Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 875 insertions, 417 deletions

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index d944d5298e..69d2138d7e 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -16,6 +16,9 @@ menuconfig AUXDISPLAY
 
 if AUXDISPLAY
 
+#
+# Character LCD section
+#
 config CHARLCD
 	tristate "Character LCD core support" if COMPILE_TEST
 	help
@@ -25,12 +28,6 @@ config CHARLCD
 	  This is some character LCD core interface that multiple drivers can
 	  use.
 
-config LINEDISP
-	tristate "Character line display core support" if COMPILE_TEST
-	help
-	  This is the core support for single-line character displays, to be
-	  selected by drivers that use it.
-
 config HD44780_COMMON
 	tristate "Common functions for HD44780 (and compatibles) LCD displays" if COMPILE_TEST
 	select CHARLCD
@@ -52,131 +49,6 @@ config HD44780
 	  kernel and started at boot.
 	  If you don't understand what all this is about, say N.
 
-config KS0108
-	tristate "KS0108 LCD Controller"
-	depends on PARPORT_PC
-	default n
-	help
-	  If you have a LCD controlled by one or more KS0108
-	  controllers, say Y. You will need also another more specific
-	  driver for your LCD.
-
-	  Depends on Parallel Port support. If you say Y at
-	  parport, you will be able to compile this as a module (M)
-	  and built-in as well (Y).
-
-	  To compile this as a module, choose M here:
-	  the module will be called ks0108.
-
-	  If unsure, say N.
-
-config KS0108_PORT
-	hex "Parallel port where the LCD is connected"
-	depends on KS0108
-	default 0x378
-	help
-	  The address of the parallel port where the LCD is connected.
-
-	  The first  standard parallel port address is 0x378.
-	  The second standard parallel port address is 0x278.
-	  The third  standard parallel port address is 0x3BC.
-
-	  You can specify a different address if you need.
-
-	  If you don't know what I'm talking about, load the parport module,
-	  and execute "dmesg" or "cat /proc/ioports". You can see there how
-	  many parallel ports are present and which address each one has.
-
-	  Usually you only need to use 0x378.
-
-	  If you compile this as a module, you can still override this
-	  using the module parameters.
-
-config KS0108_DELAY
-	int "Delay between each control writing (microseconds)"
-	depends on KS0108
-	default "2"
-	help
-	  Amount of time the ks0108 should wait between each control write
-	  to the parallel port.
-
-	  If your LCD seems to miss random writings, increment this.
-
-	  If you don't know what I'm talking about, ignore it.
-
-	  If you compile this as a module, you can still override this
-	  value using the module parameters.
-
-config CFAG12864B
-	tristate "CFAG12864B LCD"
-	depends on X86
-	depends on FB
-	depends on KS0108
-	select FB_SYSMEM_HELPERS
-	default n
-	help
-	  If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
-	  say Y. You also need the ks0108 LCD Controller driver.
-
-	  For help about how to wire your LCD to the parallel port,
-	  check Documentation/admin-guide/auxdisplay/cfag12864b.rst
-
-	  Depends on the x86 arch and the framebuffer support.
-
-	  The LCD framebuffer driver can be attached to a console.
-	  It will work fine. However, you can't attach it to the fbdev driver
-	  of the xorg server.
-
-	  To compile this as a module, choose M here:
-	  the modules will be called cfag12864b and cfag12864bfb.
-
-	  If unsure, say N.
-
-config CFAG12864B_RATE
-	int "Refresh rate (hertz)"
-	depends on CFAG12864B
-	default "20"
-	help
-	  Refresh rate of the LCD.
-
-	  As the LCD is not memory mapped, the driver has to make the work by
-	  software. This means you should be careful setting this value higher.
-	  If your CPUs are really slow or you feel the system is slowed down,
-	  decrease the value.
-
-	  Be careful modifying this value to a very high value:
-	  You can freeze the computer, or the LCD maybe can't draw as fast as you
-	  are requesting.
-
-	  If you don't know what I'm talking about, ignore it.
-
-	  If you compile this as a module, you can still override this
-	  value using the module parameters.
-
-config IMG_ASCII_LCD
-	tristate "Imagination Technologies ASCII LCD Display"
-	depends on HAS_IOMEM
-	default y if MIPS_MALTA
-	select MFD_SYSCON
-	select LINEDISP
-	help
-	  Enable this to support the simple ASCII LCD displays found on
-	  development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
-	  from Imagination Technologies.
-
-config HT16K33
-	tristate "Holtek Ht16K33 LED controller with keyscan"
-	depends on FB && I2C && INPUT
-	select FB_SYSMEM_HELPERS
-	select INPUT_MATRIXKMAP
-	select FB_BACKLIGHT
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LINEDISP
-	help
-	  Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
-	  LED controller driver with keyscan.
-
 config LCD2S
 	tristate "lcd2s 20x4 character display over I2C console"
 	depends on I2C
@@ -187,16 +59,6 @@ config LCD2S
 	  is a simple single color character display. You have to connect it
 	  to an I2C bus.
 
-config ARM_CHARLCD
-	bool "ARM Ltd. Character LCD Driver"
-	depends on PLAT_VERSATILE
-	help
-	  This is a driver for the character LCD found on the ARM Ltd.
-	  Versatile and RealView Platform Baseboards. It doesn't do
-	  very much more than display the text "ARM Linux" on the first
-	  line and the Linux version on the second line, but that's
-	  still useful.
-
 menuconfig PARPORT_PANEL
 	tristate "Parallel port LCD/Keypad Panel support"
 	depends on PARPORT
@@ -455,7 +317,6 @@ endif # PARPORT_PANEL
 config PANEL_CHANGE_MESSAGE
 	bool "Change LCD initialization message ?"
 	depends on CHARLCD
-	default "n"
 	help
 	  This allows you to replace the boot message indicating the kernel version
 	  and the driver version with a custom message. This is useful on appliances
@@ -504,8 +365,184 @@ choice
 
