Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 322 insertions, 257 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 928ec93c6b..b595494ab9 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -556,7 +556,7 @@ comment "PATA SFF controllers with BMDMA"
 
 config PATA_ALI
 	tristate "ALi PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for the ALi ATA interfaces
@@ -566,7 +566,7 @@ config PATA_ALI
 
 config PATA_AMD
 	tristate "AMD/NVidia PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for the AMD and NVidia PATA
@@ -584,7 +584,7 @@ config PATA_ARASAN_CF
 
 config PATA_ARTOP
 	tristate "ARTOP 6210/6260 PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for ARTOP PATA controllers.
 
@@ -611,7 +611,7 @@ config PATA_ATP867X
 
 config PATA_CMD64X
 	tristate "CMD64x PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for the CMD64x series chips
@@ -658,7 +658,7 @@ config PATA_CS5536
 
 config PATA_CYPRESS
 	tristate "Cypress CY82C693 PATA support (Very Experimental)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for the Cypress/Contaq CY82C693
@@ -706,7 +706,7 @@ config PATA_HPT366
 
 config PATA_HPT37X
 	tristate "HPT 370/370A/371/372/374/302 PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the majority of the later HPT
 	  PATA controllers via the new ATA layer.
@@ -715,7 +715,7 @@ config PATA_HPT37X
 
 config PATA_HPT3X2N
 	tristate "HPT 371N/372N/302N PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the N variant HPT PATA
 	  controllers via the new ATA layer.
@@ -818,7 +818,7 @@ config PATA_MPC52xx
 
 config PATA_NETCELL
 	tristate "NETCELL Revolution RAID support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the Netcell Revolution RAID
 	  PATA controller.
@@ -854,7 +854,7 @@ config PATA_OLDPIIX
 
 config PATA_OPTIDMA
 	tristate "OPTI FireStar PATA support (Very Experimental)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables DMA/PIO support for the later OPTi
 	  controllers found on some old motherboards and in some
@@ -864,7 +864,7 @@ config PATA_OPTIDMA
 
 config PATA_PDC2027X
 	tristate "Promise PATA 2027x support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 
@@ -872,7 +872,7 @@ config PATA_PDC2027X
 
 config PATA_PDC_OLD
 	tristate "Older Promise PATA controller support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the Promise 20246, 20262, 20263,
 	  20265 and 20267 adapters.
@@ -900,7 +900,7 @@ config PATA_RDC
 
 config PATA_SC1200
 	tristate "SC1200 PATA support"
-	depends on PCI && (X86_32 || COMPILE_TEST)
+	depends on PCI && (X86_32 || COMPILE_TEST) && HAS_IOPORT
 	help
 	  This option enables support for the NatSemi/AMD SC1200 SoC
 	  companion chip used with the Geode processor family.
@@ -918,7 +918,7 @@ config PATA_SCH
 
 config PATA_SERVERWORKS
 	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 	  HT1000 PATA controllers, via the new ATA layer.
@@ -1182,7 +1182,7 @@ config ATA_GENERIC
 
 config PATA_LEGACY
 	tristate "Legacy ISA PATA support (Experimental)"
-	depends on (ISA || PCI)
+	depends on (ISA || PCI) && HAS_IOPORT
 	select PATA_TIMINGS
 	help
 	  This option enables support for ISA/VLB/PCI bus legacy PATA
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 344c87210d..8f40f75ba0 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -397,7 +397,7 @@ extern const struct attribute_group *ahci_sdev_groups[];
 	.sdev_groups		= ahci_sdev_groups,			\
 	.change_queue_depth     = ata_scsi_change_queue_depth,		\
 	.tag_alloc_policy       = BLK_TAG_ALLOC_RR,             	\
-	.slave_configure        = ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 
 extern struct ata_port_operations ahci_ops;
 extern struct ata_port_operations ahci_platform_ops;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d937e6e5cc..74b59b78d2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1480,19 +1480,19 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_exec_internal_sg - execute libata internal command
+ *	ata_exec_internal - execute libata internal command
  *	@dev: Device to which the command is sent
  *	@tf: Taskfile registers for the command and the result
  *	@cdb: CDB for packet command
  *	@dma_dir: Data transfer direction of the command
- *	@sgl: sg list for the data buffer of the command
- *	@n_elem: Number of sg entries
+ *	@buf: Data buffer of the command
+ *	@buflen: Length of data buffer
  *	@timeout: Timeout in msecs (0 for default)
  *
- *	Executes libata internal command with timeout.  @tf contains
- *	command on entry and result on return.  Timeout and error
- *	conditions are reported via return value.  No recovery action
- *	is taken after a command times out.  It's caller's duty to
+ *	Executes libata internal command with timeout. @tf contains
+ *	the command on entry and the result on return. Timeout and error
+ *	conditions are reported via the return value. No recovery action
+ *	is taken after a command times out. It is the caller's duty to
  *	clean up after timeout.
  *
  *	LOCKING:
@@ -1501,34 +1501,38 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
  *	RETURNS:
  *	Zero on success, AC_ERR_* mask on failure
  */
-static unsigned ata_exec_internal_sg(struct ata_device *dev,
-				     struct ata_taskfile *tf, const u8 *cdb,
-				     int dma_dir, struct scatterlist *sgl,
-				     unsigned int n_elem, unsigned int timeout)
+unsigned int ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf,
+			       const u8 *cdb, enum dma_data_direction dma_dir,
+			       void *buf, unsigned int buflen,
+			       unsigned int timeout)
 {
 	struct ata_link *link = dev->link;
 	struct ata_port *ap = link->ap;
 	u8 command = tf->command;
-	int auto_timeout = 0;
 	struct ata_queued_cmd *qc;
+	struct scatterlist sgl;
 	unsigned int preempted_tag;
 	u32 preempted_sactive;
 	u64 preempted_qc_active;
 	int preempted_nr_active_links;
+	bool auto_timeout = false;
 	DECLARE_COMPLETION_ONSTACK(wait);
 	unsigned long flags;
 	unsigned int err_mask;
 	int rc;
 
