Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1143 insertions, 0 deletions

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
new file mode 100644
index 0000000000..45fd13ef13
--- /dev/null
+++ b/drivers/base/regmap/regmap-irq.c
@@ -0,0 +1,1143 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// regmap based irq_chip
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "internal.h"
+
+struct regmap_irq_chip_data {
+	struct mutex lock;
+	struct irq_chip irq_chip;
+
+	struct regmap *map;
+	const struct regmap_irq_chip *chip;
+
+	int irq_base;
+	struct irq_domain *domain;
+
+	int irq;
+	int wake_count;
+
+	void *status_reg_buf;
+	unsigned int *main_status_buf;
+	unsigned int *status_buf;
+	unsigned int *mask_buf;
+	unsigned int *mask_buf_def;
+	unsigned int *wake_buf;
+	unsigned int *type_buf;
+	unsigned int *type_buf_def;
+	unsigned int **config_buf;
+
+	unsigned int irq_reg_stride;
+
+	unsigned int (*get_irq_reg)(struct regmap_irq_chip_data *data,
+				    unsigned int base, int index);
+
+	unsigned int clear_status:1;
+};
+
+static inline const
+struct regmap_irq *irq_to_regmap_irq(struct regmap_irq_chip_data *data,
+				     int irq)
+{
+	return &data->chip->irqs[irq];
+}
+
+static bool regmap_irq_can_bulk_read_status(struct regmap_irq_chip_data *data)
+{
+	struct regmap *map = data->map;
+
+	/*
+	 * While possible that a user-defined ->get_irq_reg() callback might
+	 * be linear enough to support bulk reads, most of the time it won't.
+	 * Therefore only allow them if the default callback is being used.
+	 */
+	return data->irq_reg_stride == 1 && map->reg_stride == 1 &&
+	       data->get_irq_reg == regmap_irq_get_irq_reg_linear &&
+	       !map->use_single_read;
+}
+
+static void regmap_irq_lock(struct irq_data *data)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&d->lock);
+}
+
+static void regmap_irq_sync_unlock(struct irq_data *data)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+	struct regmap *map = d->map;
+	int i, j, ret;
+	u32 reg;
+	u32 val;
+
+	if (d->chip->runtime_pm) {
+		ret = pm_runtime_get_sync(map->dev);
+		if (ret < 0)
+			dev_err(map->dev, "IRQ sync failed to resume: %d\n",
+				ret);
+	}
+
+	if (d->clear_status) {
+		for (i = 0; i < d->chip->num_regs; i++) {
+			reg = d->get_irq_reg(d, d->chip->status_base, i);
+
+			ret = regmap_read(map, reg, &val);
+			if (ret)
+				dev_err(d->map->dev,
+					"Failed to clear the interrupt status bits\n");
+		}
+
+		d->clear_status = false;
+	}
+
+	/*
+	 * If there's been a change in the mask write it back to the
+	 * hardware.  We rely on the use of the regmap core cache to
+	 * suppress pointless writes.
+	 */
+	for (i = 0; i < d->chip->num_regs; i++) {
+		if (d->chip->handle_mask_sync)
+			d->chip->handle_mask_sync(i, d->mask_buf_def[i],
+						  d->mask_buf[i],
+						  d->chip->irq_drv_data);
+
+		if (d->chip->mask_base && !d->chip->handle_mask_sync) {
+			reg = d->get_irq_reg(d, d->chip->mask_base, i);
+			ret = regmap_update_bits(d->map, reg,
+						 d->mask_buf_def[i],
+						 d->mask_buf[i]);
+			if (ret)
+				dev_err(d->map->dev, "Failed to sync masks in %x\n", reg);
+		}
+
+		if (d->chip->unmask_base && !d->chip->handle_mask_sync) {
+			reg = d->get_irq_reg(d, d->chip->unmask_base, i);
+			ret = regmap_update_bits(d->map, reg,
+					d->mask_buf_def[i], ~d->mask_buf[i]);
+			if (ret)
+				dev_err(d->map->dev, "Failed to sync masks in %x\n",
+					reg);
+		}
+
+		reg = d->get_irq_reg(d, d->chip->wake_base, i);
+		if (d->wake_buf) {
+			if (d->chip->wake_invert)
+				ret = regmap_update_bits(d->map, reg,
+							 d->mask_buf_def[i],
+							 ~d->wake_buf[i]);
+			else
+				ret = regmap_update_bits(d->map, reg,
+							 d->mask_buf_def[i],
+							 d->wake_buf[i]);
+			if (ret != 0)
+				dev_err(d->map->dev,
+					"Failed to sync wakes in %x: %d\n",
+					reg, ret);
+		}
+
+		if (!d->chip->init_ack_masked)
+			continue;
+		/*
+		 * Ack all the masked interrupts unconditionally,
+		 * OR if there is masked interrupt which hasn't been Acked,
+		 * it'll be ignored in irq handler, then may introduce irq storm
+		 */
+		if (d->mask_buf[i] && (d->chip->ack_base || d->chip->use_ack)) {
+			reg = d->get_irq_reg(d, d->chip->ack_base, i);
+
+			/* some chips ack by write 0 */
+			if (d->chip->ack_invert)
+				ret = regmap_write(map, reg, ~d->mask_buf[i]);
