summaryrefslogtreecommitdiffstats
path: root/drivers/atm/solos-pci.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/atm/solos-pci.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/atm/solos-pci.c')
-rw-r--r--drivers/atm/solos-pci.c1496
1 files changed, 1496 insertions, 0 deletions
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
new file mode 100644
index 0000000000..d3c30a28c4
--- /dev/null
+++ b/drivers/atm/solos-pci.c
@@ -0,0 +1,1496 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
+ * Traverse Technologies -- https://www.traverse.com.au/
+ * Xrio Limited -- http://www.xrio.com/
+ *
+ * Copyright © 2008 Traverse Technologies
+ * Copyright © 2008 Intel Corporation
+ *
+ * Authors: Nathan Williams <nathan@traverse.com.au>
+ * David Woodhouse <dwmw2@infradead.org>
+ * Treker Chen <treker@xrio.com>
+ */
+
+#define DEBUG
+#define VERBOSE_DEBUG
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/skbuff.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/kobject.h>
+#include <linux/firmware.h>
+#include <linux/ctype.h>
+#include <linux/swab.h>
+#include <linux/slab.h>
+
+#define VERSION "1.04"
+#define DRIVER_VERSION 0x01
+#define PTAG "solos-pci"
+
+#define CONFIG_RAM_SIZE 128
+#define FLAGS_ADDR 0x7C
+#define IRQ_EN_ADDR 0x78
+#define FPGA_VER 0x74
+#define IRQ_CLEAR 0x70
+#define WRITE_FLASH 0x6C
+#define PORTS 0x68
+#define FLASH_BLOCK 0x64
+#define FLASH_BUSY 0x60
+#define FPGA_MODE 0x5C
+#define FLASH_MODE 0x58
+#define GPIO_STATUS 0x54
+#define DRIVER_VER 0x50
+#define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
+#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
+
+#define DATA_RAM_SIZE 32768
+#define BUF_SIZE 2048
+#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
+/* Old boards use ATMEL AD45DB161D flash */
+#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
+#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
+#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
+#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
+/* Current boards use M25P/M25PE SPI flash */
+#define SPI_FLASH_BLOCK (256 * 64)
+
+#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
+#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
+#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
+
+#define RX_DMA_SIZE 2048
+
+#define FPGA_VERSION(a,b) (((a) << 8) + (b))
+#define LEGACY_BUFFERS 2
+#define DMA_SUPPORTED 4
+
+static int reset = 0;
+static int atmdebug = 0;
+static int firmware_upgrade = 0;
+static int fpga_upgrade = 0;
+static int db_firmware_upgrade = 0;
+static int db_fpga_upgrade = 0;
+
+struct pkt_hdr {
+ __le16 size;
+ __le16 vpi;
+ __le16 vci;
+ __le16 type;
+};
+
+struct solos_skb_cb {
+ struct atm_vcc *vcc;
+ uint32_t dma_addr;
+};
+
+
+#define SKB_CB(skb) ((struct solos_skb_cb *)skb->cb)
+
+#define PKT_DATA 0
+#define PKT_COMMAND 1
+#define PKT_POPEN 3
+#define PKT_PCLOSE 4
+#define PKT_STATUS 5
+
+struct solos_card {
+ void __iomem *config_regs;
+ void __iomem *buffers;
+ int nr_ports;
+ int tx_mask;
+ struct pci_dev *dev;
+ struct atm_dev *atmdev[4];
+ struct tasklet_struct tlet;
+ spinlock_t tx_lock;
+ spinlock_t tx_queue_lock;
+ spinlock_t cli_queue_lock;
+ spinlock_t param_queue_lock;
+ struct list_head param_queue;
+ struct sk_buff_head tx_queue[4];
+ struct sk_buff_head cli_queue[4];
+ struct sk_buff *tx_skb[4];
+ struct sk_buff *rx_skb[4];
+ unsigned char *dma_bounce;
+ wait_queue_head_t param_wq;
+ wait_queue_head_t fw_wq;
+ int using_dma;
+ int dma_alignment;
+ int fpga_version;
+ int buffer_size;
+ int atmel_flash;
+};
+
+
+struct solos_param {
+ struct list_head list;
+ pid_t pid;
+ int port;
+ struct sk_buff *response;
+};
+
+#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
+
+MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
+MODULE_DESCRIPTION("Solos PCI driver");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("solos-FPGA.bin");
+MODULE_FIRMWARE("solos-Firmware.bin");
+MODULE_FIRMWARE("solos-db-FPGA.bin");
+MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
+MODULE_PARM_DESC(atmdebug, "Print ATM data");
+MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
+MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
+MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
+MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
+module_param(reset, int, 0444);
