summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/acpica/hwxface.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/acpi/acpica/hwxface.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/acpi/acpica/hwxface.c')
-rw-r--r--drivers/acpi/acpica/hwxface.c448
1 files changed, 448 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
new file mode 100644
index 0000000000..c31f803995
--- /dev/null
+++ b/drivers/acpi/acpica/hwxface.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: hwxface - Public ACPICA hardware interfaces
+ *
+ * Copyright (C) 2000 - 2023, Intel Corp.
+ *
+ *****************************************************************************/
+
+#define EXPORT_ACPI_INTERFACES
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_HARDWARE
+ACPI_MODULE_NAME("hwxface")
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_reset
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Set reset register in memory or IO space. Note: Does not
+ * support reset register in PCI config space, this must be
+ * handled separately.
+ *
+ ******************************************************************************/
+acpi_status acpi_reset(void)
+{
+ struct acpi_generic_address *reset_reg;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_reset);
+
+ reset_reg = &acpi_gbl_FADT.reset_register;
+
+ /* Check if the reset register is supported */
+
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+ !reset_reg->address) {
+ return_ACPI_STATUS(AE_NOT_EXIST);
+ }
+
+ if (reset_reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+ /*
+ * For I/O space, write directly to the OSL. This bypasses the port
+ * validation mechanism, which may block a valid write to the reset
+ * register.
+ *
+ * NOTE:
+ * The ACPI spec requires the reset register width to be 8, so we
+ * hardcode it here and ignore the FADT value. This maintains
+ * compatibility with other ACPI implementations that have allowed
+ * BIOS code with bad register width values to go unnoticed.
+ */
+ status = acpi_os_write_port((acpi_io_address)reset_reg->address,
+ acpi_gbl_FADT.reset_value,
+ ACPI_RESET_REGISTER_WIDTH);
+ } else {
+ /* Write the reset value to the reset register */
+
+ status = acpi_hw_write(acpi_gbl_FADT.reset_value, reset_reg);
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_reset)
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_read
+ *
+ * PARAMETERS: value - Where the value is returned
+ * reg - GAS register structure
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Read from either memory or IO space.
+ *
+ * LIMITATIONS: <These limitations also apply to acpi_write>
+ * bit_width must be exactly 8, 16, 32, or 64.
+ * space_ID must be system_memory or system_IO.
+ * bit_offset and access_width are currently ignored, as there has
+ * not been a need to implement these.
+ *
+ ******************************************************************************/
+acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_NAME(acpi_read);
+
+ status = acpi_hw_read(return_value, reg);
+ return (status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_read)
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_write
+ *
+ * PARAMETERS: value - Value to be written
+ * reg - GAS register structure
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Write to either memory or IO space.
+ *
+ ******************************************************************************/
+acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_NAME(acpi_write);
+
+ status = acpi_hw_write(value, reg);
+ return (status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_write)
+
+#if (!ACPI_REDUCED_HARDWARE)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_read_bit_register
+ *
+ * PARAMETERS: register_id - ID of ACPI Bit Register to access
+ * return_value - Value that was read from the register,
+ * normalized to bit position zero.
+ *
+ * RETURN: Status and the value read from the specified Register. Value
+ * returned is normalized to bit0 (is shifted all the way right)
+ *
+ * DESCRIPTION: ACPI bit_register read function. Does not acquire the HW lock.
+ *
+ * SUPPORTS: Bit fields in PM1 Status, PM1 Enable, PM1 Control, and
+ * PM2 Control.
+ *
+ * Note: The hardware lock is not required when reading the ACPI bit registers
+ * since almost all of them are single bit and it does not matter that
+ * the parent hardware register can be split across two physical
+ * registers. The only multi-bit field is SLP_TYP in the PM1 control
+ * register, but this field does not cross an 8-bit boundary (nor does
+ * it make much sense to actually read this field.)
