1,		0x00 },
-	{ S1DREG_LCD_CUR_YPOS0,		0x00 },
-	{ S1DREG_LCD_CUR_YPOS1,		0x00 },
-	{ S1DREG_LCD_CUR_BCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_GCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_RCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_BCTL1,		0x1f },
-	{ S1DREG_LCD_CUR_GCTL1,		0x3f },
-	{ S1DREG_LCD_CUR_RCTL1,		0x1f },
-	{ S1DREG_LCD_CUR_FIFO_HTC,	0x00 },
-	{ S1DREG_CRT_CUR_CTL,		0x00 },
-	{ S1DREG_CRT_CUR_START,		0x01 },
-	{ S1DREG_CRT_CUR_XPOS0,		0x00 },
-	{ S1DREG_CRT_CUR_XPOS1,		0x00 },
-	{ S1DREG_CRT_CUR_YPOS0,		0x00 },
-	{ S1DREG_CRT_CUR_YPOS1,		0x00 },
-	{ S1DREG_CRT_CUR_BCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_GCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_RCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_BCTL1,		0x1f },
-	{ S1DREG_CRT_CUR_GCTL1,		0x3f },
-	{ S1DREG_CRT_CUR_RCTL1,		0x1f },
-	{ S1DREG_CRT_CUR_FIFO_HTC,	0x00 },
-	{ S1DREG_BBLT_CTL0,		0x00 },
-	{ S1DREG_BBLT_CTL1,		0x00 },
-	{ S1DREG_BBLT_CC_EXP,		0x00 },
-	{ S1DREG_BBLT_OP,		0x00 },
-	{ S1DREG_BBLT_SRC_START0,	0x00 },
-	{ S1DREG_BBLT_SRC_START1,	0x00 },
-	{ S1DREG_BBLT_SRC_START2,	0x00 },
-	{ S1DREG_BBLT_DST_START0,	0x00 },
-	{ S1DREG_BBLT_DST_START1,	0x00 },
-	{ S1DREG_BBLT_DST_START2,	0x00 },
-	{ S1DREG_BBLT_MEM_OFF0,		0x00 },
-	{ S1DREG_BBLT_MEM_OFF1,		0x00 },
-	{ S1DREG_BBLT_WIDTH0,		0x00 },
-	{ S1DREG_BBLT_WIDTH1,		0x00 },
-	{ S1DREG_BBLT_HEIGHT0,		0x00 },
-	{ S1DREG_BBLT_HEIGHT1,		0x00 },
-	{ S1DREG_BBLT_BGC0,		0x00 },
-	{ S1DREG_BBLT_BGC1,		0x00 },
-	{ S1DREG_BBLT_FGC0,		0x00 },
-	{ S1DREG_BBLT_FGC1,		0x00 },
-	{ S1DREG_LKUP_MODE,		0x00 },
-	{ S1DREG_LKUP_ADDR,		0x00 },
-	{ S1DREG_PS_CNF,		0x10 },
-	{ S1DREG_PS_STATUS,		0x00 },
-	{ S1DREG_CPU2MEM_WDOGT,		0x00 },
-	{ S1DREG_COM_DISP_MODE,		0x02 },
-};
-
-static struct s1d13xxxfb_pdata s1d13806_platform_data = {
-	.initregs	= s1d13806_initregs,
-	.initregssize	= ARRAY_SIZE(s1d13806_initregs),
-};
-
-static struct resource s1d13806_resources[] = {
-	[0] = {
-		.start		= 0x07200000,
-		.end		= 0x07200000 + SZ_2M - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0x07000000,
-		.end		= 0x07000000 + SZ_2M - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device s1d13806_device = {
-	.name		= "s1d13806fb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s1d13806_resources),
-	.resource	= s1d13806_resources,
-
-	.dev = {
-		.platform_data	= &s1d13806_platform_data,
-	},
-};
-
-static struct platform_device *microdev_devices[] __initdata = {
-	&smc91x_device,
-	&s1d13806_device,
-};
-
-static int __init microdev_devices_setup(void)
-{
-	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
-}
-device_initcall(microdev_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh4202_microdev __initmv = {
-	.mv_name		= "SH4-202 MicroDev",
-	.mv_ioport_map		= microdev_ioport_map,
-	.mv_init_irq		= init_microdev_irq,
-};
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 6495f93540..787ddd3c62 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -300,7 +300,7 @@ static struct platform_device fsi_device = {
 	.resource	= fsi_resources,
 };
 