+	if (WARN_ON(dma_dir != DMA_NONE && !buf))
+		return AC_ERR_INVALID;
+
 	spin_lock_irqsave(ap->lock, flags);
 
-	/* no internal command while frozen */
+	/* No internal command while frozen */
 	if (ata_port_is_frozen(ap)) {
 		spin_unlock_irqrestore(ap->lock, flags);
 		return AC_ERR_SYSTEM;
 	}
 
-	/* initialize internal qc */
+	/* Initialize internal qc */
 	qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
 
 	qc->tag = ATA_TAG_INTERNAL;
@@ -1547,12 +1551,12 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	ap->qc_active = 0;
 	ap->nr_active_links = 0;
 
-	/* prepare & issue qc */
+	/* Prepare and issue qc */
 	qc->tf = *tf;
 	if (cdb)
 		memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
 
-	/* some SATA bridges need us to indicate data xfer direction */
+	/* Some SATA bridges need us to indicate data xfer direction */
 	if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) &&
 	    dma_dir == DMA_FROM_DEVICE)
 		qc->tf.feature |= ATAPI_DMADIR;
@@ -1560,13 +1564,8 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	qc->flags |= ATA_QCFLAG_RESULT_TF;
 	qc->dma_dir = dma_dir;
 	if (dma_dir != DMA_NONE) {
-		unsigned int i, buflen = 0;
-		struct scatterlist *sg;
-
-		for_each_sg(sgl, sg, n_elem, i)
-			buflen += sg->length;
-
-		ata_sg_init(qc, sgl, n_elem);
+		sg_init_one(&sgl, buf, buflen);
+		ata_sg_init(qc, &sgl, 1);
 		qc->nbytes = buflen;
 	}
 
@@ -1578,11 +1577,11 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	if (!timeout) {
-		if (ata_probe_timeout)
+		if (ata_probe_timeout) {
 			timeout = ata_probe_timeout * 1000;
-		else {
+		} else {
 			timeout = ata_internal_cmd_timeout(dev, command);
-			auto_timeout = 1;
+			auto_timeout = true;
 		}
 	}
 
@@ -1595,30 +1594,25 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 	ata_sff_flush_pio_task(ap);
 
 	if (!rc) {
-		spin_lock_irqsave(ap->lock, flags);
-
-		/* We're racing with irq here.  If we lose, the
-		 * following test prevents us from completing the qc
-		 * twice.  If we win, the port is frozen and will be
-		 * cleaned up by ->post_internal_cmd().
+		/*
+		 * We are racing with irq here. If we lose, the following test
+		 * prevents us from completing the qc twice. If we win, the port
+		 * is frozen and will be cleaned up by ->post_internal_cmd().
 		 */
+		spin_lock_irqsave(ap->lock, flags);
 		if (qc->flags & ATA_QCFLAG_ACTIVE) {
 			qc->err_mask |= AC_ERR_TIMEOUT;
-
 			ata_port_freeze(ap);
-
 			ata_dev_warn(dev, "qc timeout after %u msecs (cmd 0x%x)\n",
 				     timeout, command);
 		}
-
 		spin_unlock_irqrestore(ap->lock, flags);
 	}
 
-	/* do post_internal_cmd */
 	if (ap->ops->post_internal_cmd)
 		ap->ops->post_internal_cmd(qc);
 
