Adding upstream version 6.7.7.upstream/6.7.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 248 insertions, 11 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 0ba0dc4ec..34faa0320 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -732,4 +732,15 @@ config GOLDFISH_TIMER
 	help
 	  Support for the timer/counter of goldfish-rtc
 
+config EP93XX_TIMER
+	bool "Cirrus Logic ep93xx timer driver" if COMPILE_TEST
+	depends on ARCH_EP93XX
+	depends on GENERIC_CLOCKEVENTS
+	depends on HAS_IOMEM
+	select CLKSRC_MMIO
+	select TIMER_OF
+	help
+	  Enables support for the Cirrus Logic timer block
+	  EP93XX.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 368c3461d..4bb856e4d 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -89,3 +89,4 @@ obj-$(CONFIG_MSC313E_TIMER)		+= timer-msc313e.o
 obj-$(CONFIG_GOLDFISH_TIMER)		+= timer-goldfish.o
 obj-$(CONFIG_GXP_TIMER)			+= timer-gxp.o
 obj-$(CONFIG_CLKSRC_LOONGSON1_PWM)	+= timer-loongson1-pwm.o
+obj-$(CONFIG_EP93XX_TIMER)		+= timer-ep93xx.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 071b04f1e..e054de92d 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -918,7 +918,7 @@ static void arch_timer_evtstrm_enable(unsigned int divider)
 
 #ifdef CONFIG_ARM64
 	/* ECV is likely to require a large divider. Use the EVNTIS flag. */
-	if (cpus_have_const_cap(ARM64_HAS_ECV) && divider > 15) {
+	if (cpus_have_final_cap(ARM64_HAS_ECV) && divider > 15) {
 		cntkctl |= ARCH_TIMER_EVT_INTERVAL_SCALE;
 		divider -= 8;
 	}
@@ -956,6 +956,30 @@ static void arch_timer_configure_evtstream(void)
 	arch_timer_evtstrm_enable(max(0, lsb));
 }
 
+static int arch_timer_evtstrm_starting_cpu(unsigned int cpu)
+{
+	arch_timer_configure_evtstream();
+	return 0;
+}
+
+static int arch_timer_evtstrm_dying_cpu(unsigned int cpu)
+{
+	cpumask_clear_cpu(smp_processor_id(), &evtstrm_available);
+	return 0;
+}
+
+static int __init arch_timer_evtstrm_register(void)
+{
+	if (!arch_timer_evt || !evtstrm_enable)
+		return 0;
+
+	return cpuhp_setup_state(CPUHP_AP_ARM_ARCH_TIMER_EVTSTRM_STARTING,
+				 "clockevents/arm/arch_timer_evtstrm:starting",
+				 arch_timer_evtstrm_starting_cpu,
+				 arch_timer_evtstrm_dying_cpu);
+}
+core_initcall(arch_timer_evtstrm_register);
+
 static void arch_counter_set_user_access(void)
 {
 	u32 cntkctl = arch_timer_get_cntkctl();
@@ -1017,8 +1041,6 @@ static int arch_timer_starting_cpu(unsigned int cpu)
 	}
 
 	arch_counter_set_user_access();
-	if (evtstrm_enable)
-		arch_timer_configure_evtstream();
 
 	return 0;
 }
@@ -1165,8 +1187,6 @@ static int arch_timer_dying_cpu(unsigned int cpu)
 {
 	struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt);
 
-	cpumask_clear_cpu(smp_processor_id(), &evtstrm_available);
-
 	arch_timer_stop(clk);
 	return 0;
 }
@@ -1280,6 +1300,7 @@ out_unreg_notify:
 