 endchoice
 
+#
+# Samsung KS0108 LCD controller section
+#
+config KS0108
+	tristate "KS0108 LCD Controller"
+	depends on PARPORT_PC
+	help
+	  If you have a LCD controlled by one or more KS0108
+	  controllers, say Y. You will need also another more specific
+	  driver for your LCD.
+
+	  Depends on Parallel Port support. If you say Y at
+	  parport, you will be able to compile this as a module (M)
+	  and built-in as well (Y).
+
+	  To compile this as a module, choose M here:
+	  the module will be called ks0108.
+
+	  If unsure, say N.
+
+config KS0108_PORT
+	hex "Parallel port where the LCD is connected"
+	depends on KS0108
+	default 0x378
+	help
+	  The address of the parallel port where the LCD is connected.
+
+	  The first  standard parallel port address is 0x378.
+	  The second standard parallel port address is 0x278.
+	  The third  standard parallel port address is 0x3BC.
+
+	  You can specify a different address if you need.
+
+	  If you don't know what I'm talking about, load the parport module,
+	  and execute "dmesg" or "cat /proc/ioports". You can see there how
+	  many parallel ports are present and which address each one has.
+
+	  Usually you only need to use 0x378.
+
+	  If you compile this as a module, you can still override this
+	  using the module parameters.
+
+config KS0108_DELAY
+	int "Delay between each control writing (microseconds)"
+	depends on KS0108
+	default "2"
+	help
+	  Amount of time the ks0108 should wait between each control write
+	  to the parallel port.
+
+	  If your LCD seems to miss random writings, increment this.
+
+	  If you don't know what I'm talking about, ignore it.
+
+	  If you compile this as a module, you can still override this
+	  value using the module parameters.
+
+config CFAG12864B
+	tristate "CFAG12864B LCD"
+	depends on X86
+	depends on FB
+	depends on KS0108
+	select FB_SYSMEM_HELPERS
+	help
+	  If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
+	  say Y. You also need the ks0108 LCD Controller driver.
+
+	  For help about how to wire your LCD to the parallel port,
+	  check Documentation/admin-guide/auxdisplay/cfag12864b.rst
+
+	  Depends on the x86 arch and the framebuffer support.
+
+	  The LCD framebuffer driver can be attached to a console.
+	  It will work fine. However, you can't attach it to the fbdev driver
+	  of the xorg server.
+
+	  To compile this as a module, choose M here:
+	  the modules will be called cfag12864b and cfag12864bfb.
+
+	  If unsure, say N.
+
+config CFAG12864B_RATE
+	int "Refresh rate (hertz)"
+	depends on CFAG12864B
+	default "20"
+	help
+	  Refresh rate of the LCD.
+
+	  As the LCD is not memory mapped, the driver has to make the work by
+	  software. This means you should be careful setting this value higher.
+	  If your CPUs are really slow or you feel the system is slowed down,
+	  decrease the value.
+
+	  Be careful modifying this value to a very high value:
+	  You can freeze the computer, or the LCD maybe can't draw as fast as you
+	  are requesting.
+
+	  If you don't know what I'm talking about, ignore it.
+
+	  If you compile this as a module, you can still override this
+	  value using the module parameters.
+
+#
+# Single character line display section
+#
+config LINEDISP
+	tristate "Character line display core support" if COMPILE_TEST
+	help
+	  This is the core support for single-line character displays, to be
+	  selected by drivers that use it.
+
+config IMG_ASCII_LCD
+	tristate "Imagination Technologies ASCII LCD Display"
+	depends on HAS_IOMEM
+	default y if MIPS_MALTA
+	select MFD_SYSCON
+	select LINEDISP
+	help
+	  Enable this to support the simple ASCII LCD displays found on
+	  development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
+	  from Imagination Technologies.
+
+config HT16K33
+	tristate "Holtek Ht16K33 LED controller with keyscan"
+	depends on FB && I2C && INPUT
+	select FB_SYSMEM_HELPERS
+	select INPUT_MATRIXKMAP
+	select FB_BACKLIGHT
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LINEDISP
+	help
+	  Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
+	  LED controller driver with keyscan.
+
+config MAX6959
+	tristate "Maxim MAX6958/6959 7-segment LED controller"
+	depends on I2C
+	select REGMAP_I2C
+	select LINEDISP
+	help
+	  If you say yes here you get support for the following Maxim chips
+	  (I2C 7-segment LED display controller):
+	  - MAX6958
+	  - MAX6959 (input support)
+
+	  This driver can also be built as a module. If so, the module
+	  will be called max6959.
+
+config SEG_LED_GPIO
+	tristate "Generic 7-segment LED display"
+	depends on GPIOLIB || COMPILE_TEST
+	select LINEDISP
+	help
+	  This driver supports a generic 7-segment LED display made up
+	  of GPIO pins connected to the individual segments.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called seg-led-gpio.
+
+#
+# Character LCD with non-conforming interface section
+#
+config ARM_CHARLCD
+	bool "ARM Ltd. Character LCD Driver"
+	depends on PLAT_VERSATILE
+	help
+	  This is a driver for the character LCD found on the ARM Ltd.
+	  Versatile and RealView Platform Baseboards. It doesn't do
+	  very much more than display the text "ARM Linux" on the first
+	  line and the Linux version on the second line, but that's
+	  still useful.
+
 endif # AUXDISPLAY
 
+#
+# Deprecated options
+#
 config PANEL
 	tristate "Parallel port LCD/Keypad Panel support (OLD OPTION)"
 	depends on PARPORT
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 6968ed4d3f..f5c13ed1cd 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -3,14 +3,16 @@
 # Makefile for the kernel auxiliary displays device drivers.
 #
 
-obj-$(CONFIG_CHARLCD)		+= charlcd.o
-obj-$(CONFIG_HD44780_COMMON)	+= hd44780_common.o
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
-obj-$(CONFIG_KS0108)		+= ks0108.o
 obj-$(CONFIG_CFAG12864B)	+= cfag12864b.o cfag12864bfb.o
-obj-$(CONFIG_IMG_ASCII_LCD)	+= img-ascii-lcd.o
+obj-$(CONFIG_CHARLCD)		+= charlcd.o
+obj-$(CONFIG_HD44780_COMMON)	+= hd44780_common.o
 obj-$(CONFIG_HD44780)		+= hd44780.o
 obj-$(CONFIG_HT16K33)		+= ht16k33.o
-obj-$(CONFIG_PARPORT_PANEL)	+= panel.o
+obj-$(CONFIG_IMG_ASCII_LCD)	+= img-ascii-lcd.o
+obj-$(CONFIG_KS0108)		+= ks0108.o
 obj-$(CONFIG_LCD2S)		+= lcd2s.o
 obj-$(CONFIG_LINEDISP)		+= line-display.o
+obj-$(CONFIG_MAX6959)		+= max6959.o
+obj-$(CONFIG_PARPORT_PANEL)	+= panel.o
+obj-$(CONFIG_SEG_LED_GPIO)	+= seg-led-gpio.o
diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c
index 5ba19c339f..2b74dabe7e 100644
--- a/drivers/auxdisplay/cfag12864bfb.c
+++ b/drivers/auxdisplay/cfag12864bfb.c
@@ -96,7 +96,7 @@ none:
 	return ret;
 }
 
-static int cfag12864bfb_remove(struct platform_device *device)
+static void cfag12864bfb_remove(struct platform_device *device)
 {
 	struct fb_info *info = platform_get_drvdata(device);
 
@@ -104,13 +104,11 @@ static int cfag12864bfb_remove(struct platform_device *device)
 		unregister_framebuffer(info);
 		framebuffer_release(info);
 	}
-
-	return 0;
 }
 
 static struct platform_driver cfag12864bfb_driver = {
 	.probe	= cfag12864bfb_probe,
-	.remove = cfag12864bfb_remove,
+	.remove_new = cfag12864bfb_remove,
 	.driver = {
 		.name	= CFAG12864BFB_NAME,
 	},
diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c
index 6d309e4971..bb94638144 100644
--- a/drivers/auxdisplay/charlcd.c
+++ b/drivers/auxdisplay/charlcd.c
@@ -17,7 +17,9 @@
 #include <linux/uaccess.h>
 #include <linux/workqueue.h>
 
+#ifndef CONFIG_PANEL_BOOT_MESSAGE
 #include <generated/utsrelease.h>
+#endif
 
 #include "charlcd.h"
 
@@ -678,4 +680,5 @@ int charlcd_unregister(struct charlcd *lcd)
 }
 EXPORT_SYMBOL_GPL(charlcd_unregister);
 
+MODULE_DESCRIPTION("Character LCD core support");
 MODULE_LICENSE("GPL");
diff --git a/drivers/auxdisplay/hd44780.c b/drivers/auxdisplay/hd44780.c
index d56a5d508c..7ac0b1b1d5 100644
--- a/drivers/auxdisplay/hd44780.c
+++ b/drivers/auxdisplay/hd44780.c
@@ -319,7 +319,7 @@ fail1:
 	return ret;
 }
 