-	/* perform minimal error analysis */
+	/* Perform minimal error analysis */
 	if (qc->flags & ATA_QCFLAG_EH) {
 		if (qc->result_tf.status & (ATA_ERR | ATA_DF))
 			qc->err_mask |= AC_ERR_DEV;
@@ -1632,7 +1626,7 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 		qc->result_tf.status |= ATA_SENSE;
 	}
 
-	/* finish up */
+	/* Finish up */
 	spin_lock_irqsave(ap->lock, flags);
 
 	*tf = qc->result_tf;
@@ -1653,44 +1647,6 @@ static unsigned ata_exec_internal_sg(struct ata_device *dev,
 }
 
 /**
- *	ata_exec_internal - execute libata internal command
- *	@dev: Device to which the command is sent
- *	@tf: Taskfile registers for the command and the result
- *	@cdb: CDB for packet command
- *	@dma_dir: Data transfer direction of the command
- *	@buf: Data buffer of the command
- *	@buflen: Length of data buffer
- *	@timeout: Timeout in msecs (0 for default)
- *
- *	Wrapper around ata_exec_internal_sg() which takes simple
- *	buffer instead of sg list.
- *
- *	LOCKING:
- *	None.  Should be called with kernel context, might sleep.
- *
- *	RETURNS:
- *	Zero on success, AC_ERR_* mask on failure
- */
-unsigned ata_exec_internal(struct ata_device *dev,
-			   struct ata_taskfile *tf, const u8 *cdb,
-			   int dma_dir, void *buf, unsigned int buflen,
-			   unsigned int timeout)
-{
-	struct scatterlist *psg = NULL, sg;
-	unsigned int n_elem = 0;
-
-	if (dma_dir != DMA_NONE) {
-		WARN_ON(!buf);
-		sg_init_one(&sg, buf, buflen);
-		psg = &sg;
-		n_elem++;
-	}
-
-	return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem,
-				    timeout);
-}
-
-/**
  *	ata_pio_need_iordy	-	check if iordy needed
  *	@adev: ATA device
  *
@@ -4199,12 +4155,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 						ATA_HORKAGE_ZERO_AFTER_TRIM |
 						ATA_HORKAGE_NOLPM },
 
-	/* Apacer models with LPM issues */
-	{ "Apacer AS340*",		NULL,	ATA_HORKAGE_NOLPM },
-
 	/* AMD Radeon devices with broken LPM support */
 	{ "R3SL240G",			NULL,	ATA_HORKAGE_NOLPM },
 
+	/* Apacer models with LPM issues */
+	{ "Apacer AS340*",		NULL,	ATA_HORKAGE_NOLPM },
+
 	/* These specific Samsung models/firmware-revs do not handle LPM well */
 	{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM },
 	{ "SAMSUNG SSD PM830 mSATA *",  "CXM13D1Q", ATA_HORKAGE_NOLPM },
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 0fb1934875..9e047bf912 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -848,80 +848,143 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
 	    ata_scsi_lpm_show, ata_scsi_lpm_store);
 EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
 
-static ssize_t ata_ncq_prio_supported_show(struct device *device,
-					   struct device_attribute *attr,
-					   char *buf)
+/**
+ *	ata_ncq_prio_supported - Check if device supports NCQ Priority
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@supported: Address of a boolean to store the result
+ *
+ *	Helper to check if device supports NCQ Priority feature.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @supported
+ *	* %-ENODEV	- Failed to find the ATA device
+ */
+int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev,
+			   bool *supported)
 {
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev;
-	bool ncq_prio_supported;
+	unsigned long flags;
 	int rc = 0;
 
-	spin_lock_irq(ap->lock);
+	spin_lock_irqsave(ap->lock, flags);
 	dev = ata_scsi_find_dev(ap, sdev);
 	if (!dev)
 		rc = -ENODEV;
 	else
-		ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
-	spin_unlock_irq(ap->lock);
+		*supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_supported);
+
+static ssize_t ata_ncq_prio_supported_show(struct device *device,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool supported;
+	int rc;
+
+	rc = ata_ncq_prio_supported(ap, sdev, &supported);
+	if (rc)
+		return rc;
 
-	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
+	return sysfs_emit(buf, "%d\n", supported);
 }
 
 DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
 EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
 
-static ssize_t ata_ncq_prio_enable_show(struct device *device,
-					struct device_attribute *attr,
-					char *buf)
+/**
+ *	ata_ncq_prio_enabled - Check if NCQ Priority is enabled
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@enabled: Address of a boolean to store the result
+ *
+ *	Helper to check if NCQ Priority feature is enabled.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @enabled
+ *	* %-ENODEV	- Failed to find the ATA device
+ */
+int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev,
+			 bool *enabled)
 {
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev;
-	bool ncq_prio_enable;
+	unsigned long flags;
 	int rc = 0;
 
