summaryrefslogtreecommitdiffstats
path: root/drivers/base/regmap/regmap-spi-avmm.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/base/regmap/regmap-spi-avmm.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/base/regmap/regmap-spi-avmm.c')
-rw-r--r--drivers/base/regmap/regmap-spi-avmm.c713
1 files changed, 713 insertions, 0 deletions
diff --git a/drivers/base/regmap/regmap-spi-avmm.c b/drivers/base/regmap/regmap-spi-avmm.c
new file mode 100644
index 0000000000..4c2b94b3e3
--- /dev/null
+++ b/drivers/base/regmap/regmap-spi-avmm.c
@@ -0,0 +1,713 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - SPI AVMM support
+//
+// Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+#include <linux/swab.h>
+
+/*
+ * This driver implements the regmap operations for a generic SPI
+ * master to access the registers of the spi slave chip which has an
+ * Avalone bus in it.
+ *
+ * The "SPI slave to Avalon Master Bridge" (spi-avmm) IP should be integrated
+ * in the spi slave chip. The IP acts as a bridge to convert encoded streams of
+ * bytes from the host to the internal register read/write on Avalon bus. In
+ * order to issue register access requests to the slave chip, the host should
+ * send formatted bytes that conform to the transfer protocol.
+ * The transfer protocol contains 3 layers: transaction layer, packet layer
+ * and physical layer.
+ *
+ * Reference Documents could be found at:
+ * https://www.intel.com/content/www/us/en/programmable/documentation/sfo1400787952932.html
+ *
+ * Chapter "SPI Slave/JTAG to Avalon Master Bridge Cores" is a general
+ * introduction to the protocol.
+ *
+ * Chapter "Avalon Packets to Transactions Converter Core" describes
+ * the transaction layer.
+ *
+ * Chapter "Avalon-ST Bytes to Packets and Packets to Bytes Converter Cores"
+ * describes the packet layer.
+ *
+ * Chapter "Avalon-ST Serial Peripheral Interface Core" describes the
+ * physical layer.
+ *
+ *
+ * When host issues a regmap read/write, the driver will transform the request
+ * to byte stream layer by layer. It formats the register addr, value and
+ * length to the transaction layer request, then converts the request to packet
+ * layer bytes stream and then to physical layer bytes stream. Finally the
+ * driver sends the formatted byte stream over SPI bus to the slave chip.
+ *
+ * The spi-avmm IP on the slave chip decodes the byte stream and initiates
+ * register read/write on its internal Avalon bus, and then encodes the
+ * response to byte stream and sends back to host.
+ *
+ * The driver receives the byte stream, reverses the 3 layers transformation,
+ * and finally gets the response value (read out data for register read,
+ * successful written size for register write).
+ */
+
+#define PKT_SOP 0x7a
+#define PKT_EOP 0x7b
+#define PKT_CHANNEL 0x7c
+#define PKT_ESC 0x7d
+
+#define PHY_IDLE 0x4a
+#define PHY_ESC 0x4d
+
+#define TRANS_CODE_WRITE 0x0
+#define TRANS_CODE_SEQ_WRITE 0x4
+#define TRANS_CODE_READ 0x10
+#define TRANS_CODE_SEQ_READ 0x14
+#define TRANS_CODE_NO_TRANS 0x7f
+
+#define SPI_AVMM_XFER_TIMEOUT (msecs_to_jiffies(200))
+
+/* slave's register addr is 32 bits */
+#define SPI_AVMM_REG_SIZE 4UL
+/* slave's register value is 32 bits */
+#define SPI_AVMM_VAL_SIZE 4UL
+
+/*
+ * max rx size could be larger. But considering the buffer consuming,
+ * it is proper that we limit 1KB xfer at max.