+module_param(atmdebug, int, 0644);
+module_param(firmware_upgrade, int, 0444);
+module_param(fpga_upgrade, int, 0444);
+module_param(db_firmware_upgrade, int, 0444);
+module_param(db_fpga_upgrade, int, 0444);
+
+static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
+ struct atm_vcc *vcc);
+static uint32_t fpga_tx(struct solos_card *);
+static irqreturn_t solos_irq(int irq, void *dev_id);
+static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
+static int atm_init(struct solos_card *, struct device *);
+static void atm_remove(struct solos_card *);
+static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
+static void solos_bh(unsigned long);
+static int print_buffer(struct sk_buff *buf);
+
+static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+ if (vcc->pop)
+ vcc->pop(vcc, skb);
+ else
+ dev_kfree_skb_any(skb);
+}
+
+static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+ struct solos_card *card = atmdev->dev_data;
+ struct solos_param prm;
+ struct sk_buff *skb;
+ struct pkt_hdr *header;
+ int buflen;
+
+ buflen = strlen(attr->attr.name) + 10;
+
+ skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
+ if (!skb) {
+ dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
+ return -ENOMEM;
+ }
+
+ header = skb_put(skb, sizeof(*header));
+
+ buflen = snprintf((void *)&header[1], buflen - 1,
+ "L%05d\n%s\n", current->pid, attr->attr.name);
+ skb_put(skb, buflen);
+
+ header->size = cpu_to_le16(buflen);
+ header->vpi = cpu_to_le16(0);
+ header->vci = cpu_to_le16(0);
+ header->type = cpu_to_le16(PKT_COMMAND);
+
+ prm.pid = current->pid;
+ prm.response = NULL;
+ prm.port = SOLOS_CHAN(atmdev);
+
+ spin_lock_irq(&card->param_queue_lock);
+ list_add(&prm.list, &card->param_queue);
+ spin_unlock_irq(&card->param_queue_lock);
+
+ fpga_queue(card, prm.port, skb, NULL);
+
+ wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
+
+ spin_lock_irq(&card->param_queue_lock);
+ list_del(&prm.list);
+ spin_unlock_irq(&card->param_queue_lock);
+
+ if (!prm.response)
+ return -EIO;
+
+ buflen = prm.response->len;
+ memcpy(buf, prm.response->data, buflen);
+ kfree_skb(prm.response);
+
+ return buflen;
+}
+
+static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+ struct solos_card *card = atmdev->dev_data;
+ struct solos_param prm;
+ struct sk_buff *skb;
+ struct pkt_hdr *header;
+ int buflen;
+ ssize_t ret;
+
+ buflen = strlen(attr->attr.name) + 11 + count;
+
+ skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
+ if (!skb) {
+ dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
+ return -ENOMEM;
+ }
+
+ header = skb_put(skb, sizeof(*header));
+
+ buflen = snprintf((void *)&header[1], buflen - 1,
+ "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
+
+ skb_put(skb, buflen);
+ header->size = cpu_to_le16(buflen);
+ header->vpi = cpu_to_le16(0);
+ header->vci = cpu_to_le16(0);
+ header->type = cpu_to_le16(PKT_COMMAND);
+
+ prm.pid = current->pid;
+ prm.response = NULL;
+ prm.port = SOLOS_CHAN(atmdev);
+
+ spin_lock_irq(&card->param_queue_lock);
+ list_add(&prm.list, &card->param_queue);
+ spin_unlock_irq(&card->param_queue_lock);
+
+ fpga_queue(card, prm.port, skb, NULL);
+
+ wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
+
+ spin_lock_irq(&card->param_queue_lock);
+ list_del(&prm.list);
+ spin_unlock_irq(&card->param_queue_lock);
+
+ skb = prm.response;
+
+ if (!skb)
+ return -EIO;
+
+ buflen = skb->len;
+
+ /* Sometimes it has a newline, sometimes it doesn't. */
+ if (skb->data[buflen - 1] == '\n')
+ buflen--;
+
+ if (buflen == 2 && !strncmp(skb->data, "OK", 2))
+ ret = count;
+ else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
+ ret = -EIO;
+ else {
+ /* We know we have enough space allocated for this; we allocated
+ it ourselves */
+ skb->data[buflen] = 0;
+
+ dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
+ skb->data);
+ ret = -EIO;
+ }
+ kfree_skb(skb);
+
+ return ret;
+}
+
+static char *next_string(struct sk_buff *skb)
+{
+ int i = 0;
+ char *this = skb->data;
+
+ for (i = 0; i < skb->len; i++) {
+ if (this[i] == '\n') {
+ this[i] = 0;
+ skb_pull(skb, i + 1);
+ return this;
+ }
+ if (!isprint(this[i]))
+ return NULL;
+ }
+ return NULL;
+}
+
+/*
+ * Status packet has fields separated by \n, starting with a version number
+ * for the information therein. Fields are....