-static struct asoc_simple_card_info fsi_ak4642_info = {
+static struct simple_util_info fsi_ak4642_info = {
 	.name		= "AK4642",
 	.card		= "FSIA-AK4642",
 	.codec		= "ak4642-codec.0-0012",
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
deleted file mode 100644
index 39a83d832c..0000000000
--- a/arch/sh/configs/microdev_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH4_202=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH4202_MICRODEV=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
-CONFIG_SUPERHYWAY=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
index 56b0acace6..8bd10b904b 100644
--- a/arch/sh/drivers/Makefile
+++ b/arch/sh/drivers/Makefile
@@ -6,6 +6,5 @@
 obj-y		+= dma/ platform_early.o
 
 obj-$(CONFIG_PCI)		+= pci/
-obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
 obj-$(CONFIG_PUSH_SWITCH)	+= push-switch.o
 obj-$(CONFIG_HEARTBEAT)		+= heartbeat.o
diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
index 2fd2b77e12..ab9e791070 100644
--- a/arch/sh/drivers/pci/common.c
+++ b/arch/sh/drivers/pci/common.c
@@ -50,20 +50,21 @@ int __init pci_is_66mhz_capable(struct pci_channel *hose,
 				int top_bus, int current_bus)
 {
 	u32 pci_devfn;
-	unsigned short vid;
+	u16 vid;
 	int cap66 = -1;
 	u16 stat;
+	int ret;
 
 	pr_info("PCI: Checking 66MHz capabilities...\n");
 
 	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
 		if (PCI_FUNC(pci_devfn))
 			continue;
-		if (early_read_config_word(hose, top_bus, current_bus,
-					   pci_devfn, PCI_VENDOR_ID, &vid) !=
-		    PCIBIOS_SUCCESSFUL)
+		ret = early_read_config_word(hose, top_bus, current_bus,
+					     pci_devfn, PCI_VENDOR_ID, &vid);
+		if (ret != PCIBIOS_SUCCESSFUL)
 			continue;
-		if (vid == 0xffff)
+		if (PCI_POSSIBLE_ERROR(vid))
 			continue;
 