+ */
+#define MAX_READ_CNT 256UL
+#define MAX_WRITE_CNT 1UL
+
+struct trans_req_header {
+ u8 code;
+ u8 rsvd;
+ __be16 size;
+ __be32 addr;
+} __packed;
+
+struct trans_resp_header {
+ u8 r_code;
+ u8 rsvd;
+ __be16 size;
+} __packed;
+
+#define TRANS_REQ_HD_SIZE (sizeof(struct trans_req_header))
+#define TRANS_RESP_HD_SIZE (sizeof(struct trans_resp_header))
+
+/*
+ * In transaction layer,
+ * the write request format is: Transaction request header + data
+ * the read request format is: Transaction request header
+ * the write response format is: Transaction response header
+ * the read response format is: pure data, no Transaction response header
+ */
+#define TRANS_WR_TX_SIZE(n) (TRANS_REQ_HD_SIZE + SPI_AVMM_VAL_SIZE * (n))
+#define TRANS_RD_TX_SIZE TRANS_REQ_HD_SIZE
+#define TRANS_TX_MAX TRANS_WR_TX_SIZE(MAX_WRITE_CNT)
+
+#define TRANS_RD_RX_SIZE(n) (SPI_AVMM_VAL_SIZE * (n))
+#define TRANS_WR_RX_SIZE TRANS_RESP_HD_SIZE
+#define TRANS_RX_MAX TRANS_RD_RX_SIZE(MAX_READ_CNT)
+
+/* tx & rx share one transaction layer buffer */
+#define TRANS_BUF_SIZE ((TRANS_TX_MAX > TRANS_RX_MAX) ? \
+ TRANS_TX_MAX : TRANS_RX_MAX)
+
+/*
+ * In tx phase, the host prepares all the phy layer bytes of a request in the
+ * phy buffer and sends them in a batch.
+ *
+ * The packet layer and physical layer defines several special chars for
+ * various purpose, when a transaction layer byte hits one of these special
+ * chars, it should be escaped. The escape rule is, "Escape char first,
+ * following the byte XOR'ed with 0x20".
+ *
+ * This macro defines the max possible length of the phy data. In the worst
+ * case, all transaction layer bytes need to be escaped (so the data length
+ * doubles), plus 4 special chars (SOP, CHANNEL, CHANNEL_NUM, EOP). Finally
+ * we should make sure the length is aligned to SPI BPW.
+ */
+#define PHY_TX_MAX ALIGN(2 * TRANS_TX_MAX + 4, 4)
+
+/*
+ * Unlike tx, phy rx is affected by possible PHY_IDLE bytes from slave, the max
+ * length of the rx bit stream is unpredictable. So the driver reads the words
+ * one by one, and parses each word immediately into transaction layer buffer.
+ * Only one word length of phy buffer is used for rx.
+ */
+#define PHY_BUF_SIZE PHY_TX_MAX
+
+/**
+ * struct spi_avmm_bridge - SPI slave to AVMM bus master bridge
+ *
+ * @spi: spi slave associated with this bridge.
+ * @word_len: bytes of word for spi transfer.
+ * @trans_len: length of valid data in trans_buf.
+ * @phy_len: length of valid data in phy_buf.
+ * @trans_buf: the bridge buffer for transaction layer data.
+ * @phy_buf: the bridge buffer for physical layer data.
+ * @swap_words: the word swapping cb for phy data. NULL if not needed.
+ *
+ * As a device's registers are implemented on the AVMM bus address space, it
+ * requires the driver to issue formatted requests to spi slave to AVMM bus
+ * master bridge to perform register access.
+ */
+struct spi_avmm_bridge {
+ struct spi_device *spi;
+ unsigned char word_len;
+ unsigned int trans_len;
+ unsigned int phy_len;
+ /* bridge buffer used in translation between protocol layers */
+ char trans_buf[TRANS_BUF_SIZE];
+ char phy_buf[PHY_BUF_SIZE];
+ void (*swap_words)(void *buf, unsigned int len);
+};
+
+static void br_swap_words_32(void *buf, unsigned int len)
+{
+ swab32_array(buf, len / 4);
+}
+
+/*
+ * Format transaction layer data in br->trans_buf according to the register
+ * access request, Store valid transaction layer data length in br->trans_len.