+ *
+ ******************************************************************************/
+acpi_status acpi_read_bit_register(u32 register_id, u32 *return_value)
+{
+ struct acpi_bit_register_info *bit_reg_info;
+ u32 register_value;
+ u32 value;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE_U32(acpi_read_bit_register, register_id);
+
+ /* Get the info structure corresponding to the requested ACPI Register */
+
+ bit_reg_info = acpi_hw_get_bit_register_info(register_id);
+ if (!bit_reg_info) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Read the entire parent register */
+
+ status = acpi_hw_register_read(bit_reg_info->parent_register,
+ &register_value);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Normalize the value that was read, mask off other bits */
+
+ value = ((register_value & bit_reg_info->access_bit_mask)
+ >> bit_reg_info->bit_position);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "BitReg %X, ParentReg %X, Actual %8.8X, ReturnValue %8.8X\n",
+ register_id, bit_reg_info->parent_register,
+ register_value, value));
+
+ *return_value = value;
+ return_ACPI_STATUS(AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_read_bit_register)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_write_bit_register
+ *
+ * PARAMETERS: register_id - ID of ACPI Bit Register to access
+ * value - Value to write to the register, in bit
+ * position zero. The bit is automatically
+ * shifted to the correct position.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: ACPI Bit Register write function. Acquires the hardware lock
+ * since most operations require a read/modify/write sequence.
+ *
+ * SUPPORTS: Bit fields in PM1 Status, PM1 Enable, PM1 Control, and
+ * PM2 Control.
+ *
+ * Note that at this level, the fact that there may be actually two
+ * hardware registers (A and B - and B may not exist) is abstracted.
+ *
+ ******************************************************************************/
+acpi_status acpi_write_bit_register(u32 register_id, u32 value)
+{
+ struct acpi_bit_register_info *bit_reg_info;
+ acpi_cpu_flags lock_flags;
+ u32 register_value;
+ acpi_status status = AE_OK;
+
+ ACPI_FUNCTION_TRACE_U32(acpi_write_bit_register, register_id);
+
+ /* Get the info structure corresponding to the requested ACPI Register */
+
+ bit_reg_info = acpi_hw_get_bit_register_info(register_id);
+ if (!bit_reg_info) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ lock_flags = acpi_os_acquire_raw_lock(acpi_gbl_hardware_lock);
+
+ /*
+ * At this point, we know that the parent register is one of the
+ * following: PM1 Status, PM1 Enable, PM1 Control, or PM2 Control
+ */
+ if (bit_reg_info->parent_register != ACPI_REGISTER_PM1_STATUS) {
+ /*
+ * 1) Case for PM1 Enable, PM1 Control, and PM2 Control
+ *
+ * Perform a register read to preserve the bits that we are not
+ * interested in
+ */
+ status = acpi_hw_register_read(bit_reg_info->parent_register,
+ &register_value);
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+
+ /*
+ * Insert the input bit into the value that was just read
+ * and write the register
+ */
+ ACPI_REGISTER_INSERT_VALUE(register_value,
+ bit_reg_info->bit_position,
+ bit_reg_info->access_bit_mask,
+ value);
+
+ status = acpi_hw_register_write(bit_reg_info->parent_register,
+ register_value);
+ } else {
+ /*
+ * 2) Case for PM1 Status
+ *
+ * The Status register is different from the rest. Clear an event
+ * by writing 1, writing 0 has no effect. So, the only relevant
+ * information is the single bit we're interested in, all others
+ * should be written as 0 so they will be left unchanged.
+ */
+ register_value = ACPI_REGISTER_PREPARE_BITS(value,
+ bit_reg_info->
+ bit_position,
+ bit_reg_info->
+ access_bit_mask);
+
+ /* No need to write the register if value is all zeros */
+
+ if (register_value) {
+ status =
+ acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,
+ register_value);
+ }
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "BitReg %X, ParentReg %X, Value %8.8X, Actual %8.8X\n",
+ register_id, bit_reg_info->parent_register, value,
+ register_value));
+
+unlock_and_exit:
+
+ acpi_os_release_raw_lock(acpi_gbl_hardware_lock, lock_flags);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_write_bit_register)
+#endif /* !ACPI_REDUCED_HARDWARE */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_get_sleep_type_data
+ *
+ * PARAMETERS: sleep_state - Numeric sleep state
+ * *sleep_type_a - Where SLP_TYPa is returned
+ * *sleep_type_b - Where SLP_TYPb is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested
+ * sleep state via the appropriate \_Sx object.
