Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 102 insertions, 0 deletions

diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
new file mode 100644
index 0000000000..6fe76282ac
--- /dev/null
+++ b/arch/x86/include/asm/olpc.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* OLPC machine specific definitions */
+
+#ifndef _ASM_X86_OLPC_H
+#define _ASM_X86_OLPC_H
+
+#include <asm/geode.h>
+
+struct olpc_platform_t {
+	int flags;
+	uint32_t boardrev;
+};
+
+#define OLPC_F_PRESENT		0x01
+#define OLPC_F_DCON		0x02
+
+#ifdef CONFIG_OLPC
+
+extern struct olpc_platform_t olpc_platform_info;
+
+/*
+ * OLPC board IDs contain the major build number within the mask 0x0ff0,
+ * and the minor build number within 0x000f.  Pre-builds have a minor
+ * number less than 8, and normal builds start at 8.  For example, 0x0B10
+ * is a PreB1, and 0x0C18 is a C1.
+ */
+
+static inline uint32_t olpc_board(uint8_t id)
+{
+	return (id << 4) | 0x8;
+}
+
+static inline uint32_t olpc_board_pre(uint8_t id)
+{
+	return id << 4;
+}
+
+static inline int machine_is_olpc(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
+}
+
+/*
+ * The DCON is OLPC's Display Controller.  It has a number of unique
+ * features that we might want to take advantage of..
+ */
+static inline int olpc_has_dcon(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
+}
+
+/*
+ * The "Mass Production" version of OLPC's XO is identified as being model
+ * C2.  During the prototype phase, the following models (in chronological
+ * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
+ * were based on Geode GX CPUs, and models after that were based upon
+ * Geode LX CPUs.  There were also some hand-assembled models floating
+ * around, referred to as PreB1, PreB2, etc.
+ */
+static inline int olpc_board_at_least(uint32_t rev)
+{
+	return olpc_platform_info.boardrev >= rev;
+}
+
+#else
+
+static inline int machine_is_olpc(void)
+{
+	return 0;
+}
+
+static inline int olpc_has_dcon(void)
+{
+	return 0;
+}
+
+#endif
+
+#ifdef CONFIG_OLPC_XO1_PM
+extern void do_olpc_suspend_lowlevel(void);
+extern void olpc_xo1_pm_wakeup_set(u16 value);
+extern void olpc_xo1_pm_wakeup_clear(u16 value);
+#endif
+
+extern int pci_olpc_init(void);
+
+/* GPIO assignments */
+
+#define OLPC_GPIO_MIC_AC	1
+#define OLPC_GPIO_DCON_STAT0	5
+#define OLPC_GPIO_DCON_STAT1	6
+#define OLPC_GPIO_DCON_IRQ	7
+#define OLPC_GPIO_THRM_ALRM	geode_gpio(10)
+#define OLPC_GPIO_DCON_LOAD    11
+#define OLPC_GPIO_DCON_BLANK   12
+#define OLPC_GPIO_SMB_CLK      14
+#define OLPC_GPIO_SMB_DATA     15
+#define OLPC_GPIO_WORKAUX	geode_gpio(24)
+#define OLPC_GPIO_LID		26
+#define OLPC_GPIO_ECSCI		27
+
+#endif /* _ASM_X86_OLPC_H */