+ */
+static int br_trans_tx_prepare(struct spi_avmm_bridge *br, bool is_read, u32 reg,
+ u32 *wr_val, u32 count)
+{
+ struct trans_req_header *header;
+ unsigned int trans_len;
+ u8 code;
+ __le32 *data;
+ int i;
+
+ if (is_read) {
+ if (count == 1)
+ code = TRANS_CODE_READ;
+ else
+ code = TRANS_CODE_SEQ_READ;
+ } else {
+ if (count == 1)
+ code = TRANS_CODE_WRITE;
+ else
+ code = TRANS_CODE_SEQ_WRITE;
+ }
+
+ header = (struct trans_req_header *)br->trans_buf;
+ header->code = code;
+ header->rsvd = 0;
+ header->size = cpu_to_be16((u16)count * SPI_AVMM_VAL_SIZE);
+ header->addr = cpu_to_be32(reg);
+
+ trans_len = TRANS_REQ_HD_SIZE;
+
+ if (!is_read) {
+ trans_len += SPI_AVMM_VAL_SIZE * count;
+ if (trans_len > sizeof(br->trans_buf))
+ return -ENOMEM;
+
+ data = (__le32 *)(br->trans_buf + TRANS_REQ_HD_SIZE);
+
+ for (i = 0; i < count; i++)
+ *data++ = cpu_to_le32(*wr_val++);
+ }
+
+ /* Store valid trans data length for next layer */
+ br->trans_len = trans_len;
+
+ return 0;
+}
+
+/*
+ * Convert transaction layer data (in br->trans_buf) to phy layer data, store
+ * them in br->phy_buf. Pad the phy_buf aligned with SPI's BPW. Store valid phy
+ * layer data length in br->phy_len.
+ *
+ * phy_buf len should be aligned with SPI's BPW. Spare bytes should be padded
+ * with PHY_IDLE, then the slave will just drop them.
+ *
+ * The driver will not simply pad 4a at the tail. The concern is that driver
+ * will not store MISO data during tx phase, if the driver pads 4a at the tail,
+ * it is possible that if the slave is fast enough to response at the padding
+ * time. As a result these rx bytes are lost. In the following case, 7a,7c,00
+ * will lost.
+ * MOSI ...|7a|7c|00|10| |00|00|04|02| |4b|7d|5a|7b| |40|4a|4a|4a| |XX|XX|...
+ * MISO ...|4a|4a|4a|4a| |4a|4a|4a|4a| |4a|4a|4a|4a| |4a|7a|7c|00| |78|56|...
+ *
+ * So the driver moves EOP and bytes after EOP to the end of the aligned size,
+ * then fill the hole with PHY_IDLE. As following:
+ * before pad ...|7a|7c|00|10| |00|00|04|02| |4b|7d|5a|7b| |40|
+ * after pad ...|7a|7c|00|10| |00|00|04|02| |4b|7d|5a|4a| |4a|4a|7b|40|
+ * Then if the slave will not get the entire packet before the tx phase is
+ * over, it can't responsed to anything either.
+ */
+static int br_pkt_phy_tx_prepare(struct spi_avmm_bridge *br)
+{
+ char *tb, *tb_end, *pb, *pb_limit, *pb_eop = NULL;
+ unsigned int aligned_phy_len, move_size;
+ bool need_esc = false;
+
+ tb = br->trans_buf;
+ tb_end = tb + br->trans_len;
+ pb = br->phy_buf;
+ pb_limit = pb + ARRAY_SIZE(br->phy_buf);
+
+ *pb++ = PKT_SOP;
+
+ /*
+ * The driver doesn't support multiple channels so the channel number
+ * is always 0.
+ */
+ *pb++ = PKT_CHANNEL;
+ *pb++ = 0x0;
+
+ for (; pb < pb_limit && tb < tb_end; pb++) {
+ if (need_esc) {
+ *pb = *tb++ ^ 0x20;
+ need_esc = false;
+ continue;
+ }
+
+ /* EOP should be inserted before the last valid char */
+ if (tb == tb_end - 1 && !pb_eop) {
+ *pb = PKT_EOP;
+ pb_eop = pb;
+ continue;
+ }
+
+ /*
+ * insert an ESCAPE char if the data value equals any special
+ * char.