+ *
+ * packet version
+ * RxBitRate (version >= 1)
+ * TxBitRate (version >= 1)
+ * State (version >= 1)
+ * LocalSNRMargin (version >= 1)
+ * LocalLineAttn (version >= 1)
+ */
+static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
+{
+ char *str, *state_str, *snr, *attn;
+ int ver, rate_up, rate_down, err;
+
+ if (!card->atmdev[port])
+ return -ENODEV;
+
+ str = next_string(skb);
+ if (!str)
+ return -EIO;
+
+ err = kstrtoint(str, 10, &ver);
+ if (err) {
+ dev_warn(&card->dev->dev, "Unexpected status interrupt version\n");
+ return err;
+ }
+ if (ver < 1) {
+ dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
+ ver);
+ return -EIO;
+ }
+
+ str = next_string(skb);
+ if (!str)
+ return -EIO;
+ if (!strcmp(str, "ERROR")) {
+ dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
+ port);
+ return 0;
+ }
+
+ err = kstrtoint(str, 10, &rate_down);
+ if (err)
+ return err;
+
+ str = next_string(skb);
+ if (!str)
+ return -EIO;
+ err = kstrtoint(str, 10, &rate_up);
+ if (err)
+ return err;
+
+ state_str = next_string(skb);
+ if (!state_str)
+ return -EIO;
+
+ /* Anything but 'Showtime' is down */
+ if (strcmp(state_str, "Showtime")) {
+ atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
+ dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
+ return 0;
+ }
+
+ snr = next_string(skb);
+ if (!snr)
+ return -EIO;
+ attn = next_string(skb);
+ if (!attn)
+ return -EIO;
+
+ dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
+ port, state_str, rate_down/1000, rate_up/1000,
+ snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
+
+ card->atmdev[port]->link_rate = rate_down / 424;
+ atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
+
+ return 0;
+}
+
+static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
+{
+ struct solos_param *prm;
+ unsigned long flags;
+ int cmdpid;
+ int found = 0, err;
+
+ if (skb->len < 7)
+ return 0;
+
+ if (skb->data[0] != 'L' || !isdigit(skb->data[1]) ||
+ !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
+ !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
+ skb->data[6] != '\n')
+ return 0;
+
+ err = kstrtoint(&skb->data[1], 10, &cmdpid);
+ if (err)
+ return err;
+
+ spin_lock_irqsave(&card->param_queue_lock, flags);
+ list_for_each_entry(prm, &card->param_queue, list) {
+ if (prm->port == port && prm->pid == cmdpid) {
+ prm->response = skb;
+ skb_pull(skb, 7);
+ wake_up(&card->param_wq);
+ found = 1;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&card->param_queue_lock, flags);
+ return found;
+}
+
+static ssize_t console_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+ struct solos_card *card = atmdev->dev_data;
+ struct sk_buff *skb;
+ unsigned int len;
+
+ spin_lock_bh(&card->cli_queue_lock);
+ skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
+ spin_unlock_bh(&card->cli_queue_lock);
+ if(skb == NULL)
+ return sprintf(buf, "No data.\n");
+
+ len = skb->len;
+ memcpy(buf, skb->data, len);
+
+ kfree_skb(skb);
+ return len;
+}
+
+static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
+{
+ struct sk_buff *skb;
+ struct pkt_hdr *header;
+
+ if (size > (BUF_SIZE - sizeof(*header))) {
+ dev_dbg(&card->dev->dev, "Command is too big. Dropping request\n");
+ return 0;
+ }
+ skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
+ if (!skb) {
+ dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
+ return 0;
+ }
+
+ header = skb_put(skb, sizeof(*header));
+
+ header->size = cpu_to_le16(size);
+ header->vpi = cpu_to_le16(0);
+ header->vci = cpu_to_le16(0);
+ header->type = cpu_to_le16(PKT_COMMAND);
+
+ skb_put_data(skb, buf, size);
+
+ fpga_queue(card, dev, skb, NULL);
+
+ return 0;
+}
+
+static ssize_t console_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+ struct solos_card *card = atmdev->dev_data;
+ int err;
+
+ err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
+
+ return err?:count;
+}
+
+struct geos_gpio_attr {
+ struct device_attribute attr;
+ int offset;
+};
+
+#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset) \
+ struct geos_gpio_attr gpio_attr_##_name = { \
+ .attr = __ATTR(_name, _mode, _show, _store), \
+ .offset = _offset }
+
+static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = dev_get_drvdata(dev);
+ uint32_t data32;
+
+ if (count != 1 && (count != 2 || buf[1] != '\n'))
+ return -EINVAL;
+
+ spin_lock_irq(&card->param_queue_lock);
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ if (buf[0] == '1') {
+ data32 |= 1 << gattr->offset;
+ iowrite32(data32, card->config_regs + GPIO_STATUS);
+ } else if (buf[0] == '0') {
+ data32 &= ~(1 << gattr->offset);
+ iowrite32(data32, card->config_regs + GPIO_STATUS);
+ } else {
+ count = -EINVAL;
+ }
+ spin_unlock_irq(&card->param_queue_lock);
+ return count;
+}
+
+static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = dev_get_drvdata(dev);
+ uint32_t data32;
+
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ data32 = (data32 >> gattr->offset) & 1;