-	spin_lock_irq(ap->lock);
+	spin_lock_irqsave(ap->lock, flags);
 	dev = ata_scsi_find_dev(ap, sdev);
 	if (!dev)
 		rc = -ENODEV;
 	else
-		ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
-	spin_unlock_irq(ap->lock);
+		*enabled = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
+	spin_unlock_irqrestore(ap->lock, flags);
 
-	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable);
+	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled);
 
-static ssize_t ata_ncq_prio_enable_store(struct device *device,
-					 struct device_attribute *attr,
-					 const char *buf, size_t len)
+static ssize_t ata_ncq_prio_enable_show(struct device *device,
+					struct device_attribute *attr,
+					char *buf)
 {
 	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap;
-	struct ata_device *dev;
-	long int input;
-	int rc = 0;
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool enabled;
+	int rc;
 
-	rc = kstrtol(buf, 10, &input);
+	rc = ata_ncq_prio_enabled(ap, sdev, &enabled);
 	if (rc)
 		return rc;
-	if ((input < 0) || (input > 1))
-		return -EINVAL;
 
-	ap = ata_shost_to_port(sdev->host);
-	dev = ata_scsi_find_dev(ap, sdev);
-	if (unlikely(!dev))
-		return  -ENODEV;
+	return sysfs_emit(buf, "%d\n", enabled);
+}
+
+/**
+ *	ata_ncq_prio_enable - Enable/disable NCQ Priority
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@enable: true - enable NCQ Priority, false - disable NCQ Priority
+ *
+ *	Helper to enable/disable NCQ Priority feature.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @enabled
+ *	* %-ENODEV	- Failed to find the ATA device
+ *	* %-EINVAL	- NCQ Priority is not supported or CDL is enabled
+ */
+int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev,
+			bool enable)
+{
+	struct ata_device *dev;
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(ap->lock, flags);
 
-	spin_lock_irq(ap->lock);
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev) {
+		rc = -ENODEV;
+		goto unlock;
+	}
 
 	if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
 		rc = -EINVAL;
 		goto unlock;
 	}
 
-	if (input) {
+	if (enable) {
 		if (dev->flags & ATA_DFLAG_CDL_ENABLED) {
 			ata_dev_err(dev,
 				"CDL must be disabled to enable NCQ priority\n");
@@ -934,9 +997,30 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,
 	}
 
 unlock:
-	spin_unlock_irq(ap->lock);
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enable);
+
+static ssize_t ata_ncq_prio_enable_store(struct device *device,
+					 struct device_attribute *attr,
+					 const char *buf, size_t len)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool enable;
+	int rc;
+
+	rc = kstrtobool(buf, &enable);
+	if (rc)
+		return rc;
+
+	rc = ata_ncq_prio_enable(ap, sdev, enable);
+	if (rc)
+		return rc;
 
-	return rc ? rc : len;
+	return len;
 }
 
 DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
@@ -1170,21 +1254,24 @@ void ata_sas_tport_delete(struct ata_port *ap)
 EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
 
 /**
- *	ata_sas_slave_configure - Default slave_config routine for libata devices
+ *	ata_sas_device_configure - Default device_configure routine for libata
+ *				   devices
  *	@sdev: SCSI device to configure
+ *	@lim: queue limits
  *	@ap: ATA port to which SCSI device is attached
  *
  *	RETURNS:
  *	Zero.
  */
 
-int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+int ata_sas_device_configure(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_port *ap)
 {
 	ata_scsi_sdev_config(sdev);
 
-	return ata_scsi_dev_config(sdev, ap->link.device);
+	return ata_scsi_dev_config(sdev, lim, ap->link.device);
 }
-EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+EXPORT_SYMBOL_GPL(ata_sas_device_configure);
 
 /**
  *	ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 9c3daa7d19..076fbeadce 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -230,6 +230,80 @@ void ata_scsi_set_sense_information(struct ata_device *dev,
 				   SCSI_SENSE_BUFFERSIZE, information);
 }
 