 out_free:
 	free_percpu(arch_timer_evt);
+	arch_timer_evt = NULL;
 out:
 	return err;
 }
diff --git a/drivers/clocksource/timer-ep93xx.c b/drivers/clocksource/timer-ep93xx.c
new file mode 100644
index 000000000..6981ff3ac
--- /dev/null
+++ b/drivers/clocksource/timer-ep93xx.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cirrus Logic EP93xx timer driver.
+ * Copyright (C) 2021 Nikita Shubin <nikita.shubin@maquefel.me>
+ *
+ * Based on a rewrite of arch/arm/mach-ep93xx/timer.c:
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include <asm/mach/time.h>
+
+/*************************************************************************
+ * Timer handling for EP93xx
+ *************************************************************************
+ * The ep93xx has four internal timers.  Timers 1, 2 (both 16 bit) and
+ * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
+ * an interrupt on underflow.  Timer 4 (40 bit) counts down at 983.04 kHz,
+ * is free-running, and can't generate interrupts.
+ *
+ * The 508 kHz timers are ideal for use for the timer interrupt, as the
+ * most common values of HZ divide 508 kHz nicely.  We pick the 32 bit
+ * timer (timer 3) to get as long sleep intervals as possible when using
+ * CONFIG_NO_HZ.
+ *
+ * The higher clock rate of timer 4 makes it a better choice than the
+ * other timers for use as clock source and for sched_clock(), providing
+ * a stable 40 bit time base.
+ *************************************************************************
+ */
+
+#define EP93XX_TIMER1_LOAD		0x00
+#define EP93XX_TIMER1_VALUE		0x04
+#define EP93XX_TIMER1_CONTROL		0x08
+#define EP93XX_TIMER123_CONTROL_ENABLE	BIT(7)
+#define EP93XX_TIMER123_CONTROL_MODE	BIT(6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL	BIT(3)
+#define EP93XX_TIMER1_CLEAR		0x0c
+#define EP93XX_TIMER2_LOAD		0x20
+#define EP93XX_TIMER2_VALUE		0x24
+#define EP93XX_TIMER2_CONTROL		0x28
+#define EP93XX_TIMER2_CLEAR		0x2c
+/*
+ * This read-only register contains the low word of the time stamp debug timer
+ * ( Timer4). When this register is read, the high byte of the Timer4 counter is
+ * saved in the Timer4ValueHigh register.
+ */
+#define EP93XX_TIMER4_VALUE_LOW		0x60
+#define EP93XX_TIMER4_VALUE_HIGH	0x64
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE	BIT(8)
+#define EP93XX_TIMER3_LOAD		0x80
+#define EP93XX_TIMER3_VALUE		0x84
+#define EP93XX_TIMER3_CONTROL		0x88
+#define EP93XX_TIMER3_CLEAR		0x8c
+
+#define EP93XX_TIMER123_RATE		508469
+#define EP93XX_TIMER4_RATE		983040
+
+struct ep93xx_tcu {
+	void __iomem *base;
+};
+
+static struct ep93xx_tcu *ep93xx_tcu;
+
+static u64 ep93xx_clocksource_read(struct clocksource *c)
+{
+	struct ep93xx_tcu *tcu = ep93xx_tcu;
+
+	return lo_hi_readq(tcu->base + EP93XX_TIMER4_VALUE_LOW) & GENMASK_ULL(39, 0);
+}
+
+static u64 notrace ep93xx_read_sched_clock(void)
+{
+	return ep93xx_clocksource_read(NULL);
+}
+
+static int ep93xx_clkevt_set_next_event(unsigned long next,
+					struct clock_event_device *evt)
+{
+	struct ep93xx_tcu *tcu = ep93xx_tcu;
+	/* Default mode: periodic, off, 508 kHz */
+	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+	EP93XX_TIMER123_CONTROL_CLKSEL;
+
+	/* Clear timer */
+	writel(tmode, tcu->base + EP93XX_TIMER3_CONTROL);
+
+	/* Set next event */
+	writel(next, tcu->base + EP93XX_TIMER3_LOAD);
+	writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+	       tcu->base + EP93XX_TIMER3_CONTROL);
+	return 0;
+}
+
+static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
+{
+	struct ep93xx_tcu *tcu = ep93xx_tcu;
+	/* Disable timer */
+	writel(0, tcu->base + EP93XX_TIMER3_CONTROL);
+
+	return 0;
+}
+
+static struct clock_event_device ep93xx_clockevent = {
+	.name			= "timer1",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= ep93xx_clkevt_shutdown,
+	.set_state_oneshot	= ep93xx_clkevt_shutdown,
+	.tick_resume		= ep93xx_clkevt_shutdown,
+	.set_next_event		= ep93xx_clkevt_set_next_event,
+	.rating			= 300,
+};
+
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
+{
+	struct ep93xx_tcu *tcu = ep93xx_tcu;
+	struct clock_event_device *evt = dev_id;
+
+	/* Writing any value clears the timer interrupt */
+	writel(1, tcu->base + EP93XX_TIMER3_CLEAR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ep93xx_timer_of_init(struct device_node *np)
+{
+	int irq;
+	unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
+	struct ep93xx_tcu *tcu;
+	int ret;
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->base = of_iomap(np, 0);
+	if (!tcu->base) {
+		pr_err("Can't remap registers\n");
+		ret = -ENXIO;
+		goto out_free;
+	}
+
+	ep93xx_tcu = tcu;
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		ret = -EINVAL;
+		pr_err("EP93XX Timer Can't parse IRQ %d", irq);
+		goto out_free;
+	}
+
+	/* Enable and register clocksource and sched_clock on timer 4 */
+	writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+	       tcu->base + EP93XX_TIMER4_VALUE_HIGH);
+	clocksource_mmio_init(NULL, "timer4",
+				EP93XX_TIMER4_RATE, 200, 40,
+				ep93xx_clocksource_read);
+	sched_clock_register(ep93xx_read_sched_clock, 40,
+			     EP93XX_TIMER4_RATE);
+
+	/* Set up clockevent on timer 3 */
+	if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
+		&ep93xx_clockevent))
+		pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
+
+	clockevents_config_and_register(&ep93xx_clockevent,
+				EP93XX_TIMER123_RATE,
+				1,
+				UINT_MAX);
+
+	return 0;
+
+out_free:
+	kfree(tcu);
+	return ret;
+}
+TIMER_OF_DECLARE(ep93xx_timer, "cirrus,ep9301-timer", ep93xx_timer_of_init);
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index da3071b38..57857c0df 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -22,21 +22,32 @@
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/interrupt.h>
 #include <linux/of_irq.h>
+#include <linux/limits.h>
 #include <clocksource/timer-riscv.h>
 #include <asm/smp.h>
-#include <asm/hwcap.h>
+#include <asm/cpufeature.h>
 #include <asm/sbi.h>
 #include <asm/timex.h>
 