+ */
+ switch (*tb) {
+ case PKT_SOP:
+ case PKT_EOP:
+ case PKT_CHANNEL:
+ case PKT_ESC:
+ *pb = PKT_ESC;
+ need_esc = true;
+ break;
+ case PHY_IDLE:
+ case PHY_ESC:
+ *pb = PHY_ESC;
+ need_esc = true;
+ break;
+ default:
+ *pb = *tb++;
+ break;
+ }
+ }
+
+ /* The phy buffer is used out but transaction layer data remains */
+ if (tb < tb_end)
+ return -ENOMEM;
+
+ /* Store valid phy data length for spi transfer */
+ br->phy_len = pb - br->phy_buf;
+
+ if (br->word_len == 1)
+ return 0;
+
+ /* Do phy buf padding if word_len > 1 byte. */
+ aligned_phy_len = ALIGN(br->phy_len, br->word_len);
+ if (aligned_phy_len > sizeof(br->phy_buf))
+ return -ENOMEM;
+
+ if (aligned_phy_len == br->phy_len)
+ return 0;
+
+ /* move EOP and bytes after EOP to the end of aligned size */
+ move_size = pb - pb_eop;
+ memmove(&br->phy_buf[aligned_phy_len - move_size], pb_eop, move_size);
+
+ /* fill the hole with PHY_IDLEs */
+ memset(pb_eop, PHY_IDLE, aligned_phy_len - br->phy_len);
+
+ /* update the phy data length */
+ br->phy_len = aligned_phy_len;
+
+ return 0;
+}
+
+/*
+ * In tx phase, the slave only returns PHY_IDLE (0x4a). So the driver will
+ * ignore rx in tx phase.
+ */
+static int br_do_tx(struct spi_avmm_bridge *br)
+{
+ /* reorder words for spi transfer */
+ if (br->swap_words)
+ br->swap_words(br->phy_buf, br->phy_len);
+
+ /* send all data in phy_buf */
+ return spi_write(br->spi, br->phy_buf, br->phy_len);
+}
+
+/*
+ * This function read the rx byte stream from SPI word by word and convert
+ * them to transaction layer data in br->trans_buf. It also stores the length
+ * of rx transaction layer data in br->trans_len
+ *
+ * The slave may send an unknown number of PHY_IDLEs in rx phase, so we cannot
+ * prepare a fixed length buffer to receive all of the rx data in a batch. We
+ * have to read word by word and convert them to transaction layer data at
+ * once.
+ */
+static int br_do_rx_and_pkt_phy_parse(struct spi_avmm_bridge *br)
+{
+ bool eop_found = false, channel_found = false, esc_found = false;
+ bool valid_word = false, last_try = false;
+ struct device *dev = &br->spi->dev;
+ char *pb, *tb_limit, *tb = NULL;
+ unsigned long poll_timeout;
+ int ret, i;
+
+ tb_limit = br->trans_buf + ARRAY_SIZE(br->trans_buf);
+ pb = br->phy_buf;
+ poll_timeout = jiffies + SPI_AVMM_XFER_TIMEOUT;
+ while (tb < tb_limit) {
+ ret = spi_read(br->spi, pb, br->word_len);
+ if (ret)
+ return ret;
+
+ /* reorder the word back */
+ if (br->swap_words)
+ br->swap_words(pb, br->word_len);
+
+ valid_word = false;
+ for (i = 0; i < br->word_len; i++) {
+ /* drop everything before first SOP */
+ if (!tb && pb[i] != PKT_SOP)
+ continue;
+
+ /* drop PHY_IDLE */
+ if (pb[i] == PHY_IDLE)
+ continue;
+
+ valid_word = true;
+
+ /*
+ * We don't support multiple channels, so error out if
+ * a non-zero channel number is found.
+ */
+ if (channel_found) {
+ if (pb[i] != 0) {
+ dev_err(dev, "%s channel num != 0\n",
+ __func__);
+ return -EFAULT;
+ }
+
+ channel_found = false;
+ continue;
+ }
+
+ switch (pb[i]) {
+ case PKT_SOP:
+ /*
+ * reset the parsing if a second SOP appears.
+ */
+ tb = br->trans_buf;
+ eop_found = false;
+ channel_found = false;
+ esc_found = false;
+ break;
+ case PKT_EOP:
+ /*
+ * No special char is expected after ESC char.
+ * No special char (except ESC & PHY_IDLE) is
+ * expected after EOP char.
+ *
+ * The special chars are all dropped.
+ */
+ if (esc_found || eop_found)
+ return -EFAULT;
+
+ eop_found = true;
+ break;
+ case PKT_CHANNEL:
+ if (esc_found || eop_found)
+ return -EFAULT;
+
+ channel_found = true;
+ break;
+ case PKT_ESC:
+ case PHY_ESC:
+ if (esc_found)
+ return -EFAULT;
+
+ esc_found = true;
+ break;
+ default:
+ /* Record the normal byte in trans_buf. */
+ if (esc_found) {
+ *tb++ = pb[i] ^ 0x20;
+ esc_found = false;
+ } else {
+ *tb++ = pb[i];
+ }
+
+ /*
+ * We get the last normal byte after EOP, it is
+ * time we finish. Normally the function should
+ * return here.
