Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2352 insertions, 0 deletions

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
new file mode 100644
index 0000000000..fb04734afc
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -0,0 +1,2352 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010,2015 Broadcom
+ * Copyright (C) 2012 Stephen Warren
+ */
+
+/**
+ * DOC: BCM2835 CPRMAN (clock manager for the "audio" domain)
+ *
+ * The clock tree on the 2835 has several levels.  There's a root
+ * oscillator running at 19.2Mhz.  After the oscillator there are 5
+ * PLLs, roughly divided as "camera", "ARM", "core", "DSI displays",
+ * and "HDMI displays".  Those 5 PLLs each can divide their output to
+ * produce up to 4 channels.  Finally, there is the level of clocks to
+ * be consumed by other hardware components (like "H264" or "HDMI
+ * state machine"), which divide off of some subset of the PLL
+ * channels.
+ *
+ * All of the clocks in the tree are exposed in the DT, because the DT
+ * may want to make assignments of the final layer of clocks to the
+ * PLL channels, and some components of the hardware will actually
+ * skip layers of the tree (for example, the pixel clock comes
+ * directly from the PLLH PIX channel without using a CM_*CTL clock
+ * generator).
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <dt-bindings/clock/bcm2835.h>
+
+#define CM_PASSWORD		0x5a000000
+
+#define CM_GNRICCTL		0x000
+#define CM_GNRICDIV		0x004
+# define CM_DIV_FRAC_BITS	12
+# define CM_DIV_FRAC_MASK	GENMASK(CM_DIV_FRAC_BITS - 1, 0)
+
+#define CM_VPUCTL		0x008
+#define CM_VPUDIV		0x00c
+#define CM_SYSCTL		0x010
+#define CM_SYSDIV		0x014
+#define CM_PERIACTL		0x018
+#define CM_PERIADIV		0x01c
+#define CM_PERIICTL		0x020
+#define CM_PERIIDIV		0x024
+#define CM_H264CTL		0x028
+#define CM_H264DIV		0x02c
+#define CM_ISPCTL		0x030
+#define CM_ISPDIV		0x034
+#define CM_V3DCTL		0x038
+#define CM_V3DDIV		0x03c
+#define CM_CAM0CTL		0x040
+#define CM_CAM0DIV		0x044
+#define CM_CAM1CTL		0x048
+#define CM_CAM1DIV		0x04c
+#define CM_CCP2CTL		0x050
+#define CM_CCP2DIV		0x054
+#define CM_DSI0ECTL		0x058
+#define CM_DSI0EDIV		0x05c
+#define CM_DSI0PCTL		0x060
+#define CM_DSI0PDIV		0x064
+#define CM_DPICTL		0x068
+#define CM_DPIDIV		0x06c
+#define CM_GP0CTL		0x070
+#define CM_GP0DIV		0x074
+#define CM_GP1CTL		0x078
+#define CM_GP1DIV		0x07c
+#define CM_GP2CTL		0x080
+#define CM_GP2DIV		0x084
+#define CM_HSMCTL		0x088
+#define CM_HSMDIV		0x08c
+#define CM_OTPCTL		0x090
+#define CM_OTPDIV		0x094
+#define CM_PCMCTL		0x098
+#define CM_PCMDIV		0x09c
+#define CM_PWMCTL		0x0a0
+#define CM_PWMDIV		0x0a4
+#define CM_SLIMCTL		0x0a8
+#define CM_SLIMDIV		0x0ac
+#define CM_SMICTL		0x0b0
+#define CM_SMIDIV		0x0b4
+/* no definition for 0x0b8  and 0x0bc */
+#define CM_TCNTCTL		0x0c0
+# define CM_TCNT_SRC1_SHIFT		12
+#define CM_TCNTCNT		0x0c4
+#define CM_TECCTL		0x0c8
+#define CM_TECDIV		0x0cc
+#define CM_TD0CTL		0x0d0
+#define CM_TD0DIV		0x0d4
+#define CM_TD1CTL		0x0d8
+#define CM_TD1DIV		0x0dc
+#define CM_TSENSCTL		0x0e0
+#define CM_TSENSDIV		0x0e4
+#define CM_TIMERCTL		0x0e8
+#define CM_TIMERDIV		0x0ec
+#define CM_UARTCTL		0x0f0
+#define CM_UARTDIV		0x0f4
+#define CM_VECCTL		0x0f8
+#define CM_VECDIV		0x0fc
+#define CM_PULSECTL		0x190
+#define CM_PULSEDIV		0x194
+#define CM_SDCCTL		0x1a8
+#define CM_SDCDIV		0x1ac
+#define CM_ARMCTL		0x1b0
+#define CM_AVEOCTL		0x1b8
+#define CM_AVEODIV		0x1bc
+#define CM_EMMCCTL		0x1c0
+#define CM_EMMCDIV		0x1c4
+#define CM_EMMC2CTL		0x1d0
+#define CM_EMMC2DIV		0x1d4
+
+/* General bits for the CM_*CTL regs */
+# define CM_ENABLE			BIT(4)
+# define CM_KILL			BIT(5)
+# define CM_GATE_BIT			6
+# define CM_GATE			BIT(CM_GATE_BIT)
+# define CM_BUSY			BIT(7)
+# define CM_BUSYD			BIT(8)
+# define CM_FRAC			BIT(9)
+# define CM_SRC_SHIFT			0
+# define CM_SRC_BITS			4
+# define CM_SRC_MASK			0xf
+# define CM_SRC_GND			0
+# define CM_SRC_OSC			1
+# define CM_SRC_TESTDEBUG0		2
+# define CM_SRC_TESTDEBUG1		3
+# define CM_SRC_PLLA_CORE		4
+# define CM_SRC_PLLA_PER		4
+# define CM_SRC_PLLC_CORE0		5
+# define CM_SRC_PLLC_PER		5
+# define CM_SRC_PLLC_CORE1		8
+# define CM_SRC_PLLD_CORE		6
+# define CM_SRC_PLLD_PER		6
+# define CM_SRC_PLLH_AUX		7
+# define CM_SRC_PLLC_CORE1		8
+# define CM_SRC_PLLC_CORE2		9
+
+#define CM_OSCCOUNT		0x100
+
+#define CM_PLLA			0x104
+# define CM_PLL_ANARST			BIT(8)
+# define CM_PLLA_HOLDPER		BIT(7)
+# define CM_PLLA_LOADPER		BIT(6)
+# define CM_PLLA_HOLDCORE		BIT(5)
+# define CM_PLLA_LOADCORE		BIT(4)
+# define CM_PLLA_HOLDCCP2		BIT(3)
+# define CM_PLLA_LOADCCP2		BIT(2)
+# define CM_PLLA_HOLDDSI0		BIT(1)
+# define CM_PLLA_LOADDSI0		BIT(0)
+
+#define CM_PLLC			0x108
+# define CM_PLLC_HOLDPER		BIT(7)
+# define CM_PLLC_LOADPER		BIT(6)
+# define CM_PLLC_HOLDCORE2		BIT(5)
+# define CM_PLLC_LOADCORE2		BIT(4)
+# define CM_PLLC_HOLDCORE1		BIT(3)
+# define CM_PLLC_LOADCORE1		BIT(2)
+# define CM_PLLC_HOLDCORE0		BIT(1)
+# define CM_PLLC_LOADCORE0		BIT(0)
+
+#define CM_PLLD			0x10c
+# define CM_PLLD_HOLDPER		BIT(7)
+# define CM_PLLD_LOADPER		BIT(6)
+# define CM_PLLD_HOLDCORE		BIT(5)
+# define CM_PLLD_LOADCORE		BIT(4)
+# define CM_PLLD_HOLDDSI1		BIT(3)
+# define CM_PLLD_LOADDSI1		BIT(2)
+# define CM_PLLD_HOLDDSI0		BIT(1)
+# define CM_PLLD_LOADDSI0		BIT(0)
+
+#define CM_PLLH			0x110
+# define CM_PLLH_LOADRCAL		BIT(2)
+# define CM_PLLH_LOADAUX		BIT(1)
+# define CM_PLLH_LOADPIX		BIT(0)
+
+#define CM_LOCK			0x114
+# define CM_LOCK_FLOCKH			BIT(12)
+# define CM_LOCK_FLOCKD			BIT(11)
+# define CM_LOCK_FLOCKC			BIT(10)
+# define CM_LOCK_FLOCKB			BIT(9)
+# define CM_LOCK_FLOCKA			BIT(8)
+
+#define CM_EVENT		0x118
+#define CM_DSI1ECTL		0x158
+#define CM_DSI1EDIV		0x15c
+#define CM_DSI1PCTL		0x160
+#define CM_DSI1PDIV		0x164
+#define CM_DFTCTL		0x168
+#define CM_DFTDIV		0x16c
+
+#define CM_PLLB			0x170
+# define CM_PLLB_HOLDARM		BIT(1)
+# define CM_PLLB_LOADARM		BIT(0)
+
+#define A2W_PLLA_CTRL		0x1100
+#define A2W_PLLC_CTRL		0x1120
