summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_sl82c105.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/ata/pata_sl82c105.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/ata/pata_sl82c105.c')
-rw-r--r--drivers/ata/pata_sl82c105.c380
1 files changed, 380 insertions, 0 deletions
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
new file mode 100644
index 0000000000..93882e976e
--- /dev/null
+++ b/drivers/ata/pata_sl82c105.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata_sl82c105.c - SL82C105 PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * (C) 2011 Bartlomiej Zolnierkiewicz
+ *
+ * Based in part on linux/drivers/ide/pci/sl82c105.c
+ * SL82C105/Winbond 553 IDE driver
+ *
+ * and in part on the documentation and errata sheet
+ *
+ *
+ * Note: The controller like many controllers has shared timings for
+ * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back
+ * in the dma_stop function. Thus we actually don't need a set_dmamode
+ * method as the PIO method is always called and will set the right PIO
+ * timing parameters.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_sl82c105"
+#define DRV_VERSION "0.3.3"
+
+enum {
+ /*
+ * SL82C105 PCI config register 0x40 bits.
+ */
+ CTRL_IDE_IRQB = (1 << 30),
+ CTRL_IDE_IRQA = (1 << 28),
+ CTRL_LEGIRQ = (1 << 11),
+ CTRL_P1F16 = (1 << 5),
+ CTRL_P1EN = (1 << 4),
+ CTRL_P0F16 = (1 << 1),
+ CTRL_P0EN = (1 << 0)
+};
+
+/**
+ * sl82c105_pre_reset - probe begin
+ * @link: ATA link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Set up cable type and use generic probe init
+ */
+
+static int sl82c105_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ static const struct pci_bits sl82c105_enable_bits[] = {
+ { 0x40, 1, 0x01, 0x01 },
+ { 0x40, 1, 0x10, 0x10 }
+ };
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
+ return -ENOENT;
+ return ata_sff_prereset(link, deadline);
+}
+
+
+/**
+ * sl82c105_configure_piomode - set chip PIO timing
+ * @ap: ATA interface
+ * @adev: ATA device
+ * @pio: PIO mode
+ *
+ * Called to do the PIO mode setup. Our timing registers are shared
+ * so a configure_dmamode call will undo any work we do here and vice
+ * versa
+ */
+
+static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ static u16 pio_timing[5] = {
+ 0x50D, 0x407, 0x304, 0x242, 0x240
+ };
+ u16 dummy;
+ int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno);
+
+ pci_write_config_word(pdev, timing, pio_timing[pio]);
+ /* Can we lose this oddity of the old driver */
+ pci_read_config_word(pdev, timing, &dummy);
+}
+
+/**
+ * sl82c105_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the PIO mode setup. Our timing registers are shared
+ * but we want to set the PIO timing by default.
+ */
+
+static void sl82c105_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ sl82c105_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
+}
+
+/**
+ * sl82c105_configure_dmamode - set DMA mode in chip
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Load DMA cycle times into the chip ready for a DMA transfer
+ * to occur.
+ */
+
+static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ static u16 dma_timing[3] = {
+ 0x707, 0x201, 0x200
+ };
+ u16 dummy;
+ int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno);
+ int dma = adev->dma_mode - XFER_MW_DMA_0;
+
+ pci_write_config_word(pdev, timing, dma_timing[dma]);
+ /* Can we lose this oddity of the old driver */
+ pci_read_config_word(pdev, timing, &dummy);
+}
+
+/**
+ * sl82c105_reset_engine - Reset the DMA engine
+ * @ap: ATA interface
+ *
+ * The sl82c105 has some serious problems with the DMA engine
+ * when transfers don't run as expected or ATAPI is used. The
+ * recommended fix is to reset the engine each use using a chip
+ * test register.
+ */
+
+static void sl82c105_reset_engine(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u16 val;
+
+ pci_read_config_word(pdev, 0x7E, &val);
+ pci_write_config_word(pdev, 0x7E, val | 4);
+ pci_write_config_word(pdev, 0x7E, val & ~4);
+}
+
+/**
+ * sl82c105_bmdma_start - DMA engine begin
+ * @qc: ATA command
+ *
+ * Reset the DMA engine each use as recommended by the errata
+ * document.
+ *
+ * FIXME: if we switch clock at BMDMA start/end we might get better
+ * PIO performance on DMA capable devices.
+ */
+
+static void sl82c105_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ udelay(100);
+ sl82c105_reset_engine(ap);
+ udelay(100);
+
+ /* Set the clocks for DMA */
+ sl82c105_configure_dmamode(ap, qc->dev);
+ /* Activate DMA */
+ ata_bmdma_start(qc);
+}
+
+/**
+ * sl82c105_bmdma_stop - DMA engine stop
+ * @qc: ATA command
+ *
+ * Reset the DMA engine each use as recommended by the errata
+ * document.