+ */
+ if (eop_found) {
+ br->trans_len = tb - br->trans_buf;
+ return 0;
+ }
+ }
+ }
+
+ if (valid_word) {
+ /* update poll timeout when we get valid word */
+ poll_timeout = jiffies + SPI_AVMM_XFER_TIMEOUT;
+ last_try = false;
+ } else {
+ /*
+ * We timeout when rx keeps invalid for some time. But
+ * it is possible we are scheduled out for long time
+ * after a spi_read. So when we are scheduled in, a SW
+ * timeout happens. But actually HW may have worked fine and
+ * has been ready long time ago. So we need to do an extra
+ * read, if we get a valid word then we could continue rx,
+ * otherwise real a HW issue happens.
+ */
+ if (last_try)
+ return -ETIMEDOUT;
+
+ if (time_after(jiffies, poll_timeout))
+ last_try = true;
+ }
+ }
+
+ /*
+ * We have used out all transfer layer buffer but cannot find the end
+ * of the byte stream.
+ */
+ dev_err(dev, "%s transfer buffer is full but rx doesn't end\n",
+ __func__);
+
+ return -EFAULT;
+}
+
+/*
+ * For read transactions, the avmm bus will directly return register values
+ * without transaction response header.
+ */
+static int br_rd_trans_rx_parse(struct spi_avmm_bridge *br,
+ u32 *val, unsigned int expected_count)
+{
+ unsigned int i, trans_len = br->trans_len;
+ __le32 *data;
+
+ if (expected_count * SPI_AVMM_VAL_SIZE != trans_len)
+ return -EFAULT;
+
+ data = (__le32 *)br->trans_buf;
+ for (i = 0; i < expected_count; i++)
+ *val++ = le32_to_cpu(*data++);
+
+ return 0;
+}
+
+/*
+ * For write transactions, the slave will return a transaction response
+ * header.
+ */
+static int br_wr_trans_rx_parse(struct spi_avmm_bridge *br,
+ unsigned int expected_count)
+{
+ unsigned int trans_len = br->trans_len;
+ struct trans_resp_header *resp;
+ u8 code;
+ u16 val_len;
+
+ if (trans_len != TRANS_RESP_HD_SIZE)
+ return -EFAULT;
+
+ resp = (struct trans_resp_header *)br->trans_buf;
+
+ code = resp->r_code ^ 0x80;
+ val_len = be16_to_cpu(resp->size);
+ if (!val_len || val_len != expected_count * SPI_AVMM_VAL_SIZE)
+ return -EFAULT;
+
+ /* error out if the trans code doesn't align with the val size */
+ if ((val_len == SPI_AVMM_VAL_SIZE && code != TRANS_CODE_WRITE) ||
+ (val_len > SPI_AVMM_VAL_SIZE && code != TRANS_CODE_SEQ_WRITE))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int do_reg_access(void *context, bool is_read, unsigned int reg,
+ unsigned int *value, unsigned int count)
+{
+ struct spi_avmm_bridge *br = context;
+ int ret;
+
+ /* invalidate bridge buffers first */
+ br->trans_len = 0;
+ br->phy_len = 0;
+
+ ret = br_trans_tx_prepare(br, is_read, reg, value, count);
+ if (ret)
+ return ret;
+
+ ret = br_pkt_phy_tx_prepare(br);
+ if (ret)
+ return ret;
+
+ ret = br_do_tx(br);
+ if (ret)
+ return ret;
+
+ ret = br_do_rx_and_pkt_phy_parse(br);
+ if (ret)
+ return ret;
+
+ if (is_read)
+ return br_rd_trans_rx_parse(br, value, count);
+ else
+ return br_wr_trans_rx_parse(br, count);
+}
+
+static int regmap_spi_avmm_gather_write(void *context,
+ const void *reg_buf, size_t reg_len,
+ const void *val_buf, size_t val_len)
+{
+ if (reg_len != SPI_AVMM_REG_SIZE)
+ return -EINVAL;
+