 		/* check 66MHz capability */
diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile
deleted file mode 100644
index aa6e3267c0..0000000000
--- a/arch/sh/drivers/superhyway/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperHyway specific kernel interface routines under Linux.
-#
-
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= ops-sh4-202.o
-
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
deleted file mode 100644
index 490142274e..0000000000
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/superhyway/ops-sh4-202.c
- *
- * SuperHyway bus support for SH4-202
- *
- * Copyright (C) 2005  Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/superhyway.h>
-#include <linux/string.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define PHYS_EMI_CBLOCK		P4SEGADDR(0x1ec00000)
-#define PHYS_EMI_DBLOCK		P4SEGADDR(0x08000000)
-#define PHYS_FEMI_CBLOCK	P4SEGADDR(0x1f800000)
-#define PHYS_FEMI_DBLOCK	P4SEGADDR(0x00000000)
-
-#define PHYS_EPBR_BLOCK		P4SEGADDR(0x1de00000)
-#define PHYS_DMAC_BLOCK		P4SEGADDR(0x1fa00000)
-#define PHYS_PBR_BLOCK		P4SEGADDR(0x1fc00000)
-
-static struct resource emi_resources[] = {
-	[0] = {
-		.start	= PHYS_EMI_CBLOCK,
-		.end	= PHYS_EMI_CBLOCK + 0x00300000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PHYS_EMI_DBLOCK,
-		.end	= PHYS_EMI_DBLOCK + 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct superhyway_device emi_device = {
-	.name		= "emi",
-	.num_resources	= ARRAY_SIZE(emi_resources),
-	.resource	= emi_resources,
-};
-
-static struct resource femi_resources[] = {
-	[0] = {
-		.start	= PHYS_FEMI_CBLOCK,
-		.end	= PHYS_FEMI_CBLOCK + 0x00100000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PHYS_FEMI_DBLOCK,
-		.end	= PHYS_FEMI_DBLOCK + 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct superhyway_device femi_device = {
-	.name		= "femi",
-	.num_resources	= ARRAY_SIZE(femi_resources),
-	.resource	= femi_resources,
-};
-
-static struct resource epbr_resources[] = {
-	[0] = {
-		.start	= P4SEGADDR(0x1e7ffff8),
-		.end	= P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PHYS_EPBR_BLOCK,
-		.end	= PHYS_EPBR_BLOCK + 0x00a00000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct superhyway_device epbr_device = {
-	.name		= "epbr",
-	.num_resources	= ARRAY_SIZE(epbr_resources),
-	.resource	= epbr_resources,
-};
-
-static struct resource dmac_resource = {
-	.start	= PHYS_DMAC_BLOCK,
-	.end	= PHYS_DMAC_BLOCK + 0x00100000 - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct superhyway_device dmac_device = {
-	.name		= "dmac",
-	.num_resources	= 1,
-	.resource	= &dmac_resource,
-};
-
-static struct resource pbr_resources[] = {
-	[0] = {
-		.start	= P4SEGADDR(0x1ffffff8),
-		.end	= P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PHYS_PBR_BLOCK,
-		.end	= PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct superhyway_device pbr_device = {
-	.name		= "pbr",
-	.num_resources	= ARRAY_SIZE(pbr_resources),
-	.resource	= pbr_resources,
-};
-
-static struct superhyway_device *sh4202_devices[] __initdata = {
-	&emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device,
-};
-
-static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
-{
-	u32 vcrh, vcrl;
-	u64 tmp;
-
-	/*
-	 * XXX: Even though the SH4-202 Evaluation Device documentation
-	 * indicates that VCRL is mapped first with VCRH at a + 0x04
-	 * offset, the opposite seems to be true.
-	 *
-	 * Some modules (PBR and ePBR for instance) also appear to have
-	 * VCRL/VCRH flipped in the documentation, but on the SH4-202
-	 * itself it appears that these are all consistently mapped with
-	 * VCRH preceding VCRL.
-	 *
-	 * Do not trust the documentation, for it is evil.
-	 */
-	vcrh = __raw_readl(base);
-	vcrl = __raw_readl(base + sizeof(u32));
-
-	tmp = ((u64)vcrh << 32) | vcrl;
-	memcpy(vcr, &tmp, sizeof(u64));
-
-	return 0;
-}
-
-static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
-{
-	u64 tmp = *(u64 *)&vcr;
-
-	__raw_writel((tmp >> 32) & 0xffffffff, base);
-	__raw_writel(tmp & 0xffffffff, base + sizeof(u32));
-
-	return 0;
-}
-
-static struct superhyway_ops sh4202_superhyway_ops = {
-	.read_vcr	= sh4202_read_vcr,
-	.write_vcr	= sh4202_write_vcr,
-};
-
-struct superhyway_bus superhyway_channels[] = {
-	{ &sh4202_superhyway_ops, },
-	{ 0, },
-};
-
-int __init superhyway_scan_bus(struct superhyway_bus *bus)
-{
-	return superhyway_add_devices(bus, sh4202_devices,
-				      ARRAY_SIZE(sh4202_devices));
-}
-
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 878b6b551b..51112f5455 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -90,6 +90,7 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 	unsigned long len);
 