+/**
+ *	ata_scsi_set_passthru_sense_fields - Set ATA fields in sense buffer
+ *	@qc: ATA PASS-THROUGH command.
+ *
+ *	Populates "ATA Status Return sense data descriptor" / "Fixed format
+ *	sense data" with ATA taskfile fields.
+ *
+ *	LOCKING:
+ *	None.
+ */
+static void ata_scsi_set_passthru_sense_fields(struct ata_queued_cmd *qc)
+{
+	struct scsi_cmnd *cmd = qc->scsicmd;
+	struct ata_taskfile *tf = &qc->result_tf;
+	unsigned char *sb = cmd->sense_buffer;
+
+	if ((sb[0] & 0x7f) >= 0x72) {
+		unsigned char *desc;
+		u8 len;
+
+		/* descriptor format */
+		len = sb[7];
+		desc = (char *)scsi_sense_desc_find(sb, len + 8, 9);
+		if (!desc) {
+			if (SCSI_SENSE_BUFFERSIZE < len + 14)
+				return;
+			sb[7] = len + 14;
+			desc = sb + 8 + len;
+		}
+		desc[0] = 9;
+		desc[1] = 12;
+		/*
+		 * Copy registers into sense buffer.
+		 */
+		desc[2] = 0x00;
+		desc[3] = tf->error;
+		desc[5] = tf->nsect;
+		desc[7] = tf->lbal;
+		desc[9] = tf->lbam;
+		desc[11] = tf->lbah;
+		desc[12] = tf->device;
+		desc[13] = tf->status;
+
+		/*
+		 * Fill in Extend bit, and the high order bytes
+		 * if applicable.
+		 */
+		if (tf->flags & ATA_TFLAG_LBA48) {
+			desc[2] |= 0x01;
+			desc[4] = tf->hob_nsect;
+			desc[6] = tf->hob_lbal;
+			desc[8] = tf->hob_lbam;
+			desc[10] = tf->hob_lbah;
+		}
+	} else {
+		/* Fixed sense format */
+		sb[0] |= 0x80;
+		sb[3] = tf->error;
+		sb[4] = tf->status;
+		sb[5] = tf->device;
+		sb[6] = tf->nsect;
+		if (tf->flags & ATA_TFLAG_LBA48)  {
+			sb[8] |= 0x80;
+			if (tf->hob_nsect)
+				sb[8] |= 0x40;
+			if (tf->hob_lbal || tf->hob_lbam || tf->hob_lbah)
+				sb[8] |= 0x20;
+		}
+		sb[9] = tf->lbal;
+		sb[10] = tf->lbam;
+		sb[11] = tf->lbah;
+	}
+}
+
 static void ata_scsi_set_invalid_field(struct ata_device *dev,
 				       struct scsi_cmnd *cmd, u16 field, u8 bit)
 {
@@ -837,10 +911,8 @@ static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
  *	ata_gen_passthru_sense - Generate check condition sense block.
  *	@qc: Command that completed.
  *
- *	This function is specific to the ATA descriptor format sense
- *	block specified for the ATA pass through commands.  Regardless
- *	of whether the command errored or not, return a sense
- *	block. Copy all controller registers into the sense
+ *	This function is specific to the ATA pass through commands.
+ *	Regardless of whether the command errored or not, return a sense
  *	block. If there was no error, we get the request from an ATA
  *	passthrough command, so we use the following sense data:
  *	sk = RECOVERED ERROR
@@ -855,7 +927,6 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
 	struct scsi_cmnd *cmd = qc->scsicmd;
 	struct ata_taskfile *tf = &qc->result_tf;
 	unsigned char *sb = cmd->sense_buffer;
-	unsigned char *desc = sb + 8;
 	u8 sense_key, asc, ascq;
 
 	memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
@@ -870,67 +941,8 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
 				   &sense_key, &asc, &ascq);
 		ata_scsi_set_sense(qc->dev, cmd, sense_key, asc, ascq);
 	} else {
-		/*
-		 * ATA PASS-THROUGH INFORMATION AVAILABLE
-		 * Always in descriptor format sense.
-		 */
-		scsi_build_sense(cmd, 1, RECOVERED_ERROR, 0, 0x1D);
-	}
-
-	if ((cmd->sense_buffer[0] & 0x7f) >= 0x72) {
-		u8 len;
-
-		/* descriptor format */
-		len = sb[7];
-		desc = (char *)scsi_sense_desc_find(sb, len + 8, 9);
-		if (!desc) {
-			if (SCSI_SENSE_BUFFERSIZE < len + 14)
-				return;
-			sb[7] = len + 14;
-			desc = sb + 8 + len;
-		}
-		desc[0] = 9;
-		desc[1] = 12;
-		/*
-		 * Copy registers into sense buffer.
-		 */
-		desc[2] = 0x00;
-		desc[3] = tf->error;
-		desc[5] = tf->nsect;
-		desc[7] = tf->lbal;
-		desc[9] = tf->lbam;
-		desc[11] = tf->lbah;
-		desc[12] = tf->device;
-		desc[13] = tf->status;
-
-		/*
-		 * Fill in Extend bit, and the high order bytes
-		 * if applicable.
-		 */
-		if (tf->flags & ATA_TFLAG_LBA48) {
-			desc[2] |= 0x01;
-			desc[4] = tf->hob_nsect;
-			desc[6] = tf->hob_lbal;
-			desc[8] = tf->hob_lbam;
-			desc[10] = tf->hob_lbah;
-		}
-	} else {
-		/* Fixed sense format */
-		desc[0] = tf->error;
-		desc[1] = tf->status;
-		desc[2] = tf->device;
-		desc[3] = tf->nsect;
-		desc[7] = 0;
-		if (tf->flags & ATA_TFLAG_LBA48)  {
-			desc[8] |= 0x80;
-			if (tf->hob_nsect)
-				desc[8] |= 0x40;
-			if (tf->hob_lbal || tf->hob_lbam || tf->hob_lbah)
-				desc[8] |= 0x20;
-		}
-		desc[9] = tf->lbal;
-		desc[10] = tf->lbam;
-		desc[11] = tf->lbah;
+		/* ATA PASS-THROUGH INFORMATION AVAILABLE */
+		ata_scsi_set_sense(qc->dev, cmd, RECOVERED_ERROR, 0, 0x1D);
 	}
 }
 