+#define A2W_PLLD_CTRL		0x1140
+#define A2W_PLLH_CTRL		0x1160
+#define A2W_PLLB_CTRL		0x11e0
+# define A2W_PLL_CTRL_PRST_DISABLE	BIT(17)
+# define A2W_PLL_CTRL_PWRDN		BIT(16)
+# define A2W_PLL_CTRL_PDIV_MASK		0x000007000
+# define A2W_PLL_CTRL_PDIV_SHIFT	12
+# define A2W_PLL_CTRL_NDIV_MASK		0x0000003ff
+# define A2W_PLL_CTRL_NDIV_SHIFT	0
+
+#define A2W_PLLA_ANA0		0x1010
+#define A2W_PLLC_ANA0		0x1030
+#define A2W_PLLD_ANA0		0x1050
+#define A2W_PLLH_ANA0		0x1070
+#define A2W_PLLB_ANA0		0x10f0
+
+#define A2W_PLL_KA_SHIFT	7
+#define A2W_PLL_KA_MASK		GENMASK(9, 7)
+#define A2W_PLL_KI_SHIFT	19
+#define A2W_PLL_KI_MASK		GENMASK(21, 19)
+#define A2W_PLL_KP_SHIFT	15
+#define A2W_PLL_KP_MASK		GENMASK(18, 15)
+
+#define A2W_PLLH_KA_SHIFT	19
+#define A2W_PLLH_KA_MASK	GENMASK(21, 19)
+#define A2W_PLLH_KI_LOW_SHIFT	22
+#define A2W_PLLH_KI_LOW_MASK	GENMASK(23, 22)
+#define A2W_PLLH_KI_HIGH_SHIFT	0
+#define A2W_PLLH_KI_HIGH_MASK	GENMASK(0, 0)
+#define A2W_PLLH_KP_SHIFT	1
+#define A2W_PLLH_KP_MASK	GENMASK(4, 1)
+
+#define A2W_XOSC_CTRL		0x1190
+# define A2W_XOSC_CTRL_PLLB_ENABLE	BIT(7)
+# define A2W_XOSC_CTRL_PLLA_ENABLE	BIT(6)
+# define A2W_XOSC_CTRL_PLLD_ENABLE	BIT(5)
+# define A2W_XOSC_CTRL_DDR_ENABLE	BIT(4)
+# define A2W_XOSC_CTRL_CPR1_ENABLE	BIT(3)
+# define A2W_XOSC_CTRL_USB_ENABLE	BIT(2)
+# define A2W_XOSC_CTRL_HDMI_ENABLE	BIT(1)
+# define A2W_XOSC_CTRL_PLLC_ENABLE	BIT(0)
+
+#define A2W_PLLA_FRAC		0x1200
+#define A2W_PLLC_FRAC		0x1220
+#define A2W_PLLD_FRAC		0x1240
+#define A2W_PLLH_FRAC		0x1260
+#define A2W_PLLB_FRAC		0x12e0
+# define A2W_PLL_FRAC_MASK		((1 << A2W_PLL_FRAC_BITS) - 1)
+# define A2W_PLL_FRAC_BITS		20
+
+#define A2W_PLL_CHANNEL_DISABLE		BIT(8)
+#define A2W_PLL_DIV_BITS		8
+#define A2W_PLL_DIV_SHIFT		0
+
+#define A2W_PLLA_DSI0		0x1300
+#define A2W_PLLA_CORE		0x1400
+#define A2W_PLLA_PER		0x1500
+#define A2W_PLLA_CCP2		0x1600
+
+#define A2W_PLLC_CORE2		0x1320
+#define A2W_PLLC_CORE1		0x1420
+#define A2W_PLLC_PER		0x1520
+#define A2W_PLLC_CORE0		0x1620
+
+#define A2W_PLLD_DSI0		0x1340
+#define A2W_PLLD_CORE		0x1440
+#define A2W_PLLD_PER		0x1540
+#define A2W_PLLD_DSI1		0x1640
+
+#define A2W_PLLH_AUX		0x1360
+#define A2W_PLLH_RCAL		0x1460
+#define A2W_PLLH_PIX		0x1560
+#define A2W_PLLH_STS		0x1660
+
+#define A2W_PLLH_CTRLR		0x1960
+#define A2W_PLLH_FRACR		0x1a60
+#define A2W_PLLH_AUXR		0x1b60
+#define A2W_PLLH_RCALR		0x1c60
+#define A2W_PLLH_PIXR		0x1d60
+#define A2W_PLLH_STSR		0x1e60
+
+#define A2W_PLLB_ARM		0x13e0
+#define A2W_PLLB_SP0		0x14e0
+#define A2W_PLLB_SP1		0x15e0
+#define A2W_PLLB_SP2		0x16e0
+
+#define LOCK_TIMEOUT_NS		100000000
+#define BCM2835_MAX_FB_RATE	1750000000u
+
+#define SOC_BCM2835		BIT(0)
+#define SOC_BCM2711		BIT(1)
+#define SOC_ALL			(SOC_BCM2835 | SOC_BCM2711)
+
+/*
+ * Names of clocks used within the driver that need to be replaced
+ * with an external parent's name.  This array is in the order that
+ * the clocks node in the DT references external clocks.
+ */
+static const char *const cprman_parent_names[] = {
+	"xosc",
+	"dsi0_byte",
+	"dsi0_ddr2",
+	"dsi0_ddr",
+	"dsi1_byte",
+	"dsi1_ddr2",
+	"dsi1_ddr",
+};
+
+struct bcm2835_cprman {
+	struct device *dev;
+	void __iomem *regs;
+	spinlock_t regs_lock; /* spinlock for all clocks */
+	unsigned int soc;
+
+	/*
+	 * Real names of cprman clock parents looked up through
+	 * of_clk_get_parent_name(), which will be used in the
+	 * parent_names[] arrays for clock registration.
+	 */
+	const char *real_parent_names[ARRAY_SIZE(cprman_parent_names)];
+
+	/* Must be last */
+	struct clk_hw_onecell_data onecell;
+};
+
+struct cprman_plat_data {
+	unsigned int soc;
+};
+
+static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
+{
+	writel(CM_PASSWORD | val, cprman->regs + reg);
+}
+
+static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)
+{
+	return readl(cprman->regs + reg);
+}
+
+/* Does a cycle of measuring a clock through the TCNT clock, which may
+ * source from many other clocks in the system.
+ */
+static unsigned long bcm2835_measure_tcnt_mux(struct bcm2835_cprman *cprman,
+					      u32 tcnt_mux)
+{
+	u32 osccount = 19200; /* 1ms */
+	u32 count;
+	ktime_t timeout;
+
+	spin_lock(&cprman->regs_lock);
+
+	cprman_write(cprman, CM_TCNTCTL, CM_KILL);
+
+	cprman_write(cprman, CM_TCNTCTL,
+		     (tcnt_mux & CM_SRC_MASK) |
+		     (tcnt_mux >> CM_SRC_BITS) << CM_TCNT_SRC1_SHIFT);
+
+	cprman_write(cprman, CM_OSCCOUNT, osccount);
+
+	/* do a kind delay at the start */
+	mdelay(1);
+
+	/* Finish off whatever is left of OSCCOUNT */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (cprman_read(cprman, CM_OSCCOUNT)) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "timeout waiting for OSCCOUNT\n");
+			count = 0;
+			goto out;
+		}
+		cpu_relax();
+	}
+
+	/* Wait for BUSY to clear. */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "timeout waiting for !BUSY\n");
+			count = 0;
+			goto out;
+		}
+		cpu_relax();
+	}
+
+	count = cprman_read(cprman, CM_TCNTCNT);
+
+	cprman_write(cprman, CM_TCNTCTL, 0);
+
+out:
+	spin_unlock(&cprman->regs_lock);
+
+	return count * 1000;
+}
+
+static void bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base,
+				   const struct debugfs_reg32 *regs,
+				   size_t nregs, struct dentry *dentry)
+{
+	struct debugfs_regset32 *regset;
+
+	regset = devm_kzalloc(cprman->dev, sizeof(*regset), GFP_KERNEL);
+	if (!regset)
+		return;
+
+	regset->regs = regs;
+	regset->nregs = nregs;
+	regset->base = cprman->regs + base;
+
+	debugfs_create_regset32("regdump", S_IRUGO, dentry, regset);
+}
+
+struct bcm2835_pll_data {
+	const char *name;
+	u32 cm_ctrl_reg;
+	u32 a2w_ctrl_reg;
+	u32 frac_reg;
+	u32 ana_reg_base;
+	u32 reference_enable_mask;
+	/* Bit in CM_LOCK to indicate when the PLL has locked. */
+	u32 lock_mask;
+	u32 flags;
+
+	const struct bcm2835_pll_ana_bits *ana;
+
+	unsigned long min_rate;
+	unsigned long max_rate;
+	/*
+	 * Highest rate for the VCO before we have to use the
+	 * pre-divide-by-2.