+ *
+ * This function is also called to turn off DMA when a timeout occurs
+ * during DMA operation. In both cases we need to reset the engine.
+ *
+ * We assume bmdma_stop is always called if bmdma_start as called. If
+ * not then we may need to wrap qc_issue.
+ */
+
+static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ ata_bmdma_stop(qc);
+ sl82c105_reset_engine(ap);
+ udelay(100);
+
+ /* This will redo the initial setup of the DMA device to matching
+ PIO timings */
+ sl82c105_set_piomode(ap, qc->dev);
+}
+
+/**
+ * sl82c105_qc_defer - implement serialization
+ * @qc: command
+ *
+ * We must issue one command per host not per channel because
+ * of the reset bug.
+ *
+ * Q: is the scsi host lock sufficient ?
+ */
+
+static int sl82c105_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_host *host = qc->ap->host;
+ struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
+ int rc;
+
+ /* First apply the usual rules */
+ rc = ata_std_qc_defer(qc);
+ if (rc != 0)
+ return rc;
+
+ /* Now apply serialization rules. Only allow a command if the
+ other channel state machine is idle */
+ if (alt && alt->qc_active)
+ return ATA_DEFER_PORT;
+ return 0;
+}
+
+static bool sl82c105_sff_irq_check(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 val, mask = ap->port_no ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
+
+ pci_read_config_dword(pdev, 0x40, &val);
+
+ return val & mask;
+}
+
+static const struct scsi_host_template sl82c105_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations sl82c105_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .qc_defer = sl82c105_qc_defer,
+ .bmdma_start = sl82c105_bmdma_start,
+ .bmdma_stop = sl82c105_bmdma_stop,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = sl82c105_set_piomode,
+ .prereset = sl82c105_pre_reset,
+ .sff_irq_check = sl82c105_sff_irq_check,
+};
+
+/**
+ * sl82c105_bridge_revision - find bridge version
+ * @pdev: PCI device for the ATA function
+ *
+ * Locates the PCI bridge associated with the ATA function and
+ * providing it is a Winbond 553 reports the revision. If it cannot
+ * find a revision or the right device it returns -1
+ */
+
+static int sl82c105_bridge_revision(struct pci_dev *pdev)
+{
+ struct pci_dev *bridge;
+
+ /*
+ * The bridge should be part of the same device, but function 0.
+ */
+ bridge = pci_get_slot(pdev->bus,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
+ if (!bridge)
+ return -1;
+
+ /*
+ * Make sure it is a Winbond 553 and is an ISA bridge.
+ */
+ if (bridge->vendor != PCI_VENDOR_ID_WINBOND ||
+ bridge->device != PCI_DEVICE_ID_WINBOND_83C553 ||
+ bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) {
+ pci_dev_put(bridge);
+ return -1;
+ }
+ /*
+ * We need to find function 0's revision, not function 1
+ */
+ pci_dev_put(bridge);
+ return bridge->revision;
+}
+
+static void sl82c105_fixup(struct pci_dev *pdev)
+{
+ u32 val;
+
+ pci_read_config_dword(pdev, 0x40, &val);
+ val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
+ pci_write_config_dword(pdev, 0x40, val);
+}
+
+static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ static const struct ata_port_info info_dma = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .port_ops = &sl82c105_port_ops
+ };
+ static const struct ata_port_info info_early = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .port_ops = &sl82c105_port_ops
+ };
+ /* for now use only the first port */
+ const struct ata_port_info *ppi[] = { &info_early,
+ NULL };
+ int rev;
+ int rc;
+
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
+
+ rev = sl82c105_bridge_revision(dev);
+
+ if (rev == -1)
+ dev_warn(&dev->dev,
+ "pata_sl82c105: Unable to find bridge, disabling DMA\n");
+ else if (rev <= 5)
+ dev_warn(&dev->dev,
+ "pata_sl82c105: Early bridge revision, no DMA available\n");
+ else
+ ppi[0] = &info_dma;
+
+ sl82c105_fixup(dev);
+
+ return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sl82c105_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = pci_get_drvdata(pdev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ sl82c105_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
+static const struct pci_device_id sl82c105[] = {
+ { PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), },
+
+ { },
+};
+
+static struct pci_driver sl82c105_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sl82c105,
+ .probe = sl82c105_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = sl82c105_reinit_one,
+#endif
+};
+
+module_pci_driver(sl82c105_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Sl82c105");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sl82c105);
+MODULE_VERSION(DRV_VERSION);