@@ -1021,7 +1033,8 @@ bool ata_scsi_dma_need_drain(struct request *rq)
 }
 EXPORT_SYMBOL_GPL(ata_scsi_dma_need_drain);
 
-int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
+int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_device *dev)
 {
 	struct request_queue *q = sdev->request_queue;
 	int depth = 1;
@@ -1031,7 +1044,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 
 	/* configure max sectors */
 	dev->max_sectors = min(dev->max_sectors, sdev->host->max_sectors);
-	blk_queue_max_hw_sectors(q, dev->max_sectors);
+	lim->max_hw_sectors = dev->max_sectors;
 
 	if (dev->class == ATA_DEV_ATAPI) {
 		sdev->sector_size = ATA_SECT_SIZE;
@@ -1040,7 +1053,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 		blk_queue_update_dma_pad(q, ATA_DMA_PAD_SZ - 1);
 
 		/* make room for appending the drain */
-		blk_queue_max_segments(q, queue_max_segments(q) - 1);
+		lim->max_segments--;
 
 		sdev->dma_drain_len = ATAPI_MAX_DRAIN;
 		sdev->dma_drain_buf = kmalloc(sdev->dma_drain_len, GFP_NOIO);
@@ -1077,7 +1090,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 			"sector_size=%u > PAGE_SIZE, PIO may malfunction\n",
 			sdev->sector_size);
 
-	blk_queue_update_dma_alignment(q, sdev->sector_size - 1);
+	lim->dma_alignment = sdev->sector_size - 1;
 
 	if (dev->flags & ATA_DFLAG_AN)
 		set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
@@ -1131,8 +1144,9 @@ int ata_scsi_slave_alloc(struct scsi_device *sdev)
 EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
 
 /**
- *	ata_scsi_slave_config - Set SCSI device attributes
+ *	ata_scsi_device_configure - Set SCSI device attributes
  *	@sdev: SCSI device to examine
+ *	@lim: queue limits
  *
  *	This is called before we actually start reading
  *	and writing to the device, to configure certain
@@ -1142,17 +1156,18 @@ EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
  *	Defined by SCSI layer.  We don't really care.
  */
 
-int ata_scsi_slave_config(struct scsi_device *sdev)
+int ata_scsi_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
 
 	if (dev)
-		return ata_scsi_dev_config(sdev, dev);
+		return ata_scsi_dev_config(sdev, lim, dev);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
+EXPORT_SYMBOL_GPL(ata_scsi_device_configure);
 
 /**
  *	ata_scsi_slave_destroy - SCSI device is about to be destroyed
@@ -1629,26 +1644,32 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *cmd = qc->scsicmd;
 	u8 *cdb = cmd->cmnd;
-	int need_sense = (qc->err_mask != 0) &&
-		!(qc->flags & ATA_QCFLAG_SENSE_VALID);
+	bool have_sense = qc->flags & ATA_QCFLAG_SENSE_VALID;
+	bool is_ata_passthru = cdb[0] == ATA_16 || cdb[0] == ATA_12;
+	bool is_ck_cond_request = cdb[2] & 0x20;
+	bool is_error = qc->err_mask != 0;
 