+ *
+ * The sleep state package returned from the corresponding \_Sx_ object
+ * must contain at least one integer.
+ *
+ * March 2005:
+ * Added support for a package that contains two integers. This
+ * goes against the ACPI specification which defines this object as a
+ * package with one encoded DWORD integer. However, existing practice
+ * by many BIOS vendors is to return a package with 2 or more integer
+ * elements, at least one per sleep type (A/B).
+ *
+ * January 2013:
+ * Therefore, we must be prepared to accept a package with either a
+ * single integer or multiple integers.
+ *
+ * The single integer DWORD format is as follows:
+ * BYTE 0 - Value for the PM1A SLP_TYP register
+ * BYTE 1 - Value for the PM1B SLP_TYP register
+ * BYTE 2-3 - Reserved
+ *
+ * The dual integer format is as follows:
+ * Integer 0 - Value for the PM1A SLP_TYP register
+ * Integer 1 - Value for the PM1A SLP_TYP register
+ *
+ ******************************************************************************/
+acpi_status
+acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b)
+{
+ acpi_status status;
+ struct acpi_evaluate_info *info;
+ union acpi_operand_object **elements;
+
+ ACPI_FUNCTION_TRACE(acpi_get_sleep_type_data);
+
+ /* Validate parameters */
+
+ if ((sleep_state > ACPI_S_STATES_MAX) || !sleep_type_a || !sleep_type_b) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Allocate the evaluation information block */
+
+ info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
+ if (!info) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ /*
+ * Evaluate the \_Sx namespace object containing the register values
+ * for this state
+ */
+ info->relative_pathname = acpi_gbl_sleep_state_names[sleep_state];
+
+ status = acpi_ns_evaluate(info);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_NOT_FOUND) {
+
+ /* The _Sx states are optional, ignore NOT_FOUND */
+
+ goto final_cleanup;
+ }
+
+ goto warning_cleanup;
+ }
+
+ /* Must have a return object */
+
+ if (!info->return_object) {
+ ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
+ info->relative_pathname));
+ status = AE_AML_NO_RETURN_VALUE;
+ goto warning_cleanup;
+ }
+
+ /* Return object must be of type Package */
+
+ if (info->return_object->common.type != ACPI_TYPE_PACKAGE) {
+ ACPI_ERROR((AE_INFO,
+ "Sleep State return object is not a Package"));
+ status = AE_AML_OPERAND_TYPE;
+ goto return_value_cleanup;
+ }
+
+ /*
+ * Any warnings about the package length or the object types have
+ * already been issued by the predefined name module -- there is no
+ * need to repeat them here.
+ */
+ elements = info->return_object->package.elements;
+ switch (info->return_object->package.count) {
+ case 0:
+
+ status = AE_AML_PACKAGE_LIMIT;
+ break;
+
+ case 1:
+
+ if (elements[0]->common.type != ACPI_TYPE_INTEGER) {
+ status = AE_AML_OPERAND_TYPE;
+ break;
+ }
+
+ /* A valid _Sx_ package with one integer */
+
+ *sleep_type_a = (u8)elements[0]->integer.value;
+ *sleep_type_b = (u8)(elements[0]->integer.value >> 8);
+ break;
+
+ case 2:
+ default:
+
+ if ((elements[0]->common.type != ACPI_TYPE_INTEGER) ||
+ (elements[1]->common.type != ACPI_TYPE_INTEGER)) {
+ status = AE_AML_OPERAND_TYPE;
+ break;
+ }
+
+ /* A valid _Sx_ package with two integers */
+
+ *sleep_type_a = (u8)elements[0]->integer.value;
+ *sleep_type_b = (u8)elements[1]->integer.value;
+ break;
+ }
+
+return_value_cleanup:
+ acpi_ut_remove_reference(info->return_object);
+
+warning_cleanup:
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While evaluating Sleep State [%s]",
+ info->relative_pathname));
+ }
+
+final_cleanup:
+ ACPI_FREE(info);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_get_sleep_type_data)