Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 257 insertions, 0 deletions

diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
new file mode 100644
index 0000000000..27e6b9cb18
--- /dev/null
+++ b/drivers/clk/ti/autoidle.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI clock autoidle support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+struct clk_ti_autoidle {
+	struct clk_omap_reg	reg;
+	u8			shift;
+	u8			flags;
+	const char		*name;
+	struct list_head	node;
+};
+
+#define AUTOIDLE_LOW		0x1
+
+static LIST_HEAD(autoidle_clks);
+
+/*
+ * we have some non-atomic read/write
+ * operations behind it, so lets
+ * take one lock for handling autoidle
+ * of all clocks
+ */
+static DEFINE_SPINLOCK(autoidle_spinlock);
+
+static int _omap2_clk_deny_idle(struct clk_hw_omap *clk)
+{
+	if (clk->ops && clk->ops->deny_idle) {
+		unsigned long irqflags;
+
+		spin_lock_irqsave(&autoidle_spinlock, irqflags);
+		clk->autoidle_count++;
+		if (clk->autoidle_count == 1)
+			clk->ops->deny_idle(clk);
+
+		spin_unlock_irqrestore(&autoidle_spinlock, irqflags);
+	}
+	return 0;
+}
+
+static int _omap2_clk_allow_idle(struct clk_hw_omap *clk)
+{
+	if (clk->ops && clk->ops->allow_idle) {
+		unsigned long irqflags;
+
+		spin_lock_irqsave(&autoidle_spinlock, irqflags);
+		clk->autoidle_count--;
+		if (clk->autoidle_count == 0)
+			clk->ops->allow_idle(clk);
+
+		spin_unlock_irqrestore(&autoidle_spinlock, irqflags);
+	}
+	return 0;
+}
+
+/**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+	struct clk_hw *hw;
+
+	if (!clk)
+		return -EINVAL;
+
+	hw = __clk_get_hw(clk);
+
+	if (omap2_clk_is_hw_omap(hw)) {
+		struct clk_hw_omap *c = to_clk_hw_omap(hw);
+
+		return _omap2_clk_deny_idle(c);
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+	struct clk_hw *hw;
+
+	if (!clk)
+		return -EINVAL;
+
+	hw = __clk_get_hw(clk);
+
+	if (omap2_clk_is_hw_omap(hw)) {
+		struct clk_hw_omap *c = to_clk_hw_omap(hw);
+
+		return _omap2_clk_allow_idle(c);
+	}
+
+	return -EINVAL;
+}
+
+static void _allow_autoidle(struct clk_ti_autoidle *clk)
+{
+	u32 val;
+
+	val = ti_clk_ll_ops->clk_readl(&clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val &= ~(1 << clk->shift);
+	else
+		val |= (1 << clk->shift);
+
+	ti_clk_ll_ops->clk_writel(val, &clk->reg);
+}
+
+static void _deny_autoidle(struct clk_ti_autoidle *clk)
+{
+	u32 val;
+
+	val = ti_clk_ll_ops->clk_readl(&clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val |= (1 << clk->shift);
+	else
+		val &= ~(1 << clk->shift);
+
+	ti_clk_ll_ops->clk_writel(val, &clk->reg);
+}
+
+/**
+ * _clk_generic_allow_autoidle_all - enable autoidle for all clocks
+ *
+ * Enables hardware autoidle for all registered DT clocks, which have
+ * the feature.
+ */
+static void _clk_generic_allow_autoidle_all(void)
+{
+	struct clk_ti_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		_allow_autoidle(c);
+}
+
+/**
+ * _clk_generic_deny_autoidle_all - disable autoidle for all clocks
+ *
+ * Disables hardware autoidle for all registered DT clocks, which have
+ * the feature.
+ */
+static void _clk_generic_deny_autoidle_all(void)
+{
+	struct clk_ti_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		_deny_autoidle(c);
+}
+
+/**
+ * of_ti_clk_autoidle_setup - sets up hardware autoidle for a clock
+ * @node: pointer to the clock device node
+ *
+ * Checks if a clock has hardware autoidle support or not (check
+ * for presence of 'ti,autoidle-shift' property in the device tree
+ * node) and sets up the hardware autoidle feature for the clock
+ * if available. If autoidle is available, the clock is also added
+ * to the autoidle list for later processing. Returns 0 on success,
+ * negative error value on failure.
+ */
+int __init of_ti_clk_autoidle_setup(struct device_node *node)
+{
+	u32 shift;
+	struct clk_ti_autoidle *clk;
+	int ret;
+
+	/* Check if this clock has autoidle support or not */
+	if (of_property_read_u32(node, "ti,autoidle-shift", &shift))
+		return 0;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+
+	if (!clk)
+		return -ENOMEM;
+
+	clk->shift = shift;
+	clk->name = ti_dt_clk_name(node);
+	ret = ti_clk_get_reg_addr(node, 0, &clk->reg);
+	if (ret) {
+		kfree(clk);
+		return ret;
+	}
+
+	if (of_property_read_bool(node, "ti,invert-autoidle-bit"))
+		clk->flags |= AUTOIDLE_LOW;
+
+	list_add(&clk->node, &autoidle_clks);
+
+	return 0;
+}
+
+/**
+ * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Enable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them.  This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code.  Returns 0.
+ */
+int omap2_clk_enable_autoidle_all(void)
+{
+	int ret;
+
+	ret = omap2_clk_for_each(_omap2_clk_allow_idle);
+	if (ret)
+		return ret;
+
+	_clk_generic_allow_autoidle_all();
+
+	return 0;
+}
+
+/**
+ * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Disable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them.  This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code.  Returns 0.
+ */
+int omap2_clk_disable_autoidle_all(void)
+{
+	int ret;
+
+	ret = omap2_clk_for_each(_omap2_clk_deny_idle);
+	if (ret)
+		return ret;
+
+	_clk_generic_deny_autoidle_all();
+
+	return 0;
+}