+			else
+				ret = regmap_write(map, reg, d->mask_buf[i]);
+			if (d->chip->clear_ack) {
+				if (d->chip->ack_invert && !ret)
+					ret = regmap_write(map, reg, UINT_MAX);
+				else if (!ret)
+					ret = regmap_write(map, reg, 0);
+			}
+			if (ret != 0)
+				dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
+					reg, ret);
+		}
+	}
+
+	for (i = 0; i < d->chip->num_config_bases; i++) {
+		for (j = 0; j < d->chip->num_config_regs; j++) {
+			reg = d->get_irq_reg(d, d->chip->config_base[i], j);
+			ret = regmap_write(map, reg, d->config_buf[i][j]);
+			if (ret)
+				dev_err(d->map->dev,
+					"Failed to write config %x: %d\n",
+					reg, ret);
+		}
+	}
+
+	if (d->chip->runtime_pm)
+		pm_runtime_put(map->dev);
+
+	/* If we've changed our wakeup count propagate it to the parent */
+	if (d->wake_count < 0)
+		for (i = d->wake_count; i < 0; i++)
+			irq_set_irq_wake(d->irq, 0);
+	else if (d->wake_count > 0)
+		for (i = 0; i < d->wake_count; i++)
+			irq_set_irq_wake(d->irq, 1);
+
+	d->wake_count = 0;
+
+	mutex_unlock(&d->lock);
+}
+
+static void regmap_irq_enable(struct irq_data *data)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+	struct regmap *map = d->map;
+	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
+	unsigned int reg = irq_data->reg_offset / map->reg_stride;
+	unsigned int mask;
+
+	/*
+	 * The type_in_mask flag means that the underlying hardware uses
+	 * separate mask bits for each interrupt trigger type, but we want
+	 * to have a single logical interrupt with a configurable type.
+	 *
+	 * If the interrupt we're enabling defines any supported types
+	 * then instead of using the regular mask bits for this interrupt,
+	 * use the value previously written to the type buffer at the
+	 * corresponding offset in regmap_irq_set_type().
+	 */
+	if (d->chip->type_in_mask && irq_data->type.types_supported)
+		mask = d->type_buf[reg] & irq_data->mask;
+	else
+		mask = irq_data->mask;
+
+	if (d->chip->clear_on_unmask)
+		d->clear_status = true;
+
+	d->mask_buf[reg] &= ~mask;
+}
+
+static void regmap_irq_disable(struct irq_data *data)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+	struct regmap *map = d->map;
+	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
+
+	d->mask_buf[irq_data->reg_offset / map->reg_stride] |= irq_data->mask;
+}
+
+static int regmap_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+	struct regmap *map = d->map;
+	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
+	int reg, ret;
+	const struct regmap_irq_type *t = &irq_data->type;
+
+	if ((t->types_supported & type) != type)
+		return 0;
+
+	reg = t->type_reg_offset / map->reg_stride;
+
+	if (d->chip->type_in_mask) {
+		ret = regmap_irq_set_type_config_simple(&d->type_buf, type,
+							irq_data, reg, d->chip->irq_drv_data);
+		if (ret)
+			return ret;
+	}
+
+	if (d->chip->set_type_config) {
+		ret = d->chip->set_type_config(d->config_buf, type, irq_data,
+					       reg, d->chip->irq_drv_data);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int regmap_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
+	struct regmap *map = d->map;
+	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
+
+	if (on) {
+		if (d->wake_buf)
+			d->wake_buf[irq_data->reg_offset / map->reg_stride]
+				&= ~irq_data->mask;
+		d->wake_count++;
+	} else {
+		if (d->wake_buf)
+			d->wake_buf[irq_data->reg_offset / map->reg_stride]
+				|= irq_data->mask;
+		d->wake_count--;
+	}
+
+	return 0;
+}
+
+static const struct irq_chip regmap_irq_chip = {
+	.irq_bus_lock		= regmap_irq_lock,
+	.irq_bus_sync_unlock	= regmap_irq_sync_unlock,
+	.irq_disable		= regmap_irq_disable,
+	.irq_enable		= regmap_irq_enable,
+	.irq_set_type		= regmap_irq_set_type,
+	.irq_set_wake		= regmap_irq_set_wake,
+};
+
+static inline int read_sub_irq_data(struct regmap_irq_chip_data *data,
+					   unsigned int b)
+{
+	const struct regmap_irq_chip *chip = data->chip;
+	struct regmap *map = data->map;
+	struct regmap_irq_sub_irq_map *subreg;
+	unsigned int reg;
+	int i, ret = 0;
+
+	if (!chip->sub_reg_offsets) {
+		reg = data->get_irq_reg(data, chip->status_base, b);
+		ret = regmap_read(map, reg, &data->status_buf[b]);
+	} else {
+		/*
+		 * Note we can't use ->get_irq_reg() here because the offsets
+		 * in 'subreg' are *not* interchangeable with indices.
