Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 246 insertions, 0 deletions

diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
new file mode 100644
index 0000000000..99da9bd86e
--- /dev/null
+++ b/drivers/clk/ingenic/cgu.h
@@ -0,0 +1,246 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Ingenic SoC CGU driver
+ *
+ * Copyright (c) 2013-2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@mips.com>
+ */
+
+#ifndef __DRIVERS_CLK_INGENIC_CGU_H__
+#define __DRIVERS_CLK_INGENIC_CGU_H__
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct ingenic_cgu_pll_info - information about a PLL
+ * @reg: the offset of the PLL's control register within the CGU
+ * @rate_multiplier: the multiplier needed by pll rate calculation
+ * @m_shift: the number of bits to shift the multiplier value by (ie. the
+ *           index of the lowest bit of the multiplier value in the PLL's
+ *           control register)
+ * @m_bits: the size of the multiplier field in bits
+ * @m_offset: the multiplier value which encodes to 0 in the PLL's control
+ *            register
+ * @n_shift: the number of bits to shift the divider value by (ie. the
+ *           index of the lowest bit of the divider value in the PLL's
+ *           control register)
+ * @n_bits: the size of the divider field in bits
+ * @n_offset: the divider value which encodes to 0 in the PLL's control
+ *            register
+ * @od_shift: the number of bits to shift the post-VCO divider value by (ie.
+ *            the index of the lowest bit of the post-VCO divider value in
+ *            the PLL's control register)
+ * @od_bits: the size of the post-VCO divider field in bits, or 0 if no
+ *	     OD field exists (then the OD is fixed to 1)
+ * @od_max: the maximum post-VCO divider value
+ * @od_encoding: a pointer to an array mapping post-VCO divider values to
+ *               their encoded values in the PLL control register, or -1 for
+ *               unsupported values
+ * @bypass_reg: the offset of the bypass control register within the CGU
+ * @bypass_bit: the index of the bypass bit in the PLL control register, or
+ *              -1 if there is no bypass bit
+ * @enable_bit: the index of the enable bit in the PLL control register, or
+ *		-1 if there is no enable bit (ie, the PLL is always on)
+ * @stable_bit: the index of the stable bit in the PLL control register, or
+ *		-1 if there is no stable bit
+ * @set_rate_hook: hook called immediately after updating the CGU register,
+ *		   before releasing the spinlock
+ */
+struct ingenic_cgu_pll_info {
+	unsigned reg;
+	unsigned rate_multiplier;
+	const s8 *od_encoding;
+	u8 m_shift, m_bits, m_offset;
+	u8 n_shift, n_bits, n_offset;
+	u8 od_shift, od_bits, od_max;
+	unsigned bypass_reg;
+	s8 bypass_bit;
+	s8 enable_bit;
+	s8 stable_bit;
+	void (*calc_m_n_od)(const struct ingenic_cgu_pll_info *pll_info,
+			    unsigned long rate, unsigned long parent_rate,
+			    unsigned int *m, unsigned int *n, unsigned int *od);
+	void (*set_rate_hook)(const struct ingenic_cgu_pll_info *pll_info,
+			      unsigned long rate, unsigned long parent_rate);
+};
+
+/**
+ * struct ingenic_cgu_mux_info - information about a clock mux
+ * @reg: offset of the mux control register within the CGU
+ * @shift: number of bits to shift the mux value by (ie. the index of
+ *         the lowest bit of the mux value within its control register)
+ * @bits: the size of the mux value in bits
+ */
+struct ingenic_cgu_mux_info {
+	unsigned reg;
+	u8 shift;
+	u8 bits;
+};
+
+/**
+ * struct ingenic_cgu_div_info - information about a divider
+ * @reg: offset of the divider control register within the CGU
+ * @shift: number of bits to left shift the divide value by (ie. the index of
+ *         the lowest bit of the divide value within its control register)
+ * @div: number to divide the divider value by (i.e. if the
+ *	 effective divider value is the value written to the register
+ *	 multiplied by some constant)
+ * @bits: the size of the divide value in bits
+ * @ce_bit: the index of the change enable bit within reg, or -1 if there
+ *          isn't one
+ * @busy_bit: the index of the busy bit within reg, or -1 if there isn't one
+ * @stop_bit: the index of the stop bit within reg, or -1 if there isn't one
+ * @bypass_mask: mask of parent clocks for which the divider does not apply