+	 */
+	unsigned long max_fb_rate;
+};
+
+struct bcm2835_pll_ana_bits {
+	u32 mask0;
+	u32 set0;
+	u32 mask1;
+	u32 set1;
+	u32 mask3;
+	u32 set3;
+	u32 fb_prediv_mask;
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
+	.mask0 = 0,
+	.set0 = 0,
+	.mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK,
+	.set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
+	.mask3 = A2W_PLL_KA_MASK,
+	.set3 = (2 << A2W_PLL_KA_SHIFT),
+	.fb_prediv_mask = BIT(14),
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
+	.mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK,
+	.set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
+	.mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK,
+	.set1 = (6 << A2W_PLLH_KP_SHIFT),
+	.mask3 = 0,
+	.set3 = 0,
+	.fb_prediv_mask = BIT(11),
+};
+
+struct bcm2835_pll_divider_data {
+	const char *name;
+	const char *source_pll;
+
+	u32 cm_reg;
+	u32 a2w_reg;
+
+	u32 load_mask;
+	u32 hold_mask;
+	u32 fixed_divider;
+	u32 flags;
+};
+
+struct bcm2835_clock_data {
+	const char *name;
+
+	const char *const *parents;
+	int num_mux_parents;
+
+	/* Bitmap encoding which parents accept rate change propagation. */
+	unsigned int set_rate_parent;
+
+	u32 ctl_reg;
+	u32 div_reg;
+
+	/* Number of integer bits in the divider */
+	u32 int_bits;
+	/* Number of fractional bits in the divider */
+	u32 frac_bits;
+
+	u32 flags;
+
+	bool is_vpu_clock;
+	bool is_mash_clock;
+	bool low_jitter;
+
+	u32 tcnt_mux;
+
+	bool round_up;
+};
+
+struct bcm2835_gate_data {
+	const char *name;
+	const char *parent;
+
+	u32 ctl_reg;
+};
+
+struct bcm2835_pll {
+	struct clk_hw hw;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_pll_data *data;
+};
+
+static int bcm2835_pll_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+
+	return cprman_read(cprman, data->a2w_ctrl_reg) &
+		A2W_PLL_CTRL_PRST_DISABLE;
+}
+
+static u32 bcm2835_pll_get_prediv_mask(struct bcm2835_cprman *cprman,
+				       const struct bcm2835_pll_data *data)
+{
+	/*
+	 * On BCM2711 there isn't a pre-divisor available in the PLL feedback
+	 * loop. Bits 13:14 of ANA1 (PLLA,PLLB,PLLC,PLLD) have been re-purposed
+	 * for to for VCO RANGE bits.
+	 */
+	if (cprman->soc & SOC_BCM2711)
+		return 0;
+
+	return data->ana->fb_prediv_mask;
+}
+
+static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
+					     unsigned long parent_rate,
+					     u32 *ndiv, u32 *fdiv)
+{
+	u64 div;
+
+	div = (u64)rate << A2W_PLL_FRAC_BITS;
+	do_div(div, parent_rate);
+
+	*ndiv = div >> A2W_PLL_FRAC_BITS;
+	*fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
+}
+
+static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
+					   u32 ndiv, u32 fdiv, u32 pdiv)
+{
+	u64 rate;
+
+	if (pdiv == 0)
+		return 0;
+
+	rate = (u64)parent_rate * ((ndiv << A2W_PLL_FRAC_BITS) + fdiv);
+	do_div(rate, pdiv);
+	return rate >> A2W_PLL_FRAC_BITS;
+}
+
+static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	const struct bcm2835_pll_data *data = pll->data;
+	u32 ndiv, fdiv;
+
+	rate = clamp(rate, data->min_rate, data->max_rate);
+
+	bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);
+
+	return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
+}
+
+static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);
+	u32 ndiv, pdiv, fdiv;
+	bool using_prediv;
+
+	if (parent_rate == 0)
+		return 0;
+
+	fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;
+	ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
+	pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
+	using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
+		       bcm2835_pll_get_prediv_mask(cprman, data);
+
+	if (using_prediv) {
+		ndiv *= 2;
+		fdiv *= 2;
+	}
+
+	return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv);
+}
+
+static void bcm2835_pll_off(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) |
+		     A2W_PLL_CTRL_PWRDN);
+	spin_unlock(&cprman->regs_lock);
+}
+
+static int bcm2835_pll_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	ktime_t timeout;
+
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) &
+		     ~A2W_PLL_CTRL_PWRDN);
+
+	/* Take the PLL out of reset. */
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->cm_ctrl_reg,
+		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+	spin_unlock(&cprman->regs_lock);
+
+	/* Wait for the PLL to lock. */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+				clk_hw_get_name(hw));
+			return -ETIMEDOUT;
+		}
+
+		cpu_relax();
+	}
+
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) |
+		     A2W_PLL_CTRL_PRST_DISABLE);
+
+	return 0;
+}
+
+static void
+bcm2835_pll_write_ana(struct bcm2835_cprman *cprman, u32 ana_reg_base, u32 *ana)
+{
+	int i;
+
+	/*
+	 * ANA register setup is done as a series of writes to
+	 * ANA3-ANA0, in that order.  This lets us write all 4
+	 * registers as a single cycle of the serdes interface (taking
+	 * 100 xosc clocks), whereas if we were to update ana0, 1, and
+	 * 3 individually through their partial-write registers, each
+	 * would be their own serdes cycle.
+	 */
+	for (i = 3; i >= 0; i--)
+		cprman_write(cprman, ana_reg_base + i * 4, ana[i]);
+}
+
+static int bcm2835_pll_set_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	u32 prediv_mask = bcm2835_pll_get_prediv_mask(cprman, data);
+	bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
+	u32 ndiv, fdiv, a2w_ctl;
+	u32 ana[4];
+	int i;
+
+	if (rate > data->max_fb_rate) {
+		use_fb_prediv = true;
+		rate /= 2;
+	} else {
+		use_fb_prediv = false;
+	}
+
+	bcm2835_pll_choose_ndiv_and_fdiv(rate, parent_rate, &ndiv, &fdiv);
+
+	for (i = 3; i >= 0; i--)
+		ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);
+
+	was_using_prediv = ana[1] & prediv_mask;
+
+	ana[0] &= ~data->ana->mask0;
+	ana[0] |= data->ana->set0;
+	ana[1] &= ~data->ana->mask1;
+	ana[1] |= data->ana->set1;
+	ana[3] &= ~data->ana->mask3;
+	ana[3] |= data->ana->set3;
+
+	if (was_using_prediv && !use_fb_prediv) {
+		ana[1] &= ~prediv_mask;
+		do_ana_setup_first = true;
+	} else if (!was_using_prediv && use_fb_prediv) {
+		ana[1] |= prediv_mask;
+		do_ana_setup_first = false;
+	} else {
+		do_ana_setup_first = true;
+	}
+
+	/* Unmask the reference clock from the oscillator. */
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, A2W_XOSC_CTRL,
+		     cprman_read(cprman, A2W_XOSC_CTRL) |
+		     data->reference_enable_mask);
+	spin_unlock(&cprman->regs_lock);
+
+	if (do_ana_setup_first)
+		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+	/* Set the PLL multiplier from the oscillator. */
+	cprman_write(cprman, data->frac_reg, fdiv);
+
+	a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);
+	a2w_ctl &= ~A2W_PLL_CTRL_NDIV_MASK;
+	a2w_ctl |= ndiv << A2W_PLL_CTRL_NDIV_SHIFT;
+	a2w_ctl &= ~A2W_PLL_CTRL_PDIV_MASK;
+	a2w_ctl |= 1 << A2W_PLL_CTRL_PDIV_SHIFT;
+	cprman_write(cprman, data->a2w_ctrl_reg, a2w_ctl);
+
+	if (!do_ana_setup_first)
+		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+	return 0;
+}
+
+static void bcm2835_pll_debug_init(struct clk_hw *hw,
+				  struct dentry *dentry)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	struct debugfs_reg32 *regs;
+
+	regs = devm_kcalloc(cprman->dev, 7, sizeof(*regs), GFP_KERNEL);
+	if (!regs)
+		return;
+
+	regs[0].name = "cm_ctrl";
+	regs[0].offset = data->cm_ctrl_reg;
+	regs[1].name = "a2w_ctrl";
+	regs[1].offset = data->a2w_ctrl_reg;
+	regs[2].name = "frac";
+	regs[2].offset = data->frac_reg;
+	regs[3].name = "ana0";
+	regs[3].offset = data->ana_reg_base + 0 * 4;
+	regs[4].name = "ana1";
+	regs[4].offset = data->ana_reg_base + 1 * 4;
+	regs[5].name = "ana2";
+	regs[5].offset = data->ana_reg_base + 2 * 4;
+	regs[6].name = "ana3";
