summaryrefslogtreecommitdiffstats
path: root/block/blk-pm.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /block/blk-pm.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'block/blk-pm.c')
-rw-r--r--block/blk-pm.c214
1 files changed, 214 insertions, 0 deletions
diff --git a/block/blk-pm.c b/block/blk-pm.c
new file mode 100644
index 0000000000..6b72b2e03f
--- /dev/null
+++ b/block/blk-pm.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/blk-pm.h>
+#include <linux/blkdev.h>
+#include <linux/pm_runtime.h>
+#include "blk-mq.h"
+
+/**
+ * blk_pm_runtime_init - Block layer runtime PM initialization routine
+ * @q: the queue of the device
+ * @dev: the device the queue belongs to
+ *
+ * Description:
+ * Initialize runtime-PM-related fields for @q and start auto suspend for
+ * @dev. Drivers that want to take advantage of request-based runtime PM
+ * should call this function after @dev has been initialized, and its
+ * request queue @q has been allocated, and runtime PM for it can not happen
+ * yet(either due to disabled/forbidden or its usage_count > 0). In most
+ * cases, driver should call this function before any I/O has taken place.
+ *
+ * This function takes care of setting up using auto suspend for the device,
+ * the autosuspend delay is set to -1 to make runtime suspend impossible
+ * until an updated value is either set by user or by driver. Drivers do
+ * not need to touch other autosuspend settings.
+ *
+ * The block layer runtime PM is request based, so only works for drivers
+ * that use request as their IO unit instead of those directly use bio's.
+ */
+void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
+{
+ q->dev = dev;
+ q->rpm_status = RPM_ACTIVE;
+ pm_runtime_set_autosuspend_delay(q->dev, -1);
+ pm_runtime_use_autosuspend(q->dev);
+}
+EXPORT_SYMBOL(blk_pm_runtime_init);
+
+/**
+ * blk_pre_runtime_suspend - Pre runtime suspend check
+ * @q: the queue of the device
+ *
+ * Description:
+ * This function will check if runtime suspend is allowed for the device
+ * by examining if there are any requests pending in the queue. If there
+ * are requests pending, the device can not be runtime suspended; otherwise,
+ * the queue's status will be updated to SUSPENDING and the driver can
+ * proceed to suspend the device.
+ *
+ * For the not allowed case, we mark last busy for the device so that
+ * runtime PM core will try to autosuspend it some time later.
+ *
+ * This function should be called near the start of the device's
+ * runtime_suspend callback.
+ *
+ * Return:
+ * 0 - OK to runtime suspend the device
+ * -EBUSY - Device should not be runtime suspended
+ */
+int blk_pre_runtime_suspend(struct request_queue *q)
+{
+ int ret = 0;
+
+ if (!q->dev)
+ return ret;
+
+ WARN_ON_ONCE(q->rpm_status != RPM_ACTIVE);
+
+ spin_lock_irq(&q->queue_lock);
+ q->rpm_status = RPM_SUSPENDING;
+ spin_unlock_irq(&q->queue_lock);
+
+ /*
+ * Increase the pm_only counter before checking whether any
+ * non-PM blk_queue_enter() calls are in progress to avoid that any
+ * new non-PM blk_queue_enter() calls succeed before the pm_only
+ * counter is decreased again.
+ */
+ blk_set_pm_only(q);
+ ret = -EBUSY;
+ /* Switch q_usage_counter from per-cpu to atomic mode. */
+ blk_freeze_queue_start(q);
+ /*
+ * Wait until atomic mode has been reached. Since that
+ * involves calling call_rcu(), it is guaranteed that later
+ * blk_queue_enter() calls see the pm-only state. See also
+ * http://lwn.net/Articles/573497/.