 static DEFINE_STATIC_KEY_FALSE(riscv_sstc_available);
 static bool riscv_timer_cannot_wake_cpu;
 
+static void riscv_clock_event_stop(void)
+{
+	if (static_branch_likely(&riscv_sstc_available)) {
+		csr_write(CSR_STIMECMP, ULONG_MAX);
+		if (IS_ENABLED(CONFIG_32BIT))
+			csr_write(CSR_STIMECMPH, ULONG_MAX);
+	} else {
+		sbi_set_timer(U64_MAX);
+	}
+}
+
 static int riscv_clock_next_event(unsigned long delta,
 		struct clock_event_device *ce)
 {
 	u64 next_tval = get_cycles64() + delta;
 
-	csr_set(CSR_IE, IE_TIE);
 	if (static_branch_likely(&riscv_sstc_available)) {
 #if defined(CONFIG_32BIT)
 		csr_write(CSR_STIMECMP, next_tval & 0xFFFFFFFF);
@@ -94,6 +105,8 @@ static int riscv_timer_starting_cpu(unsigned int cpu)
 	ce->irq = riscv_clock_event_irq;
 	if (riscv_timer_cannot_wake_cpu)
 		ce->features |= CLOCK_EVT_FEAT_C3STOP;
+	if (static_branch_likely(&riscv_sstc_available))
+		ce->rating = 450;
 	clockevents_config_and_register(ce, riscv_timebase, 100, 0x7fffffff);
 
 	enable_percpu_irq(riscv_clock_event_irq,
@@ -119,7 +132,7 @@ static irqreturn_t riscv_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
 
-	csr_clear(CSR_IE, IE_TIE);
+	riscv_clock_event_stop();
 	evdev->event_handler(evdev);
 
 	return IRQ_HANDLED;
@@ -212,6 +225,10 @@ TIMER_OF_DECLARE(riscv_timer, "riscv", riscv_timer_init_dt);
 #ifdef CONFIG_ACPI
 static int __init riscv_timer_acpi_init(struct acpi_table_header *table)
 {
+	struct acpi_table_rhct *rhct = (struct acpi_table_rhct *)table;
+
+	riscv_timer_cannot_wake_cpu = rhct->flags & ACPI_RHCT_TIMER_CANNOT_WAKEUP_CPU;
+
 	return riscv_timer_init_common();
 }
 
diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 69fee3540..0d229a905 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -256,10 +256,8 @@ static int sun5i_timer_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "Can't get IRQ\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(clk)) {