-static int hd44780_remove(struct platform_device *pdev)
+static void hd44780_remove(struct platform_device *pdev)
 {
 	struct charlcd *lcd = platform_get_drvdata(pdev);
 	struct hd44780_common *hdc = lcd->drvdata;
@@ -329,7 +329,6 @@ static int hd44780_remove(struct platform_device *pdev)
 	kfree(lcd->drvdata);
 
 	kfree(lcd);
-	return 0;
 }
 
 static const struct of_device_id hd44780_of_match[] = {
@@ -340,7 +339,7 @@ MODULE_DEVICE_TABLE(of, hd44780_of_match);
 
 static struct platform_driver hd44780_driver = {
 	.probe = hd44780_probe,
-	.remove = hd44780_remove,
+	.remove_new = hd44780_remove,
 	.driver		= {
 		.name	= "hd44780",
 		.of_match_table = hd44780_of_match,
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
index a90430b7d0..96acfb2b58 100644
--- a/drivers/auxdisplay/ht16k33.c
+++ b/drivers/auxdisplay/ht16k33.c
@@ -15,6 +15,7 @@
 #include <linux/property.h>
 #include <linux/fb.h>
 #include <linux/backlight.h>
+#include <linux/container_of.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
@@ -85,16 +86,6 @@ struct ht16k33_fbdev {
 	uint8_t *cache;
 };
 
-struct ht16k33_seg {
-	struct linedisp linedisp;
-	union {
-		struct seg7_conversion_map seg7;
-		struct seg14_conversion_map seg14;
-	} map;
-	unsigned int map_size;
-	char curr[4];
-};
-
 struct ht16k33_priv {
 	struct i2c_client *client;
 	struct delayed_work work;
@@ -102,12 +93,21 @@ struct ht16k33_priv {
 	struct ht16k33_keypad keypad;
 	union {
 		struct ht16k33_fbdev fbdev;
-		struct ht16k33_seg seg;
+		struct linedisp linedisp;
 	};
 	enum display_type type;
 	uint8_t blink;
 };
 
+#define ht16k33_work_to_priv(p)				\
+	container_of(p, struct ht16k33_priv, work.work)
+
+#define ht16k33_led_to_priv(p)				\
+	container_of(p, struct ht16k33_priv, led)
+
+#define ht16k33_linedisp_to_priv(p)			\
+	container_of(p, struct ht16k33_priv, linedisp)
+
 static const struct fb_fix_screeninfo ht16k33_fb_fix = {
 	.id		= DRIVER_NAME,
 	.type		= FB_TYPE_PACKED_PIXELS,
@@ -135,33 +135,6 @@ static const struct fb_var_screeninfo ht16k33_fb_var = {
 	.vmode = FB_VMODE_NONINTERLACED,
 };
 
-static const SEG7_DEFAULT_MAP(initial_map_seg7);
-static const SEG14_DEFAULT_MAP(initial_map_seg14);
-
-static ssize_t map_seg_show(struct device *dev, struct device_attribute *attr,
-			    char *buf)
-{
-	struct ht16k33_priv *priv = dev_get_drvdata(dev);
-
-	memcpy(buf, &priv->seg.map, priv->seg.map_size);
-	return priv->seg.map_size;
-}
-
-static ssize_t map_seg_store(struct device *dev, struct device_attribute *attr,
-			     const char *buf, size_t cnt)
-{
-	struct ht16k33_priv *priv = dev_get_drvdata(dev);
-
-	if (cnt != priv->seg.map_size)
-		return -EINVAL;
-
-	memcpy(&priv->seg.map, buf, cnt);
-	return cnt;
-}
-
-static DEVICE_ATTR(map_seg7, 0644, map_seg_show, map_seg_store);
-static DEVICE_ATTR(map_seg14, 0644, map_seg_show, map_seg_store);
-
 static int ht16k33_display_on(struct ht16k33_priv *priv)
 {
 	uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON | priv->blink;
@@ -195,8 +168,7 @@ static int ht16k33_brightness_set(struct ht16k33_priv *priv,
 static int ht16k33_brightness_set_blocking(struct led_classdev *led_cdev,
 					   enum led_brightness brightness)
 {
-	struct ht16k33_priv *priv = container_of(led_cdev, struct ht16k33_priv,
-						 led);
+	struct ht16k33_priv *priv = ht16k33_led_to_priv(led_cdev);
 
 	return ht16k33_brightness_set(priv, brightness);
 }
@@ -204,8 +176,7 @@ static int ht16k33_brightness_set_blocking(struct led_classdev *led_cdev,
 static int ht16k33_blink_set(struct led_classdev *led_cdev,
 			     unsigned long *delay_on, unsigned long *delay_off)
 {
-	struct ht16k33_priv *priv = container_of(led_cdev, struct ht16k33_priv,
-						 led);
+	struct ht16k33_priv *priv = ht16k33_led_to_priv(led_cdev);
 	unsigned int delay;
 	uint8_t blink;
 	int err;
@@ -247,8 +218,7 @@ static void ht16k33_fb_queue(struct ht16k33_priv *priv)
  */
 static void ht16k33_fb_update(struct work_struct *work)
 {
-	struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
-						 work.work);
+	struct ht16k33_priv *priv = ht16k33_work_to_priv(work);
 	struct ht16k33_fbdev *fbdev = &priv->fbdev;
 
 	uint8_t *p1, *p2;
@@ -440,51 +410,71 @@ static void ht16k33_keypad_stop(struct input_dev *dev)
 	disable_irq(keypad->client->irq);
 }
 
-static void ht16k33_linedisp_update(struct linedisp *linedisp)
-{
-	struct ht16k33_priv *priv = container_of(linedisp, struct ht16k33_priv,
-						 seg.linedisp);
-
-	schedule_delayed_work(&priv->work, 0);
-}
-
 static void ht16k33_seg7_update(struct work_struct *work)
 {
-	struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
-						 work.work);
-	struct ht16k33_seg *seg = &priv->seg;
-	char *s = seg->curr;
+	struct ht16k33_priv *priv = ht16k33_work_to_priv(work);
+	struct linedisp_map *map = priv->linedisp.map;
+	char *s = priv->linedisp.buf;
 	uint8_t buf[9];
 
-	buf[0] = map_to_seg7(&seg->map.seg7, *s++);
+	buf[0] = map_to_seg7(&map->map.seg7, *s++);
 	buf[1] = 0;
-	buf[2] = map_to_seg7(&seg->map.seg7, *s++);
+	buf[2] = map_to_seg7(&map->map.seg7, *s++);
 	buf[3] = 0;
 	buf[4] = 0;
 	buf[5] = 0;
-	buf[6] = map_to_seg7(&seg->map.seg7, *s++);
+	buf[6] = map_to_seg7(&map->map.seg7, *s++);
 	buf[7] = 0;
-	buf[8] = map_to_seg7(&seg->map.seg7, *s++);
+	buf[8] = map_to_seg7(&map->map.seg7, *s++);
 
 	i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
 }
 
 static void ht16k33_seg14_update(struct work_struct *work)
 {
-	struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
-						 work.work);
-	struct ht16k33_seg *seg = &priv->seg;
-	char *s = seg->curr;
+	struct ht16k33_priv *priv = ht16k33_work_to_priv(work);
+	struct linedisp_map *map = priv->linedisp.map;
+	char *s = priv->linedisp.buf;
 	uint8_t buf[8];
 