+ */
+ percpu_ref_switch_to_atomic_sync(&q->q_usage_counter);
+ if (percpu_ref_is_zero(&q->q_usage_counter))
+ ret = 0;
+ /* Switch q_usage_counter back to per-cpu mode. */
+ blk_mq_unfreeze_queue(q);
+
+ if (ret < 0) {
+ spin_lock_irq(&q->queue_lock);
+ q->rpm_status = RPM_ACTIVE;
+ pm_runtime_mark_last_busy(q->dev);
+ spin_unlock_irq(&q->queue_lock);
+
+ blk_clear_pm_only(q);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(blk_pre_runtime_suspend);
+
+/**
+ * blk_post_runtime_suspend - Post runtime suspend processing
+ * @q: the queue of the device
+ * @err: return value of the device's runtime_suspend function
+ *
+ * Description:
+ * Update the queue's runtime status according to the return value of the
+ * device's runtime suspend function and mark last busy for the device so
+ * that PM core will try to auto suspend the device at a later time.
+ *
+ * This function should be called near the end of the device's
+ * runtime_suspend callback.
+ */
+void blk_post_runtime_suspend(struct request_queue *q, int err)
+{
+ if (!q->dev)
+ return;
+
+ spin_lock_irq(&q->queue_lock);
+ if (!err) {
+ q->rpm_status = RPM_SUSPENDED;
+ } else {
+ q->rpm_status = RPM_ACTIVE;
+ pm_runtime_mark_last_busy(q->dev);
+ }
+ spin_unlock_irq(&q->queue_lock);
+
+ if (err)
+ blk_clear_pm_only(q);
+}
+EXPORT_SYMBOL(blk_post_runtime_suspend);
+
+/**
+ * blk_pre_runtime_resume - Pre runtime resume processing
+ * @q: the queue of the device
+ *
+ * Description:
+ * Update the queue's runtime status to RESUMING in preparation for the
+ * runtime resume of the device.
+ *
+ * This function should be called near the start of the device's
+ * runtime_resume callback.
+ */
+void blk_pre_runtime_resume(struct request_queue *q)
+{
+ if (!q->dev)
+ return;
+
+ spin_lock_irq(&q->queue_lock);
+ q->rpm_status = RPM_RESUMING;
+ spin_unlock_irq(&q->queue_lock);
+}
+EXPORT_SYMBOL(blk_pre_runtime_resume);
+
+/**
+ * blk_post_runtime_resume - Post runtime resume processing
+ * @q: the queue of the device
+ *
+ * Description:
+ * For historical reasons, this routine merely calls blk_set_runtime_active()
+ * to do the real work of restarting the queue. It does this regardless of
+ * whether the device's runtime-resume succeeded; even if it failed the
+ * driver or error handler will need to communicate with the device.
+ *
+ * This function should be called near the end of the device's
+ * runtime_resume callback.
+ */
+void blk_post_runtime_resume(struct request_queue *q)
+{
+ blk_set_runtime_active(q);
+}
+EXPORT_SYMBOL(blk_post_runtime_resume);
+
+/**
+ * blk_set_runtime_active - Force runtime status of the queue to be active
+ * @q: the queue of the device
+ *
+ * If the device is left runtime suspended during system suspend the resume
+ * hook typically resumes the device and corrects runtime status
+ * accordingly. However, that does not affect the queue runtime PM status
+ * which is still "suspended". This prevents processing requests from the
+ * queue.
+ *
+ * This function can be used in driver's resume hook to correct queue
+ * runtime PM status and re-enable peeking requests from the queue. It
+ * should be called before first request is added to the queue.
+ *
+ * This function is also called by blk_post_runtime_resume() for
+ * runtime resumes. It does everything necessary to restart the queue.
+ */
+void blk_set_runtime_active(struct request_queue *q)
+{
+ int old_status;
+
+ if (!q->dev)
+ return;
+
+ spin_lock_irq(&q->queue_lock);
+ old_status = q->rpm_status;
+ q->rpm_status = RPM_ACTIVE;
+ pm_runtime_mark_last_busy(q->dev);
+ pm_request_autosuspend(q->dev);
+ spin_unlock_irq(&q->queue_lock);
+
+ if (old_status != RPM_ACTIVE)
+ blk_clear_pm_only(q);
+}
+EXPORT_SYMBOL(blk_set_runtime_active);