+	regs[6].offset = data->ana_reg_base + 3 * 4;
+
+	bcm2835_debugfs_regset(cprman, 0, regs, 7, dentry);
+}
+
+static const struct clk_ops bcm2835_pll_clk_ops = {
+	.is_prepared = bcm2835_pll_is_on,
+	.prepare = bcm2835_pll_on,
+	.unprepare = bcm2835_pll_off,
+	.recalc_rate = bcm2835_pll_get_rate,
+	.set_rate = bcm2835_pll_set_rate,
+	.round_rate = bcm2835_pll_round_rate,
+	.debug_init = bcm2835_pll_debug_init,
+};
+
+struct bcm2835_pll_divider {
+	struct clk_divider div;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_pll_divider_data *data;
+};
+
+static struct bcm2835_pll_divider *
+bcm2835_pll_divider_from_hw(struct clk_hw *hw)
+{
+	return container_of(hw, struct bcm2835_pll_divider, div.hw);
+}
+
+static int bcm2835_pll_divider_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);
+}
+
+static int bcm2835_pll_divider_determine_rate(struct clk_hw *hw,
+					      struct clk_rate_request *req)
+{
+	return clk_divider_ops.determine_rate(hw, req);
+}
+
+static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static void bcm2835_pll_divider_off(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->cm_reg,
+		     (cprman_read(cprman, data->cm_reg) &
+		      ~data->load_mask) | data->hold_mask);
+	cprman_write(cprman, data->a2w_reg,
+		     cprman_read(cprman, data->a2w_reg) |
+		     A2W_PLL_CHANNEL_DISABLE);
+	spin_unlock(&cprman->regs_lock);
+}
+
+static int bcm2835_pll_divider_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->a2w_reg,
+		     cprman_read(cprman, data->a2w_reg) &
+		     ~A2W_PLL_CHANNEL_DISABLE);
+
+	cprman_write(cprman, data->cm_reg,
+		     cprman_read(cprman, data->cm_reg) & ~data->hold_mask);
+	spin_unlock(&cprman->regs_lock);
+
+	return 0;
+}
+
+static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
+					unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+	u32 cm, div, max_div = 1 << A2W_PLL_DIV_BITS;
+
+	div = DIV_ROUND_UP_ULL(parent_rate, rate);
+
+	div = min(div, max_div);
+	if (div == max_div)
+		div = 0;
+
+	cprman_write(cprman, data->a2w_reg, div);
+	cm = cprman_read(cprman, data->cm_reg);
+	cprman_write(cprman, data->cm_reg, cm | data->load_mask);
+	cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);
+
+	return 0;
+}
+
+static void bcm2835_pll_divider_debug_init(struct clk_hw *hw,
+					   struct dentry *dentry)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+	struct debugfs_reg32 *regs;
+
+	regs = devm_kcalloc(cprman->dev, 7, sizeof(*regs), GFP_KERNEL);
+	if (!regs)
+		return;
+
+	regs[0].name = "cm";
+	regs[0].offset = data->cm_reg;
+	regs[1].name = "a2w";
+	regs[1].offset = data->a2w_reg;
+
+	bcm2835_debugfs_regset(cprman, 0, regs, 2, dentry);
+}
+
+static const struct clk_ops bcm2835_pll_divider_clk_ops = {
+	.is_prepared = bcm2835_pll_divider_is_on,
+	.prepare = bcm2835_pll_divider_on,
+	.unprepare = bcm2835_pll_divider_off,
+	.recalc_rate = bcm2835_pll_divider_get_rate,
+	.set_rate = bcm2835_pll_divider_set_rate,
+	.determine_rate = bcm2835_pll_divider_determine_rate,
+	.debug_init = bcm2835_pll_divider_debug_init,
+};
+
+/*
+ * The CM dividers do fixed-point division, so we can't use the
+ * generic integer divider code like the PLL dividers do (and we can't
+ * fake it by having some fixed shifts preceding it in the clock tree,
+ * because we'd run out of bits in a 32-bit unsigned long).
+ */
+struct bcm2835_clock {
+	struct clk_hw hw;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_clock_data *data;
+};
+
+static struct bcm2835_clock *bcm2835_clock_from_hw(struct clk_hw *hw)
+{
+	return container_of(hw, struct bcm2835_clock, hw);
+}
+
+static int bcm2835_clock_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;
+}
+
+static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 unused_frac_mask =
+		GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1;
+	u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
+	u32 div, mindiv, maxdiv;
+
+	do_div(temp, rate);
+	div = temp;
+	div &= ~unused_frac_mask;
+
+	/* different clamping limits apply for a mash clock */
+	if (data->is_mash_clock) {
+		/* clamp to min divider of 2 */
+		mindiv = 2 << CM_DIV_FRAC_BITS;
+		/* clamp to the highest possible integer divider */
+		maxdiv = (BIT(data->int_bits) - 1) << CM_DIV_FRAC_BITS;
+	} else {
+		/* clamp to min divider of 1 */
+		mindiv = 1 << CM_DIV_FRAC_BITS;
+		/* clamp to the highest possible fractional divider */
+		maxdiv = GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
+				 CM_DIV_FRAC_BITS - data->frac_bits);
+	}
+
+	/* apply the clamping  limits */
+	div = max_t(u32, div, mindiv);
+	div = min_t(u32, div, maxdiv);
+
+	return div;
+}
+
+static unsigned long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+						     unsigned long parent_rate,
+						     u32 div)
+{
+	const struct bcm2835_clock_data *data = clock->data;
+	u64 temp;
+
+	if (data->int_bits == 0 && data->frac_bits == 0)
+		return parent_rate;
+
+	/*
+	 * The divisor is a 12.12 fixed point field, but only some of
+	 * the bits are populated in any given clock.
+	 */
+	div >>= CM_DIV_FRAC_BITS - data->frac_bits;
+	div &= (1 << (data->int_bits + data->frac_bits)) - 1;
+
+	if (div == 0)
+		return 0;
+
+	temp = (u64)parent_rate << data->frac_bits;
+
+	do_div(temp, div);
+
+	return temp;
+}
+
+static unsigned long bcm2835_round_rate(unsigned long rate)
+{
+	unsigned long scaler;
+	unsigned long limit;
+
+	limit = rate / 100000;
+
+	scaler = 1;
+	while (scaler < limit)
+		scaler *= 10;
+
+	/*
+	 * If increasing a clock by less than 0.1% changes it
+	 * from ..999.. to ..000.., round up.
+	 */
+	if ((rate + scaler - 1) / scaler % 1000 == 0)
+		rate = roundup(rate, scaler);
+
+	return rate;
+}
+
+static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	unsigned long rate;
+	u32 div;
+
+	if (data->int_bits == 0 && data->frac_bits == 0)
+		return parent_rate;
+
+	div = cprman_read(cprman, data->div_reg);
+
+	rate = bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+
+	if (data->round_up)
+		rate = bcm2835_round_rate(rate);
+
+	return rate;
+}
+
+static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
+{
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	ktime_t timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+
+	while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+				clk_hw_get_name(&clock->hw));
+			return;
+		}
+		cpu_relax();
+	}
+}
+
+static void bcm2835_clock_off(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->ctl_reg,
+		     cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);
+	spin_unlock(&cprman->regs_lock);
+
+	/* BUSY will remain high until the divider completes its cycle. */
+	bcm2835_clock_wait_busy(clock);
+}
+
+static int bcm2835_clock_on(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->ctl_reg,
+		     cprman_read(cprman, data->ctl_reg) |
+		     CM_ENABLE |
+		     CM_GATE);
+	spin_unlock(&cprman->regs_lock);
+
+	/* Debug code to measure the clock once it's turned on to see
+	 * if it's ticking at the rate we expect.
+	 */
+	if (data->tcnt_mux && false) {
+		dev_info(cprman->dev,
+			 "clk %s: rate %ld, measure %ld\n",
+			 data->name,
+			 clk_hw_get_rate(hw),
+			 bcm2835_measure_tcnt_mux(cprman, data->tcnt_mux));
+	}
+
+	return 0;
+}
+
+static int bcm2835_clock_set_rate(struct clk_hw *hw,
+				  unsigned long rate, unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
+	u32 ctl;
+
+	spin_lock(&cprman->regs_lock);
+
+	/*
+	 * Setting up frac support
+	 *
+	 * In principle it is recommended to stop/start the clock first,
+	 * but as we set CLK_SET_RATE_GATE during registration of the
+	 * clock this requirement should be take care of by the
+	 * clk-framework.