 #define flush_cache_vmap(start, end)		local_flush_cache_all(NULL)
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		local_flush_cache_all(NULL)
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
diff --git a/arch/sh/include/asm/cmpxchg.h b/arch/sh/include/asm/cmpxchg.h
index 288f6f38d9..5d617b3ef7 100644
--- a/arch/sh/include/asm/cmpxchg.h
+++ b/arch/sh/include/asm/cmpxchg.h
@@ -71,4 +71,13 @@ static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
 				    (unsigned long)_n_, sizeof(*(ptr))); \
   })
 
+#include <asm-generic/cmpxchg-local.h>
+
+#define arch_cmpxchg_local(ptr, o, n) ({				\
+	(__typeof__(*ptr))__generic_cmpxchg_local((ptr),		\
+						  (unsigned long)(o),	\
+						  (unsigned long)(n),	\
+						  sizeof(*(ptr)));	\
+})
+
 #endif /* __ASM_SH_CMPXCHG_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index f2f38e9d48..ac521f287f 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -181,7 +181,7 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
 {									\
 	volatile type *__addr;						\
 									\
-	__addr = __ioport_map(port, sizeof(type));			\
+	__addr = (void __iomem *)sh_io_port_base + port;		\
 	*__addr = val;							\
 	slow;								\
 }									\
@@ -191,7 +191,7 @@ static inline type pfx##in##bwlq##p(unsigned long port)			\
 	volatile type *__addr;						\
 	type __val;							\
 									\
-	__addr = __ioport_map(port, sizeof(type));			\
+	__addr = (void __iomem *)sh_io_port_base + port;		\
 	__val = *__addr;						\
 	slow;								\
 									\
diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h
index 927d80ba23..7663171467 100644
--- a/arch/sh/include/asm/kexec.h
+++ b/arch/sh/include/asm/kexec.h
@@ -28,7 +28,7 @@
 /* The native architecture */
 #define KEXEC_ARCH KEXEC_ARCH_SH
 
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC_CORE
 /* arch/sh/kernel/machine_kexec.c */
 void reserve_crashkernel(void);
 
@@ -67,6 +67,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 }
 #else
 static inline void reserve_crashkernel(void) { }
-#endif /* CONFIG_KEXEC */
+#endif /* CONFIG_KEXEC_CORE */
 
 #endif /* __ASM_SH_KEXEC_H */
diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h
index eeba83e0a7..65d4c3316a 100644
--- a/arch/sh/include/asm/kprobes.h
+++ b/arch/sh/include/asm/kprobes.h
@@ -46,8 +46,6 @@ struct kprobe_ctlblk {
 };
 
 extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-				    unsigned long val, void *data);
 extern int kprobe_handle_illslot(unsigned long pc);
 #else
 
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index 2b4b085e8f..4e5314b921 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -19,11 +19,6 @@ struct sh_machine_vector {
 	int (*mv_irq_demux)(int irq);
 	void (*mv_init_irq)(void);
 
-#ifdef CONFIG_HAS_IOPORT_MAP
-	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
-	void (*mv_ioport_unmap)(void __iomem *);
-#endif
-
 	int (*mv_clk_init)(void);
 	int (*mv_mode_pins)(void);
 
diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h
deleted file mode 100644
index 0e2f9ab119..0000000000
--- a/arch/sh/include/mach-common/mach/microdev.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * linux/include/asm-sh/microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * Definitions for the SuperH SH4-202 MicroDev board.
- */
-#ifndef __ASM_SH_MICRODEV_H
-#define __ASM_SH_MICRODEV_H
-
-extern void init_microdev_irq(void);
-extern void microdev_print_fpga_intc_status(void);
-
-/*
- * The following are useful macros for manipulating the interrupt
- * controller (INTC) on the CPU-board FPGA.  should be noted that there
- * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
- * these are two different things, both of which need to be prorammed to
- * correctly route - unfortunately, they have the same name and
- * abbreviations!
- */
-#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
-#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
-#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
-
-
-/*
- * The following are the IRQ numbers for the Linux Kernel for external
- * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
- */
-#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
-#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
-#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
-#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
-#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
-#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
-#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
-#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
-
-/*
- * The following are the IRQ numbers for the INTC on the FPGA for
- * external interrupts.  i.e. the bits in the INTC registers in the
- * FPGA.
- */
-#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
-#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
-#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
-#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
-#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
-#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
-#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
-#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
-
-#define MICRODEV_IRQ_PCI_INTA		 8
-#define MICRODEV_IRQ_PCI_INTB		 9
-#define MICRODEV_IRQ_PCI_INTC		10
-#define MICRODEV_IRQ_PCI_INTD		11
-
-#define __IO_PREFIX microdev
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 69cd9ac4b2..2d7e70537d 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -33,7 +33,7 @@ obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_32.o module.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC_CORE)	+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 00c16331e0..02e3ee16e1 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -23,15 +23,11 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7091)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7760)	+= setup-sh7760.o
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= setup-sh4-202.o
 