 	/* For ATA pass thru (SAT) commands, generate a sense block if
 	 * user mandated it or if there's an error.  Note that if we
-	 * generate because the user forced us to [CK_COND =1], a check
+	 * generate because the user forced us to [CK_COND=1], a check
 	 * condition is generated and the ATA register values are returned
 	 * whether the command completed successfully or not. If there
-	 * was no error, we use the following sense data:
+	 * was no error, and CK_COND=1, we use the following sense data:
 	 * sk = RECOVERED ERROR
 	 * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE
 	 */
-	if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
-	    ((cdb[2] & 0x20) || need_sense))
-		ata_gen_passthru_sense(qc);
-	else if (need_sense)
+	if (is_ata_passthru && (is_ck_cond_request || is_error || have_sense)) {
+		if (!have_sense)
+			ata_gen_passthru_sense(qc);
+		ata_scsi_set_passthru_sense_fields(qc);
+		if (is_ck_cond_request)
+			set_status_byte(qc->scsicmd, SAM_STAT_CHECK_CONDITION);
+	} else if (is_error && !have_sense) {
 		ata_gen_ata_sense(qc);
-	else
+	} else {
 		/* Keep the SCSI ML and status byte, clear host byte. */
 		cmd->result &= 0x0000ffff;
+	}
 
 	ata_qc_done(qc);
 }
@@ -2587,14 +2608,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
 	/* handle completion from EH */
 	if (unlikely(err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID)) {
 
-		if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
-			/* FIXME: not quite right; we don't want the
-			 * translation of taskfile registers into a
-			 * sense descriptors, since that's only
-			 * correct for ATA, not ATAPI
-			 */
+		if (!(qc->flags & ATA_QCFLAG_SENSE_VALID))
 			ata_gen_passthru_sense(qc);
-		}
 
 		/* SCSI EH automatically locks door if sdev->locked is
 		 * set.  Sometimes door lock request continues to
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 95a19c4ef2..250f7dae05 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3032,6 +3032,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
  */
 int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
 {
+#ifdef CONFIG_HAS_IOPORT
 	unsigned long bmdma = pci_resource_start(pdev, 4);
 	u8 simplex;
 
@@ -3044,6 +3045,9 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
 	if (simplex & 0x80)
 		return -EOPNOTSUPP;
 	return 0;
+#else
+	return -ENOENT;
+#endif /* CONFIG_HAS_IOPORT */
 }
 EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
 
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 5c685bb193..38ce13b554 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -50,10 +50,10 @@ extern int ata_build_rw_tf(struct ata_queued_cmd *qc, u64 block, u32 n_block,
 			   unsigned int tf_flags, int dld, int class);
 extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
 			     struct ata_device *dev);
-extern unsigned ata_exec_internal(struct ata_device *dev,
-				  struct ata_taskfile *tf, const u8 *cdb,
-				  int dma_dir, void *buf, unsigned int buflen,
-				  unsigned int timeout);
+unsigned int ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf,
+			       const u8 *cdb, enum dma_data_direction dma_dir,
+			       void *buf, unsigned int buflen,
+			       unsigned int timeout);
 extern int ata_wait_ready(struct ata_link *link, unsigned long deadline,
 			  int (*check_ready)(struct ata_link *link));
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
@@ -131,7 +131,8 @@ extern void ata_scsi_dev_rescan(struct work_struct *work);
 extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 			      unsigned int id, u64 lun);
 void ata_scsi_sdev_config(struct scsi_device *sdev);
-int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev);
+int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_device *dev);
 int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev);
 
 /* libata-eh.c */
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 38795508c2..027cf67101 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -151,12 +151,6 @@ static int cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (!host)
 		return -ENOMEM;
 
-	/* Perform set up for DMA */
-	if (pci_enable_device_io(pdev)) {
-		dev_err(&pdev->dev, "unable to configure BAR2.\n");
-		return -ENODEV;
-	}
-
 	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) {
 		dev_err(&pdev->dev, "unable to configure DMA mask.\n");
 		return -ENODEV;
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 88b2e9817f..3cb455a32d 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -796,7 +796,8 @@ static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
 /* Hook the standard slave config to fixup some HW related alignment
  * restrictions
  */
-static int pata_macio_slave_config(struct scsi_device *sdev)
+static int pata_macio_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct pata_macio_priv *priv = ap->private_data;
@@ -805,7 +806,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 	int rc;
 
 	/* First call original */
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 	if (rc)
 		return rc;
 
@@ -814,7 +815,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 
 	/* OHare has issues with non cache aligned DMA on some chipsets */
 	if (priv->kind == controller_ohare) {
-		blk_queue_update_dma_alignment(sdev->request_queue, 31);
+		lim->dma_alignment = 31;
 		blk_queue_update_dma_pad(sdev->request_queue, 31);
 
 		/* Tell the world about it */
@@ -829,7 +830,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 	/* Shasta and K2 seem to have "issues" with reads ... */
 	if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
 		/* Allright these are bad, apply restrictions */
-		blk_queue_update_dma_alignment(sdev->request_queue, 15);
+		lim->dma_alignment = 15;
 		blk_queue_update_dma_pad(sdev->request_queue, 15);
 