+
+ return sprintf(buf, "%d\n", data32);
+}
+
+static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+ struct solos_card *card = dev_get_drvdata(dev);
+ uint32_t data32;
+
+ data32 = ioread32(card->config_regs + GPIO_STATUS);
+ switch (gattr->offset) {
+ case 0:
+ /* HardwareVersion */
+ data32 = data32 & 0x1F;
+ break;
+ case 1:
+ /* HardwareVariant */
+ data32 = (data32 >> 5) & 0x0F;
+ break;
+ }
+ return sprintf(buf, "%d\n", data32);
+}
+
+static DEVICE_ATTR_RW(console);
+
+
+#define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
+#define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
+
+#include "solos-attrlist.c"
+
+static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
+static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
+static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
+static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
+static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
+static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
+static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
+static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
+#undef SOLOS_ATTR_RO
+#undef SOLOS_ATTR_RW
+
+#define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
+#define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
+
+static struct attribute *solos_attrs[] = {
+#include "solos-attrlist.c"
+ NULL
+};
+
+static const struct attribute_group solos_attr_group = {
+ .attrs = solos_attrs,
+ .name = "parameters",
+};
+
+static struct attribute *gpio_attrs[] = {
+ &gpio_attr_GPIO1.attr.attr,
+ &gpio_attr_GPIO2.attr.attr,
+ &gpio_attr_GPIO3.attr.attr,
+ &gpio_attr_GPIO4.attr.attr,
+ &gpio_attr_GPIO5.attr.attr,
+ &gpio_attr_PushButton.attr.attr,
+ &gpio_attr_HardwareVersion.attr.attr,
+ &gpio_attr_HardwareVariant.attr.attr,
+ NULL
+};
+
+static const struct attribute_group gpio_attr_group = {
+ .attrs = gpio_attrs,
+ .name = "gpio",
+};
+
+static int flash_upgrade(struct solos_card *card, int chip)
+{
+ const struct firmware *fw;
+ const char *fw_name;
+ int blocksize = 0;
+ int numblocks = 0;
+ int offset;
+
+ switch (chip) {
+ case 0:
+ fw_name = "solos-FPGA.bin";
+ if (card->atmel_flash)
+ blocksize = ATMEL_FPGA_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
+ break;
+ case 1:
+ fw_name = "solos-Firmware.bin";
+ if (card->atmel_flash)
+ blocksize = ATMEL_SOLOS_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
+ break;
+ case 2:
+ if (card->fpga_version > LEGACY_BUFFERS){
+ fw_name = "solos-db-FPGA.bin";
+ if (card->atmel_flash)
+ blocksize = ATMEL_FPGA_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
+ } else {
+ dev_info(&card->dev->dev, "FPGA version doesn't support"
+ " daughter board upgrades\n");
+ return -EPERM;
+ }
+ break;
+ case 3:
+ if (card->fpga_version > LEGACY_BUFFERS){
+ fw_name = "solos-Firmware.bin";
+ if (card->atmel_flash)
+ blocksize = ATMEL_SOLOS_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
+ } else {
+ dev_info(&card->dev->dev, "FPGA version doesn't support"
+ " daughter board upgrades\n");
+ return -EPERM;
+ }
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ if (request_firmware(&fw, fw_name, &card->dev->dev))
+ return -ENOENT;
+
+ dev_info(&card->dev->dev, "Flash upgrade starting\n");
+
+ /* New FPGAs require driver version before permitting flash upgrades */
+ iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
+
+ numblocks = fw->size / blocksize;
+ dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
+ dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
+
+ dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
+ iowrite32(1, card->config_regs + FPGA_MODE);
+ (void) ioread32(card->config_regs + FPGA_MODE);
+
+ /* Set mode to Chip Erase */
+ if(chip == 0 || chip == 2)
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
+ if(chip == 1 || chip == 3)
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
+ iowrite32((chip * 2), card->config_regs + FLASH_MODE);
+
+
+ iowrite32(1, card->config_regs + WRITE_FLASH);
+ wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
+
+ for (offset = 0; offset < fw->size; offset += blocksize) {
+ int i;
+
+ /* Clear write flag */
+ iowrite32(0, card->config_regs + WRITE_FLASH);
+
+ /* Set mode to Block Write */
+ /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
+ iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
+
+ /* Copy block to buffer, swapping each 16 bits for Atmel flash */
+ for(i = 0; i < blocksize; i += 4) {
+ uint32_t word;
+ if (card->atmel_flash)
+ word = swahb32p((uint32_t *)(fw->data + offset + i));
+ else
+ word = *(uint32_t *)(fw->data + offset + i);
+ if(card->fpga_version > LEGACY_BUFFERS)
+ iowrite32(word, FLASH_BUF + i);
+ else
+ iowrite32(word, RX_BUF(card, 3) + i);
+ }
+
+ /* Specify block number and then trigger flash write */
+ iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