 # Primary on-chip clocks (common)
 ifndef CONFIG_CPU_SH4A
 clock-$(CONFIG_CPU_SH4)			:= clock-sh4.o
 endif
 
-# Additional clocks by subtype
-clock-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= clock-sh4-202.o
-
 obj-y					+= $(clock-y)
 obj-$(CONFIG_PERF_EVENTS)		+= $(perf-y)
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
deleted file mode 100644
index c1cdef763c..0000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
- *
- * Additional SH4-202 support for the clock framework
- *
- *  Copyright (C) 2005  Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-#define CPG2_FRQCR3	0xfe0a0018
-
-static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
-static int frqcr3_values[]   = { 0, 1, 2, 3, 4, 5, 6  };
-
-static unsigned long emi_clk_recalc(struct clk *clk)
-{
-	int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
-	return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
-{
-	int divisor = clk->parent->rate / rate;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
-		if (frqcr3_divisors[i] == divisor)
-			return frqcr3_values[i];
-
-	/* Safe fallback */
-	return 5;
-}
-
-static struct sh_clk_ops sh4202_emi_clk_ops = {
-	.recalc		= emi_clk_recalc,
-};
-
-static struct clk sh4202_emi_clk = {
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh4202_emi_clk_ops,
-};
-
-static unsigned long femi_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
-	return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static struct sh_clk_ops sh4202_femi_clk_ops = {
-	.recalc		= femi_clk_recalc,
-};
-
-static struct clk sh4202_femi_clk = {
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh4202_femi_clk_ops,
-};
-
-static void shoc_clk_init(struct clk *clk)
-{
-	int i;
-
-	/*
-	 * For some reason, the shoc_clk seems to be set to some really
-	 * insane value at boot (values outside of the allowable frequency
-	 * range for instance). We deal with this by scaling it back down
-	 * to something sensible just in case.
-	 *
-	 * Start scaling from the high end down until we find something
-	 * that passes rate verification..
-	 */
-	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
-		int divisor = frqcr3_divisors[i];
-
-		if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
-			break;
-	}
-
-	WARN_ON(i == ARRAY_SIZE(frqcr3_divisors));	/* Undefined clock */
-}
-
-static unsigned long shoc_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
-	return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
-{
-	struct clk *bclk = clk_get(NULL, "bus_clk");
-	unsigned long bclk_rate = clk_get_rate(bclk);
-
-	clk_put(bclk);
-
-	if (rate > bclk_rate)
-		return 1;
-	if (rate > 66000000)
-		return 1;
-
-	return 0;
-}
-
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long frqcr3;
-	unsigned int tmp;
-
-	/* Make sure we have something sensible to switch to */
-	if (shoc_clk_verify_rate(clk, rate) != 0)
-		return -EINVAL;
-
-	tmp = frqcr3_lookup(clk, rate);
-
-	frqcr3 = __raw_readl(CPG2_FRQCR3);
-	frqcr3 &= ~(0x0007 << 6);
-	frqcr3 |= tmp << 6;
-	__raw_writel(frqcr3, CPG2_FRQCR3);
-
-	clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
-
-	return 0;
-}
-
-static struct sh_clk_ops sh4202_shoc_clk_ops = {
-	.init		= shoc_clk_init,
-	.recalc		= shoc_clk_recalc,
-	.set_rate	= shoc_clk_set_rate,
-};
-
-static struct clk sh4202_shoc_clk = {
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh4202_shoc_clk_ops,
-};
-
-static struct clk *sh4202_onchip_clocks[] = {
-	&sh4202_emi_clk,
-	&sh4202_femi_clk,
-	&sh4202_shoc_clk,
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),
-	CLKDEV_CON_ID("femi_clk", &sh4202_femi_clk),
-	CLKDEV_CON_ID("shoc_clk", &sh4202_shoc_clk),
-};
-
-int __init arch_clk_init(void)
-{
-	struct clk *clk;
-	int i, ret = 0;
-
-	cpg_clk_init();
-
-	clk = clk_get(NULL, "master_clk");
-	for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
-		struct clk *clkp = sh4202_onchip_clocks[i];
-
-		clkp->parent = clk;
-		ret |= clk_register(clkp);
-	}
-
-	clk_put(clk);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
deleted file mode 100644
index e6737f3d0d..0000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH4-202 Setup
- *
- *  Copyright (C) 2006  Paul Mundt
- *  Copyright (C) 2009  Magnus Damm
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
-	.scscr		= SCSCR_REIE,
-	.type		= PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
-	DEFINE_RES_MEM(0xffe80000, 0x100),
-	DEFINE_RES_IRQ(evt2irq(0x700)),
-	DEFINE_RES_IRQ(evt2irq(0x720)),
-	DEFINE_RES_IRQ(evt2irq(0x760)),
-	DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.resource	= scif0_resources,
-	.num_resources	= ARRAY_SIZE(scif0_resources),
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xffd80000, 0x30),
-	DEFINE_RES_IRQ(evt2irq(0x400)),
-	DEFINE_RES_IRQ(evt2irq(0x420)),
-	DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh4202_devices[] __initdata = {
-	&scif0_device,
-	&tmu0_device,
-};
-
-static int __init sh4202_devices_setup(void)
-{
-	return platform_add_devices(sh4202_devices,
-				    ARRAY_SIZE(sh4202_devices));
-}
-arch_initcall(sh4202_devices_setup);
-
-static struct platform_device *sh4202_early_devices[] __initdata = {
-	&scif0_device,
-	&tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
-	sh_early_platform_add_devices(sh4202_early_devices,
-				   ARRAY_SIZE(sh4202_early_devices));
-}
-
-enum {
-	UNUSED = 0,
-
-	/* interrupt sources */
-	IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
-	HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
-};
-
-static struct intc_vect vectors[] __initdata = {
-	INTC_VECT(HUDI, 0x600),
-	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
-	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
-	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
-	INTC_VECT(RTC, 0x4c0),
-	INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
-	INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
-	INTC_VECT(WDT, 0x560),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
-	{ 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
-	{ 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
-	{ 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
-	{ 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
-			 NULL, prio_registers, NULL);
-
-static struct intc_vect vectors_irlm[] __initdata = {
-	INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
-	INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
-			 NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
-	register_intc_controller(&intc_desc);
-}
-
-#define INTC_ICR	0xffd00000UL
-#define INTC_ICR_IRLM   (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
-	switch (mode) {
-	case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
-		__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
-		register_intc_controller(&intc_desc_irlm);
-		break;
-	default:
-		BUG();
-	}
-}
diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
index f39446a658..c8aff8a201 100644
--- a/arch/sh/kernel/ioport.c
+++ b/arch/sh/kernel/ioport.c
@@ -12,15 +12,6 @@
 unsigned long sh_io_port_base __read_mostly = -1;
 EXPORT_SYMBOL(sh_io_port_base);
 