+	 */
+	ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC;
+	ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
+	cprman_write(cprman, data->ctl_reg, ctl);
+
+	cprman_write(cprman, data->div_reg, div);
+
+	spin_unlock(&cprman->regs_lock);
+
+	return 0;
+}
+
+static bool
+bcm2835_clk_is_pllc(struct clk_hw *hw)
+{
+	if (!hw)
+		return false;
+
+	return strncmp(clk_hw_get_name(hw), "pllc", 4) == 0;
+}
+
+static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw,
+							int parent_idx,
+							unsigned long rate,
+							u32 *div,
+							unsigned long *prate,
+							unsigned long *avgrate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	unsigned long best_rate = 0;
+	u32 curdiv, mindiv, maxdiv;
+	struct clk_hw *parent;
+
+	parent = clk_hw_get_parent_by_index(hw, parent_idx);
+
+	if (!(BIT(parent_idx) & data->set_rate_parent)) {
+		*prate = clk_hw_get_rate(parent);
+		*div = bcm2835_clock_choose_div(hw, rate, *prate);
+
+		*avgrate = bcm2835_clock_rate_from_divisor(clock, *prate, *div);
+
+		if (data->low_jitter && (*div & CM_DIV_FRAC_MASK)) {
+			unsigned long high, low;
+			u32 int_div = *div & ~CM_DIV_FRAC_MASK;
+
+			high = bcm2835_clock_rate_from_divisor(clock, *prate,
+							       int_div);
+			int_div += CM_DIV_FRAC_MASK + 1;
+			low = bcm2835_clock_rate_from_divisor(clock, *prate,
+							      int_div);
+
+			/*
+			 * Return a value which is the maximum deviation
+			 * below the ideal rate, for use as a metric.
+			 */
+			return *avgrate - max(*avgrate - low, high - *avgrate);
+		}
+		return *avgrate;
+	}
+
+	if (data->frac_bits)
+		dev_warn(cprman->dev,
+			"frac bits are not used when propagating rate change");
+
+	/* clamp to min divider of 2 if we're dealing with a mash clock */
+	mindiv = data->is_mash_clock ? 2 : 1;
+	maxdiv = BIT(data->int_bits) - 1;
+
+	/* TODO: Be smart, and only test a subset of the available divisors. */
+	for (curdiv = mindiv; curdiv <= maxdiv; curdiv++) {
+		unsigned long tmp_rate;
+
+		tmp_rate = clk_hw_round_rate(parent, rate * curdiv);
+		tmp_rate /= curdiv;
+		if (curdiv == mindiv ||
+		    (tmp_rate > best_rate && tmp_rate <= rate))
+			best_rate = tmp_rate;
+
+		if (best_rate == rate)
+			break;
+	}
+
+	*div = curdiv << CM_DIV_FRAC_BITS;
+	*prate = curdiv * best_rate;
+	*avgrate = best_rate;
+
+	return best_rate;
+}
+
+static int bcm2835_clock_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
+{
+	struct clk_hw *parent, *best_parent = NULL;
+	bool current_parent_is_pllc;
+	unsigned long rate, best_rate = 0;
+	unsigned long prate, best_prate = 0;
+	unsigned long avgrate, best_avgrate = 0;
+	size_t i;
+	u32 div;
+
+	current_parent_is_pllc = bcm2835_clk_is_pllc(clk_hw_get_parent(hw));
+
+	/*
+	 * Select parent clock that results in the closest but lower rate
+	 */
+	for (i = 0; i < clk_hw_get_num_parents(hw); ++i) {
+		parent = clk_hw_get_parent_by_index(hw, i);
+		if (!parent)
+			continue;
+
+		/*
+		 * Don't choose a PLLC-derived clock as our parent
+		 * unless it had been manually set that way.  PLLC's
+		 * frequency gets adjusted by the firmware due to
+		 * over-temp or under-voltage conditions, without
+		 * prior notification to our clock consumer.
+		 */
+		if (bcm2835_clk_is_pllc(parent) && !current_parent_is_pllc)
+			continue;
+
+		rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate,
+							  &div, &prate,
+							  &avgrate);
+		if (abs(req->rate - rate) < abs(req->rate - best_rate)) {
+			best_parent = parent;
+			best_prate = prate;
+			best_rate = rate;
+			best_avgrate = avgrate;
+		}
+	}
+
+	if (!best_parent)
+		return -EINVAL;
+
+	req->best_parent_hw = best_parent;
+	req->best_parent_rate = best_prate;
+
+	req->rate = best_avgrate;
+
+	return 0;
+}
+
+static int bcm2835_clock_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u8 src = (index << CM_SRC_SHIFT) & CM_SRC_MASK;
+
+	cprman_write(cprman, data->ctl_reg, src);
+	return 0;
+}
+
+static u8 bcm2835_clock_get_parent(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 src = cprman_read(cprman, data->ctl_reg);
+
+	return (src & CM_SRC_MASK) >> CM_SRC_SHIFT;
+}
+
+static const struct debugfs_reg32 bcm2835_debugfs_clock_reg32[] = {
+	{
+		.name = "ctl",
+		.offset = 0,
+	},
+	{
+		.name = "div",
+		.offset = 4,
+	},
+};
+
+static void bcm2835_clock_debug_init(struct clk_hw *hw,
+				    struct dentry *dentry)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	bcm2835_debugfs_regset(cprman, data->ctl_reg,
+		bcm2835_debugfs_clock_reg32,
+		ARRAY_SIZE(bcm2835_debugfs_clock_reg32),
+		dentry);
+}
+
+static const struct clk_ops bcm2835_clock_clk_ops = {
+	.is_prepared = bcm2835_clock_is_on,
+	.prepare = bcm2835_clock_on,
+	.unprepare = bcm2835_clock_off,
+	.recalc_rate = bcm2835_clock_get_rate,
+	.set_rate = bcm2835_clock_set_rate,
+	.determine_rate = bcm2835_clock_determine_rate,
+	.set_parent = bcm2835_clock_set_parent,
+	.get_parent = bcm2835_clock_get_parent,
+	.debug_init = bcm2835_clock_debug_init,
+};
+
+static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
+{
+	return true;
+}
+
+/*
+ * The VPU clock can never be disabled (it doesn't have an ENABLE
+ * bit), so it gets its own set of clock ops.
+ */
+static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
+	.is_prepared = bcm2835_vpu_clock_is_on,
+	.recalc_rate = bcm2835_clock_get_rate,
+	.set_rate = bcm2835_clock_set_rate,
+	.determine_rate = bcm2835_clock_determine_rate,
+	.set_parent = bcm2835_clock_set_parent,
+	.get_parent = bcm2835_clock_get_parent,
+	.debug_init = bcm2835_clock_debug_init,
+};
+
+static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
+					   const void *data)
+{
+	const struct bcm2835_pll_data *pll_data = data;
+	struct bcm2835_pll *pll;
+	struct clk_init_data init;
+	int ret;
+
+	memset(&init, 0, sizeof(init));
+
+	/* All of the PLLs derive from the external oscillator. */
+	init.parent_names = &cprman->real_parent_names[0];
+	init.num_parents = 1;
+	init.name = pll_data->name;
+	init.ops = &bcm2835_pll_clk_ops;
+	init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return NULL;
+
+	pll->cprman = cprman;
+	pll->data = pll_data;
+	pll->hw.init = &init;
+
+	ret = devm_clk_hw_register(cprman->dev, &pll->hw);
+	if (ret) {
+		kfree(pll);
+		return NULL;
+	}
+	return &pll->hw;
+}
+
+static struct clk_hw *
+bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
+			     const void *data)
+{
+	const struct bcm2835_pll_divider_data *divider_data = data;
+	struct bcm2835_pll_divider *divider;
+	struct clk_init_data init;
+	const char *divider_name;
+	int ret;
+
+	if (divider_data->fixed_divider != 1) {
+		divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
+					      "%s_prediv", divider_data->name);
+		if (!divider_name)
+			return NULL;
+	} else {
+		divider_name = divider_data->name;
+	}
+
+	memset(&init, 0, sizeof(init));
+
+	init.parent_names = &divider_data->source_pll;
+	init.num_parents = 1;
+	init.name = divider_name;
+	init.ops = &bcm2835_pll_divider_clk_ops;
+	init.flags = divider_data->flags | CLK_IGNORE_UNUSED;
+
+	divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
+	if (!divider)
+		return NULL;
+
+	divider->div.reg = cprman->regs + divider_data->a2w_reg;
+	divider->div.shift = A2W_PLL_DIV_SHIFT;
+	divider->div.width = A2W_PLL_DIV_BITS;
+	divider->div.flags = CLK_DIVIDER_MAX_AT_ZERO;
+	divider->div.lock = &cprman->regs_lock;
+	divider->div.hw.init = &init;
+	divider->div.table = NULL;
+
+	divider->cprman = cprman;
+	divider->data = divider_data;
+
+	ret = devm_clk_hw_register(cprman->dev, &divider->div.hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	/*
+	 * PLLH's channels have a fixed divide by 10 afterwards, which
+	 * is what our consumers are actually using.
+	 */
+	if (divider_data->fixed_divider != 1) {
+		return clk_hw_register_fixed_factor(cprman->dev,
+						    divider_data->name,
+						    divider_name,
+						    CLK_SET_RATE_PARENT,
+						    1,
+						    divider_data->fixed_divider);
+	}
+
+	return &divider->div.hw;
+}
+
+static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
+					     const void *data)
+{
+	const struct bcm2835_clock_data *clock_data = data;
+	struct bcm2835_clock *clock;
+	struct clk_init_data init;
+	const char *parents[1 << CM_SRC_BITS];
+	size_t i;
+	int ret;
+
+	/*
+	 * Replace our strings referencing parent clocks with the
+	 * actual clock-output-name of the parent.