+ iowrite32(1, card->config_regs + WRITE_FLASH);
+ wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
+ }
+
+ release_firmware(fw);
+ iowrite32(0, card->config_regs + WRITE_FLASH);
+ iowrite32(0, card->config_regs + FPGA_MODE);
+ iowrite32(0, card->config_regs + FLASH_MODE);
+ dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
+ return 0;
+}
+
+static irqreturn_t solos_irq(int irq, void *dev_id)
+{
+ struct solos_card *card = dev_id;
+ int handled = 1;
+
+ iowrite32(0, card->config_regs + IRQ_CLEAR);
+
+ /* If we're up and running, just kick the tasklet to process TX/RX */
+ if (card->atmdev[0])
+ tasklet_schedule(&card->tlet);
+ else
+ wake_up(&card->fw_wq);
+
+ return IRQ_RETVAL(handled);
+}
+
+static void solos_bh(unsigned long card_arg)
+{
+ struct solos_card *card = (void *)card_arg;
+ uint32_t card_flags;
+ uint32_t rx_done = 0;
+ int port;
+
+ /*
+ * Since fpga_tx() is going to need to read the flags under its lock,
+ * it can return them to us so that we don't have to hit PCI MMIO
+ * again for the same information
+ */
+ card_flags = fpga_tx(card);
+
+ for (port = 0; port < card->nr_ports; port++) {
+ if (card_flags & (0x10 << port)) {
+ struct pkt_hdr _hdr, *header;
+ struct sk_buff *skb;
+ struct atm_vcc *vcc;
+ int size;
+
+ if (card->using_dma) {
+ skb = card->rx_skb[port];
+ card->rx_skb[port] = NULL;
+
+ dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
+ RX_DMA_SIZE, DMA_FROM_DEVICE);
+
+ header = (void *)skb->data;
+ size = le16_to_cpu(header->size);
+ skb_put(skb, size + sizeof(*header));
+ skb_pull(skb, sizeof(*header));
+ } else {
+ header = &_hdr;
+
+ rx_done |= 0x10 << port;
+
+ memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
+
+ size = le16_to_cpu(header->size);
+ if (size > (card->buffer_size - sizeof(*header))){
+ dev_warn(&card->dev->dev, "Invalid buffer size\n");
+ continue;
+ }
+
+ /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
+ * headroom, and ensures we can route packets back out an
+ * Ethernet interface (for example) without having to
+ * reallocate. Adding NET_IP_ALIGN also ensures that both
+ * PPPoATM and PPPoEoBR2684 packets end up aligned. */
+ skb = netdev_alloc_skb_ip_align(NULL, size + 1);
+ if (!skb) {
+ if (net_ratelimit())
+ dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
+ continue;
+ }
+
+ memcpy_fromio(skb_put(skb, size),
+ RX_BUF(card, port) + sizeof(*header),
+ size);
+ }
+ if (atmdebug) {
+ dev_info(&card->dev->dev, "Received: port %d\n", port);
+ dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
+ size, le16_to_cpu(header->vpi),
+ le16_to_cpu(header->vci));
+ print_buffer(skb);
+ }
+
+ switch (le16_to_cpu(header->type)) {
+ case PKT_DATA:
+ vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
+ le16_to_cpu(header->vci));
+ if (!vcc) {
+ if (net_ratelimit())
+ dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
+ le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
+ port);
+ dev_kfree_skb_any(skb);
+ break;
+ }
+ atm_charge(vcc, skb->truesize);
+ vcc->push(vcc, skb);
+ atomic_inc(&vcc->stats->rx);
+ break;
+
+ case PKT_STATUS:
+ if (process_status(card, port, skb) &&
+ net_ratelimit()) {
+ dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
+ print_buffer(skb);
+ }
+ dev_kfree_skb_any(skb);
+ break;
+
+ case PKT_COMMAND:
+ default: /* FIXME: Not really, surely? */
+ if (process_command(card, port, skb))
+ break;
+ spin_lock(&card->cli_queue_lock);
+ if (skb_queue_len(&card->cli_queue[port]) > 10) {
+ if (net_ratelimit())
+ dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
+ port);
+ dev_kfree_skb_any(skb);
+ } else
+ skb_queue_tail(&card->cli_queue[port], skb);
+ spin_unlock(&card->cli_queue_lock);
+ break;
+ }
+ }
+ /* Allocate RX skbs for any ports which need them */
+ if (card->using_dma && card->atmdev[port] &&
+ !card->rx_skb[port]) {
+ /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
+ * here; the FPGA can only DMA to addresses which are
+ * aligned to 4 bytes. */
+ struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
+ if (skb) {
+ SKB_CB(skb)->dma_addr =
+ dma_map_single(&card->dev->dev, skb->data,
+ RX_DMA_SIZE, DMA_FROM_DEVICE);
+ iowrite32(SKB_CB(skb)->dma_addr,
+ card->config_regs + RX_DMA_ADDR(port));
+ card->rx_skb[port] = skb;
+ } else {
+ if (net_ratelimit())
+ dev_warn(&card->dev->dev, "Failed to allocate RX skb");
+
+ /* We'll have to try again later */
+ tasklet_schedule(&card->tlet);
+ }
+ }
+ }
+ if (rx_done)
+ iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
+
+ return;
+}
+
+static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
+{
+ struct hlist_head *head;
+ struct atm_vcc *vcc = NULL;
+ struct sock *s;
+
+ read_lock(&vcc_sklist_lock);
+ head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
+ sk_for_each(s, head) {
+ vcc = atm_sk(s);
+ if (vcc->dev == dev && vcc->vci == vci &&
+ vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