-	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf);
-	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 2);
-	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 4);
-	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 6);
+	put_unaligned_le16(map_to_seg14(&map->map.seg14, *s++), buf + 0);
+	put_unaligned_le16(map_to_seg14(&map->map.seg14, *s++), buf + 2);
+	put_unaligned_le16(map_to_seg14(&map->map.seg14, *s++), buf + 4);
+	put_unaligned_le16(map_to_seg14(&map->map.seg14, *s++), buf + 6);
 
 	i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
 }
 
+static int ht16k33_linedisp_get_map_type(struct linedisp *linedisp)
+{
+	struct ht16k33_priv *priv = ht16k33_linedisp_to_priv(linedisp);
+
+	switch (priv->type) {
+	case DISP_QUAD_7SEG:
+		INIT_DELAYED_WORK(&priv->work, ht16k33_seg7_update);
+		return LINEDISP_MAP_SEG7;
+
+	case DISP_QUAD_14SEG:
+		INIT_DELAYED_WORK(&priv->work, ht16k33_seg14_update);
+		return LINEDISP_MAP_SEG14;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static void ht16k33_linedisp_update(struct linedisp *linedisp)
+{
+	struct ht16k33_priv *priv = ht16k33_linedisp_to_priv(linedisp);
+
+	schedule_delayed_work(&priv->work, 0);
+}
+
+static const struct linedisp_ops ht16k33_linedisp_ops = {
+	.get_map_type = ht16k33_linedisp_get_map_type,
+	.update = ht16k33_linedisp_update,
+};
+
 static int ht16k33_led_probe(struct device *dev, struct led_classdev *led,
 			     unsigned int brightness)
 {
@@ -666,47 +656,14 @@ err_fbdev_buffer:
 static int ht16k33_seg_probe(struct device *dev, struct ht16k33_priv *priv,
 			     uint32_t brightness)
 {
-	struct ht16k33_seg *seg = &priv->seg;
+	struct linedisp *linedisp = &priv->linedisp;
 	int err;
 
 	err = ht16k33_brightness_set(priv, brightness);
 	if (err)
 		return err;
 
-	switch (priv->type) {
-	case DISP_MATRIX:
-		/* not handled here */
-		err = -EINVAL;
-		break;
-
-	case DISP_QUAD_7SEG:
-		INIT_DELAYED_WORK(&priv->work, ht16k33_seg7_update);
-		seg->map.seg7 = initial_map_seg7;
-		seg->map_size = sizeof(seg->map.seg7);
-		err = device_create_file(dev, &dev_attr_map_seg7);
-		break;
-
-	case DISP_QUAD_14SEG:
-		INIT_DELAYED_WORK(&priv->work, ht16k33_seg14_update);
-		seg->map.seg14 = initial_map_seg14;
-		seg->map_size = sizeof(seg->map.seg14);
-		err = device_create_file(dev, &dev_attr_map_seg14);
-		break;
-	}
-	if (err)
-		return err;
-
-	err = linedisp_register(&seg->linedisp, dev, 4, seg->curr,
-				ht16k33_linedisp_update);
-	if (err)
-		goto err_remove_map_file;
-
-	return 0;
-
-err_remove_map_file:
-	device_remove_file(dev, &dev_attr_map_seg7);
-	device_remove_file(dev, &dev_attr_map_seg14);
-	return err;
+	return linedisp_register(linedisp, dev, 4, &ht16k33_linedisp_ops);
 }
 
 static int ht16k33_probe(struct i2c_client *client)
@@ -770,6 +727,9 @@ static int ht16k33_probe(struct i2c_client *client)
 		/* Segment Display */
 		err = ht16k33_seg_probe(dev, priv, dft_brightness);
 		break;
+
+	default:
+		return -EINVAL;
 	}
 	return err;
 }
@@ -790,9 +750,10 @@ static void ht16k33_remove(struct i2c_client *client)
 
 	case DISP_QUAD_7SEG:
 	case DISP_QUAD_14SEG:
-		linedisp_unregister(&priv->seg.linedisp);
-		device_remove_file(&client->dev, &dev_attr_map_seg7);
-		device_remove_file(&client->dev, &dev_attr_map_seg14);
+		linedisp_unregister(&priv->linedisp);
+		break;
+
+	default:
 		break;
 	}
 }
@@ -831,4 +792,5 @@ module_i2c_driver(ht16k33_driver);
 
 MODULE_DESCRIPTION("Holtek HT16K33 driver");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(LINEDISP);
 MODULE_AUTHOR("Robin van der Gracht <robin@protonic.nl>");
diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c
index 56efda0740..9ba132dc61 100644
--- a/drivers/auxdisplay/img-ascii-lcd.c
+++ b/drivers/auxdisplay/img-ascii-lcd.c
@@ -22,32 +22,30 @@ struct img_ascii_lcd_ctx;
  * struct img_ascii_lcd_config - Configuration information about an LCD model
  * @num_chars: the number of characters the LCD can display
  * @external_regmap: true if registers are in a system controller, else false
- * @update: function called to update the LCD
+ * @ops: character line display operations
  */
 struct img_ascii_lcd_config {
 	unsigned int num_chars;
 	bool external_regmap;
-	void (*update)(struct linedisp *linedisp);
+	const struct linedisp_ops ops;
 };
 
 /**
  * struct img_ascii_lcd_ctx - Private data structure
+ * @linedisp: line display structure
  * @base: the base address of the LCD registers
  * @regmap: the regmap through which LCD registers are accessed
  * @offset: the offset within regmap to the start of the LCD registers
  * @cfg: pointer to the LCD model configuration
- * @linedisp: line display structure
- * @curr: the string currently displayed on the LCD
  */
 struct img_ascii_lcd_ctx {
+	struct linedisp linedisp;
 	union {
 		void __iomem *base;
 		struct regmap *regmap;
 	};
 	u32 offset;
 	const struct img_ascii_lcd_config *cfg;
-	struct linedisp linedisp;
-	char curr[] __aligned(8);
 };
 
 /*
@@ -61,12 +59,12 @@ static void boston_update(struct linedisp *linedisp)
 	ulong val;
 
 #if BITS_PER_LONG == 64
-	val = *((u64 *)&ctx->curr[0]);
+	val = *((u64 *)&linedisp->buf[0]);
 	__raw_writeq(val, ctx->base);
 #elif BITS_PER_LONG == 32
-	val = *((u32 *)&ctx->curr[0]);
+	val = *((u32 *)&linedisp->buf[0]);
 	__raw_writel(val, ctx->base);
-	val = *((u32 *)&ctx->curr[4]);
+	val = *((u32 *)&linedisp->buf[4]);
 	__raw_writel(val, ctx->base + 4);
 #else
 # error Not 32 or 64 bit
@@ -75,7 +73,9 @@ static void boston_update(struct linedisp *linedisp)
 
 static struct img_ascii_lcd_config boston_config = {
 	.num_chars = 8,
-	.update = boston_update,
+	.ops = {
+		.update = boston_update,
+	},
 };
 
 /*
@@ -91,7 +91,7 @@ static void malta_update(struct linedisp *linedisp)
 
 	for (i = 0; i < linedisp->num_chars; i++) {
 		err = regmap_write(ctx->regmap,
-				   ctx->offset + (i * 8), ctx->curr[i]);
+				   ctx->offset + (i * 8), linedisp->buf[i]);
 		if (err)
 			break;
 	}
@@ -103,7 +103,9 @@ static void malta_update(struct linedisp *linedisp)
 static struct img_ascii_lcd_config malta_config = {
 	.num_chars = 8,
 	.external_regmap = true,
-	.update = malta_update,
+	.ops = {
+		.update = malta_update,
+	},
 };
 