-void __iomem *__ioport_map(unsigned long addr, unsigned int size)
-{
-	if (sh_mv.mv_ioport_map)
-		return sh_mv.mv_ioport_map(addr, size);
-
-	return (void __iomem *)(addr + sh_io_port_base);
-}
-EXPORT_SYMBOL(__ioport_map);
-
 void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
 	void __iomem *ret;
@@ -29,13 +20,11 @@ void __iomem *ioport_map(unsigned long port, unsigned int nr)
 	if (ret)
 		return ret;
 
-	return __ioport_map(port, nr);
+	return (void __iomem *)(port + sh_io_port_base);
 }
 EXPORT_SYMBOL(ioport_map);
 
 void ioport_unmap(void __iomem *addr)
 {
-	if (sh_mv.mv_ioport_unmap)
-		sh_mv.mv_ioport_unmap(addr);
 }
 EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 223c14f44a..fa3a7b3619 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -154,7 +154,7 @@ void __init reserve_crashkernel(void)
 	int ret;
 
 	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
-			&crash_size, &crash_base);
+			&crash_size, &crash_base, NULL, NULL);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
 		crashk_res.end = crash_base + crash_size - 1;
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
index e8eeedc9b1..1de006b1c3 100644
--- a/arch/sh/kernel/reboot.c
+++ b/arch/sh/kernel/reboot.c
@@ -63,7 +63,7 @@ struct machine_ops machine_ops = {
 	.shutdown	= native_machine_shutdown,
 	.restart	= native_machine_restart,
 	.halt		= native_machine_halt,
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC_CORE
 	.crash_shutdown = native_machine_crash_shutdown,
 #endif
 };
@@ -88,7 +88,7 @@ void machine_halt(void)
 	machine_ops.halt();
 }
 
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC_CORE
 void machine_crash_shutdown(struct pt_regs *regs)
 {
 	machine_ops.crash_shutdown(regs);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index b3da2757fa..d3175f09b3 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -7,7 +7,6 @@
  *  Copyright (C) 1999  Niibe Yutaka
  *  Copyright (C) 2002 - 2010 Paul Mundt
  */
-#include <linux/screen_info.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/initrd.h>
@@ -69,10 +68,6 @@ EXPORT_SYMBOL(cpu_data);
 struct sh_machine_vector sh_mv = { .mv_name = "generic", };
 EXPORT_SYMBOL(sh_mv);
 
-#ifdef CONFIG_VT
-struct screen_info screen_info;
-#endif
-
 extern int root_mountflags;
 
 #define RAMDISK_IMAGE_START_MASK	0x07FF
@@ -225,7 +220,7 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	request_resource(res, &code_resource);
 	request_resource(res, &data_resource);
 	request_resource(res, &bss_resource);
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC_CORE
 	request_resource(res, &crashk_res);
 #endif
 
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index e90d585c4d..363fae0fe9 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -260,7 +260,7 @@
 250	common	fadvise64			sys_fadvise64
 # 251 is unused
 252	common	exit_group			sys_exit_group
-253	common	lookup_dcookie			sys_lookup_dcookie
+253	common	lookup_dcookie			sys_ni_syscall
 254	common	epoll_create			sys_epoll_create
 255	common	epoll_ctl			sys_epoll_ctl
 256	common	epoll_wait			sys_epoll_wait
@@ -455,3 +455,7 @@
 450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
 451	common	cachestat			sys_cachestat
 452	common	fchmodat2			sys_fchmodat2
+453	common	map_shadow_stack		sys_map_shadow_stack
+454	common	futex_wake			sys_futex_wake
+455	common	futex_wait			sys_futex_wait
+456	common	futex_requeue			sys_futex_requeue