+ test_bit(ATM_VF_READY, &vcc->flags))
+ goto out;
+ }
+ vcc = NULL;
+ out:
+ read_unlock(&vcc_sklist_lock);
+ return vcc;
+}
+
+static int popen(struct atm_vcc *vcc)
+{
+ struct solos_card *card = vcc->dev->dev_data;
+ struct sk_buff *skb;
+ struct pkt_hdr *header;
+
+ if (vcc->qos.aal != ATM_AAL5) {
+ dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
+ vcc->qos.aal);
+ return -EINVAL;
+ }
+
+ skb = alloc_skb(sizeof(*header), GFP_KERNEL);
+ if (!skb) {
+ if (net_ratelimit())
+ dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
+ return -ENOMEM;
+ }
+ header = skb_put(skb, sizeof(*header));
+
+ header->size = cpu_to_le16(0);
+ header->vpi = cpu_to_le16(vcc->vpi);
+ header->vci = cpu_to_le16(vcc->vci);
+ header->type = cpu_to_le16(PKT_POPEN);
+
+ fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
+
+ set_bit(ATM_VF_ADDR, &vcc->flags);
+ set_bit(ATM_VF_READY, &vcc->flags);
+
+ return 0;
+}
+
+static void pclose(struct atm_vcc *vcc)
+{
+ struct solos_card *card = vcc->dev->dev_data;
+ unsigned char port = SOLOS_CHAN(vcc->dev);
+ struct sk_buff *skb, *tmpskb;
+ struct pkt_hdr *header;
+
+ /* Remove any yet-to-be-transmitted packets from the pending queue */
+ spin_lock_bh(&card->tx_queue_lock);
+ skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
+ if (SKB_CB(skb)->vcc == vcc) {
+ skb_unlink(skb, &card->tx_queue[port]);
+ solos_pop(vcc, skb);
+ }
+ }
+ spin_unlock_bh(&card->tx_queue_lock);
+
+ skb = alloc_skb(sizeof(*header), GFP_KERNEL);
+ if (!skb) {
+ dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
+ return;
+ }
+ header = skb_put(skb, sizeof(*header));
+
+ header->size = cpu_to_le16(0);
+ header->vpi = cpu_to_le16(vcc->vpi);
+ header->vci = cpu_to_le16(vcc->vci);
+ header->type = cpu_to_le16(PKT_PCLOSE);
+
+ skb_get(skb);
+ fpga_queue(card, port, skb, NULL);
+
+ if (!wait_event_timeout(card->param_wq, !skb_shared(skb), 5 * HZ))
+ dev_warn(&card->dev->dev,
+ "Timeout waiting for VCC close on port %d\n", port);
+
+ dev_kfree_skb(skb);
+
+ /* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
+ tasklet has finished processing any incoming packets (and, more to
+ the point, using the vcc pointer). */
+ tasklet_unlock_wait(&card->tlet);
+
+ clear_bit(ATM_VF_ADDR, &vcc->flags);
+
+ return;
+}
+
+static int print_buffer(struct sk_buff *buf)
+{
+ int len,i;
+ char msg[500];
+ char item[10];
+
+ len = buf->len;
+ for (i = 0; i < len; i++){
+ if(i % 8 == 0)
+ sprintf(msg, "%02X: ", i);
+
+ sprintf(item,"%02X ",*(buf->data + i));
+ strcat(msg, item);
+ if(i % 8 == 7) {
+ sprintf(item, "\n");
+ strcat(msg, item);
+ printk(KERN_DEBUG "%s", msg);
+ }
+ }
+ if (i % 8 != 0) {
+ sprintf(item, "\n");
+ strcat(msg, item);
+ printk(KERN_DEBUG "%s", msg);
+ }
+ printk(KERN_DEBUG "\n");
+
+ return 0;
+}
+
+static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
+ struct atm_vcc *vcc)
+{
+ int old_len;
+ unsigned long flags;
+
+ SKB_CB(skb)->vcc = vcc;
+
+ spin_lock_irqsave(&card->tx_queue_lock, flags);
+ old_len = skb_queue_len(&card->tx_queue[port]);
+ skb_queue_tail(&card->tx_queue[port], skb);
+ if (!old_len)
+ card->tx_mask |= (1 << port);
+ spin_unlock_irqrestore(&card->tx_queue_lock, flags);
+
+ /* Theoretically we could just schedule the tasklet here, but
+ that introduces latency we don't want -- it's noticeable */
+ if (!old_len)
+ fpga_tx(card);
+}
+
+static uint32_t fpga_tx(struct solos_card *card)
+{
+ uint32_t tx_pending, card_flags;
+ uint32_t tx_started = 0;
+ struct sk_buff *skb;
+ struct atm_vcc *vcc;
+ unsigned char port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->tx_lock, flags);
+
+ card_flags = ioread32(card->config_regs + FLAGS_ADDR);
+ /*
+ * The queue lock is required for _writing_ to tx_mask, but we're
+ * OK to read it here without locking. The only potential update
+ * that we could race with is in fpga_queue() where it sets a bit
+ * for a new port... but it's going to call this function again if
+ * it's doing that, anyway.
+ */
+ tx_pending = card->tx_mask & ~card_flags;
+
+ for (port = 0; tx_pending; tx_pending >>= 1, port++) {
+ if (tx_pending & 1) {
+ struct sk_buff *oldskb = card->tx_skb[port];
+ if (oldskb) {
+ dma_unmap_single(&card->dev->dev, SKB_CB(oldskb)->dma_addr,
+ oldskb->len, DMA_TO_DEVICE);
+ card->tx_skb[port] = NULL;
+ }
+ spin_lock(&card->tx_queue_lock);
+ skb = skb_dequeue(&card->tx_queue[port]);
+ if (!skb)
+ card->tx_mask &= ~(1 << port);
+ spin_unlock(&card->tx_queue_lock);
+
+ if (skb && !card->using_dma) {
+ memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
+ tx_started |= 1 << port;
+ oldskb = skb; /* We're done with this skb already */
+ } else if (skb && card->using_dma) {
+ unsigned char *data = skb->data;
+ if ((unsigned long)data & card->dma_alignment) {
+ data = card->dma_bounce + (BUF_SIZE * port);
+ memcpy(data, skb->data, skb->len);
+ }
+ SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, data,
+ skb->len, DMA_TO_DEVICE);