+	 */
+	for (i = 0; i < clock_data->num_mux_parents; i++) {
+		parents[i] = clock_data->parents[i];
+
+		ret = match_string(cprman_parent_names,
+				   ARRAY_SIZE(cprman_parent_names),
+				   parents[i]);
+		if (ret >= 0)
+			parents[i] = cprman->real_parent_names[ret];
+	}
+
+	memset(&init, 0, sizeof(init));
+	init.parent_names = parents;
+	init.num_parents = clock_data->num_mux_parents;
+	init.name = clock_data->name;
+	init.flags = clock_data->flags | CLK_IGNORE_UNUSED;
+
+	/*
+	 * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate
+	 * rate changes on at least of the parents.
+	 */
+	if (clock_data->set_rate_parent)
+		init.flags |= CLK_SET_RATE_PARENT;
+
+	if (clock_data->is_vpu_clock) {
+		init.ops = &bcm2835_vpu_clock_clk_ops;
+	} else {
+		init.ops = &bcm2835_clock_clk_ops;
+		init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+		/* If the clock wasn't actually enabled at boot, it's not
+		 * critical.
+		 */
+		if (!(cprman_read(cprman, clock_data->ctl_reg) & CM_ENABLE))
+			init.flags &= ~CLK_IS_CRITICAL;
+	}
+
+	clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL);
+	if (!clock)
+		return NULL;
+
+	clock->cprman = cprman;
+	clock->data = clock_data;
+	clock->hw.init = &init;
+
+	ret = devm_clk_hw_register(cprman->dev, &clock->hw);
+	if (ret)
+		return ERR_PTR(ret);
+	return &clock->hw;
+}
+
+static struct clk_hw *bcm2835_register_gate(struct bcm2835_cprman *cprman,
+					    const void *data)
+{
+	const struct bcm2835_gate_data *gate_data = data;
+
+	return clk_hw_register_gate(cprman->dev, gate_data->name,
+				    gate_data->parent,
+				    CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+				    cprman->regs + gate_data->ctl_reg,
+				    CM_GATE_BIT, 0, &cprman->regs_lock);
+}
+
+struct bcm2835_clk_desc {
+	struct clk_hw *(*clk_register)(struct bcm2835_cprman *cprman,
+				       const void *data);
+	unsigned int supported;
+	const void *data;
+};
+
+/* assignment helper macros for different clock types */
+#define _REGISTER(f, s, ...) { .clk_register = f, \
+			       .supported = s,				\
+			       .data = __VA_ARGS__ }
+#define REGISTER_PLL(s, ...)	_REGISTER(&bcm2835_register_pll,	\
+					  s,				\
+					  &(struct bcm2835_pll_data)	\
+					  {__VA_ARGS__})
+#define REGISTER_PLL_DIV(s, ...) _REGISTER(&bcm2835_register_pll_divider, \
+					   s,				  \
+					   &(struct bcm2835_pll_divider_data) \
+					   {__VA_ARGS__})
+#define REGISTER_CLK(s, ...)	_REGISTER(&bcm2835_register_clock,	\
+					  s,				\
+					  &(struct bcm2835_clock_data)	\
+					  {__VA_ARGS__})
+#define REGISTER_GATE(s, ...)	_REGISTER(&bcm2835_register_gate,	\
+					  s,				\
+					  &(struct bcm2835_gate_data)	\
+					  {__VA_ARGS__})
+
+/* parent mux arrays plus helper macros */
+
+/* main oscillator parent mux */
+static const char *const bcm2835_clock_osc_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1"
+};
+
+#define REGISTER_OSC_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),	\
+	.parents = bcm2835_clock_osc_parents,				\
+	__VA_ARGS__)
+
+/* main peripherial parent mux */
+static const char *const bcm2835_clock_per_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"plla_per",
+	"pllc_per",
+	"plld_per",
+	"pllh_aux",
+};
+
+#define REGISTER_PER_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),	\
+	.parents = bcm2835_clock_per_parents,				\
+	__VA_ARGS__)
+
+/*
+ * Restrict clock sources for the PCM peripheral to the oscillator and
+ * PLLD_PER because other source may have varying rates or be switched
+ * off.
+ *
+ * Prevent other sources from being selected by replacing their names in
+ * the list of potential parents with dummy entries (entry index is
+ * significant).
+ */
+static const char *const bcm2835_pcm_per_parents[] = {
+	"-",
+	"xosc",
+	"-",
+	"-",
+	"-",
+	"-",
+	"plld_per",
+	"-",
+};
+
+#define REGISTER_PCM_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_pcm_per_parents),		\
+	.parents = bcm2835_pcm_per_parents,				\
+	__VA_ARGS__)
+
+/* main vpu parent mux */
+static const char *const bcm2835_clock_vpu_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"plla_core",
+	"pllc_core0",
+	"plld_core",
+	"pllh_aux",
+	"pllc_core1",
+	"pllc_core2",
+};
+
+#define REGISTER_VPU_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),	\
+	.parents = bcm2835_clock_vpu_parents,				\
+	__VA_ARGS__)
+
+/*
+ * DSI parent clocks.  The DSI byte/DDR/DDR2 clocks come from the DSI
+ * analog PHY.  The _inv variants are generated internally to cprman,
+ * but we don't use them so they aren't hooked up.
+ */
+static const char *const bcm2835_clock_dsi0_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"dsi0_ddr",
+	"dsi0_ddr_inv",
+	"dsi0_ddr2",
+	"dsi0_ddr2_inv",
+	"dsi0_byte",
+	"dsi0_byte_inv",
+};
+
+static const char *const bcm2835_clock_dsi1_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"dsi1_ddr",
+	"dsi1_ddr_inv",
+	"dsi1_ddr2",
+	"dsi1_ddr2_inv",
+	"dsi1_byte",
+	"dsi1_byte_inv",
+};
+
+#define REGISTER_DSI0_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi0_parents),	\
+	.parents = bcm2835_clock_dsi0_parents,				\
+	__VA_ARGS__)
+
+#define REGISTER_DSI1_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi1_parents),	\
+	.parents = bcm2835_clock_dsi1_parents,				\
+	__VA_ARGS__)
+
+/*
+ * the real definition of all the pll, pll_dividers and clocks
+ * these make use of the above REGISTER_* macros
+ */
+static const struct bcm2835_clk_desc clk_desc_array[] = {
+	/* the PLL + PLL dividers */
+
+	/*
+	 * PLLA is the auxiliary PLL, used to drive the CCP2
+	 * (Compact Camera Port 2) transmitter clock.
+	 *
+	 * It is in the PX LDO power domain, which is on when the
+	 * AUDIO domain is on.
+	 */
+	[BCM2835_PLLA]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "plla",
+		.cm_ctrl_reg = CM_PLLA,
+		.a2w_ctrl_reg = A2W_PLLA_CTRL,
+		.frac_reg = A2W_PLLA_FRAC,
+		.ana_reg_base = A2W_PLLA_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKA,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 2400000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLA_CORE]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plla_core",
+		.source_pll = "plla",
+		.cm_reg = CM_PLLA,
+		.a2w_reg = A2W_PLLA_CORE,
+		.load_mask = CM_PLLA_LOADCORE,
+		.hold_mask = CM_PLLA_HOLDCORE,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLA_PER]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plla_per",
+		.source_pll = "plla",
+		.cm_reg = CM_PLLA,
+		.a2w_reg = A2W_PLLA_PER,
+		.load_mask = CM_PLLA_LOADPER,
+		.hold_mask = CM_PLLA_HOLDPER,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLA_DSI0]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plla_dsi0",
+		.source_pll = "plla",
+		.cm_reg = CM_PLLA,
+		.a2w_reg = A2W_PLLA_DSI0,
+		.load_mask = CM_PLLA_LOADDSI0,
+		.hold_mask = CM_PLLA_HOLDDSI0,
+		.fixed_divider = 1),
+	[BCM2835_PLLA_CCP2]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plla_ccp2",
+		.source_pll = "plla",
+		.cm_reg = CM_PLLA,
+		.a2w_reg = A2W_PLLA_CCP2,
+		.load_mask = CM_PLLA_LOADCCP2,
+		.hold_mask = CM_PLLA_HOLDCCP2,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+
+	/* PLLB is used for the ARM's clock. */
+	[BCM2835_PLLB]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "pllb",
+		.cm_ctrl_reg = CM_PLLB,
+		.a2w_ctrl_reg = A2W_PLLB_CTRL,
+		.frac_reg = A2W_PLLB_FRAC,
+		.ana_reg_base = A2W_PLLB_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKB,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE,
+		.flags = CLK_GET_RATE_NOCACHE),
+	[BCM2835_PLLB_ARM]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllb_arm",
+		.source_pll = "pllb",
+		.cm_reg = CM_PLLB,
+		.a2w_reg = A2W_PLLB_ARM,
+		.load_mask = CM_PLLB_LOADARM,
+		.hold_mask = CM_PLLB_HOLDARM,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE),
+
+	/*
+	 * PLLC is the core PLL, used to drive the core VPU clock.