+ if (!IS_ALIGNED(val_len, SPI_AVMM_VAL_SIZE))
+ return -EINVAL;
+
+ return do_reg_access(context, false, *(u32 *)reg_buf, (u32 *)val_buf,
+ val_len / SPI_AVMM_VAL_SIZE);
+}
+
+static int regmap_spi_avmm_write(void *context, const void *data, size_t bytes)
+{
+ if (bytes < SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE)
+ return -EINVAL;
+
+ return regmap_spi_avmm_gather_write(context, data, SPI_AVMM_REG_SIZE,
+ data + SPI_AVMM_REG_SIZE,
+ bytes - SPI_AVMM_REG_SIZE);
+}
+
+static int regmap_spi_avmm_read(void *context,
+ const void *reg_buf, size_t reg_len,
+ void *val_buf, size_t val_len)
+{
+ if (reg_len != SPI_AVMM_REG_SIZE)
+ return -EINVAL;
+
+ if (!IS_ALIGNED(val_len, SPI_AVMM_VAL_SIZE))
+ return -EINVAL;
+
+ return do_reg_access(context, true, *(u32 *)reg_buf, val_buf,
+ (val_len / SPI_AVMM_VAL_SIZE));
+}
+
+static struct spi_avmm_bridge *
+spi_avmm_bridge_ctx_gen(struct spi_device *spi)
+{
+ struct spi_avmm_bridge *br;
+
+ if (!spi)
+ return ERR_PTR(-ENODEV);
+
+ /* Only support BPW == 8 or 32 now. Try 32 BPW first. */
+ spi->mode = SPI_MODE_1;
+ spi->bits_per_word = 32;
+ if (spi_setup(spi)) {
+ spi->bits_per_word = 8;
+ if (spi_setup(spi))
+ return ERR_PTR(-EINVAL);
+ }
+
+ br = kzalloc(sizeof(*br), GFP_KERNEL);
+ if (!br)
+ return ERR_PTR(-ENOMEM);
+
+ br->spi = spi;
+ br->word_len = spi->bits_per_word / 8;
+ if (br->word_len == 4) {
+ /*
+ * The protocol requires little endian byte order but MSB
+ * first. So driver needs to swap the byte order word by word
+ * if word length > 1.
+ */
+ br->swap_words = br_swap_words_32;
+ }
+
+ return br;
+}
+
+static void spi_avmm_bridge_ctx_free(void *context)
+{
+ kfree(context);
+}
+
+static const struct regmap_bus regmap_spi_avmm_bus = {
+ .write = regmap_spi_avmm_write,
+ .gather_write = regmap_spi_avmm_gather_write,
+ .read = regmap_spi_avmm_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .max_raw_read = SPI_AVMM_VAL_SIZE * MAX_READ_CNT,
+ .max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT,
+ .free_context = spi_avmm_bridge_ctx_free,
+};
+
+struct regmap *__regmap_init_spi_avmm(struct spi_device *spi,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ struct spi_avmm_bridge *bridge;
+ struct regmap *map;
+
+ bridge = spi_avmm_bridge_ctx_gen(spi);
+ if (IS_ERR(bridge))
+ return ERR_CAST(bridge);
+
+ map = __regmap_init(&spi->dev, &regmap_spi_avmm_bus,
+ bridge, config, lock_key, lock_name);
+ if (IS_ERR(map)) {
+ spi_avmm_bridge_ctx_free(bridge);
+ return ERR_CAST(map);
+ }
+
+ return map;
+}
+EXPORT_SYMBOL_GPL(__regmap_init_spi_avmm);
+
+struct regmap *__devm_regmap_init_spi_avmm(struct spi_device *spi,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ struct spi_avmm_bridge *bridge;
+ struct regmap *map;
+
+ bridge = spi_avmm_bridge_ctx_gen(spi);
+ if (IS_ERR(bridge))
+ return ERR_CAST(bridge);
+
+ map = __devm_regmap_init(&spi->dev, &regmap_spi_avmm_bus,
+ bridge, config, lock_key, lock_name);
+ if (IS_ERR(map)) {
+ spi_avmm_bridge_ctx_free(bridge);
+ return ERR_CAST(map);
+ }
+
+ return map;
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_spi_avmm);
+
+MODULE_LICENSE("GPL v2");