 /*
@@ -191,7 +193,7 @@ static void sead3_update(struct linedisp *linedisp)
 
 		err = regmap_write(ctx->regmap,
 				   ctx->offset + SEAD3_REG_LCD_DATA,
-				   ctx->curr[i]);
+				   linedisp->buf[i]);
 		if (err)
 			break;
 	}
@@ -203,7 +205,9 @@ static void sead3_update(struct linedisp *linedisp)
 static struct img_ascii_lcd_config sead3_config = {
 	.num_chars = 16,
 	.external_regmap = true,
-	.update = sead3_update,
+	.ops = {
+		.update = sead3_update,
+	},
 };
 
 static const struct of_device_id img_ascii_lcd_matches[] = {
@@ -230,7 +234,7 @@ static int img_ascii_lcd_probe(struct platform_device *pdev)
 	struct img_ascii_lcd_ctx *ctx;
 	int err;
 
-	ctx = devm_kzalloc(dev, sizeof(*ctx) + cfg->num_chars, GFP_KERNEL);
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
 
@@ -247,8 +251,7 @@ static int img_ascii_lcd_probe(struct platform_device *pdev)
 			return PTR_ERR(ctx->base);
 	}
 
-	err = linedisp_register(&ctx->linedisp, dev, cfg->num_chars, ctx->curr,
-				cfg->update);
+	err = linedisp_register(&ctx->linedisp, dev, cfg->num_chars, &cfg->ops);
 	if (err)
 		return err;
 
@@ -273,16 +276,13 @@ err_unregister:
  *
  * Remove an LCD display device, freeing private resources & ensuring that the
  * driver stops using the LCD display registers.
- *
- * Return: 0
  */
-static int img_ascii_lcd_remove(struct platform_device *pdev)
+static void img_ascii_lcd_remove(struct platform_device *pdev)
 {
 	struct img_ascii_lcd_ctx *ctx = platform_get_drvdata(pdev);
 
 	sysfs_remove_link(&pdev->dev.kobj, "message");
 	linedisp_unregister(&ctx->linedisp);
-	return 0;
 }
 
 static struct platform_driver img_ascii_lcd_driver = {
@@ -291,10 +291,11 @@ static struct platform_driver img_ascii_lcd_driver = {
 		.of_match_table	= img_ascii_lcd_matches,
 	},
 	.probe	= img_ascii_lcd_probe,
-	.remove	= img_ascii_lcd_remove,
+	.remove_new = img_ascii_lcd_remove,
 };
 module_platform_driver(img_ascii_lcd_driver);
 
 MODULE_DESCRIPTION("Imagination Technologies ASCII LCD Display");
 MODULE_AUTHOR("Paul Burton <paul.burton@mips.com>");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(LINEDISP);
diff --git a/drivers/auxdisplay/line-display.c b/drivers/auxdisplay/line-display.c
index 03e7f104aa..e2b546210f 100644
--- a/drivers/auxdisplay/line-display.c
+++ b/drivers/auxdisplay/line-display.c
@@ -10,13 +10,21 @@
 
 #include <generated/utsrelease.h>
 
+#include <linux/container_of.h>
 #include <linux/device.h>
+#include <linux/export.h>
+#include <linux/idr.h>
+#include <linux/jiffies.h>
+#include <linux/kstrtox.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysfs.h>
 #include <linux/timer.h>
 
+#include <linux/map_to_7segment.h>
+#include <linux/map_to_14segment.h>
+
 #include "line-display.h"
 
 #define DEFAULT_SCROLL_RATE	(HZ / 2)
@@ -45,7 +53,7 @@ static void linedisp_scroll(struct timer_list *t)
 	}
 
 	/* update the display */
-	linedisp->update(linedisp);
+	linedisp->ops->update(linedisp);
 
 	/* move on to the next character */
 	linedisp->scroll_pos++;
@@ -89,7 +97,7 @@ static int linedisp_display(struct linedisp *linedisp, const char *msg,
 		linedisp->message = NULL;
 		linedisp->message_len = 0;
 		memset(linedisp->buf, ' ', linedisp->num_chars);
-		linedisp->update(linedisp);
+		linedisp->ops->update(linedisp);
 		return 0;
 	}
 
@@ -165,9 +173,11 @@ static ssize_t scroll_step_ms_store(struct device *dev,
 {
 	struct linedisp *linedisp = container_of(dev, struct linedisp, dev);
 	unsigned int ms;
+	int err;
 
-	if (kstrtouint(buf, 10, &ms) != 0)
-		return -EINVAL;
+	err = kstrtouint(buf, 10, &ms);
+	if (err)
+		return err;
 
 	linedisp->scroll_rate = msecs_to_jiffies(ms);
 	if (linedisp->message && linedisp->message_len > linedisp->num_chars) {
@@ -181,45 +191,165 @@ static ssize_t scroll_step_ms_store(struct device *dev,
 
 static DEVICE_ATTR_RW(scroll_step_ms);
 
+static ssize_t map_seg_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct linedisp *linedisp = container_of(dev, struct linedisp, dev);
+	struct linedisp_map *map = linedisp->map;
+
+	memcpy(buf, &map->map, map->size);
+	return map->size;
+}
+
+static ssize_t map_seg_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct linedisp *linedisp = container_of(dev, struct linedisp, dev);
+	struct linedisp_map *map = linedisp->map;
+
+	if (count != map->size)
+		return -EINVAL;
+
+	memcpy(&map->map, buf, count);
+	return count;
+}
+
+static const SEG7_DEFAULT_MAP(initial_map_seg7);
+static DEVICE_ATTR(map_seg7, 0644, map_seg_show, map_seg_store);
+
+static const SEG14_DEFAULT_MAP(initial_map_seg14);
+static DEVICE_ATTR(map_seg14, 0644, map_seg_show, map_seg_store);
+
 static struct attribute *linedisp_attrs[] = {
 	&dev_attr_message.attr,
 	&dev_attr_scroll_step_ms.attr,
-	NULL,
+	&dev_attr_map_seg7.attr,
+	&dev_attr_map_seg14.attr,
+	NULL
+};
+
+static umode_t linedisp_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct linedisp *linedisp = container_of(dev, struct linedisp, dev);
+	struct linedisp_map *map = linedisp->map;
+	umode_t mode = attr->mode;
+
+	if (attr == &dev_attr_map_seg7.attr) {
+		if (!map)
+			return 0;
+		if (map->type != LINEDISP_MAP_SEG7)
+			return 0;
+	}
+
+	if (attr == &dev_attr_map_seg14.attr) {
+		if (!map)
+			return 0;
+		if (map->type != LINEDISP_MAP_SEG14)
+			return 0;
+	}
+
+	return mode;
 };
-ATTRIBUTE_GROUPS(linedisp);
+
+static const struct attribute_group linedisp_group = {
+	.is_visible	= linedisp_attr_is_visible,
+	.attrs		= linedisp_attrs,
+};
+__ATTRIBUTE_GROUPS(linedisp);
+
+static DEFINE_IDA(linedisp_id);
+
+static void linedisp_release(struct device *dev)
+{
+	struct linedisp *linedisp = container_of(dev, struct linedisp, dev);
+
+	kfree(linedisp->map);
+	kfree(linedisp->message);
+	kfree(linedisp->buf);
+	ida_free(&linedisp_id, linedisp->id);
+}
 
 static const struct device_type linedisp_type = {
 	.groups	= linedisp_groups,
+	.release = linedisp_release,
 };
 