+		 */
+		subreg = &chip->sub_reg_offsets[b];
+		for (i = 0; i < subreg->num_regs; i++) {
+			unsigned int offset = subreg->offset[i];
+			unsigned int index = offset / map->reg_stride;
+
+			ret = regmap_read(map, chip->status_base + offset,
+					  &data->status_buf[index]);
+			if (ret)
+				break;
+		}
+	}
+	return ret;
+}
+
+static irqreturn_t regmap_irq_thread(int irq, void *d)
+{
+	struct regmap_irq_chip_data *data = d;
+	const struct regmap_irq_chip *chip = data->chip;
+	struct regmap *map = data->map;
+	int ret, i;
+	bool handled = false;
+	u32 reg;
+
+	if (chip->handle_pre_irq)
+		chip->handle_pre_irq(chip->irq_drv_data);
+
+	if (chip->runtime_pm) {
+		ret = pm_runtime_get_sync(map->dev);
+		if (ret < 0) {
+			dev_err(map->dev, "IRQ thread failed to resume: %d\n",
+				ret);
+			goto exit;
+		}
+	}
+
+	/*
+	 * Read only registers with active IRQs if the chip has 'main status
+	 * register'. Else read in the statuses, using a single bulk read if
+	 * possible in order to reduce the I/O overheads.
+	 */
+
+	if (chip->no_status) {
+		/* no status register so default to all active */
+		memset32(data->status_buf, GENMASK(31, 0), chip->num_regs);
+	} else if (chip->num_main_regs) {
+		unsigned int max_main_bits;
+		unsigned long size;
+
+		size = chip->num_regs * sizeof(unsigned int);
+
+		max_main_bits = (chip->num_main_status_bits) ?
+				 chip->num_main_status_bits : chip->num_regs;
+		/* Clear the status buf as we don't read all status regs */
+		memset(data->status_buf, 0, size);
+
+		/* We could support bulk read for main status registers
+		 * but I don't expect to see devices with really many main
+		 * status registers so let's only support single reads for the
+		 * sake of simplicity. and add bulk reads only if needed
+		 */
+		for (i = 0; i < chip->num_main_regs; i++) {
+			reg = data->get_irq_reg(data, chip->main_status, i);
+			ret = regmap_read(map, reg, &data->main_status_buf[i]);
+			if (ret) {
+				dev_err(map->dev,
+					"Failed to read IRQ status %d\n",
+					ret);
+				goto exit;
+			}
+		}
+
+		/* Read sub registers with active IRQs */
+		for (i = 0; i < chip->num_main_regs; i++) {
+			unsigned int b;
+			const unsigned long mreg = data->main_status_buf[i];
+
+			for_each_set_bit(b, &mreg, map->format.val_bytes * 8) {
+				if (i * map->format.val_bytes * 8 + b >
+				    max_main_bits)
+					break;
+				ret = read_sub_irq_data(data, b);
+
+				if (ret != 0) {
+					dev_err(map->dev,
+						"Failed to read IRQ status %d\n",
+						ret);
+					goto exit;
+				}
+			}
+
+		}
+	} else if (regmap_irq_can_bulk_read_status(data)) {
+
+		u8 *buf8 = data->status_reg_buf;
+		u16 *buf16 = data->status_reg_buf;
+		u32 *buf32 = data->status_reg_buf;
+
+		BUG_ON(!data->status_reg_buf);
+
+		ret = regmap_bulk_read(map, chip->status_base,
+				       data->status_reg_buf,
+				       chip->num_regs);
+		if (ret != 0) {
+			dev_err(map->dev, "Failed to read IRQ status: %d\n",
+				ret);
+			goto exit;
+		}
+
+		for (i = 0; i < data->chip->num_regs; i++) {
+			switch (map->format.val_bytes) {
+			case 1:
+				data->status_buf[i] = buf8[i];
+				break;
+			case 2:
+				data->status_buf[i] = buf16[i];
+				break;
+			case 4:
+				data->status_buf[i] = buf32[i];
+				break;
+			default:
+				BUG();
+				goto exit;
+			}
+		}
+
+	} else {
+		for (i = 0; i < data->chip->num_regs; i++) {
+			unsigned int reg = data->get_irq_reg(data,
+					data->chip->status_base, i);
+			ret = regmap_read(map, reg, &data->status_buf[i]);
+
+			if (ret != 0) {
+				dev_err(map->dev,
+					"Failed to read IRQ status: %d\n",
+					ret);
+				goto exit;
+			}
+		}
+	}
+
+	if (chip->status_invert)
+		for (i = 0; i < data->chip->num_regs; i++)
+			data->status_buf[i] = ~data->status_buf[i];
+
+	/*
+	 * Ignore masked IRQs and ack if we need to; we ack early so
+	 * there is no race between handling and acknowledging the
+	 * interrupt.  We assume that typically few of the interrupts
+	 * will fire simultaneously so don't worry about overhead from
+	 * doing a write per register.
+	 */
+	for (i = 0; i < data->chip->num_regs; i++) {
+		data->status_buf[i] &= ~data->mask_buf[i];
+
+		if (data->status_buf[i] && (chip->ack_base || chip->use_ack)) {
+			reg = data->get_irq_reg(data, data->chip->ack_base, i);
+
+			if (chip->ack_invert)
+				ret = regmap_write(map, reg,
+						~data->status_buf[i]);
+			else
+				ret = regmap_write(map, reg,
+						data->status_buf[i]);
+			if (chip->clear_ack) {
+				if (chip->ack_invert && !ret)
+					ret = regmap_write(map, reg, UINT_MAX);
+				else if (!ret)
+					ret = regmap_write(map, reg, 0);
+			}
+			if (ret != 0)
+				dev_err(map->dev, "Failed to ack 0x%x: %d\n",
+					reg, ret);
+		}
+	}
+
+	for (i = 0; i < chip->num_irqs; i++) {
+		if (data->status_buf[chip->irqs[i].reg_offset /
+				     map->reg_stride] & chip->irqs[i].mask) {
+			handle_nested_irq(irq_find_mapping(data->domain, i));
+			handled = true;
+		}
+	}
+
+exit:
+	if (chip->handle_post_irq)
+		chip->handle_post_irq(chip->irq_drv_data);
+
+	if (chip->runtime_pm)
+		pm_runtime_put(map->dev);
+
+	if (handled)
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
+}
+
+static int regmap_irq_map(struct irq_domain *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	struct regmap_irq_chip_data *data = h->host_data;
+
+	irq_set_chip_data(virq, data);
+	irq_set_chip(virq, &data->irq_chip);
+	irq_set_nested_thread(virq, 1);
+	irq_set_parent(virq, data->irq);
+	irq_set_noprobe(virq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops regmap_domain_ops = {
+	.map	= regmap_irq_map,
+	.xlate	= irq_domain_xlate_onetwocell,
+};
+
+/**
+ * regmap_irq_get_irq_reg_linear() - Linear IRQ register mapping callback.
+ * @data: Data for the &struct regmap_irq_chip
+ * @base: Base register
+ * @index: Register index
+ *
+ * Returns the register address corresponding to the given @base and @index
+ * by the formula ``base + index * regmap_stride * irq_reg_stride``.
+ */
+unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data,
+					   unsigned int base, int index)
+{
+	struct regmap *map = data->map;
+
+	return base + index * map->reg_stride * data->irq_reg_stride;
+}
+EXPORT_SYMBOL_GPL(regmap_irq_get_irq_reg_linear);
+
+/**
+ * regmap_irq_set_type_config_simple() - Simple IRQ type configuration callback.