 		/* We enable MWI and hack cache line size directly here, this
@@ -914,11 +915,14 @@ static const struct scsi_host_template pata_macio_sht = {
 	.sg_tablesize		= MAX_DCMDS,
 	/* We may not need that strict one */
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	/* Not sure what the real max is but we know it's less than 64K, let's
-	 * use 64K minus 256
+	/*
+	 * The SCSI core requires the segment size to cover at least a page, so
+	 * for 64K page size kernels this must be at least 64K. However the
+	 * hardware can't handle 64K, so pata_macio_qc_prep() will split large
+	 * requests.
 	 */
-	.max_segment_size	= MAX_DBDMA_SEG,
-	.slave_configure	= pata_macio_slave_config,
+	.max_segment_size	= SZ_64K,
+	.device_configure	= pata_macio_device_configure,
 	.sdev_groups		= ata_common_sdev_groups,
 	.can_queue		= ATA_DEF_QUEUE,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 9bec0aee92..05c905827d 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -673,7 +673,7 @@ static const struct scsi_host_template mv6_sht = {
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth	= ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
-	.slave_configure	= ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 };
 
 static struct ata_port_operations mv5_ops = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 0a0cee755b..36d99043ef 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -296,7 +296,8 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_adma_slave_config(struct scsi_device *sdev);
+static int nv_adma_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static enum ata_completion_errors nv_adma_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
@@ -318,7 +319,8 @@ static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static void nv_mcp55_thaw(struct ata_port *ap);
 static void nv_mcp55_freeze(struct ata_port *ap);
 static void nv_swncq_error_handler(struct ata_port *ap);
-static int nv_swncq_slave_config(struct scsi_device *sdev);
+static int nv_swncq_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim);
 static int nv_swncq_port_start(struct ata_port *ap);
 static enum ata_completion_errors nv_swncq_qc_prep(struct ata_queued_cmd *qc);
 static void nv_swncq_fill_sg(struct ata_queued_cmd *qc);
@@ -380,7 +382,7 @@ static const struct scsi_host_template nv_adma_sht = {
 	.can_queue		= NV_ADMA_MAX_CPBS,
 	.sg_tablesize		= NV_ADMA_SGTBL_TOTAL_LEN,
 	.dma_boundary		= NV_ADMA_DMA_BOUNDARY,
-	.slave_configure	= nv_adma_slave_config,
+	.device_configure	= nv_adma_device_configure,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth     = ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
@@ -391,7 +393,7 @@ static const struct scsi_host_template nv_swncq_sht = {
 	.can_queue		= ATA_MAX_QUEUE - 1,
 	.sg_tablesize		= LIBATA_MAX_PRD,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= nv_swncq_slave_config,
+	.device_configure	= nv_swncq_device_configure,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth     = ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
@@ -661,7 +663,8 @@ static void nv_adma_mode(struct ata_port *ap)
 	pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
 }
 
-static int nv_adma_slave_config(struct scsi_device *sdev)
+static int nv_adma_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct nv_adma_port_priv *pp = ap->private_data;
@@ -673,7 +676,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
 	int adma_enable;
 	u32 current_reg, new_reg, config_mask;
 
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 
 	if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
 		/* Not a proper libata device, ignore */
@@ -740,8 +743,8 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
 		rc = dma_set_mask(&pdev->dev, pp->adma_dma_mask);
 	}
 
-	blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
-	blk_queue_max_segments(sdev->request_queue, sg_tablesize);
+	lim->seg_boundary_mask = segment_boundary;
+	lim->max_segments = sg_tablesize;
 	ata_port_info(ap,
 		      "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
 		      (unsigned long long)*ap->host->dev->dma_mask,
@@ -1868,7 +1871,8 @@ static void nv_swncq_host_init(struct ata_host *host)
 	writel(~0x0, mmio + NV_INT_STATUS_MCP55);
 }
 
-static int nv_swncq_slave_config(struct scsi_device *sdev)
+static int nv_swncq_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -1878,7 +1882,7 @@ static int nv_swncq_slave_config(struct scsi_device *sdev)
 	u8 check_maxtor = 0;
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
 
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 	if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
 		/* Not a proper libata device, ignore */
 		return rc;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 142e70bfc4..72c03cbdaf 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -381,7 +381,7 @@ static const struct scsi_host_template sil24_sht = {
 	.tag_alloc_policy	= BLK_TAG_ALLOC_FIFO,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth	= ata_scsi_change_queue_depth,
-	.slave_configure	= ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 };
 
 static struct ata_port_operations sil24_ops = {