+static int linedisp_init_map(struct linedisp *linedisp)
+{
+	struct linedisp_map *map;
+	int err;
+
+	if (!linedisp->ops->get_map_type)
+		return 0;
+
+	err = linedisp->ops->get_map_type(linedisp);
+	if (err < 0)
+		return err;
+
+	map = kmalloc(sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	map->type = err;
+
+	/* assign initial mapping */
+	switch (map->type) {
+	case LINEDISP_MAP_SEG7:
+		map->map.seg7 = initial_map_seg7;
+		map->size = sizeof(map->map.seg7);
+		break;
+	case LINEDISP_MAP_SEG14:
+		map->map.seg14 = initial_map_seg14;
+		map->size = sizeof(map->map.seg14);
+		break;
+	default:
+		kfree(map);
+		return -EINVAL;
+	}
+
+	linedisp->map = map;
+
+	return 0;
+}
+
 /**
  * linedisp_register - register a character line display
  * @linedisp: pointer to character line display structure
  * @parent: parent device
  * @num_chars: the number of characters that can be displayed
- * @buf: pointer to a buffer that can hold @num_chars characters
- * @update: Function called to update the display.  This must not sleep!
+ * @ops: character line display operations
  *
  * Return: zero on success, else a negative error code.
  */
 int linedisp_register(struct linedisp *linedisp, struct device *parent,
-		      unsigned int num_chars, char *buf,
-		      void (*update)(struct linedisp *linedisp))
+		      unsigned int num_chars, const struct linedisp_ops *ops)
 {
-	static atomic_t linedisp_id = ATOMIC_INIT(-1);
 	int err;
 
 	memset(linedisp, 0, sizeof(*linedisp));
 	linedisp->dev.parent = parent;
 	linedisp->dev.type = &linedisp_type;
-	linedisp->update = update;
-	linedisp->buf = buf;
+	linedisp->ops = ops;
 	linedisp->num_chars = num_chars;
 	linedisp->scroll_rate = DEFAULT_SCROLL_RATE;
 
+	err = ida_alloc(&linedisp_id, GFP_KERNEL);
+	if (err < 0)
+		return err;
+	linedisp->id = err;
+
 	device_initialize(&linedisp->dev);
-	dev_set_name(&linedisp->dev, "linedisp.%lu",
-		     (unsigned long)atomic_inc_return(&linedisp_id));
+	dev_set_name(&linedisp->dev, "linedisp.%u", linedisp->id);
+
+	err = -ENOMEM;
+	linedisp->buf = kzalloc(linedisp->num_chars, GFP_KERNEL);
+	if (!linedisp->buf)
+		goto out_put_device;
+
+	/* initialise a character mapping, if required */
+	err = linedisp_init_map(linedisp);
+	if (err)
+		goto out_put_device;
 
 	/* initialise a timer for scrolling the message */
 	timer_setup(&linedisp->timer, linedisp_scroll, 0);
@@ -239,10 +369,11 @@ out_del_dev:
 	device_del(&linedisp->dev);
 out_del_timer:
 	del_timer_sync(&linedisp->timer);
+out_put_device:
 	put_device(&linedisp->dev);
 	return err;
 }
-EXPORT_SYMBOL_GPL(linedisp_register);
+EXPORT_SYMBOL_NS_GPL(linedisp_register, LINEDISP);
 
 /**
  * linedisp_unregister - unregister a character line display
@@ -253,9 +384,8 @@ void linedisp_unregister(struct linedisp *linedisp)
 {
 	device_del(&linedisp->dev);
 	del_timer_sync(&linedisp->timer);
-	kfree(linedisp->message);
 	put_device(&linedisp->dev);
 }
-EXPORT_SYMBOL_GPL(linedisp_unregister);
+EXPORT_SYMBOL_NS_GPL(linedisp_unregister, LINEDISP);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/auxdisplay/line-display.h b/drivers/auxdisplay/line-display.h
index 0f5891d34c..4348d7a2f6 100644
--- a/drivers/auxdisplay/line-display.h
+++ b/drivers/auxdisplay/line-display.h
@@ -11,33 +11,78 @@
 #ifndef _LINEDISP_H
 #define _LINEDISP_H
 
+#include <linux/device.h>
+#include <linux/timer_types.h>
+
+#include <linux/map_to_7segment.h>
+#include <linux/map_to_14segment.h>
+
+struct linedisp;
+
+/**
+ * enum linedisp_map_type - type of the character mapping
+ * @LINEDISP_MAP_SEG7: Map characters to 7 segment display
+ * @LINEDISP_MAP_SEG14: Map characters to 14 segment display
+ */
+enum linedisp_map_type {
+	LINEDISP_MAP_SEG7,
+	LINEDISP_MAP_SEG14,
+};
+
+/**
+ * struct linedisp_map - character mapping
+ * @type: type of the character mapping
+ * @map: conversion character mapping
+ * @size: size of the @map
+ */
+struct linedisp_map {
+	enum linedisp_map_type type;
+	union {
+		struct seg7_conversion_map seg7;
+		struct seg14_conversion_map seg14;
+	} map;
+	unsigned int size;
+};
+
+/**
+ * struct linedisp_ops - character line display operations
+ * @get_map_type: Function called to get the character mapping, if required
+ * @update: Function called to update the display. This must not sleep!
+ */
+struct linedisp_ops {
+	int (*get_map_type)(struct linedisp *linedisp);
+	void (*update)(struct linedisp *linedisp);
+};
+
 /**
  * struct linedisp - character line display private data structure
  * @dev: the line display device
  * @timer: timer used to implement scrolling
- * @update: function called to update the display
+ * @ops: character line display operations
  * @buf: pointer to the buffer for the string currently displayed
  * @message: the full message to display or scroll on the display
  * @num_chars: the number of characters that can be displayed
  * @message_len: the length of the @message string
  * @scroll_pos: index of the first character of @message currently displayed
  * @scroll_rate: scroll interval in jiffies
+ * @id: instance id of this display
  */
 struct linedisp {
 	struct device dev;
 	struct timer_list timer;
-	void (*update)(struct linedisp *linedisp);
+	const struct linedisp_ops *ops;
+	struct linedisp_map *map;
 	char *buf;
 	char *message;
 	unsigned int num_chars;
 	unsigned int message_len;
 	unsigned int scroll_pos;
 	unsigned int scroll_rate;
+	unsigned int id;
 };
 
 int linedisp_register(struct linedisp *linedisp, struct device *parent,
-		      unsigned int num_chars, char *buf,
-		      void (*update)(struct linedisp *linedisp));
+		      unsigned int num_chars, const struct linedisp_ops *ops);
 void linedisp_unregister(struct linedisp *linedisp);
 