+ * @buf: Buffer containing configuration register values, this is a 2D array of
+ *       `num_config_bases` rows, each of `num_config_regs` elements.
+ * @type: The requested IRQ type.
+ * @irq_data: The IRQ being configured.
+ * @idx: Index of the irq's config registers within each array `buf[i]`
+ * @irq_drv_data: Driver specific IRQ data
+ *
+ * This is a &struct regmap_irq_chip->set_type_config callback suitable for
+ * chips with one config register. Register values are updated according to
+ * the &struct regmap_irq_type data associated with an IRQ.
+ */
+int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type,
+				      const struct regmap_irq *irq_data,
+				      int idx, void *irq_drv_data)
+{
+	const struct regmap_irq_type *t = &irq_data->type;
+
+	if (t->type_reg_mask)
+		buf[0][idx] &= ~t->type_reg_mask;
+	else
+		buf[0][idx] &= ~(t->type_falling_val |
+				 t->type_rising_val |
+				 t->type_level_low_val |
+				 t->type_level_high_val);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_FALLING:
+		buf[0][idx] |= t->type_falling_val;
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		buf[0][idx] |= t->type_rising_val;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		buf[0][idx] |= (t->type_falling_val |
+				t->type_rising_val);
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		buf[0][idx] |= t->type_level_high_val;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		buf[0][idx] |= t->type_level_low_val;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(regmap_irq_set_type_config_simple);
+
+/**
+ * regmap_add_irq_chip_fwnode() - Use standard regmap IRQ controller handling
+ *
+ * @fwnode: The firmware node where the IRQ domain should be added to.
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts.
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success.
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * In order for this to be efficient the chip really should use a
+ * register cache.  The chip driver is responsible for restoring the
+ * register values used by the IRQ controller over suspend and resume.
+ */
+int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
+			       struct regmap *map, int irq,
+			       int irq_flags, int irq_base,
+			       const struct regmap_irq_chip *chip,
+			       struct regmap_irq_chip_data **data)
+{
+	struct regmap_irq_chip_data *d;
+	int i;
+	int ret = -ENOMEM;
+	u32 reg;
+
+	if (chip->num_regs <= 0)
+		return -EINVAL;
+
+	if (chip->clear_on_unmask && (chip->ack_base || chip->use_ack))
+		return -EINVAL;
+
+	if (chip->mask_base && chip->unmask_base && !chip->mask_unmask_non_inverted)
+		return -EINVAL;
+
+	for (i = 0; i < chip->num_irqs; i++) {
+		if (chip->irqs[i].reg_offset % map->reg_stride)
+			return -EINVAL;
+		if (chip->irqs[i].reg_offset / map->reg_stride >=
+		    chip->num_regs)
+			return -EINVAL;
+	}
+
+	if (irq_base) {
+		irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0);
+		if (irq_base < 0) {
+			dev_warn(map->dev, "Failed to allocate IRQs: %d\n",
+				 irq_base);
+			return irq_base;
+		}
+	}
+
+	d = kzalloc(sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	if (chip->num_main_regs) {
+		d->main_status_buf = kcalloc(chip->num_main_regs,
+					     sizeof(*d->main_status_buf),
+					     GFP_KERNEL);
+
+		if (!d->main_status_buf)
+			goto err_alloc;
+	}
+
+	d->status_buf = kcalloc(chip->num_regs, sizeof(*d->status_buf),
+				GFP_KERNEL);
+	if (!d->status_buf)
+		goto err_alloc;
+
+	d->mask_buf = kcalloc(chip->num_regs, sizeof(*d->mask_buf),
+			      GFP_KERNEL);
+	if (!d->mask_buf)
+		goto err_alloc;
+
+	d->mask_buf_def = kcalloc(chip->num_regs, sizeof(*d->mask_buf_def),
+				  GFP_KERNEL);
+	if (!d->mask_buf_def)
+		goto err_alloc;
+
+	if (chip->wake_base) {
+		d->wake_buf = kcalloc(chip->num_regs, sizeof(*d->wake_buf),
+				      GFP_KERNEL);
+		if (!d->wake_buf)