+	 *
+	 * It is in the PX LDO power domain, which is on when the
+	 * AUDIO domain is on.
+	 */
+	[BCM2835_PLLC]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "pllc",
+		.cm_ctrl_reg = CM_PLLC,
+		.a2w_ctrl_reg = A2W_PLLC_CTRL,
+		.frac_reg = A2W_PLLC_FRAC,
+		.ana_reg_base = A2W_PLLC_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKC,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLC_CORE0]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllc_core0",
+		.source_pll = "pllc",
+		.cm_reg = CM_PLLC,
+		.a2w_reg = A2W_PLLC_CORE0,
+		.load_mask = CM_PLLC_LOADCORE0,
+		.hold_mask = CM_PLLC_HOLDCORE0,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLC_CORE1]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllc_core1",
+		.source_pll = "pllc",
+		.cm_reg = CM_PLLC,
+		.a2w_reg = A2W_PLLC_CORE1,
+		.load_mask = CM_PLLC_LOADCORE1,
+		.hold_mask = CM_PLLC_HOLDCORE1,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLC_CORE2]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllc_core2",
+		.source_pll = "pllc",
+		.cm_reg = CM_PLLC,
+		.a2w_reg = A2W_PLLC_CORE2,
+		.load_mask = CM_PLLC_LOADCORE2,
+		.hold_mask = CM_PLLC_HOLDCORE2,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLC_PER]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllc_per",
+		.source_pll = "pllc",
+		.cm_reg = CM_PLLC,
+		.a2w_reg = A2W_PLLC_PER,
+		.load_mask = CM_PLLC_LOADPER,
+		.hold_mask = CM_PLLC_HOLDPER,
+		.fixed_divider = 1,
+		.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
+
+	/*
+	 * PLLD is the display PLL, used to drive DSI display panels.
+	 *
+	 * It is in the PX LDO power domain, which is on when the
+	 * AUDIO domain is on.
+	 */
+	[BCM2835_PLLD]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "plld",
+		.cm_ctrl_reg = CM_PLLD,
+		.a2w_ctrl_reg = A2W_PLLD_CTRL,
+		.frac_reg = A2W_PLLD_FRAC,
+		.ana_reg_base = A2W_PLLD_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKD,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 2400000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLD_CORE]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plld_core",
+		.source_pll = "plld",
+		.cm_reg = CM_PLLD,
+		.a2w_reg = A2W_PLLD_CORE,
+		.load_mask = CM_PLLD_LOADCORE,
+		.hold_mask = CM_PLLD_HOLDCORE,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	/*
+	 * VPU firmware assumes that PLLD_PER isn't disabled by the ARM core.
+	 * Otherwise this could cause firmware lookups. That's why we mark
+	 * it as critical.
+	 */
+	[BCM2835_PLLD_PER]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plld_per",
+		.source_pll = "plld",
+		.cm_reg = CM_PLLD,
+		.a2w_reg = A2W_PLLD_PER,
+		.load_mask = CM_PLLD_LOADPER,
+		.hold_mask = CM_PLLD_HOLDPER,
+		.fixed_divider = 1,
+		.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
+	[BCM2835_PLLD_DSI0]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plld_dsi0",
+		.source_pll = "plld",
+		.cm_reg = CM_PLLD,
+		.a2w_reg = A2W_PLLD_DSI0,
+		.load_mask = CM_PLLD_LOADDSI0,
+		.hold_mask = CM_PLLD_HOLDDSI0,
+		.fixed_divider = 1),
+	[BCM2835_PLLD_DSI1]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plld_dsi1",
+		.source_pll = "plld",
+		.cm_reg = CM_PLLD,
+		.a2w_reg = A2W_PLLD_DSI1,
+		.load_mask = CM_PLLD_LOADDSI1,
+		.hold_mask = CM_PLLD_HOLDDSI1,
+		.fixed_divider = 1),
+
+	/*
+	 * PLLH is used to supply the pixel clock or the AUX clock for the
+	 * TV encoder.
+	 *
+	 * It is in the HDMI power domain.
+	 */
+	[BCM2835_PLLH]		= REGISTER_PLL(
+		SOC_BCM2835,
+		"pllh",
+		.cm_ctrl_reg = CM_PLLH,
+		.a2w_ctrl_reg = A2W_PLLH_CTRL,
+		.frac_reg = A2W_PLLH_FRAC,
+		.ana_reg_base = A2W_PLLH_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKH,
+
+		.ana = &bcm2835_ana_pllh,
+
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLH_RCAL]	= REGISTER_PLL_DIV(
+		SOC_BCM2835,
+		.name = "pllh_rcal",
+		.source_pll = "pllh",
+		.cm_reg = CM_PLLH,
+		.a2w_reg = A2W_PLLH_RCAL,
+		.load_mask = CM_PLLH_LOADRCAL,
+		.hold_mask = 0,
+		.fixed_divider = 10,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLH_AUX]	= REGISTER_PLL_DIV(
+		SOC_BCM2835,
+		.name = "pllh_aux",
+		.source_pll = "pllh",
+		.cm_reg = CM_PLLH,
+		.a2w_reg = A2W_PLLH_AUX,
+		.load_mask = CM_PLLH_LOADAUX,
+		.hold_mask = 0,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLH_PIX]	= REGISTER_PLL_DIV(
+		SOC_BCM2835,
+		.name = "pllh_pix",
+		.source_pll = "pllh",
+		.cm_reg = CM_PLLH,
+		.a2w_reg = A2W_PLLH_PIX,
+		.load_mask = CM_PLLH_LOADPIX,
+		.hold_mask = 0,
+		.fixed_divider = 10,
+		.flags = CLK_SET_RATE_PARENT),
+
+	/* the clocks */
+
+	/* clocks with oscillator parent mux */
+
+	/* One Time Programmable Memory clock.  Maximum 10Mhz. */
+	[BCM2835_CLOCK_OTP]	= REGISTER_OSC_CLK(
+		SOC_ALL,
+		.name = "otp",
+		.ctl_reg = CM_OTPCTL,
+		.div_reg = CM_OTPDIV,
+		.int_bits = 4,
+		.frac_bits = 0,
+		.tcnt_mux = 6),
+	/*
+	 * Used for a 1Mhz clock for the system clocksource, and also used
+	 * bythe watchdog timer and the camera pulse generator.
+	 */
+	[BCM2835_CLOCK_TIMER]	= REGISTER_OSC_CLK(
+		SOC_ALL,
+		.name = "timer",
+		.ctl_reg = CM_TIMERCTL,
+		.div_reg = CM_TIMERDIV,
+		.int_bits = 6,
+		.frac_bits = 12),
+	/*
+	 * Clock for the temperature sensor.
+	 * Generally run at 2Mhz, max 5Mhz.
+	 */
+	[BCM2835_CLOCK_TSENS]	= REGISTER_OSC_CLK(
+		SOC_ALL,
+		.name = "tsens",
+		.ctl_reg = CM_TSENSCTL,
+		.div_reg = CM_TSENSDIV,
+		.int_bits = 5,
+		.frac_bits = 0),
+	[BCM2835_CLOCK_TEC]	= REGISTER_OSC_CLK(
+		SOC_ALL,
+		.name = "tec",
+		.ctl_reg = CM_TECCTL,
+		.div_reg = CM_TECDIV,
+		.int_bits = 6,
+		.frac_bits = 0),
+
+	/* clocks with vpu parent mux */
+	[BCM2835_CLOCK_H264]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "h264",
+		.ctl_reg = CM_H264CTL,
+		.div_reg = CM_H264DIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 1),
+	[BCM2835_CLOCK_ISP]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "isp",
+		.ctl_reg = CM_ISPCTL,
+		.div_reg = CM_ISPDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 2),
+
+	/*
+	 * Secondary SDRAM clock.  Used for low-voltage modes when the PLL
+	 * in the SDRAM controller can't be used.
+	 */
+	[BCM2835_CLOCK_SDRAM]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "sdram",
+		.ctl_reg = CM_SDCCTL,
+		.div_reg = CM_SDCDIV,
+		.int_bits = 6,
+		.frac_bits = 0,
+		.tcnt_mux = 3),
+	[BCM2835_CLOCK_V3D]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "v3d",
+		.ctl_reg = CM_V3DCTL,
+		.div_reg = CM_V3DDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 4),
+	/*
+	 * VPU clock.  This doesn't have an enable bit, since it drives
+	 * the bus for everything else, and is special so it doesn't need
+	 * to be gated for rate changes.  It is also known as "clk_audio"
+	 * in various hardware documentation.