 #endif /* LINEDISP_H */
diff --git a/drivers/auxdisplay/max6959.c b/drivers/auxdisplay/max6959.c
new file mode 100644
index 0000000000..5519c014bd
--- /dev/null
+++ b/drivers/auxdisplay/max6959.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MAX6958/6959 7-segment LED display controller
+ * Datasheet:
+ * https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6958-MAX6959.pdf
+ *
+ * Copyright (c) 2024, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+#include <linux/array_size.h>
+#include <linux/bitrev.h>
+#include <linux/bits.h>
+#include <linux/container_of.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/map_to_7segment.h>
+
+#include "line-display.h"
+
+/* Registers */
+#define REG_DECODE_MODE			0x01
+#define REG_INTENSITY			0x02
+#define REG_SCAN_LIMIT			0x03
+#define REG_CONFIGURATION		0x04
+#define REG_CONFIGURATION_S_BIT		BIT(0)
+
+#define REG_DIGIT(x)			(0x20 + (x))
+#define REG_DIGIT0			0x20
+#define REG_DIGIT1			0x21
+#define REG_DIGIT2			0x22
+#define REG_DIGIT3			0x23
+
+#define REG_SEGMENTS			0x24
+#define REG_MAX				REG_SEGMENTS
+
+struct max6959_priv {
+	struct linedisp linedisp;
+	struct delayed_work work;
+	struct regmap *regmap;
+};
+
+static void max6959_disp_update(struct work_struct *work)
+{
+	struct max6959_priv *priv = container_of(work, struct max6959_priv, work.work);
+	struct linedisp *linedisp = &priv->linedisp;
+	struct linedisp_map *map = linedisp->map;
+	char *s = linedisp->buf;
+	u8 buf[4];
+
+	/* Map segments according to datasheet */
+	buf[0] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[1] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[2] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[3] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+
+	regmap_bulk_write(priv->regmap, REG_DIGIT(0), buf, ARRAY_SIZE(buf));
+}
+
+static int max6959_linedisp_get_map_type(struct linedisp *linedisp)
+{
+	struct max6959_priv *priv = container_of(linedisp, struct max6959_priv, linedisp);
+
+	INIT_DELAYED_WORK(&priv->work, max6959_disp_update);
+	return LINEDISP_MAP_SEG7;
+}
+
+static void max6959_linedisp_update(struct linedisp *linedisp)
+{
+	struct max6959_priv *priv = container_of(linedisp, struct max6959_priv, linedisp);
+
+	schedule_delayed_work(&priv->work, 0);
+}
+
+static const struct linedisp_ops max6959_linedisp_ops = {
+	.get_map_type = max6959_linedisp_get_map_type,
+	.update = max6959_linedisp_update,
+};
+
+static int max6959_enable(struct max6959_priv *priv, bool enable)
+{
+	u8 mask = REG_CONFIGURATION_S_BIT;
+	u8 value = enable ? mask : 0;
+
+	return regmap_update_bits(priv->regmap, REG_CONFIGURATION, mask, value);
+}
+
+static void max6959_power_off(void *priv)
+{
+	max6959_enable(priv, false);
+}
+
+static int max6959_power_on(struct max6959_priv *priv)
+{
+	struct device *dev = regmap_get_device(priv->regmap);
+	int ret;
+
+	ret = max6959_enable(priv, true);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, max6959_power_off, priv);
+}
+
+static const struct regmap_config max6959_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = REG_MAX,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+static int max6959_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max6959_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(client, &max6959_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	ret = max6959_power_on(priv);
+	if (ret)
+		return ret;
+
+	ret = linedisp_register(&priv->linedisp, dev, 4, &max6959_linedisp_ops);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, priv);
+
+	return 0;
+}
+
+static void max6959_i2c_remove(struct i2c_client *client)
+{
+	struct max6959_priv *priv = i2c_get_clientdata(client);
+
+	cancel_delayed_work_sync(&priv->work);
+	linedisp_unregister(&priv->linedisp);
+}
+
+static int max6959_suspend(struct device *dev)
+{
+	return max6959_enable(dev_get_drvdata(dev), false);
+}
+
+static int max6959_resume(struct device *dev)
+{
+	return max6959_enable(dev_get_drvdata(dev), true);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(max6959_pm_ops, max6959_suspend, max6959_resume);
+
+static const struct i2c_device_id max6959_i2c_id[] = {
+	{ "max6959" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max6959_i2c_id);
+
+static const struct of_device_id max6959_of_table[] = {
+	{ .compatible = "maxim,max6959" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max6959_of_table);
+
+static struct i2c_driver max6959_i2c_driver = {
+	.driver = {
+		.name = "max6959",
+		.pm = pm_sleep_ptr(&max6959_pm_ops),
+		.of_match_table = max6959_of_table,
+	},
+	.probe = max6959_i2c_probe,
+	.remove = max6959_i2c_remove,
+	.id_table = max6959_i2c_id,
+};
+module_i2c_driver(max6959_i2c_driver);
+
+MODULE_DESCRIPTION("MAX6958/6959 7-segment LED controller");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(LINEDISP);
diff --git a/drivers/auxdisplay/panel.c b/drivers/auxdisplay/panel.c
index e20d35bdf5..049ff443e7 100644
--- a/drivers/auxdisplay/panel.c
+++ b/drivers/auxdisplay/panel.c
@@ -1519,106 +1519,9 @@ static void keypad_init(void)
 
 static void panel_attach(struct parport *port)
 {
+	int selected_keypad_type = NOT_SET;
 	struct pardev_cb panel_cb;
 
-	if (port->number != parport)
-		return;
-
-	if (pprt) {
-		pr_err("%s: port->number=%d parport=%d, already registered!\n",
-		       __func__, port->number, parport);
-		return;
-	}
-
-	memset(&panel_cb, 0, sizeof(panel_cb));
-	panel_cb.private = &pprt;
-	/* panel_cb.flags = 0 should be PARPORT_DEV_EXCL? */
-
-	pprt = parport_register_dev_model(port, "panel", &panel_cb, 0);
-	if (!pprt) {
-		pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n",
-		       __func__, port->number, parport);
-		return;
-	}
-
-	if (parport_claim(pprt)) {
-		pr_err("could not claim access to parport%d. Aborting.\n",
-		       parport);
-		goto err_unreg_device;
-	}
-
-	/* must init LCD first, just in case an IRQ from the keypad is
-	 * generated at keypad init
-	 */
-	if (lcd.enabled) {
-		lcd_init();
-		if (!lcd.charlcd || charlcd_register(lcd.charlcd))
-			goto err_unreg_device;
-	}
-
-	if (keypad.enabled) {
-		keypad_init();
-		if (misc_register(&keypad_dev))
-			goto err_lcd_unreg;
-	}
-	return;
-
-err_lcd_unreg:
-	if (scan_timer.function)
-		del_timer_sync(&scan_timer);
-	if (lcd.enabled)
-		charlcd_unregister(lcd.charlcd);
-err_unreg_device:
-	kfree(lcd.charlcd);
-	lcd.charlcd = NULL;
-	parport_unregister_device(pprt);
-	pprt = NULL;
-}
-
-static void panel_detach(struct parport *port)
-{
-	if (port->number != parport)
-		return;
-
-	if (!pprt) {
-		pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n",
-		       __func__, port->number, parport);
-		return;
-	}
-	if (scan_timer.function)
-		del_timer_sync(&scan_timer);
-
-	if (keypad.enabled) {
-		misc_deregister(&keypad_dev);
-		keypad_initialized = 0;
-	}
-
-	if (lcd.enabled) {
-		charlcd_unregister(lcd.charlcd);
-		lcd.initialized = false;
-		kfree(lcd.charlcd->drvdata);
-		kfree(lcd.charlcd);
-		lcd.charlcd = NULL;
-	}
-
-	/* TODO: free all input signals */
-	parport_release(pprt);
-	parport_unregister_device(pprt);
-	pprt = NULL;
-}
-
-static struct parport_driver panel_driver = {
-	.name = "panel",
-	.match_port = panel_attach,
-	.detach = panel_detach,
-	.devmodel = true,
-};
-
-/* init function */
-static int __init panel_init_module(void)
-{
-	int selected_keypad_type = NOT_SET, err;
-
 	/* take care of an eventual profile */
 	switch (profile) {
 	case PANEL_PROFILE_CUSTOM:
@@ -1710,29 +1613,102 @@ static int __init panel_init_module(void)
 	if (!lcd.enabled && !keypad.enabled) {
 		/* no device enabled, let's exit */
 		pr_err("panel driver disabled.\n");
-		return -ENODEV;
+		return;
 	}
 