+			goto err_alloc;
+	}
+
+	if (chip->type_in_mask) {
+		d->type_buf_def = kcalloc(chip->num_regs,
+					  sizeof(*d->type_buf_def), GFP_KERNEL);
+		if (!d->type_buf_def)
+			goto err_alloc;
+
+		d->type_buf = kcalloc(chip->num_regs, sizeof(*d->type_buf), GFP_KERNEL);
+		if (!d->type_buf)
+			goto err_alloc;
+	}
+
+	if (chip->num_config_bases && chip->num_config_regs) {
+		/*
+		 * Create config_buf[num_config_bases][num_config_regs]
+		 */
+		d->config_buf = kcalloc(chip->num_config_bases,
+					sizeof(*d->config_buf), GFP_KERNEL);
+		if (!d->config_buf)
+			goto err_alloc;
+
+		for (i = 0; i < chip->num_config_bases; i++) {
+			d->config_buf[i] = kcalloc(chip->num_config_regs,
+						   sizeof(**d->config_buf),
+						   GFP_KERNEL);
+			if (!d->config_buf[i])
+				goto err_alloc;
+		}
+	}
+
+	d->irq_chip = regmap_irq_chip;
+	d->irq_chip.name = chip->name;
+	d->irq = irq;
+	d->map = map;
+	d->chip = chip;
+	d->irq_base = irq_base;
+
+	if (chip->irq_reg_stride)
+		d->irq_reg_stride = chip->irq_reg_stride;
+	else
+		d->irq_reg_stride = 1;
+
+	if (chip->get_irq_reg)
+		d->get_irq_reg = chip->get_irq_reg;
+	else
+		d->get_irq_reg = regmap_irq_get_irq_reg_linear;
+
+	if (regmap_irq_can_bulk_read_status(d)) {
+		d->status_reg_buf = kmalloc_array(chip->num_regs,
+						  map->format.val_bytes,
+						  GFP_KERNEL);
+		if (!d->status_reg_buf)
+			goto err_alloc;
+	}
+
+	mutex_init(&d->lock);
+
+	for (i = 0; i < chip->num_irqs; i++)
+		d->mask_buf_def[chip->irqs[i].reg_offset / map->reg_stride]
+			|= chip->irqs[i].mask;
+
+	/* Mask all the interrupts by default */
+	for (i = 0; i < chip->num_regs; i++) {
+		d->mask_buf[i] = d->mask_buf_def[i];
+
+		if (chip->handle_mask_sync) {
+			ret = chip->handle_mask_sync(i, d->mask_buf_def[i],
+						     d->mask_buf[i],
+						     chip->irq_drv_data);
+			if (ret)
+				goto err_alloc;
+		}
+
+		if (chip->mask_base && !chip->handle_mask_sync) {
+			reg = d->get_irq_reg(d, chip->mask_base, i);
+			ret = regmap_update_bits(d->map, reg,
+						 d->mask_buf_def[i],
+						 d->mask_buf[i]);
+			if (ret) {
+				dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
+					reg, ret);
+				goto err_alloc;
+			}
+		}
+
+		if (chip->unmask_base && !chip->handle_mask_sync) {
+			reg = d->get_irq_reg(d, chip->unmask_base, i);
+			ret = regmap_update_bits(d->map, reg,
+					d->mask_buf_def[i], ~d->mask_buf[i]);
+			if (ret) {
+				dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
+					reg, ret);
+				goto err_alloc;
+			}
+		}
+
+		if (!chip->init_ack_masked)
+			continue;
+
+		/* Ack masked but set interrupts */
+		if (d->chip->no_status) {
+			/* no status register so default to all active */
+			d->status_buf[i] = GENMASK(31, 0);
+		} else {
+			reg = d->get_irq_reg(d, d->chip->status_base, i);
+			ret = regmap_read(map, reg, &d->status_buf[i]);
+			if (ret != 0) {
+				dev_err(map->dev, "Failed to read IRQ status: %d\n",
+					ret);
+				goto err_alloc;
+			}
+		}
+
+		if (chip->status_invert)
+			d->status_buf[i] = ~d->status_buf[i];
+
+		if (d->status_buf[i] && (chip->ack_base || chip->use_ack)) {
+			reg = d->get_irq_reg(d, d->chip->ack_base, i);
+			if (chip->ack_invert)
+				ret = regmap_write(map, reg,
+					~(d->status_buf[i] & d->mask_buf[i]));
+			else
+				ret = regmap_write(map, reg,
+					d->status_buf[i] & d->mask_buf[i]);
+			if (chip->clear_ack) {
+				if (chip->ack_invert && !ret)
+					ret = regmap_write(map, reg, UINT_MAX);
+				else if (!ret)
+					ret = regmap_write(map, reg, 0);
+			}
+			if (ret != 0) {
+				dev_err(map->dev, "Failed to ack 0x%x: %d\n",
+					reg, ret);
+				goto err_alloc;
+			}
+		}
+	}
+
+	/* Wake is disabled by default */
+	if (d->wake_buf) {
+		for (i = 0; i < chip->num_regs; i++) {
+			d->wake_buf[i] = d->mask_buf_def[i];
+			reg = d->get_irq_reg(d, d->chip->wake_base, i);
+
+			if (chip->wake_invert)