+	 */
+	[BCM2835_CLOCK_VPU]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "vpu",
+		.ctl_reg = CM_VPUCTL,
+		.div_reg = CM_VPUDIV,
+		.int_bits = 12,
+		.frac_bits = 8,
+		.flags = CLK_IS_CRITICAL,
+		.is_vpu_clock = true,
+		.tcnt_mux = 5),
+
+	/* clocks with per parent mux */
+	[BCM2835_CLOCK_AVEO]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "aveo",
+		.ctl_reg = CM_AVEOCTL,
+		.div_reg = CM_AVEODIV,
+		.int_bits = 4,
+		.frac_bits = 0,
+		.tcnt_mux = 38),
+	[BCM2835_CLOCK_CAM0]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "cam0",
+		.ctl_reg = CM_CAM0CTL,
+		.div_reg = CM_CAM0DIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 14),
+	[BCM2835_CLOCK_CAM1]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "cam1",
+		.ctl_reg = CM_CAM1CTL,
+		.div_reg = CM_CAM1DIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 15),
+	[BCM2835_CLOCK_DFT]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "dft",
+		.ctl_reg = CM_DFTCTL,
+		.div_reg = CM_DFTDIV,
+		.int_bits = 5,
+		.frac_bits = 0),
+	[BCM2835_CLOCK_DPI]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "dpi",
+		.ctl_reg = CM_DPICTL,
+		.div_reg = CM_DPIDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 17),
+
+	/* Arasan EMMC clock */
+	[BCM2835_CLOCK_EMMC]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "emmc",
+		.ctl_reg = CM_EMMCCTL,
+		.div_reg = CM_EMMCDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 39),
+
+	/* EMMC2 clock (only available for BCM2711) */
+	[BCM2711_CLOCK_EMMC2]	= REGISTER_PER_CLK(
+		SOC_BCM2711,
+		.name = "emmc2",
+		.ctl_reg = CM_EMMC2CTL,
+		.div_reg = CM_EMMC2DIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 42),
+
+	/* General purpose (GPIO) clocks */
+	[BCM2835_CLOCK_GP0]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "gp0",
+		.ctl_reg = CM_GP0CTL,
+		.div_reg = CM_GP0DIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.is_mash_clock = true,
+		.tcnt_mux = 20),
+	[BCM2835_CLOCK_GP1]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "gp1",
+		.ctl_reg = CM_GP1CTL,
+		.div_reg = CM_GP1DIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.flags = CLK_IS_CRITICAL,
+		.is_mash_clock = true,
+		.tcnt_mux = 21),
+	[BCM2835_CLOCK_GP2]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "gp2",
+		.ctl_reg = CM_GP2CTL,
+		.div_reg = CM_GP2DIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.flags = CLK_IS_CRITICAL),
+
+	/* HDMI state machine */
+	[BCM2835_CLOCK_HSM]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "hsm",
+		.ctl_reg = CM_HSMCTL,
+		.div_reg = CM_HSMDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 22),
+	[BCM2835_CLOCK_PCM]	= REGISTER_PCM_CLK(
+		SOC_ALL,
+		.name = "pcm",
+		.ctl_reg = CM_PCMCTL,
+		.div_reg = CM_PCMDIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.is_mash_clock = true,
+		.low_jitter = true,
+		.tcnt_mux = 23),
+	[BCM2835_CLOCK_PWM]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "pwm",
+		.ctl_reg = CM_PWMCTL,
+		.div_reg = CM_PWMDIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.is_mash_clock = true,
+		.tcnt_mux = 24),
+	[BCM2835_CLOCK_SLIM]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "slim",
+		.ctl_reg = CM_SLIMCTL,
+		.div_reg = CM_SLIMDIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.is_mash_clock = true,
+		.tcnt_mux = 25),
+	[BCM2835_CLOCK_SMI]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "smi",
+		.ctl_reg = CM_SMICTL,
+		.div_reg = CM_SMIDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 27),
+	[BCM2835_CLOCK_UART]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "uart",
+		.ctl_reg = CM_UARTCTL,
+		.div_reg = CM_UARTDIV,
+		.int_bits = 10,
+		.frac_bits = 12,
+		.tcnt_mux = 28,
+		.round_up = true),
+
+	/* TV encoder clock.  Only operating frequency is 108Mhz.  */
+	[BCM2835_CLOCK_VEC]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "vec",
+		.ctl_reg = CM_VECCTL,
+		.div_reg = CM_VECDIV,
+		.int_bits = 4,
+		.frac_bits = 0,
+		/*
+		 * Allow rate change propagation only on PLLH_AUX which is
+		 * assigned index 7 in the parent array.
+		 */
+		.set_rate_parent = BIT(7),
+		.tcnt_mux = 29),
+
+	/* dsi clocks */
+	[BCM2835_CLOCK_DSI0E]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "dsi0e",
+		.ctl_reg = CM_DSI0ECTL,
+		.div_reg = CM_DSI0EDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 18),
+	[BCM2835_CLOCK_DSI1E]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "dsi1e",
+		.ctl_reg = CM_DSI1ECTL,
+		.div_reg = CM_DSI1EDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 19),
+	[BCM2835_CLOCK_DSI0P]	= REGISTER_DSI0_CLK(
+		SOC_ALL,
+		.name = "dsi0p",
+		.ctl_reg = CM_DSI0PCTL,
+		.div_reg = CM_DSI0PDIV,
+		.int_bits = 0,
+		.frac_bits = 0,
+		.tcnt_mux = 12),
+	[BCM2835_CLOCK_DSI1P]	= REGISTER_DSI1_CLK(
+		SOC_ALL,
+		.name = "dsi1p",
+		.ctl_reg = CM_DSI1PCTL,
+		.div_reg = CM_DSI1PDIV,
+		.int_bits = 0,
+		.frac_bits = 0,
+		.tcnt_mux = 13),
+
+	/* the gates */
+
+	/*
+	 * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
+	 * you have the debug bit set in the power manager, which we
+	 * don't bother exposing) are individual gates off of the
+	 * non-stop vpu clock.
+	 */
+	[BCM2835_CLOCK_PERI_IMAGE] = REGISTER_GATE(
+		SOC_ALL,
+		.name = "peri_image",
+		.parent = "vpu",
+		.ctl_reg = CM_PERIICTL),
+};
+
+/*
+ * Permanently take a reference on the parent of the SDRAM clock.
+ *
+ * While the SDRAM is being driven by its dedicated PLL most of the
+ * time, there is a little loop running in the firmware that
+ * periodically switches the SDRAM to using our CM clock to do PVT
+ * recalibration, with the assumption that the previously configured
+ * SDRAM parent is still enabled and running.
+ */
+static int bcm2835_mark_sdc_parent_critical(struct clk *sdc)
+{
+	struct clk *parent = clk_get_parent(sdc);
+
+	if (IS_ERR(parent))
+		return PTR_ERR(parent);
+
+	return clk_prepare_enable(parent);
+}
+
+static int bcm2835_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw **hws;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_clk_desc *desc;
+	const size_t asize = ARRAY_SIZE(clk_desc_array);
+	const struct cprman_plat_data *pdata;
+	size_t i;
+	int ret;
+
+	pdata = of_device_get_match_data(&pdev->dev);
+	if (!pdata)
+		return -ENODEV;
+
+	cprman = devm_kzalloc(dev,
+			      struct_size(cprman, onecell.hws, asize),
+			      GFP_KERNEL);
+	if (!cprman)
+		return -ENOMEM;
+
+	spin_lock_init(&cprman->regs_lock);
+	cprman->dev = dev;
+	cprman->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(cprman->regs))
+		return PTR_ERR(cprman->regs);
+
+	memcpy(cprman->real_parent_names, cprman_parent_names,
+	       sizeof(cprman_parent_names));
+	of_clk_parent_fill(dev->of_node, cprman->real_parent_names,
+			   ARRAY_SIZE(cprman_parent_names));
+
+	/*
+	 * Make sure the external oscillator has been registered.
+	 *
+	 * The other (DSI) clocks are not present on older device
+	 * trees, which we still need to support for backwards
+	 * compatibility.
+	 */
+	if (!cprman->real_parent_names[0])
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, cprman);
+
+	cprman->onecell.num = asize;
+	cprman->soc = pdata->soc;
+	hws = cprman->onecell.hws;
+
+	for (i = 0; i < asize; i++) {
+		desc = &clk_desc_array[i];
+		if (desc->clk_register && desc->data &&
+		    (desc->supported & pdata->soc)) {
+			hws[i] = desc->clk_register(cprman, desc->data);
+		}
+	}
+
+	ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk);
+	if (ret)
+		return ret;
+
+	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+				      &cprman->onecell);
+}
+
+static const struct cprman_plat_data cprman_bcm2835_plat_data = {
+	.soc = SOC_BCM2835,
+};
+
+static const struct cprman_plat_data cprman_bcm2711_plat_data = {
+	.soc = SOC_BCM2711,
+};
+
+static const struct of_device_id bcm2835_clk_of_match[] = {
+	{ .compatible = "brcm,bcm2835-cprman", .data = &cprman_bcm2835_plat_data },
+	{ .compatible = "brcm,bcm2711-cprman", .data = &cprman_bcm2711_plat_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
+
+static struct platform_driver bcm2835_clk_driver = {
+	.driver = {
+		.name = "bcm2835-clk",
+		.of_match_table = bcm2835_clk_of_match,
+	},
+	.probe          = bcm2835_clk_probe,
+};
+
+builtin_platform_driver(bcm2835_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("BCM2835 clock driver");