-	err = parport_register_driver(&panel_driver);
-	if (err) {
-		pr_err("could not register with parport. Aborting.\n");
-		return err;
+	if (port->number != parport)
+		return;
+
+	if (pprt) {
+		pr_err("%s: port->number=%d parport=%d, already registered!\n",
+		       __func__, port->number, parport);
+		return;
 	}
 
-	if (pprt)
-		pr_info("panel driver registered on parport%d (io=0x%lx).\n",
-			parport, pprt->port->base);
-	else
-		pr_info("panel driver not yet registered\n");
-	return 0;
+	memset(&panel_cb, 0, sizeof(panel_cb));
+	panel_cb.private = &pprt;
+	/* panel_cb.flags = 0 should be PARPORT_DEV_EXCL? */
+
+	pprt = parport_register_dev_model(port, "panel", &panel_cb, 0);
+	if (!pprt) {
+		pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n",
+		       __func__, port->number, parport);
+		return;
+	}
+
+	if (parport_claim(pprt)) {
+		pr_err("could not claim access to parport%d. Aborting.\n",
+		       parport);
+		goto err_unreg_device;
+	}
+
+	/* must init LCD first, just in case an IRQ from the keypad is
+	 * generated at keypad init
+	 */
+	if (lcd.enabled) {
+		lcd_init();
+		if (!lcd.charlcd || charlcd_register(lcd.charlcd))
+			goto err_unreg_device;
+	}
+
+	if (keypad.enabled) {
+		keypad_init();
+		if (misc_register(&keypad_dev))
+			goto err_lcd_unreg;
+	}
+	return;
+
+err_lcd_unreg:
+	if (scan_timer.function)
+		del_timer_sync(&scan_timer);
+	if (lcd.enabled)
+		charlcd_unregister(lcd.charlcd);
+err_unreg_device:
+	kfree(lcd.charlcd);
+	lcd.charlcd = NULL;
+	parport_unregister_device(pprt);
+	pprt = NULL;
 }
 
-static void __exit panel_cleanup_module(void)
+static void panel_detach(struct parport *port)
 {
-	parport_unregister_driver(&panel_driver);
+	if (port->number != parport)
+		return;
+
+	if (!pprt) {
+		pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n",
+		       __func__, port->number, parport);
+		return;
+	}
+	if (scan_timer.function)
+		del_timer_sync(&scan_timer);
+
+	if (keypad.enabled) {
+		misc_deregister(&keypad_dev);
+		keypad_initialized = 0;
+	}
+
+	if (lcd.enabled) {
+		charlcd_unregister(lcd.charlcd);
+		lcd.initialized = false;
+		kfree(lcd.charlcd->drvdata);
+		kfree(lcd.charlcd);
+		lcd.charlcd = NULL;
+	}
+
+	/* TODO: free all input signals */
+	parport_release(pprt);
+	parport_unregister_device(pprt);
+	pprt = NULL;
 }
 
-module_init(panel_init_module);
-module_exit(panel_cleanup_module);
+static struct parport_driver panel_driver = {
+	.name = "panel",
+	.match_port = panel_attach,
+	.detach = panel_detach,
+	.devmodel = true,
+};
+module_parport_driver(panel_driver);
+
 MODULE_AUTHOR("Willy Tarreau");
 MODULE_LICENSE("GPL");
diff --git a/drivers/auxdisplay/seg-led-gpio.c b/drivers/auxdisplay/seg-led-gpio.c
new file mode 100644
index 0000000000..183ab3011c
--- /dev/null
+++ b/drivers/auxdisplay/seg-led-gpio.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for a 7-segment LED display
+ *
+ * The decimal point LED present on some devices is currently not
+ * supported.
+ *
+ * Copyright (C) Allied Telesis Labs
+ */
+
+#include <linux/bitmap.h>
+#include <linux/container_of.h>
+#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/map_to_7segment.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "line-display.h"
+
+struct seg_led_priv {
+	struct linedisp linedisp;
+	struct delayed_work work;
+	struct gpio_descs *segment_gpios;
+};
+
+static void seg_led_update(struct work_struct *work)
+{
+	struct seg_led_priv *priv = container_of(work, struct seg_led_priv, work.work);
+	struct linedisp *linedisp = &priv->linedisp;
+	struct linedisp_map *map = linedisp->map;
+	DECLARE_BITMAP(values, 8) = { };
+
+	bitmap_set_value8(values, map_to_seg7(&map->map.seg7, linedisp->buf[0]), 0);
+
+	gpiod_set_array_value_cansleep(priv->segment_gpios->ndescs, priv->segment_gpios->desc,
+				       priv->segment_gpios->info, values);
+}
+
+static int seg_led_linedisp_get_map_type(struct linedisp *linedisp)
+{
+	struct seg_led_priv *priv = container_of(linedisp, struct seg_led_priv, linedisp);
+
+	INIT_DELAYED_WORK(&priv->work, seg_led_update);
+	return LINEDISP_MAP_SEG7;
+}
+
+static void seg_led_linedisp_update(struct linedisp *linedisp)
+{
+	struct seg_led_priv *priv = container_of(linedisp, struct seg_led_priv, linedisp);
+
+	schedule_delayed_work(&priv->work, 0);
+}
+
+static const struct linedisp_ops seg_led_linedisp_ops = {
+	.get_map_type = seg_led_linedisp_get_map_type,
+	.update = seg_led_linedisp_update,
+};
+
+static int seg_led_probe(struct platform_device *pdev)
+{
+	struct seg_led_priv *priv;
+	struct device *dev = &pdev->dev;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->segment_gpios = devm_gpiod_get_array(dev, "segment", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->segment_gpios))
+		return PTR_ERR(priv->segment_gpios);
+
+	if (priv->segment_gpios->ndescs < 7 || priv->segment_gpios->ndescs > 8)
+		return -EINVAL;
+
+	return linedisp_register(&priv->linedisp, dev, 1, &seg_led_linedisp_ops);
+}
+
+static void seg_led_remove(struct platform_device *pdev)
+{
+	struct seg_led_priv *priv = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&priv->work);
+	linedisp_unregister(&priv->linedisp);
+}
+
+static const struct of_device_id seg_led_of_match[] = {
+	{ .compatible = "gpio-7-segment"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, seg_led_of_match);
+
+static struct platform_driver seg_led_driver = {
+	.probe = seg_led_probe,
+	.remove_new = seg_led_remove,
+	.driver = {
+		.name = "seg-led-gpio",
+		.of_match_table = seg_led_of_match,
+	},
+};
+module_platform_driver(seg_led_driver);
+
+MODULE_AUTHOR("Chris Packham <chris.packham@alliedtelesis.co.nz>");
+MODULE_DESCRIPTION("7 segment LED driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(LINEDISP);