+				ret = regmap_update_bits(d->map, reg,
+							 d->mask_buf_def[i],
+							 0);
+			else
+				ret = regmap_update_bits(d->map, reg,
+							 d->mask_buf_def[i],
+							 d->wake_buf[i]);
+			if (ret != 0) {
+				dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
+					reg, ret);
+				goto err_alloc;
+			}
+		}
+	}
+
+	if (irq_base)
+		d->domain = irq_domain_create_legacy(fwnode, chip->num_irqs,
+						     irq_base, 0,
+						     &regmap_domain_ops, d);
+	else
+		d->domain = irq_domain_create_linear(fwnode, chip->num_irqs,
+						     &regmap_domain_ops, d);
+	if (!d->domain) {
+		dev_err(map->dev, "Failed to create IRQ domain\n");
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	ret = request_threaded_irq(irq, NULL, regmap_irq_thread,
+				   irq_flags | IRQF_ONESHOT,
+				   chip->name, d);
+	if (ret != 0) {
+		dev_err(map->dev, "Failed to request IRQ %d for %s: %d\n",
+			irq, chip->name, ret);
+		goto err_domain;
+	}
+
+	*data = d;
+
+	return 0;
+
+err_domain:
+	/* Should really dispose of the domain but... */
+err_alloc:
+	kfree(d->type_buf);
+	kfree(d->type_buf_def);
+	kfree(d->wake_buf);
+	kfree(d->mask_buf_def);
+	kfree(d->mask_buf);
+	kfree(d->status_buf);
+	kfree(d->status_reg_buf);
+	if (d->config_buf) {
+		for (i = 0; i < chip->num_config_bases; i++)
+			kfree(d->config_buf[i]);
+		kfree(d->config_buf);
+	}
+	kfree(d);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_add_irq_chip_fwnode);
+
+/**
+ * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ *
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts.
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success.
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * This is the same as regmap_add_irq_chip_fwnode, except that the firmware
+ * node of the regmap is used.
+ */
+int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
+			int irq_base, const struct regmap_irq_chip *chip,
+			struct regmap_irq_chip_data **data)
+{
+	return regmap_add_irq_chip_fwnode(dev_fwnode(map->dev), map, irq,
+					  irq_flags, irq_base, chip, data);
+}
+EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
+
+/**
+ * regmap_del_irq_chip() - Stop interrupt handling for a regmap IRQ chip
+ *
+ * @irq: Primary IRQ for the device
+ * @d: &regmap_irq_chip_data allocated by regmap_add_irq_chip()
+ *
+ * This function also disposes of all mapped IRQs on the chip.
+ */
+void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
+{
+	unsigned int virq;
+	int i, hwirq;
+
+	if (!d)
+		return;
+
+	free_irq(irq, d);
+
+	/* Dispose all virtual irq from irq domain before removing it */
+	for (hwirq = 0; hwirq < d->chip->num_irqs; hwirq++) {
+		/* Ignore hwirq if holes in the IRQ list */
+		if (!d->chip->irqs[hwirq].mask)
+			continue;
+
+		/*
+		 * Find the virtual irq of hwirq on chip and if it is
+		 * there then dispose it
+		 */
+		virq = irq_find_mapping(d->domain, hwirq);
+		if (virq)
+			irq_dispose_mapping(virq);
+	}
+
+	irq_domain_remove(d->domain);
+	kfree(d->type_buf);
+	kfree(d->type_buf_def);
+	kfree(d->wake_buf);
+	kfree(d->mask_buf_def);
+	kfree(d->mask_buf);
+	kfree(d->status_reg_buf);
+	kfree(d->status_buf);
+	if (d->config_buf) {
+		for (i = 0; i < d->chip->num_config_bases; i++)
+			kfree(d->config_buf[i]);
+		kfree(d->config_buf);
+	}
+	kfree(d);
+}
+EXPORT_SYMBOL_GPL(regmap_del_irq_chip);
+
+static void devm_regmap_irq_chip_release(struct device *dev, void *res)
+{
+	struct regmap_irq_chip_data *d = *(struct regmap_irq_chip_data **)res;
+
+	regmap_del_irq_chip(d->irq, d);
+}
+
+static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
+
+{
+	struct regmap_irq_chip_data **r = res;
+
+	if (!r || !*r) {
+		WARN_ON(!r || !*r);
+		return 0;
+	}
+	return *r == data;
+}
+
+/**
+ * devm_regmap_add_irq_chip_fwnode() - Resource managed regmap_add_irq_chip_fwnode()
+ *
+ * @dev: The device pointer on which irq_chip belongs to.