+ * @div_table: optional table to map the value read from the register to the
+ *             actual divider value
+ */
+struct ingenic_cgu_div_info {
+	unsigned reg;
+	u8 shift;
+	u8 div;
+	u8 bits;
+	s8 ce_bit;
+	s8 busy_bit;
+	s8 stop_bit;
+	u8 bypass_mask;
+	const u8 *div_table;
+};
+
+/**
+ * struct ingenic_cgu_fixdiv_info - information about a fixed divider
+ * @div: the divider applied to the parent clock
+ */
+struct ingenic_cgu_fixdiv_info {
+	unsigned div;
+};
+
+/**
+ * struct ingenic_cgu_gate_info - information about a clock gate
+ * @reg: offset of the gate control register within the CGU
+ * @bit: offset of the bit in the register that controls the gate
+ * @clear_to_gate: if set, the clock is gated when the bit is cleared
+ * @delay_us: delay in microseconds after which the clock is considered stable
+ */
+struct ingenic_cgu_gate_info {
+	unsigned reg;
+	u8 bit;
+	bool clear_to_gate;
+	u16 delay_us;
+};
+
+/**
+ * struct ingenic_cgu_custom_info - information about a custom (SoC) clock
+ * @clk_ops: custom clock operation callbacks
+ */
+struct ingenic_cgu_custom_info {
+	const struct clk_ops *clk_ops;
+};
+
+/**
+ * struct ingenic_cgu_clk_info - information about a clock
+ * @name: name of the clock
+ * @type: a bitmask formed from CGU_CLK_* values
+ * @flags: common clock flags to set on this clock
+ * @parents: an array of the indices of potential parents of this clock
+ *           within the clock_info array of the CGU, or -1 in entries
+ *           which correspond to no valid parent
+ * @pll: information valid if type includes CGU_CLK_PLL
+ * @gate: information valid if type includes CGU_CLK_GATE
+ * @mux: information valid if type includes CGU_CLK_MUX
+ * @div: information valid if type includes CGU_CLK_DIV
+ * @fixdiv: information valid if type includes CGU_CLK_FIXDIV
+ * @custom: information valid if type includes CGU_CLK_CUSTOM
+ */
+struct ingenic_cgu_clk_info {
+	const char *name;
+
+	enum {
+		CGU_CLK_NONE		= 0,
+		CGU_CLK_EXT		= BIT(0),
+		CGU_CLK_PLL		= BIT(1),
+		CGU_CLK_GATE		= BIT(2),
+		CGU_CLK_MUX		= BIT(3),
+		CGU_CLK_MUX_GLITCHFREE	= BIT(4),
+		CGU_CLK_DIV		= BIT(5),
+		CGU_CLK_FIXDIV		= BIT(6),
+		CGU_CLK_CUSTOM		= BIT(7),
+	} type;
+
+	unsigned long flags;
+
+	int parents[4];
+
+	union {
+		struct ingenic_cgu_pll_info pll;
+
+		struct {
+			struct ingenic_cgu_gate_info gate;
+			struct ingenic_cgu_mux_info mux;
+			struct ingenic_cgu_div_info div;
+			struct ingenic_cgu_fixdiv_info fixdiv;
+		};
+
+		struct ingenic_cgu_custom_info custom;
+	};
+};
+
+/**
+ * struct ingenic_cgu - data about the CGU
+ * @np: the device tree node that caused the CGU to be probed
+ * @base: the ioremap'ed base address of the CGU registers
+ * @clock_info: an array containing information about implemented clocks
+ * @clocks: used to provide clocks to DT, allows lookup of struct clk*
+ * @lock: lock to be held whilst manipulating CGU registers
+ */
+struct ingenic_cgu {
+	struct device_node *np;
+	void __iomem *base;
+
+	const struct ingenic_cgu_clk_info *clock_info;
+	struct clk_onecell_data clocks;
+
+	spinlock_t lock;
+};
+
+/**
+ * struct ingenic_clk - private data for a clock
+ * @hw: see Documentation/driver-api/clk.rst
+ * @cgu: a pointer to the CGU data
+ * @idx: the index of this clock in cgu->clock_info
+ */
+struct ingenic_clk {
+	struct clk_hw hw;
+	struct ingenic_cgu *cgu;
+	unsigned idx;
+};
+
+#define to_ingenic_clk(_hw) container_of(_hw, struct ingenic_clk, hw)
+
+/**
+ * ingenic_cgu_new() - create a new CGU instance
+ * @clock_info: an array of clock information structures describing the clocks
+ *              which are implemented by the CGU
+ * @num_clocks: the number of entries in clock_info
+ * @np: the device tree node which causes this CGU to be probed
+ *
+ * Return: a pointer to the CGU instance if initialisation is successful,
+ *         otherwise NULL.
+ */
+struct ingenic_cgu *
+ingenic_cgu_new(const struct ingenic_cgu_clk_info *clock_info,
+		unsigned num_clocks, struct device_node *np);
+
+/**
+ * ingenic_cgu_register_clocks() - Registers the clocks
+ * @cgu: pointer to cgu data
+ *
+ * Register the clocks described by the CGU with the common clock framework.
+ *
+ * Return: 0 on success or -errno if unsuccesful.
+ */
+int ingenic_cgu_register_clocks(struct ingenic_cgu *cgu);
+
+#endif /* __DRIVERS_CLK_INGENIC_CGU_H__ */