+ card->tx_skb[port] = skb;
+ iowrite32(SKB_CB(skb)->dma_addr,
+ card->config_regs + TX_DMA_ADDR(port));
+ }
+
+ if (!oldskb)
+ continue;
+
+ /* Clean up and free oldskb now it's gone */
+ if (atmdebug) {
+ struct pkt_hdr *header = (void *)oldskb->data;
+ int size = le16_to_cpu(header->size);
+
+ skb_pull(oldskb, sizeof(*header));
+ dev_info(&card->dev->dev, "Transmitted: port %d\n",
+ port);
+ dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
+ size, le16_to_cpu(header->vpi),
+ le16_to_cpu(header->vci));
+ print_buffer(oldskb);
+ }
+
+ vcc = SKB_CB(oldskb)->vcc;
+
+ if (vcc) {
+ atomic_inc(&vcc->stats->tx);
+ solos_pop(vcc, oldskb);
+ } else {
+ dev_kfree_skb_irq(oldskb);
+ wake_up(&card->param_wq);
+ }
+ }
+ }
+ /* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
+ if (tx_started)
+ iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
+
+ spin_unlock_irqrestore(&card->tx_lock, flags);
+ return card_flags;
+}
+
+static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+ struct solos_card *card = vcc->dev->dev_data;
+ struct pkt_hdr *header;
+ int pktlen;
+
+ pktlen = skb->len;
+ if (pktlen > (BUF_SIZE - sizeof(*header))) {
+ dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
+ solos_pop(vcc, skb);
+ return 0;
+ }
+
+ if (!skb_clone_writable(skb, sizeof(*header))) {
+ int expand_by = 0;
+ int ret;
+
+ if (skb_headroom(skb) < sizeof(*header))
+ expand_by = sizeof(*header) - skb_headroom(skb);
+
+ ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
+ if (ret) {
+ dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
+ solos_pop(vcc, skb);
+ return ret;
+ }
+ }
+
+ header = skb_push(skb, sizeof(*header));
+
+ /* This does _not_ include the size of the header */
+ header->size = cpu_to_le16(pktlen);
+ header->vpi = cpu_to_le16(vcc->vpi);
+ header->vci = cpu_to_le16(vcc->vci);
+ header->type = cpu_to_le16(PKT_DATA);
+
+ fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
+
+ return 0;
+}
+
+static const struct atmdev_ops fpga_ops = {
+ .open = popen,
+ .close = pclose,
+ .ioctl = NULL,
+ .send = psend,
+ .send_oam = NULL,
+ .phy_put = NULL,
+ .phy_get = NULL,
+ .change_qos = NULL,
+ .proc_read = NULL,
+ .owner = THIS_MODULE
+};
+
+static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int err;
+ uint16_t fpga_ver;
+ uint8_t major_ver, minor_ver;
+ uint32_t data32;
+ struct solos_card *card;
+
+ card = kzalloc(sizeof(*card), GFP_KERNEL);
+ if (!card)
+ return -ENOMEM;
+
+ card->dev = dev;
+ init_waitqueue_head(&card->fw_wq);
+ init_waitqueue_head(&card->param_wq);
+
+ err = pci_enable_device(dev);
+ if (err) {
+ dev_warn(&dev->dev, "Failed to enable PCI device\n");
+ goto out;
+ }
+
+ err = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
+ goto out;
+ }
+
+ err = pci_request_regions(dev, "solos");
+ if (err) {
+ dev_warn(&dev->dev, "Failed to request regions\n");
+ goto out;
+ }
+
+ card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
+ if (!card->config_regs) {
+ dev_warn(&dev->dev, "Failed to ioremap config registers\n");
+ err = -ENOMEM;
+ goto out_release_regions;
+ }
+ card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
+ if (!card->buffers) {
+ dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
+ err = -ENOMEM;
+ goto out_unmap_config;
+ }
+
+ if (reset) {
+ iowrite32(1, card->config_regs + FPGA_MODE);
+ ioread32(card->config_regs + FPGA_MODE);
+
+ iowrite32(0, card->config_regs + FPGA_MODE);
+ ioread32(card->config_regs + FPGA_MODE);
+ }
+
+ data32 = ioread32(card->config_regs + FPGA_VER);
+ fpga_ver = (data32 & 0x0000FFFF);
+ major_ver = ((data32 & 0xFF000000) >> 24);
+ minor_ver = ((data32 & 0x00FF0000) >> 16);
+ card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
+ if (card->fpga_version > LEGACY_BUFFERS)
+ card->buffer_size = BUF_SIZE;
+ else
+ card->buffer_size = OLD_BUF_SIZE;
+ dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
+ major_ver, minor_ver, fpga_ver);
+
+ if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
+ db_fpga_upgrade || db_firmware_upgrade)) {
+ dev_warn(&dev->dev,
+ "FPGA too old; cannot upgrade flash. Use JTAG.\n");
+ fpga_upgrade = firmware_upgrade = 0;
+ db_fpga_upgrade = db_firmware_upgrade = 0;
+ }
+
+ /* Stopped using Atmel flash after 0.03-38 */
+ if (fpga_ver < 39)
+ card->atmel_flash = 1;
+ else
+ card->atmel_flash = 0;
+
+ data32 = ioread32(card->config_regs + PORTS);
+ card->nr_ports = (data32 & 0x000000FF);
+
+ if (card->fpga_version >= DMA_SUPPORTED) {
+ pci_set_master(dev);
+ card->using_dma = 1;
+ if (1) { /* All known FPGA versions so far */
+ card->dma_alignment = 3;
+ card->dma_bounce = kmalloc_array(card->nr_ports,
+ BUF_SIZE, GFP_KERNEL);
+ if (!card->dma_bounce) {
+ dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
+ err = -ENOMEM;
+ /* Fallback to MMIO doesn't work */
+ goto out_unmap_both;
+ }
+ }
+ } else {
+ card->using_dma = 0;
+ /* Set RX empty flag for all ports */
+ iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
+ }
+
+ pci_set_drvdata(dev, card);
+
+ tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
+ spin_lock_init(&card->tx_lock);
+ spin_lock_init(&card->tx_queue_lock);
+ spin_lock_init(&card->cli_queue_lock);
+ spin_lock_init(&card->param_queue_lock);
+ INIT_LIST_HEAD(&card->param_queue);
+
+ err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
+ "solos-pci", card);
+ if (err) {
+ dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
+ goto out_unmap_both;
+ }
+
+ iowrite32(1, card->config_regs + IRQ_EN_ADDR);
+
+ if (fpga_upgrade)
+ flash_upgrade(card, 0);
+
+ if (firmware_upgrade)
+ flash_upgrade(card, 1);
+
+ if (db_fpga_upgrade)
+ flash_upgrade(card, 2);
+
+ if (db_firmware_upgrade)
+ flash_upgrade(card, 3);
+
+ err = atm_init(card, &dev->dev);
+ if (err)
+ goto out_free_irq;
+
+ if (card->fpga_version >= DMA_SUPPORTED &&
+ sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
+ dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
+
+ return 0;
+
+ out_free_irq:
+ iowrite32(0, card->config_regs + IRQ_EN_ADDR);
+ free_irq(dev->irq, card);
+ tasklet_kill(&card->tlet);
+
+ out_unmap_both:
+ kfree(card->dma_bounce);
+ pci_iounmap(dev, card->buffers);
+ out_unmap_config:
+ pci_iounmap(dev, card->config_regs);
+ out_release_regions:
+ pci_release_regions(dev);
+ out:
+ kfree(card);
+ return err;
+}
+
+static int atm_init(struct solos_card *card, struct device *parent)
+{
+ int i;
+
+ for (i = 0; i < card->nr_ports; i++) {
+ struct sk_buff *skb;
+ struct pkt_hdr *header;
+
+ skb_queue_head_init(&card->tx_queue[i]);
+ skb_queue_head_init(&card->cli_queue[i]);
+
+ card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
+ if (!card->atmdev[i]) {
+ dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
+ atm_remove(card);
+ return -ENODEV;
+ }
+ if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
+ dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
+ if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
+ dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
+
+ dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
+
+ card->atmdev[i]->ci_range.vpi_bits = 8;
+ card->atmdev[i]->ci_range.vci_bits = 16;
+ card->atmdev[i]->dev_data = card;
+ card->atmdev[i]->phy_data = (void *)(unsigned long)i;
+ atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
+
+ skb = alloc_skb(sizeof(*header), GFP_KERNEL);
+ if (!skb) {
+ dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
+ continue;
+ }
+
+ header = skb_put(skb, sizeof(*header));
+
+ header->size = cpu_to_le16(0);
+ header->vpi = cpu_to_le16(0);
+ header->vci = cpu_to_le16(0);
+ header->type = cpu_to_le16(PKT_STATUS);
+
+ fpga_queue(card, i, skb, NULL);
+ }
+ return 0;
+}
+
+static void atm_remove(struct solos_card *card)
+{
+ int i;
+
+ for (i = 0; i < card->nr_ports; i++) {
+ if (card->atmdev[i]) {
+ struct sk_buff *skb;
+
+ dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
+
+ sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
+ atm_dev_deregister(card->atmdev[i]);
+
+ skb = card->rx_skb[i];
+ if (skb) {
+ dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
+ RX_DMA_SIZE, DMA_FROM_DEVICE);
+ dev_kfree_skb(skb);
+ }
+ skb = card->tx_skb[i];
+ if (skb) {
+ dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
+ skb->len, DMA_TO_DEVICE);
+ dev_kfree_skb(skb);
+ }
+ while ((skb = skb_dequeue(&card->tx_queue[i])))
+ dev_kfree_skb(skb);
+
+ }
+ }
+}
+
+static void fpga_remove(struct pci_dev *dev)
+{
+ struct solos_card *card = pci_get_drvdata(dev);
+
+ /* Disable IRQs */
+ iowrite32(0, card->config_regs + IRQ_EN_ADDR);
+
+ /* Reset FPGA */
+ iowrite32(1, card->config_regs + FPGA_MODE);
+ (void)ioread32(card->config_regs + FPGA_MODE);
+
+ if (card->fpga_version >= DMA_SUPPORTED)
+ sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
+
+ atm_remove(card);
+
+ free_irq(dev->irq, card);
+ tasklet_kill(&card->tlet);
+
+ kfree(card->dma_bounce);
+
+ /* Release device from reset */
+ iowrite32(0, card->config_regs + FPGA_MODE);
+ (void)ioread32(card->config_regs + FPGA_MODE);
+
+ pci_iounmap(dev, card->buffers);
+ pci_iounmap(dev, card->config_regs);
+
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+
+ kfree(card);
+}
+
+static const struct pci_device_id fpga_pci_tbl[] = {
+ { 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
+
+static struct pci_driver fpga_driver = {
+ .name = "solos",
+ .id_table = fpga_pci_tbl,
+ .probe = fpga_probe,
+ .remove = fpga_remove,
+};
+
+
+static int __init solos_pci_init(void)
+{
+ BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb));
+
+ printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
+ return pci_register_driver(&fpga_driver);
+}
+
+static void __exit solos_pci_exit(void)
+{
+ pci_unregister_driver(&fpga_driver);
+ printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
+}
+
+module_init(solos_pci_init);
+module_exit(solos_pci_exit);