+ * @fwnode: The firmware node where the IRQ domain should be added to.
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * The &regmap_irq_chip_data will be automatically released when the device is
+ * unbound.
+ */
+int devm_regmap_add_irq_chip_fwnode(struct device *dev,
+				    struct fwnode_handle *fwnode,
+				    struct regmap *map, int irq,
+				    int irq_flags, int irq_base,
+				    const struct regmap_irq_chip *chip,
+				    struct regmap_irq_chip_data **data)
+{
+	struct regmap_irq_chip_data **ptr, *d;
+	int ret;
+
+	ptr = devres_alloc(devm_regmap_irq_chip_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = regmap_add_irq_chip_fwnode(fwnode, map, irq, irq_flags, irq_base,
+					 chip, &d);
+	if (ret < 0) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	*ptr = d;
+	devres_add(dev, ptr);
+	*data = d;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip_fwnode);
+
+/**
+ * devm_regmap_add_irq_chip() - Resource managed regmap_add_irq_chip()
+ *
+ * @dev: The device pointer on which irq_chip belongs to.
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * The &regmap_irq_chip_data will be automatically released when the device is
+ * unbound.
+ */
+int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
+			     int irq_flags, int irq_base,
+			     const struct regmap_irq_chip *chip,
+			     struct regmap_irq_chip_data **data)
+{
+	return devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(map->dev), map,
+					       irq, irq_flags, irq_base, chip,
+					       data);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip);
+
+/**
+ * devm_regmap_del_irq_chip() - Resource managed regmap_del_irq_chip()
+ *
+ * @dev: Device for which the resource was allocated.
+ * @irq: Primary IRQ for the device.
+ * @data: &regmap_irq_chip_data allocated by regmap_add_irq_chip().
+ *
+ * A resource managed version of regmap_del_irq_chip().
+ */
+void devm_regmap_del_irq_chip(struct device *dev, int irq,
+			      struct regmap_irq_chip_data *data)
+{
+	int rc;
+
+	WARN_ON(irq != data->irq);
+	rc = devres_release(dev, devm_regmap_irq_chip_release,
+			    devm_regmap_irq_chip_match, data);
+
+	if (rc != 0)
+		WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_del_irq_chip);
+
+/**
+ * regmap_irq_chip_get_base() - Retrieve interrupt base for a regmap IRQ chip
+ *
+ * @data: regmap irq controller to operate on.
+ *
+ * Useful for drivers to request their own IRQs.
+ */
+int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data)
+{
+	WARN_ON(!data->irq_base);
+	return data->irq_base;
+}
+EXPORT_SYMBOL_GPL(regmap_irq_chip_get_base);
+
+/**
+ * regmap_irq_get_virq() - Map an interrupt on a chip to a virtual IRQ
+ *
+ * @data: regmap irq controller to operate on.
+ * @irq: index of the interrupt requested in the chip IRQs.
+ *
+ * Useful for drivers to request their own IRQs.
+ */
+int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq)
+{
+	/* Handle holes in the IRQ list */
+	if (!data->chip->irqs[irq].mask)
+		return -EINVAL;
+
+	return irq_create_mapping(data->domain, irq);
+}
+EXPORT_SYMBOL_GPL(regmap_irq_get_virq);
+
+/**
+ * regmap_irq_get_domain() - Retrieve the irq_domain for the chip
+ *
+ * @data: regmap_irq controller to operate on.
+ *
+ * Useful for drivers to request their own IRQs and for integration
+ * with subsystems.  For ease of integration NULL is accepted as a
+ * domain, allowing devices to just call this even if no domain is
+ * allocated.
+ */
+struct irq_domain *regmap_irq_get_domain(struct regmap_irq_chip_data *data)
+{
+	if (data)
+		return data->domain;
+	else
+		return NULL;
+}
+EXPORT_SYMBOL_GPL(regmap_irq_get_domain);